Formation mechanism of thermally expandable microspheres of PMMA encapsulating NaHCO3 and ethanol via thermally induced phase separation

Shuqian Zhou, Zhengfa Zhou, ChenRan Ji, Weibing Xu, Haihong Ma, Fengmei Ren and Xuefan Wang

RSC Adv., 2017, 7, 50603
DOI: 10.1039/C7RA10132E

Gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics

Nileshkumar Dubey, Juliana S. Ribeiro, Zhaocheng Zhang, Jinping Xu, Jessica A. Ferreira, Liu Qu, Ling Mei, J. Christopher Fenno, Anna Schwendeman, Steven P. Schwendeman, Jacques E. Nör and Marco C. Bottino

J. Mater. Chem. B, 2023, 11, 3823
DOI: 10.1039/D2TB02788G

Recent advancement in polymer/halloysite nanotube nanocomposites for biomedical applications

Intan Najwa Humaira Mohamed Haneef, Norhashimah Mohd Shaffiar, Yose Fachmi Buys, Sharifah Imihezri Syed Shaharuddin, Abdul Malek Abdul Hamid and Khusnun Widiyati

J Biomed Mater Res, 2022, 110, 2574
DOI: 10.1002/jbm.b.35105

Impact of In Vitro Degradation on the Properties of Samples Produced by Additive Production from PLA/PHB-Based Material and Ceramics

Alena Findrik Balogová, Marianna Trebuňová, Darina Bačenková, Miroslav Kohan, Radovan Hudák, Teodor Tóth, Marek Schnitzer and Jozef Živčák

Polymers, 2022, 14, 5441
DOI: 10.3390/polym14245441

Chitosan || Biobran/PVA || Chitosan/PVA tri-layered nanofiber scaffold: A biphasic release system with physicochemical properties conducive to skin tissue engineering

Mamdooh Ghoneum, El-Refaie Kenawy, Hesham M.A. Soliman, Mohammed S. Abdel-Moaty and Ahmed A. El-Shanshory

Carbohydrate Polymer Technologies and Applications, 2025, 11, 100878
DOI: 10.1016/j.carpta.2025.100878

Load-bearing PTMC-beta tri-calcium phosphate and dexamethasone biphasic composite microsphere scaffolds for bone tissue engineering

Jian He, Yu Zhang, Xiaoyi Liu, liJun Peng, Huiling Li, Chengdong Xiong and Lifang Zhang

Materials Letters, 2020, 260, 126939
DOI: 10.1016/j.matlet.2019.126939

Enhancing the biomechanical response of 3D-printed polylactic acid scaffolds with heat treatment

Shrushti Maheshwari, Archana Singh, Koushik Chatterjee, Zafar Alam and Sarthak S. Singh

emergent mater., 2025
DOI: 10.1007/s42247-025-01155-z

In vitro and in vivo evaluation of polylactic acid-based composite with tricalcium phosphate microsphere for enhanced biodegradability and osseointegration

Da Yong Shin, Min-Ho Kang, In-Gu Kang, Hyoun-Ee Kim and Seol-Ha Jeong

J Biomater Appl, 2018, 32, 1360
DOI: 10.1177/0885328218763660

A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds

M. Sai Bhargava Reddy, Deepalekshmi Ponnamma, Rajan Choudhary and Kishor Kumar Sadasivuni

Polymers, 2021, 13, 1105
DOI: 10.3390/polym13071105

Advancing Cardiac Tissue Engineering With Smart Biopolymers: From Fabrication Strategies to 4D Printing and Organoids

Harsath Ram Govindan Radhakrishnan, Pandian Chithamparam, Senthil Muthu Kumar Thiagamani, Azhaguchamy Muthukumaran and Nadir Ayrilmis

Polymers for Advanced Techs, 2025, 36
DOI: 10.1002/pat.70280

An innovative approach towards 3D-printed scaffolds for the next generation of tissue-engineered vascular grafts

Fatemeh Kabirian, Bartek Ditkowski, Ali Zamanian, Ruth Heying and Masoud Mozafari

Materials Today: Proceedings, 2018, 5, 15586
DOI: 10.1016/j.matpr.2018.04.167

In Vitro Degradation of Specimens Produced from PLA/PHB by Additive Manufacturing in Simulated Conditions

Alena Findrik Balogová, Marianna Trebuňová, Gabriela Ižaríková, Ľuboš Kaščák, Lukáš Mitrík, Jana Klímová, Jozef Feranc, Marcel Modrák, Radovan Hudák and Jozef Živčák

Polymers, 2021, 13, 1542
DOI: 10.3390/polym13101542

Improvement of Mechanical and Biological Properties of PLA/HNT Scaffolds Fabricated by Foam Injection Molding: Skin Layer Effect and Laser Texturing

M. Eryildiz, M. Altan and S. Odabas

International Polymer Processing, 2021, 36, 564
DOI: 10.1515/ipp-2020-4090

Effect of ZnO reinforcement on the compressive properties, in vitro bioactivity, biodegradability and cytocompatibility of bone scaffold developed from bovine bone-derived HAp and PMMA

Emon Barua, Ashish B. Deoghare, Sushovan Chatterjee and Pranav Sapkal

Ceramics International, 2019, 45, 20331
DOI: 10.1016/j.ceramint.2019.07.006

Biodegradable polymeric conduits: Platform materials for guided nerve regeneration and vascular tissue engineering

Uzma Hayat, Ali Raza, Muhammad Bilal, Hafiz M.N. Iqbal and Jin-Ye Wang

Journal of Drug Delivery Science and Technology, 2022, 67, 103014
DOI: 10.1016/j.jddst.2021.103014

3D printed bioresorbable scaffolds for articular cartilage tissue engineering: a comparative study between neat polycaprolactone (PCL) and poly(lactide-b-ethylene glycol) (PLA-PEG) block copolymer

Uzuri Urtaza, Olatz Guaresti, Izar Gorroñogoitia, Ana Zubiarrain-Laserna, Emma Muiños-López, Froilán Granero-Moltó, JM Lamo de Espinosa, Tania López-Martinez, Manuel Mazo, Felipe Prósper, Ane Miren Zaldua and Jon Anakabe

Biomed. Mater., 2022, 17, 045028
DOI: 10.1088/1748-605X/ac78b7

Chitosan–Cellulose Multifunctional Hydrogel Beads: Design, Characterization and Evaluation of Cytocompatibility with Breast Adenocarcinoma and Osteoblast Cells

Poonam Trivedi, Tiina Saloranta-Simell, Uroš Maver, Lidija Gradišnik, Neeraj Prabhakar, Jan-Henrik Smått, Tamilselvan Mohan, Martin Gericke, Thomas Heinze and Pedro Fardim

Bioengineering, 2018, 5, 3
DOI: 10.3390/bioengineering5010003

Cell laden alginate-keratin based composite microcapsules containing bioactive glass for tissue engineering applications

Supachai Reakasame, Daniela Trapani, Rainer Detsch and Aldo R. Boccaccini

J Mater Sci: Mater Med, 2018, 29
DOI: 10.1007/s10856-018-6195-5

Mechanical Properties and In Vitro Evaluation of Thermoplastic Polyurethane and Polylactic Acid Blend for Fabrication of 3D Filaments for Tracheal Tissue Engineering

Asmak Abdul Samat, Zuratul Ain Abdul Hamid, Mariatti Jaafar and Badrul Hisham Yahaya

Polymers, 2021, 13, 3087
DOI: 10.3390/polym13183087

Selective enzymatic degradation and porous morphology of poly(butylene succinate)/poly(lactic acid) blends

Ke Shi, Zhenhui Bai, Tingting Su and Zhanyong Wang

International Journal of Biological Macromolecules, 2019, 126, 436
DOI: 10.1016/j.ijbiomac.2018.12.168

Polylactide-Based Porous Materials: Synthesis, Hydrolytic Degradation Features, and Application Areas

E. S. Trofimchuk, V. V. Potseleev, M. A. Khavpachev, M. A. Moskvina and N. I. Nikonorova

Polym. Sci. Ser. C, 2021, 63, 199
DOI: 10.1134/S1811238221020107

3D-printed platform multi-loaded with bioactive, magnetic nanoparticles and an antibiotic for re-growing bone tissue

Ana S. Saraiva, Isabel A.C. Ribeiro, Maria H. Fernandes, Ana Cláudia Cerdeira, Bruno J.C. Vieira, João Carlos Waerenborgh, Laura C.J. Pereira, Ricardo Cláudio, Maria João Carmezim, Pedro Gomes, Lídia M. Gonçalves, Catarina F. Santos and Ana F. Bettencourt

International Journal of Pharmaceutics, 2021, 593, 120097
DOI: 10.1016/j.ijpharm.2020.120097

3D Printed Hierarchical Porous Poly(ε-caprolactone) Scaffolds from Pickering High Internal Phase Emulsion Templating

Sagnik Ghosh, Anilkumar Yadav, Sweety Rani, Sonam Takkar, Ritu Kulshreshtha, Bhanu Nandan and Rajiv K. Srivastava

Langmuir, 2023, 39, 1927
DOI: 10.1021/acs.langmuir.2c02936

Biomimetic Hierarchical Structuring of PLA by Ultra-Short Laser Pulses for Processing of Tissue Engineered Matrices: Study of Cellular and Antibacterial Behavior

Albena Daskalova, Liliya Angelova, Emil Filipov, Dante Aceti, Rosica Mincheva, Xavier Carrete, Halima Kerdjoudj, Marie Dubus, Julie Chevrier, Anton Trifonov and Ivan Buchvarov

Polymers, 2021, 13, 2577
DOI: 10.3390/polym13152577

Hydroxyapatite and Whitlockite Incorporated Cellulose Reinforced Poly-Caprolactone (PCL): Biomimetic Nanocomposites for Bone Tissue Engineering Applications

Laraib Abbas, Farzana Nazir, Asma Gulzar, Laiba Maryam, Asima Tayyeb and Mudassir Iqbal

J Polym Environ, 2023, 31, 2093
DOI: 10.1007/s10924-022-02717-6

Porous poly(l-lactic acid) nanocomposite scaffolds with functionalized TiO2 nanoparticles: properties, cytocompatibility and drug release capability

Aleksandra Buzarovska, Sorina Dinescu, Leona Chitoiu and Marieta Costache

J Mater Sci, 2018, 53, 11151
DOI: 10.1007/s10853-018-2415-0

In vitro degradation analysis and mechanical characterization of PLA-CF composites prepared by fused filament fabrication technique for bio-medical applications

Krishnakumar S and Senthilvelan T

Journal of Thermoplastic Composite Materials, 2024, 37, 2702
DOI: 10.1177/08927057231219928

Preparation of 3D printed calcium sulfate filled PLA scaffolds with improved mechanical and degradation properties

Mohammad Aftab Alam Ansari, Prashant Kumar Jain and Himansu Sekhar Nanda

Journal of Biomaterials Science, Polymer Edition, 2023, 34, 1408
DOI: 10.1080/09205063.2023.2167374

In vitro performance of a nanobiocomposite scaffold containing boron-modified bioactive glass nanoparticles for dentin regeneration

Reza Moonesi Rad, Engin Pazarçeviren, Elif Ece Akgün, Zafer Evis, Dilek Keskin, Sıla Şahin and Ayşen Tezcaner

J Biomater Appl, 2019, 33, 834
DOI: 10.1177/0885328218812487

Production and antioxidant activity of electrospun polylactic acid (PLA) nanofibrous mats containing naringenin (NAR) for potential wound healing applications

Serap AYAZ SEYHAN, Zeynep ERDAG , Sumeyye CESUR and Dilek BILGIC ALKAYA

Rev.Roum.Chim., 2024, 69, 119
DOI: 10.33224/rrch.2024.69.3-4.02

Lanthanum Oxide Nanoparticles Reinforced Collagen ƙ‐Carrageenan Hydroxyapatite Biocomposite as Angio‐Osteogenic Biomaterial for In Vivo Osseointegration and Bone Repair

Vinu Vijayan, Sreelekshmi Sreekumar, Kannoth Madappurakkal Ahina, Rachita Lakra and Manikantan Syamala Kiran

Advanced Biology, 2023, 7
DOI: 10.1002/adbi.202300039

Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare

Zhaojun Jia, Xiaoxue Xu, Donghui Zhu and Yufeng Zheng

Progress in Materials Science, 2023, 134, 101072
DOI: 10.1016/j.pmatsci.2023.101072

Extracellular-matrix Composite Bioink for 3D bioprinting and molding of small diameter vascular grafts

Kishor R. Tardalkar, Leena R. Chaudhari, Mrunal N. Damle, Akshay A. Kawale, Nilesh C. Bhamare, Jeevitaa R. Kshersagar, Tanvee S. Kulkarni and Meghnad G. Joshi

Bioprinting, 2023, 34, e00300
DOI: 10.1016/j.bprint.2023.e00300

Cellulose acetate-gelatin-coated boron-bioactive glass biocomposite scaffolds for bone tissue engineering

Reza Moonesi Rad, Ammar Z Alshemary, Zafer Evis, Dilek Keskin and Ayşen Tezcaner

Biomed. Mater., 2020, 15, 065009
DOI: 10.1088/1748-605X/ab8d47

Fabrication of robust poly l-lactic acid/cyclic olefinic copolymer (PLLA/COC) blends: study of physical properties, structure, and cytocompatibility for bone tissue engineering

Farzana Nazir, Mudassir Iqbal, Ahmad Nawaz Khan, Muhammad Mazhar and Zakir Hussain

Journal of Materials Research and Technology, 2021, 13, 1732
DOI: 10.1016/j.jmrt.2021.05.073

Advancing glioblastoma research: A comparative study of drug response in novel 3D pHEMA-gelatin cryogel and traditional 2D models

Meryem Damla Özdemir Alkış, Gözde Baydemir Peşint and Dilek Göktürk

J. Mater. Res., 2025, 40, 1805
DOI: 10.1557/s43578-025-01613-8

Adhesion force analysis for prevention of particle resuspension in multiplexed inertial coalescence filters

Rawand M. Rasheed, John M. Lentz, Irfan M. Zobayed, Zhen Liu, Anoop Rajappan, Damian Gonzalez and Daniel J. Preston

Aerosol Science and Technology, 2024, 58, 276
DOI: 10.1080/02786826.2024.2305822

Emulsion Electrospun Polylactide/Sodium Alginate Nanofibrous Membranes with Rhinacanthus nasutus Extract for Natural Antibacterial Function

Autchara Pangon, Supaphorn Kaewwong, Kamonchanok Srithai and Suttinun Phongtamrug

Fibers Polym, 2024, 25, 843
DOI: 10.1007/s12221-023-00462-8

Fabrication of bioactive silk composite meshes for hernia repair and guided soft tissue remodeling: In silico, in vitro and in vivo models

Natasha Bokhari, Asif Ali, Abida Yasmeen, Rawaiz Khan, Sajjad Haider and Faiza Sharif

Applied Materials Today, 2024, 38, 102261
DOI: 10.1016/j.apmt.2024.102261

Evaluation of In Vitro and Electrochemical Degradation of Additively Manufactured Polymeric Scaffolds

Siddhant Gade, Sunita Yadav, Shashikant Vagge and Raju Panchal

J. of Materi Eng and Perform, 2025
DOI: 10.1007/s11665-025-11344-w

Preparation of porous materials by selective enzymatic degradation: effect of in vitro degradation and in vivo compatibility

Ke Shi, Qinqin Ma, Tingting Su and Zhanyong Wang

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-63892-x

Effect of different nanoparticles on physicochemical and biological properties of emulsion templated poly (ɛ-caprolactone) scaffolds

Anilkumar Yadav, Meenal Agrawal, Sonam Takkar, Sagnik Ghosh, Ritu Kulshreshtha, Bhanu Nandan and Rajiv K. Srivastava

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2025, 705, 135597
DOI: 10.1016/j.colsurfa.2024.135597

Hydrogel scaffold encapsulating MSC-Exos and ZIF-8 promotes bone regeneration via coordinating osteogenesis and immunomodulation

Yunhui Si, Xiaorong Li, Shuao Dong, Xueqin Gao, Yuetong Zhu, Linzhen Mo, Zhiwei Wang, Shuhan Wang and Chao Zhang

Bioactive Materials, 2025, 54, 329
DOI: 10.1016/j.bioactmat.2025.08.026

Additively Manufactured Magnesium-Based Bio-Implants and their Challenges

Manisha Behera, Devadas Bhat Panemangalore and Rajashekhara Shabadi

Trans Indian Natl. Acad. Eng., 2021, 6, 917
DOI: 10.1007/s41403-021-00241-y

Physico-Mechanical and Biological Analysis of Composite Bone Scaffold Developed from Catla catla Fish Scale Derived Hydroxyapatite for Bone Tissue Engineering

Payel Deb, Sumit Das Lala, Emon Barua and Ashish B. Deoghare

Arab J Sci Eng, 2024, 49, 27
DOI: 10.1007/s13369-023-07872-z

Development of bone scaffold using Puntius conchonius fish scale derived hydroxyapatite: Physico-mechanical and bioactivity evaluations

Payel Deb, Emon Barua, Ashish B. Deoghare and Sumit Das Lala

Ceramics International, 2019, 45, 10004
DOI: 10.1016/j.ceramint.2019.02.044

Efficient engineering of human auricular cartilage through mesenchymal stem cell chaperoning

Xue Dong, Carly Askinas, Jongkil Kim, John E. Sherman, Lawrence J. Bonassar and Jason A. Spector

J Tissue Eng Regen Med, 2022, 16, 825
DOI: 10.1002/term.3332

Collagen‐cellulose‐poly(l‐lactide) scaffold by electrospinning and plasma‐assisting fabrication for bone tissue engineering applications

Zulka Ziblim, Boontharika Thapsukhon, Vachira Choommongkol, Dheerawan Boonyawan, Kewalin Inthanon, Orawan Khantamat and Jetsada Ruangsuriya

Plasma Processes & Polymers, 2024, 21
DOI: 10.1002/ppap.202300209

Micro and nano plastics release from a single absorbable suture into simulated body fluid

Yunhong Shi, Dunzhu Li, Christopher Hill, Luming Yang, Emmet D. Sheerin, Rekha Pilliadugula, Jing Jing Wang, John Boland and Liwen Xiao

Journal of Hazardous Materials, 2024, 466, 133559
DOI: 10.1016/j.jhazmat.2024.133559

Three dimensional spongy fibroin scaffolds containing keratin/vanillin particles as an antibacterial skin tissue engineering scaffold

Abdollah Zakeri-Siavashani, Mohsen Chamanara, Ehsan Nassireslami, Mahdi Shiri, Mohsen Hoseini-Ahmadabadi and Babak Paknejad

International Journal of Polymeric Materials and Polymeric Biomaterials, 2022, 71, 220
DOI: 10.1080/00914037.2020.1817021

Influence of Pore Geometry on the Compressive Strength and Cell–Materials Interaction of 3D Printed PLA Scaffolds

Mohammad Aftab Alam Ansari, Prashant Kumar Jain and Himansu Sekhar Nanda

Polymer-Plastics Technology and Materials, 2025, 64, 1407
DOI: 10.1080/25740881.2025.2463571

The Proliferative Effect of PLA Scaffold Coated with Gelatin Nanofibers/Shilajit Extract on Osteoblast-Like MG63 Cells

Sayed Mohammad Mousavi Khattat, Melika Tavira, Saeideh Salehi, Parisa Imeni, Arezoo Khosravi, Atefeh Zarepour and Ali Zarrabi

BioNanoSci., 2025, 15
DOI: 10.1007/s12668-025-02022-1

Development of hybrid scaffold with biomimetic 3D architecture for bone regeneration

Priya Vashisth and Jayesh R Bellare

Nanomedicine: Nanotechnology, Biology and Medicine, 2018, 14, 1325
DOI: 10.1016/j.nano.2018.03.011

Mechanical Behavior of 3D-Printed Schwarz Diamond-Structured Scaffolds for Tissue Engineering Applications

R. Agarwal, S. Malhotra, V. Gupta and V. Jain

Strength Mater, 2024, 56, 774
DOI: 10.1007/s11223-024-00690-0

Exploring PLA/TPU blends in pellet-based printing for multifunctional applications: Blending and interfacial properties

Guo Dong Goh, Kin Keong Wong, Wei Qi Jaw, Raveen Gobi, Muthu Vignesh Vellayappan, Yi Jin Joel Goh, Guo Liang Goh, Hang Li Seet, Wai Yee Yeong and Mui Ling Sharon Nai

Materials Science and Engineering: R: Reports, 2025, 164, 100981
DOI: 10.1016/j.mser.2025.100981

Morphological Evaluation of PLA/Soybean Oil Epoxidized Acrylate Three-Dimensional Scaffold in Bone Tissue Engineering

Mahmood Hameed Majeed and Nabeel Kadhem Abd Alsaheb

Journal of Renewable Materials, 2022, 10, 2391
DOI: 10.32604/jrm.2022.019887

Surface-modified deproteinized human demineralized tooth matrix for bone regeneration: physicochemical characterization and osteoblast cell biocompatibility

Natwara Chokwattananuwat and Srisurang Suttapreyasri

Regenerative Biomaterials, 2024, 11
DOI: 10.1093/rb/rbae030

Candidate Scaffolds for the Treatment of Stress Urinary Incontinence: A Narrative Review

Ilaha Isali, Narmina Khanmammadova, Cosku Ozcelik, Thomas R. Wong and Daniel Shen

Neurourology and Urodynamics, 2025, 44, 1351
DOI: 10.1002/nau.70095

Unveiling the potential of biomaterials and their synergistic fusion in tissue engineering

Eva Sanchez Armengol, Nathalie Hock, Sila Saribal, Dennis To, Simona Summonte, Florina Veider, Gergely Kali, Andreas Bernkop-Schnürch and Flavia Laffleur

European Journal of Pharmaceutical Sciences, 2024, 196, 106761
DOI: 10.1016/j.ejps.2024.106761

Mechanical Properties of 3D Printed PLA Scaffolds for Bone Regeneration

Paula Kundreckaitė, Andžela Šešok, Rimantas Stonkus, Gediminas Gaidulis, Eliza Romańczuk-Ruszuk and Jolanta Pauk

Acta Mechanica et Automatica, 2024, 18, 682
DOI: 10.2478/ama-2024-0072

Detection of Limbal Stem Cells Adhered to Melt Electrospun Silk Fibroin and Gelatin-Modified Polylactic Acid Scaffolds

Emilija Zdraveva, Krešo Bendelja, Luka Bočkor, Tamara Dolenec and Budimir Mijović

Polymers, 2023, 15, 777
DOI: 10.3390/polym15030777

Three-Dimensional Disassemblable Scaffolds for Breast Reconstruction

Viktoriia Kiseleva, Aida Bagdasarian, Polina Vishnyakova, Andrey Elchaninov, Victoria Karyagina, Valeriy Rodionov, Timur Fatkhudinov and Gennady Sukhikh

Polymers, 2025, 17, 2036
DOI: 10.3390/polym17152036

Fabrication of PLLA/C3S Composite Membrane for the Prevention of Bone Cement Leakage

Tsai-Hsueh Leu, Yang Wei, Yi-Shi Hwua, Xiao-Juan Huang, Jung-Tang Huang and Ren-Jei Chung

Polymers, 2019, 11, 1971
DOI: 10.3390/polym11121971

3D printed poly(lactic acid) scaffolds modified with chitosan and hydroxyapatite for bone repair applications

Muhammad Anwaar Nazeer, Ozgun Can Onder, Ilkem Sevgili, Emel Yilgor, Ibrahim Halil Kavakli and Iskender Yilgor

Materials Today Communications, 2020, 25, 101515
DOI: 10.1016/j.mtcomm.2020.101515

Degradation rate and weight loss analysis for freeze-dried, decellularized, and deproteinized bovine bone scaffolds

Ramadhan Pramudya Vidarta, David Buntoro Kamadjaja, Coen Pramono Danudiningrat, Muhammad Subhan Amir, Andra Rizqiawan, Anita Yuliati and Darmawan Darwis

Dent. J., 2025, 58, 23
DOI: 10.20473/j.djmkg.v58.i1.p23-29

Fabrication of Microstructured Polylactide Films by Templating Techniques

V. I. Kulikouskaya and I. G. Chyshankou

Theor Exp Chem, 2021, 57, 303
DOI: 10.1007/s11237-021-09699-x

In Vitro Characterization of Poly(Lactic Acid)/ Poly(Hydroxybutyrate)/ Thermoplastic Starch Blends for Tissue Engineering Application

Martina Culenova, Ivana Birova, Pavol Alexy, Paulina Galfiova, Andreas Nicodemou, Barbora Moncmanova, Roderik Plavec, Katarina Tomanova, Premysl Mencik, Stanislav Ziaran and Lubos Danisovic

Cell Transplant, 2021, 30
DOI: 10.1177/09636897211021003