Issue 2, 2020

High-κ polymers of intrinsic microporosity: a new class of high temperature and low loss dielectrics for printed electronics

Abstract

High performance polymer dielectrics are a key component for printed electronics. In this work, organo-soluble polymers of intrinsic microporosity (PIMs) are reported for the first time to demonstrate desirable dielectric properties with a high permittivity (or κ), heat resistance, and low dielectric loss simultaneously. Due to the highly dipolar sulfonyl side groups (4.5 D) and rigid contorted polymer backbone, a sulfonylated PIM (SO2-PIM) enabled friction-free rotation of sulfonyl dipoles in the nanopores. As such, an optimal balance between relatively high κ and low dielectric loss is achieved in a broad temperature window (−50–200 °C). For example, the discharged energy density reached 17 J cm−3 with κ = 6.0. The discharge efficiency was 94% at 150 °C/300 MV m−1 and 88% at 200 °C/200 MV m−1. Furthermore, its application as a high-κ gate dielectric in field effect transistors (FETs) is demonstrated. With the bilayer SO2-PIM/SiO2 gate dielectric, InSe FETs exhibited a high electron mobility in the range of 200–400 cm2 V−1 s−1, as compared to 40 cm2 V−1 s−1 for the bare SiO2-gated InSe FET. This study indicates that highly dipolar PIMs with a rigid polymer backbone and large free volume are promising as next generation gate dielectric materials for printed electronics.

Graphical abstract: High-κ polymers of intrinsic microporosity: a new class of high temperature and low loss dielectrics for printed electronics

Supplementary files

Article information

Article type
Communication
Submitted
13 8 2019
Accepted
31 10 2019
First published
31 10 2019

Mater. Horiz., 2020,7, 592-597

Author version available

High-κ polymers of intrinsic microporosity: a new class of high temperature and low loss dielectrics for printed electronics

Z. Zhang, J. Zheng, K. Premasiri, M. Kwok, Q. Li, R. Li, S. Zhang, M. H. Litt, X. P. A. Gao and L. Zhu, Mater. Horiz., 2020, 7, 592 DOI: 10.1039/C9MH01261C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements