Review of high-performance sustainable polymers in additive manufacturing

Gloria Chyr and Joseph M. DeSimone

Green Chem., 2023, 25, 453
DOI: 10.1039/D2GC03474C

Sustainable advances in SLA/DLP 3D printing materials and processes

Erin M. Maines, Mayuri K. Porwal, Christopher J. Ellison and Theresa M. Reineke

Green Chem., 2021, 23, 6863
DOI: 10.1039/D1GC01489G

The reaction of activated esters with epoxides for self-curable, highly flexible, A2B2- and A3B3-type epoxy compounds

Chien-Han Chen, Chia-Min Lin, Tzong-Yuan Juang, Mahdi M. Abu-Omar and Ching-Hsuan Lin

Polym. Chem., 2019, 10, 3983
DOI: 10.1039/C9PY00377K

Thermal annealing effects on the mechanical properties of bio-based 3D printed thermosets

Karen P. Cortés-Guzmán, Ankit R. Parikh, Marissa L. Sparacin, Rebecca M. Johnson, Lauren Adegoke, Melanie Ecker, Walter E. Voit and Ronald A. Smaldone

Polym. Chem., 2023, 14, 2697
DOI: 10.1039/D3PY00200D

Photocurable modification of inorganic fillers and their application in photopolymers for 3D printing

Yang Liu, Yucong Lin, Ting Jiao, Gang Lu and Jie Liu

Polym. Chem., 2019, 10, 6350
DOI: 10.1039/C9PY01445D

Recent developments towards performance-enhancing lignin-based polymers

Garrett F. Bass and Thomas H. Epps

Polym. Chem., 2021, 12, 4130
DOI: 10.1039/D1PY00694K

A new safranin based three-component photoinitiating system for high resolution and low shrinkage printed parts via digital light processing

Atefeh Nejadebrahim, Morteza Ebrahimi, Xavier Allonas, Céline Croutxé-Barghorn, Christian Ley and Boris Métral

RSC Adv., 2019, 9, 39709
DOI: 10.1039/C9RA09170J

High-performance 3D printing UV-curable resins derived from soybean oil and gallic acid

Guoqiang Zhu, Jinshuai Zhang, Jia Huang, Xixi Yu, Jianwen Cheng, Qianqian Shang, Yun Hu, Chengguo Liu, Lihong Hu and Yonghong Zhou

Green Chem., 2021, 23, 5911
DOI: 10.1039/D1GC01934A

A reconfigurable, healable and recyclable 3D printed orthosis for adolescent idiopathic scoliosis

Xiu-Chong He, Jian-Cheng Lai, Peng-Fei Zheng and Cheng-Hui Li

Mater. Chem. Front., 2024, 8, 3175
DOI: 10.1039/D4QM00275J

Biobased and degradable thiol–ene networks from levoglucosan for sustainable 3D printing

Mayuri K. Porwal, Matthew M. Hausladen, Christopher J. Ellison and Theresa M. Reineke

Green Chem., 2023, 25, 1488
DOI: 10.1039/D2GC04185E

Substituted stilbene-based oxime esters used as highly reactive wavelength-dependent photoinitiators for LED photopolymerization

Shixiong Chen, Ming Jin, Jean-Pierre Malval, Jingming Fu, Fabrice Morlet-Savary, Haiyan Pan and Decheng Wan

Polym. Chem., 2019, 10, 6609
DOI: 10.1039/C9PY01330J

Sustainable Photopolymers in 3D Printing: A Review on Biobased, Biodegradable, and Recyclable Alternatives

Vincent S. D. Voet, Jarno Guit and Katja Loos

Macromol. Rapid Commun., 2021, 42
DOI: 10.1002/marc.202000475

Improving the Performance of Photoactive Terpene-Based Resin Formulations for Light-Based Additive Manufacturing

Viviane Chiaradia, Elena Pensa, Thiago O. Machado and Andrew P. Dove

ACS Sustainable Chem. Eng., 2024, 12, 6904
DOI: 10.1021/acssuschemeng.3c08191

Recent advances in lignin-based 3D printing materials: A mini-review

Zhouyuanye Wan, Hongjie Zhang, Meihong Niu, Yanzhu Guo and Haiming Li

International Journal of Biological Macromolecules, 2023, 253, 126660
DOI: 10.1016/j.ijbiomac.2023.126660

Designing Sustainable Polymers: Lactate Esters for 3D Printing and Upcycling

Pia S. Klee, Clara Vazquez-Martel, Lilliana Florido Martins and Eva Blasco

ACS Appl. Polym. Mater., 2024, 6, 935
DOI: 10.1021/acsapm.3c02497

Frontiers in 3D printing for biobased food packaging

Dhruv Thakur, Mohammed A. Bareen, Achala Gupta, Sampa Saha and Jatindra K. Sahu

Food Sci Biotechnol, 2024
DOI: 10.1007/s10068-024-01770-2

High biorenewable content acrylate photocurable resins for DLP 3D printing

Migle Lebedevaite, Vaidas Talacka and Jolita Ostrauskaite

J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.50233

Aromatics from Lignocellulosic Biomass: A Platform for High-Performance Thermosets

Jignesh S. Mahajan, Robert M. O’Dea, Joanne B. Norris, LaShanda T. J. Korley and Thomas H. Epps

ACS Sustainable Chem. Eng., 2020, 8, 15072
DOI: 10.1021/acssuschemeng.0c04817

Engineering Innovations, Challenges, and Opportunities for Lignocellulosic Biorefineries: Leveraging Biobased Polymer Production

Alison J. Shapiro, Robert M. O'Dea, Sonia C. Li, Jamael C. Ajah, Garrett F. Bass and Thomas H. Epps,

Annual Review of Chemical and Biomolecular Engineering, 2023, 14, 109
DOI: 10.1146/annurev-chembioeng-101121-084152

An Overview on 3D Printing of Structured Porous Materials and Their Applications

Yuanyuan Gao, Jacques Lalevée and Angélique Simon‐Masseron

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300377

Photoinitiated polymerization of methacrylates comprising phenyl moieties

Berran Sanay, Bernd Strehmel and Veronika Strehmel

Journal of Polymer Science, 2020, 58, 3196
DOI: 10.1002/pol.20200483

Thermal and mechanical properties of polymer networks prepared by the thiol-ene reaction of a vanillin/acetone condensate and its related compounds

Risa Ohno, Kaito Sugane and Mitsuhiro Shibata

European Polymer Journal, 2021, 159, 110738
DOI: 10.1016/j.eurpolymj.2021.110738

UV-curing 3D printing of high-performance, recyclable, biobased photosensitive resin enabled by dual-crosslinking networks

Weibing Huang, Zhaoji Zu, Yiming Huang, Hongping Xiang and Xiaoxuan Liu

Additive Manufacturing, 2024, 91, 104352
DOI: 10.1016/j.addma.2024.104352

UV-Light Curing of 3D Printing Inks from Vegetable Oils for Stereolithography

Anda Barkane, Oskars Platnieks, Maksims Jurinovs, Sigita Kasetaite, Jolita Ostrauskaite, Sergejs Gaidukovs and Youssef Habibi

Polymers, 2021, 13, 1195
DOI: 10.3390/polym13081195

Methacrylated wood flour-reinforced “all-wood” derived resin for digital light processing (DLP) 3D printing

Jenevieve Yao and Minna Hakkarainen

Composites Communications, 2023, 38, 101506
DOI: 10.1016/j.coco.2023.101506

Camphoric acid as renewable cyclic building block for bio-based UV-curing polyhexylene itaconate

Rim Ouhichi, Abdelkader Bougarech, Marcel Kluge, Sacha Pérocheau Arnaud, Souhir Abid, Majdi Abid and Tobias Robert

European Polymer Journal, 2021, 151, 110423
DOI: 10.1016/j.eurpolymj.2021.110423

Three‐dimensional chemical reactors: in situ materials synthesis to advance vat photopolymerization

Daryl W Yee and Julia R Greer

Polymer International, 2021, 70, 964
DOI: 10.1002/pi.6165

Synthesis and Characterization of Cardanol-Based Methacrylate Oligomers for Three-Dimensional Printing Resins

Shaoyun Chen, Yongqiang Luo, Yihao Xu, Yanyu Zheng, Xiaoying Liu, Rui Wang, Bo Qu and Dongxian Zhuo

ACS Sustainable Chem. Eng., 2021, 9, 16316
DOI: 10.1021/acssuschemeng.1c05689

Renewable Photopolymers: Transformation of Biomass Resources into Value-Added Products Under Light

H. Lai, J. Zhang and P. Xiao

ACS Sustainable Chem. Eng., 2023, 11, 16365
DOI: 10.1021/acssuschemeng.3c05257

Ring Opening Copolymerization of Four-Dimensional Printed Shape Memory Polyester Photopolymers Using Digital Light Processing

David Merckle, Eric Constant, Zachary Cartwright and Andrew C Weems

Macromolecules, 2021, 54, 2681
DOI: 10.1021/acs.macromol.0c02401

Synergistic strengthening and toughening of 3D printing photosensitive resin by bismaleimide and acrylic liquid-crystal resin

Shaoyun Chen, Lanqin Yu, Shiyu Zhang, Xiaolu Sun, Bo Qu, Rui Wang, Yanyu Zheng, Xiaoying Liu, Wenjie Li, Jianhong Gao and Dongxian Zhuo

Journal of Science: Advanced Materials and Devices, 2023, 8, 100565
DOI: 10.1016/j.jsamd.2023.100565

3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing

Grant Guggenbiller, Scott Brooks, Olivia King, Eric Constant, David Merckle and Andrew C Weems

ACS Appl. Polym. Mater., 2023, 5, 3201
DOI: 10.1021/acsapm.2c02171

Emerging 3D printing technologies for solid oral dosage forms: Processes, materials and analytical tools for real-time assessment

Nobel O. Sierra-Vega, Muhammad Ashraf, Thomas O’Connor, Michael Kopcha, Mathew Di Prima, James Coburn and Ahmed Zidan

International Journal of Pharmaceutics, 2025, 673, 125415
DOI: 10.1016/j.ijpharm.2025.125415

Photocuring of aliphatic-lineal poly(glycerol adipate) with a monomer bearing thiazolium groups as a promising approach for biomedical applications

V. Hevilla, A. Sonseca, C. Echeverría, A. Muñoz-Bonilla and M. Fernández-García

European Polymer Journal, 2023, 186, 111875
DOI: 10.1016/j.eurpolymj.2023.111875

Vanillin-Based Resin for Additive Manufacturing

Alexander W. Bassett, Amy E. Honnig, Claire M. Breyta, Ian C. Dunn, John J. La Scala and Joseph F. Stanzione

ACS Sustainable Chem. Eng., 2020, 8, 5626
DOI: 10.1021/acssuschemeng.0c00159

Furanic (Meth)acrylate Monomers as Sustainable Reactive Diluents for Stereolithography

Ivan Hevus, Prakash Kannaboina, Yiqiu Qian, Jingbo Wu, Melody Johnson, Luke R. Gibbon, John J. La Scala, Chad Ulven, Mukund P. Sibi and Dean C. Webster

ACS Appl. Polym. Mater., 2023, 5, 9659
DOI: 10.1021/acsapm.3c02207

3D printing technology for textiles and fashion

Tanvir Mahady Dip, Ayesha Siddika Emu, Md Nafiul Hassan Nafiz, Puja Kundu, Hasnatur Rahman Rakhi, Abdullah Sayam, Md Akhtarujjman, Mohammad Shoaib, Md Shakil Ahmed, Swimi Tabassum Ushno, Abdullah Ibn Asheque, Enamul Hasnat, Mohammad Abbas Uddin and Abu Sadat Muhammad Sayem

Textile Progress, 2020, 52, 167
DOI: 10.1080/00405167.2021.1978223

Biobased Photopolymer Resin for 3D Printing Containing Dynamic Imine Bonds for Fast Reprocessability

Jules Stouten, Geraldine H. M. Schnelting, Jerzy Hul, Nick Sijstermans, Kylian Janssen, Tinashe Darikwa, Chongnan Ye, Katja Loos, Vincent S. D. Voet and Katrien V. Bernaerts

ACS Appl. Mater. Interfaces, 2023, 15, 27110
DOI: 10.1021/acsami.3c01669

Additive Manufacturing of Bovine Serum Albumin-Based Hydrogels and Bioplastics

Patrick T. Smith, Benjaporn Narupai, Jonathan H. Tsui, S. Cem Millik, Ryan T. Shafranek, Deok-Ho Kim and Alshakim Nelson

Biomacromolecules, 2020, 21, 484
DOI: 10.1021/acs.biomac.9b01236

Dissociative Carbamate Exchange Anneals 3D Printed Acrylates

Leslie S. Hamachi, Daniel A. Rau, Clay B. Arrington, Daylan T. Sheppard, David J. Fortman, Timothy E. Long, Christopher B. Williams and William R. Dichtel

ACS Appl. Mater. Interfaces, 2021, 13, 38680
DOI: 10.1021/acsami.1c09373

100th Anniversary of Macromolecular Science Viewpoint: Macromolecular Materials for Additive Manufacturing

Benjaporn Narupai and Alshakim Nelson

ACS Macro Lett., 2020, 9, 627
DOI: 10.1021/acsmacrolett.0c00200

Thermal responsive photopolymerization 3D printed shape memory polymers enhanced by heat transfer media

Shuochen Yang, Tingjun Chen, Zesen Bu, Xiaohang Tuo, Yumei Gong and Jing Guo

J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.53514

High-Performance Biobased Electronic Packaging Coatings Enabled by Unlocking the Photo-Cross-Linking Capacity of Lignin-Derived Epoxy Resin

Keyu Lian, Shengdu Yang, Dianheng Lu, Wei Tang and Junhua Zhang

ACS Appl. Polym. Mater., 2025, 7, 445
DOI: 10.1021/acsapm.4c03420

TG-FTIR-QMS analysis of more environmentally friendly poly(geranyl methacrylate)-co-poly(cyclohexyl methacrylate) copolymers

Marta Worzakowska

Polymer Degradation and Stability, 2022, 206, 110196
DOI: 10.1016/j.polymdegradstab.2022.110196

The Liberalization of Microfluidics: Form 2 Benchtop 3D Printing as an Affordable Alternative to Established Manufacturing Methods

Benjamin Heidt, Renato Rogosic, Silvio Bonni, Juliette Passariello-Jansen, David Dimech, Joseph W. Lowdon, Rocio Arreguin-Campos, Erik Steen Redeker, Kasper Eersels, Hanne Diliën, Bart van Grinsven and Thomas J. Cleij

Physica Status Solidi (a), 2020, 217
DOI: 10.1002/pssa.201900935

Superior Properties through Feedstock Development for Vat Photopolymerization Additive Manufacturing of High-Performance Biobased Feedstocks

Anthony M. Clay, Joshua R. Mitchell, Zachary R. Boelter and John J. La Scala

Materials, 2021, 14, 4843
DOI: 10.3390/ma14174843

Evolution of Self‐Assembled Lignin Nanostructure into Dendritic Fiber in Aqueous Biphasic Photocurable Resin for DLP‐Printing

Luyao Wang, Ruijie Wu, Qingbo Wang, Oskar Backman, Patrik Eklund, Xiaoju Wang and Chunlin Xu

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202315679

Vanillin Acrylate-Based Resins for Optical 3D Printing

Aukse Navaruckiene, Edvinas Skliutas, Sigita Kasetaite, Sima Rekštytė, Vita Raudoniene, Danguole Bridziuviene, Mangirdas Malinauskas and Jolita Ostrauskaite

Polymers, 2020, 12, 397
DOI: 10.3390/polym12020397

Lignin: A multi-faceted role/function in 3D printing inks

Jian Yang, Xingye An, Bin Lu, Haibing Cao, Zhengbai Cheng, Xin Tong, Hongbin Liu and Yonghao Ni

International Journal of Biological Macromolecules, 2024, 267, 131364
DOI: 10.1016/j.ijbiomac.2024.131364

Multiacrylated Cyclodextrin: A Bio‐Derived Photocurable Macromer for VAT 3D Printing

Andrea Cosola, Riccardo Conti, Hansjörg Grützmacher, Marco Sangermano, Ignazio Roppolo, Candido Fabrizio Pirri and Annalisa Chiappone

Macro Materials & Eng, 2020, 305
DOI: 10.1002/mame.202000350

Straightforward Enzymatic Methacrylation of Poly(Glycerol Adipate) for Potential Applications as UV Curing Systems

Víctor Hevilla, Águeda Sonseca and Marta Fernández-García

Polymers, 2023, 15, 3050
DOI: 10.3390/polym15143050

Continuous Sustainable Production of Biobased Multicomponent Enhanced Resin for SLA 3D Printing

Vojtěch Jašek, Otakar Bartoš, Veronika Lavrinčíková, Jan Fučík, Silvestr Figalla, Eliška Kameníková and Radek Přikryl

ACS Mater. Au, 2025, 5, 580
DOI: 10.1021/acsmaterialsau.5c00014

Additive Manufacture of Dynamic Thiol–ene Networks Incorporating Anhydride-Derived Reversible Thioester Links

Maciej Podgórski, Sijia Huang and Christopher N. Bowman

ACS Appl. Mater. Interfaces, 2021, 13, 12789
DOI: 10.1021/acsami.0c18979

Flexible Materials for High-Resolution 3D Printing of Microfluidic Devices with Integrated Droplet Size Regulation

Niclas Weigel, Max J. Männel and Julian Thiele

ACS Appl. Mater. Interfaces, 2021, 13, 31086
DOI: 10.1021/acsami.1c05547

3D printing of lignin-based supramolecular topological shape-morphing architectures with high strength, toughness, resolution, and fatigue resistance

Jian Yang, Xingye An, Lingyu Yin, Bin Lu, Xiaofeng Lyu, Zhengbai Cheng, Gangyuan Pan, Hongbin Liu and Yonghao Ni

Additive Manufacturing, 2024, 95, 104519
DOI: 10.1016/j.addma.2024.104519

Eugenol-Based Siloxane Acrylates for Ultraviolet-Curable Coatings and 3D Printing

Jieyuan Zheng, Yuquan Cai, Xianwei Zhang, Jintao Wan and Hong Fan

ACS Appl. Polym. Mater., 2022, 4, 929
DOI: 10.1021/acsapm.1c01405

Photocured Poly(Mannitol Sebacate) with Functional Methacrylic Monomer: Analysis of Physical, Chemical, and Biological Properties

Víctor Hevilla, Águeda Sonseca, Coro Echeverría, Alexandra Muñoz-Bonilla and Marta Fernández-García

Polymers, 2023, 15, 1561
DOI: 10.3390/polym15061561

Fats and Oils as a Sustainable Source of Photopolymerizable Monomers

Alberto Spessa, Franca Castiglione, Alessandra Vitale, Roberta Bongiovanni and Sara Dalle Vacche

Polymers, 2024, 16, 3570
DOI: 10.3390/polym16243570

100th Anniversary of Macromolecular Science Viewpoint: Polymers from Lignocellulosic Biomass. Current Challenges and Future Opportunities

Robert M. O’Dea, Jordan A. Willie and Thomas H. Epps

ACS Macro Lett., 2020, 9, 476
DOI: 10.1021/acsmacrolett.0c00024

Selective Reactivity of Myrcene for Vat Photopolymerization 3D Printing and Postfabrication Surface Modification

Andrew C. Weems, Kayla R. Delle Chiaie, Rachel Yee and Andrew P. Dove

Biomacromolecules, 2020, 21, 163
DOI: 10.1021/acs.biomac.9b01125

Green ink revolution: Pioneering eco‐friendly 3D printing with vegetable oil‐derived inks

Anirudh Thorbole, Chandan Bodhak, Pranabesh Sahu and Ram K. Gupta

Polymer Engineering & Sci, 2024, 64, 5879
DOI: 10.1002/pen.26974

Development of Photosensitive Natural Rubber as a Mechanical Modifier for Ultraviolet-Curable Resin Applied in Digital Light Processing-Based Three-Dimensional Printing Technology

Wasan Tessanan, Philippe Daniel and Pranee Phinyocheep

ACS Omega, 2021, 6, 14838
DOI: 10.1021/acsomega.1c00418

Sustainable Light‐Assisted 3D Printing of Bio‐Based Microwave‐Functionalized Gallic Acid

Rossella Sesia, Matilde Porcarello, Minna Hakkarainen, Sara Ferraris, Silvia Spriano and Marco Sangermano

Macro Chemistry & Physics, 2025, 226
DOI: 10.1002/macp.202400181

Sustainable Materials and Chemical Processes for Additive Manufacturing

Eva Sanchez-Rexach, Trevor G. Johnston, Coralie Jehanno, Haritz Sardon and Alshakim Nelson

Chem. Mater., 2020, 32, 7105
DOI: 10.1021/acs.chemmater.0c02008

Cell-Laden Gelatin Methacryloyl Bioink for the Fabrication of Z-Stacked Hydrogel Scaffolds for Tissue Engineering

Jeong Wook Seo, Joon Ho Moon, Goo Jang, Woo Kyung Jung, Yong Ho Park, Kun Taek Park, Su Ryon Shin, Yu-Shik Hwang and Hojae Bae

Polymers, 2020, 12, 3027
DOI: 10.3390/polym12123027

3D-Printed Carbons with Improved Properties and Oxidation Resistance

Pauline Blyweert, Vincent Nicolas, Vanessa Fierro and Alain Celzard

ACS Sustainable Chem. Eng., 2023, 11, 8055
DOI: 10.1021/acssuschemeng.3c00152

4D Photopolymers Derived From Ring-Opening Copolymerization of Cyclic Anhydrides and Limonene Oxide

Scott Brooks, David Merckle and Andrew C Weems

ACS Sustainable Chem. Eng., 2023, 11, 10252
DOI: 10.1021/acssuschemeng.3c00377

High-performance 4D printing of shape memory polymers with interpenetrating networks from hybrid biobased benzoxazine with acrylic resin blends

Nuttinan Boonnao, Panuwat Luengrojanakul, Reza Gholami, Cheol-Hee Ahn, Panagiotis Karagiannidis and Sarawut Rimdusit

Applied Materials Today, 2025, 44, 102774
DOI: 10.1016/j.apmt.2025.102774

A Review on Lignin-Derived Resins for Sustainable Vat Polymerization in Additive Manufacturing

O’Brien Zakumi Obed, Taofik Olatunde Uthman and Serdar Surgun

GEET, 2025, 4
DOI: 10.5772/geet.20240068

Nanomaterials for 3D Printing of Polymers via Stereolithography: Concept, Technologies, and Applications

Raphael Palucci Rosa and Giuseppe Rosace

Macro Materials & Eng, 2021, 306
DOI: 10.1002/mame.202100345

Sustainable polymers

Amar K. Mohanty, Feng Wu, Rosica Mincheva, Minna Hakkarainen, Jean-Marie Raquez, Deborah F. Mielewski, Ramani Narayan, Anil N. Netravali and Manjusri Misra

Nat Rev Methods Primers, 2022, 2
DOI: 10.1038/s43586-022-00124-8

High-biobased-content UV-curable oligomers derived from tung oil and citric acid: Microwave-assisted synthesis and properties

Jinshuai Zhang, Qianqian Shang, Yun Hu, Fei Zhang, Jia Huang, Jianyu Lu, Jianwen Cheng, Chengguo Liu, Lihong Hu, Hongcheng Miao, Yuanyuan Chen, Tian Huang and Yonghong Zhou

European Polymer Journal, 2020, 140, 109997
DOI: 10.1016/j.eurpolymj.2020.109997

Demonstration of Ultraviolet μLED Array With Novel Electrical Contact Etch Mask

Matthew Seitz, Matthew Hartensveld, Bryan Melanson, Jacob Boisvere and Jing Zhang

IEEE J. Quantum Electron., 2023, 59, 1
DOI: 10.1109/JQE.2023.3310968

A kinetic and mechanistic study of copper-based catalysts in the ARGET-ATRP of multifunctional natural molecules: The case of methacrylated eugenol

Aniello Vittore, Orlando Santoro, Mirko Candida, Stefano Vaghi, Stefania Pragliola, Massimo Mella and Lorella Izzo

Polymer, 2025, 324, 128228
DOI: 10.1016/j.polymer.2025.128228

Defining the Macromolecules of Tomorrow through Synergistic Sustainable Polymer Research

Farihah M. Haque, Jacob S. A. Ishibashi, Claire A. L. Lidston, Huiling Shao, Frank S. Bates, Alice B. Chang, Geoffrey W. Coates, Christopher J. Cramer, Paul J. Dauenhauer, William R. Dichtel, Christopher J. Ellison, Ethan A. Gormong, Leslie S. Hamachi, Thomas R. Hoye, Mengyuan Jin, Julia A. Kalow, Hee Joong Kim, Gaurav Kumar, Christopher J. LaSalle, Stephanie Liffland, Bryce M. Lipinski, Yutong Pang, Riffat Parveen, Xiayu Peng, Yanay Popowski, Emily A. Prebihalo, Yernaidu Reddi, Theresa M. Reineke, Daylan T. Sheppard, Jeremy L. Swartz, William B. Tolman, Bess Vlaisavljevich, Jane Wissinger, Shu Xu and Marc A. Hillmyer

Chem. Rev., 2022, 122, 6322
DOI: 10.1021/acs.chemrev.1c00173

Synthesis of tung oil-based vinyl ester resin and its application for anti-corrosion coatings

Shaoheng Yang, Heng Fang, Hai Li, Fangning Shen, Xudong Chen, Yang Hu and Zhuohong Yang

Progress in Organic Coatings, 2022, 170, 106967
DOI: 10.1016/j.porgcoat.2022.106967

Photo-curing 3D printing of micro-scale bamboo fibers reinforced palm oil-based thermosets composites

Yuchao Wu, Chao Li, Tingting Chen, Renhui Qiu and Wendi Liu

Composites Part A: Applied Science and Manufacturing, 2022, 152, 106676
DOI: 10.1016/j.compositesa.2021.106676

Synthesis of novel acrylic liquid-crystal resin and its in-situ enhancement in light-curing 3D printing performance

Shaoyun Chen, Yalu Duan, Wenqiang Hua, Qilang Lin, Bo Qu, Rui Wang, Yanyu Zheng, Xiaoying Liu, Wenjie Li and Dongxian Zhuo

Journal of Materials Research and Technology, 2022, 17, 2158
DOI: 10.1016/j.jmrt.2022.01.159

Vat Photopolymerization Additive Manufacturing of Tough, Fully Recyclable Thermosets

Alexa S. Kuenstler, Juan J. Hernandez, Marianela Trujillo-Lemon, Alexander Osterbaan and Christopher N. Bowman

ACS Appl. Mater. Interfaces, 2023, 15, 11111
DOI: 10.1021/acsami.2c22081

Lignin nanoparticle-enhanced biobased resins for digital light processing 3D printing: Towards high resolution and tunable mechanical properties

Jenevieve Yao, Mohammad Morsali, Adrian Moreno, Mika H. Sipponen and Minna Hakkarainen

European Polymer Journal, 2023, 194, 112146
DOI: 10.1016/j.eurpolymj.2023.112146

3D Printing of a Dual-Curing Resin with Cationic Curable Vegetable Oil

Yanyan Cui, Junlai Yang, Dehua Lei and Jiahui Su

Ind. Eng. Chem. Res., 2020, 59, 11381
DOI: 10.1021/acs.iecr.0c01507

Ambient-pressure lignin valorization to high-performance polymers by intensified reductive catalytic deconstruction

Robert M. O’Dea, Paula A. Pranda, Yuqing Luo, Alice Amitrano, Elvis O. Ebikade, Eric R. Gottlieb, Olumoye Ajao, Marzouk Benali, Dionisios G. Vlachos, Marianthi Ierapetritou and Thomas H. Epps

Sci. Adv., 2022, 8
DOI: 10.1126/sciadv.abj7523

Methacrylated Bovine Serum Albumin and Tannic Acid Composite Materials for Three-Dimensional Printing Tough and Mechanically Functional Parts

Patrick T. Smith, Gokce Altin, S. Cem Millik, Benjaporn Narupai, Cameron Sietz, James O. Park and Alshakim Nelson

ACS Appl. Mater. Interfaces, 2022, 14, 21418
DOI: 10.1021/acsami.2c01446

Latest Trends in Sustainable Polymeric Food Packaging Films

Edilson G. S. Silva, Sara Cardoso, Ana F. Bettencourt and Isabel A. C. Ribeiro

Foods, 2022, 12, 168
DOI: 10.3390/foods12010168

Study on photocrosslinking self-plasticized polyvinyl alcohol photosensitive film

Yuying Liu, Baolong Xue, Xuejing Liu, Shuheng Liang, Jingjing Nie, Yulin Zhou, Lianhui Chen, Pengqing Liu, Shengchang Zhang, Jiadeng Zhu and Mengjin Jiang

Progress in Organic Coatings, 2024, 189, 108203
DOI: 10.1016/j.porgcoat.2023.108203

Microwave-functionalized natural tannic acid as an anticorrosive UV-curable coating

Rossella Sesia, Paula Pou I Rodríguez, Massimo Calovi, Minna Hakkarainen, Stefano Rossi, Sara Ferraris, Silvia Spriano and Marco Sangermano

Polymer, 2024, 315, 127824
DOI: 10.1016/j.polymer.2024.127824

Self-Healing, Antibacterial, and 3D-Printable Polymerizable Deep Eutectic Solvents Derived from Tannic Acid

Guoqiang Zhu, Jinshuai Zhang, Jia Huang, Xixi Yu, Jianwen Cheng, Qianqian Shang, Yun Hu, Chengguo Liu, Meng Zhang, Lihong Hu and Yonghong Zhou

ACS Sustainable Chem. Eng., 2022, 10, 7954
DOI: 10.1021/acssuschemeng.2c01328

Thiol-ene-based degradable 3D printed network from bio resource derived monomers ethyl-lactate and isosorbide

Shibam Pal and S.K. Asha

European Polymer Journal, 2024, 205, 112761
DOI: 10.1016/j.eurpolymj.2024.112761

Digital Light Processing (DLP) 3D Printing of Caprolactone Copolymers with Tailored Properties through Crystallinity

Gianluca Bartolini Torres, Smiljana Stefanovic, Bo Li and Andreas Heise

ACS Appl. Polym. Mater., 2024, 6, 11241
DOI: 10.1021/acsapm.4c01772

Castor oil‐based UV‐curable polyurethane acrylate resins for digital light processing (DLP) 3D printing technology

Haresh Bhanushali, Siddhesh Mestry and S. T. Mhaske

J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.53817

Eugenol, a Promising Building Block for Biobased Polymers with Cutting-Edge Properties

Roberto Morales-Cerrada, Samantha Molina-Gutierrez, Patrick Lacroix-Desmazes and Sylvain Caillol

Biomacromolecules, 2021, 22, 3625
DOI: 10.1021/acs.biomac.1c00837

Three-Dimensional Printing Fully Biobased Heat-Resistant Photoactive Acrylates from Aliphatic Biomass

Jia-Tao Miao, Shuqiang Peng, Meiying Ge, Yuewei Li, Jie Zhong, Zixiang Weng, Lixin Wu and Longhui Zheng

ACS Sustainable Chem. Eng., 2020, 8, 9415
DOI: 10.1021/acssuschemeng.0c02168

A Bio-Based Resin for a Multi-Scale Optical 3D Printing

Edvinas Skliutas, Migle Lebedevaite, Sigita Kasetaite, Sima Rekštytė, Saulius Lileikis, Jolita Ostrauskaite and Mangirdas Malinauskas

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-66618-1

Influence of photoinitiator and temperature on photocross-linking kinetics of acrylated epoxidized soybean oil and properties of the resulting polymers

Migle Lebedevaite and Jolita Ostrauskaite

Industrial Crops and Products, 2021, 161, 113210
DOI: 10.1016/j.indcrop.2020.113210

4D printed stereolithography printed plant‐based sustainable polymers: Preliminary investigation and optimization

Mohd. Danish, P. Vijay Anirudh, C. Karunakaran, Vasudevan Rajamohan, Arun Tom Mathew, Krzysztof Koziol, Vijay Kumar Thakur, C. Kannan and A. S. S. Balan

J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.50903

A Review on Styrene Substitutes in Thermosets and Their Composites

Yuchao Wu, Mingen Fei, Renhui Qiu, Wendi Liu and Jianhui Qiu

Polymers, 2019, 11, 1815
DOI: 10.3390/polym11111815

Effect of modified calcium sulphate whiskers on free-radical/cationic hybrid photopolymers for 3D printing

Ting Jiao, Yucong Lin, Yang Liu, Jie Liu and Gang Lu

Mater. Res. Express, 2020, 7, 015334
DOI: 10.1088/2053-1591/ab6898

Phosphorus‐Containing Biobased Dimethacrylate Resin with Imine Linkages

Ozge Ozukanar, Emrah Çakmakçi and Volkan Kumbaraci

Macro Materials & Eng, 2025, 310
DOI: 10.1002/mame.202400322

TG/DSC/FTIR/QMS analysis of environmentally friendly poly(citronellyl methacrylate)-co-poly(benzyl methacrylate) copolymers

Marta Worzakowska

J Mater Sci, 2023, 58, 2005
DOI: 10.1007/s10853-022-08089-5

Postfabrication Functionalization of 4D-Printed Polycarbonate Photopolymer Scaffolds

Scott L. Brooks, Maria C. Arno, Andrew P. Dove and Andrew C. Weems

ACS Appl. Polym. Mater., 2022, 4, 5670
DOI: 10.1021/acsapm.2c00648

Photo Amphoteric Compound Generators for Environmentally-friendly Materials

Takuya Shigemune, Takuya Marumo, Nanaho Tsuchiya, Takafumi Nonaka and Shigeru Takahara

J. Photopol. Sci. Technol., 2020, 33, 439
DOI: 10.2494/photopolymer.33.439

3D Printing of Thiol‐Yne Photoresins through Visible Light Photoredox Catalysis

Yimei Wu, M. Cather Simpson and Jianyong Jin

ChemistrySelect, 2022, 7
DOI: 10.1002/slct.202200319

Emulsion-Free 3D Printing of Inherently Porous Molecularly Imprinted Polymers with Tailored Macroscopic Geometries

Benedikt Keitel, Alex D. Batista, Simon Schimana, Boris Mizaikoff and Mehmet Dinc

ACS Appl. Polym. Mater., 2024, 6, 3690
DOI: 10.1021/acsapm.3c02744

Thiol‐X Chemistry: A Skeleton Key Unlocking Advanced Polymers in Additive Manufacturing

James Anthony Dicks and Chris Woolard

Macro Materials & Eng, 2025
DOI: 10.1002/mame.202400445

Reflection on the Matyjaszewski Lab Webinar Series and the Rise of Webinars in Polymer Chemistry

Francesca Lorandi, Sushil Lathwal, Michael R. Martinez, Sajjad Dadashi-Silab, Grzegorz Szczepaniak and Julia Cuthbert

ACS Macro Lett., 2021, 10, 54
DOI: 10.1021/acsmacrolett.0c00806

UV-Curable Bio-Based Polymers Derived from Industrial Pulp and Paper Processes

Lorenzo Pezzana, Eva Malmström, Mats Johansson and Marco Sangermano

Polymers, 2021, 13, 1530
DOI: 10.3390/polym13091530

DLP 3D Printing of Levoglucosenone‐Based Monomers: Exploiting Thiol‐ene Chemistry for Bio‐Based Polymeric Resins

Lorenzo Pezzana, Sami Fadlallah, German Giri, Corentin Archimbaud, Ignazio Roppolo, Florent Allais and Marco Sangermano

ChemSusChem, 2024, 17
DOI: 10.1002/cssc.202301828

Exceptional Mechanical Properties and Heat Resistance of Photocurable Bismaleimide Ink for 3D Printing

Wenqiang Hua, Qilang Lin, Bo Qu, Yanyu Zheng, Xiaoying Liu, Wenjie Li, Xiaojing Zhao, Shaoyun Chen and Dongxian Zhuo

Materials, 2021, 14, 1708
DOI: 10.3390/ma14071708

Natural and Naturally Derived Photoinitiating Systems for Light-Based 3D Printing

Clara Vazquez-Martel, Philipp Mainik and Eva Blasco

Organic Materials, 2022, 4, 281
DOI: 10.1055/a-1976-0453

3D printing of lignin: Challenges, opportunities and roads onward

L.‐S. Ebers, Aditi Arya, C. C. Bowland, W. G. Glasser, S. C. Chmely, A. K. Naskar and M.‐P. Laborie

Biopolymers, 2021, 112
DOI: 10.1002/bip.23431

Novel monomers for photopolymer networks

H. Lai, X. Peng, L. Li, D. Zhu and P. Xiao

Progress in Polymer Science, 2022, 128, 101529
DOI: 10.1016/j.progpolymsci.2022.101529

Radical Photopolymerization Using 1,4-Dihydropyrrolo[3,2-b]pyrrole Derivatives Prepared via One-Pot Synthesis

Yuanyuan Xu, Yu Chen, Xuguang Liu and Song Xue

ACS Omega, 2021, 6, 20902
DOI: 10.1021/acsomega.1c02338