Issue 16, 2015

Methods to pattern liquid metals

Abstract

This highlight describes emerging methods to pattern metals that are liquid at room temperature. The ability to pattern liquid metals is important for fabricating metallic components that are soft, stretchable, conformal, and in some cases, shape-reconfigurable. Applications include electrodes, antennas, micro-mirrors, plasmonic structures, sensors, switches, and interconnects. Gallium (Ga) and its liquid metal alloys are attractive alternatives to toxic mercury. This family of alloys spontaneously forms a surface oxide that dominates the rheological and wetting properties of the metal. These properties pose challenges using conventional fabrication methods, but present new opportunities for patterning innovations. For example, Ga-based liquid metals may be injected, imprinted, or 3D printed on either soft or hard substrates. The use of a liquid metal also enables rapid and facile room temperature processing. The patterning techniques organize into four categories: (i) patterning enabled by lithography, (ii) injection, (iii) subtractive techniques, and (iv) additive techniques. Although many of these approaches take advantage of the surface oxide that forms on Ga and its alloys, some of the approaches may also be suitable for patterning other soft-conductors (e.g., conductive inks, pastes, elastomeric composites).

Graphical abstract: Methods to pattern liquid metals

Supplementary files

Article information

Article type
Highlight
Submitted
02 2 2015
Accepted
13 3 2015
First published
31 3 2015

J. Mater. Chem. C, 2015,3, 3834-3841

Methods to pattern liquid metals

I. D. Joshipura, H. R. Ayers, C. Majidi and M. D. Dickey, J. Mater. Chem. C, 2015, 3, 3834 DOI: 10.1039/C5TC00330J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements