Issue 36, 2018

Polyoxometalate-based metal–organic framework loaded with an ultra-low amount of Pt as an efficient electrocatalyst for hydrogen production

Abstract

The development of highly active and stable electrocatalysts for HER has been received extensive attention. Among these, minimizing the Pt usage and promoting its utilization efficiency are essential prerequisites for a future hydrogen economy. Herein, we use a new ε-Keggin-type polyoxometalate-based metal–organic framework H3[Zn4(bimb)2][PMoV8MoVI4O40]·12H2O (POMOF-1) as a support to load a low amount of ultrasmall Pt nanoparticles (NPs), and then mix this material with Ketjenblack carbon (KB) to form a new composite catalyst (Pt@POMOF-1/KB). This composite catalyst shows a low Pt loading amount of 0.43 wt% and the average size of the Pt NPs is 1.5 nm. Pt@POMOF-1/KB exhibits a remarkable HER performance in 0.5 M H2SO4. It only requires an overpotential to of 23 mV to observe a current density of 10 mA cm−2, which is superior to that of 20% Pt/C. The mass activity of Pt@POMOF-1/KB is almost 100 and 37 times that of 20% Pt/C at overpotentials of 50 and 100 mV, respectively, as a consequence of the very low noble-metal loading. This result may provide an approach to meet the cost requirements for large-scale applications.

Graphical abstract: Polyoxometalate-based metal–organic framework loaded with an ultra-low amount of Pt as an efficient electrocatalyst for hydrogen production

Supplementary files

Article information

Article type
Paper
Submitted
13 Шіл. 2018
Accepted
12 Там. 2018
First published
13 Там. 2018

CrystEngComm, 2018,20, 5387-5394

Polyoxometalate-based metal–organic framework loaded with an ultra-low amount of Pt as an efficient electrocatalyst for hydrogen production

H. Peng, X. Yang, Y. Ma, J. Liu, Y. Wang, H. Tan and Y. Li, CrystEngComm, 2018, 20, 5387 DOI: 10.1039/C8CE01151F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements