Tipping water balance and the Pt loading effect in polymer electrolyte fuel cells: a model-based analysis

Tasleem Muzaffar, Thomas Kadyk and Michael Eikerling

Sustainable Energy Fuels, 2018, 2, 1189
DOI: 10.1039/C8SE00026C

The influence of the anion exchange membrane on mass-transport limiting phenomena in bipolar interface fuel cells with Fe–N/C based cathode catalyst layers

Dominik Seeberger, Pascal Hauenstein, Adrian Hartert and Simon Thiele

RSC Adv., 2021, 11, 31477
DOI: 10.1039/D1RA05010A

Designing a membrane electrode assembly for weakly humidity-dependent proton exchange membrane fuel cells

Kangwei Qiao, Huibing Liu, Kui Ren, Panpan Sun, Liu Yang, Shitao Wang and Dapeng Cao

Sustainable Energy Fuels, 2023, 7, 1829
DOI: 10.1039/D2SE01675C

Heteropoly acid functionalized fluoroelastomer with outstanding chemical durability and performance for vehicular fuel cells

Andrew R. Motz, Mei-Chen Kuo, James L. Horan, Rameshwar Yadav, Soenke Seifert, Tara P. Pandey, Samuel Galioto, Yuan Yang, Nilesh V. Dale, Steven J. Hamrock and Andrew M. Herring

Energy Environ. Sci., 2018, 11, 1499
DOI: 10.1039/C8EE00545A

Bipolar-interface fuel cells – an underestimated membrane electrode assembly concept for PGM-free ORR catalysts

Dominik Seeberger, David McLaughlin, Pascal Hauenstein and Simon Thiele

Sustainable Energy Fuels, 2020, 4, 2508
DOI: 10.1039/D0SE00288G

Directly deposited Nafion/TiO2 composite membranes for high power medium temperature fuel cells

Niklas Wehkamp, Matthias Breitwieser, Andreas Büchler, Matthias Klingele, Roland Zengerle and Simon Thiele

RSC Adv., 2016, 6, 24261
DOI: 10.1039/C5RA27462A

Three-dimensional morphology of the interface between micro porous layer and catalyst layer in a polymer electrolyte membrane fuel cell

L. Zielke, S. Vierrath, R. Moroni, A. Mondon, R. Zengerle and S. Thiele

RSC Adv., 2016, 6, 80700
DOI: 10.1039/C6RA16560E

Overall design of novel 3D-ordered MEA with drastically enhanced mass transport for alkaline electrolyzers

Lei Wan, Ziang Xu, Qin Xu, Peican Wang and Baoguo Wang

Energy Environ. Sci., 2022, 15, 1882
DOI: 10.1039/D2EE00273F

Improving the water management in anion-exchange membrane fuel cells via ultra-thin, directly deposited solid polymer electrolyte

Philipp Veh, Benjamin Britton, Steven Holdcroft, Roland Zengerle, Severin Vierrath and Matthias Breitwieser

RSC Adv., 2020, 10, 8645
DOI: 10.1039/C9RA09628K

On the stability of anion exchange membrane fuel cells incorporating polyimidazolium ionene (Aemion+®) membranes and ionomers

Qiliang Wei, Xinzhi Cao, Philipp Veh, Anastasiia Konovalova, Peter Mardle, Philip Overton, Simon Cassegrain, Severin Vierrath, Matthias Breitwieser and Steven Holdcroft

Sustainable Energy Fuels, 2022, 6, 3551
DOI: 10.1039/D2SE00690A

All sprayed fluorine-free membrane electrode assembly for low-platinum and low-humidity proton exchange membrane fuel cells

Weisheng Yu, Xiaoqi Yang, Xian Liang, Yan Xu, Xianhe Shen, Xiaolin Ge, Liang Wu and Tongwen Xu

J. Mater. Chem. A, 2023, 11, 9002
DOI: 10.1039/D3TA00603D

Catalytic layer-membrane electrode assembly methods for optimum triple phase boundaries and fuel cell performances

Imen Fouzaï, Solène Gentil, Victor Costa Bassetto, Wanderson Oliveira Silva, Raddaoui Maher and Hubert H. Girault

J. Mater. Chem. A, 2021, 9, 11096
DOI: 10.1039/D0TA07470E

Key components and design strategy of the membrane electrode assembly for alkaline water electrolysis

Lei Wan, Ziang Xu, Qin Xu, Maobing Pang, Dongcheng Lin, Jing Liu and Baoguo Wang

Energy Environ. Sci., 2023, 16, 1384
DOI: 10.1039/D3EE00142C

Understanding the functions and modifications of interfaces in membrane electrode assemblies of proton exchange membrane fuel cells

Zixuan Shangguan, Bing Li, Pingwen Ming and Cunman Zhang

J. Mater. Chem. A, 2021, 9, 15111
DOI: 10.1039/D1TA01591E

The reasons for the high power density of fuel cells fabricated with directly deposited membranes

Severin Vierrath, Matthias Breitwieser, Matthias Klingele, Benjamin Britton, Steven Holdcroft, Roland Zengerle and Simon Thiele

Journal of Power Sources, 2016, 326, 170
DOI: 10.1016/j.jpowsour.2016.06.132

Proton-Conducting Poly-γ-glutamic Acid Nanofiber Embedded Sulfonated Poly(ether sulfone) for Proton Exchange Membranes

Hang Wang, Xupin Zhuang, Xiaoyin Wang, Congju Li, Zheng Li, Weimin Kang, Yan Yin, Michael D. Guiver and Bowen Cheng

ACS Appl. Mater. Interfaces, 2019, 11, 21865
DOI: 10.1021/acsami.9b01200

A cost-effective and highly efficient dissymmetric membrane electrode assembly designed for fuel cells

Xue Gong, Mingbo Ruan, Ping Song, He Li, Jing Cao, Pengfei Yao and Weilin Xu

Journal of Power Sources, 2021, 489, 229485
DOI: 10.1016/j.jpowsour.2021.229485

Tailoring proton transfer species on the membrane surface: An approach to enhance proton conductivity for polymer electrolyte membrane fuel cell

Adisak Pokprasert and Suwabun Chirachanchai

Polymer, 2023, 265, 125583
DOI: 10.1016/j.polymer.2022.125583

Effect of membrane deposition methods on the performance of membrane electrode assemblies

Yijing Xing, Lei Liu, Zhuoqun Li, Yifan Li, Zhiyong Fu and Haibin Li

Fuel Cells, 2023, 23, 161
DOI: 10.1002/fuce.202200190

Study on fiber-reinforced proton exchange membrane using high-surface-energy substrate

Min Wang, Wenjia Ma, Congrong Yang, Zhangxun Xia, Suli Wang and Gongquan Sun

Journal of Membrane Science, 2022, 647, 119940
DOI: 10.1016/j.memsci.2021.119940

Reinforced integrated membrane electrode assembly based on ionomer wet-binding and ePTFE reinforcement strategy for proton exchange membrane fuel cells

Yijing Xing, Lei Liu, Zhiyong Fu, Yifan Li and Haibin Li

International Journal of Hydrogen Energy, 2024, 50, 79
DOI: 10.1016/j.ijhydene.2023.08.024

2022 roadmap on 3D printing for energy

Albert Tarancón, Vincenzo Esposito, Marc Torrell, Marcel Di Vece, Jae Sung Son, Poul Norby, Sourav Bag, Patrick S Grant, A Vogelpoth, S Linnenbrink, M Brucki, T Schopphoven, A Gasser, Elif Persembe, Dionysia Koufou, Simon Kuhn, Rob Ameloot, Xu Hou, Kurt Engelbrecht, Christian R H Bahl, Nini Pryds, Jie Wang, Costas Tsouris, Eduardo Miramontes, Lonnie Love, Canhai Lai, Xin Sun, Martin Ryhl Kærn, Gennaro Criscuolo and David Bue Pedersen

J. Phys. Energy, 2022, 4, 011501
DOI: 10.1088/2515-7655/ac483d

Multifunctional Nafion/CeO2 Dendritic Structures for Enhanced Durability and Performance of Polymer Electrolyte Membrane Fuel Cells

Jiwoo Choi, Je Hyeon Yeon, Seung Ho Yook, Sungsoo Shin, Jin Young Kim, Mansoo Choi and Segeun Jang

ACS Appl. Mater. Interfaces, 2021, 13, 806
DOI: 10.1021/acsami.0c21176

Cerium Oxide Decorated Polymer Nanofibers as Effective Membrane Reinforcement for Durable, High‐Performance Fuel Cells

Matthias Breitwieser, Carolin Klose, Armin Hartmann, Andreas Büchler, Matthias Klingele, Severin Vierrath, Roland Zengerle and Simon Thiele

Advanced Energy Materials, 2017, 7
DOI: 10.1002/aenm.201602100

Potential of 3D Printing for Heat Exchanger Heat Transfer Optimization—Sustainability Perspective

Beata Anwajler

Inventions, 2024, 9, 60
DOI: 10.3390/inventions9030060

Spray deposition of sulfonated cellulose nanofibers as electrolyte membranes in fuel cells

Thomas Bayer, Benjamin Vaughan Cunning, Břetislav Šmíd, Roman Selyanchyn, Shigenori Fujikawa, Kazunari Sasaki and Stephen Matthew Lyth

Cellulose, 2021, 28, 1355
DOI: 10.1007/s10570-020-03593-w

Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies

Scott A. Mauger, Jason R. Pfeilsticker, Min Wang, Samantha Medina, A.C. Yang-Neyerlin, K.C. Neyerlin, Caleb Stetson, Svitlana Pylypenko and Michael Ulsh

Journal of Power Sources, 2020, 450, 227581
DOI: 10.1016/j.jpowsour.2019.227581

A Novel Approach to Fabricate Membrane Electrode Assembly by Directly Coating the Nafion Ionomer on Catalyst Layers for Proton-Exchange Membrane Fuel Cells

Cheng Yang, Ning Han, Yajun Wang, Xiao-Zi Yuan, Jiaoyan Xu, Henghui Huang, Jiantao Fan, Hui Li and Haijiang Wang

ACS Sustainable Chem. Eng., 2020, 8, 9803
DOI: 10.1021/acssuschemeng.0c02386

Optimization of the Interface Between Catalyst Layer and Proton Exchange Membrane via Rolled Technique

Shumeng Guan, Fen Zhou, Shaojie Du and Mu Pan

J. Electrochem. Soc., 2022, 169, 014504
DOI: 10.1149/1945-7111/ac44bd

Spray deposition of Nafion membranes: Electrode-supported fuel cells

Thomas Bayer, Hung Cuong Pham, Kazunari Sasaki and Stephen Matthew Lyth

Journal of Power Sources, 2016, 327, 319
DOI: 10.1016/j.jpowsour.2016.07.059

Activation mechanisms in the catalyst coated membrane of PEM fuel cells

Kläre Christmann, K. Andreas Friedrich and Nada Zamel

Progress in Energy and Combustion Science, 2021, 85, 100924
DOI: 10.1016/j.pecs.2021.100924

Solid-state proton conduction in graphene-derived nanomaterials

Sweety Gupta, Palak Mehra and Amit Paul

Sustain. Sci. Technol., 2025, 2, 013001
DOI: 10.1088/2977-3504/adb632

Sequential multistep process for fabricating reinforced membranes and electrodes using a symmetric multinozzle spray system for durable fuel cells

Yeonghwan Jang, Yeonjae Lee, Sanghyeok Lee, Sungjun Kim, Sang Moon Kim and Segeun Jang

Journal of Power Sources, 2025, 654, 237808
DOI: 10.1016/j.jpowsour.2025.237808

Modulating Cation and Water Transports for Enhanced CO Electrolysis via Ionomer Coating

Muflih A. Adnan, Shariful Kibria Nabil, Karthick Kannimuthu and Md Golam Kibria

ChemSusChem, 2024, 17
DOI: 10.1002/cssc.202301425

“The development of a through-plane reactive excitation technique for detection of pinholes in membrane-containing MEA sub-assemblies”

Michael Ulsh, Annalisa DeBari, Jacob M. Berliner, Iryna V. Zenyuk, Peter Rupnowski, Larissa Matvichuk, Adam Z. Weber and Guido Bender

International Journal of Hydrogen Energy, 2019, 44, 8533
DOI: 10.1016/j.ijhydene.2018.12.181

Design Strategies for Alkaline Exchange Membrane–Electrode Assemblies: Optimization for Fuel Cells and Electrolyzers

Aviv Ashdot, Mordechai Kattan, Anna Kitayev, Ervin Tal-Gutelmacher, Alina Amel and Miles Page

Membranes, 2021, 11, 686
DOI: 10.3390/membranes11090686

Separators and Membranes for Advanced Alkaline Water Electrolysis

Dirk Henkensmeier, Won-Chul Cho, Patric Jannasch, Jelena Stojadinovic, Qingfeng Li, David Aili and Jens Oluf Jensen

Chem. Rev., 2024, 124, 6393
DOI: 10.1021/acs.chemrev.3c00694

Communication—Electropolymerization of Anion-Conducting Polymer Films

Zi-Ye Xiao, Charles E. Diesendruck, Viatcheslav Freger and Dario R. Dekel

J. Electrochem. Soc., 2022, 169, 064506
DOI: 10.1149/1945-7111/ac74e5

Use of reduced-voltage EIS to establish a relation between oxygen concentration and EIS responses of large commercial PEM fuel cell modules

Babak Ghorbani, Jake DeVaal, Greg Afonso and Krishna Vijayaraghavan

International Journal of Hydrogen Energy, 2023, 48, 32654
DOI: 10.1016/j.ijhydene.2023.04.323

Tomographic Reconstruction and Analysis of a Silver CO2 Reduction Cathode

David McLaughlin, Markus Bierling, Riko Moroni, Christoph Vogl, Günter Schmid and Simon Thiele

Advanced Energy Materials, 2020, 10
DOI: 10.1002/aenm.202000488

Construction of interfacial layer on microporous layer for enhancing gas diffusion electrode performance

Guangwei Li, Ting Xu, Sai Luo, Qiang Wang, Xiao Li, Danmin Xing, Pingwen Ming, Bing Li and Cunman Zhang

Journal of Power Sources, 2025, 637, 236598
DOI: 10.1016/j.jpowsour.2025.236598

A high-performance membrane electrode assembly for polymer electrolyte membrane fuel cell with poly(arylene ether sulfone) nanofibers as effective membrane reinforcements

Yang Zhao, Xue Li, WeiWei Li, Zhongyang Wang, Shubo Wang, Xiaofeng Xie and Vijay Ramani

Journal of Power Sources, 2019, 444, 227250
DOI: 10.1016/j.jpowsour.2019.227250

Hydrogen–Air Fuel Cells with Open Cathode for High-Rate Electric Energy Systems

S. I. Nefedkin, A. V. Ivanenko, V. I. Pavlov, S. V. Panov, S. V. Shubenkov, M. A. Klimova and A. V. Ryabukhin

Russ J Electrochem, 2022, 58, 151
DOI: 10.1134/S1023193522020082

Seed‐Mediated Synthesis of High Loading PtCo Intermetallic Compounds Enhanced Catalytic Efficacy and Long‐Term Stability for Oxygen Reduction Reaction

Leilei Cai, Zuobo Yang, Tingting Liu, Ningjie Jin, Yaqi Cao, Sung Lai Jimmy Yun, Jie Zhang and Hong Zhao

ChemPlusChem, 2025, 90
DOI: 10.1002/cplu.202400561

Advanced 3D ordered electrodes for PEMFC applications: From structural features and fabrication methods to the controllable design of catalyst layers

Kaili Wang, Tingting Zhou, Zhen Cao, Zhimin Yuan, Hongyan He, Maohong Fan and Zaiyong Jiang

Green Energy & Environment, 2024, 9, 1336
DOI: 10.1016/j.gee.2023.11.002

UV initiated surface grafting on polyethersulfone ultrafiltration membranes via ink-jet printing-assisted modification

Roy Bernstein, Clare E. Singer, Swatantra P. Singh, Canwei Mao and Christopher J. Arnusch

Journal of Membrane Science, 2018, 548, 73
DOI: 10.1016/j.memsci.2017.10.069

Design and Performance Investigation of a Carbon‐Free Pt/Ti Cathode with Low Membrane Degradation Rate for Proton Exchange Membrane Water Electrolyser

Yan Shi, Lili Guo, Zhuoxin Lu, Zhida Wang, Yuan Gan, Changqing Guo, Hongyi Tan and Changfeng Yan

Energy Tech, 2019, 7
DOI: 10.1002/ente.201800781

Proton-Conducting Cobalt(II) 3D MOFs Incorporating Bis(imidazole) and Polycarboxylate Linkages: Framework Topology and Interpenetration

Zih-Yi Lin, Amitabha Datta, Kuheli Das, Arif I. Inamdar, Hsi-Yuan Hsieh, Yao-Huei Huang, Ming-Hsi Chiang, Chia-Jyi Liu, Liang-Rui Chen, Yang-Wei Lin and Hon Man Lee

Crystal Growth & Design, 2021, 21, 5594
DOI: 10.1021/acs.cgd.1c00385

Structural, optical ellipsometry, and magnetic characteristics of iron-doped zinc oxide thin films for spintronic applications

S. M. Al-Shomar, Alaa Ahmed Akl, Dorsaf Mansour, Fekhra Hedhili, Affia Aslam, Ehab S. Mohamed, Lamiaa Galal and Safwat A. Mahmoud

J Mater Sci: Mater Electron, 2023, 34
DOI: 10.1007/s10854-023-10294-0

Tailoring the Membrane‐Electrode Interface in PEM Fuel Cells: A Review and Perspective on Novel Engineering Approaches

Matthias Breitwieser, Matthias Klingele, Severin Vierrath, Roland Zengerle and Simon Thiele

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201701257

Fabrication of a Robust PEM Water Electrolyzer Based on Non‐Noble Metal Cathode Catalyst: [Mo3S13]2− Clusters Anchored to N‐Doped Carbon Nanotubes

Peter K. R. Holzapfel, Melanie Bühler, Daniel Escalera‐López, Markus Bierling, Florian D. Speck, Karl J. J. Mayrhofer, Serhiy Cherevko, Chuyen V. Pham and Simon Thiele

Small, 2020, 16
DOI: 10.1002/smll.202003161

A completely slot die coated membrane electrode assembly

Markus Stähler, Andrea Stähler, Fabian Scheepers, Marcelo Carmo and Detlef Stolten

International Journal of Hydrogen Energy, 2019, 44, 7053
DOI: 10.1016/j.ijhydene.2019.02.016

Proton exchange membrane fuel cell (PEMFC) operation in high current density (HCD): Problem, progress and perspective

Fengyang Cai, Shanshan Cai and Zhengkai Tu

Energy Conversion and Management, 2024, 307, 118348
DOI: 10.1016/j.enconman.2024.118348

The Control and Effect of Pore Size Distribution in AEMFC Catalyst Layers

Benjamin Britton and Steven Holdcroft

J. Electrochem. Soc., 2016, 163, F353
DOI: 10.1149/2.0421605jes

Recent advances in designing and tailoring nanofiber composite electrolyte membranes for high-performance proton exchange membrane fuel cells

Hang Wang, Jinghan Zhang, Xin Ning, Mingwei Tian, Yunze Long and Seeram Ramakrishna

International Journal of Hydrogen Energy, 2021, 46, 25225
DOI: 10.1016/j.ijhydene.2021.05.048

Degradation Characteristics of Electrospun Gas Diffusion Layers with Custom Pore Structures for Polymer Electrolyte Membrane Fuel Cells

Manojkumar Balakrishnan, Pranay Shrestha, ChungHyuk Lee, Nan Ge, Kieran F. Fahy, Matthias Messerschmidt, Joachim Scholta, László Eifert, Julia Maibach, Roswitha Zeis, Benjamin D. Hatton and Aimy Bazylak

ACS Appl. Mater. Interfaces, 2021, 13, 2414
DOI: 10.1021/acsami.0c15324

Emerging Cu‐Based Tandem Catalytic Systems for CO2 Electroreduction to Multi‐Carbon Products

Qingqing Qin, Hongli Suo, Lijia Chen, Yun‐Xiao Wang, Jia‐Zhao Wang, Hua‐Kun Liu, Shi‐Xue Dou, Mengmeng Lao and Wei‐Hong Lai

Adv Materials Inter, 2024, 11
DOI: 10.1002/admi.202301049

Highly Durable Membrane Electrode Assembly with Multiwalled Carbon Nanotubes/CeO2‐Reinforced Nafion Composite Membrane by Spraying Method for Fuel Cell Applications

Eunho Choi, Sang Moon Kim and Segeun Jang

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202101360

Fabrication of high-performance gas diffusion electrode via microporous layer surface morphology control

Guangwei Li, Ting Xu, Sai Luo, Qiang Wang, Xiao Li, Danmin Xing, Pingwen Ming, Bing Li and Cunman Zhang

Journal of Power Sources, 2024, 623, 235415
DOI: 10.1016/j.jpowsour.2024.235415

Localized growth of atomic-layer-deposited platinum catalysts on plasma-treated surface of carbon nanotubes

Junmo Koo, Heon Jun Jeong, Wonjoon Choi and Joon Hyung Shim

Scripta Materialia, 2023, 226, 115185
DOI: 10.1016/j.scriptamat.2022.115185

Humidification strategy for polymer electrolyte membrane fuel cells – A review

Yafei Chang, Yanzhou Qin, Yan Yin, Junfeng Zhang and Xianguo Li

Applied Energy, 2018, 230, 643
DOI: 10.1016/j.apenergy.2018.08.125

Effect of cobalt ion contamination on proton conduction of ultrathin Nafion film

Aidi Han, Cehuang Fu, Xiaohui Yan, Junren Chen, Xiaojing Cheng, Changchun Ke, Junbo Hou, Shuiyun Shen and Junliang Zhang

International Journal of Hydrogen Energy, 2020, 45, 25276
DOI: 10.1016/j.ijhydene.2020.06.205

Methanol Steam Reforming over ZnPt/MoC Catalysts: Effects of Hydrogen Treatment

Fufeng Cai, Jessica Juweriah Ibrahim, Yu Fu, Wenbo Kong, Shuqing Li, Jun Zhang and Yuhan Sun

Ind. Eng. Chem. Res., 2020, 59, 18756
DOI: 10.1021/acs.iecr.0c03311

Simple fabrication of 12 μm thin nanocomposite fuel cell membranes by direct electrospinning and printing

Matthias Breitwieser, Carolin Klose, Matthias Klingele, Armin Hartmann, Johannes Erben, Hyeongrae Cho, Jochen Kerres, Roland Zengerle and Simon Thiele

Journal of Power Sources, 2017, 337, 137
DOI: 10.1016/j.jpowsour.2016.10.094

Engineered Membrane–Electrode Interface for Hydrocarbon-Based Polymer-Electrolyte-Membrane Fuel Cells via Solvent-Vapor-Annealed Deposition

Keun-Hwan Oh and Insung Bae

ACS Appl. Nano Mater., 2019, 2, 3857
DOI: 10.1021/acsanm.9b00706

Sulfonated poly(arylene ether)s based proton exchange membranes for fuel cells

Minghan Xu, Hao Xue, Qingfu Wang and Lichao Jia

International Journal of Hydrogen Energy, 2021, 46, 31727
DOI: 10.1016/j.ijhydene.2021.07.038

Inkjet printing technique for membrane fabrication and modification: A review

Chen Wang, Myoung Jun Park, Young Woo Choo, Yuhan Huang, Sherub Phuntsho and Ho Kyong Shon

Desalination, 2023, 565, 116841
DOI: 10.1016/j.desal.2023.116841

Novel Fabrication Approach by Reversely Coating a Nafion Ionomer on Gas Diffusion Electrodes for High-Performance Membrane Electrode Assemblies

Zhuoqun Li, Yijing Xing, Lei Liu, Yifan Li, Zhiyong Fu and Haibin Li

Energy Fuels, 2022, 36, 13873
DOI: 10.1021/acs.energyfuels.2c02917

Catalyst layers for fluorine‐free hydrocarbon PEMFCs

Emmanuel Balogun, Peter Mardle, Hien Nguyen, Matthias Breitwieser and Steven Holdcroft

Electrochimica Acta, 2022, 401, 139479
DOI: 10.1016/j.electacta.2021.139479

Engineering membrane electrode assembly for advanced polymer electrolyte water electrolyzer

Heming Liu, Xin Kang, Taifeng Zhao, Zhiyuan Zhang, Shiyu Ge, Shuqi Hu, Yuting Luo, Fengning Yang, Shao-Hai Li, Chenghua Sun, Qiangmin Yu, Hui-Ming Cheng and Bilu Liu

Sci. China Mater., 2022, 65, 3243
DOI: 10.1007/s40843-022-2128-4

Proton exchange membranes for polymer electrolyte fuel cells: An analysis of perfluorosulfonic acid and aromatic hydrocarbon ionomers

Pablo A. García-Salaberri

Sustainable Materials and Technologies, 2023, 38, e00727
DOI: 10.1016/j.susmat.2023.e00727

Thermal management challenges in hybrid-electric propulsion aircraft

Majid Asli, Paul König, Dikshant Sharma, Evangelia Pontika, Jon Huete, Karunakar Reddy Konda, Akilan Mathiazhagan, Tianxiao Xie, Klaus Höschler and Panagiotis Laskaridis

Progress in Aerospace Sciences, 2024, 144, 100967
DOI: 10.1016/j.paerosci.2023.100967

Donnan Membrane Process for the Selective Recovery and Removal of Target Metal Ions—A Mini Review

Dennis Asante-Sackey, Sudesh Rathilal, Emmanuel Kweinor Tetteh, Elorm Obotey Ezugbe and Lingham V. Pillay

Membranes, 2021, 11, 358
DOI: 10.3390/membranes11050358

A Review on Most Recent Development of Electrode Structures for Proton Exchange Membrane Fuel Cell Application with Upcoming Prospects

Kawsar Ahmed, Md. Abdus Salam, Md. Aftab Ali Shaikh, Dhinesh Kumar Murugaiah, Samaneh Shahgaldi and Mirza Nusrat Sweety

ACS Appl. Energy Mater., 2024, 7, 9052
DOI: 10.1021/acsaem.4c01528

Precise Control of the Preparation of Proton Exchange Membranes via Direct Electrostatic Deposition

Hao Liu, Runmin Tian, Chunxu Liu, Jinghan Zhang, Mingwei Tian, Xin Ning, Xingyou Hu and Hang Wang

Polymers, 2022, 14, 3975
DOI: 10.3390/polym14193975

Improved Pt-utilization efficiency of low Pt-loading PEM fuel cell electrodes using direct membrane deposition

Matthias Breitwieser, Matthias Klingele, Benjamin Britton, Steven Holdcroft, Roland Zengerle and Simon Thiele

Electrochemistry Communications, 2015, 60, 168
DOI: 10.1016/j.elecom.2015.09.006

Production of Liquid Solar Fuels and Their Use in Fuel Cells

Shunichi Fukuzumi

Joule, 2017, 1, 689
DOI: 10.1016/j.joule.2017.07.007

Preparation of an Integrated Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells Using a Novel Wet-Bonding Strategy

Yijing Xing, Lei Liu, Zhiyong Fu, Yifan Li and Haibin Li

Energy Fuels, 2023, 37, 12360
DOI: 10.1021/acs.energyfuels.3c01800

Fabrication of a Carbon Paper/Polyaniline-Copper Hybrid and Its Utilization as an Air Cathode for Microbial Fuel Cells

Jayesh M. Sonawane, Deepak Pant, Prakash C. Ghosh and Samuel B. Adeloju

ACS Appl. Energy Mater., 2019, 2, 1891
DOI: 10.1021/acsaem.8b02017

Porous Nafion membranes

Dickson Joseph, Julian Büsselmann, Corinna Harms, Dirk Henkensmeier, Mikkel Juul Larsen, Alexander Dyck, Jong Hyun Jang, Hyoung-Juhn Kim and Suk Woo Nam

Journal of Membrane Science, 2016, 520, 723
DOI: 10.1016/j.memsci.2016.08.025

Enhancing direct methanol fuel cell performance with synergistic multiscale patterned membrane design

Sanghyeok Lee, Yeram Shin, Chang Jin Lee, Soonyong So, Sungjun Kim and Segeun Jang

Journal of Industrial and Engineering Chemistry, 2025
DOI: 10.1016/j.jiec.2025.03.055

Spray-painted graphene oxide membrane fuel cells

T. Bayer, R. Selyanchyn, S. Fujikawa, K. Sasaki and S.M. Lyth

Journal of Membrane Science, 2017, 541, 347
DOI: 10.1016/j.memsci.2017.07.012

Nafion Matrix and Ionic Domain Tuning for High‐Performance Composite Proton Exchange Membranes

Keenan Smith, Fabrizia Foglia, Adam J. Clancy, Dan J. L. Brett and Thomas S. Miller

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202304061

Simplified All‐Solid‐State WO3 Based Electrochromic Devices on Single Substrate: Toward Large Area, Low Voltage, High Contrast, and Fast Switching Dynamics

Pierluigi Cossari, Marco Pugliese, Cataldo Simari, Alessio Mezzi, Vincenzo Maiorano, Isabella Nicotera and Giuseppe Gigli

Adv Materials Inter, 2020, 7
DOI: 10.1002/admi.201901663

Directly coated membrane electrode assemblies for proton exchange membrane water electrolysis

Peter Holzapfel, Melanie Bühler, Chuyen Van Pham, Friedemann Hegge, Thomas Böhm, David McLaughlin, Matthias Breitwieser and Simon Thiele

Electrochemistry Communications, 2020, 110, 106640
DOI: 10.1016/j.elecom.2019.106640

Electrospun sulfonated poly(ether ketone) nanofibers as proton conductive reinforcement for durable Nafion composite membranes

Carolin Klose, Matthias Breitwieser, Severin Vierrath, Matthias Klingele, Hyeongrae Cho, Andreas Büchler, Jochen Kerres and Simon Thiele

Journal of Power Sources, 2017, 361, 237
DOI: 10.1016/j.jpowsour.2017.06.080

Effect of cell compression on the performance of a non–hot‐pressed MEA for PEMFC

Naveen K. Shrivastava, Abheek Chatterjee and Tequila A.L. Harris

Int J Energy Res, 2020, 44, 370
DOI: 10.1002/er.4933

Performance of an ePTFE-Reinforced Membrane Electrode Assembly for Proton-Exchange Membrane Fuel Cells

Yijing Xing, Lei Liu, Zhuoqun Li, Yifan Li, Zhiyong Fu and Haibin Li

Energy Fuels, 2022, 36, 11177
DOI: 10.1021/acs.energyfuels.2c01974

Design Considerations for the Electrical Power Supply of Future Civil Aircraft with Active High-Lift Systems

