Barrier effect of coal bottom ash-based geopolymers on soil contaminated by heavy metals

Yiqie Dong, Min Zhou, Yuwei Xiang, Sha Wan, He Li and Haobo Hou

RSC Adv., 2019, 9, 28695
DOI: 10.1039/C9RA05542H

Fly ash geopolymer as a coating material for controlled-release fertilizer based on granulated urea

Rashidah Mohamed Hamidi, Ahmer Ali Siyal, Tero Luukkonen, Rashid M. Shamsuddin and Muhammad Moniruzzaman

RSC Adv., 2022, 12, 33187
DOI: 10.1039/D2RA06056F

Heat evolution of alkali-activated materials: A review on influence factors

Rosnita Mohamed, Rafiza Abd Razak, Mohd Mustafa Al Bakri Abdullah, Shayfull Zamree Abd Abd Rahim, Long Yuan-Li, Subaer, Andrei Victor Sandu and Jerzy J. Wysłocki

Construction and Building Materials, 2022, 314, 125651
DOI: 10.1016/j.conbuildmat.2021.125651

Influence of different sources of coal gangue used as aluminosilicate powder on the mechanical properties and microstructure of alkali-activated cement

B. J. Frasson, R. C.A. Pinto and J. C. Rocha

Mater. constr., 2019, 69, e199
DOI: 10.3989/mc.2019.12618

Reaction, structure and properties of eco-friendly geopolymer cement derived from mechanically activated pumice

Roland Szabó, Ferenc Kristály, Sándor Nagy, Rashmi Singla, Gábor Mucsi and Sanjay Kumar

Ceramics International, 2023, 49, 6756
DOI: 10.1016/j.ceramint.2022.10.204

Improvement of the bearing capacity of lateritic gravel by a geopolymer binder: road construction in tropical countries

Joseph Bikoun Mousi, Rolande Aurelie Tchouateu Kamwa, Juvenal Giogetti Deutou Nemaleu, Sylvain Tome, Martine Gérard, Marie-Annie Etoh, Claudia Pamella Manou Oyong and Jacques Etame

Innov. Infrastruct. Solut., 2024, 9
DOI: 10.1007/s41062-024-01575-6

Comparison of ternary and dual combined waste-derived alkali activators on the durability of volcanic ash-based geopolymers

Yanjin Zheng, Feng Rao, Lang Yang and Shuiping Zhong

Cement and Concrete Composites, 2023, 136, 104886
DOI: 10.1016/j.cemconcomp.2022.104886

Pre-treatment of volcanic tuff for use in high volume cement replacement

Ayman Ababneh, Faris Matalkah and Ruba Aqel

Journal of Sustainable Cement-Based Materials, 2024, 13, 243
DOI: 10.1080/21650373.2023.2264284

Relations between structural characteristics and compressive strength in volcanic ash based one–part geopolymer systems

Refika Çetintaş and Sezen Soyer-Uzun

Journal of Building Engineering, 2018, 20, 130
DOI: 10.1016/j.jobe.2018.07.011

Recent Advances in Geopolymer Technology. A Potential Eco-Friendly Solution in the Construction Materials Industry: A Review

Matteo Sambucci, Abbas Sibai and Marco Valente

J. Compos. Sci., 2021, 5, 109
DOI: 10.3390/jcs5040109

Incorporation of activated bauxite to enhance engineering properties and microstructure of volcanic ash geopolymer mortar composites

Léonel N. Tchadjié, Stephen O. Ekolu, Harry Quainoo and Paul Tematio

Journal of Building Engineering, 2021, 41, 102384
DOI: 10.1016/j.jobe.2021.102384

Volcanic rock powder residues as precursors for the synthesis of adsorbents and potential application in the removal of dyes and metals from water

Diovani L. Rossatto, Matias S. Netto, Glaydson S. Reis, Luis F. O. Silva and Guilherme L. Dotto

Environ Sci Pollut Res, 2022, 29, 25685
DOI: 10.1007/s11356-021-17749-z

Modification of volcanic ash for enhanced removal of malachite green: a complete batch adsorption study

M. S. Manzar, M. Zubair, M. Alshabib, A. H. Khan, E. G. Alhajri, F. Alakhras, M. Nawaz, J. A. S. Odeh, E. Çevik, D. S. P. Franco and J. Georgin

Int. J. Environ. Sci. Technol., 2025, 22, 5665
DOI: 10.1007/s13762-024-05976-z

Utilization of waste Cappadocia earth as a natural pozzolan in alkali activation: A parametric study

Serife Ozata, Busra Akturk and Nabi Yuzer

Construction and Building Materials, 2022, 329, 127192
DOI: 10.1016/j.conbuildmat.2022.127192

Mineralogical evolution of raw materials transformed to geopolymer materials: A review

Sylvain Tome, Achile Nana, Hervé K. Tchakouté, Jadambaa Temuujin and Claus H. Rüscher

Ceramics International, 2024, 50, 35855
DOI: 10.1016/j.ceramint.2024.07.024

Mechanical activation of fly ash and its influence on micro and nano-structural behaviour of resulting geopolymers

Sanjay Kumar, Gábor Mucsi, Ferenc Kristály and Péter Pekker

Advanced Powder Technology, 2017, 28, 805
DOI: 10.1016/j.apt.2016.11.027

Hot-pressed geopolymer

Navid Ranjbar, Mohammad Mehrali, Mahmoud R. Maheri and Mehdi Mehrali

Cement and Concrete Research, 2017, 100, 14
DOI: 10.1016/j.cemconres.2017.05.010

The effect of marble powder on physico‐mechanical and microstructural properties of kaolin‐based geopolymer pastes

Mehmet Kaya, Fuat Köksal, Muhammed Bayram, Mehrab Nodehi, Osman Gencel and Togay Ozbakkaloglu

Structural Concrete, 2023, 24, 6485
DOI: 10.1002/suco.202201010

Improving the pozzolanic reactivity of clay, marl and obsidian through mechanochemical or thermal activation

Vahiddin Alperen Baki, Xinyuan Ke, Andrew Heath, Juliana Calabria-Holley and Cemalettin Terzi

Mater Struct, 2024, 57
DOI: 10.1617/s11527-023-02280-z

Characterization and Leachability Behaviour of Geopolymer Cement Synthesised from Municipal Solid Waste Incinerator Fly Ash and Volcanic Ash Blends

Sylvain Tome, Marie-Annie Etoh, Jacques Etame and Kumar Sanjay

Recycling, 2018, 3, 50
DOI: 10.3390/recycling3040050

Synthesis of a two-part geopolymer from red mud and silica fume

Arup Kumar Mandal

J Met Mater Miner, 2021, 31, 10
DOI: 10.55713/jmmm.v31i2.1004

Utilizing of Magnetized Water in Enhancing of Volcanic Concrete Characteristics

Mostafa M. Keshta, Mohamed M. Yousry Elshikh, Mohamed Abd Elrahman and Osama Youssf

J. Compos. Sci., 2022, 6, 320
DOI: 10.3390/jcs6100320

One-part alkali-activated materials: A review

Tero Luukkonen, Zahra Abdollahnejad, Juho Yliniemi, Paivo Kinnunen and Mirja Illikainen

Cement and Concrete Research, 2018, 103, 21
DOI: 10.1016/j.cemconres.2017.10.001

The effect of various environmental conditions on stabilization/solidification (S/S) of oil-contaminated soil using alkaline activation of granulated blast furnace slag (GBFS)

Mahyar Arabani and Hamed Haghsheno

Construction and Building Materials, 2023, 409, 134022
DOI: 10.1016/j.conbuildmat.2023.134022

Critical methods of geopolymer feedstocks activation for suitable industrial applications

Oluyemi Kehinde, David J. Hughes and Emeka H. Amalu

Heliyon, 2024, 10, e29771
DOI: 10.1016/j.heliyon.2024.e29771

Optimization and characterization of the ternary blended iron rich natural binder concrete system

C.S. Belarmin Xavier and A. Abdul Rahim

Construction and Building Materials, 2023, 363, 129838
DOI: 10.1016/j.conbuildmat.2022.129838

Natural volcanic pozzolans as an available raw material for alkali-activated materials in the foreseeable future: A review

Rafael Andres Robayo-Salazar and Ruby Mejía de Gutiérrez

Construction and Building Materials, 2018, 189, 109
DOI: 10.1016/j.conbuildmat.2018.08.174

Dissolution mechanism of fly ash to quantify the reactive aluminosilicates in geopolymerisation

Carsten Kuenzel and Navid Ranjbar

Resources, Conservation and Recycling, 2019, 150, 104421
DOI: 10.1016/j.resconrec.2019.104421

Influence of mechanochemical activation on the rheological, fresh and mechanical properties of one-part geopolymer grout

Mukhtar Hamid Abed, Israa Sabbar Abbas and Hanifi Canakci

Advances in Cement Research, 2023, 35, 96
DOI: 10.1680/jadcr.21.00205

Reaction mechanisms of alkali-activated materials

Markssuel Teixeira Marvila, Afonso Rangel Garcez de Azevedo and Carlos Maurício Fontes Vieira

Rev. IBRACON Estrut. Mater., 2021, 14
DOI: 10.1590/s1983-41952021000300009

Advanced processing of high Ca fly ash for enhanced reactivity and improved high value-added application possibilities

Mária Ambrus and Gábor Mucsi

Case Studies in Construction Materials, 2023, 18, e02214
DOI: 10.1016/j.cscm.2023.e02214

Enhancing the reactivity of aluminosilicate materials toward geopolymer synthesis

L. N. Tchadjie and S. O. Ekolu

J Mater Sci, 2018, 53, 4709
DOI: 10.1007/s10853-017-1907-7

Preparation of one-part alkali-activated nickel slag binder using an optimal ball milling process

Xuefang Wang, Wenda Wu, Lingling Zhang, Lifang Fu and Xianpeng Li

Construction and Building Materials, 2022, 322, 125902
DOI: 10.1016/j.conbuildmat.2021.125902

Immobilizatiaon of heavy metals in municipal solid waste incineration fly ash with red mud-coal gangue

Xian Zhou, Ting Zhang, Sha Wan, Bo Hu, Jun Tong, Hui Sun, Yuchi Chen, Jinfeng Zhang and Haobo Hou

J Mater Cycles Waste Manag, 2020, 22, 1953
DOI: 10.1007/s10163-020-01082-7

Volcanic ash-based geopolymer cements/concretes: the current state of the art and perspectives

Jean Noël Yankwa Djobo, Antoine Elimbi, Hervé Kouamo Tchakouté and Sanjay Kumar

Environ Sci Pollut Res, 2017, 24, 4433
DOI: 10.1007/s11356-016-8230-8

Mechanical Performance, Phase Evolution and Microstructure of Natural Feldspathic Solid Solutions Consolidated Via Alkali Activation: Effect of NaOH Concentration

Achile Nana, Sylvain Tomé, Sybilline Claudelle Djadock Anensong, Paul Venyite, Jean Noel Yankwa Djobo, Jean Ngouné, Elie Kamseu, Maria Chiara Bignozzi and Cristina Leonelli

Silicon, 2022, 14, 4107
DOI: 10.1007/s12633-021-01193-2

Role of particle size on the mechanical and microstructural properties of fly ash-based geopolymer

Dipankar Das

Interactions, 2024, 245
DOI: 10.1007/s10751-024-02117-3

Rational utilization of volcanic ashes based on factors affecting their alkaline activation

B.I. Djon Li Ndjock, Antoine Elimbi and Martin Cyr

Journal of Non-Crystalline Solids, 2017, 463, 31
DOI: 10.1016/j.jnoncrysol.2017.02.024

Solubility of Precursors and Carbonation of Waterglass-Free Geopolymers

N. Werling, F. Dehn, F. Krause, A. Steudel, R. Schuhmann and K. Emmerich

Clays and clay miner., 2020, 68, 524
DOI: 10.1007/s42860-020-00096-4

Effect of silicate modulus on the setting, mechanical strength and microstructure of iron-rich aluminosilicate (laterite) based-geopolymer cured at room temperature

Cyriaque Rodrigue Kaze, Jean Noel Yankwa Djobo, Achile Nana, Herve Kouamo Tchakoute, Elie Kamseu, Uphie Chinje Melo, Cristina Leonelli and Hubert Rahier

Ceramics International, 2018, 44, 21442
DOI: 10.1016/j.ceramint.2018.08.205

Removal of Cu(II) from wastewater by using mechanochemically activated carbonate-based tailings through chemical precipitation

Bowen Xiong, Tingting Zhang, Yunliang Zhao, Tong Wen, Qiwu Zhang, Shenxu Bao and Shaoxian Song

Environ Sci Pollut Res, 2019, 26, 35198
DOI: 10.1007/s11356-019-06636-3

Mechanical and chemical properties of metakaolin‐based geopolymer exposed to elevated temperature

Tianyi Hua, Ouli Fu, Parvaneh Kheirkhah Barzoki and Yasser Gowayed

J Am Ceram Soc., 2023, 106, 4921
DOI: 10.1111/jace.19134

A review on geopolymer in potential coating application: Materials, preparation and basic properties

Chenhui Jiang, Aiying Wang, Xufan Bao, Tongyuan Ni and Jin Ling

Journal of Building Engineering, 2020, 32, 101734
DOI: 10.1016/j.jobe.2020.101734

Comparison of red mud and coal gangue blended geopolymers synthesized through thermal activation and mechanical grinding preactivation

JunJun Geng, Min Zhou, Yixin Li, Yuchi Chen, Yi Han, Sha Wan, Xian Zhou and Haobo Hou

Construction and Building Materials, 2017, 153, 185
DOI: 10.1016/j.conbuildmat.2017.07.045

A review on alkali-activated binders: Materials composition and fresh properties of concrete

Md Manjur A. Elahi, Md. Maruf Hossain, Md Rezaul Karim, Muhammad Fauzi Mohd Zain and Christopher Shearer

Construction and Building Materials, 2020, 260, 119788
DOI: 10.1016/j.conbuildmat.2020.119788

Lightweight composite from fly ash geopolymer and glass foam

Ferenc Kristály, Roland Szabó, Ferenc Mádai, Ákos Debreczeni and Gábor Mucsi

Journal of Sustainable Cement-Based Materials, 2021, 10, 1
DOI: 10.1080/21650373.2020.1742246

Synergic effect of fly ash and calcium aluminate cement on the properties of pumice-based geopolymer mortar

Cemal Karaaslan, Engin Yener, Tamer Bağatur, Rıza Polat, Rüstem Gül and Mehmet Hakkı Alma

Construction and Building Materials, 2022, 345, 128397
DOI: 10.1016/j.conbuildmat.2022.128397

Potentiality of the Use of Pyroclastic Volcanic Residues in the Production of Alkali Activated Material

Germana Barone, Claudio Finocchiaro, Isabella Lancellotti, Cristina Leonelli, Paolo Mazzoleni, Caterina Sgarlata and Antonio Stroscio

Waste Biomass Valor, 2021, 12, 1075
DOI: 10.1007/s12649-020-01004-6

Preparation and characterization of metakaolin-based geopolymer membrane supports by facile pressed one-part route

Alessandro Filipponi, Giulia Masi, Serena Bandini and Maria Chiara Bignozzi

Ceramics International, 2023, 49, 6834
DOI: 10.1016/j.ceramint.2022.10.233

Elucidation on alkali activation of slag with various solid-to-liquid ratios via heat evolution

Rosnita Mohamed, Rafiza Abd Razak, Mohd Mustafa Al Bakri Abdullah, Shayfull Zamree Abd Rahim, Nurul Aida Mohd Mortar, Jitrin Chaiprapa, Somchai Tancharakorn, Md Azree Othuman Mydin and Petrica Vizureanu

Journal of Building Engineering, 2024, 84, 108639
DOI: 10.1016/j.jobe.2024.108639

Recent advances in blended alkali-activated cements: a review

Nailia R. Rakhimova

European Journal of Environmental and Civil Engineering, 2022, 26, 4596
DOI: 10.1080/19648189.2020.1858170

Identification and characterization of tephra for geopolymer precursor

F R Kautsar, D J Ilham, T B Prasetyo, Juniarti and D Fiantis

IOP Conf. Ser.: Earth Environ. Sci., 2024, 1306, 012018
DOI: 10.1088/1755-1315/1306/1/012018

Influence of Activators on Mechanical Properties of Modified Fly Ash Based Geopolymer Mortars

Piotr Prochon, Zengfeng Zhao, Luc Courard, Tomasz Piotrowski, Frédéric Michel and Andrzej Garbacz

Materials, 2020, 13, 1033
DOI: 10.3390/ma13051033

Hardening evolution of geopolymers from setting to equilibrium: A review

Navid Ranjbar, Carsten Kuenzel, Jon Spangenberg and Mehdi Mehrali

Cement and Concrete Composites, 2020, 114, 103729
DOI: 10.1016/j.cemconcomp.2020.103729

Design of sustainable geopolymeric matrices for encapsulation of treated radioactive solid organic waste

Andrea Santi, Eros Mossini, Gabriele Magugliani, Francesco Galluccio, Elena Macerata, Paolo Lotti, Giacomo Diego Gatta, Dhanalakshmi Vadivel, Daniele Dondi, Davide Cori, Hélène Nonnet and Mario Mariani

Front. Mater., 2022, 9
DOI: 10.3389/fmats.2022.1005864

Alkali-bauxite fusion method of synthesizing ambient-cured volcanic ash geopolymer cement mortars

Léonel N. Tchadjié, Stephen O. Ekolu and Harry A. Quainoo

Construction and Building Materials, 2023, 383, 131401
DOI: 10.1016/j.conbuildmat.2023.131401

Influence of mechanical activation of coal gangue on the strength and microstructure of geopolymer

S.N.A. Bakil, Márton Tóth, Jamal-Eldin FM Ibrahim and Gábor Mucsi

Construction and Building Materials, 2025, 486, 141977
DOI: 10.1016/j.conbuildmat.2025.141977

Role of particle fineness on engineering properties and microstructure of fly ash derived geopolymer

S.K. Nath and Sanjay Kumar

Construction and Building Materials, 2020, 233, 117294
DOI: 10.1016/j.conbuildmat.2019.117294

Long-term durability properties of geopolymer concrete: An in-depth review

Mugahed Amran, Amin Al-Fakih, S.H. Chu, Roman Fediuk, Sani Haruna, Afonso Azevedo and Nikolai Vatin

Case Studies in Construction Materials, 2021, 15, e00661
DOI: 10.1016/j.cscm.2021.e00661

Evaluation of performances of volcanic-ash-laterite based blended geopolymer concretes: Mechanical properties and durability

Jordan Valdès Sontia Metekong, Cyriaque Rodrigue Kaze, Juvenal Giogetti Deutou, Paul Venyite, Achile Nana, Elie Kamseu, Uphie Chinje Melo and Thomas Tamo Tatietse

Journal of Building Engineering, 2021, 34, 101935
DOI: 10.1016/j.jobe.2020.101935

Mechanochemical synthesis of one-part alkali aluminosilicate hydraulic cement

Faris Matalkah, Liwei Xu, Wenda Wu and Parviz Soroushian

Mater Struct, 2017, 50
DOI: 10.1617/s11527-016-0968-4

Influence of Granulated Silico-Manganese Slag on Compressive Strength and Microstructure of Ambient Cured Alkali-Activated Fly Ash Binder

S. K. Nath and Sanjay Kumar

Waste Biomass Valor, 2019, 10, 2045
DOI: 10.1007/s12649-018-0213-1

Impacts of milling duration on construction and demolition waste (CDW) based precursor and resulting geopolymer: Reactivity, geopolymerization and sustainability

Jiawei Tan, Özlem Cizer, Jentel De Vlieger, Hancheng Dan and Jiabin Li

Resources, Conservation and Recycling, 2022, 184, 106433
DOI: 10.1016/j.resconrec.2022.106433

Influence of Mechanically Activated Silico-Manganese Slag on Hydration and Properties Development of Blended Cement

Susanta K. Nath and Rohit B. Meshram

Trans Indian Inst Met, 2024, 77, 2797
DOI: 10.1007/s12666-024-03359-z

Role of iron in the enhanced reactivity of pulverized Red mud: Analysis by Mössbauer spectroscopy and FTIR spectroscopy

Smita Singh, M.U. Aswath, Rahul Das Biswas, R.V. Ranganath, Harish K. Choudhary, Rajeev Kumar and Balaram Sahoo

Case Studies in Construction Materials, 2019, 11, e00266
DOI: 10.1016/j.cscm.2019.e00266

One-part alkali activated cement based volcanic pumice

Areej T. Almalkawi, Sameer Hamadna and Parviz Soroushian

Construction and Building Materials, 2017, 152, 367
DOI: 10.1016/j.conbuildmat.2017.06.139

Alkali-activated binary concrete based on a natural pozzolan: physical, mechanical and microstructural characterization

R. Robayo-Salazar, R. Mejía de Gutiérrez and F. Puertas

Mater. constr., 2019, 69, e191
DOI: 10.3989/mc.2019.06618

Alkali activators with different cations turning volcanic ash into eco-friendly geopolymers

Rongrong Zhang, Feng Li, Siqi Zhou, Yijie Su, Duanyang Liu and Qi Niu

Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 2024, 177, 111
DOI: 10.1680/jensu.22.00078

Alkali-Activated Binder Based on Milled Antigorite

Elena V. Kalinkina, Basya I. Gurevich and Alexander M. Kalinkin

Minerals, 2018, 8, 503
DOI: 10.3390/min8110503

Insights into alkali and acid-activated volcanic ash-based materials: A review

Jean Noel Yankwa Djobo and Sylvain Tome

Cement and Concrete Composites, 2024, 152, 105660
DOI: 10.1016/j.cemconcomp.2024.105660

Reactivity of volcanic ash in alkaline medium, microstructural and strength characteristics of resulting geopolymers under different synthesis conditions

Jean Noël Yankwa Djobo, Antoine Elimbi, Hervé Kouamo Tchakouté and Sanjay Kumar

J Mater Sci, 2016, 51, 10301
DOI: 10.1007/s10853-016-0257-1

Phase and dimensional stability of volcanic ash-based phosphate inorganic polymers at elevated temperatures

Jean Noël Yankwa Djobo, Antoine Elimbi and Dietmar Stephan

SN Appl. Sci., 2020, 2
DOI: 10.1007/s42452-020-2616-4

The combined influence of classification and mechanical activation of kaolin on the structure and properties of geopolymer

Roland Szabó, Ferenc Kristály, Fanni Dolgos, Mária Ambrus and Gábor Mucsi

Case Studies in Construction Materials, 2025, 22, e04876
DOI: 10.1016/j.cscm.2025.e04876

Response surface methodology to model the effects of key synthesis parameter interactions on mechanical and microstructural properties of natural pozzolan-based geopolymers

Oualid Mahieddine Hamdi, Abderrachid Boumaza, Hichem Alioui, Laura Moretti, Abdellah Douadi, Kamel Hebbache and Ali Ahmed-Chaouch

Construction and Building Materials, 2025, 478, 141411
DOI: 10.1016/j.conbuildmat.2025.141411

A comparative study of compressed lateritic earth bricks stabilized with natural pozzolan-based geopolymer binders synthesized in acidic and alkaline conditions

Rolande Aurelie Tchouateu Kamwa, Leonel Tchadjie Noumbissie, Sylvain Tome, Eguekeng Idriss, Juvenal Giogetti Deutou Nemaleu, Birgit Tommes, Dennis Woschko, Christoph Janiak and Marie-Annie Etoh

Construction and Building Materials, 2023, 400, 132652
DOI: 10.1016/j.conbuildmat.2023.132652

Use of the Algerian natural pozzolan for the production of a geopolymer as a complete cement replacement

Oualid Mahieddine Hamdi, Ali Ahmed-Chaouch, Messaoud Saïdani and Hichem Alioui

Construction and Building Materials, 2023, 400, 132723
DOI: 10.1016/j.conbuildmat.2023.132723

Improving the properties of metakaolin/fly ash composite geopolymers with ultrafine fly ash ground by steam-jet mill

Quanchao Zhang, Dajian Huang, Xiaopeng Zhang, Longyuan Lin, Zhiwu Wang, Wenjie Tang and Xiaohu Qiang

Construction and Building Materials, 2023, 387, 131673
DOI: 10.1016/j.conbuildmat.2023.131673

Mechanical properties of geopolymers synthesized using basalt powder as a partial substitute for metakaolin

Dawid Mrozek, Magdalena Mrozek and Rafał Krzywoń

Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-96447-z

Recent applications of steel slag in construction industry

J. Baalamurugan, V. Ganesh Kumar, R. Padmapriya and V. K. Bupesh Raja

Environ Dev Sustain, 2023, 26, 2865
DOI: 10.1007/s10668-022-02894-3

Activation of volcanic ash as support for FeOx gliding arc plasma deposition and application in the catalytic oxidation of Rhodamine 6 G

Mélanie Pitap-Mbowou, Franck W. Boyom-Tatchemo, Elie Acayanka, Georges Kamgang-Youbi, Christophe Poupin, Sebastián A. Gámez-Rivera, Renaud Cousin, Eric M. Gaigneaux and Samuel Laminsi

Journal of Environmental Chemical Engineering, 2024, 12, 114589
DOI: 10.1016/j.jece.2024.114589

Thermal and mechanical characterization of fly ash geopolymer with aluminium chloride and potassium hydroxide treated hemp shiv lightweight aggregate

Chalermphan Narattha, Suthee Wattanasiriwech and Darunee Wattanasiriwech

Construction and Building Materials, 2022, 331, 127206
DOI: 10.1016/j.conbuildmat.2022.127206

Study of synergy between a natural volcanic pozzolan and a granulated blast furnace slag in the production of geopolymeric pastes and mortars

Rafael Andres Robayo-Salazar, Mejía de Gutiérrez and Francisca Puertas

Construction and Building Materials, 2017, 157, 151
DOI: 10.1016/j.conbuildmat.2017.09.092

Improved Reactivity of Volcanic Ash using Municipal Solid Incinerator Fly Ash for Alkali-Activated Cement Synthesis

Sylvain Tome, Marie-Annie Etoh, Jacques Etame and Sanjay Kumar

Waste Biomass Valor, 2020, 11, 3035
DOI: 10.1007/s12649-019-00604-1

Metakaolin-based geopolymers filled with volcanic fly ashes: FT-IR, thermal characterization, and antibacterial property

Ignazio Blanco, Antonio D’Angelo, Veronica Viola, Luigi Vertuccio and Michelina Catauro

Science and Engineering of Composite Materials, 2023, 30
DOI: 10.1515/secm-2022-0192

Materials for Production of High and Ultra-High Performance Concrete: Review and Perspective of Possible Novel Materials

Markssuel Teixeira Marvila, Afonso Rangel Garcez de Azevedo, Paulo R. de Matos, Sergio Neves Monteiro and Carlos Maurício Fontes Vieira

Materials, 2021, 14, 4304
DOI: 10.3390/ma14154304

Preparation, characterization and rheological analysis of eco-friendly road geopolymer grouting materials based on volcanic ash and metakaolin

Siqi Zhou, Zhanning Yang, Rongrong Zhang and Feng Li

Journal of Cleaner Production, 2021, 312, 127822
DOI: 10.1016/j.jclepro.2021.127822

Binding Properties of Mechanically Activated Nepheline Containing Mining Waste

Basya I. Gurevich, Elena V. Kalinkina and Alexander M. Kalinkin

Minerals, 2020, 10, 48
DOI: 10.3390/min10010048

Effects of curing cycles on developing strength and microstructure of goethite-rich aluminosilicate (corroded laterite) based geopolymer composites

Joelle Nadia Nouping Fekoua, Cyriaque Rodrigue Kaze, Linda Lekuna Duna, Armeni Ghazouni, Ibrahim Mbouombuo Ndassa, Elie Kamseu, Sylvie Rossignol and Cristina Leonelli

Materials Chemistry and Physics, 2021, 270, 124864
DOI: 10.1016/j.matchemphys.2021.124864

Relationship between macro-properties and amorphous gel of FA-based AAMs with different curing conditions after elevated temperature

Da-Wang Zhang, Xue-Mei Sun and Hui Li

Ceramics International, 2023, 49, 17453
DOI: 10.1016/j.ceramint.2023.02.113

Impact of altered quartz surface chemistry on mechanical properties and microstructure of geopolymers

Xiuqiong Fu, Qian Wan, Yong Fan, Yimin Zhang, Ruobing Zhang and Zhijie Guo

Environmental Research, 2025, 285, 122428
DOI: 10.1016/j.envres.2025.122428

Application of Plackett–Burman and Box-Behnken designs for the optimization of Tunisian dam sediment-based geopolymers

Maryam Marzouki, Basma Samet and Hassib Tounsi

Journal of Building Engineering, 2022, 50, 104162
DOI: 10.1016/j.jobe.2022.104162

Effect of mechanical activation on reaction mechanism of one-part preparation fly ash/slag-based geopolymer

Yuanda Wang, Xuefang Wang, Ying Lou, Feng Gao and Wenda Wu

Advances in Cement Research, 2022, 34, 412
DOI: 10.1680/jadcr.21.00033

Effects of binder proportion and curing condition on the mechanical characteristics of volcanic ash- and slag-based geopolymer mortars; machine learning integrated experimental study

Mohammad-Hossein Nofalah, Pooria Ghadir, Hadi Hasanzadehshooiili, Mohammad Aminpour, Akbar A. Javadi and Majidreza Nazem

Construction and Building Materials, 2023, 395, 132330
DOI: 10.1016/j.conbuildmat.2023.132330

Long-term performance of novel high-calcium one-part alkali-activated cement developed from thermally activated lime kiln dust

Abdullah Kadhim, Monower Sadique, Rafal Al-Mufti and Khalid Hashim

Journal of Building Engineering, 2020, 32, 101766
DOI: 10.1016/j.jobe.2020.101766

Volcanic Ash as a Sustainable Binder Material: An Extensive Review

Andrés Játiva, Evelyn Ruales and Miren Etxeberria

Materials, 2021, 14, 1302
DOI: 10.3390/ma14051302

Utilization of carbonate-based tailings to remove Pb(II) from wastewater through mechanical activation

Bowen Xiong, Tingting Zhang, Yunliang Zhao, Tong Wen, Qiwu Zhang, Shenxu Bao and Shaoxian Song

Science of The Total Environment, 2020, 698, 134270
DOI: 10.1016/j.scitotenv.2019.134270

Alkali activation of mechanically activated low-grade clay

Morteza Tahmasebi Yamchelou, David W. Law, Indubushan Patnaikuni and Jie Li

Journal of Sustainable Cement-Based Materials, 2021, 10, 272
DOI: 10.1080/21650373.2020.1838355

Valorization of municipal solid waste incineration bottom ash (MSWIBA) into cold-bonded aggregates (CBAs): Feasibility and influence of curing methods

Jun Liu, Zhenlin Li, Weizhuo Zhang, Hesong Jin, Feng Xing, Chaoyun Chen, Luping Tang and Yanshuai Wang

Science of The Total Environment, 2022, 843, 157004
DOI: 10.1016/j.scitotenv.2022.157004

The influence of mechanochemical activation on the rheological properties and strength development of geopolymer

Sixiang Kang, Jize Wang, Cheng Hu, Hongyu Yao, Huaqiang Sun, Wenda Wu, Xuefang Wang, Mengxi Huang and Miaojia Hu

Journal of Building Engineering, 2024, 96, 110585
DOI: 10.1016/j.jobe.2024.110585

Recycling and optimum utilization of GFRP waste into low-carbon geopolymer paste for sustainable development

Jiazhen Dong, Minkun Chen and Jun Wang

Journal of Building Engineering, 2024, 97, 110867
DOI: 10.1016/j.jobe.2024.110867

Effects of heat and pressure on hot-pressed geopolymer

Navid Ranjbar, Amin Kashefi, Guang Ye and Mehdi Mehrali

Construction and Building Materials, 2020, 231, 117106
DOI: 10.1016/j.conbuildmat.2019.117106

The Effect of Alkaline Activator Components on the Properties of Fly Ash Added Pumice Based Geopolymer

Cemal KARAASLAN and Engin YENER

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2021, 11, 1255
DOI: 10.21597/jist.840872

Effects of the Duration of Landfill Disposal on the Physicochemical, Mineralogical and Toxicity Characteristics of Coal Ash

Xuefang Wang, Faris Matalkah, Nastaran Abdol, Salina Ramli, Parviz Soroushian and Anagi M. Balachandra

International Journal of Coal Preparation and Utilization, 2021, 41, 51
DOI: 10.1080/19392699.2018.1445622

Towards the valorization of Cumbre Vieja volcanic ash – Production of alternative cements

M.M. Tashima, L. Soriano, M.V. Borrachero, J. Monzó and J. Payá

Construction and Building Materials, 2023, 370, 130635
DOI: 10.1016/j.conbuildmat.2023.130635

Resistance of Alkali-Activated Blended Volcanic Ash-MSWI-FA Mortar in Sulphuric Acid and Artificial Seawater

Sylvain Tome, Achile Nana, Cyriaque Rodrigue Kaze, Jean Noel Yankwa Djobo, Thamer Alomayri, Elie Kamseu, Marie-Anne Etoh, Jacques Etame and Sanjay Kumar

Silicon, 2022, 14, 2687
DOI: 10.1007/s12633-021-01055-x

Development and optimization of geopolymer adsorbent for water treatment: Application of mixture design approach

Badr Aouan, Saliha Alehyen, Mouhcine Fadil, Marouane El Alouani, Hamid Saufi, El Hassania El Herradi, Fadoua El Makhoukhi and M'hamed Taibi

Journal of Environmental Management, 2023, 338, 117853
DOI: 10.1016/j.jenvman.2023.117853

Effect of powder properties of solid alkali activators on the properties of one-part alkali-activated materials

Zhang Da-Wang, Tian-Tian Yang and Hui Li

Journal of Building Engineering, 2025, 109, 112970
DOI: 10.1016/j.jobe.2025.112970

Halloysite reinforced 3D-printable geopolymers

Navid Ranjbar, Carsten Kuenzel, Carsten Gundlach, Paul Kempen and Mehdi Mehrali

Cement and Concrete Composites, 2023, 136, 104894
DOI: 10.1016/j.cemconcomp.2022.104894

Upcycling of natural volcanic resources for geopolymer: Comparative study on synthesis, reaction mechanism and rheological behavior

Siqi Zhou, Chenghong Lu, Xingyi Zhu and Feng Li

Construction and Building Materials, 2021, 268, 121184
DOI: 10.1016/j.conbuildmat.2020.121184

Preparation and rheological performance analysis of volcanic ash and metakaolin based geopolymer grouting materials

Zhanning Yang, Siqi Zhou, Feng Li, Rongrong Zhang and Xingyi Zhu

Road Materials and Pavement Design, 2023, 24, 1614
DOI: 10.1080/14680629.2022.2092024

The Effect of Sodium and Magnesium Sulfate on Physico-Mechanical and Microstructural Properties of Kaolin and Ceramic Powder-Based Geopolymer Mortar

Mehmet Kaya, Fuat Köksal, Mehrab Nodehi, Muhammed Bayram, Osman Gencel and Togay Ozbakkaloglu

Sustainability, 2022, 14, 13496
DOI: 10.3390/su142013496

Characterization, activation and reactivity – A case study of Nordic volcanic materials for application as Supplementary Cementitious Materials

Amrita Hazarika, Liming Huang, Sigurdur Erlingsson, Klaartje de Weerdt, Ingemar Löfgren, Sahar Iftikhar and Arezou Babaahmadi

Case Studies in Construction Materials, 2025, 22, e04096
DOI: 10.1016/j.cscm.2024.e04096

Performance of precursor characteristics in the realisation of geopolymer concrete: a review

Saswat Dwibedy, Suraj Kumar Parhi, Soumyaranjan Panda and Saubhagya Kumar Panigrahi

Magazine of Concrete Research, 2024, 76, 1404
DOI: 10.1680/jmacr.24.00120

Effect of milled pegmatite quarry wastes powders on structure, microstructure and mechanical properties of pegmatite-based geopolymers

Achile Nana, Eric Ngankam Sakue, Paul Venyite, Sybilline Claudelle Djadock Anensong, Noela Epey, Adeolu Adesoji Adediran, Elie Kamseu, Sanjay Kumar and Cristina Leonelli

Materialia, 2024, 33, 102022
DOI: 10.1016/j.mtla.2024.102022

Mechanochemically Assisted Coal Fly Ash Conversion into Zeolite

Ewelina Grabias-Blicharz, Rafał Panek, Małgorzata Franus and Wojciech Franus

Materials, 2022, 15, 7174
DOI: 10.3390/ma15207174

Mechanical properties and durability of volcanic ash based geopolymer mortars

Jean Noël Yankwa Djobo, Antoine Elimbi, Hervé Kouamo Tchakouté and Sanjay Kumar

Construction and Building Materials, 2016, 124, 606
DOI: 10.1016/j.conbuildmat.2016.07.141