Issue 34, 2017

Norbornene-modified poly(glycerol sebacate) as a photocurable and biodegradable elastomer

Abstract

Poly(glycerol sebacate) (PGS) is a biodegradable elastomer that has emerged as a promising material in biomedical applications; however, the traditional thermal crosslinking of PGS limits its processing in the fabrication of three-dimensional (3D) scaffolds. Here, we designed a new photocurable PGS that uses thiol–ene click chemistry to control PGS crosslinking. Specifically, norbornene-functionalized PGS (Nor-PGS) macromers were crosslinked by varied amounts of a 4-arm thiolated crosslinker to program properties such as mechanics and degradation. The Nor-PGS crosslinked rapidly (<1 min to plateau modulus) under ultraviolet light and the storage modulus was dependent on the crosslinker amount, with a maximum storage modulus observed with an equimolar norbornene/thiol ratio. Tensile properties of Nor-PGS were also altered by the crosslinker concentration, with a simultaneous increase in elastic modulus and failure stress and decrease in elongation (ranging from ∼170–240%) with higher crosslinker concentrations. In turn, the degradation of Nor-PGS was faster with lower crosslinker concentrations. To illustrate the processing of Nor-PGS, porous scaffolds with a range of sizes and shapes were fabricated using extrusion-based 3D printing, where the viscous macromer was extruded and crosslinked with continuous ultraviolet light exposure. Printed scaffolds supported the culture and proliferation of fibroblasts. These results indicate that crosslinked Nor-PGS is a promising functional elastomer for the fabrication of property-controllable scaffolds for biomedical applications.

Graphical abstract: Norbornene-modified poly(glycerol sebacate) as a photocurable and biodegradable elastomer

Supplementary files

Article information

Article type
Paper
Submitted
26 Ақп. 2017
Accepted
27 Нау. 2017
First published
04 Сәу. 2017

Polym. Chem., 2017,8, 5091-5099

Norbornene-modified poly(glycerol sebacate) as a photocurable and biodegradable elastomer

Y. Yeh, L. Ouyang, C. B. Highley and J. A. Burdick, Polym. Chem., 2017, 8, 5091 DOI: 10.1039/C7PY00323D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements