Exploiting the network architecture of thiol–ene photo-crosslinked poly(ε-caprolactone) towards tailorable materials for light-based 3D-printing

Astrid Quaak, Quinten Thijssen and Sandra Van Vlierberghe

Polym. Chem., 2023, 14, 3392
DOI: 10.1039/D3PY00381G

Polyester networks from structurally similar monomers: recyclable-by-design and upcyclable to photopolymers

Grant M. Musgrave, Katie M. Bishop, John S. Kim, Amelia C. Heiner and Chen Wang

Polym. Chem., 2023, 14, 2964
DOI: 10.1039/D3PY00338H

Harnessing ene-type and stereochemistry to control reaction kinetics and network architecture in thiol–ene photopolymerizations using maleate and fumarate-derived monomers

Rithwik Ghanta, Ayaulym Abilova, Cade McAndrew and Alexa S. Kuenstler

Polym. Chem., 2025, 16, 1829
DOI: 10.1039/D4PY01361A

Using viscoplastic fluid to suppress part sedimentation in volumetric additive manufacturing

Roozbeh Salajeghe, Berin Šeta, Deepak Marla and Jon Spangenberg

Prog Addit Manuf, 2025, 10, 2411
DOI: 10.1007/s40964-024-00758-y

Additive manufacturing: Frameworks for chemical understanding and advancement in vat photopolymerization

Johanna J. Schwartz

MRS Bulletin, 2022, 47, 628
DOI: 10.1557/s43577-022-00343-0

Preparation and Characterization of Body-Temperature-Responsive Thermoset Shape Memory Polyurethane for Medical Applications

Xiaoqing Yang, Zhipeng Han, Chengqi Jia, Tianjiao Wang, Xiaomeng Wang, Fanqi Hu, Hui Zhang, Jun Zhao and Xuesong Zhang

Polymers, 2023, 15, 3193
DOI: 10.3390/polym15153193

Investigating thermal strains and chemical shrinkage in tomographic volumetric additive manufacturing

Nicole Pellizzon, Berin Šeta, Carl Sander Kruse, Roozbeh Salajeghe and Jon Spangenberg

Additive Manufacturing, 2025, 105, 104781
DOI: 10.1016/j.addma.2025.104781

Thiol‐X Chemistry: A Skeleton Key Unlocking Advanced Polymers in Additive Manufacturing

James Anthony Dicks and Chris Woolard

Macro Materials & Eng, 2025, 310
DOI: 10.1002/mame.202400445

Volumetric 3D Printing of Endoskeletal Soft Robots

Cameron Darkes‐Burkey and Robert F. Shepherd

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202402217

Volumetric additive manufacturing: A new frontier in layer-less 3D printing

Daniel J. Whyte, Egan H. Doeven, Alessandra Sutti, Abbas Z. Kouzani and Scott D. Adams

Additive Manufacturing, 2024, 84, 104094
DOI: 10.1016/j.addma.2024.104094

Light from Afield: Fast, High-Resolution, and Layer-Free Deep Vat 3D Printing

Parth Chansoria, Riccardo Rizzo, Dominic Rütsche, Hao Liu, Paul Delrot and Marcy Zenobi-Wong

Chem. Rev., 2024, 124, 8787
DOI: 10.1021/acs.chemrev.4c00134

Multifunctional properties optimization and stimuli‐responsivity of shape memory polymeric nanoarchitectures and applications

Christopher Igwe Idumah

Polymer Engineering & Sci, 2023, 63, 1857
DOI: 10.1002/pen.26331

Holographic tomographic volumetric additive manufacturing

Maria Isabel Álvarez-Castaño, Andreas Gejl Madsen, Jorge Madrid-Wolff, Viola Sgarminato, Antoine Boniface, Jesper Glückstad and Christophe Moser

Nat Commun, 2025, 16
DOI: 10.1038/s41467-025-56852-4

Tomographic projection optimization for volumetric additive manufacturing with general band constraint Lp-norm minimization

Chi Chung Li, Joseph Toombs, Hayden K. Taylor and Thomas J. Wallin

Additive Manufacturing, 2024, 94, 104447
DOI: 10.1016/j.addma.2024.104447

Impact of oxygen inhibition on (meth)acrylate photopolymerization in tomographic volumetric printing

Yujie Zhang, Hendrick de Haan, Katherine Houlahan, Kathleen L. Sampson, Daniel Webber, Antony Orth, Thomas Lacelle, Liliana Gaburici, Rene Lam, Bhavana Deore and Chantal Paquet

Additive Manufacturing, 2025, 109, 104844
DOI: 10.1016/j.addma.2025.104844

Sustainable 4D Printable Biobased Shape Memory Polymers with Linear Tunability and Multistimuli Actuation for Advanced Applications

Maksims Jurinovs, Madara Veseta, Alisa Sabalina, Pedro E. S. Silva, Artis Linarts, Hossein Baniasadi, Jaana Vapaavuori and Sergejs Gaidukovs

Small Science, 2025, 5
DOI: 10.1002/smsc.202500104

A Thermally Expandable Resin for the Volumetric Additive Manufacturing of Shape‐Memory Functional Foams

Silvio Tisato, Grace Vera, Zahra Hosneolfat and Dorothea Helmer

Adv Materials Technologies, 2025
DOI: 10.1002/admt.202501355

Virtual Volumetric Additive Manufacturing (VirtualVAM)

Todd H. Weisgraber, Martin P. de Beer, Sijia Huang, John J. Karnes, Caitlyn C. Cook and Maxim Shusteff

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202301054

Anisotropic stimuli-responsive polymeric materials: chemistry and applications

Yuan Zhang, Zhimin Lu, Changming Wu and Yang Xu

Front. Mater., 2025, 12
DOI: 10.3389/fmats.2025.1533330

Development of a low‐cost volumetric additive manufacturing printer using less viscous commercial resins

Ribin Varghese Pazhamannil, Haitham M. Hadidi and Govindan Puthumana

Polymer Engineering & Sci, 2023, 63, 65
DOI: 10.1002/pen.26186

Occlusion-based model weighting for volumetric additive manufacturing around inserts

Ahmad Bagheri, Mohammad Reza Zakerzadeh and Mohammad Jafar Sadigh

Virtual and Physical Prototyping, 2024, 19
DOI: 10.1080/17452759.2024.2407473

A review of materials used in tomographic volumetric additive manufacturing

Jorge Madrid-Wolff, Joseph Toombs, Riccardo Rizzo, Paulina Nuñez Bernal, Dominique Porcincula, Rebecca Walton, Bin Wang, Frederik Kotz-Helmer, Yi Yang, David Kaplan, Yu Shrike Zhang, Marcy Zenobi-Wong, Robert R. McLeod, Bastian Rapp, Johanna Schwartz, Maxim Shusteff, Hayden Talyor, Riccardo Levato and Christophe Moser

MRS Communications, 2023, 13, 764
DOI: 10.1557/s43579-023-00447-x

Volumetric 3D printing of ionic conductive elastomers for multifunctional flexible electronics

Shuai Peng, Geming Chen, Xuan Luo, Xinghao Zhang, Dongya Li, Yibo Xu, Chonghao Sun, Erwei Shang, Xiaolong Wang and Yu Liu

Additive Manufacturing, 2024, 95, 104536
DOI: 10.1016/j.addma.2024.104536

Numerical modeling of tomographic volumetric additive manufacturing based on energy threshold method

Roozbeh Salajeghe, Berin Šeta, Nicole Pellizzon, Carl Gustav Sander Kruse, Deepak Marla, Aminul Islam and Jon Spangenberg

Additive Manufacturing, 2024, 96, 104552
DOI: 10.1016/j.addma.2024.104552

Shape Memory Polymeric Materials for Biomedical Applications: An Update

Dinesh Rokaya, Hans Erling Skallevold, Viritpon Srimaneepong, Anand Marya, Pravin Kumar Shah, Zohaib Khurshid, Muhammad Sohail Zafar and Janak Sapkota

J. Compos. Sci., 2023, 7, 24
DOI: 10.3390/jcs7010024

From pixels to voxels: A mechanistic perspective on volumetric 3D-printing

Quinten Thijssen, Joseph Toombs, Chi Chung Li, Hayden Taylor and Sandra Van Vlierberghe

Progress in Polymer Science, 2023, 147, 101755
DOI: 10.1016/j.progpolymsci.2023.101755

Sparse-view irradiation processing volumetric additive manufacturing

Huiyuan Wang, Fangyuan Gao, Yu Shi, Kai Wang, Xinbo Wei, Chunyang Ma, Xiewen Wen, Xueli Chen and Jiebo Li

Int. J. Extrem. Manuf., 2025, 7, 065001
DOI: 10.1088/2631-7990/adebbf

A Versatile and High‐Resolution Hydrogel Platform for Volumetric Additive Manufacturing Based on Poly(ethylene glycol) Diacrylate and Alginate Blends

Patrick C. Hall, DeShea Chasko, Tim Wheeler, Diana Ostojich, Judah Aptecker, Ievgenii Liashenko, Robert Luxenhofer, Gabriella C.J. Lindberg and Paul D. Dalton

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401668

An overview on ceramic multi-material additive manufacturing: progress and challenges

Yifei Li, Annan Chen, Jin Su, Yinjin Li, Yue Zhang, Zhaoqing Li, Shixiang Zhou, Jinhan He, Zhaowenbo Cao, Yusheng Shi, Jian Lu and Chunze Yan

Int. J. Extrem. Manuf., 2025, 7, 042005
DOI: 10.1088/2631-7990/adbc75

Development of transparent, particle‐loaded photoresins for volumetric additive manufacturing of silica glass

Luke A. Myers, Johanna J. Schwartz, Martin P. De Beer, Rebecca L. Walton and Dominique H. Porcincula

Journal of Polymer Science, 2024, 62, 2683
DOI: 10.1002/pol.20230654