Issue 10, 2018

Water splitting by electrolysis at high current densities under 1.6 volts

Abstract

Splitting water into hydrogen and oxygen by electrolysis using electricity from intermittent waste heat, wind, or solar energies is one of the easiest and cleanest methods for high-purity hydrogen production and an effective way to store the excess electrical power. The key dilemma for efficient large-scale production of hydrogen by splitting of water via the hydrogen and oxygen evolution reactions (HER and OER, respectively) is the high overpotential required, especially for the OER. We report an exceptionally active and durable OER catalyst yielding current densities of 500 and 1000 mA cm−2 at overpotentials of only 259 mV and 289 mV in alkaline electrolyte, respectively, fulfilling the commercial criteria of the OER process. Together with a good HER catalyst, we have achieved the commercially required current densities of 500 and 1000 mA cm−2 at 1.586 and 1.657 V, respectively, with very good stability, dramatically lower than any previously reported voltage. This discovery sets the stage for large-scale hydrogen production by water splitting using excess electrical power whenever and wherever available.

Graphical abstract: Water splitting by electrolysis at high current densities under 1.6 volts

Supplementary files

Article information

Article type
Paper
Submitted
29 Нау. 2018
Accepted
31 Мам. 2018
First published
31 Мам. 2018

Energy Environ. Sci., 2018,11, 2858-2864

Author version available

Water splitting by electrolysis at high current densities under 1.6 volts

H. Zhou, F. Yu, Q. Zhu, J. Sun, F. Qin, L. Yu, J. Bao, Y. Yu, S. Chen and Z. Ren, Energy Environ. Sci., 2018, 11, 2858 DOI: 10.1039/C8EE00927A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements