Issue 37, 2018

Fabrication of micron-sized BSA-imprinted polymers with outstanding adsorption capacity based on poly(glycidyl methacrylate)/polystyrene (PGMA/PS) anisotropic microspheres

Abstract

Monodisperse poly(glycidyl methacrylate)/polystyrene (PGMA/PS) anisotropic microspheres have been fabricated by seed polymerization. From the SEM images, it is known that the obtained PGMA/PS microspheres have three different morphologies: raspberry-shaped, golf-shaped and porous structures. Based on the successful fabrication of these micropheres, bovine serum albumin (BSA)-imprinted PGMA/PS microspheres were fabricated via dopamine auto-polymerization in alkaline solution. Because dopamine does not affect the validity of the protein structure, the imprinted cavity structure on the surface of the MIPs can match the template protein molecules completely. The obtained micron-sized BSA-imprinted PGMA/PS microspheres have an excellent saturation adsorption capacity (Q = 72.7 mg gāˆ’1) and good selective adsorption for BSA (IF = 4.6).

Graphical abstract: Fabrication of micron-sized BSA-imprinted polymers with outstanding adsorption capacity based on poly(glycidyl methacrylate)/polystyrene (PGMA/PS) anisotropic microspheres

Supplementary files

Article information

Article type
Paper
Submitted
31 5 2018
Accepted
21 8 2018
First published
23 8 2018

J. Mater. Chem. B, 2018,6, 5860-5866

Fabrication of micron-sized BSA-imprinted polymers with outstanding adsorption capacity based on poly(glycidyl methacrylate)/polystyrene (PGMA/PS) anisotropic microspheres

Y. Wang, J. Zhou, C. Wu, L. Tian, B. Zhang and Q. Zhang, J. Mater. Chem. B, 2018, 6, 5860 DOI: 10.1039/C8TB01423J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements