Cross Reference Logo
Citations to this article as recorded by CrossRef and RSC Journals (323 citations).

3D printing of functional microrobots
Jinhua Li and Martin Pumera
Chem. Soc. Rev., 2021, 50, 2794
DOI: 10.1039/D0CS01062F

Solventless, rapid-polymerizable liquid resins from solid carboxylic acids through low-viscosity acid/base complexes
Grant M. Musgrave, Eden Y. Yau, Sijia Huang, Caleb J. Reese and Chen Wang
J. Mater. Chem. A, 2025, 13, 190
DOI: 10.1039/D4TA05417B

Indole-based charge transfer complexes as versatile dual thermal and photochemical polymerization initiators for 3D printing and composites
Dengxia Wang, Patxi Garra, Jean Pierre Fouassier, Bernadette Graff, Yusuf Yagci and Jacques Lalevée
Polym. Chem., 2019, 10, 4991
DOI: 10.1039/C9PY00878K

Polyester networks from structurally similar monomers: recyclable-by-design and upcyclable to photopolymers
Grant M. Musgrave, Katie M. Bishop, John S. Kim, Amelia C. Heiner and Chen Wang
Polym. Chem., 2023, 14, 2964
DOI: 10.1039/D3PY00338H

One-component cationic photoinitiators based on coumarin scaffold iodonium salts as highly sensitive photoacid generators for 3D printing IPN photopolymers under visible LED sources
Monika Topa, Emilia Hola, Mariusz Galek, Filip Petko, Maciej Pilch, Roman Popielarz, Fabrice Morlet-Savary, Bernadette Graff, Jacques Lalevée and Joanna Ortyl
Polym. Chem., 2020, 11, 5261
DOI: 10.1039/D0PY00677G

New, highly versatile bimolecular photoinitiating systems for free-radical, cationic and thiol–ene photopolymerization processes under low light intensity UV and visible LEDs for 3D printing application
Emilia Hola, Monika Topa, Anna Chachaj-Brekiesz, Maciej Pilch, Paweł Fiedor, Mariusz Galek and Joanna Ortyl
RSC Adv., 2020, 10, 7509
DOI: 10.1039/C9RA10212D

Tailoring a hybrid three-component photoinitiating system for 3D printing
C. Ley, A. IShak, B. Metral, J. Brendlé and X. Allonas
Phys. Chem. Chem. Phys., 2020, 22, 20507
DOI: 10.1039/D0CP03153D

Polymers and light: a love–hate relationship
M. A. Sachini N. Weerasinghe, Tochukwu Nwoko and Dominik Konkolewicz
Chem. Sci., 2025, 16, 5326
DOI: 10.1039/D5SC00997A

The molecular design of photo-curable and high-strength benzoxazine for 3D printing
Yong Lu, Kok Wei Joseph Ng, Hui Chen, Xuelong Chen, Song Kiat Jacob Lim, Weili Yan and Xiao Hu
Chem. Commun., 2021, 57, 3375
DOI: 10.1039/D0CC07801H

D–A dyads and A–D–A triads based on ferrocene: push–pull dyes with unusual behaviours in solution
Guillaume Noirbent, Damien Brunel, Thanh-Tuân Bui, Sébastien Péralta, Pierre-Henri Aubert, Didier Gigmes and Frédéric Dumur
New J. Chem., 2021, 45, 13475
DOI: 10.1039/D1NJ01680F

Thiol ligand capped quantum dot as an efficient and oxygen tolerance photoinitiator for aqueous phase radical polymerization and 3D printing under visible light
Yifan Zhu, Emira Ramadani and Eilaf Egap
Polym. Chem., 2021, 12, 5106
DOI: 10.1039/D1PY00705J

Colorimetric 3D printable base-detectors exploiting halocromic core-substituted naphthalenediimides
Beatrice Tosetto, Matteo Gastaldi, Giacomo Renno, Candido Fabrizio Pirri, Claudia Barolo, Andrea Fin and Ignazio Roppolo
Polym. Chem., 2023, 14, 1213
DOI: 10.1039/D2PY01593E

Silane/iodonium salt as redox/thermal/photoinitiating systems in radical and cationic polymerizations for laser write and composites
Dengxia Wang, Patxi Garra, Jean Pierre Fouassier and Jacques Lalevée
Polym. Chem., 2020, 11, 857
DOI: 10.1039/C9PY01819K

3D printing of polymeric materials based on photo-RAFT polymerization
Ali Bagheri, Kyle Edward Engel, Chris William Anderson Bainbridge, Jiangtao Xu, Cyrille Boyer and Jianyong Jin
Polym. Chem., 2020, 11, 641
DOI: 10.1039/C9PY01419E

3D printed objects obtained by combination of radical photopolymerization and photo sol–gel reaction: towards reinforced thermomechanical properties
Lucile Halbardier, Céline Croutxé-Barghorn, Emile Goldbach, Anne-Sophie Schuller and Xavier Allonas
Polym. Chem., 2023, 14, 4048
DOI: 10.1039/D3PY00650F

Imidazole based dual photo/thermal initiators for highly efficient radical polymerization under air with a metal-free approach
Qiang Ma, Shaohui Liu, Marie Le Dot, Haifaa Mokbel, Yijun Zhang, Bernadette Graff and Jacques Lalevée
Polym. Chem., 2021, 12, 6386
DOI: 10.1039/D1PY01079D

In silico rational design by molecular modeling of new ketones as photoinitiators in three-component photoinitiating systems: application in 3D printing
Ke Sun, Yangyang Xu, Frédéric Dumur, Fabrice Morlet-Savary, Hong Chen, Céline Dietlin, Bernadette Graff, Jacques Lalevée and Pu Xiao
Polym. Chem., 2020, 11, 2230
DOI: 10.1039/C9PY01874C

Photo-crosslinking polymers by dynamic covalent disulfide bonds
Bianka Sieredzinska, Qi Zhang, Keimpe J. van den Berg, Jitte Flapper and Ben L. Feringa
Chem. Commun., 2021, 57, 9838
DOI: 10.1039/D1CC03648C

Multi-photon polymerization of bio-inspired, thymol-functionalized hybrid materials with biocompatible and antimicrobial activity
Kostas Parkatzidis, Maria Chatzinikolaidou, Eleftherios Koufakis, Maria Kaliva, Maria Farsari and Maria Vamvakaki
Polym. Chem., 2020, 11, 4078
DOI: 10.1039/D0PY00281J

Impact of PEGDA photopolymerization in micro-stereolithography on 3D printed hydrogel structure and swelling
Afra S. Alketbi, Yunfeng Shi, Hongxia Li, Aikifa Raza and TieJun Zhang
Soft Matter, 2021, 17, 7188
DOI: 10.1039/D1SM00483B

Photoinitiator-catalyst systems based onmeta-terphenyl derivatives as photosensitisers of iodonium and thianthrenium salts for visible photopolymerization in 3D printing processes
Wiktoria Tomal, Maciej Pilch, Anna Chachaj-Brekiesz, Mariusz Galek, Fabrice Morlet-Savary, Bernadette Graff, Céline Dietlin, Jacques Lalevée and Joanna Ortyl
Polym. Chem., 2020, 11, 4604
DOI: 10.1039/D0PY00597E

Synthesis and characterization of tung oil-based UV curable for three-dimensional printing resins
Zicheng Zhao, Hong Wu, Xudong Liu, Desheng Kang, Zhihong Xiao, Qiquan Lin and Aihua Zhang
RSC Adv., 2022, 12, 22119
DOI: 10.1039/D2RA03182E

Controlled orthogonal reactions in neat polymerizations
Caleb J. Reese, Grant M. Musgrave and Chen Wang
Polym. Chem., 2024, 15, 3954
DOI: 10.1039/D4PY00666F

Photocurable modification of inorganic fillers and their application in photopolymers for 3D printing
Yang Liu, Yucong Lin, Ting Jiao, Gang Lu and Jie Liu
Polym. Chem., 2019, 10, 6350
DOI: 10.1039/C9PY01445D

N-Aryl glycines as versatile initiators for various polymerizations
H. Lai, D. Zhu, X. Peng, J. Zhang, J. Lalevée and P. Xiao
Polym. Chem., 2021, 12, 1991
DOI: 10.1039/D1PY00030F

3D printed elastomers with Sylgard-184-like mechanical properties and tuneable degradability
Nevena Paunović, Jean-Christophe Leroux and Yinyin Bao
Polym. Chem., 2022, 13, 2271
DOI: 10.1039/D2PY00113F

Recent innovations in interfacial strategies for DLP 3D printing process optimization
Lei Wu and Yanlin Song
Mater. Horiz., 2025, 12, 401
DOI: 10.1039/D4MH01160K

Thiol–yne chemistry for 3D printing: exploiting an off-stoichiometric route for selective functionalization of 3D objects
Ignazio Roppolo, Francesca Frascella, Matteo Gastaldi, Micaela Castellino, Betty Ciubini, Claudia Barolo, Luciano Scaltrito, Carmelo Nicosia, Marco Zanetti and Annalisa Chiappone
Polym. Chem., 2019, 10, 5950
DOI: 10.1039/C9PY00962K

Direct ink writing of recyclable and in situ repairable photothermal polyurethane for sustainable 3D printing development
Mingyue Zheng, Qiuquan Guo, Xiangyu Yin, Nuwansiri Nirosh Getangama, John R. de Bruyn, Junfeng Xiao, Yang Bai, Mei Liu and Jun Yang
J. Mater. Chem. A, 2021, 9, 6981
DOI: 10.1039/D0TA11341G

1,3-Diether-2-methacrylates with glycerol skeletons: tunable resins for stereolithography 3D printing
Zahra Sekhavat Pour, Pravin S. Shinde, Jun Wang, Cameron Woods, Seth Taylor, Sourav Chatterjee and Jason E. Bara
Polym. Chem., 2025, 16, 2840
DOI: 10.1039/D5PY00198F

The NIR-sensitized cationic photopolymerization of oxetanes in combination with epoxide and acrylate monomers
Yulian Pang, Hongjun Jiao, Yingquan Zou and Bernd Strehmel
Polym. Chem., 2021, 12, 5752
DOI: 10.1039/D1PY00999K

Polymer networks based on photo-caged diene dimerization
Tim Krappitz, Florian Feist, Iris Lamparth, Norbert Moszner, Hendrik John, James P. Blinco, Tim R. Dargaville and Christopher Barner-Kowollik
Mater. Horiz., 2019, 6, 81
DOI: 10.1039/C8MH00951A

Recent advances in light-regulated non-radical polymerisations
Haiwang Lai, Jing Zhang, Feiyue Xing and Pu Xiao
Chem. Soc. Rev., 2020, 49, 1867
DOI: 10.1039/C9CS00731H

Multifunctional biphenyl derivatives as photosensitisers in various types of photopolymerization processes, including IPN formation, 3D printing of photocurable multiwalled carbon nanotubes (MWCNTs) fluorescent composites
Wiktoria Tomal, Anna Chachaj-Brekiesz, Roman Popielarz and Joanna Ortyl
RSC Adv., 2020, 10, 32162
DOI: 10.1039/D0RA04146G

New versatile bimolecular photoinitiating systems based on amino-m-terphenyl derivatives for cationic, free-radical and thiol–ene photopolymerization under low intensity UV-A and visible light sources
Emilia Hola, Maciej Pilch, Mariusz Galek and Joanna Ortyl
Polym. Chem., 2020, 11, 480
DOI: 10.1039/C9PY01091B

Azacalixphyrins as an innovative alternative for the free-radical photopolymerization under visible and NIR irradiation without the need of co-initiators
Louise Breloy, Rana Mhanna, Jean-Pierre Malval, Vlasta Brezová, Denis Jacquemin, Simon Pascal, Olivier Siri and Davy-Louis Versace
Chem. Commun., 2021, 57, 8973
DOI: 10.1039/D1CC03607F

Wavelength-resolved near infra-red light induced free-radical polymerization
Philipp Neidinger, Joshua Davis, Joshua A. Carroll, Jochen Kammerer, Esa Jaatinen, Sarah L. Walden, Andreas-Neil Unterreiner and Christopher Barner-Kowollik
Polym. Chem., 2023, 14, 4912
DOI: 10.1039/D3PY01097J

New horizons for carbon dots: quantum nano-photoinitiating catalysts for cationic photopolymerization and three-dimensional (3D) printing under visible light
Wiktoria Tomal, Tomasz Świergosz, Maciej Pilch, Wiktor Kasprzyk and Joanna Ortyl
Polym. Chem., 2021, 12, 3661
DOI: 10.1039/D1PY00228G

Stereolithographic 3D printing of pure poly(ether–ester) networks from spirocyclic monomers via cationic ring-opening photopolymerization at high temperatures
Danijela Kojic, Katharina Ehrmann, Raffael Wolff, Yazgan Mete, Thomas Koch, Jürgen Stampfl, Stefan Baudis and Robert Liska
Polym. Chem., 2023, 14, 4809
DOI: 10.1039/D3PY00787A

Sulfonium salt based charge transfer complexes as dual thermal and photochemical polymerization initiators for composites and 3D printing
Dengxia Wang, Kerem Kaya, Patxi Garra, Jean-Pierre Fouassier, Bernadette Graff, Yusuf Yagci and Jacques Lalevée
Polym. Chem., 2019, 10, 4690
DOI: 10.1039/C9PY00913B

Bicarbazole-based oxime esters as novel efficient photoinitiators for photopolymerization under UV-Vis LEDs
Ruchun Zhou, Haiyan Pan, Decheng Wan, Jean-Pierre Malval and Ming Jin
Progress in Organic Coatings, 2021, 157, 106306
DOI: 10.1016/j.porgcoat.2021.106306

Synthesis and characterization of stereolithography 3D printing fluorescent resin
Min Liu, Jin Chen, Lu Zheng, Yuyu Gao and Yingying Liu
Polymer Engineering & Sci, 2023, 63, 1961
DOI: 10.1002/pen.26338

3D Printing based on Photopolymerization and Photocatalysts: Review and Prospect
Jia Li, Cyrille Boyer and Xuewen Zhang
Macro Materials & Eng, 2022, 307
DOI: 10.1002/mame.202200010

MODANIN TEKNOLOJİK DÖNÜŞÜMÜ: 3 BOYUTLU YAZICI TASARIMLARI
Emine Erdoğan
Karadeniz Uluslararası Bilimsel Dergi, 2022, 1, 169
DOI: 10.17498/kdeniz.1206639

Photocurable elastomers with tunable mechanical properties for 3D digital light processing printing
Kannaporn Pooput, Somruethai Channasanon, Passakorn Tesavibul, Pitchapa Pittayavinai and Wirun Taweelue
J Polym Res, 2020, 27
DOI: 10.1007/s10965-020-02289-w

Recent advances on pyrene-based photoinitiators of polymerization
Frédéric Dumur
European Polymer Journal, 2020, 126, 109564
DOI: 10.1016/j.eurpolymj.2020.109564

Additive manufacturing materials, methods and applications: A review
Akash Bhatia and Anuj Kumar Sehgal
Materials Today: Proceedings, 2023, 81, 1060
DOI: 10.1016/j.matpr.2021.04.379

Progress and opportunities in additive manufacturing of electrically conductive polymer composites
Yinjia Yan, Yixue Jiang, Evelyn Ling Ling Ng, Yanni Zhang, Cally Owh, Fuke Wang, Qing Song, Tao Feng, Biao Zhang, Peng Li, Xian Jun Loh, Siew Yin Chan and Benjamin Qi Yu Chan
Materials Today Advances, 2023, 17, 100333
DOI: 10.1016/j.mtadv.2022.100333

Benzophenone derivatives as novel organosoluble visible light Type II photoinitiators for UV and LED photoinitiating systems
Tung‐Liang Huang, Yan‐Heng Li and Yung‐Chung Chen
Journal of Polymer Science, 2020, 58, 2914
DOI: 10.1002/pol.20200437

Designing with Light: Advanced 2D, 3D, and 4D Materials
Kenward Jung, Nathaniel Corrigan, Mustafa Ciftci, Jiangtao Xu, Soyoung E. Seo, Craig J. Hawker and Cyrille Boyer
Advanced Materials, 2020, 32
DOI: 10.1002/adma.201903850

Hybrid diacrylate resin-gelatin methacryloyl composite with bone-to-brain stiffness range
Mohammad Naghavi Zadeh, Kapil D. Patel, Daniel Gosden, James A. Smith, Paul J. Gates, Qiukai Qi, Fabrizio Scarpa, Andrew Conn, Adam W. Perriman and Jonathan Rossiter
Commun Mater, 2025, 6
DOI: 10.1038/s43246-025-00931-y

Recent Advances in bis-Chalcone-Based Photoinitiators of Polymerization: From Mechanistic Investigations to Applications
Nicolas Giacoletto and Frédéric Dumur
Molecules, 2021, 26, 3192
DOI: 10.3390/molecules26113192

Construction of fluorinated hyperbranched polyaryletherketone-based UV-cured films with low dielectric and enhanced mechanical properties
Lingmei Jiang, Haoran Liu, Kuanyu Yuan, Guangsheng Zhang, Changhong Xiao, Chenghao Wang, Lishuai Zong, Jinyan Wang and Xigao Jian
Polymer, 2024, 299, 126902
DOI: 10.1016/j.polymer.2024.126902

Synthesis and free radical photopolymerization of one-component type II photoinitiator based on benzophenone segment
Tung-Liang Huang and Yung-Chung Chen
Journal of Photochemistry and Photobiology A: Chemistry, 2022, 429, 113900
DOI: 10.1016/j.jphotochem.2022.113900

Quantitative Determination of 3D-Printing and Surface-Treatment Conditions for Direct-Printed Microfluidic Devices
Hyun Namgung, Abdi Mirgissa Kaba, Hyeonkyu Oh, Hyunjin Jeon, Jeonghwan Yoon, Haseul Lee and Dohyun Kim
BioChip J, 2022, 16, 82
DOI: 10.1007/s13206-022-00048-1

Superaerophobic polymer objects prototyped via liquid crystal display (LCD)-based 3D printing: one-step post-surface-treatment and application in underwater bubble manipulation
Meichen Liu, Yaping Sun, Mengzhen Zhou, Peng Wang, Xiaoyan Ma, Weiye Xu, Teng Zhang, Yanzhi Xia and Zhong Xiong
Virtual and Physical Prototyping, 2024, 19
DOI: 10.1080/17452759.2024.2359005

Thioxanthone-Based Photobase Generators for the Synthesis of Polyurethanes via the Photopolymerization of Polyols and Polyisocyanates
Nicolas Zivic, Naroa Sadaba, Nora Almandoz, Fernando Ruipérez, David Mecerreyes and Haritz Sardon
Macromolecules, 2020, 53, 2069
DOI: 10.1021/acs.macromol.9b02648

Accelerated discovery of 3D printing materials using data-driven multiobjective optimization
Timothy Erps, Michael Foshey, Mina Konaković Luković, Wan Shou, Hanns Hagen Goetzke, Herve Dietsch, Klaus Stoll, Bernhard von Vacano and Wojciech Matusik
Sci. Adv., 2021, 7
DOI: 10.1126/sciadv.abf7435

3D Printed Electrode Structures and Materials for Rechargeable Batteries
Xiaoyi Liu, Jian Wang, Bintao Wu, Haibo Li, Pin Ma and Hui Ying Yang
Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202500946

Digital Light Processing 3D Printing of Gyroid Scaffold with Isosorbide-Based Photopolymer for Bone Tissue Engineering
Fiona Verisqa, Jae-Ryung Cha, Linh Nguyen, Hae-Won Kim and Jonathan C. Knowles
Biomolecules, 2022, 12, 1692
DOI: 10.3390/biom12111692

Urinary bladder and urethral tissue engineering, and 3D bioprinting approaches for urological reconstruction
Sulob Roy Chowdhury, Nandita Keshavan and Bikramjit Basu
Journal of Materials Research, 2021, 36, 3781
DOI: 10.1557/s43578-021-00255-w

Recyclable photoresins for light-mediated additive manufacturing towards Loop 3D printing
Xabier Lopez de Pariza, Oihane Varela, Samantha O. Catt, Timothy E. Long, Eva Blasco and Haritz Sardon
Nat Commun, 2023, 14
DOI: 10.1038/s41467-023-41267-w

“Invisible” Digital Light Processing 3D Printing with Near Infrared Light
Lynn M. Stevens, Clotilde Tagnon and Zachariah A. Page
ACS Appl. Mater. Interfaces, 2022, 14, 22912
DOI: 10.1021/acsami.1c22046

Achievement of high-reliability and high-efficient deposit of PA66 by additive friction stir deposition
Hua Liu, Mengjia Xu and Xiaopeng Li
Composites Part B: Engineering, 2024, 284, 111682
DOI: 10.1016/j.compositesb.2024.111682

Work‐hardening Photopolymer from Renewable Photoactive 3,3’‐(2,5‐Furandiyl)bisacrylic Acid
Yann Lie, Alessandro Pellis, Ignacio Funes‐Ardoiz, Diego Sampedro, Duncan J. Macquarrie and Thomas J. Farmer
ChemSusChem, 2020, 13, 4140
DOI: 10.1002/cssc.202000842

3D/4D Printing of Polyurethanes by Vat Photopolymerization
Jessica Mauriello, Romain Maury, Yohann Guillaneuf and Didier Gigmes
Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300366

3D Printing of a Dual-Curing Resin with Cationic Curable Vegetable Oil
Yanyan Cui, Junlai Yang, Dehua Lei and Jiahui Su
Ind. Eng. Chem. Res., 2020, 59, 11381
DOI: 10.1021/acs.iecr.0c01507

Tough PEG‐only hydrogels with complex 3D structure enabled by digital light processing of “all‐PEG” resins
Safira Noor Anindita, Riccardo Conti, Doris Zauchner, Nevena Paunović, Wanwan Qiu, Marina Green Buzhor, Adva Krivitsky, Zhi Luo, Ralph Müller, Hansjörg Grützmacher, Xiao‐Hua Qin, Jean‐Christophe Leroux and Yinyin Bao
Aggregate, 2023, 4
DOI: 10.1002/agt2.368

Mussel-Inspired Coatings by Photoinduced Electron-Transfer Reactions: Photopolymerization of Dopamine under UV, Visible, and Daylight under Oxygen-Free Conditions
Kerem Kaya, Steffen Jockusch and Yusuf Yagci
Macromolecules, 2021, 54, 5991
DOI: 10.1021/acs.macromol.1c00946

Piezoelectric microphone via a digital light processing 3D printing process
Benjamin Tiller, Andrew Reid, Botong Zhu, José Guerreiro, Roger Domingo-Roca, Joseph Curt Jackson and J.F.C. Windmill
Materials & Design, 2019, 165, 107593
DOI: 10.1016/j.matdes.2019.107593

Polymethylferrocene-Induced Photopolymerization of Cyanoacrylates Using Visible and Near-Infrared Light
Enrico Faggi, Carolina Gascó, Jordi Aguilera, Gonzalo Guirado, Sara Ortego, Rubén Sáez, Ferran Pujol, Jordi Marquet, Jordi Hernando and Rosa María Sebastián
Macromolecules, 2019, 52, 5602
DOI: 10.1021/acs.macromol.9b00745

Application of RAFT in 3D Printing: Where Are the Future Opportunities?
Ali Bagheri
Macromolecules, 2023, 56, 1778
DOI: 10.1021/acs.macromol.2c02585

Cutting-edge progress and challenges in stimuli responsive hydrogel microenvironment for success in tissue engineering today
Parinaz Abdollahiyan, Behzad Baradaran, Miguel de la Guardia, Fatemeh Oroojalian and Ahad Mokhtarzadeh
Journal of Controlled Release, 2020, 328, 514
DOI: 10.1016/j.jconrel.2020.09.030

Tuning the Mechanical Properties of 3D‐printed Objects by the RAFT Process: From Chain‐Growth to Step‐Growth
Xiaofeng Pan, Jiajia Li, Zhuang Li, Qing Li, Xiangqiang Pan, Zhengbiao Zhang and Jian Zhu
Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202318564

Acridone Derivatives for Near-UV Radical Polymerization: One-Component Type II vs. Multicomponent Behaviors
Adel Noon, Francesco Calogero, Andrea Gualandi, Hiba Hammoud, Tayssir Hamieh, Joumana Toufaily, Fabrice Morlet-Savary, Michael Schmitt, Pier Giorgio Cozzi and Jacques Lalevée
Molecules, 2024, 29, 4715
DOI: 10.3390/molecules29194715

A Versatile 3D and 4D Printing System through Photocontrolled RAFT Polymerization
Zhiheng Zhang, Nathaniel Corrigan, Ali Bagheri, Jianyong Jin and Cyrille Boyer
Angew Chem Int Ed, 2019, 58, 17954
DOI: 10.1002/anie.201912608

Lithography-based 3D printed hydrogels: From bioresin designing to biomedical application
Hanieh Sadat Ghazali, Esfandyar Askari, Zahra Sadat Ghazali, Seyed Morteza Naghib and Thomas Braschler
Colloid and Interface Science Communications, 2022, 50, 100667
DOI: 10.1016/j.colcom.2022.100667

Multimaterial Vat Polymerization Additive Manufacturing
Kathleen L. Sampson, Bhavana Deore, Abigail Go, Milind Ajith Nayak, Antony Orth, Mary Gallerneault, Patrick R. L. Malenfant and Chantal Paquet
ACS Appl. Polym. Mater., 2021, 3, 4304
DOI: 10.1021/acsapm.1c00262

Fabrication and optimization of 3D printed gelatin methacryloyl microneedle arrays based on vat photopolymerization
Dilruba Baykara, Tuba Bedir, Elif Ilhan, Mehmet Eren Mutlu, Oguzhan Gunduz, Roger Narayan and Cem Bulent Ustundag
Front. Bioeng. Biotechnol., 2023, 11
DOI: 10.3389/fbioe.2023.1157541

Electrically Conductive Polymers for Additive Manufacturing
Yinjia Yan, Miao Han, Yixue Jiang, Evelyn Ling Ling Ng, Yanni Zhang, Cally Owh, Qing Song, Peng Li, Xian Jun Loh, Benjamin Qi Yu Chan and Siew Yin Chan
ACS Appl. Mater. Interfaces, 2024, 16, 5337
DOI: 10.1021/acsami.3c13258

Light-Based 3D Printing of Polymeric Materials
Ana Paula Kitos Vasconcelos, S. Cem Millik, Antonio Vazquez, Naroa Sadaba, Sahana Sateesh, Shannon Daily, Siwei Yu, Meijing Zhang, Natwara Manitsirisuk and Alshakim Nelson
Annual Review of Materials Research, 2025, 55, 491
DOI: 10.1146/annurev-matsci-080423-123810

Organic dye‐based photoinitiating systems for visible‐light‐induced photopolymerization
Ke Sun, Pu Xiao, Frédéric Dumur and Jacques Lalevée
Journal of Polymer Science, 2021, 59, 1338
DOI: 10.1002/pol.20210225

Modification of a desktop FFF printer via NIR laser addition for upconversion 3D printing
Adilet Zhakeyev, Rohith Devanathan and Jose Marques-Hueso
HardwareX, 2024, 18, e00520
DOI: 10.1016/j.ohx.2024.e00520

Photocured conductive PANI/acrylate composites for digital light processing. Influence of HDODA crosslinker in rheological and physicochemical properties
Goretti Arias-Ferreiro, Ana Ares-Pernas, M. Sonia Dopico-García, Aurora Lasagabáster-Latorre and María-José Abad
European Polymer Journal, 2020, 136, 109887
DOI: 10.1016/j.eurpolymj.2020.109887

Fast Hydrolytically Degradable 3D Printed Object Based on Aliphatic Polycarbonate Thiol‐Yne Photoresins
Yimei Wu, Miriam Cather Simpson and Jianyong Jin
Macro Chemistry & Physics, 2021, 222
DOI: 10.1002/macp.202000435

Photochemical Study of a Three‐Component Photocyclic Initiating System for Free Radical Photopolymerization: Implementing a Model for Digital Light Processing 3D Printing
Boris Metral, Adrien Bischoff, Christian Ley, Ahmad Ibrahim and Xavier Allonas
ChemPhotoChem, 2019, 3, 1109
DOI: 10.1002/cptc.201900167

In situ monitoring of photopolymerization by photoinitiator with luminescence characteristics
Jingfang Li, Sanbao Li, Yawei Li, Ruiqi Li, Jun Nie and Xiaoqun Zhu
Journal of Photochemistry and Photobiology A: Chemistry, 2020, 389, 112225
DOI: 10.1016/j.jphotochem.2019.112225

A Versatile 3D and 4D Printing System through Photocontrolled RAFT Polymerization
Zhiheng Zhang, Nathaniel Corrigan, Ali Bagheri, Jianyong Jin and Cyrille Boyer
Angewandte Chemie, 2019, 131, 18122
DOI: 10.1002/ange.201912608

Vinyl Sulfonate Esters: Efficient Chain Transfer Agents for the 3D Printing of Tough Photopolymers without Retardation
Konstanze Seidler, Markus Griesser, Markus Kury, Reghunathan Harikrishna, Peter Dorfinger, Thomas Koch, Anastasiya Svirkova, Martina Marchetti‐Deschmann, Juergen Stampfl, Norbert Moszner, Christian Gorsche and Robert Liska
Angew Chem Int Ed, 2018, 57, 9165
DOI: 10.1002/anie.201803747

Investigating Dynamic Changes in 3D‐Printed Covalent Adaptable Polymer Networks
Yixuan Jia, Christoph A. Spiegel, Juliane Diehm, Daniel Zimmermann, Birgit Huber, Hatice Mutlu, Matthias Franzreb, Manfred Wilhelm, Patrick Théato, Eva Blasco and Manuel Tsotsalas
Macro Materials & Eng, 2024, 309
DOI: 10.1002/mame.202300438

Dental Material Selection for the Additive Manufacturing of Removable Complete Dentures (RCD)
Dmitry I. Grachev, Evgeny A. Chizhmakov, Dmitry Yu. Stepanov, Dmitry G. Buslovich, Ibragim V. Khulaev, Aslan V. Deshev, Levon G. Kirakosyan, Anatoly S. Arutyunov, Svetlana Yu. Kardanova, Konstantin S. Panin and Sergey V. Panin
IJMS, 2023, 24, 6432
DOI: 10.3390/ijms24076432

Symmetrically-substituted Thiazolo[5,4-d]thiazole derivatives as both photoinitiators and dyes for 3D printing under violet LED
D. Zhu, X. Peng, P. Wagner and P. Xiao
Dyes and Pigments, 2022, 206, 110638
DOI: 10.1016/j.dyepig.2022.110638

Spotting Trends in Organocatalyzed and Other Organomediated (De)polymerizations and Polymer Functionalizations
María Valle, Marta Ximenis, Xabier Lopez de Pariza, Julian M. W. Chan and Haritz Sardon
Angew Chem Int Ed, 2022, 61
DOI: 10.1002/anie.202203043

Catalyst Halogenation Enables Rapid and Efficient Polymerizations with Visible to Far-Red Light
Alex Stafford, Dowon Ahn, Emily K. Raulerson, Kun-You Chung, Kaihong Sun, Danielle M. Cadena, Elena M. Forrister, Shane R. Yost, Sean T. Roberts and Zachariah A. Page
J. Am. Chem. Soc., 2020, 142, 14733
DOI: 10.1021/jacs.0c07136

Cutting-edge 3D printing in immunosensor design for early cancer detection
Sachin Kothawade and Vijaya Padwal
Microchim Acta, 2025, 192
DOI: 10.1007/s00604-024-06880-6

Tuning the Mechanical Properties of 3D‐Printed Objects by Mixing Chain Transfer Agents in Norrish Type I Photoinitiated RAFT Polymerization
Zhihan Yuan, Guangliang Li, Chongyang Yang, Wenxuan Zhu, Jiajia Li and Jian Zhu
Chemistry — An Asian Journal, 2024, 19
DOI: 10.1002/asia.202400648

Photoinduced 3D Printing via Hybrid RAFT/Cationic Polymerization
Chongyang Yang, Xiaofeng Pan, Zhihan Yuan, Xiangqiang Pan, Jiajia Li and Jian Zhu
Macromolecules, 2025, 58, 12264
DOI: 10.1021/acs.macromol.5c02907

A New Approach to Micromachining: High-Precision and Innovative Additive Manufacturing Solutions Based on Photopolymerization Technology
Paweł Fiedor and Joanna Ortyl
Materials, 2020, 13, 2951
DOI: 10.3390/ma13132951

3D-printed microneedles for sensing applications: Emerging topics and future trends
Kelcilene B.R. Teodoro, Tamires S. Pereira, Ana Laura M.M. Alves, Francisco V. dos Santos, Fabrício A. dos Santos and Daniel S. Correa
Advanced Sensor and Energy Materials, 2025, 4, 100139
DOI: 10.1016/j.asems.2025.100139

Microneedle‐Integrated Device for Transdermal Sampling and Analyses of Targeted Biomarkers
Shubhangi Shukla, Sina Azizi Machekposhti, Naveen Joshi, Pratik Joshi and Roger J. Narayan
Small Science, 2023, 3
DOI: 10.1002/smsc.202200087

A critical review on Classification of materials used in 3D printing process
Rajeev Ranjan, Deepak Kumar, Manoj Kundu and Subhash Chandra Moi
Materials Today: Proceedings, 2022, 61, 43
DOI: 10.1016/j.matpr.2022.03.308

Photochemical Study of a New Bimolecular Photoinitiating System for Vat Photopolymerization 3D Printing Techniques under Visible Light
Paweł Fiedor, Maciej Pilch, Patryk Szymaszek, Anna Chachaj-Brekiesz, Mariusz Galek and Joanna Ortyl
Catalysts, 2020, 10, 284
DOI: 10.3390/catal10030284

Comparison between mechanical properties and biocompatibility of experimental 3D printing denture resins according to photoinitiators
Da Ryeong Park and Ju lee Son
J. Tech. Dent., 2020, 42, 355
DOI: 10.14347/jtd.2020.42.4.355

Spotting Trends in Organocatalyzed and Other Organomediated (De)polymerizations and Polymer Functionalizations
María Valle, Marta Ximenis, Xabier Lopez de Pariza, Julian M. W. Chan and Haritz Sardon
Angewandte Chemie, 2022, 134
DOI: 10.1002/ange.202203043

Bicarbazole‐based oxalates as photoinitiating systems for photopolymerization under UV–Vis LEDs
Ruchun Zhou, Ming Jin, Jean‐Pierre Malval, Haiyan Pan and Decheng Wan
Journal of Polymer Science, 2020, 58, 1079
DOI: 10.1002/pol.20199298

Hot Lithography Vat Photopolymerisation 3D Printing: Vat Temperature vs. Mixture Design
Farzaneh Sameni, Basar Ozkan, Hanifeh Zarezadeh, Sarah Karmel, Daniel S. Engstrøm and Ehsan Sabet
Polymers, 2022, 14, 2988
DOI: 10.3390/polym14152988

Harnessing light to create functional, three-dimensional polymeric materials: multitasking initiation systems as the critical key to success
Wiktoria Tomal, Dominika Krok, Anna Chachaj-Brekiesz, Petr Lepcio and Joanna Ortyl
Additive Manufacturing, 2021, 48, 102447
DOI: 10.1016/j.addma.2021.102447

Multiphoton 3D Printing of Biopolymer-Based Hydrogels
Kostas Parkatzidis, Maria Chatzinikolaidou, Maria Kaliva, Athina Bakopoulou, Maria Farsari and Maria Vamvakaki
ACS Biomater. Sci. Eng., 2019, 5, 6161
DOI: 10.1021/acsbiomaterials.9b01300

Progress in Photocurable 3D Printing of Photosensitive Polyurethane: A Review
Jianhua Fei, Youjie Rong, Lisheng Zhu, Huijie Li, Xiaomin Zhang, Ying Lu, Jian An, Qingbo Bao and Xiaobo Huang
Macromol. Rapid Commun., 2023, 44
DOI: 10.1002/marc.202300211

双光子光刻中感光材料的回顾与挑战（特邀）
董芸 Dong Yun, 何向明 He Xiangming and 徐宏 Xu Hong
Chin. J. Laser, 2024, 51, 1202406
DOI: 10.3788/CJL240602

Recent progress of bio‐printed PEGDA‐based bioinks for tissue regeneration
Elham Hamedi, Negin Vahedi, Faraz Sigaroodi, Azim Parandakh, Simzar Hosseinzadeh, Faezeh Zeinali and Mohammad‐Mehdi Khani
Polymers for Advanced Techs, 2023, 34, 3505
DOI: 10.1002/pat.6164

The molecular builders of 3D printing: developing the next generation of safe and efficient visible light photoinitiators
Tong Gao, Jing Zhang, Fabrice Morlet-Savary, Michael Schmitt, Xiaotong Peng, Pu Xiao and Jacques Lalevée
Materials Today, 2026, 96, 103312
DOI: 10.1016/j.mattod.2026.103312

Control of Direct Written Ink Droplets Using Electrowetting
J. Plog, J.-M. Löwe, Y. Jiang, Y. Pan and A. L. Yarin
Langmuir, 2019, 35, 11023
DOI: 10.1021/acs.langmuir.9b01061

A Photoinduced Dual‐Wavelength Approach for 3D Printing and Self‐Healing of Thermosetting Materials
Zhiheng Zhang, Nathaniel Corrigan and Cyrille Boyer
Angew Chem Int Ed, 2022, 61
DOI: 10.1002/anie.202114111

Ring-Opening Polymerization (ROP) and Catalytic Rearrangement as a Way to Obtain Siloxane Mono- and Telechelics, as Well as Well-Organized Branching Centers: History and Prospects
Kseniya A. Bezlepkina, Sergey A. Milenin, Natalia G. Vasilenko and Aziz M. Muzafarov
Polymers, 2022, 14, 2408
DOI: 10.3390/polym14122408

Water additives improve the efficiency of violet perovskite light-emitting diodes
Manchen Hu, Sebastian Fernández, Qi Zhou, Pournima Narayanan, Balreen Saini, Tracy H. Schloemer, Junrui Lyu, Arynn O. Gallegos, Ghada H. Ahmed and Daniel N. Congreve
Matter, 2023, 6, 2356
DOI: 10.1016/j.matt.2023.05.018

Visible light and water-soluble photoinitiating system based on the charge transfer complex for free radical photopolymerization
Jingfang Li, Xin Zhang, Jun Nie and Xiaoqun Zhu
Journal of Photochemistry and Photobiology A: Chemistry, 2020, 402, 112803
DOI: 10.1016/j.jphotochem.2020.112803

A Comprehensive, Multidimensional First‐Principles Model for Free‐Radical Photopolymerizations in Bulk and Thin Films
Adam L. Dobson and Christopher N. Bowman
Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202312607

Additive manufacturing of smart 3D‐printed radiation shielding materials—An innovation in recent times
Kajal Yadav and Sarika Verma
Can J Chem Eng, 2026, 104, 2333
DOI: 10.1002/cjce.70143

Charge Transfer Complexes as Dual Thermal and Photochemical Polymerization Initiators for 3D Printing and Composites Synthesis
Dengxia Wang, Patxi Garra, Sami Lakhdar, Bernadette Graff, Jean Pierre Fouassier, Haifaa Mokbel, Mira Abdallah and Jacques Lalevée
ACS Appl. Polym. Mater., 2019, 1, 561
DOI: 10.1021/acsapm.8b00244

Shedding light on 3D printing: Printing photo-crosslinkable constructs for tissue engineering
Qiang Zhang, Ho-Pan Bei, Mengna Zhao, Zhifei Dong and Xin Zhao
Biomaterials, 2022, 286, 121566
DOI: 10.1016/j.biomaterials.2022.121566

Towards sustainable 3D Printing: A biodegradable hybrid resin from avocado oil and lignin
Laurine Eleonora Anne-Catherine Yoe, Xiangyu Zhu, Ana Laura Ruiz Deance, Daniël Hagedoorn, Frederik R. Wurm and Hubert Gojzewski
European Polymer Journal, 2025, 234, 114006
DOI: 10.1016/j.eurpolymj.2025.114006

Waste nitrile rubber powders enabling tougher 3D printing photosensitive resin composite
Shujun Tan, Yao Wu, Yang Hou, Haoyu Deng, Xiaoxuan Liu, Shoujuan Wang, Hongping Xiang, Minzhi Rong and Mingqiu Zhang
Polymer, 2022, 243, 124609
DOI: 10.1016/j.polymer.2022.124609

Recent Advances on Visible Light Metal-Based Photocatalysts for Polymerization under Low Light Intensity
Frédéric Dumur
Catalysts, 2019, 9, 736
DOI: 10.3390/catal9090736

Rhenium(I) N-Heterocyclic Carbene Complexes in Photoinitiating Systems for Polymerization upon Visible Light: Development of Photosensitive Resins for 3D and 4D Applications
Hong Chen, Yijun Zhang, Anna Bonfiglio, Fabrice Morlet-Savary, Matteo Mauro and Jacques Lalevée
ACS Appl. Polym. Mater., 2021, 3, 464
DOI: 10.1021/acsapm.0c01207

Renewable Photopolymers: Transformation of Biomass Resources into Value-Added Products Under Light
H. Lai, J. Zhang and P. Xiao
ACS Sustainable Chem. Eng., 2023, 11, 16365
DOI: 10.1021/acssuschemeng.3c05257

Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Sadettin Cem Altıparmak, Victoria A. Yardley, Zhusheng Shi and Jianguo Lin
Journal of Manufacturing Processes, 2022, 83, 607
DOI: 10.1016/j.jmapro.2022.09.032

Making and Breaking Chemical Bonds by Chemiluminescence
Katrin B. Kockler, Hendrik Frisch and Christopher Barner‐Kowollik
Macromol. Rapid Commun., 2018, 39
DOI: 10.1002/marc.201800516

Visible-Light-Sensitive Polymerizable and Polymeric Triazine-Based Photoinitiators with Enhanced Migration Stability
Liqiang Li, Di Zhu, Xiaotong Peng and Pu Xiao
Catalysts, 2022, 12, 1305
DOI: 10.3390/catal12111305

Supramolecular Ionic Gels with High Elasticity and Self-Healing Based on Polymeric Deep Eutectic Solvent for 3D-Printable Soft Sensors
Jun Hu, Xin Yao, Tianqiang Li, Xiaojie Li, Wei Wei and Jingcheng Liu
ACS Appl. Polym. Mater., 2023, 5, 9650
DOI: 10.1021/acsapm.3c02114

Ultrasensitive flexible pressure sensor for soft contraction detection
Brenda G. Molina, Júlia Sanz-Farnos, Samuel Sánchez and Carlos Alemán
Sensors and Actuators B: Chemical, 2024, 416, 136005
DOI: 10.1016/j.snb.2024.136005

Optical homogeneity and anisotropy of 3D printed silicate-aluminum-phosphate hybrid sol-gel materials via laser scan vat-photopolymerization
Gabriel T. Tayama, Paul Parant, Sandra H. Messaddeq, Erik Bélanger, Pierre Marquet, Tigran Galstian, Simon Thibault and Younes Messaddeq
J Sol-Gel Sci Technol, 2025, 116, 2334
DOI: 10.1007/s10971-025-06812-7

A novel sustainable luminescent ABS composite material for 3D printing
Miao Zhang, Wei Zeng, Yutong Lei, Xin Chen, Min Zhang, Chenyu Li and Shuhuan Qin
European Polymer Journal, 2022, 176, 111406
DOI: 10.1016/j.eurpolymj.2022.111406

Light‐Mediated Polymerization Catalyzed by Carbon Nanomaterials
Xiongfei Luo, Yingxiang Zhai, Ping Wang, Bing Tian, Shouxin Liu, Jian Li, Chenhui Yang, Veronika Strehmel, Shujun Li, Krzysztof Matyjaszewski, Gorkem Yilmaz, Bernd Strehmel and Zhijun Chen
Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202316431

Photoresins based on acrylated epoxidized soybean oil and benzenedithiols for optical 3D printing
Greta Miezinyte, Jolita Ostrauskaite, Egidija Rainosalo, Edvinas Skliutas and Mangirdas Malinauskas
RPJ, 2019, 25, 378
DOI: 10.1108/RPJ-04-2018-0101

Novel D‐π‐A hemicyanine dye as photoinitiators for in situ hydrogel formation and DLP printing
Yao Du, Yating Zhang, Shitao Liu, Xiwang Zhang and Tao Wang
Photochem & Photobiology, 2024, 100, 1759
DOI: 10.1111/php.13947

Recent advances in aminonitrile derivatives as components of visible light photoinitiating systems for photopolymerization processes in VPP 3D printing: photoinitiators in two- and multicomponent systems
Aneta Pietraszek, Filip Petko and Joanna Ortyl
European Polymer Journal, 2025, 237, 114162
DOI: 10.1016/j.eurpolymj.2025.114162

Castor oil‐based UV‐curable polyurethane acrylate resins for digital light processing (DLP) 3D printing technology
Haresh Bhanushali, Siddhesh Mestry and S. T. Mhaske
J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.53817

Recent Trends in Advanced Photoinitiators for Vat Photopolymerization 3D Printing
Yinyin Bao
Macromol. Rapid Commun., 2022, 43
DOI: 10.1002/marc.202200202

3D-printed microrobots from design to translation
Sajjad Rahmani Dabbagh, Misagh Rezapour Sarabi, Mehmet Tugrul Birtek, Siamak Seyfi, Metin Sitti and Savas Tasoglu
Nat Commun, 2022, 13
DOI: 10.1038/s41467-022-33409-3

The effect of perovskite on photopolymerization reaction of photocurable resin for plastic scintillators by stereolithography
Carola Esposito Corcione, Antonella Giuri, Amal C. Chekkallur, Mario Calora, Rosanna Mastria, Aurora Rizzo, Anna Paola Caricato and Alfonso Maffezzoli
J Therm Anal Calorim, 2025, 150, 6811
DOI: 10.1007/s10973-025-14219-3

Advanced micro-/nano additive manufacturing of multi-materials
Honghao Xiang, Zihan Xu, Haojie Lu and Mingchao Zhang
Nano Research, 2026, 19, 94908451
DOI: 10.26599/NR.2026.94908451

Fabrication of microfluidic devices by 3D printing: technology, materials, applications and prospects
Jinhao Zheng, Shaohua Ju, Xian Zhou and Shihong Tian
Results in Engineering, 2025, 28, 107270
DOI: 10.1016/j.rineng.2025.107270

Radical-Mediated Ring-Opening Photopolymerization for Semicrystalline Thermoplastic Additive Manufacturing
Alex J. Commisso, Gopal R. Sama and Timothy F. Scott
Chem. Mater., 2023, 35, 3825
DOI: 10.1021/acs.chemmater.2c03352

Effect of airborne particle abrasion treatment of two types of 3D-printing resin materials for permanent restoration materials on flexural strength
You-Jung Kang, Hoon Kim, Jiho Lee, Yeseul Park and Jee-Hwan Kim
Dental Materials, 2023, 39, 648
DOI: 10.1016/j.dental.2023.05.007

Print Me An Organ! Why We Are Not There Yet
Wei Long Ng, Chee Kai Chua and Yu-Fang Shen
Progress in Polymer Science, 2019, 97, 101145
DOI: 10.1016/j.progpolymsci.2019.101145

Three-Dimensional Bioprinting in Vascular Tissue Engineering and Tissue Vascularization of Cardiovascular Diseases
Ben Omondi Ochieng, Leqian Zhao and Zhiyi Ye
Tissue Engineering Part B: Reviews, 2024, 30, 340
DOI: 10.1089/ten.teb.2023.0175

Synergistic, Orthogonal, and Antagonistic Photochemistry for Light‐Induced 3D Printing
Jan Hobich, Eva Blasco, Martin Wegener, Hatice Mutlu and Christopher Barner‐Kowollik
Macro Chemistry & Physics, 2023, 224
DOI: 10.1002/macp.202200318

Yellow Triazine as an Efficient Photoinitiator for Polymerization and 3D Printing under LEDs
Haiwang Lai, Di Zhu and Pu Xiao
Macro Chemistry & Physics, 2019, 220
DOI: 10.1002/macp.201900315

Influence of Methacrylate and Vinyl Monomers on Radical Bulk Photopolymerization Process and Properties of Epoxy-Acrylate Structural Adhesives
Konrad Gziut, Agnieszka Kowalczyk, Beata Schmidt, Tomasz J. Idzik and Jacek G. Sośnicki
Polymers, 2023, 15, 926
DOI: 10.3390/polym15040926

3D printing in theranostic applications
Italo Rodrigo Calori, Ana Paula Pereira Guimaraes and Antonio Claudio Tedesco
Advanced Drug Delivery Reviews, 2026, 228, 115733
DOI: 10.1016/j.addr.2025.115733

Vat photopolymerization 3D printing optimization: Analysis of print conditions and print quality for complex geometries and ocular applications
Parvin Shokrollahi, Piyush Garg, David Wulff, Alex Hui, Chau-Minh Phan and Lyndon Jones
International Journal of Pharmaceutics, 2025, 668, 124999
DOI: 10.1016/j.ijpharm.2024.124999

3D Printing of Customized Drug Delivery Systems with Controlled Architecture via Reversible Addition‐Fragmentation Chain Transfer Polymerization
Ali Bagheri, Mitra Asadi-Eydivand, Adam A. Rosser, Christopher M. Fellows and Trevor C. Brown
Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202201785

Upconversion 3D printing enables single-immersion multi-material stereolithography
Adilet Zhakeyev, Mansour Abdulrhman, Yuqi Zhang, Feng Li, Guanying Chen and Jose Marques-Hueso
Applied Materials Today, 2023, 32, 101854
DOI: 10.1016/j.apmt.2023.101854

3D Printing of Bone Substitutes Based on Vat Photopolymerization Processes: A Systematic Review
Simon Enbergs, Jacob Spinnen, Tilo Dehne, Michael Sittinger and Catherine K. Kuo
Journal of Tissue Engineering and Regenerative Medicine, 2023, 2023, 1
DOI: 10.1155/2023/3901448

From Unregulated Networks to Designed Microstructures: Introducing Heterogeneity at Different Length Scales in Photopolymers for Additive Manufacturing
Mojtaba Ahmadi, Katharina Ehrmann, Thomas Koch, Robert Liska and Jürgen Stampfl
Chem. Rev., 2024, 124, 3978
DOI: 10.1021/acs.chemrev.3c00570

Dual-curing polymer systems for photo-curing 3D printing
Weizi Gao, Yunlong Guo, Jingjing Cui, Chen Liang, Zhe Lu, Shiwei Feng, Yongding Sun, Qixing Xia and Biao Zhang
Additive Manufacturing, 2024, 85, 104142
DOI: 10.1016/j.addma.2024.104142

A Photoinduced Dual‐Wavelength Approach for 3D Printing and Self‐Healing of Thermosetting Materials
Zhiheng Zhang, Nathaniel Corrigan and Cyrille Boyer
Angewandte Chemie, 2022, 134
DOI: 10.1002/ange.202114111

Continuous Polymer Synthesis and Manufacturing of Polyurethane Elastomers Enabled by Automation
Johann L. Rapp, Meredith A. Borden, Vittal Bhat, Alexis Sarabia and Frank A. Leibfarth
ACS Polym. Au, 2024, 4, 120
DOI: 10.1021/acspolymersau.3c00033

Photo‐differential scanning calorimetry parameter study of photopolymers used in digital light synthesis
Joel Bachmann, Stefan Schmölzer, Matthias A. Ruderer, Gabriele Fruhmann and Olaf Hinrichsen
SPE Polymers, 2022, 3, 41
DOI: 10.1002/pls2.10063

3D-Printed Hydrogels from Natural Polymers for Biomedical Applications: Conventional Fabrication Methods, Current Developments, Advantages, and Challenges
Berk Uysal, Ujith S. K. Madduma-Bandarage, Hasani G. Jayasinghe and Sundar Madihally
Gels, 2025, 11, 192
DOI: 10.3390/gels11030192

Lanthanide‐Doped Nanoparticles for Near‐Infrared Light Activation of Photopolymerization: Fundamentals, Optimization and Applications
Qin Li, Shanshan Yuan, Fangfang Liu, Xiaohui Zhu and Jinliang Liu
The Chemical Record, 2021, 21, 1681
DOI: 10.1002/tcr.202100093

Synthesis of UV Curable, Highly Stretchable, Transparent Poly(urethane-acrylate) Elastomer and Applications Toward Next Generation Technology
Seohyun Kim, Juheon Lee and Haksoo Han
Macromol. Res., 2020, 28, 896
DOI: 10.1007/s13233-020-8125-x

Comparative Photoinitiating Performances of Donor–Acceptor Multibranched Triphenylamines Designed for Light-Triggered Micropatterning Applications
Ruchun Zhou, Rana Mhanna, Ming Jin, Haiyan Pan, Decheng Wan, Davy-Louis Versace, Constance Thomas, Fabrice Morlet-Savary, Olivier Soppera and Jean-Pierre Malval
ACS Appl. Polym. Mater., 2021, 3, 3103
DOI: 10.1021/acsapm.1c00316

Rapid High-Resolution Visible Light 3D Printing
Dowon Ahn, Lynn M. Stevens, Kevin Zhou and Zachariah A. Page
ACS Cent. Sci., 2020, 6, 1555
DOI: 10.1021/acscentsci.0c00929

Model for polymerization and self-deactivation in two-photon nanolithography
Jason E. Johnson, Yijie Chen and Xianfan Xu
Opt. Express, 2022, 30, 26824
DOI: 10.1364/OE.461969

Linear Phosphazene Chloride‐Catalyzed Ethyl Siloxanes for Silicone Rubber: Trade‐Offs Between Mechanical Strength, Low‐Temperature Flexibility, and Hydrophobicity
Chen Jin, Weijie Yan, Tingyu Liu, Yixiao Shi, Yukai Wu, Chenxin Gong, Chaoran Li, Guang Li, Hong Dong, Zhirong Qu, Yanjiang Song and Chuan Wu
J of Applied Polymer Sci, 2025, 142
DOI: 10.1002/app.57860

Post‐Print Processing to Minimize Cytotoxicity of 3D‐Printed Photopolymer Resins for Biomedical Applications
Anne Katherine Brooks and Vamsi K. Yadavalli
J of Applied Polymer Sci, 2025, 142
DOI: 10.1002/app.56545

Chalcone-derived oxime esters with efficient photoinitiation properties under LED irradiation
Qian Wu, Mengda Xu, Tianjiao Ma, Shuzhen Yan, Jin Li and Xuesong Jiang
Chinese Chemical Letters, 2025, 36, 110427
DOI: 10.1016/j.cclet.2024.110427

Impact of graphene nanoparticles on DLP-printed parts' mechanical behavior
Md Imran Hossain, Ola L.A. Harrysson, Mohammad Asaduzzaman Chowdhury and Nayem Hossain
Advances in Industrial and Manufacturing Engineering, 2025, 10, 100153
DOI: 10.1016/j.aime.2024.100153

Effect of Zeolite Fillers on the Photopolymerization Kinetics for Photocomposites and Lithography
Yangyang Xu, Charles Jambou, Ke Sun, Jacques Lalevée, Angélique Simon-Masseron and Pu Xiao
ACS Appl. Polym. Mater., 2019, 1, 2854
DOI: 10.1021/acsapm.9b00557

Orthogonal photochemistry-assisted printing of 3D tough and stretchable conductive hydrogels
Hongqiu Wei, Ming Lei, Ping Zhang, Jinsong Leng, Zijian Zheng and You Yu
Nat Commun, 2021, 12
DOI: 10.1038/s41467-021-21869-y

Photophysical/Photochemical, Kinetic, and Migration Stability Studies of One‐Component Polymerizable Thioxanthone‐Based Photoinitiators
Qingqing Wu, Yongfei Mo, Yachao Zhang, Fushao Li and Mingsen Deng
Macro Chemistry & Physics, 2021, 222
DOI: 10.1002/macp.202100221

Adaptable Manufacturing and Biofabrication of Milliscale Organ Chips With Perfusable Vascular Beds
Charles Ethan Byrne, Ashley T. Martier, Gideon Wills Kpeli, Kevin Michael Conrad, William Bralower, Elisabet Olsen, Gabrielle Fortes, Caroline C. Culp, Max Wendell, Keefer A. Boone, Matthew R. Burow and Mark J. Mondrinos
Biotechnology Journal, 2024, 19
DOI: 10.1002/biot.202400550

Beneficial stilbene-based derivatives: From the synthesis of new catalytic photosensitizer to 3D printouts and fiber-reinforced composites
Wiktoria Tomal, Dominika Krok, Anna Chachaj-Brekiesz and Joanna Ortyl
European Polymer Journal, 2021, 156, 110603
DOI: 10.1016/j.eurpolymj.2021.110603

3D printing of conductive organic polymers: challenges and opportunities towards dynamic and electrically responsive materials
Angelo Martinelli, Andrea Nitti, Giorgio Giannotta, Riccardo Po and Dario Pasini
Materials Today Chemistry, 2022, 26, 101135
DOI: 10.1016/j.mtchem.2022.101135

Three-Dimensional Nanolithography with Visible Continuous Wave Laser through Triplet Up-Conversion
Zhijun Luo, Duan Wang, Kai Li, Dong Zhong, Li Xue, Zongsong Gan and Changsheng Xie
J. Phys. Chem. Lett., 2023, 14, 709
DOI: 10.1021/acs.jpclett.2c03601

Research on mechanical properties of ink‐jet, UV‐thermal dual‐cured 3D printing materials and a comparison of the properties of ink‐jet, LCD and UV‐thermal dual‐cured 3D printing materials
Huagen Xu, Muchao Qu, Qiancheng Yang and Baoquan Chen
Polymers for Advanced Techs, 2023, 34, 2913
DOI: 10.1002/pat.6109

Impact of Base Rubber and Cure Systems in Additive Manufacturing of Fully Compounded Thermoset Elastomers
AA Mubasshir, Stiven Kodra, Chandramouli Sangeetham, David O. Kazmer and Joey L. Mead
Polymers, 2026, 18, 540
DOI: 10.3390/polym18040540

Centimeter-Scale Curing Depths in Laser-Assisted 3D Printing of Photopolymers Enabled by Er3+ Upconversion and Green Light-Absorbing Photosensitizer
Adilet Zhakeyev and Jose Marques-Hueso
Photonics, 2022, 9, 498
DOI: 10.3390/photonics9070498

Advances in precision microfabrication through digital light processing: system development, material and applications
Xinhui Wang, Jinghang Liu, Yang Zhang, Per Magnus Kristiansen, Aminul Islam, Michael Gilchrist and Nan Zhang
Virtual and Physical Prototyping, 2023, 18
DOI: 10.1080/17452759.2023.2248101

Efficient Solar‐Driven Polymerization Enabled by Triplet Excited State‐Mediated Electron Transfer in Benzothioxanthene Imide Photocatalysts
Weiqiang Li, Zhiyao Nian, Junwen Gao, Zhaoxi Liu, Zafar Mahmood, Zecong Ye, Hui Liang, Guoxing Xu, Yuxi Sun, Yanping Huo and Shaomin Ji
Advanced Optical Materials, 2026
DOI: 10.1002/adom.71198

Effect of ketyl radical on the structure and performance of holographic polymer/liquid-crystal composites
Xiaoyu Zhao, Shanshan Sun, Ye Zhao, Rong-Zhen Liao, Ming-De Li, Yonggui Liao, Haiyan Peng and Xiaolin Xie
Sci. China Mater., 2019, 62, 1921
DOI: 10.1007/s40843-019-9580-y

Type I Photoinitiator Based on Sustainable Carbon Dots
Ruiping Li, Hongda Guo, Xiongfei Luo, Qunying Wang, Yulian Pang, Shujun Li, Shouxin Liu, Jian Li, Bernd Strehmel and Zhijun Chen
Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202404454

Application of Stereolithography Based 3D Printing Technology in Investment Casting
Muslim Mukhtarkhanov, Asma Perveen and Didier Talamona
Micromachines, 2020, 11, 946
DOI: 10.3390/mi11100946

Photoinduced Polymerization of Eugenol-Derived Methacrylates
Samantha Molina-Gutiérrez, Sara Dalle Vacche, Alessandra Vitale, Vincent Ladmiral, Sylvain Caillol, Roberta Bongiovanni and Patrick Lacroix-Desmazes
Molecules, 2020, 25, 3444
DOI: 10.3390/molecules25153444

Challenges and Opportunities in 3D Printing of Biodegradable Medical Devices by Emerging Photopolymerization Techniques
Yinyin Bao, Nevena Paunović and Jean‐Christophe Leroux
Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202109864

Disubstituted Aminoanthraquinone-Based Multicolor Photoinitiators: Photoinitiation Mechanism and Ability of Cationic Polymerization under Blue, Green, Yellow, and Red LEDs
J. Zhang, J. Lalevée, N. S. Hill, K. Launay, F. Morlet-Savary, B. Graff, M. H. Stenzel, M. L. Coote and P. Xiao
Macromolecules, 2018, 51, 8165
DOI: 10.1021/acs.macromol.8b01763

Emerging micro-additive manufacturing technologies enabled by novel optical methods
Wei Lin, Dihan Chen and Shih-Chi Chen
Photon. Res., 2020, 8, 1827
DOI: 10.1364/PRJ.404334

Accurately Predicting Multiple Performance of 3D Printing Photopolymers Using Ensemble Learning
Wenjie Gao, Honglei Wang, Yuanhang Xu, Yaping Yang, Quanchao Gu, Xiaojun Duan, Binglin Wang and Xingui Zhou
ACS Appl. Polym. Mater., 2024, 6, 4501
DOI: 10.1021/acsapm.3c03102

Organische Photosäuren‐ und Photobasenbildner für Polymerisationen: Jüngste Fortschritte und Herausforderungen
Nicolas Zivic, Paula K. Kuroishi, Frédéric Dumur, Didier Gigmes, Andrew P. Dove and Haritz Sardon
Angewandte Chemie, 2019, 131, 10518
DOI: 10.1002/ange.201810118

Reversible bond formation via sulfur free reversible addition fragmentation in photo-3D printing
Zhongyuan Wan, Lee Wai Hin, Ataulla Shegiwal and David Haddleton
European Polymer Journal, 2023, 196, 112324
DOI: 10.1016/j.eurpolymj.2023.112324

Technological Advancement and Trend in Selective Bioanalytical Sample Extraction through State of the Art 3-D Printing Techniques Aiming ‘Sorbent Customization as per need’
Nasir Khan and Pinaki Sengupta
Critical Reviews in Analytical Chemistry, 2025, 55, 702
DOI: 10.1080/10408347.2024.2305275

Enabling Selective Mechanochemical Scission of Network Crosslinks by Exchanging Single Carbon Atoms for Silicon
Sophia J. Melvin, Yunxin Yao, Xiao Huang, Rowina C. Bell, Ryann E. Kemmerling, Ilia Kevlishvili, Angus C. Berg, Ana Paula Kitos Vasconcelos, Alshakim Nelson, Heather J. Kulik, Stephen L. Craig and Rebekka S. Klausen
J. Am. Chem. Soc., 2025, 147, 6006
DOI: 10.1021/jacs.4c16323

Synthesis of Crosslinkable Polyetherimide and Application as an Additive in 3D Printing of Photopolymers
Jae Hwan Chung, Seo Yeong Ma, Robert Bail and Dong Hyun Lee
Macromol. Res., 2022, 30, 43
DOI: 10.1007/s13233-022-0007-y

Enhancing the Toughness of UV-Curable Methacrylic Resins by Self-Assembled PB-b-PMMA Diblock Copolymers
Tobias Baeyens, Kai Rist, Yohann Catel, Sabine Rosenfeldt, Holger Schmalz and Seema Agarwal
Macromolecules, 2024, 57, 7293
DOI: 10.1021/acs.macromol.4c01108

3D Printing of Thiol‐Yne Photoresins through Visible Light Photoredox Catalysis
Yimei Wu, M. Cather Simpson and Jianyong Jin
ChemistrySelect, 2022, 7
DOI: 10.1002/slct.202200319

RAFT-Mediated 3D Printing of “Living” Materials with Tailored Hierarchical Porosity
Mitra Asadi-Eydivand, Trevor C. Brown and Ali Bagheri
ACS Appl. Polym. Mater., 2022, 4, 4940
DOI: 10.1021/acsapm.2c00500

Hydrogen Bonding Enhances the Crystallinity of Polymer Networks Synthesized by Rapid and Solventless Photopolymerization
Caleb J. Reese, Grant M. Musgrave, Paul Cardon, Huiwen Ji, Maxim Shusteff and Chen Wang
ACS Macro Lett., 2025, 14, 1189
DOI: 10.1021/acsmacrolett.5c00406

Polyethylene glycol modified epoxy acrylateUVcurable3Dprinting materials
Yiyang Wang, Cheng Li, Xiaohang Tuo, Yumei Gong and Jing Guo
J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.50102

Difunctional 1H-quinolin-2-ones as spectroscopic fluorescent probes for real-time monitoring of photopolymerisation process and photosensitizers of fluorescent photopolymer resin in 3D printing
Monika Topa, Filip Petko, Mariusz Galek, Magdalena Jankowska, Roman Popielarz and Joanna Ortyl
European Polymer Journal, 2021, 156, 110612
DOI: 10.1016/j.eurpolymj.2021.110612

Tetramethacrylic benzylidene cyclopentanone dye for one- and two-photon photopolymerization
Elnara R. Zhiganshina, Maxim V. Arsenyev, Dmytro A. Chubich, Danila A. Kolymagin, Anastasia V. Pisarenko, Dmitry S. Burkatovsky, Evgeny V. Baranov, Alexei G. Vitukhnovsky, Andrew N. Lobanov, Rilond P. Matital, Diana Ya. Aleynik and Sergey A. Chesnokov
European Polymer Journal, 2022, 162, 110917
DOI: 10.1016/j.eurpolymj.2021.110917

Photocurable Printed Piezocapacitive Pressure Sensor Based on an Acrylic Resin Modified with Polyaniline and Lignin
Goretti Arias‐Ferreiro, Ana Ares‐Pernas, Aurora Lasagabáster‐Latorre, M. Sonia Dopico‐García, Pablo Ligero, N. Pereira, P. Costa, S. Lanceros‐Mendez and María‐José Abad
Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202101503

Photopolymerization in 3D Printing
Ali Bagheri and Jianyong Jin
ACS Appl. Polym. Mater., 2019, 1, 593
DOI: 10.1021/acsapm.8b00165

Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges
Wei Long Ng, Jia Min Lee, Miaomiao Zhou, Yi-Wen Chen, Kai-Xing Alvin Lee, Wai Yee Yeong and Yu-Fang Shen
Biofabrication, 2020, 12, 022001
DOI: 10.1088/1758-5090/ab6034

Tunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose
Pramod Dorishetty, Rajkamal Balu, Sandya S. Athukoralalage, Tamar L. Greaves, Jitendra Mata, Liliana de Campo, Nabanita Saha, Andrew C. W. Zannettino, Naba K. Dutta and Namita Roy Choudhury
ACS Sustainable Chem. Eng., 2020, 8, 2375
DOI: 10.1021/acssuschemeng.9b05317

Solvent-Free Three-Dimensional Printing of Biodegradable Elastomers Using Liquid Macrophotoinitiators
Matthias Sandmeier, Nevena Paunović, Riccardo Conti, Leopold Hofmann, Jieping Wang, Zhi Luo, Kunal Masania, Na Wu, Nicole Kleger, Fergal Brian Coulter, André R. Studart, Hansjörg Grützmacher, Jean-Christophe Leroux and Yinyin Bao
Macromolecules, 2021, 54, 7830
DOI: 10.1021/acs.macromol.1c00856

Tris‐benzo[cd]indole Cyanine Enables the NIR‐photosensitized Radical and Thiol‐ene Polymerizations at 940 nm
Christine Elian, Benjamin Mourot, Camil Benbouziyane, Jean‐Pierre Malval, Sonia Lajnef, Fabienne Peyrot, Florian Massuyeau, Olivier Siri, Denis Jacquemin, Simon Pascal and Davy‐Louis Versace
Angew Chem Int Ed, 2023, 62
DOI: 10.1002/anie.202305963

Conjugated Bifunctional Carbazole‐Based Oxime Esters: Efficient and Versatile Photoinitiators for 3D Printing under One‐ and Two‐Photon Excitation
Peng Hu, Wanwan Qiu, Sergej Naumov, Tom Scherzer, Zhiyong Hu, Qidai Chen, Wolfgang Knolle and Zhiquan Li
ChemPhotoChem, 2020, 4, 224
DOI: 10.1002/cptc.201900246

Influence of3Dprinting process parameters on the tribological properties of acrylic resin
Liang Yu, Yanan Zhu, Lei Wang, Jin Zhang, Jiping Zhou and Yan Fu
J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.53448

A Review on the Application of 3D Printing Technology in Pavement Maintenance
Fangyuan Gong, Xuejiao Cheng, Qinghua Wang, Yi Chen, Zhanping You and Yu Liu
Sustainability, 2023, 15, 6237
DOI: 10.3390/su15076237

Functional Materials for DLP-SLA 3D Printing Using Thiol–Acrylate Chemistry: Resin Design and Postprint Applications
Lubna Shahzadi, Fernando Maya, Michael C. Breadmore and Stuart C. Thickett
ACS Appl. Polym. Mater., 2022, 4, 3896
DOI: 10.1021/acsapm.2c00358

New Efficient D‐π‐A and A‐π‐A Structured Type I Radical Photoinitiators for Additive Manufacturing Nanomaterials Preparation
Andrzej Świeży, Filip Petko, Dominika Krok‐Janiszewska, Patryk Szymaszek, Mariusz Galek and Joanna Ortyl
Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202402139

Predictive Approaches for 3D‐Printing: Methods and Approaches for Polymeric Materials
Isabel Cooley, Weiling Wang, Vladimir Kozyrev, Ricky D. Wildman, Blair F. Johnston and Anna K. Croft
WIREs Comput Mol Sci, 2025, 15
DOI: 10.1002/wcms.70048

Aryl structural effect on the photoinitiation abilities of aryl glycine derivatives for polymerization upon exposure to blue light
H. Lai, X. Peng, D. Zhu, J. Zhang and P. Xiao
Applied Research, 2024, 3
DOI: 10.1002/appl.202400080

High Refractive Index Monomers for Improving the Holographic Recording Performance of Two-Stage Photopolymers
Bin Guo, Mingxuan Wang, Diqin Zhang, Minyuan Sun, Yong Bi and Yuxia Zhao
ACS Appl. Mater. Interfaces, 2023, 15, 24827
DOI: 10.1021/acsami.3c01446

Ceramic shell fabrication via Stereo Lithography Apparatus: Recent progress on cracking problems and preventive measures
Zhihui Li, Yaozhong Zhang, Xiaoyan Chen, Liangliang Lu, Hao Yi, Lan Cheng, Qingxiao Yu, Jinsong Ma, Jianying Yang, Fan Peng, Longjiang Zhang and Fei Li
Journal of Materials Research and Technology, 2024, 28, 1341
DOI: 10.1016/j.jmrt.2023.12.069

Biodegradable, Solvent‐Free Photocrosslinkable PLLA Resin Formulations for Additive Manufacturing
Shibam Pal and Asha S. K.
Macro Chemistry & Physics, 2022, 223
DOI: 10.1002/macp.202200139

Catalytically Active Light Printed Microstructures
Alicia K. Finch, Sebastian Gillhuber, Hendrik Frisch, Peter W. Roesky and Christopher Barner‐Kowollik
Advanced Materials, 2025, 37
DOI: 10.1002/adma.202506663

Degradation Benefits Polymerization: Photogenerated Self-Degradable Organocatalyst for Higher-Efficiency ATRP and Pure Polymers
Yan Luo, Lingpu Jia, Yanghong Xu, Enmin Hu, Meekyung Song, Xiaofeng Zhu, Youngsoo Kang, Yun Huang and Long Yang
ACS Appl. Polym. Mater., 2024, 6, 5856
DOI: 10.1021/acsapm.4c00513

Development of a quaternary photocurable system for 3D printing based on the addition of acrylate monomers to an epoxy/thiol‐Ene system
Ricardo Acosta Ortiz, Alan Isaac Hernandez Jiménez, José de Jesus Ku Herrera and Alejandro May Pat
Journal of Polymer Science, 2024, 62, 4642
DOI: 10.1002/pol.20240366

Polymerizable Oxime Esters: An Efficient Photoinitiator with Low Migration Ability for 3D Printing to Fabricate Luminescent Devices
Wanwan Qiu, Junzhe Zhu, Kurt Dietliker and Zhiquan Li
ChemPhotoChem, 2020, 4, 5296
DOI: 10.1002/cptc.202000146

Modeling of Free-Radical Polymerization under Periodic Photoinitiation
D. E. Roshchin, S. A. Patlazhan and A. A. Berlin
Polym. Sci. Ser. B, 2022, 64, 78
DOI: 10.1134/S1560090422010067

3D-Printed Contact Lenses to Release Polyvinyl Alcohol as a Therapeutic Agent for the Treatment of Dry Eyes
Piyush Garg, Parvin Shokrollahi, Haile Fentahun Darge, Chau-Minh Phan and Lyndon Jones
Pharmaceutics, 2025, 17, 219
DOI: 10.3390/pharmaceutics17020219

Lichtinduzierte Polymerisation katalysiert durch Kohlenstoff‐Nanomaterialien
Xiongfei Luo, Yingxiang Zhai, Ping Wang, Bing Tian, Shouxin Liu, Jian Li, Chenhui Yang, Veronika Strehmel, Shujun Li, Krzysztof Matyjaszewski, Gorkem Yilmaz, Bernd Strehmel and Zhijun Chen
Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202316431

Thiol-ene-based degradable 3D printed network from bio resource derived monomers ethyl-lactate and isosorbide
Shibam Pal and S.K. Asha
European Polymer Journal, 2024, 205, 112761
DOI: 10.1016/j.eurpolymj.2024.112761

Preparation of free radical/cationic hybrid UV-cured silicone materials with reducing oxygen inhibition via silyl radicals
Xiaoquan Li, Fuping Bian, Rui Huang, Jiyan Wei, Xuefeng Gui, Jiwen Hu and Shudong Lin
European Polymer Journal, 2024, 221, 113582
DOI: 10.1016/j.eurpolymj.2024.113582

Photopolymerization Approach to Advanced Polymer Composites: Integration of Surface‐Modified Nanofillers for Enhanced Properties
Xiaotong Peng, Jing Zhang and Pu Xiao
Advanced Materials, 2024, 36
DOI: 10.1002/adma.202400178

Digital light processing 3D printing of multi-materials with improved adhesion using resins containing low functional acrylates
Hyeonwoo Hwangbo and Seog-Jin Jeon
Korean J. Chem. Eng., 2022, 39, 451
DOI: 10.1007/s11814-021-0934-x

Hot ceramic lithography of silica-based ceramic cores: The effect of process temperature on vat-photopolymierisation
Basar Ozkan, Farzaneh Sameni, Athanasios Goulas, Sarah Karmel, Daniel S. Engstrøm and Ehsan Sabet
Additive Manufacturing, 2022, 58, 103033
DOI: 10.1016/j.addma.2022.103033

Hydrogel Polyester Scaffolds via Direct-Ink-Writing of Ad Hoc Designed Photocurable Macromonomer
Tiziana Fuoco, Mo Chen, Shubham Jain, Xi Vincent Wang, Lihui Wang and Anna Finne-Wistrand
Polymers, 2022, 14, 711
DOI: 10.3390/polym14040711

Charge Transfer Complexes based on Various Amines as Dual Thermal and Photochemical Polymerization Initiators: A Powerful Tool for the Access to Composites
Dengxia Wang, Ahmad Arar, Patxi Garra, Bernadette Graff and Jacques Lalevée
Journal of Polymer Science, 2020, 58, 811
DOI: 10.1002/pol.20190248

Fabrication of Soft Transparent Patient‐Specific Vascular Models with Stereolithographic 3D printing and Thiol‐Based Photopolymerizable Coatings
Elnaz Hosseinzadeh, Beatriz Bosques‐Palomo, Francisco Carmona‐Arriaga, Mario Alejandro Fabiani and Alan Aguirre‐Soto
Macromol. Rapid Commun., 2024, 45
DOI: 10.1002/marc.202300611

Development of fabrics by digital light processing three-dimensional printing technology and using a polyurethane acrylate photopolymer
Seul Gi Kim, Ji Eun Song and Hye Rim Kim
Textile Research Journal, 2020, 90, 847
DOI: 10.1177/0040517519881821

Low Dielectric Constant Photocurable Fluorinated Poly (Phthalazinone Ether) Ink with Excellent Mechanical Properties and Heat Resistance
Guangsheng Zhang, Chenghao Wang, Lingmei Jiang, Yibo Wang, Bing Wang, Xiaoxu Wang, Haoran Liu, Lishuai Zong, Jinyan Wang and Xigao Jian
Polymers, 2023, 15, 1531
DOI: 10.3390/polym15061531

Investigation of SiO2 Nanoparticle Reinforced Epoxy Composites Produced by Additive Manufacturing: Effect of Silanization on Conversion Degree and Mechanical Properties
Berk Özler and Serdar Yıldırım
Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi, 2025, 4, 12
DOI: 10.69560/cujast.1616786

Novel monomers for photopolymer networks
H. Lai, X. Peng, L. Li, D. Zhu and P. Xiao
Progress in Polymer Science, 2022, 128, 101529
DOI: 10.1016/j.progpolymsci.2022.101529

An overview on potential of novel photoinitiators for vat photopolymerization-based 3D/4D printing formulations
Amirhossein Enayati-Gerdroodbar, Amirreza Khayati, Mostafa Ahmadi, Behzad Pourabbas, M. Ali Aboudzadeh and Mehdi Salami-Kalajahi
European Polymer Journal, 2024, 221, 113552
DOI: 10.1016/j.eurpolymj.2024.113552

Methacrylated Quinizarin Derivatives for Visible-Light Mediated Photopolymerization: Promising Applications in 3D-Printing Biosourced Materials under LED@405 nm
Louise Breloy, Vlasta Brezová, Zuzana Barbieriková, Yoshihiro Ito, Jun Akimoto, Annalisa Chiappone, Samir Abbad-Andaloussi, Jean-Pierre Malval and Davy-Louis Versace
ACS Appl. Polym. Mater., 2022, 4, 210
DOI: 10.1021/acsapm.1c01210

Influence of Post-Curing Time and Print Orientation on the Mechanical Behavior of Photosensitive Resins in mSLA 3D Printing
Geraldo Cesar Rosario de Oliveira, Vania Aparecida Rosario de Oliveira, Carla Carvalho Pinto, Luis Felipe Barbosa Marques, Tuane Stefania Reis dos Santos, Antonio dos Reis de Faria Neto, Carlos Alexis Alvarado Silva, Marcelo Sampaio Martins, Fernando de Azevedo Silva and Erick Siqueira Guidi
Applied Mechanics, 2025, 6, 71
DOI: 10.3390/applmech6030071

Vision-controlled jetting for composite systems and robots
Thomas J. K. Buchner, Simon Rogler, Stefan Weirich, Yannick Armati, Barnabas Gavin Cangan, Javier Ramos, Scott T. Twiddy, Davide M. Marini, Aaron Weber, Desai Chen, Greg Ellson, Joshua Jacob, Walter Zengerle, Dmitriy Katalichenko, Chetan Keny, Wojciech Matusik and Robert K. Katzschmann
Nature, 2023, 623, 522
DOI: 10.1038/s41586-023-06684-3

Three-Dimensional Printing and Recycling of Multifunctional Composite Material Based on Commercial Epoxy Resin and Graphene Nanoplatelet
Hang Chi, Zewen Lin, Yuxin Chen, Renhao Zheng, Hong Qiu, Xiaolan Hu and Hua Bai
ACS Appl. Mater. Interfaces, 2022, 14, 13758
DOI: 10.1021/acsami.2c00910

Revolutionizing healthcare: Emerging frontiers in 3D bioprinting of tissues and organs
Ochieng Ben Omondi, Yasinta Nida Arroyan, Benson Onyango, Lingwen Kong, Guixue Wang and Zhiyi Ye
European Polymer Journal, 2024, 217, 113210
DOI: 10.1016/j.eurpolymj.2024.113210

Three-Dimensional Printing Fully Biobased Heat-Resistant Photoactive Acrylates from Aliphatic Biomass
Jia-Tao Miao, Shuqiang Peng, Meiying Ge, Yuewei Li, Jie Zhong, Zixiang Weng, Lixin Wu and Longhui Zheng
ACS Sustainable Chem. Eng., 2020, 8, 9415
DOI: 10.1021/acssuschemeng.0c02168

UV-induced disulfide metathesis: Strengthening interlayer adhesion and rectifying warped 3D printed materials
Shichong Wang, Jingfeng Yin, Weibing Huang, Juan Ye, Haoyu Deng, Junjie Huang, Shoujuan Wang, Xiaoxuan Liu and Hongping Xiang
Additive Manufacturing, 2022, 59, 103085
DOI: 10.1016/j.addma.2022.103085

Efficient Photoinitiating System Based on Diaminoanthraquinone for 3D Printing of Polymer/Carbon Nanotube Nanocomposites under Visible Light
Guannan Wang, Nicholas S. Hill, Di Zhu, Pu Xiao, Michelle L. Coote and Martina H. Stenzel
ACS Appl. Polym. Mater., 2019, 1, 1129
DOI: 10.1021/acsapm.9b00140

Water-Soluble Photoinitiators in Biomedical Applications
Wiktoria Tomal and Joanna Ortyl
Polymers, 2020, 12, 1073
DOI: 10.3390/polym12051073

Lignin as a High-Value Bioaditive in 3D-DLP Printable Acrylic Resins and Polyaniline Conductive Composite
Goretti Arias-Ferreiro, Aurora Lasagabáster-Latorre, Ana Ares-Pernas, Pablo Ligero, Sandra María García-Garabal, María Sonia Dopico-García and María-José Abad
Polymers, 2022, 14, 4164
DOI: 10.3390/polym14194164

Correlation between Critical Energy, Penetration Depth, and Photopolymerization Kinetics in Aluminum–Phosphate–Silicate Hybrid Materials for Vat Photopolymerization
Gabriel Toshiaki Tayama, Sandra Helena Messaddeq, Silvia Helena Santagneli and Younes Messaddeq
Macromolecules, 2023, 56, 3891
DOI: 10.1021/acs.macromol.3c00363

3D-Printed Immunosensor Arrays for Cancer Diagnostics
Mohamed Sharafeldin, Karteek Kadimisetty, Ketki S. Bhalerao, Tianqi Chen and James F. Rusling
Sensors, 2020, 20, 4514
DOI: 10.3390/s20164514

Three-Dimensional Engineered Peripheral Nerve: Toward a New Era of Patient-Specific Nerve Repair Solutions
Omar A. Selim, Saad Lakhani, Swati Midha, Afshin Mosahebi and Deepak M. Kalaskar
Tissue Engineering Part B: Reviews, 2022, 28, 295
DOI: 10.1089/ten.teb.2020.0355

3D bioprinting: current status and trends—a guide to the literature and industrial practice
Silvia Santoni, Simone G. Gugliandolo, Mattia Sponchioni, Davide Moscatelli and Bianca M. Colosimo
Bio-des. Manuf., 2022, 5, 14
DOI: 10.1007/s42242-021-00165-0

Photoinduced 3D Printing through a Combination of Cationic and Radical RAFT Polymerization
Bowen Zhao, Jiajia Li, Zhuang Li, Xia Lin, Xiangqiang Pan, Zhengbiao Zhang and Jian Zhu
Macromolecules, 2022, 55, 7181
DOI: 10.1021/acs.macromol.2c00841

Influence of the Type of Nanofillers on the Properties of Composites Used in Dentistry and 3D Printing
Małgorzata Noworyta, Monika Topa-Skwarczyńska, Paweł Jamróz, Dawid Oksiuta, Małgorzata Tyszka-Czochara, Klaudia Trembecka-Wójciga and Joanna Ortyl
IJMS, 2023, 24, 10549
DOI: 10.3390/ijms241310549

Advanced ceramics via digital light processing: Performance enhancement and potential applications
Longhao Yu, Zhongkan Ren and Zhuhui Qiao
J Am Ceram Soc., 2025, 108
DOI: 10.1111/jace.70062

Vat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xiaoyan Xu, Atheer Awad, Pamela Robles-Martinez, Simon Gaisford, Alvaro Goyanes and Abdul W. Basit
Journal of Controlled Release, 2021, 329, 743
DOI: 10.1016/j.jconrel.2020.10.008

Toxicity of Plastic Additive 1-Hydroxycyclohexyl Phenyl Ketone (1-HCHPK) to Freshwater Microcrustaceans in Natural Water
Irina Blinova, Aljona Lukjanova, Heiki Vija, Monika Mortimer and Margit Heinlaan
Water, 2023, 15, 3213
DOI: 10.3390/w15183213

Taguchi optimization of mask stereolithographic 3D printing parameters for tensile strengthening of functionally graded resins
Hanieh Sharifi, Ali Adib, Zohre Ahmadi, Eser Gemikonakli and Mehdi Shahedi Asl
Int J Interact Des Manuf, 2024, 18, 4899
DOI: 10.1007/s12008-024-01839-6

Sustainable Photopolymers in 3D Printing: A Review on Biobased, Biodegradable, and Recyclable Alternatives
Vincent S. D. Voet, Jarno Guit and Katja Loos
Macromol. Rapid Commun., 2021, 42
DOI: 10.1002/marc.202000475

Radical chemistry in polymer science: an overview and recent advances
Zixiao Wang, Feichen Cui, Yang Sui and Jiajun Yan
Beilstein J. Org. Chem., 2023, 19, 1580
DOI: 10.3762/bjoc.19.116

Layer-by-Layer Printing of Photopolymers in 3D: How Weak is the Interface?
H. Gojzewski, Z. Guo, W. Grzelachowska, M. G. Ridwan, M. A. Hempenius, D. W. Grijpma and G. J. Vancso
ACS Appl. Mater. Interfaces, 2020, 12, 8908
DOI: 10.1021/acsami.9b22272

High-performance new photoinitiators for the preparation of functional photocurable polymer composites
Monika Topa-Skwarczyńska, Filip Petko, Dominika Krok, Mariusz Galek and Joanna Ortyl
European Polymer Journal, 2023, 196, 112282
DOI: 10.1016/j.eurpolymj.2023.112282

Synthesis and Application of New Benzophenone Photoinitiators
Chao Feng, Qin Lin Wang, Feng Liu and Bianxiang Zhang
ChemistrySelect, 2023, 8
DOI: 10.1002/slct.202302572

Thiol-ene-acrylate Ternary Photosensitive Resins for DLP 3D Printing
Chong Wang, Chen Wang and Zhiquan Li
J. Photopol. Sci. Technol., 2020, 33, 285
DOI: 10.2494/photopolymer.33.285

Typ‐I‐Photoinitiator auf der Basis nachhaltiger Kohlenstoffpunkte
Ruiping Li, Hongda Guo, Xiongfei Luo, Qunying Wang, Yulian Pang, Shujun Li, Shouxin Liu, Jian Li, Bernd Strehmel and Zhijun Chen
Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202404454

3D Printing with tuneable degradation: Thiol-ene and thiol-yne containing formulations for biomedical applications
A. Locks, B.J. Bowles, S. Brown, H.C. Hailes and S.T. Hilton
International Journal of Pharmaceutics, 2025, 674, 125432
DOI: 10.1016/j.ijpharm.2025.125432

4D Printing: A Comprehensive Review of Technologies, Materials, Stimuli, Design, and Emerging Applications
Aixiang Ding, Fang Tang and Eben Alsberg
Chem. Rev., 2025, 125, 3663
DOI: 10.1021/acs.chemrev.4c00070

Naturally Derived Photoinitiators for Dental and Biomaterials Applications
Mohamed Mahmoud Abdul-Monem
European Dental Research and Biomaterials Journal, 2020, 1, 72
DOI: 10.1055/s-0040-1721313

Developing high-efficiency photoinitiation systems by Leveraging highly Matched Interplays between photosensitizer and photoinitiator for enhanced energy transfer
Azhu Wang, Xianwei Zhao, Zhiwei Shi, Chunyu Lv, Pei Li, Jun Yu, Han Rao, Haining Chen, Huicong Liu, Weiping Li and Xiaoyu Jiang
European Polymer Journal, 2025, 223, 113669
DOI: 10.1016/j.eurpolymj.2024.113669

Conjugated Carbazole‐Based Schiff Bases as Photoinitiators: From Facile Synthesis to Efficient Two‐Photon Polymerization
Zhiquan Li, Peng Hu, Junzhe Zhu, Yajun Gao, Xiang Xiong and Ren Liu
J. Polym. Sci. Part A: Polym. Chem., 2018, 56, 2692
DOI: 10.1002/pola.29254

Effect of substitution on light-curable properties in diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide: DFT and TD-DFT calculations
Hao Qin, Daoyuan Yang, Jingjing Zhao, Jinyue Leng, Jiaxuan Zhang, Yanyan Zhang, Mingxuan Hao, Junyan Cui and Huiyu Yuan
Materials Today Communications, 2023, 35, 106071
DOI: 10.1016/j.mtcomm.2023.106071

Recent Advances and Challenges in the Design of Organic Photoacid and Photobase Generators for Polymerizations
Nicolas Zivic, Paula K. Kuroishi, Frédéric Dumur, Didier Gigmes, Andrew P. Dove and Haritz Sardon
Angew Chem Int Ed, 2019, 58, 10410
DOI: 10.1002/anie.201810118

Binary Thiol-Acrylate Photopolymerization for the Design of Degradable Acetal-Functionalized Hydrogels
James R. Brown, Jana Herzberger, Glenn Allen Spiering, Emily Wilts, Robert B. Moore and Timothy E. Long
ACS Appl. Polym. Mater., 2023, 5, 1030
DOI: 10.1021/acsapm.2c01978

Stereochemistry-Controlled Mechanical Properties and Degradation in 3D-Printable Photosets
Anissa L. Khalfa, Matthew L. Becker and Andrew P. Dove
J. Am. Chem. Soc., 2021, 143, 17510
DOI: 10.1021/jacs.1c06960

Chemistry in light-induced 3D printing
Alejandra Salas, Marcileia Zanatta, Victor Sans and Ignazio Roppolo
ChemTexts, 2023, 9
DOI: 10.1007/s40828-022-00176-z

3D Printed Polymer Vacuum Insulator
Wenyuan Liu, Yankun Huo, Changfeng Ke, Jun Cheng and Yuewen Guo
IEEE Trans. Dielect. Electr. Insul., 2021, 28, 28
DOI: 10.1109/TDEI.2020.008967

Volatile Organic Chemical Emissions from Standard and “Eco” Resins for Vat Photopolymerization Additive Manufacturing (“3D”) Printers and Potential Mitigation Strategies
Justin P. Miller-Schulze and Nicholas D. Williams
ACS Chem. Health Saf., 2025, 32, 175
DOI: 10.1021/acs.chas.4c00087

Adjustable Thermo-Responsive, Cell-Adhesive Tissue Engineering Scaffolds for Cell Stimulation through Periodic Changes in Culture Temperature
Ketpat Vejjasilpa, Iram Maqsood, Michaela Schulz-Siegmund and Michael C. Hacker
IJMS, 2022, 24, 572
DOI: 10.3390/ijms24010572

Evaluating Benchtop Additive Manufacturing Processes Considering Latest Enhancements in Operational Factors
Antreas Kantaros, Florian Ion Tiberiu Petrescu, Konstantinos Brachos, Theodore Ganetsos and Nicolae Petrescu
Processes, 2024, 12, 2334
DOI: 10.3390/pr12112334

Ammonia‐free natural rubber latex photo‐resin for sustainable 3D printing of highly stretchable and tough elastomers
Oliyad Dibisa, Allen Jonathan Román, Hannah Cabush, Grace O'Brien, Xiao Kuang and Tim A. Osswald
SPE Polymers, 2025, 6
DOI: 10.1002/pls2.70011

Living Polymer Networks Based on a RAFT Cross-Linker: Toward 3D and 4D Printing Applications
Ali Bagheri, Honglei Ling, Chris William Anderson Bainbridge and Jianyong Jin
ACS Appl. Polym. Mater., 2021, 3, 2921
DOI: 10.1021/acsapm.1c00048

Recent Advances in 3D Printing of Photocurable Polymers: Types, Mechanism, and Tissue Engineering Application
Aayushi Randhawa, Sayan Deb Dutta, Keya Ganguly, Dinesh K. Patel, Tejal V. Patil and Ki‐Taek Lim
Macromolecular Bioscience, 2023, 23
DOI: 10.1002/mabi.202200278

Synergistic combination of 4D printing and electroless metallic plating for the fabrication of a highly conductive electrical device
Benjamin Qi Yu Chan, Yi Ting Chong, Shengqin Wang, Coryl Jing Jun Lee, Cally Owh, Fei Wang and FuKe Wang
Chemical Engineering Journal, 2022, 430, 132513
DOI: 10.1016/j.cej.2021.132513

Fast Fabrication of Localized Porous Alumina Patterns with 3D Printed Microdroplet Cell
Muhammad Bilal and Masatoshi Sakairi
J. Electrochem. Soc., 2020, 167, 081501
DOI: 10.1149/1945-7111/ab8877

Synthesis and Characterization of Cardanol-Based Methacrylate Oligomers for Three-Dimensional Printing Resins
Shaoyun Chen, Yongqiang Luo, Yihao Xu, Yanyu Zheng, Xiaoying Liu, Rui Wang, Bo Qu and Dongxian Zhuo
ACS Sustainable Chem. Eng., 2021, 9, 16316
DOI: 10.1021/acssuschemeng.1c05689

Towards safe phosphine oxides photoinitiators with good cytocompatibility for 3D printing of thermoplastics
Loïc Buchon, Jean‐Michel Becht, Laurent Rubatat, Wei Wang, Hua Wei, Pu Xiao and Jacques Lalevee
J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.54694

Vinylsulfonatester: Effiziente Kettenübertragungsreagenzien für verzögerungsfreien 3D‐Druck schlagzäher Photopolymere
Konstanze Seidler, Markus Griesser, Markus Kury, Reghunathan Harikrishna, Peter Dorfinger, Thomas Koch, Anastasiya Svirkova, Martina Marchetti‐Deschmann, Juergen Stampfl, Norbert Moszner, Christian Gorsche and Robert Liska
Angewandte Chemie, 2018, 130, 9305
DOI: 10.1002/ange.201803747

Free-radical polymerization in a droplet with initiation at the interface
D.E. Roshchin, S.A. Patlazhan and A.A. Berlin
European Polymer Journal, 2023, 190, 112002
DOI: 10.1016/j.eurpolymj.2023.112002

Preparation and Characterization of Excellent Performance Photosensitive Resin Suitable for Photocuring 3D Printing
Haiwei Ma, Xianzhe Li, Xin Ding, Chunlei Cao and Jianying Ma
Journal of Polymer Science, 2025, 63, 3456
DOI: 10.1002/pol.20250409

Vanillin-based thiol-ene systems as photoresins for optical 3D printing
Aukse Navaruckiene, Sigita Kasetaite and Jolita Ostrauskaite
RPJ, 2019, 26, 402
DOI: 10.1108/RPJ-03-2019-0076

Disubstituted Aminoanthraquinone-Based Photoinitiators for Free Radical Polymerization and Fast 3D Printing under Visible Light
J. Zhang, K. Launay, N. S. Hill, D. Zhu, N. Cox, J. Langley, J. Lalevée, M. H. Stenzel, M. L. Coote and P. Xiao
Macromolecules, 2018, 51, 10104
DOI: 10.1021/acs.macromol.8b02145

Printability Study of a Conductive Polyaniline/Acrylic Formulation for 3D Printing
Goretti Arias-Ferreiro, Ana Ares-Pernas, Aurora Lasagabáster-Latorre, Nora Aranburu, Gonzalo Guerrica-Echevarria, M. Sonia Dopico-García and María-José Abad
Polymers, 2021, 13, 2068
DOI: 10.3390/polym13132068

Functional 3D printing: Approaches and bioapplications
Gianluca Palmara, Francesca Frascella, Ignazio Roppolo, Annalisa Chiappone and Alessandro Chiadò
Biosensors and Bioelectronics, 2021, 175, 112849
DOI: 10.1016/j.bios.2020.112849

Vat polymerization 3D printing of composite acrylate photopolymer-based coated glass beads
Amirhossein Enayati Gerdroodbar, Hura Alihemmati, Mohsen Zeighami, Mahdi Bodaghi, Abbas Z Kouzani, Behzad Pourabbas and Ali Zolfagharian
Mater. Res. Express, 2023, 10, 085306
DOI: 10.1088/2053-1591/acf1f2

High Throughput Screening of 3D Printable Resins: Adjusting the Surface and Catalytic Properties of Multifunctional Architectures
J. Sebastián Manzano, Hsin Wang and Igor I. Slowing
ACS Appl. Polym. Mater., 2019, 1, 2890
DOI: 10.1021/acsapm.9b00598

Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Jana Herzberger, Justin M. Sirrine, Christopher B. Williams and Timothy E. Long
Progress in Polymer Science, 2019, 97, 101144
DOI: 10.1016/j.progpolymsci.2019.101144

Multi-material vat photopolymerization 3D printing: a review of mechanisms and applications
Saroj Subedi, Siying Liu, Wenbo Wang, S. M. Abu Naser Shovon, Xiangfan Chen and Henry Oliver T. Ware
npj Adv. Manuf., 2024, 1
DOI: 10.1038/s44334-024-00005-w

3D printing of micropatterned stamps with tunable horizontal surface properties
Robert Bail, Su Bin Lee and Dong Hyun Lee
Surface & Interface Analysis, 2023, 55, 217
DOI: 10.1002/sia.7180

Tuning the Mechanical Properties of 3D‐printed Objects by the RAFT Process: From Chain‐Growth to Step‐Growth
Xiaofeng Pan, Jiajia Li, Zhuang Li, Qing Li, Xiangqiang Pan, Zhengbiao Zhang and Jian Zhu
Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202318564

Cleavable Unimolecular Photoinitiators Based on Oxime‐Ester Chemistry for Two‐Photon Three‐Dimensional Printing
Wanwan Qiu, Peng Hu, Junzhe Zhu, Ren Liu, Zhiquan Li, Zhiyong Hu, Qidai Chen, Kurt Dietliker and Robert Liska
ChemPhotoChem, 2019, 3, 1090
DOI: 10.1002/cptc.201900164

Light-Mediated Polymerization Induced by Semiconducting Nanomaterials: State-of-the-Art and Future Perspectives
Yifan Zhu and Eilaf Egap
ACS Polym. Au, 2021, 1, 76
DOI: 10.1021/acspolymersau.1c00014

Recent Advances in Photoredox Catalysts
Frédéric Dumur and Jacques Lalevée
Catalysts, 2023, 14, 26
DOI: 10.3390/catal14010026

Recyclable and Self‐Healing UV‐Curable Polyurethane–Acrylate Coatings With Dynamic Hindered Urea Bonds for Sustainable Protective Applications
Jhu‐Lin You, Yi‐Kuang Li, Kung‐Qian Lu, Shu‐Yi Liao and An‐Sin Guei
J of Applied Polymer Sci, 2026, 143
DOI: 10.1002/app.70398

Tribology behaviour investigation of 3D printed polymers
Muammel M. Hanon, Márk Kovács and László Zsidai
IRASE, 2019, 10, 173
DOI: 10.1556/1848.2019.0021

Combustion characteristics of skeleton polymer reinforced paraffin-wax fuel grain for applications in hybrid rocket motors
Yi Wu, Zixiang Zhang, Qianlong Wang and Ningfei Wang
Combustion and Flame, 2022, 241, 112055
DOI: 10.1016/j.combustflame.2022.112055

Epoxide-functionalized hyperbranched polyethylene and its applications in functional polymer synthesis and hot lithography photopolymer toughening
Vojtěch Musil, Dominik Laa, Anatolij Sokolohorskyj, Robert Liska, Katharina Ehrmann and Jan Merna
Reactive and Functional Polymers, 2025, 216, 106425
DOI: 10.1016/j.reactfunctpolym.2025.106425

Prospect of 3D printing technologies in maintenance of asphalt pavement cracks and potholes
Fangyuan Gong, Xuejiao Cheng, Bingjie Fang, Can Cheng, Yu Liu and Zhanping You
Journal of Cleaner Production, 2023, 397, 136551
DOI: 10.1016/j.jclepro.2023.136551

Recent Advances on Furan-Based Visible Light Photoinitiators of Polymerization
Frédéric Dumur
Catalysts, 2023, 13, 493
DOI: 10.3390/catal13030493

A Material Platform Based on Dissociative CO2-Derived N,O-Acetals for Tunable Degradation of 3D Printable Materials
Marco Caliari, Jacopo Teotonico, Mikel Irigoyen, Anje Mujika, Tommaso Isolabella, Daniele Mantione, Lourdes Irusta, Bruno Grignard, Fernando Vidal, Christophe Detrembleur and Haritz Sardon
J. Am. Chem. Soc., 2025, 147, 30095
DOI: 10.1021/jacs.5c07767

Bioinspired fabrication of 3D-printed composites based on multiscale and interfacial architecture of conch shells
Qiushi Wang, Cong Li, Xianke Li, Hao Wu, Zhaohua Lin, Changyi Liu, Shunbo Wang, Suqian Ma and Yunhong Liang
Acta Biomaterialia, 2025, 202, 352
DOI: 10.1016/j.actbio.2025.07.016

Tris‐benzo[cd]indole Cyanine Enables the NIR‐photosensitized Radical and Thiol‐ene Polymerizations at 940 nm
Christine Elian, Benjamin Mourot, Camil Benbouziyane, Jean‐Pierre Malval, Sonia Lajnef, Fabienne Peyrot, Florian Massuyeau, Olivier Siri, Denis Jacquemin, Simon Pascal and Davy‐Louis Versace
Angewandte Chemie, 2023, 135
DOI: 10.1002/ange.202305963

Remarkable Versatility of Silane/Iodonium Salt as Redox Free Radical, Cationic, and Photopolymerization Initiators
Dengxia Wang, Florian Szillat, Jean Pierre Fouassier and Jacques Lalevée
Macromolecules, 2019, 52, 5638
DOI: 10.1021/acs.macromol.9b00952

Continuous manufacturing of nanomedicines using 3D-printed microfluidic devices
Aytug Kara, Baris Ongoren, Brayan J. Anaya, Aikaterini Lalatsa and Dolores R. Serrano
Applied Materials Today, 2025, 43, 102672
DOI: 10.1016/j.apmt.2025.102672

Influence of reactive diluent composition on properties and bio-based content of itaconic acid-based additive manufacturing materials
Lazaros Papadopoulos, Lorenzo Pezzana, Natalia Malitowski, Marco Sangermano, Dimitrios N. Bikiaris and Tobias Robert
Discov Appl Sci, 2024, 6
DOI: 10.1007/s42452-024-05926-x

A review on upconversion nanoparticles in biomedical applications via 3D printing, bioprinting, and photocuring techniques
Vishnu Kadabahalli Thammannagowda, Kariyappa Gowda Guddenahalli Shivanna, Stéphane Panier and Prashantha Kalappa
Next Materials, 2025, 9, 101314
DOI: 10.1016/j.nxmate.2025.101314

Design and performance control of slurries for the manufacturing of ceramic cores by stereolithography: A review
Qiaolei Li, Tingting Zhang, Jingjing Liang, Lisa Biasetto, Yizhou Zhou, Paolo Colombo and Jinguo Li
Journal of the European Ceramic Society, 2026, 46, 118322
DOI: 10.1016/j.jeurceramsoc.2026.118322

3D printed solution flow type microdroplet cell for simultaneous area selective anodizing
Muhammad Bilal and Masatoshi Sakairi
Journal of Advanced Research, 2020, 26, 43
DOI: 10.1016/j.jare.2020.06.019

Evaluation of a 3D-printed pipette tip for seeding housefly eggs
G. Rossi, G. Bosch, L. Pisa and D.G.A.B. Oonincx
JIFF, 2022, 8, 753
DOI: 10.3920/JIFF2021.0118

Advancing 3D printed microfluidics with computational methods for sweat analysis
Emre Ece, Kadriye Ölmez, Nedim Hacıosmanoğlu, Maryam Atabay and Fatih Inci
Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06231-5

Biomass-derived Photoresins for Digital Light Processing 3D Printing of Degradable Objects
Haiwang Lai, Marie Le Dot, Jia-feng Chen, Jing Zhang and Pu Xiao
ACS Sustainable Resour. Manage., 2025, 2, 833
DOI: 10.1021/acssusresmgt.5c00094

Development of a Reactive Force Field for Simulating Photoinitiated Acrylate Polymerization
Yihan Huang, John J. Karnes, Maxim Shusteff and Roland Faller
J. Phys. Chem. B, 2023, 127, 5094
DOI: 10.1021/acs.jpcb.2c09117

3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Jinhua Li, Chengtie Wu, Paul K. Chu and Michael Gelinsky
Materials Science and Engineering: R: Reports, 2020, 140, 100543
DOI: 10.1016/j.mser.2020.100543

Manufacturing 3D Biomimetic Tissue: A Strategy Involving the Integration of Electrospun Nanofibers with a 3D‐Printed Framework for Enhanced Tissue Regeneration
Aayushi Randhawa, Sayan Deb Dutta, Keya Ganguly, Tejal V. Patil and Ki‐Taek Lim
Small, 2024, 20
DOI: 10.1002/smll.202309269