J.-K. Mueller, A. Bensmann, B. Bensmann, T. Fischer, T. Kadyk, G. Narjes, F. Kauth, B. Ponick, J. Seume, U. Krewer, R. Hanke-Rauschenbach and A. Mertens

Energies, 2018, 11, 179
DOI: 10.3390/en11010179

Improving the Durability and Performance of Sulfonated Poly(arylene ether)s by Introducing 9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide Structure for Fuel Cell Application

Hyeon-Ho Kang and Dong-Hoon Lee

ACS Omega, 2021, 6, 35315
DOI: 10.1021/acsomega.1c04205

Artificial intelligence-based multi-objective optimisation for proton exchange membrane fuel cell: A literature review

Zhiming Feng, Jian Huang, Shan Jin, Guanqi Wang and Yi Chen

Journal of Power Sources, 2022, 520, 230808
DOI: 10.1016/j.jpowsour.2021.230808

A fully spray-coated fuel cell membrane electrode assembly using Aquivion ionomer with a graphene oxide/cerium oxide interlayer

Matthias Breitwieser, Thomas Bayer, Andreas Büchler, Roland Zengerle, Stephen M. Lyth and Simon Thiele

Journal of Power Sources, 2017, 351, 145
DOI: 10.1016/j.jpowsour.2017.03.085

Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance

Zhepeng Tang, Qiu-An Huang, Yan-Jie Wang, Fangzhou Zhang, Weiheng Li, Aijun Li, Lei Zhang and Jiujun Zhang

Journal of Power Sources, 2020, 468, 228361
DOI: 10.1016/j.jpowsour.2020.228361

Water management in novel direct membrane deposition fuel cells under low humidification

M. Breitwieser, R. Moroni, J. Schock, M. Schulz, B. Schillinger, F. Pfeiffer, R. Zengerle and S. Thiele

International Journal of Hydrogen Energy, 2016, 41, 11412
DOI: 10.1016/j.ijhydene.2016.05.018

A critical review and commentary on recent progress of additive manufacturing and its impact on membrane technology

Xin Qian, Mayur Ostwal, Ayse Asatekin, Geoffrey M. Geise, Zachary P. Smith, William A. Phillip, Ryan P. Lively and Jeffrey R. McCutcheon

Journal of Membrane Science, 2022, 645, 120041
DOI: 10.1016/j.memsci.2021.120041

High-performance SPEEK/SWCNT/fly ash polymer electrolyte nanocomposite membranes for fuel cell applications

Gandhimathi Sivasubramanian, Krishnan Hariharasubramanian, Paradesi Deivanayagam and Jeyalakshmi Ramaswamy

Polym J, 2017, 49, 703
DOI: 10.1038/pj.2017.38

Design and fabrication of a quick-fit architecture air breathing direct methanol fuel cell

Bincy George Abraham and Raghuram Chetty

International Journal of Hydrogen Energy, 2021, 46, 6845
DOI: 10.1016/j.ijhydene.2020.11.184

Evaluating Electrocatalysts at Relevant Currents in a Half-Cell: The Impact of Pt Loading on Oxygen Reduction Reaction

Konrad Ehelebe, Dominik Seeberger, Mike T. Y. Paul, Simon Thiele, Karl J. J. Mayrhofer and Serhiy Cherevko

J. Electrochem. Soc., 2019, 166, F1259
DOI: 10.1149/2.0911915jes

The fabrication of integrated proton exchange membrane fuel cells: Excellent mechanical strength and electrochemical performance

Zhaoqi Ji, Yihao Huang, Qi Chen, Jinzhong An, Dong Hao, Zhaojie Shen, Conggan Ma and Yanyan Wang

International Journal of Hydrogen Energy, 2024, 65, 158
DOI: 10.1016/j.ijhydene.2024.04.009

Control of self-organization of drop-casted Nafion film for improving proton conduction in a polymer-electrolyte-membrane fuel cell to raise its output power density

Ching-Hsien Lin, Hao-Hsuan Chen, Kai-Yu Zhan, Szu-yuan Chen and Chung-Jen Tseng

International Journal of Hydrogen Energy, 2023, 48, 26609
DOI: 10.1016/j.ijhydene.2022.11.031

Short-Side-Chain Membranes with Stabilized Superacid on Graphitic Carbon Nitride for Polymer Electrolyte Fuel Cells under Low-Humidity Conditions

Punnappadam Rajan Suraj, Maniprakundil Neeshma and Santoshkumar D. Bhat

ACS Appl. Mater. Interfaces, 2025, 17, 11971
DOI: 10.1021/acsami.4c17363

An ePTFE-reinforced membrane electrode assembly based on a wet-contact interface design strategy for high-performance proton exchange membrane fuel cells

Lei Liu, Yijing Xing, Zhiyong Fu, Yifan Li, Zhuoqun Li and Haibin Li

Journal of Power Sources, 2023, 575, 233221
DOI: 10.1016/j.jpowsour.2023.233221

Engineering Catalyst Layers for Next‐Generation Polymer Electrolyte Fuel Cells: A Review of Design, Materials, and Methods

Theo A. M. Suter, Keenan Smith, Jennifer Hack, Lara Rasha, Zahra Rana, Gyen Ming A. Angel, Paul R. Shearing, Thomas S. Miller and Dan J. L. Brett

Advanced Energy Materials, 2021, 11
DOI: 10.1002/aenm.202101025

Directly‐Deposited Ultrathin Solid Polymer Electrolyte for Enhanced CO2 Electrolysis

Muflih A. Adnan, Ali Shayesteh Zeraati, Shariful Kibria Nabil, Tareq A. Al‐Attas, Karthick Kannimuthu, Cao‐Thang Dinh, Ian D. Gates and Md Golam Kibria

Advanced Energy Materials, 2023, 13
DOI: 10.1002/aenm.202203158

A High-Performance Membrane Electrode Assembly with an Ultrathin Proton Exchange Membrane Based on a Wet-Combining Interface Forming Strategy

Lei Liu, Zhiyong Fu, Yijing Xing, Yifan Li, Zhuoqun Li and Haibin Li

Energy Fuels, 2023, 37, 14315
DOI: 10.1021/acs.energyfuels.3c02168

Insight on Single Cell Proton Exchange Membrane Fuel Cell Performance of Pt-Cu/C Cathode

Marjan Bele, Matija Gatalo, Primož Jovanovič, Francisco Ruiz-Zepeda, Martin Šala, Ervin Šest, Nejc Hodnik, Stanko Hočevar, Irene Gatto, Ada Saccà, Antonino S. Aricò and Miran Gaberšček

Catalysts, 2019, 9, 544
DOI: 10.3390/catal9060544

Effect of the MEA design on the performance of PEMWE single cells with different sizes

Christoph Immerz, Martin Paidar, Georgios Papakonstantinou, Boris Bensmann, Tomas Bystron, Tanja Vidakovic-Koch, Karel Bouzek, Kai Sundmacher and Richard Hanke-Rauschenbach

J Appl Electrochem, 2018, 48, 701
DOI: 10.1007/s10800-018-1178-2

Doped, Defect‐Enriched Carbon Nanotubes as an Efficient Oxygen Reduction Catalyst for Anion Exchange Membrane Fuel Cells

Chuyen Van Pham, Benjamin Britton, Thomas Böhm, Steven Holdcroft and Simon Thiele

Adv Materials Inter, 2018, 5
DOI: 10.1002/admi.201800184

Robust three‐dimensionally printed polypropylene/highly sulfonated polysulfone composites for potential applications in fuel cells

Maryam Mohammadi and Shahram Mehdipour‐Ataei

Int J Energy Res, 2021, 45, 4224
DOI: 10.1002/er.6086

A novel energy storage system incorporating electrically rechargeable liquid fuels as the storage medium

Haoran Jiang, Lei Wei, Xinzhuang Fan, Jianbo Xu, Wei Shyy and Tianshou Zhao

Science Bulletin, 2019, 64, 270
DOI: 10.1016/j.scib.2019.01.014

Inkjet Printed Double-Layered Cathodes for PEM Fuel Cells

Carlos André Gomes Bezerra, L. Jay Deiner and Germano Tremiliosi-Filho

J. Electrochem. Soc., 2020, 167, 124503
DOI: 10.1149/1945-7111/aba6ca

Toward revolutionizing PEMFC manufacturing for clean energy conversion: a review on the innovative contribution of 3D printing techniques

Randa E. Khalifa, Asmaa A. Shalaby and Zdenko Špitalský

Int J Adv Manuf Technol, 2024, 135, 4119
DOI: 10.1007/s00170-024-14764-5

Analysis and Design of Fuel Cell Systems for Aviation

Thomas Kadyk, Christopher Winnefeld, Richard Hanke-Rauschenbach and Ulrike Krewer

Energies, 2018, 11, 375
DOI: 10.3390/en11020375

Additive manufacturing for Proton Exchange Membrane (PEM) hydrogen technologies: merits, challenges, and prospects

Ahmad Baroutaji, Arun Arjunan, John Robinson, Mohammad Ali Abdelkareem and Abdul-Ghani Olabi

International Journal of Hydrogen Energy, 2024, 52, 561
DOI: 10.1016/j.ijhydene.2023.07.033

Advances in membranes and electrocatalysts to optimize proton-exchange membrane fuel cells

Naeimeh Rajabalizadeh Mojarrad, Ahmet Can Kırlıoğlu, Burak Ölmez, Ali Ansari Hamedani, Merve Buldu-Akturk, Mohammed Ahmed Zabara, Alp Yürüm, Cengiz S. Ozkan, Selmiye Alkan Gürsel, Begüm Yarar Kaplan and Mihrimah Ozkan

Cell Reports Physical Science, 2025, 102728
DOI: 10.1016/j.xcrp.2025.102728

Advances of high-performance and stable finely-ordered patterned membrane for proton exchange membrane fuel cell applications

Yalin Zhang, Fang Liu, Jing Shan, Xue Zhang, Xiaoyan Wu and Zhongjun Hou

Journal of Power Sources, 2024, 595, 234053
DOI: 10.1016/j.jpowsour.2024.234053

External reinforcement of hydrocarbon membranes by a three-dimensional interlocking interface for mechanically durable polymer electrolyte membrane fuel cells

Seongmin Yuk, Jinok Yuk, Tae-Ho Kim, Young Taik Hong, Dong-Hyun Lee, Jonghyun Hyun, Sungyu Choi, Gisu Doo, Dong Wook Lee and Hee-Tak Kim

Journal of Power Sources, 2019, 415, 44
DOI: 10.1016/j.jpowsour.2019.01.048

Ion exchange membrane related processes towards carbon capture, utilization and storage: Current trends and perspectives

Huangying Wang, Junying Yan, Wanjie Song, Chenxiao Jiang, Yaoming Wang and Tongwen Xu

Separation and Purification Technology, 2022, 296, 121390
DOI: 10.1016/j.seppur.2022.121390

Anode Engineering for Proton Exchange Membrane Water Electrolyzers

Chang Qiu, Zikai Xu, Feng-Yang Chen and Haotian Wang

ACS Catal., 2024, 14, 921
DOI: 10.1021/acscatal.3c05162

Nanostructure Engineering of Cathode Layers in Proton Exchange Membrane Fuel Cells: From Catalysts to Membrane Electrode Assembly

Bolong Yang and Zhonghua Xiang

ACS Nano, 2024, 18, 11598
DOI: 10.1021/acsnano.4c01113

Double-Layer ePTFE-Reinforced Membrane Electrode Assemblies Prepared by a Reverse Membrane Deposition Process for High-Performance and Durable Proton Exchange Membrane Fuel Cells

Lei Liu, Zhiyong Fu, Yijing Xing, Yifan Li, Xinyi Zhou, Zhuoqun Li and Haibin Li

ACS Appl. Mater. Interfaces, 2023, 15, 30281
DOI: 10.1021/acsami.3c04802

Double-Layer Expanded Polytetrafluoroethylene Reinforced Membranes with Cerium Oxide Radical Scavengers for Highly Stable Proton Exchange Membrane Fuel Cells

Lei Liu, Yijing Xing, Yifan Li, Zhiyong Fu, Zhuoqun Li and Haibin Li

ACS Appl. Energy Mater., 2022, 5, 8743
DOI: 10.1021/acsaem.2c01263

Proton-Conducting Graphene Membrane Electrode Assembly for High Performance Hydrogen Fuel Cells

Ravikumar Thimmappa, Manu Gautam, Mruthyunjayachari Chattanahalli Devendrachari, Alagar Raja Kottaichamy, Zahid Manzoor Bhat, Ahmed Umar and Musthafa Ottakam Thotiyl

ACS Sustainable Chem. Eng., 2019, 7, 14189
DOI: 10.1021/acssuschemeng.9b02917

Recent advancements in high performance polymer electrolyte fuel cell electrode fabrication – Novel materials and manufacturing processes

M. Grandi, S. Rohde, D.J. Liu, B. Gollas and V. Hacker

Journal of Power Sources, 2023, 562, 232734
DOI: 10.1016/j.jpowsour.2023.232734

Direct Membrane Deposition for CO2 Electrolysis

Tartela Alkayyali, Ali S. Zeraati, Harrison Mar, Fatemeh Arabyarmohammadi, Sepehr Saber, Rui K. Miao, Colin P. O’Brien, Hanshuo Liu, Zhong Xie, Guangyu Wang, Edward H. Sargent, Nana Zhao and David Sinton

ACS Energy Lett., 2023, 8, 4674
DOI: 10.1021/acsenergylett.3c01716

A completely spray-coated membrane electrode assembly

Matthias Klingele, Benjamin Britton, Matthias Breitwieser, Severin Vierrath, Roland Zengerle, Steven Holdcroft and Simon Thiele

Electrochemistry Communications, 2016, 70, 65
DOI: 10.1016/j.elecom.2016.06.017

Effect of the corrugated bipolar plate design on the self‐humidification of a high power density PEMFC stack for UAVs

Sergey I. Nefedkin, Mariya A. Klimova, Vasiliy S. Glasov, Vladislav I. Pavlov and Yuriy V. Tolmachev

Fuel Cells, 2021, 21, 234
DOI: 10.1002/fuce.202000163

Self-Standing, Ultrasonic Spray-Deposited Membranes for Fuel Cells

Ali Karaca, Irina Galkina, Yoo Jung Sohn, Klaus Wippermann, Fabian Scheepers, Andreas Glüsen, Meital Shviro, Martin Müller, Marcelo Carmo and Detlef Stolten

Membranes, 2023, 13, 522
DOI: 10.3390/membranes13050522

Proton Exchange Membrane Water Splitting: Advances in Electrode Structure and Mass‐Charge Transport Optimization

Wenting Feng, Bin Chang, Yuanfu Ren, Debin Kong, Hua Bing Tao, Linjie Zhi, Mohd Adnan Khan, Rashed Aleisa, Magnus Rueping and Huabin Zhang

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202416012

Heterogeneous Monolithic Integration of Single‐Crystal Organic Materials

Kyung Sun Park, Jangmi Baek, Yoonkyung Park, Lynn Lee, Jinho Hyon, Yong‐Eun Koo Lee, Nabeen K. Shrestha, Youngjong Kang and Myung Mo Sung

Advanced Materials, 2017, 29
DOI: 10.1002/adma.201603285

Research progress of catalyst layer and interlayer interface structures in membrane electrode assembly (MEA) for proton exchange membrane fuel cell (PEMFC) system

Ming Chen, Chen Zhao, Fengman Sun, Jiantao Fan, Hui Li and Haijiang Wang

eTransportation, 2020, 5, 100075
DOI: 10.1016/j.etran.2020.100075

Bottom-Up Fabrication of Oxygen Reduction Electrodes with Atomic Layer Deposition for High-Power-Density PEMFCs

Samuel M. Dull, Shicheng Xu, Timothy Goh, Dong Un Lee, Drew Higgins, Marat Orazov, David M. Koshy, Per Erik Vullum, Sebastian Kirsch, Gerold Huebner, Jan Torgersen, Thomas F. Jaramillo and Fritz B. Prinz

Cell Reports Physical Science, 2021, 2, 100297
DOI: 10.1016/j.xcrp.2020.100297

Differences in the Electrochemical Performance of Pt-Based Catalysts Used for Polymer Electrolyte Membrane Fuel Cells in Liquid Half- and Full-Cells

Chi-Yeong Ahn, Ji Eun Park, Sungjun Kim, Ok-Hee Kim, Wonchan Hwang, Min Her, Sun Young Kang, SungBin Park, Oh Joong Kwon, Hyun S. Park, Yong-Hun Cho and Yung-Eun Sung

Chem. Rev., 2021, 121, 15075
DOI: 10.1021/acs.chemrev.0c01337

An asymmetric membrane electrode assembly for high-performance proton exchange membrane fuel cells

Yizhe Li, Lei Liu, Yijing Xing and Guichen Zhang

International Journal of Hydrogen Energy, 2024, 55, 357
DOI: 10.1016/j.ijhydene.2023.11.280

Recent advances in Pt catalysts and membrane electrode assemblies fabrication for proton exchange membrane fuel cells

Miao Ma, Li-Xiao Shen, Jing Liu, Bin Xu, Yun-Long Zhang, Lei Zhao and Zhen-Bo Wang

Rare Met., 2024, 43, 4198
DOI: 10.1007/s12598-024-02698-6

Rapid prototyping methods for the manufacture of fuel cells

Piotr Dudek, Andrzej Raźniak, Bartłomiej Lis, M. Filipowicz, M. Dudek, T. Olkuski and K. Styszko

E3S Web Conf., 2016, 10, 00127
DOI: 10.1051/e3sconf/20161000127

Phosphonic acid functionalized poly(pentafluorostyrene) as polyelectrolyte membrane for fuel cell application

Vladimir Atanasov, Andrey Oleynikov, Jiabing Xia, Sandrine Lyonnard and Jochen Kerres

Journal of Power Sources, 2017, 343, 364
DOI: 10.1016/j.jpowsour.2017.01.085

Bridging the gap between highly active oxygen reduction reaction catalysts and effective catalyst layers for proton exchange membrane fuel cells

Jiantao Fan, Ming Chen, Zhiliang Zhao, Zhen Zhang, Siyu Ye, Shaoyi Xu, Haijiang Wang and Hui Li

Nat Energy, 2021, 6, 475
DOI: 10.1038/s41560-021-00824-7

Influence of Equivalent Weight of Ionomer on Proton Conduction Behavior in Fuel Cell Catalyst Layers

Shuiyun Shen, Aidi Han, Xiaohui Yan, Junren Chen, Xiaojing Cheng and Junliang Zhang

J. Electrochem. Soc., 2019, 166, F724
DOI: 10.1149/2.0451912jes