Issue 48, 2023

Copper hydroxide/basic copper salt derived Cu0 with a clear grain boundary for selective electrocatalytic CO2 reduction to produce multicarbon products

Abstract

Electrocatalytic CO2 reduction (ECR) is one of the most promising ways to mitigate CO2 and fuel production, and multicarbon products (C2+) with high chemical value attract lots of interest. Cu is a unique electrocatalyst that can convert CO2 to multicarbon products, but with limited selectivity and activity. Here, aiming for a clear Cu0 nanoparticle structure with a clear grain boundary, we report a simple and effective method of Cu(OH)2/basic copper sulphate compound material synthesis, which is in situ reduced to Cu0 nanoparticles with a clear grain boundary (GB) during the ECR process. The Cu(OH)2/basic copper sulphate-derived Cu nanoparticles show a high C2+ faradaic efficiency (FE) of 81% at −1.2 V vs. RHE, which surpasses that of state-of-the-art Cu-based catalysts evaluated in an H-type cell. Extending the method to other basic copper salts (BCS), we successfully synthesized three other Cu(OH)2/BCS species (nitrate, carbonate and chloride), which were also converted to Cu0 with a clear grain boundary during ECR. DFT calculation results reveal that the GB sites could effectively decrease the energy barrier of the reactant CO2 adsorption and critical C–C coupling steps, which endows the derived Cu electrocatalyst with high selectivity for C2H4 and C2+ products.

Graphical abstract: Copper hydroxide/basic copper salt derived Cu0 with a clear grain boundary for selective electrocatalytic CO2 reduction to produce multicarbon products

Supplementary files

Article information

Article type
Paper
Submitted
17 set 2023
Accepted
16 nov 2023
First published
16 nov 2023

J. Mater. Chem. A, 2023,11, 26481-26487

Copper hydroxide/basic copper salt derived Cu0 with a clear grain boundary for selective electrocatalytic CO2 reduction to produce multicarbon products

S. Song, H. Wu, B. Tian, Y. Zhang, Y. Kuang and X. Sun, J. Mater. Chem. A, 2023, 11, 26481 DOI: 10.1039/D3TA05628G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements