Issue 7, 2017

Catalytic glycerol hydrogenolysis to 1,3-propanediol in a gas–solid fluidized bed

Abstract

Glycerol is a potential feedstock to produce 1,3-propanediol (1,3-PDO), which is a valuable commercial polyester monomer. Here, we report the gas-phase glycerol hydrogenolysis to 1,3-propanediol over Pt/WO3/Al2O3 in a fluidized bed operating above 240 °C and at ambient pressure. Fluidized beds are ideal contactors for this reaction because the heat transfer rates are sufficiently high to vaporize glycerol thereby minimizing its combustion and thermal degradation. The yield of 1,3-PDO approached 14% after 2 h at 260 °C. The major co-products were 1,2-PDO (18%), 1-propanol (28%) and 2-propanol (15%). In the first step, glycerol may dehydrate to acrolein, followed by rehydration to 3-hydroxypropanal and then hydrogenation to 1,3-PDO. The concentrations of the by-products including acrolein, ethylene glycol, propane, and acetone increased with increasing temperature.

Graphical abstract: Catalytic glycerol hydrogenolysis to 1,3-propanediol in a gas–solid fluidized bed

Article information

Article type
Paper
Submitted
23 Қар. 2016
Accepted
26 Қар. 2016
First published
13 Қаң. 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 3853-3860

Catalytic glycerol hydrogenolysis to 1,3-propanediol in a gas–solid fluidized bed

M. Edake, M. Dalil, M. J. Darabi Mahboub, J. Dubois and G. S. Patience, RSC Adv., 2017, 7, 3853 DOI: 10.1039/C6RA27248G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements