Issue 2, 2020

MXene interlayered crosslinked conducting polymer film for highly specific absorption and electromagnetic interference shielding

Abstract

In this work, the electromagnetic interference (EMI) shielding properties of an MXene interlayered crosslinked conducting poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) polymer film are investigated. The introduction of a crosslinker into PEDOT:PSS makes PEDOT:PSS water insoluble. An average EMI shielding effectiveness (SE) of ∼41 dB (corresponding to 99.999% blockage) was obtained for a solution coated 6 ± 0.2 μm thick optimized crosslinked PEDOT:PSS-Ti3C2Tx MXene (XPM50) nanocomposite film. Electrodynamic modelling and simulation also suggest an excellent SE for this nanocomposite system. From an application point of view, the specific EMI SE (SSE)/thickness (t) or absolute EMI SE is the most useful factor. The absolute EMI SE of the XPM50 film is observed to be 89 924 dB cm2 g−1, which is nearly nine times higher than that of the pristine PEDOT:PSS film and more than three times higher than that of the Ti3C2Tx MXene film. Mechanistically, the superior EMI shielding due to absorption (SEA) is intrinsically predominant. The crosslinked PEDOT:PSS interconnects with the Ti3C2Tx MXene flakes, generating more absorption sites and enhanced electrical conductivity which is responsible for the high SEA value. The XPM50 film also fulfils many commercial requirements, especially solution processability and outstanding absolute EMI SE, which makes it an attractive EMI shield for real time applications such as telecommunications, health care systems, detective systems, defence, and aerospace applications.

Graphical abstract: MXene interlayered crosslinked conducting polymer film for highly specific absorption and electromagnetic interference shielding

Supplementary files

Article information

Article type
Paper
Submitted
06 feb 2020
Accepted
12 apr 2020
First published
22 apr 2020
This article is Open Access
Creative Commons BY license

Mater. Adv., 2020,1, 177-183

MXene interlayered crosslinked conducting polymer film for highly specific absorption and electromagnetic interference shielding

P. J. Bora, A. G. Anil, P. C. Ramamurthy and D. Q. Tan, Mater. Adv., 2020, 1, 177 DOI: 10.1039/D0MA00005A

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements