Issue 4, 2016

Electrospun fibers of chitosan-grafted polycaprolactone/poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) blends

Abstract

Chitosan-grafted polycaprolactone (CS-g-PCL)/poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) fiber blends were prepared via wet electrospinning, and their morphology, hydrophilicity, water absorption, biodegradation, cytotoxicity, and thermal, mechanical and antibacterial properties were analyzed. IR spectra revealed strong H-bonding interactions between CS-g-PCL and PHBHHx. SEM and DSC analysis confirmed the immiscibility of the blends at all compositions studied. As the proportion of CS-g-PCL increased, the overall crystallinity of the blends increased, the melting temperature of PCL decreased, and each component promoted the crystallization of the others. The hydrophilicity, water absorption and weight loss in buffered solution decreased as the PHBHHx content increased. DMA and tensile tests indicated a synergistic effect on the mechanical properties at a blend composition of 70/30, leading to an optimal combination of stiffness, strength, ductility and toughness. The fibers retained adequate rigidity and strength under physiological conditions. The 70/30 blend exhibited the highest biocide action against Gram-positive and Gram-negative bacteria. The fibers did not induce toxicity over human dermal fibroblasts. These biodegradable, biocompatible electrospun fibers could be used as scaffolds for tissue engineering.

Graphical abstract: Electrospun fibers of chitosan-grafted polycaprolactone/poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) blends

Supplementary files

Article information

Article type
Paper
Submitted
08 Қыр. 2015
Accepted
03 Жел. 2015
First published
18 Жел. 2015

J. Mater. Chem. B, 2016,4, 600-612

Electrospun fibers of chitosan-grafted polycaprolactone/poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) blends

A. M. Díez-Pascual and A. L. Díez-Vicente, J. Mater. Chem. B, 2016, 4, 600 DOI: 10.1039/C5TB01861G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements