Issue 5, 2020

Realising biaxial reinforcement via orientation-induced anisotropic swelling in graphene-based elastomers

Abstract

The biaxial mechanical properties constitute another remarkable advantage of graphene, but their evaluation has been overlooked in polymer nanocomposites. Herein, we provided an innovative and practical method to characterise biaxial reinforcement from graphene via swelling of elastomers, where graphene nanoplatelets (GNPs) were controlled to be oriented in-plane. The in-plane-aligned graphene imposed a biaxial constraining force to the elastomer during the swelling process that led to the anisotropic swelling behaviour of the bulk nanocomposites. This unconventional swelling behaviour was successfully modelled using statistical mechanics. Novel in situ Raman band shift measurements were also performed during the de-swelling process of the samples. The characteristic 2D band shift of the GNPs, imposed by stress transfer during the de-swelling procedure, was of the order of 0.1 cm−1 per % strain, enabling the calculation of the effective biaxial Young's modulus of the GNPs in the nanocomposites (∼2 GPa). The determination of the biaxial modulus of GNPs contributed to the evaluation of their Poisson's ratio (∼0.34), which is very important but highly impractical to be measured directly on a nanoscale-sized specimen.

Graphical abstract: Realising biaxial reinforcement via orientation-induced anisotropic swelling in graphene-based elastomers

Supplementary files

Article information

Article type
Paper
Submitted
23 11 2019
Accepted
13 1 2020
First published
13 1 2020

Nanoscale, 2020,12, 3377-3386

Realising biaxial reinforcement via orientation-induced anisotropic swelling in graphene-based elastomers

M. Liu, I. A. Kinloch, R. J. Young and D. G. Papageorgiou, Nanoscale, 2020, 12, 3377 DOI: 10.1039/C9NR09988C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements