Advanced metal oxide infiltrated electrodes for boosting the performance of solid oxide cells

Alodia Orera, Alejandro Betato, Jorge Silva-Treviño, Ángel Larrea and Miguel Á. Laguna-Bercero

J. Mater. Chem. A, 2022, 10, 2541
DOI: 10.1039/D1TA07902F

Additive-free Li4Ti5O12 thick electrodes for Li-ion batteries with high electrochemical performance

M. E. Sotomayor, C. de la Torre-Gamarra, W. Bucheli, J. M. Amarilla, A. Varez, B. Levenfeld and J.-Y. Sanchez

J. Mater. Chem. A, 2018, 6, 5952
DOI: 10.1039/C7TA10683A

Microtubular solid oxide fuel cells fabricated by gel-casting: the role of supporting microstructure on the mechanical properties

M. Morales and M. A. Laguna-Bercero

RSC Adv., 2017, 7, 17620
DOI: 10.1039/C7RA01259D

Ultra-thick battery electrodes for high gravimetric and volumetric energy density Li-ion batteries

Maria Eugenia Sotomayor, Carmen de la Torre-Gamarra, Belen Levenfeld, Jean-Yves Sanchez, Alejandro Varez, Guk-Tae Kim, Alberto Varzi and Stefano Passerini

Journal of Power Sources, 2019, 437, 226923
DOI: 10.1016/j.jpowsour.2019.226923

The influence of the reducing conditions on the final microstructure and performance of nickel-yttria stabilized zirconia cermets

Hernán Monzón and Miguel A. Laguna-Bercero

Electrochimica Acta, 2016, 221, 41
DOI: 10.1016/j.electacta.2016.10.152

Design and characterization of macroporous alumina membranes for passive samplers of water contaminants

Victor M. Orera, Jorge Silva, Helena Franquet-Griell and Silvia Lacorte

Journal of the European Ceramic Society, 2018, 38, 1853
DOI: 10.1016/j.jeurceramsoc.2017.12.012

Reversible operation performance of microtubular solid oxide cells with a nickelate-based oxygen electrode

M.A. Morales-Zapata, A. Larrea and M.A. Laguna-Bercero

International Journal of Hydrogen Energy, 2020, 45, 5535
DOI: 10.1016/j.ijhydene.2019.05.122

Porous Ni-YSZ planar anodes by powder extrusion moulding employing PMMA as pore former

M. E. Sotomayor, B. I. Arias-Serrano, J. Ciruelos, A. Várez and B. Levenfeld

Powder Metallurgy, 2016, 59, 281
DOI: 10.1080/00325899.2016.1207919

The effect of pore-former morphology on the electrochemical performance of solid oxide fuel cells under combined fuel cell and electrolysis modes

Miguel A. Laguna-Bercero, Amir R. Hanifi, Lucile Menand, Navjot K. Sandhu, Neil E. Anderson, Thomas H. Etsell and Partha Sarkar

Electrochimica Acta, 2018, 268, 195
DOI: 10.1016/j.electacta.2018.02.055

Influence of Anode Functional Layers on Electrochemical Performance and Mechanical Strength in Microtubular Solid Oxide Fuel Cells Fabricated by Gel-Casting

Miguel Morales and Miguel Ángel Laguna-Bercero

ACS Appl. Energy Mater., 2018, 1, 2024
DOI: 10.1021/acsaem.8b00115

Evaluation of the sintering regime on the mechanical and physical properties of the NiO – YSZ anode support tubes

Ali Murat Soydan, Osman Yagiz Akduman, Abdullatif Durgun and Recep Akdeniz

International Journal of Hydrogen Energy, 2017, 42, 26933
DOI: 10.1016/j.ijhydene.2017.06.022

Reversible operation of microtubular solid oxide cells using La0.6Sr0.4Co0.2Fe0.8O3-δ-Ce0.9Gd0.1O2-δ oxygen electrodes

M.J. López-Robledo, M.A. Laguna-Bercero, A. Larrea and V.M. Orera

Journal of Power Sources, 2018, 378, 184
DOI: 10.1016/j.jpowsour.2017.12.035

Controlled aqueous crystallization of gadolinia doped ceria micron-thick ceramic electrolyte for solid oxide fuel cell

Haoyu Zhao, Qiuqiu Lyu, Yuhao Wang, Hao Sun, Hongxia Qu, Qin Zhong and Tenglong Zhu

Journal of Power Sources, 2025, 644, 237114
DOI: 10.1016/j.jpowsour.2025.237114

Performance and Stability of Infiltrated Praseodymium Nickelate Cathodes for Low-Temperature Fuel Cell Applications

Sajad Vafaeenezhad, Miguel A. Morales-Zapata, Amir Reza Hanifi, Miguel A. Laguna-Bercero, Ángel Larrea, Partha Sarkar and Thomas H. Etsell

SSRN Journal, 2022
DOI: 10.2139/ssrn.4093770

CO2 and steam electrolysis using a microtubular solid oxide cell

Hernán Monzón and Miguel A Laguna-Bercero

J. Phys. Energy, 2020, 2, 014005
DOI: 10.1088/2515-7655/ab4250

Boosting the performance of bolt-microtubular solid oxide fuel cells through surface pattern tuning

Sezer Onbilgin, Tolga Altan, Cigdem Timurkutluk and Bora Timurkutluk

Journal of the European Ceramic Society, 2024, 44, 7092
DOI: 10.1016/j.jeurceramsoc.2024.05.018

Highly stable microtubular cells for portable solid oxide fuel cell applications

H. Monzón and M.A. Laguna-Bercero

Electrochimica Acta, 2016, 222, 1622
DOI: 10.1016/j.electacta.2016.11.150

Ascendable method for the fabrication of micro-tubular solid oxide fuel cells by ram-extrusion technique

Jorge Durango-Petro, Jonathan Usuba, Hernan Valle, Gonzalo Abarzua, Host Flies, R. Udayabhaskar and R.V. Mangalaraja

Ceramics International, 2020, 46, 2602
DOI: 10.1016/j.ceramint.2019.08.252

High mass loading additive-free LiFePO4 cathodes with 500 μm thickness for high areal capacity Li-ion batteries

Carmen de la Torre-Gamarra, María Eugenia Sotomayor, Jean-Yves Sanchez, Belén Levenfeld, Alejandro Várez, Barbara Laïk and Jean-Pierre Pereira-Ramos

Journal of Power Sources, 2020, 458, 228033
DOI: 10.1016/j.jpowsour.2020.228033

Stability of infiltrated cathodes using Pr2NiO4+delta precursor for low-temperature fuel cell applications

Sajad Vafaeenezhad, Miguel A. Morales-Zapata, Amir Reza Hanifi, Miguel A. Laguna-Bercero, Ángel Larrea, Partha Sarkar and Thomas H. Etsell

International Journal of Hydrogen Energy, 2022, 47, 35081
DOI: 10.1016/j.ijhydene.2022.08.108