Issue 2, 2020

Asymmetric configuration of pseudocapacitive composite and rGO electrodes for enhanced capacitive deionization

Abstract

The common CDI cells employ a symmetric electrode pair configuration consisting of two identical carbon electrodes. Herein, we investigated the use of an electrode pair consisting of two different electrodes as an asymmetric configuration, such as a pseudocapacitive positive electrode paired with a carbon negative electrode. The pseudocapacitive spinel compounds of cubic MnFe2O4 and rod-like α-MnO2 nanocrystals were synthesized initially and then incorporated with GO nanosheets to obtain the MnFe2O4–rGO composite (30 wt% rGO) and MnO2–rGO composite (40 wt% rGO) via a hydrothermal process, respectively. It was found that the specific capacitance values at all scan rates were higher for the composite electrodes than for the individual metal oxide electrodes. This indicates that the rGO component provided additional surface area for the formation of an electrical double layer (EDL) and integrated well with the pseudocapacitive/Faradaic component to enhance the electrosorption performance. A CDI cell consisting of two distinct electrodes in an asymmetric configuration was fabricated, and it was found that MFO–rGO as the negative electrode and rGO as the positive electrode had the fastest average salt adsorption rate of 22.07 μg g−1 s−1 since the rGO negative electrode maintained the fast electrosorption and desorption rate via the electrical double layer mechanism. However the salt adsorption capacity of 29.44 mg g−1 was not as high as that of the pseudocapacitive composite/composite electrode pair. The electrode pair of two pseudocapacitive composites, i.e., MFO–rGO/MnO2–rGO had the highest salt adsorption capacity of 38.28 mg g−1, which is due to the synergistic pseudocapacitive/EDL effect for achieving high salt adsorption capacity, whereas it demonstrated the second fastest average salt adsorption rate of 20.8 μg g−1 s−1 due to the greater influence of diffusion charge transfer by the Faradaic mechanism. Finally, for the electrode pair of MnO2–rGO/rGO, both its salt adsorption capacity and rate of 21.16 mg g−1 and 14.39 μg g−1 s−1, respectively, were the lowest among the three pairs. The water productivity, and the energy consumption were calculated to evaluate the CDI performance, and the results were consistent with the trend of the average salt adsorption rates (ASAR). This study demonstrates that an electrode pair made of two different electrodes such as pseudocapacitive spinel composites and rGO is a promising arrangement to enhance the capacitive deionization process.

Graphical abstract: Asymmetric configuration of pseudocapacitive composite and rGO electrodes for enhanced capacitive deionization

Supplementary files

Article information

Article type
Paper
Submitted
20 11 2019
Accepted
18 12 2019
First published
24 12 2019

Environ. Sci.: Water Res. Technol., 2020,6, 392-403

Asymmetric configuration of pseudocapacitive composite and rGO electrodes for enhanced capacitive deionization

H. Younes and L. Zou, Environ. Sci.: Water Res. Technol., 2020, 6, 392 DOI: 10.1039/C9EW01033E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements