Issue 4, 2018

Low-force spectroscopy on graphene membranes by scanning tunneling microscopy

Abstract

Two-dimensional atomically flat sheets with a high mechanical flexibility are very attractive as ultrathin membranes but are also inherently challenging for microscopic investigations. We report on a method using Scanning Tunneling Microscopy (STM) under ultra-high vacuum conditions for non-indenting low-force spectroscopy on micrometer-sized freestanding graphene membranes. The method is based on applying quasi-static voltage ramps with active feedback at low tunneling currents and ultimately relies on the attractive electrostatic force between the tip and the membrane. As a result a bulge-test scenario can be established. The convenience and simplicity of the method relies on the fact that the loading force and the membrane deflection detection are both provided simultaneously by the STM. This permits the continuous measurement of the stress–strain relation. Electrostatic forces applied are typically below 1 nN and the membrane deflection is detected at sub-nanometer resolution. Experiments on single-layer graphene membranes with a strain of 0.1% reveal a two-dimensional elastic modulus E2D = 220 N m−1.

Graphical abstract: Low-force spectroscopy on graphene membranes by scanning tunneling microscopy

Supplementary files

Article information

Article type
Paper
Submitted
30 9 2017
Accepted
01 1 2018
First published
04 1 2018

Nanoscale, 2018,10, 2148-2153

Low-force spectroscopy on graphene membranes by scanning tunneling microscopy

B. Uder, H. Gao, P. Kunnas, N. de Jonge and U. Hartmann, Nanoscale, 2018, 10, 2148 DOI: 10.1039/C7NR07300C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements