Issue 7, 2022

Delicate crystallinity control enables high-efficiency P3HT organic photovoltaic cells

Abstract

As a benchmark semiconducting polymer, poly(3-hexyl-thiophene) (P3HT) has been broadly used to construct a wide range of organic electronic devices such as photovoltaic cells, photodetectors, thermoelectrics, and transistors. In the last two decades, numerous studies have concentrated on modulating the morphology and performance of organic solar cells based on P3HT and fullerene derivatives. In comparison with P3HT:fullerene systems, the blends of P3HT with emerging nonfullerene acceptors remain significantly less explored and the structure–performance relationships are not well established. In this work, time-dependent grazing incidence X-ray scattering and real-space microscopy experiments were carried out to monitor the microstructure change of the high-efficiency blend of P3HT and a Y6-type nonfullerene acceptor (i.e., ZY-4Cl) over the duration of thermal annealing. By precisely manipulating the crystalline order of both the donor and acceptor, we found that simply shortening the annealing time can cause a remarkable 19-fold increase in the solar cell efficiency. We observed profound changes in all the photovoltaic parameters (open-circuit voltage, current density, fill factor, and power conversion efficiency) within the first 1 minute, while a slight variation emerged in the later stage. Attractively, the P3HT:ZY-4Cl blend film subject to thermal annealing for merely 30 seconds gave rise to a remarkable power conversion efficiency of ∼10.7%, which is the best efficiency of P3HT-based organic photovoltaic cells at present. The research shed light on the morphological optimization and cost-effective processing of polythiophene:nonfullerene blends for optoelectronic applications.

Graphical abstract: Delicate crystallinity control enables high-efficiency P3HT organic photovoltaic cells

Supplementary files

Article information

Article type
Paper
Submitted
27 11 2021
Accepted
03 1 2022
First published
04 1 2022

J. Mater. Chem. A, 2022,10, 3418-3429

Delicate crystallinity control enables high-efficiency P3HT organic photovoltaic cells

K. Xian, Y. Liu, J. Liu, J. Yu, Y. Xing, Z. Peng, K. Zhou, M. Gao, W. Zhao, G. Lu, J. Zhang, J. Hou, Y. Geng and L. Ye, J. Mater. Chem. A, 2022, 10, 3418 DOI: 10.1039/D1TA10161G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements