Md. Rezaur Rahman, Sinin Hamdan, Josephine Lai Chang Hui, A. Hasan, A.A. Khan, Md. A. Mannan, C.N. Hipolito, N. Mohamed Sutan, Al-K. Hj. Othman, M.R. Kabit and N. Abdul Wahab

MATEC Web Conf., 2017, 87, 03013
DOI: 10.1051/matecconf/20178703013

Physicochemical characterisation of bio-based insulation to explain their hygrothermal behaviour

Abbie Romano, Sotirios Grammatikos, Mike Riley and Ana Bras

Construction and Building Materials, 2020, 258, 120163
DOI: 10.1016/j.conbuildmat.2020.120163

Integrated effect of NH2-functionalized/triazine based covalent organic framework black phosphorus on reducing fire hazards of epoxy nanocomposites

Shuilai Qiu, Bin Zou, Tao Zhang, Xiyun Ren, Bin Yu, Yifan Zhou, Yongchun Kan and Yuan Hu

Chemical Engineering Journal, 2020, 401, 126058
DOI: 10.1016/j.cej.2020.126058

Dehydration Pathways for Glucose and Cellobiose During Fast Pyrolysis

Mckay W. Easton, John J. Nash and Hilkka I. Kenttämaa

J. Phys. Chem. A, 2018, 122, 8071
DOI: 10.1021/acs.jpca.8b02312

Thermal decomposition and combustion chemistry of cellulosic biomass

A.L. Sullivan and R. Ball

Atmospheric Environment, 2012, 47, 133
DOI: 10.1016/j.atmosenv.2011.11.022

The facts and hypotheses relating to the phenomenological model of cellulose pyrolysis

Vadim Mamleev, Serge Bourbigot, Michel Le Bras and Jacques Yvon

Journal of Analytical and Applied Pyrolysis, 2009, 84, 1
DOI: 10.1016/j.jaap.2008.10.014

Efficient Conversion of Cellulose to Levulinic Acid by Hydrothermal Treatment Using Zirconium Dioxide as a Recyclable Solid Acid Catalyst

Sunil S. Joshi, Amit D. Zodge, Kiran V. Pandare and Bhaskar D. Kulkarni

Ind. Eng. Chem. Res., 2014, 53, 18796
DOI: 10.1021/ie5011838

Determination of specific heat capacity of bio-fibre earth mortars stabilised at different relative humidities using Differential Scanning Calorimetry

A. Romano, S. Grammatikos, M. Riley and A. Bras

Journal of Building Engineering, 2021, 41, 102738
DOI: 10.1016/j.jobe.2021.102738

High‐Temperature Viscoelastic Relaxation in All‐Cellulose Composites

Benoît J.C. Duchemin, Mark P. Staiger and Roger H. Newman

Macromolecular Symposia, 2014, 340, 52
DOI: 10.1002/masy.201300123

A numerical and experimental study on fast pyrolysis of single woody biomass particles

Hamid Rezaei, Shahab Sokhansanj, Xiaotao Bi, C. Jim Lim and Anthony Lau

Applied Energy, 2017, 198, 320
DOI: 10.1016/j.apenergy.2016.11.032

Partial Oxidative and Catalytic Biomass Gasification in Supercritical Water: A Promising Flow Reactor System

Takuya Yoshida and Yoshito Oshima

Ind. Eng. Chem. Res., 2004, 43, 4097
DOI: 10.1021/ie034312x

Impact of α‐cellulose as a green filler on physico‐mechanical properties of a solution grade styrene‐butadiene rubber based tire‐tread compound

Koushik Pal, Soumya Ghosh Chowdhury, Dipankar Mondal, Dipankar Chattopadhyay, Sanjay Kumar Bhattacharyya and Rabindra Mukhopadhyay

Polymer Engineering & Sci, 2021, 61, 3017
DOI: 10.1002/pen.25814

Application of Water Mist Fire Suppression Systems in Small Retail Shops

W. K. Chow, B. Yao and M. Y. Ng

Journal of Fire Sciences, 2002, 20, 479
DOI: 10.1177/0734904102020006670

Development of empirical drying correlations for ground wood chip and ground wood pellet particles

Hamid Rezaei, C. Jim Lim, Anthony Lau, Xiaotao Bi and Shahab Sokhansanj

Drying Technology, 2017, 35, 1423
DOI: 10.1080/07373937.2016.1198912

A Comparative Experimental Study on Heat Release Rates of Charring and Noncharring Solid Combustible Materials

Changkun Chen, Bin Yao, Weicheng Fan and Guangxuan Liao

Journal of Fire Sciences, 2003, 21, 369
DOI: 10.1177/0734904103036091

Combustion Behavior of Cellulose Ester Fibrous Bundles from Used Cigarette Filters: Kinetic Analysis Study

Filip Veljković, Vladimir Dodevski, Milena Marinović-Cincović, Suzana Veličković and Bojan Janković

Polymers, 2024, 16, 1480
DOI: 10.3390/polym16111480

Wildland surface fire spread modelling, 1990 - 2007. 1: Physical and quasi-physical models

Andrew L. Sullivan

Int. J. Wildland Fire, 2009, 18, 349
DOI: 10.1071/WF06143

ZrB 2–SiC ceramics toughened with oriented paper-derived graphite for a sustainable approach

Luca Zoli, Francesca Servadei, Simone Failla, Matteo Mor, Antonio Vinci, Pietro Galizia and Diletta Sciti

Journal of Advanced Ceramics, 2024, 13, 207
DOI: 10.26599/JAC.2024.9220842

Effect of Compatibilizer on Mechanical, Morphological, and Thermal Properties of Chemimechanical Pulp-reinforced PP Composites

S. M. Zabihzadeh, G. Ebrahimi and A. A. Enayati

Journal of Thermoplastic Composite Materials, 2011, 24, 221
DOI: 10.1177/0892705710387048

Exploring Microcrystalline Cellulose (MCC) as a Green Multifunctional Additive (MFA) in a Typical Solution-Grade Styrene Butadiene Rubber (S-SBR)-Based Tread Compound

Sanjay Kumar Bhattacharyya, Bhavani Shanker Parmar, Abhijit Chakraborty, Saikat Dasgupta, Rabindra Mukhopadhyay and Abhijit Bandyopadhyay

Ind. Eng. Chem. Res., 2012, 51, 10649
DOI: 10.1021/ie301268e

Hydrothermal Carbonization of Municipal Waste Streams

Nicole D. Berge, Kyoung S. Ro, Jingdong Mao, Joseph R. V. Flora, Mark A. Chappell and Sunyoung Bae

Environ. Sci. Technol., 2011, 45, 5696
DOI: 10.1021/es2004528

Influence of Ionic Additives on the Pyrolysis Behavior of Paper

Karin Stadlmann, Christian W. Klampfl and Andreas J. Zemann

AJAC, 2017, 08, 774
DOI: 10.4236/ajac.2017.812056

Evaluation of Joint Management of Pine Wood Waste and Residual Microalgae for Agricultural Application

José Guillermo Rosas, Natalia Gómez, Jorge Cara-Jiménez, Judith González-Arias, Miguel Ángel Olego and Marta E. Sánchez

Sustainability, 2020, 13, 53
DOI: 10.3390/su13010053

Kinetics of Cellulose Deposition in Developing Cotton Fibers Studied by Thermogravimetric Analysis

Luis Cabrales and Noureddine Abidi

Fibers, 2019, 7, 78
DOI: 10.3390/fib7090078

Partial replacement of silica with microcrystalline cellulose in rubber composites

Wen Bai and Kaichang Li

Composites Part A: Applied Science and Manufacturing, 2009, 40, 1597
DOI: 10.1016/j.compositesa.2009.07.006

Quantitative and qualitative analysis of hemicellulose, cellulose and lignin bio-oils by comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Chrysoula Michailof, Themistoklis Sfetsas, Stylianos Stefanidis, Konstantinos Kalogiannis, Georgios Theodoridis and Angelos Lappas

Journal of Chromatography A, 2014, 1369, 147
DOI: 10.1016/j.chroma.2014.10.020

The Effect of Molding Conditions on the Mechanical and Color Properties of Cellulose Fiber Reinforced Composites

Si Ha, Haruhiro Ino, Teruo Kimura and Akihiro Suzuoka

Seikei-Kakou, 2014, 26, 221
DOI: 10.4325/seikeikakou.26.221

Thermal degradation of commercially available woods in South Asia: a study on physical properties

Samiul Kaiser, M. Salim Kaiser and S. Reaz Ahmed

Advances in Materials and Processing Technologies, 2023, 9, 1541
DOI: 10.1080/2374068X.2022.2127809

Novel Composites Based on a Natural Raw Material and Silylated Polystyrene

Tamara Tatrishvili, Omar Mukbaniani, Nikolozi Kvinikadze, Shota Chikhladze, Tinatini Bukia, Gia Petriashvili, Nana Pirtskheliani and Tamar Makharadze

ChChT, 2024, 18, 580
DOI: 10.23939/chcht18.04.580

Quantitative flash pyrolysis Fourier transform infrared spectroscopy of organic materials

Richard W. Court and Mark A. Sephton

Analytica Chimica Acta, 2009, 639, 62
DOI: 10.1016/j.aca.2009.02.042