Synergistic single process additive manufacturing of hydro-responsive Ag nanoparticle composites by digital visible light processing 3D printing

Sokhna I. Y. Diouf, Darrick J. Williams, Alejandra Londoño-Calderon, Michael T. Pettes, Sönke Seifert and Millicent A. Firestone

Mater. Adv., 2020, 1, 2219
DOI: 10.1039/D0MA00549E

Vat photopolymerization 3D printed microfluidic devices for organ-on-a-chip applications

Laura A. Milton, Matthew S. Viglione, Louis Jun Ye Ong, Gregory P. Nordin and Yi-Chin Toh

Lab Chip, 2023, 23, 3537
DOI: 10.1039/D3LC00094J

Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices

Jia Ming Zhang, Andres A. Aguirre-Pablo, Er Qiang Li, Ulrich Buttner and Sigurdur T. Thoroddsen

RSC Adv., 2016, 6, 81120
DOI: 10.1039/C6RA11724D

Microwave-assisted organosolv extraction for more native-like lignin and its application as a property-enhancing filler in a light processable biobased resin

Jenevieve Yao, Maria Karlsson, Martin Lawoko, Karin Odelius and Minna Hakkarainen

RSC Sustainability, 2023, 1, 1211
DOI: 10.1039/D3SU00115F

3D printed integrated nanoporous membranes for electroextraction of DNA

Hari Kalathil Balakrishnan, Soo Min Lee, Ludovic F. Dumée, Egan H. Doeven, Richard Alexander, Dan Yuan and Rosanne M. Guijt

Nanoscale, 2023, 15, 10371
DOI: 10.1039/D2NR07178A

Simple modification to allow high-efficiency and high-resolution multi-material 3D-printing fabrication of microfluidic devices

Reverson Fernandes Quero, Dosil Pereira de Jesus and José Alberto Fracassi da Silva

Lab Chip, 2023, 23, 3694
DOI: 10.1039/D3LC00356F

3D printed microfluidic devices with electrodes for electrochemical analysis

Major A. Selemani, Khamhbawihum Cenhrang, Samuel Azibere, Mariama Singhateh and R. Scott Martin

Anal. Methods, 2024, 16, 6941
DOI: 10.1039/D4AY01701C

Multiscale 3D-printing of microfluidic AFM cantilevers

Robert C. L. N. Kramer, Eleonoor J. Verlinden, Livia Angeloni, Anita van den Heuvel, Lidy E. Fratila-Apachitei, Silvère M. van der Maarel and Murali K. Ghatkesar

Lab Chip, 2020, 20, 311
DOI: 10.1039/C9LC00668K

Toward 3D printed microfluidic artificial lungs for respiratory support

Elyse Fleck, Charlise Keck, Karolina Ryszka, Andrew Zhang, Michael Atie, Sydney Maddox and Joseph Potkay

Lab Chip, 2024, 24, 955
DOI: 10.1039/D3LC00814B

Point-of-care testing: applications of 3D printing

Ho Nam Chan, Ming Jun Andrew Tan and Hongkai Wu

Lab Chip, 2017, 17, 2713
DOI: 10.1039/C7LC00397H

Investigation and comparison of resin materials in transparent DLP-printing for application in cell culture and organs-on-a-chip

Anna Fritschen, Alena K. Bell, Inga Königstein, Lukas Stühn, Robert W. Stark and Andreas Blaeser

Biomater. Sci., 2022, 10, 1981
DOI: 10.1039/D1BM01794B

Trends in additively manufactured microfluidics, microreactors and catalytic materials

Andrea Rogolino and Gianpaolo Savio

Mater. Adv., 2021, 2, 845
DOI: 10.1039/D0MA00704H

Voxel based method for predictive modelling of solidification and stress in digital light processing based additive manufacture

Andrew Reid, Joseph C. Jackson and J. F. C. Windmill

Soft Matter, 2021, 17, 1881
DOI: 10.1039/D0SM01968B

Blue laser diode-initiated photosensitive resins for 3D printing

Ke-Jian Cui, Cai-Zhen Zhu, Huan Zhang, Qin Xuan, Wei-Zhi Zou, Zhi-Yan Zhang, Xue-Chun Lin, Ning Zhao and Jian Xu

J. Mater. Chem. C, 2017, 5, 12035
DOI: 10.1039/C7TC04303A

Imaging and characterizing fluid invasion in micro-3D printed porous devices with variable surface wettability

HongXia Li and TieJun Zhang

Soft Matter, 2019, 15, 6978
DOI: 10.1039/C9SM01182J

3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels

Dishit P. Parekh, Collin Ladd, Lazar Panich, Khalil Moussa and Michael D. Dickey

Lab Chip, 2016, 16, 1812
DOI: 10.1039/C6LC00198J

Phosphorescent bio-based resin for digital light processing (DLP) 3D-printing

Mirko Maturi, Carolina Pulignani, Erica Locatelli, Veronica Vetri Buratti, Silvia Tortorella, Letizia Sambri and Mauro Comes Franchini

Green Chem., 2020, 22, 6212
DOI: 10.1039/D0GC01983F

A 3D-printed multi-compartment organ-on-chip platform with a tubing-free pump models communication with the lymph node

Sophie R. Cook, Alexander G. Ball, Anwaruddin Mohammad and Rebecca R. Pompano

Lab Chip, 2025, 25, 155
DOI: 10.1039/D4LC00489B

The upcoming 3D-printing revolution in microfluidics

Nirveek Bhattacharjee, Arturo Urrios, Shawn Kang and Albert Folch

Lab Chip, 2016, 16, 1720
DOI: 10.1039/C6LC00163G

Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels

Hua Gong, Bryce P. Bickham, Adam T. Woolley and Gregory P. Nordin

Lab Chip, 2017, 17, 2899
DOI: 10.1039/C7LC00644F

High density 3D printed microfluidic valves, pumps, and multiplexers

Hua Gong, Adam T. Woolley and Gregory P. Nordin

Lab Chip, 2016, 16, 2450
DOI: 10.1039/C6LC00565A

3D printed microfluidic devices: enablers and barriers

Sidra Waheed, Joan M. Cabot, Niall P. Macdonald, Trevor Lewis, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Lab Chip, 2016, 16, 1993
DOI: 10.1039/C6LC00284F

High-resolution low-cost LCD 3D printing for microfluidics and organ-on-a-chip devices

Houda Shafique, Vahid Karamzadeh, Geunyong Kim, Molly L. Shen, Yonatan Morocz, Ahmad Sohrabi-Kashani and David Juncker

Lab Chip, 2024, 24, 2774
DOI: 10.1039/D3LC01125A

Pressurized photobonding for 3D-printed inertial and droplet microfluidics

Vivek Rajasenan, Edwin Sanchez Ochoa, Aiden Begole, Amrith Karunaratne, Lisa F. Horowitz, Albert Folch and Dino Di Carlo

Lab Chip, 2025, 25, 5663
DOI: 10.1039/D5LC00433K

High-performance 3D printing UV-curable resins derived from soybean oil and gallic acid

Guoqiang Zhu, Jinshuai Zhang, Jia Huang, Xixi Yu, Jianwen Cheng, Qianqian Shang, Yun Hu, Chengguo Liu, Lihong Hu and Yonghong Zhou

Green Chem., 2021, 23, 5911
DOI: 10.1039/D1GC01934A

Immunoaffinity monoliths for multiplexed extraction of preterm birth biomarkers from human blood serum in 3D printed microfluidic devices

Haifa M. Almughamsi, Makella K. Howell, Samuel R. Parry, Joule E. Esene, Jacob B. Nielsen, Gregory P. Nordin and Adam T. Woolley

Analyst, 2022, 147, 734
DOI: 10.1039/D1AN01365C

3D printed high density, reversible, chip-to-chip microfluidic interconnects

Hua Gong, Adam T. Woolley and Gregory P. Nordin

Lab Chip, 2018, 18, 639
DOI: 10.1039/C7LC01113J

Additive manufacturing of glass with nanoscale features: recent progress and prospects

Kefan Guo, Yiling Lian, Juzheng Chen, Shiyu Ma, Yu Chen and Yang Lu

Nanoscale, 2026, 18, 5092
DOI: 10.1039/D5NR05425G

Engineering long-term controlled drug release from biodegradable devices 3D printed with vat polymerization

Hafiz Busari, O. Thompson Mefford and M. Aaron Vaughn

J. Mater. Chem. B, 2025, 13, 6456
DOI: 10.1039/D5TB00456J

Solvent-free and photocurable polyimide inks for 3D printing

Yuxiong Guo, Zhongying Ji, Yun Zhang, Xiaolong Wang and Feng Zhou

J. Mater. Chem. A, 2017, 5, 16307
DOI: 10.1039/C7TA01952A

Functional angiogenesis requires microenvironmental cues balancing endothelial cell migration and proliferation

William Y. Wang, Daphne Lin, Evan H. Jarman, William J. Polacheck and Brendon M. Baker

Lab Chip, 2020, 20, 1153
DOI: 10.1039/C9LC01170F

3D-printing of transparent bio-microfluidic devices in PEG-DA

Arturo Urrios, Cesar Parra-Cabrera, Nirveek Bhattacharjee, Alan M. Gonzalez-Suarez, Luis G. Rigat-Brugarolas, Umashree Nallapatti, Josep Samitier, Cole A. DeForest, Francesc Posas, José L. Garcia-Cordero and Albert Folch

Lab Chip, 2016, 16, 2287
DOI: 10.1039/C6LC00153J

Engineering 3D parallelized microfluidic droplet generators with equal flow profiles by computational fluid dynamics and stereolithographic printing

Tom Kamperman, Liliana Moreira Teixeira, Seyedeh Sarah Salehi, Greet Kerckhofs, Yann Guyot, Mike Geven, Liesbet Geris, Dirk Grijpma, Sebastien Blanquer and Jeroen Leijten

Lab Chip, 2020, 20, 490
DOI: 10.1039/C9LC00980A

Quality assurance of stereolithography based biocompatible materials for dental applications

Amogh V Krishna, Vijeth V Reddy, Dyall W Dexter, Dan-Åke Wälivaara, Peter Abrahamsson, B-G Rosen and Jonas Anderud

Surf. Topogr.: Metrol. Prop., 2023, 11, 014008
DOI: 10.1088/2051-672X/acbe54

A study on the dynamics of bacterial growth using biocompatible 3D-printed microfluidic device

Amlan Ashish, Poulomi Biswas, Brateen Datta, Chiranjeevi Kanike, Arnab Atta and Gorachand Dutta

Chemical Engineering Journal, 2024, 493, 152687
DOI: 10.1016/j.cej.2024.152687

High Resolution Dual Material Stereolithography for Monolithic Microdevices

Christina Schmidleithner, Rujing Zhang, Nayere Taebnia, Esben K. U. Larsen, Kristoffer Almdal and Niels B. Larsen

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202101180

Advancements and challenges in SLA-based microfluidic devices for organ-on-chip applications

Francisca Barbosa, Paula Coutinho, Maximiano P. Ribeiro, André F. Moreira, Luís M. Lourenço and Sónia P. Miguel

Materials & Design, 2025, 256, 114254
DOI: 10.1016/j.matdes.2025.114254

Advances in monoliths and related porous materials for microfluidics

Radim Knob, Vishal Sahore, Mukul Sonker and Adam T. Woolley

Biomicrofluidics, 2016, 10
DOI: 10.1063/1.4948507

3D-printed miniaturized fluidic tools in chemistry and biology

C.K. Dixit, K. Kadimisetty and J. Rusling

TrAC Trends in Analytical Chemistry, 2018, 106, 37
DOI: 10.1016/j.trac.2018.06.013

Compact retarding potential analyzers enabled by glass-ceramic vat polymerization for CubeSat and laboratory plasma diagnostics

Javier Izquierdo-Reyes, Zoey Bigelow, Nicholas K. Lubinsky and Luis Fernando Velásquez-García

Additive Manufacturing, 2022, 58, 103034
DOI: 10.1016/j.addma.2022.103034

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Zhiming Luo, Haoyue Zhang, Runze Chen, Hanting Li, Fang Cheng, Lijun Zhang, Jia Liu, Tiantian Kong, Yang Zhang and Huanan Wang

Microsyst Nanoeng, 2023, 9
DOI: 10.1038/s41378-023-00542-y

Hydrophilic silicone-based ink derived from amphiphilic siloxane oligomers for the vat photopolymerization printing of embedded-channel fluidic devices

Li Yan Wong, Sayan Ganguly and Xiaowu (Shirley) Tang

Additive Manufacturing, 2025, 100, 104691
DOI: 10.1016/j.addma.2025.104691

Recent Developments in 3D Printing of Droplet-Based Microfluidics

Adedamola D. Aladese and Heon-Ho Jeong

BioChip J, 2021, 15, 313
DOI: 10.1007/s13206-021-00032-1

Photopolymer Resins with Biobased Methacrylates Based on Soybean Oil for Stereolithography

Jarno Guit, Marjory B.L. Tavares, Jerzy Hul, Chongnan Ye, Katja Loos, Jan Jager, Rudy Folkersma and Vincent S.D. Voet

ACS Appl. Polym. Mater., 2020, 2, 949
DOI: 10.1021/acsapm.9b01143

A Facile and Green Microwave‐Assisted Strategy to Induce Surface Properties on Complex‐Shape Polymeric 3D Printed Structures

Gustavo Gonzalez, María Arévalo, Annalisa Chiappone, Enrique Martínez Campos, Candido Fabrizio Pirri, Ignazio Roppolo and Paula Bosch

Macro Materials & Eng, 2023, 308
DOI: 10.1002/mame.202300118

PolyJet Three‐dimensional‐Printed Microchip Devices With Integrated Carbon Electrodes for Neurotransmitter Analysis

Major A. Selemani, Jason L. Assafeen and R. Scott Martin

J of Separation Science, 2025, 48
DOI: 10.1002/jssc.70224

A hybrid modular microfluidic device for emulsion generation

Zhengyuan Zhou, Tiantian Kong, Hend Mkaouar, Khaled N. Salama and Jia Ming Zhang

Sensors and Actuators A: Physical, 2018, 280, 422
DOI: 10.1016/j.sna.2018.08.005

3D printed microfluidics and microelectronics

Ryan D. Sochol, Eric Sweet, Casey C. Glick, Sung-Yueh Wu, Chen Yang, Michael Restaino and Liwei Lin

Microelectronic Engineering, 2018, 189, 52
DOI: 10.1016/j.mee.2017.12.010

High-precision digital light processing (DLP) printing of microstructures for microfluidics applications based on a machine learning approach

Xinhui Wang, Jinghang Liu, Ruihai Dong, Michael D. Gilchrist and Nan Zhang

Virtual and Physical Prototyping, 2024, 19
DOI: 10.1080/17452759.2024.2318774

Fabrication of 3D-printed molds for polydimethylsiloxane-based microfluidic devices using a liquid crystal display-based vat photopolymerization process: printing quality, drug response and 3D invasion cell culture assays

Matthew D. Poskus, Tuo Wang, Yuxuan Deng, Sydney Borcherding, Jake Atkinson and Ioannis K. Zervantonakis

Microsyst Nanoeng, 2023, 9
DOI: 10.1038/s41378-023-00607-y

A ‘print–pause–print’ protocol for 3D printing microfluidics using multimaterial stereolithography

Yong Tae Kim, Alireza Ahmadianyazdi and Albert Folch

Nat Protoc, 2023, 18, 1243
DOI: 10.1038/s41596-022-00792-6

Simultaneously improving fabrication accuracy and interfacial bonding strength of multi-material projection stereolithography by multi-step exposure

Xinghong Deng, Guangyu Zhang, Yi Mo, Zhiyuan Huang, Dekai Zhou, Jing Qiao and Longqiu Li

International Journal of Smart and Nano Materials, 2024, 15, 387
DOI: 10.1080/19475411.2024.2349998

Macromolecular crystallization: basics and advanced methodologies

Hamid Cheraghian Radi, Behnam Hajipour-Verdom and Fatemeh Molaabasi

J IRAN CHEM SOC, 2021, 18, 543
DOI: 10.1007/s13738-020-02058-y

Feasible Digital Light Processing Three-Dimensional Printing of a Biodegradable Porous Polymer with a High Internal Phase Emulsion Structure

Won Jun Choi, Ki Seob Hwang, Yongsoo Kim, Chanmin Lee, Sung Hwan Ju, Hyuk Jun Kwon, Won-Gun Koh and Jun-Young Lee

ACS Appl. Polym. Mater., 2022, 4, 1570
DOI: 10.1021/acsapm.2c00013

High-resolution stereolithography: Negative spaces enabled by control of fluid mechanics

Ian A. Coates, William Pan, Max A. Saccone, Gabriel Lipkowitz, Dan Ilyin, Madison M. Driskill, Maria T. Dulay, Curtis W. Frank, Eric S. G. Shaqfeh and Joseph M. DeSimone

Proc. Natl. Acad. Sci. U.S.A., 2024, 121
DOI: 10.1073/pnas.2405382121

Adjusting the accuracy of PEGDA-GelMA vascular network by dark pigments via digital light processing printing

Lin Sheng, Mo Li, Shuxian Zheng and Jian Qi

J Biomater Appl, 2022, 36, 1173
DOI: 10.1177/08853282211053081

3D printing of low-cost, high-resolution open capillary microfluidics towards self-sustaining, long-term hydration of engineered living materials

Aileen Y. Sun, Carrie H. Lin, John A. Tatka, Kinsey Drake, Shannon Daily, Megan Castellanos, Alshakim Nelson and Ayokunle O. Olanrewaju

Prog Addit Manuf, 2025, 10, 7927
DOI: 10.1007/s40964-025-01081-w

Quantitative Determination of 3D-Printing and Surface-Treatment Conditions for Direct-Printed Microfluidic Devices

Hyun Namgung, Abdi Mirgissa Kaba, Hyeonkyu Oh, Hyunjin Jeon, Jeonghwan Yoon, Haseul Lee and Dohyun Kim

BioChip J, 2022, 16, 82
DOI: 10.1007/s13206-022-00048-1

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta and Subha N. Rath

Bio-des. Manuf., 2021, 4, 311
DOI: 10.1007/s42242-020-00112-5

Average-Accumulated Normalized Dose (A-AND) predicts ultimate tensile strength and elastic modulus of photopolymer printed by vat photopolymerization

Jiho Lee, Hoon Kim, Hyoungsoo Kim, Taehyub Lee, Jeong-Hwan Kim, Alberto Andreu, Sanglae Kim and Yong-Jin Yoon

Additive Manufacturing, 2022, 55, 102799
DOI: 10.1016/j.addma.2022.102799

Zinc oxide nanoparticles as additives for improved dimensional accuracy in vat photopolymerization

Chin Siang Ng, Alamelu Suriya Subramanian and Pei-Chen Su

Additive Manufacturing, 2022, 59, 103118
DOI: 10.1016/j.addma.2022.103118

Concurrent Modelling and Experimental Investigation of Material Properties and Geometries Produced by Projection Microstereolithography

Khaled G. Mostafa, Muhammad Arshad, Aman Ullah, David S. Nobes and Ahmed Jawad Qureshi

Polymers, 2020, 12, 506
DOI: 10.3390/polym12030506

3D printed polarizing grids for IR-THz synchrotron radiation

Meguya Ryu, Denver Linklater, William Hart, Armandas Balčytis, Edvinas Skliutas, Mangirdas Malinauskas, Dominique Appadoo, Yaw-Ren Eugene Tan, Elena P Ivanova, Junko Morikawa and Saulius Juodkazis

J. Opt., 2018, 20, 035101
DOI: 10.1088/2040-8986/aaa6fb

Requirements and Evaluation of Commercial Digital Light Processing 3D Printers for Upscaled Production of Microstructured Tissue Culture Devices

Zoltán András Guller, Freja Høier, Rujing Zhang, Sandra Wilson and Niels B. Larsen

Adv Eng Mater, 2025, 27
DOI: 10.1002/adem.202501211

3D printed microfluidic devices with immunoaffinity monoliths for extraction of preterm birth biomarkers

Ellen K. Parker, Anna V. Nielsen, Michael J. Beauchamp, Haifa M. Almughamsi, Jacob B. Nielsen, Mukul Sonker, Hua Gong, Gregory P. Nordin and Adam T. Woolley

Anal Bioanal Chem, 2019, 411, 5405
DOI: 10.1007/s00216-018-1440-9

Theoretical prediction and experimental validation of the digital light processing (DLP) working curve for photocurable materials

Yang Li, Qijiang Mao, Jun Yin, Yifang Wang, Jianzhong Fu and Yong Huang

Additive Manufacturing, 2021, 37, 101716
DOI: 10.1016/j.addma.2020.101716

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms

Niall P. Macdonald, Joan M. Cabot, Petr Smejkal, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Anal. Chem., 2017, 89, 3858
DOI: 10.1021/acs.analchem.7b00136

Model of UV-curing thickness for new thiol-ene resin for additive manufacturing of energetic materials

Tao Guo, Min Xia, Wei Yang, Qing Na, Jing Zhang, Weishan Yao, Fanzhi Yang and Yunjun Luo

Additive Manufacturing, 2022, 54, 102716
DOI: 10.1016/j.addma.2022.102716

Compatibility of Popular Three-Dimensional Printed Microfluidics Materials with In Vitro Enzymatic Reactions

Wan-Zhen Sophie Lin, William E. Evenson, W. Kristian Vu Bostic, Richard W. Roberts and Noah Malmstadt

ACS Appl. Bio Mater., 2022, 5, 818
DOI: 10.1021/acsabm.1c01180

Biocompatible High-Resolution 3D-Printed Microfluidic Devices: Integrated Cell Chemotaxis Demonstration

Mawla Boaks, Connor Roper, Matthew Viglione, Kent Hooper, Adam T. Woolley, Kenneth A. Christensen and Gregory P. Nordin

Micromachines, 2023, 14, 1589
DOI: 10.3390/mi14081589

Regulation and Directing Stem Cell Fate by Tissue Engineering Functional Microenvironments: Scaffold Physical and Chemical Cues

Fei Xing, Lang Li, Changchun Zhou, Cheng Long, Lina Wu, Haoyuan Lei, Qingquan Kong, Yujiang Fan, Zhou Xiang and Xingdong Zhang

Stem Cells International, 2019, 2019, 1
DOI: 10.1155/2019/2180925

Spatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics

Jose L. Sanchez Noriega, Nicholas A. Chartrand, Jonard Corpuz Valdoz, Collin G. Cribbs, Dallin A. Jacobs, Daniel Poulson, Matthew S. Viglione, Adam T. Woolley, Pam M. Van Ry, Kenneth A. Christensen and Gregory P. Nordin

Nat Commun, 2021, 12
DOI: 10.1038/s41467-021-25788-w

Trends in 3D Printed Microfluidic Devices for Biotechnology Research

Geonho Cho, Sun Min Kim and Tae-Joon Jeon

KSBB, 2023, 38, 90
DOI: 10.7841/ksbbj.2023.38.2.90

Leveraging the third dimension in microfluidic devices using 3D printing: no longer just scratching the surface

Lauro A. Pradela Filho, Thiago R. L. C. Paixão, Gregory P. Nordin and Adam T. Woolley

Anal Bioanal Chem, 2024, 416, 2031
DOI: 10.1007/s00216-023-04862-w

Results of an interlaboratory study on the working curve in vat photopolymerization

Thomas J. Kolibaba, Jason P. Killgore, Benjamin W. Caplins, Callie I. Higgins, Uwe Arp, C. Cameron Miller, Dianne L. Poster, Yuqin Zong, Scott Broce, Tong Wang, Vaidas Talačka, Jonathan Andersson, Amelia Davenport, Matthew A. Panzer, John R. Tumbleston, Jasmine M. Gonzalez, Jesse Huffstetler, Benjamin R. Lund, Kai Billerbeck, Anthony M. Clay, Marcus R. Fratarcangeli, H. Jerry Qi, Dominique H. Porcincula, Lindsey B. Bezek, Kenji Kikuta, Matthew N. Pearlson, David A. Walker, Corey J. Long, Erion Hasa, Alan Aguirre-Soto, Angel Celis-Guzman, Daniel E. Backman, Raghuveer Lalitha Sridhar, Kevin A. Cavicchi, RJ Viereckl, Elliott Tong, Christopher J. Hansen, Darshil M. Shah, Cecelia Kinane, Abdon Pena-Francesch, Carlo Antonini, Rajat Chaudhary, Gabriele Muraca, Yousra Bensouda, Yue Zhang and Xiayun Zhao

Additive Manufacturing, 2024, 84, 104082
DOI: 10.1016/j.addma.2024.104082

Recent advances in 3D-printing-based organ-on-a-chip

Xinkun Wu, Wenwan Shi, Xiaojiang Liu and Zhongze Gu

EngMedicine, 2024, 1, 100003
DOI: 10.1016/j.engmed.2024.100003

Stereolithography based 3D-printed microfluidic device with integrated electrochemical detection

Brenda M. de C. Costa, Sophie Griveau, Fethi Bedioui, Fanny d’ Orlye, José Alberto F. da Silva and Anne Varenne

Electrochimica Acta, 2022, 407, 139888
DOI: 10.1016/j.electacta.2022.139888

Development of 3D printed microchips with encapsulated channels as miniaturized separation devices for bioanalysis

Christopher T. Desire, R. Dario Arrua, Billy Michalatos, Jing Zhang, Xanthe L. Venn, Michael Breadmore, Zlatko Kopecki, Neil McMillan, Robert Fitridge, Emily F. Hilder and Allison J. Cowin

Analytica Chimica Acta, 2026, 1384, 344971
DOI: 10.1016/j.aca.2025.344971

Metalearning‐Driven Inverse Optimization for Precision Microstructure Fabrication in Digital Light Processing Three‐Dimensional Printing

Jae Won Choi, Suhyeong Lim, Jeongsu Lee and Cheol Woo Ha

Advanced Intelligent Systems, 2026
DOI: 10.1002/aisy.202500988

Current and emerging trends in polymeric 3D printed microfluidic devices

Gustavo Gonzalez, Ignazio Roppolo, Candido Fabrizio Pirri and Annalisa Chiappone

Additive Manufacturing, 2022, 55, 102867
DOI: 10.1016/j.addma.2022.102867

3D printing of hollow geometries using blocking liquid substitution stereolithography

Aftab A. Bhanvadia, Richard T. Farley, Youngwook Noh and Toshikazu Nishida

Sci Rep, 2023, 13
DOI: 10.1038/s41598-022-26684-z

Low-Viscosity Polydimethylsiloxane Resin for Facile 3D Printing of Elastomeric Microfluidics

Elyse Fleck, Charlise Keck, Karolina Ryszka, Emma DeNatale and Joseph Potkay

Micromachines, 2023, 14, 773
DOI: 10.3390/mi14040773

Low-cost, versatile, and highly reproducible microfabrication pipeline to generate 3D-printed customised cell culture devices with complex designs

Cathleen Hagemann, Matthew C. D. Bailey, Eugenia Carraro, Ksenia S. Stankevich, Valentina Maria Lionello, Noreen Khokhar, Pacharaporn Suklai, Carmen Moreno-Gonzalez, Kelly O’Toole, George Konstantinou, Christina L. Dix, Sudeep Joshi, Eleonora Giagnorio, Mads S. Bergholt, Christopher D. Spicer, Albane Imbert, Francesco Saverio Tedesco, Andrea Serio and Chaitan Khosla

PLoS Biol, 2024, 22, e3002503
DOI: 10.1371/journal.pbio.3002503

Weapons of Moths against Bats and Their Bionic Applications

Tianqi Jia, H.M. Zabed, A.K. Singh, M.A. Ibrahim and N. Chen

BIO Web Conf., 2024, 142, 02014
DOI: 10.1051/bioconf/202414202014

Capillary Coatings: Flow and Drying Dynamics in Open Microchannels

Robert K. Lade, Krystopher S. Jochem, Christopher W. Macosko and Lorraine F. Francis

Langmuir, 2018, 34, 7624
DOI: 10.1021/acs.langmuir.8b00811

Enhanced continuous liquid interface production with track-etched membrane

Wenxiong Lin, Huagang Liu, Haizhou Huang, Jianhong Huang, Kaiming Ruan, Zixiong Lin, Hongchun Wu, Zhi Zhang, Jinming Chen, Jinhui Li, Yan Ge, Jie Zhong, Lixin Wu and Jie Liu

RPJ, 2019, 25, 117
DOI: 10.1108/RPJ-12-2017-0251

In-situ transfer vat photopolymerization for transparent microfluidic device fabrication

Yang Xu, Fangjie Qi, Huachao Mao, Songwei Li, Yizhen Zhu, Jingwen Gong, Lu Wang, Noah Malmstadt and Yong Chen

Nat Commun, 2022, 13
DOI: 10.1038/s41467-022-28579-z

Organ‐on‐a‐Chip Fabrication Using Dynamic Photomask

Terry Ching, Shu‐Yung Chang, Takanobu Takenouchi, Yu Shrike Zhang, Yi‐Chin Toh and Michinao Hashimoto

Small Methods, 2026, 10
DOI: 10.1002/smtd.202400416

Rapid and high-accuracy forming of ceramic parts by DLP technology based on optimization of shear stress

Changhui Song, Yongqi Chen, Zibin Liu, Yinong Li, Yongqiang Yang and Jiakuo Yu

Journal of the European Ceramic Society, 2024, 44, 1748
DOI: 10.1016/j.jeurceramsoc.2023.10.015

From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication

Jingjing Xu, Michael Harasek and Margit Gföhler

Polymers, 2025, 17, 455
DOI: 10.3390/polym17040455

Multifaceted polymeric materials in three‐dimensional processing (3DP) technologies: Current progress and prospects

Olayinka Oderinde, Shunli Liu, Kewen Li, Mengmeng Kang, Hussain Imtiaz, Fang Yao and Guodong Fu

Polymers for Advanced Techs, 2018, 29, 1586
DOI: 10.1002/pat.4281

3D-printed microchip electrophoresis device containing spiral electrodes for integrated capacitively coupled contactless conductivity detection

Brenda M. C. Costa, Aline G. Coelho, Michael J. Beauchamp, Jacob B. Nielsen, Gregory P. Nordin, Adam T. Woolley and José A. F. da Silva

Anal Bioanal Chem, 2022, 414, 545
DOI: 10.1007/s00216-021-03494-2

Fabrication routes via projection stereolithography for 3D-printing of microfluidic geometries for nucleic acid amplification

Charalampos Tzivelekis, Pavlos Sgardelis, Kevin Waldron, Richard Whalley, Dehong Huo, Kenny Dalgarno and Andreas Offenhausser

PLoS ONE, 2020, 15, e0240237
DOI: 10.1371/journal.pone.0240237

Fast multi-resolution 3D printing of microfluidics: enabling 2 μm channels and ultra-compact mixers

Dallin S. Miner, Matthew S. Viglione, Kent Hooper, Adam T. Woolley and Gregory P. Nordin

Microsyst Nanoeng, 2026, 12
DOI: 10.1038/s41378-026-01194-4

Biocompatible, Flexible, and Oxygen-Permeable Silicone-Hydrogel Material for Stereolithographic Printing of Microfluidic Lab-On-A-Chip and Cell-Culture Devices

Sabine Zips, Lukas Hiendlmeier, Lennart Jakob Konstantin Weiß, Heike Url, Tetsuhiko F. Teshima, Richard Schmid, Markus Eblenkamp, Petra Mela and Bernhard Wolfrum

ACS Appl. Polym. Mater., 2021, 3, 243
DOI: 10.1021/acsapm.0c01071

High‐Precision Stereolithography of Biomicrofluidic Devices

Alexandra P. Kuo, Nirveek Bhattacharjee, Yuan‐Sheng Lee, Kurt Castro, Yong Tae Kim and Albert Folch

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800395

Breaking the Third Wall: Implementing 3D-Printing Techniques to Expand the Complexity and Abilities of Multi-Organ-on-a-Chip Devices

Yoel Goldstein, Sarah Spitz, Keren Turjeman, Florian Selinger, Yechezkel Barenholz, Peter Ertl, Ofra Benny and Danny Bavli

Micromachines, 2021, 12, 627
DOI: 10.3390/mi12060627

High-accuracy DLP 3D printing of closed microfluidic channels based on a mask option strategy

Zhengdong Yu, Xiangqin Li, Tongxing Zuo, Qianglong Wang, Huan Wang and Zhenyu Liu

Int J Adv Manuf Technol, 2023, 127, 4001
DOI: 10.1007/s00170-023-11769-4

UV Adhesive Hybrid Bonding for Sub-100-μm DLP-3D-Printed Microchannels

Seungmin Lee, Bhargav Krishna Pullagura, Youngbin Kim, Chan Lee, Abdi Mirgissa Kaba, Boseok Huh, Jintae Kim, Sang Kug Chung and Dohyun Kim

BioChip J, 2025, 19, 367
DOI: 10.1007/s13206-025-00206-1

Innovations in theoretical modeling for vat photopolymerization

Yue Wang, Yang Li, Hongzhao Zhou, Na Liu, Yancheng Wang, Kai Tao, Deqing Mei and Tao Yue

Materials & Design, 2026, 262, 115384
DOI: 10.1016/j.matdes.2025.115384

Characterization of 3D-printed lenses and diffraction gratings made by DLP additive manufacturing

Laura D. Vallejo-Melgarejo, Ronald G. Reifenberger, Brittany A. Newell, Carlos A. Narváez-Tovar and José M. Garcia-Bravo

RPJ, 2019, 25, 1684
DOI: 10.1108/RPJ-03-2019-0074

Desktop‐Stereolithography 3D‐Printing of a Poly(dimethylsiloxane)‐Based Material with Sylgard‐184 Properties

Nirveek Bhattacharjee, Cesar Parra‐Cabrera, Yong Tae Kim, Alexandra P. Kuo and Albert Folch

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201800001

Portable 3D-printed sensor to measure ionic strength and pH in buffered and non-buffered solutions

Pouya Mehrdel, Shadi Karimi, Josep Farré-LLadós and Jasmina Casals-Terré

Food Chemistry, 2021, 344, 128583
DOI: 10.1016/j.foodchem.2020.128583

3D Printed Microfluidics

Anna V. Nielsen, Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Annual Rev. Anal. Chem., 2020, 13, 45
DOI: 10.1146/annurev-anchem-091619-102649

Role of GO and Photoinitiator Concentration on Curing Behavior of PEG-Based Polymer for DLP 3D Printing

Men Thi Hong Nguyen, Jong Hoon Kim, Woo Tae Jang, Yun Jae Jung, Eun Jin Park, Tai Hwan Ha, Sang Jung Ahn and Young Heon Kim

ACS Omega, 2024
DOI: 10.1021/acsomega.3c05378

Photosensitive naturally derived resins toward optical 3-D printing

Edvinas Skliutas, Sigita Kasetaite, Linas Jonušauskas, Jolita Ostrauskaite and Mangirdas Malinauskas

Opt. Eng., 2018, 57, 1
DOI: 10.1117/1.OE.57.4.041412

Fine lattice structural titanium dioxide ceramic produced by DLP 3D printing

Jin Guo, Yong Zeng, Peiran Li and Jimin Chen

Ceramics International, 2019, 45, 23007
DOI: 10.1016/j.ceramint.2019.07.346

Printable Graphene Oxide Nanocomposites as Versatile Platforms for Immobilization of Functional Biomolecules

Alberto S. de León, María de la Mata, Francisco J. Delgado and Sergio I. Molina

Macro Materials & Eng, 2022, 307
DOI: 10.1002/mame.202100784

Combining Hydrophilic and Hydrophobic Materials in 3D Printing for Fabricating Microfluidic Devices with Spatial Wettability

Max J. Männel, Niclas Weigel, Nicolas Hauck, Thomas Heida and Julian Thiele

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202100094

Low-cost and open-source strategies for chemical separations

Joshua J. Davis, Samuel W. Foster and James P. Grinias

Journal of Chromatography A, 2021, 1638, 461820
DOI: 10.1016/j.chroma.2020.461820

Light-induced additive manufacturing in membrane technology

Abdollah Khosravanian, Michael T. Scalzo, Huacheng Zhang, Benny D. Freeman, Ryan A. Mulvenna, Matthew R. Hill and Timothy F. Scott

Polymer, 2024, 296, 126833
DOI: 10.1016/j.polymer.2024.126833

Advances in 3d Printed-Based (Bio)Sensors for Food Analysis

Danilo M. dos Santos, Rafael M. Cardoso, Fernanda L. Migliorini, Murilo H. M. Facure, Luiza A. Mercante, Luiz H. C. Mattoso and Daniel Correa

SSRN Journal, 2022
DOI: 10.2139/ssrn.4016300

Fabrication of Micro-Perforated Panel (MPP) sound absorbers using Digital Light Processing (DLP) 3D printing technology

J. Carbajo, S.-H. Nam and N.X. Fang

Applied Acoustics, 2024, 216, 109788
DOI: 10.1016/j.apacoust.2023.109788

3D-Printed Microfluidic One-Way Valves and Pumps

Hunter Hinnen, Matthew Viglione, Troy R. Munro, Adam T. Woolley and Gregory P. Nordin

Micromachines, 2023, 14, 1286
DOI: 10.3390/mi14071286

Elucidating the mechanism of overcuring in microchannels fabricated via vat photopolymerization (VPP) for precise microfluidic chip printing

Xinhui Wang, Jinghang Liu, Antony Seng Kai Kho, Weixin Hong, Michael D. Gilchrist and Nan Zhang

Additive Manufacturing, 2024, 92, 104350
DOI: 10.1016/j.addma.2024.104350

Toward revolutionizing PEMFC manufacturing for clean energy conversion: a review on the innovative contribution of 3D printing techniques

Randa E. Khalifa, Asmaa A. Shalaby and Zdenko Špitalský

Int J Adv Manuf Technol, 2024, 135, 4119
DOI: 10.1007/s00170-024-14764-5

Vat photopolymerization 3D printing for advanced drug delivery and medical device applications

Xiaoyan Xu, Atheer Awad, Pamela Robles-Martinez, Simon Gaisford, Alvaro Goyanes and Abdul W. Basit

Journal of Controlled Release, 2021, 329, 743
DOI: 10.1016/j.jconrel.2020.10.008

Area-Exposure Additive Manufacturing Techniques and Devices: A Mini-Review

Xinyan Liu, Yuanqiao Li, Jing Zhou Zhao and Maonan Wang

Additive Manufacturing Frontiers, 2024, 3, 200171
DOI: 10.1016/j.amf.2024.200171

Comparative Studies on Polyurethane Composites Filled with Polyaniline and Graphene for DLP-Type 3D Printing

Hyeonseo Joo and Sunghun Cho

Polymers, 2020, 12, 67
DOI: 10.3390/polym12010067

Exploring three-dimensional photoinhibition to enhance vat photopolymerization: A preliminary study

Yue Zhang, Heyang Zhang and Xiayun Zhao

Precision Engineering, 2024, 90, 176
DOI: 10.1016/j.precisioneng.2024.08.009

Additive manufacturing of high aspect-ratio structures with self-focusing photopolymerization

Mingyu Yang, Kavin Kowsari, Nia O. Myrie, Daniela Espinosa-Hoyos, Anna Jagielska, Seok Kim, Nicholas X. Fang and Krystyn J. Van Vliet

gxjzz, 2022, 3, 542
DOI: 10.37188/lam.2022.032

Using Stereolithographic Printing to Manufacture Monolithic Microfluidic Devices with an Extremely High Aspect Ratio

Pin-Chuan Chen, Po-Tsang Chen and Tuan Ngoc Anh Vo

Polymers, 2021, 13, 3750
DOI: 10.3390/polym13213750

3D Printing Functionally Graded Porous Materials for Simultaneous Fabrication of Dense and Porous Structures in Membrane‐Integrated Fluidic Devices

Hari Kalathil Balakrishnan, Ludovic F. Dumée, Andrea Merenda, Cyril Aubry, Dan Yuan, Egan H. Doeven and Rosanne M. Guijt

Small Structures, 2023, 4
DOI: 10.1002/sstr.202200314

3D-printed bioanalytical devices

Gregory W Bishop, Jennifer E Satterwhite-Warden, Karteek Kadimisetty and James F Rusling

Nanotechnology, 2016, 27, 284002
DOI: 10.1088/0957-4484/27/28/284002

Microtubule-dependent pushing forces contribute to long-distance aster movement and centration inXenopus laevisegg extracts

Taylor Sulerud, Abdullah Bashar Sami, Guihe Li, April Kloxin, John Oakey, Jesse Gatlin and Claire Walczak

MBoC, 2020, 31, 2791
DOI: 10.1091/mbc.E20-01-0088

The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review

S.A. Rasaki, C. Liu, C. Lao, H. Zhang and Z. Chen

Renewable and Sustainable Energy Reviews, 2021, 148, 111369
DOI: 10.1016/j.rser.2021.111369

Ultra-resolution scalable microprinting

Callum Vidler, Kenneth Crozier and David Collins

Microsyst Nanoeng, 2023, 9
DOI: 10.1038/s41378-023-00537-9

Trace multi-class organic explosives analysis in complex matrices enabled using LEGO®-inspired clickable 3D-printed solid phase extraction block arrays

Rachel C. Irlam, Cian Hughes, Mark C. Parkin, Matthew S. Beardah, Michael O'Donnell, Dermot Brabazon and Leon P. Barron

Journal of Chromatography A, 2020, 1629, 461506
DOI: 10.1016/j.chroma.2020.461506

Comparison of Experimental and Computational Heat Transfer Characterization of Water Jet Impingement Array with Interspersed Fluid Extraction

David Hobby, Tom Walker, Alex Rattner, Chris Jacobsen, David Sherrer and Todd Bandhauer

Heat Transfer Engineering, 2021, 42, 549
DOI: 10.1080/01457632.2019.1707404

Study of the biocompatibility of polymeric resins processed by 3D printing for applications in manufacturing of devices for short term 3D cultures

João Paulo de Jesus Vieira, Saulo Soares da Silva, Ilva de Fátima Souza, Marcelo Bráulio Pedras, Bethânia Alves de Avelar Freitas and Libardo Andrés González Torres

Microfluid Nanofluid, 2025, 29
DOI: 10.1007/s10404-025-02809-4

Lignin nanoparticle-enhanced biobased resins for digital light processing 3D printing: Towards high resolution and tunable mechanical properties

Jenevieve Yao, Mohammad Morsali, Adrian Moreno, Mika H. Sipponen and Minna Hakkarainen

European Polymer Journal, 2023, 194, 112146
DOI: 10.1016/j.eurpolymj.2023.112146

Scalable 3D printing of aperiodic cellular structures by rotational stacking of integral image formation

Seok Kim, Jordan J. Handler, Young Tae Cho, George Barbastathis and Nicholas X. Fang

Sci. Adv., 2021, 7
DOI: 10.1126/sciadv.abh1200

Advances of sacrificial strategies in additive manufacturing: towards precision 3D architectures and broad material adaptability

Wenwan Shi, Ming Gao, Xin Zhou, Xiaolu Sun, Haibo Ding, Yuning Zhou, Shuheng Li, Jing Sun, Xiaoxiang Gao, Xiaojiang Liu and Zhongze Gu

Int. J. Extrem. Manuf., 2026, 8, 032005
DOI: 10.1088/2631-7990/ae37ad

Automated microfluidic devices integrating solid-phase extraction, fluorescent labeling, and microchip electrophoresis for preterm birth biomarker analysis

Vishal Sahore, Mukul Sonker, Anna V. Nielsen, Radim Knob, Suresh Kumar and Adam T. Woolley

Anal Bioanal Chem, 2018, 410, 933
DOI: 10.1007/s00216-017-0548-7

A Solution to the Clearance Problem of Sacrificial Material in 3D Printing of Microfluidic Devices

Terak Hornik, James Kempa, Jeffrey Catterlin and Emil Kartalov

Micromachines, 2022, 14, 16
DOI: 10.3390/mi14010016

Advances in Optical Sensing and Bioanalysis Enabled by 3D Printing

Alexander Lambert, Santino Valiulis and Quan Cheng

ACS Sens., 2018, 3, 2475
DOI: 10.1021/acssensors.8b01085

Three-body wear of 3D printed temporary materials

Andreas Kessler, Marcel Reymus, Reinhard Hickel and Karl-Heinz Kunzelmann

Dental Materials, 2019, 35, 1805
DOI: 10.1016/j.dental.2019.10.005

Additively manufactured vaporizing liquid microthruster with micro pin fins for enhanced heat transfer

Xinyi Wang, Zheni Fei, Voon Loong Wong, Yong Ren and Kean How Cheah

Acta Astronautica, 2022, 199, 58
DOI: 10.1016/j.actaastro.2022.07.001

Gecko-inspired soft actuators for wafer handling via overcuring-induced anisotropic microstructures in DLP 3D printing

Sooheon Kim, Jongwon Kim, Sangbo Seo and Hongyun So

Microsyst Nanoeng, 2025, 11
DOI: 10.1038/s41378-025-00920-8

Component library creation and pixel array generation with micromilled droplet microfluidics

David McIntyre, Diana Arguijo, Kaede Kawata and Douglas Densmore

Microsyst Nanoeng, 2025, 11
DOI: 10.1038/s41378-024-00839-6

Triplet‐Triplet Annihilation Enhances Photochemical Curing Contrast for Vat‐Based 3D Printing

Connor J. O'Dea, Evan P. Scruggs and Zachariah A. Page

Adv Funct Materials, 2026
DOI: 10.1002/adfm.202530758

Programmable optical window bonding enabled 3D printing of high‐resolution transparent microfluidic devices for biomedical applications

Mengguang Ye, Yuxiang Xue, Hongyu Zhao, Patricia Hazelton, Yuxuan Ji, Glen McHale and Xianfeng Chen

Droplet, 2025, 4
DOI: 10.1002/dro2.153

Surface Modification of 3D Printed Microfluidic Devices for Controlled Wetting in Two-Phase Flow

Chandler A. Warr, Nicole G. Crawford, Gregory P. Nordin and William G. Pitt

Micromachines, 2022, 14, 6
DOI: 10.3390/mi14010006

Optimization of the UV-Curing and Magnetic Capabilities of a Magnetite 3-D Printable Resin for Metamaterial Applications

Alicia Gardiner, Roger Domingo-Roca, Musanna Abdul Maleque, Mahshid Hafezi, James F. C. Windmill and Andrew Feeney

IEEE Flex. Electron., 2025, 4, 52
DOI: 10.1109/JFLEX.2025.3539259

Ceramic green and fired body with a uniform microstructure prepared using living characteristics of photo-curable cycloaliphatic epoxide: Applicability of cycloaliphatic epoxide in photo-polymerization-based 3D printing

Hye-Yeong Park, Jeong-gu Yeo, Jiyeon Choi, Gyu-Bin Choe, Gyu-Nam Kim, Young-Hag Koh, SeungCheol Yang and Yeon-Gil Jung

Journal of the European Ceramic Society, 2022, 42, 589
DOI: 10.1016/j.jeurceramsoc.2021.10.015

Piezoelectric microphone via a digital light processing 3D printing process

Benjamin Tiller, Andrew Reid, Botong Zhu, José Guerreiro, Roger Domingo-Roca, Joseph Curt Jackson and J.F.C. Windmill

Materials & Design, 2019, 165, 107593
DOI: 10.1016/j.matdes.2019.107593

3D printed microfluidics for cell biological applications

Liang Zhao and Xiayan Wang

TrAC Trends in Analytical Chemistry, 2023, 158, 116864
DOI: 10.1016/j.trac.2022.116864

High‐Resolution Stereolithography of Amorphous, Dense and Mechanically Stable Bioactive Glass

Leonhard Hambitzer, Zahra Hosneolfat, Kristin Griebenow, Richard Prediger, Sebastian Kluck, Ines Ketterer, Shaher Bano Zaidi, Delia S. Brauer and Frederik Kotz‐Helmer

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500925

Recent developments in digital light processing 3D-printing techniques for microfluidic analytical devices

Ali Amini, Rosanne M. Guijt, Thomas Themelis, Jelle De Vos and Sebastiaan Eeltink

Journal of Chromatography A, 2023, 1692, 463842
DOI: 10.1016/j.chroma.2023.463842

Toward a Bio-Inspired Acoustic Sensor: Achroia grisella’s Ear

Lara Diaz-Garcia, Andrew Reid, Joseph C. Jackson-Camargo and James F. C. Windmill

IEEE Sensors J., 2022, 22, 17746
DOI: 10.1109/JSEN.2022.3197841

Sequential process optimization for a digital light processing system to minimize trial and error

Jae Won Choi, Gyeong-Ji Kim, Sukjoon Hong, Jeung Hee An, Baek-Jin Kim and Cheol Woo Ha

Sci Rep, 2022, 12
DOI: 10.1038/s41598-022-17841-5

Functional Materials for DLP-SLA 3D Printing Using Thiol–Acrylate Chemistry: Resin Design and Postprint Applications

Lubna Shahzadi, Fernando Maya, Michael C. Breadmore and Stuart C. Thickett

ACS Appl. Polym. Mater., 2022, 4, 3896
DOI: 10.1021/acsapm.2c00358

Bioprinting using PEGDMA-based hydrogel on DLP printer

Shu-Yung Chang, Terry Ching and Michinao Hashimoto

Materials Today: Proceedings, 2022, 70, 179
DOI: 10.1016/j.matpr.2022.09.017

Scanning‐Laser‐Based Microstereolithography of Microfluidic Chips with Micron Resolution

Christof Rein, Keynaz Kamranikia, Raymonde Council, Pegah Pezeshkpour, Frederik Kotz‐Helmer and Bastian E. Rapp

Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202400047

3D printing technology meets marine biofouling: A study on antifouling resin for protecting marine sensors

Zhuo Deng, Yi Wang, Dun Zhang and Chao Chen

Additive Manufacturing, 2023, 73, 103697
DOI: 10.1016/j.addma.2023.103697

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components

Isteaque Ahmed, Katherine Sullivan and Aashish Priye

Biosensors, 2022, 12, 652
DOI: 10.3390/bios12080652

Roll-to-roll, high-resolution 3D printing of shape-specific particles

Jason M. Kronenfeld, Lukas Rother, Max A. Saccone, Maria T. Dulay and Joseph M. DeSimone

Nature, 2024, 627, 306
DOI: 10.1038/s41586-024-07061-4

Photopolymerization in 3D Printing

Ali Bagheri and Jianyong Jin

ACS Appl. Polym. Mater., 2019, 1, 593
DOI: 10.1021/acsapm.8b00165

Emerging Application of Nanorobotics and Artificial Intelligence To Cross the BBB: Advances in Design, Controlled Maneuvering, and Targeting of the Barriers

Ajay Vikram Singh, Vaisali Chandrasekar, Poonam Janapareddy, Divya Elsa Mathews, Peter Laux, Andreas Luch, Yin Yang, Beatriz Garcia-Canibano, Shidin Balakrishnan, Julien Abinahed, Abdulla Al Ansari and Sarada Prasad Dakua

ACS Chem. Neurosci., 2021, 12, 1835
DOI: 10.1021/acschemneuro.1c00087

A practical framework for predicting conversion profiles in vat photopolymerizations

Jianwei Tu, Yaser Kashcooli, Nicolas J. Alvarez and Giuseppe R. Palmese

Additive Manufacturing, 2022, 59, 103102
DOI: 10.1016/j.addma.2022.103102

Nonlinear light attenuation curing effects in vat photopolymerization

Yuseok Kim and Sadaf Sobhani

Additive Manufacturing, 2025, 109, 104857
DOI: 10.1016/j.addma.2025.104857

Fabrication of integrated microfluidic devices by direct ink writing (DIW) 3D printing

Terry Ching, Yingying Li, Rahul Karyappa, Akihiro Ohno, Yi-Chin Toh and Michinao Hashimoto

Sensors and Actuators B: Chemical, 2019, 297, 126609
DOI: 10.1016/j.snb.2019.05.086

Applied tutorial for the design and fabrication of biomicrofluidic devices by resin 3D printing

Hannah.B. Musgrove, Megan.A. Catterton and Rebecca.R. Pompano

Analytica Chimica Acta, 2022, 1209, 339842
DOI: 10.1016/j.aca.2022.339842

Microfluidic multipoles theory and applications

Pierre-Alexandre Goyette, Étienne Boulais, Frédéric Normandeau, Gabriel Laberge, David Juncker and Thomas Gervais

Nat Commun, 2019, 10
DOI: 10.1038/s41467-019-09740-7

Miniature Pneumatic Actuators for Soft Robots by High‐Resolution Multimaterial 3D Printing

Yuan‐Fang Zhang, Colin Ju‐Xiang Ng, Zhe Chen, Wang Zhang, Sahil Panjwani, Kavin Kowsari, Hui Ying Yang and Qi Ge

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201900427

Ultrafast and Mold‐Free Fabrication of Tactile Sensors via Pixel‐Level Sequential Grayscale Digital Light Processing Printing

Muhammad Faizul Zaki, Adhimoorthy Saravanan, Bohr‐Ran Huang, Wan‐Ru Huang, Wei‐Hsiu Liu and Pin‐Chuan Chen

Adv Funct Materials, 2026, 36
DOI: 10.1002/adfm.202515914

Sequential shapeshifting 4D printing: programming the pathway of multi-shape transformation by 3D printing stimuli-responsive polymers

Bangan Peng, Yunchong Yang and Kevin A Cavicchi

Multifunct. Mater., 2020, 3, 042002
DOI: 10.1088/2399-7532/abcbe1

Tailored and Highly Stretchable Sensor Prepared by Crosslinking an Enhanced 3D Printed UV‐Curable Sacrificial Mold

Shuqiang Peng, Zian Wang, Jinbin Lin, Jia‐Tao Miao, Longhui Zheng, Zhi Yang, Zixiang Weng and Lixin Wu

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202008729

Photopolymer formulation to minimize feature size, surface roughness, and stair-stepping in digital light processing-based three-dimensional printing

Kavin Kowsari, Biao Zhang, Sahil Panjwani, Zaichun Chen, Hardik Hingorani, Saeed Akbari, Nicholas X. Fang and Qi Ge

Additive Manufacturing, 2018, 24, 627
DOI: 10.1016/j.addma.2018.10.037

Advancing 3D-Printed Microfluidics: Characterization of a Gas-Permeable, High-Resolution PDMS Resin for Stereolithography

Elyse Fleck, Alec Sunshine, Emma DeNatale, Charlise Keck, Alexandra McCann and Joseph Potkay

Micromachines, 2021, 12, 1266
DOI: 10.3390/mi12101266

Fabrication of Microfluidic Devices for Emulsion Formation by Microstereolithography

Max J. Männel, Elif Baysak and Julian Thiele

Molecules, 2021, 26, 2817
DOI: 10.3390/molecules26092817

Thermo-mechanical and swelling properties of three-dimensional-printed poly (ethylene glycol) diacrylate/silica nanocomposites

John Ryan C. Dizon, Qiyi Chen, Arnaldo D. Valino and Rigoberto C. Advincula

MRS Communications, 2019, 9, 209
DOI: 10.1557/mrc.2018.188

3D Printed PCB Microfluidics

Stefan Gassmann, Sathurja Jegatheeswaran, Till Schleifer, Hesam Arbabi and Helmut Schütte

Micromachines, 2022, 13, 470
DOI: 10.3390/mi13030470

Mode hybridisation strategies for subwavelength sound attenuation in miniaturised Helmholtz resonators

R. Domingo-Roca, A. Feeney, J. C. Jackson-Camargo and J. F. C. Windmill

Sci Rep, 2026
DOI: 10.1038/s41598-026-46693-6

Recent advances in microfluidic sample preparation and separation techniques for molecular biomarker analysis: A critical review

Mukul Sonker, Vishal Sahore and Adam T. Woolley

Analytica Chimica Acta, 2017, 986, 1
DOI: 10.1016/j.aca.2017.07.043

Additive Manufacturing of Epoxy Resins: Materials, Methods, and Latest Trends

Mazhar Peerzada, Sadaf Abbasi, Kin Tak Lau and Nishar Hameed

Ind. Eng. Chem. Res., 2020, 59, 6375
DOI: 10.1021/acs.iecr.9b06870

Digital Light Processing 3D Printing of Triple Shape Memory Polymer for Sequential Shape Shifting

Bangan Peng, Yunchong Yang, Kai Gu, Eric J. Amis and Kevin A. Cavicchi

ACS Materials Lett., 2019, 1, 410
DOI: 10.1021/acsmaterialslett.9b00262

Optimizing Process Parameters in Commercial Micro‐Stereolithography for Forming Emulsions and Polymer Microparticles in Nonplanar Microfluidic Devices

Max J. Männel, Lukas Selzer, Ricardo Bernhardt and Julian Thiele

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800408

Distributed Manufacturing of Open Source Medical Hardware for Pandemics

Joshua M. Pearce

JMMP, 2020, 4, 49
DOI: 10.3390/jmmp4020049

Additive Manufacturing (AM) Capacitive Acoustic and Ultrasonic Transducers Using a Commercial Direct Light Processing (DLP) Printer

Botong Zhu, Jose Manuel Francisco Guerreiro, Yansheng Zhang, Benjamin P. Tiller and James F. C. Windmill

IEEE Sensors J., 2020, 20, 1770
DOI: 10.1109/JSEN.2019.2950089

Hierarchically Designed Electron Paths in 3D Printed Energy Storage Devices

Seong Hyeon Park, Manpreet Kaur, Dongwon Yun and Woo Soo Kim

Langmuir, 2018, 34, 10897
DOI: 10.1021/acs.langmuir.8b02404

Digital Manufacturing for Microfluidics

Arman Naderi, Nirveek Bhattacharjee and Albert Folch

Annu. Rev. Biomed. Eng., 2019, 21, 325
DOI: 10.1146/annurev-bioeng-092618-020341

Materials Testing for the Development of Biocompatible Devices through Vat-Polymerization 3D Printing

Gustavo González, Désirée Baruffaldi, Cinzia Martinengo, Angelo Angelini, Annalisa Chiappone, Ignazio Roppolo, Candido Fabrizio Pirri and Francesca Frascella

Nanomaterials, 2020, 10, 1788
DOI: 10.3390/nano10091788

Exceptional Mechanical Properties and Heat Resistance of Photocurable Bismaleimide Ink for 3D Printing

Wenqiang Hua, Qilang Lin, Bo Qu, Yanyu Zheng, Xiaoying Liu, Wenjie Li, Xiaojing Zhao, Shaoyun Chen and Dongxian Zhuo

Materials, 2021, 14, 1708
DOI: 10.3390/ma14071708

Advances in precision microfabrication through digital light processing: system development, material and applications

Xinhui Wang, Jinghang Liu, Yang Zhang, Per Magnus Kristiansen, Aminul Islam, Michael Gilchrist and Nan Zhang

Virtual and Physical Prototyping, 2023, 18
DOI: 10.1080/17452759.2023.2248101

3D printing on glass for direct sensor integration

M Neubauer, M McGlennen, S Thomas and S Warnat

Eng. Res. Express, 2019, 1, 025051
DOI: 10.1088/2631-8695/ab5e9f

Repairable 3D printable photopolymer resins based on low-activation-energy adaptable covalent bonding

Chongnan Ye, Kylian Janssen, Geraldine H.M. Schnelting, Vincent S.D. Voet, Rudy Folkersma and Katja Loos

Polymer, 2025, 319, 127997
DOI: 10.1016/j.polymer.2024.127997

Biobased Acrylate Photocurable Resin Formulation for Stereolithography 3D Printing

Vincent S. D. Voet, Tobias Strating, Geraldine H. M. Schnelting, Peter Dijkstra, Martin Tietema, Jin Xu, Albert J. J. Woortman, Katja Loos, Jan Jager and Rudy Folkersma

ACS Omega, 2018, 3, 1403
DOI: 10.1021/acsomega.7b01648

3D Printed Microfluidic Devices for Microchip Electrophoresis of Preterm Birth Biomarkers

Michael J. Beauchamp, Anna V. Nielsen, Hua Gong, Gregory P. Nordin and Adam T. Woolley

Anal. Chem., 2019, 91, 7418
DOI: 10.1021/acs.analchem.9b01395

Bioactive Glass Microscaffolds Fabricated by Two‐Photon Lithography

Leonhard Hambitzer, Jan Mathis Hornbostel, Louise Roolfs, Richard Prediger, Sebastian Kluck, Kai Zheng, Cornelia Lee‐Thedieck and Frederik Kotz‐Helmer

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202504475

Bioprinting of Organ-on-Chip Systems: A Literature Review from a Manufacturing Perspective

Ketan Thakare, Laura Jerpseth, Zhijian Pei, Alaa Elwany, Francis Quek and Hongmin Qin

JMMP, 2021, 5, 91
DOI: 10.3390/jmmp5030091

3D printing of cordierite glass-ceramics

Weilong Ren, Wei Liu, Xin Luo, Zhiyuan Liu, Changyong Liu and Zhangwei Chen

Ceramics International, 2025, 51, 1632
DOI: 10.1016/j.ceramint.2024.11.139

Accelerating Fuel Cell Development with Additive Manufacturing Technologies: State of the Art, Opportunities and Challenges

X. Y. Tai, A. Zhakeyev, H. Wang, K. Jiao, H. Zhang and J. Xuan

Fuel Cells, 2019, 19, 636
DOI: 10.1002/fuce.201900164

Self-Healing, Antibacterial, and 3D-Printable Polymerizable Deep Eutectic Solvents Derived from Tannic Acid

Guoqiang Zhu, Jinshuai Zhang, Jia Huang, Xixi Yu, Jianwen Cheng, Qianqian Shang, Yun Hu, Chengguo Liu, Meng Zhang, Lihong Hu and Yonghong Zhou

ACS Sustainable Chem. Eng., 2022, 10, 7954
DOI: 10.1021/acssuschemeng.2c01328

Advances in additive manufacturing of fuel cells: A review of technologies, materials, and challenges

Rohit Singh, Rana Pratap, Jinoop Arackal Narayanan, Geethapriyan Thangamani, Venkatesan Venkata Krishnan, Arun Arjunan and David Hughes

Sustainable Materials and Technologies, 2025, 43, e01317
DOI: 10.1016/j.susmat.2025.e01317

Adhesive bonding strategies to fabricate high-strength and transparent 3D printed microfluidic device

Seren Kecili and H. Cumhur Tekin

Biomicrofluidics, 2020, 14
DOI: 10.1063/5.0003302

Influence of Diol Structure on the Mechanical and Thermal Properties of Bio-Based UV-Curable Unsaturated Polyesters for 3D Printing

Chih-Yu Jao, Hsu-I Mao, Jia-Wei Shiu, Yu-Chen Chen, Ruei-Jing Chu and Chin-Wen Chen

ACS Appl. Polym. Mater., 2025, 7, 11284
DOI: 10.1021/acsapm.5c01805

3D Printing of Noncytotoxic High-Resolution Microchannels in Bisphenol-A Ethoxylate Dimethacrylate Tissue-Mimicking Materials

Roger Domingo-Roca, Lauren Gilmour, Oana Dobre, Stylianos Sarrigiannidis, Mairi E. Sandison, Richard O'Leary, Joseph C. Jackson-Camargo and Helen E. Mulvana

3D Printing and Additive Manufacturing, 2023, 10, 1101
DOI: 10.1089/3dp.2021.0235

An Investigation of Integrated Multiscale Three-Dimensional Printing for Hierarchical Structures Fabrication

Xiangjia Li, Tommaso Baldacchini and Yong Chen

Journal of Micro- and Nano-Manufacturing, 2021, 9
DOI: 10.1115/1.4054317

Vat photopolymerization based Photoinhibition aided Ceramic additive manufacturing (PinCAM)

Yousra Bensouda, Yue Zhang and Xiayun Zhao

Journal of the European Ceramic Society, 2024, 44, 7801
DOI: 10.1016/j.jeurceramsoc.2024.05.080

High performance polyimides for additive manufacturing: A critical review

Premkumar Kothavade, Abdullah Kafi, Kadhiravan Shanmuganathan and Stuart Bateman

Progress in Polymer Science, 2026, 172, 102055
DOI: 10.1016/j.progpolymsci.2025.102055

UV assisted photo reactive polyether‐polyesteramide resin for future applications in 3D printing

Steffi I. Macías, Guillem Ruano, Núria Borràs, Carlos Alemán and Elaine Armelin

Journal of Polymer Science, 2022, 60, 688
DOI: 10.1002/pol.20210626

Open-source interactive design platform for 3D-printed microfluidic devices

Yushen Zhang, Mengchu Li, Tsun-Ming Tseng and Ulf Schlichtmann

Commun Eng, 2024, 3
DOI: 10.1038/s44172-024-00217-0

High-fidelity and high-efficiency additive manufacturing using tunable pre-curing digital light processing

Yang Li, Qijiang Mao, Xiaokeng Li, Jun Yin, Yifang Wang, Jianzhong Fu and Yong Huang

Additive Manufacturing, 2019, 30, 100889
DOI: 10.1016/j.addma.2019.100889

3D Printing in Dentistry—State of the Art

A Kessler, R Hickel and M Reymus

Operative Dentistry, 2020, 45, 30
DOI: 10.2341/18-229-L

Photo Inhibition Aided Vat Photopolymerization Additive Manufacturing (Pinpam): A Potential Pathway to Tackle Over-Curing for Printing Three-Dimensional High-Fidelity Parts

YUE ZHANG, Chaitanya Krishna Prasad Vallabh, Heyang Zhang and Xiayun Zhao

SSRN Journal, 2022
DOI: 10.2139/ssrn.4090359

Mechanistic Modelling of Coupled UV Energy Penetration and Resin Flow Dynamics in Digital Light Processing (DLP)-Based Microfluidic Chip Printing

Xinhui Wang, Antony Seng Kai Kho, Jinghang Liu, Tianyu Mao, Michael D. Gilchrist and Nan Zhang

Micromachines, 2025, 16, 115
DOI: 10.3390/mi16020115

3D printing for the integration of porous materials into miniaturised fluidic devices: A review

Hari Kalathil Balakrishnan, Egan H. Doeven, Andrea Merenda, Ludovic F. Dumée and Rosanne M. Guijt

Analytica Chimica Acta, 2021, 1185, 338796
DOI: 10.1016/j.aca.2021.338796

Microfluidic Chips for Life Sciences—A Comparison of Low Entry Manufacturing Technologies

Maximilian Grösche, Ahmed E. Zoheir, Johannes Stegmaier, Ralf Mikut, Dario Mager, Jan G. Korvink, Kersten S. Rabe and Christof M. Niemeyer

Small, 2019, 15
DOI: 10.1002/smll.201901956

Automated photonic tuning of silicon microring resonators using a 3D-printed microfluidic mixer

Christian Carver, Mawla Boaks, JuHang Kim, Kevin Larson, Gregory P. Nordin and Ryan M. Camacho

OSA Continuum, 2021, 4, 2075
DOI: 10.1364/OSAC.425058

A Bio-Based Resin for a Multi-Scale Optical 3D Printing

Edvinas Skliutas, Migle Lebedevaite, Sigita Kasetaite, Sima Rekštytė, Saulius Lileikis, Jolita Ostrauskaite and Mangirdas Malinauskas

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-66618-1

Triplet fusion upconversion nanocapsules for volumetric 3D printing

Samuel N. Sanders, Tracy H. Schloemer, Mahesh K. Gangishetty, Daniel Anderson, Michael Seitz, Arynn O. Gallegos, R. Christopher Stokes and Daniel N. Congreve

Nature, 2022, 604, 474
DOI: 10.1038/s41586-022-04485-8

Enhancing the Sound Absorption of Small-Scale 3-D Printed Acoustic Metamaterials Based on Helmholtz Resonators

Cecilia Casarini, Benjamin Tiller, Carmelo Mineo, Charles N. Macleod, James F. C. Windmill and Joseph C. Jackson

IEEE Sensors J., 2018, 18, 7949
DOI: 10.1109/JSEN.2018.2865129

A compact LED-based projection microstereolithography for producing 3D microstructures

Ebrahim Behroodi, Hamid Latifi and Farhood Najafi

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-56044-3

Advances in 3D printed sensors for food analysis

Danilo M. dos Santos, Rafael M. Cardoso, Fernanda L. Migliorini, Murilo H.M. Facure, Luiza A. Mercante, Luiz H.C. Mattoso and Daniel S. Correa

TrAC Trends in Analytical Chemistry, 2022, 154, 116672
DOI: 10.1016/j.trac.2022.116672

Mechanically tunable, shape memory, recyclable and reprintable 3D printed polyurethane materials based on hindered urea bonds

Sufen Shen, Wenqin Shao, Zongsheng Liu, Bangdong Ge, Meng Ma, Si Chen, Yanqin Shi, Huiwen He, Yulu Zhu and Xu Wang

European Polymer Journal, 2025, 236, 114108
DOI: 10.1016/j.eurpolymj.2025.114108

Fabrication of precision silica glass artificial compound eyes using photocurable liquid glass composites and mold pre-compensation

Guilin Wang, Dejian Kong, Youwang Hu, Yandong Wang, Yuan Li, Pingmei Ming and Xiaoyan Sun

Journal of Non-Crystalline Solids, 2026, 680, 124025
DOI: 10.1016/j.jnoncrysol.2026.124025

Microfluidic chip fabrication and performance analysis of 3D printed material for use in microfluidic nucleic acid amplification applications

Charalampos Tzivelekis, Matthew P Selby, Albert Batet, Hojjat Madadi and Kenny Dalgarno

J. Micromech. Microeng., 2021, 31, 035005
DOI: 10.1088/1361-6439/abd9a9

Vibration-assisted vat photopolymerization for pixelated-aliasing-free surface fabrication

Han Xu, Renzhi Hu, Shuai Chen, Junhong Zhu, Chi Zhou and Yong Chen

Int. J. Extrem. Manuf., 2024, 6, 035004
DOI: 10.1088/2631-7990/ad2e14

Thiol‐yne 3D Printable Polymeric Resins for the Efficient Removal of a Model Pollutant from Waters

Lubna Shahzadi, Fernando Maya, Michael C. Breadmore and Stuart C. Thickett

Macro Materials & Eng, 2023, 308
DOI: 10.1002/mame.202200497

Investigation of Light-Induced Surface Roughness in Projection Micro-Stereolithography Additive Manufacturing (PµSLA)

Khaled G. Mostafa, David S. Nobes and Ahmed Jawad Qureshi

Procedia CIRP, 2020, 92, 187
DOI: 10.1016/j.procir.2020.05.177

Fabrication of Embedded Microfluidic Chips with Single Micron Resolution Using Two‐Photon Lithography

Manuel Luitz, Büşra M. Kırpat Konak, Ahmad Sherbaz, Richard Prediger, Niloofar Nekoonam, Barbara Di Ventura, Frederik Kotz‐Helmer and Bastian E. Rapp

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300667

Light-Based 3D Printing of Polymeric Materials

Ana Paula Kitos Vasconcelos, S. Cem Millik, Antonio Vazquez, Naroa Sadaba, Sahana Sateesh, Shannon Daily, Siwei Yu, Meijing Zhang, Natwara Manitsirisuk and Alshakim Nelson

Annual Review of Materials Research, 2025, 55, 491
DOI: 10.1146/annurev-matsci-080423-123810

Recent Advances in Tactile Sensory Systems: Mechanisms, Fabrication, and Applications

Jianguo Xi, Huaiwen Yang, Xinyu Li, Ruilai Wei, Taiping Zhang, Lin Dong, Zhenjun Yang, Zuqing Yuan, Junlu Sun and Qilin Hua

Nanomaterials, 2024, 14, 465
DOI: 10.3390/nano14050465

“Pipe Organ” Inspired Air-Coupled Ultrasonic Transducers With Broader Bandwidth

Botong Zhu, Benjamin P. Tiller, Alan J. Walker, A. J. Mulholland and James F. C. Windmill

IEEE Trans. Ultrason., Ferroelect., Freq. Contr., 2018, 65, 1873
DOI: 10.1109/TUFFC.2018.2861575

Relation of the working curve and exposure intensity in VPP 3D-printing

Kai Billerbeck, Corinna Hägele and Jens Träger

Prog Addit Manuf, 2024, 9, 1015
DOI: 10.1007/s40964-023-00498-5

Artificial intelligence and machine learning driven nanorobotics for targeted brain delivery: Redefining blood-brain barrier navigation

Suraj Kumar, Rishabha Malviya, Sathvik Belagodu Sridhar, Tarun Wadhwa and Javedh Shareef

Journal of Neuroscience Methods, 2026, 429, 110695
DOI: 10.1016/j.jneumeth.2026.110695

Fabrication of Sophisticated Microstructures using Weak Support in 3D Printing

Zhongwei Yu, Xinghong Deng, Guangbin Shao and Longqiu Li

Macro Materials & Eng, 2022, 307
DOI: 10.1002/mame.202100613

Rational Design and Characterization of Materials for Optimized Additive Manufacturing by Digital Light Processing

Rajat Chaudhary, Raziyeh Akbari and Carlo Antonini

Polymers, 2023, 15, 287
DOI: 10.3390/polym15020287

3D Printing: An Alternative Microfabrication Approach with Unprecedented Opportunities in Design

Hari Kalathil Balakrishnan, Faizan Badar, Egan H. Doeven, James I. Novak, Andrea Merenda, Ludovic F. Dumée, Jennifer Loy and Rosanne M. Guijt

Anal. Chem., 2021, 93, 350
DOI: 10.1021/acs.analchem.0c04672

3D microfluidics in PDMS: manufacturing with 3D molding

Tyler Richmond and Nathan Tompkins

Microfluid Nanofluid, 2021, 25
DOI: 10.1007/s10404-021-02478-z

Recent Advances in Analytical Chemistry by 3D Printing

Bethany Gross, Sarah Y. Lockwood and Dana M. Spence

Anal. Chem., 2017, 89, 57
DOI: 10.1021/acs.analchem.6b04344

Extrusion 3D Printing of Intrinsically Fluorescent Thermoplastic Polyimide: Revealing an Undisclosed Potential

Premkumar Kothavade, Abdullah Kafi, Chaitali Dekiwadia, Viksit Kumar, Santhosh Babu Sukumaran, Kadhiravan Shanmuganathan and Stuart Bateman

Polymers, 2024, 16, 2798
DOI: 10.3390/polym16192798

Integrated Printed Microfluidic Biosensors

Jacky F.C. Loo, Aaron H.P. Ho, Anthony P.F. Turner and Wing Cheung Mak

Trends in Biotechnology, 2019, 37, 1104
DOI: 10.1016/j.tibtech.2019.03.009

Fabrication of Complex 3D Fluidic Networks via Modularized Stereolithography

Terry Ching, Yi-Chin Toh and Michinao Hashimoto

Adv Eng Mater, 2020, 22
DOI: 10.1002/adem.201901109

3D Printed Microfluidic Features Using Dose Control in X, Y, and Z Dimensions

Michael Beauchamp, Hua Gong, Adam Woolley and Gregory Nordin

Micromachines, 2018, 9, 326
DOI: 10.3390/mi9070326

Use of Machine Learning with Temporal Photoluminescence Signals from CdTe Quantum Dots for Temperature Measurement in Microfluidic Devices

Charles Lewis, James W. Erikson, Derek A. Sanchez, C. Emma McClure, Gregory P. Nordin, Troy R. Munro and John S. Colton

ACS Appl. Nano Mater., 2020, 3, 4045
DOI: 10.1021/acsanm.0c00065

Moving from millifluidic to truly microfluidic sub-100-μm cross-section 3D printed devices

Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Anal Bioanal Chem, 2017, 409, 4311
DOI: 10.1007/s00216-017-0398-3

Sealing 3D-printed parts to poly(dimethylsiloxane) for simple fabrication of Microfluidic devices

Cody S. Carrell, Cynthia P. McCord, Rachel M. Wydallis and Charles S. Henry

Analytica Chimica Acta, 2020, 1124, 78
DOI: 10.1016/j.aca.2020.05.014

Flexible Materials for High-Resolution 3D Printing of Microfluidic Devices with Integrated Droplet Size Regulation

Niclas Weigel, Max J. Männel and Julian Thiele

ACS Appl. Mater. Interfaces, 2021, 13, 31086
DOI: 10.1021/acsami.1c05547

Direct Conversion of McDonald’s Waste Cooking Oil into a Biodegradable High-Resolution 3D-Printing Resin

Bing Wu, Atiqurrehman Sufi, Rajshree Ghosh Biswas, Arika Hisatsune, Vincent Moxley-Paquette, Paris Ning, Ronald Soong, Andrew P. Dicks and André J. Simpson

ACS Sustainable Chem. Eng., 2020, 8, 1171
DOI: 10.1021/acssuschemeng.9b06281

Advances in digital light processing of hydrogels

Xingwu Mo, Liliang Ouyang, Zhuo Xiong and Ting Zhang

Biomed. Mater., 2022, 17, 042002
DOI: 10.1088/1748-605X/ac6b04

Digital light processing 3D printing of microfluidic devices targeting high-pressure liquid-phase separations

Ali Amini, Thomas Themelis, Heidi Ottevaere, Jelle De Vos and Sebastiaan Eeltink

Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06256-w

Warpage correction for vat photopolymerization 3D printing

Taehyub Lee, Chin Siang Ng and Pei-Chen Su

Additive Manufacturing, 2025, 102, 104740
DOI: 10.1016/j.addma.2025.104740

Easy-to-perform and cost-effective fabrication of continuous-flow reactors and their application for nanomaterials synthesis

Domenico Andrea Cristaldi, Fatih Yanar, Ali Mosayyebi, Pablo García-Manrique, Eugen Stulz, Dario Carugo and Xunli Zhang

New Biotechnology, 2018, 47, 1
DOI: 10.1016/j.nbt.2018.02.002

Nanoporous, Gas Permeable PEGDA Ink for 3D Printing Organ‐on‐a‐Chip Devices

Vahid Karamzadeh, Molly L. Shen, Houda Shafique, Felix Lussier and David Juncker

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202315035

Process optimization and optimal tolerancing to improve dimensional accuracy of vat-photopolymerized functionally graded hydrogels

Muhammed Hisham, G. Saravana Kumar and Abhijit P. Deshpande

Results in Engineering, 2022, 14, 100442
DOI: 10.1016/j.rineng.2022.100442

Fabrication and Characterization of 3D Printed Thin Plates for Acoustic Metamaterials Applications

Cecilia Casarini, Vicent Romero-Garcia, Jean-Philippe Groby, Benjamin Tiller, James F. C. Windmill and Joseph C. Jackson

IEEE Sensors J., 2019, 19, 10365
DOI: 10.1109/JSEN.2019.2933322

Growing three-dimensional objects with light

Gabriel Lipkowitz, Max A. Saccone, Matthew A. Panzer, Ian A. Coates, Kaiwen Hsiao, Daniel Ilyn, Jason M. Kronenfeld, John R. Tumbleston, Eric S. G. Shaqfeh and Joseph M. DeSimone

Proc. Natl. Acad. Sci. U.S.A., 2024, 121
DOI: 10.1073/pnas.2303648121

Microfluidic System for Cell Mixing and Particle Focusing Using Dean Flow Fractionation

Alexander Wiede, Ondrej Stranik, Astrid Tannert and Ute Neugebauer

Micro, 2023, 3, 671
DOI: 10.3390/micro3030047

Impact of Beam Shape on Print Accuracy in Digital Light Processing Additive Manufacture

Andrew Reid and James Windmill

3D Printing and Additive Manufacturing, 2024, 11, 517
DOI: 10.1089/3dp.2022.0193

Accuracy of CAD/CAM-fabricated bite splints: milling vs 3D printing

Reymus Marcel, Hickel Reinhard and Keßler Andreas

Clin Oral Invest, 2020, 24, 4607
DOI: 10.1007/s00784-020-03329-x

3D Printing, Ink Casting and Micromachined Lamination (3D PICLμM): A Makerspace Approach to the Fabrication of Biological Microdevices

Avra Kundu, Tariq Ausaf and Swaminathan Rajaraman

Micromachines, 2018, 9, 85
DOI: 10.3390/mi9020085

Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing

Qiang Zhang, Shayuan Weng, Craig M. Hamel, S. Macrae Montgomery, Jiangtao Wu, Xiao Kuang, Kun Zhou and H. Jerry Qi

Extreme Mechanics Letters, 2021, 48, 101403
DOI: 10.1016/j.eml.2021.101403

Additive manufacturing by digital light processing: a review

Rajat Chaudhary, Paride Fabbri, Enrico Leoni, Francesca Mazzanti, Raziyeh Akbari and Carlo Antonini

Prog Addit Manuf, 2023, 8, 331
DOI: 10.1007/s40964-022-00336-0

3D‐printing of highly translucent ORMOCER®‐based resin using light absorber for high dimensional accuracy

Carina Kolb, Nils Lindemann, Herbert Wolter and Gerhard Sextl

J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.49691

Advancing the applications of 3D printed microfluidics: Utilizing quantum dots to measure internal temperature

Derek Sanchez, Robert Macdonald, Brendan Mitchell, James Wade, McKay Wilkerson, Hunter Hinnen, Marshall Rawlins, Gregory P. Nordin, Adam T. Woolley and Troy R. Munro

International Journal of Heat and Mass Transfer, 2025, 252, 127395
DOI: 10.1016/j.ijheatmasstransfer.2025.127395