Investigation of effects of design parameters on the internal short-circuit in cylindrical lithium-ion batteries

Jun Xu, Yijing Wu and Sha Yin

RSC Adv., 2017, 7, 14360
DOI: 10.1039/C6RA27892B

Degradation of battery separators under charge–discharge cycles

X. Zhang, J. Zhu and E. Sahraei

RSC Adv., 2017, 7, 56099
DOI: 10.1039/C7RA11585G

Adhesion strength of the cathode in lithium-ion batteries under combined tension/shear loadings

Hailing Luo, Juner Zhu, Elham Sahraei and Yong Xia

RSC Adv., 2018, 8, 3996
DOI: 10.1039/C7RA12382E

Dynamic impact response of lithium-ion batteries, constitutive properties and failure model

Golriz Kermani and Elham Sahraei

RSC Adv., 2019, 9, 2464
DOI: 10.1039/C8RA08898E

Criteria and design guidance for lithium-ion battery safety from a material perspective

Huacui Wang, Yongjun Pan, Xin Liu, Yangzheng Cao, Yue Liu, Xiaoxi Zhang, Ya Mao and Binghe Liu

J. Mater. Chem. A, 2022, 10, 6538
DOI: 10.1039/D1TA09291J

A single-crystal nickel-rich material as a highly stable cathode for lithium-ion batteries

Aihua Ran, Shuxiao Chen, Ming Cheng, Zheng Liang, Baohua Li, Guangmin Zhou, Feiyu Kang, Xuan Zhang and Guodan Wei

J. Mater. Chem. A, 2022, 10, 19680
DOI: 10.1039/D2TA01186G

Characterization of in-situ material properties of pouch lithium-ion batteries in tension from three-point bending tests

Mohammad M. Keshavarzi, Mehdi Gilaki and Elham Sahraei

International Journal of Mechanical Sciences, 2022, 219, 107090
DOI: 10.1016/j.ijmecsci.2022.107090

Internal Short Circuit Analysis of Cylindrical Lithium-Ion Cells Due to Structural Failure

Muhammad Sheikh, Mohab Elmarakbi, Sheikh Rehman and Ahmed Elmarakbi

J. Electrochem. Soc., 2021, 168, 030526
DOI: 10.1149/1945-7111/abec54

A fast‐validated computational model for cylindrical lithium‐ion batteries under multidirectional mechanical loading

Xue Xia and Liang Tang

Int J Energy Res, 2021, 45, 4410
DOI: 10.1002/er.6112

Failure behaviours of 100% SOC lithium-ion battery modules under different impact loading conditions

Yong Xia, Guanhua Chen, Qing Zhou, Xiangnan Shi and Fangyuan Shi

Engineering Failure Analysis, 2017, 82, 149
DOI: 10.1016/j.engfailanal.2017.09.003

A stack pressure based equivalent mechanical model of lithium-ion pouch batteries

Yihui Jiang, Jun Xu, Wenlong Hou and Xuesong Mei

Energy, 2021, 221, 119804
DOI: 10.1016/j.energy.2021.119804

Investigation on the blanking properties of thin multi-layer electrode of lithium-ion battery

Hao Ou, Hanlin Peng, Lei Shi, Ullah Ismat, Wancheng Zhang and Xianglin Zhang

Journal of Physics and Chemistry of Solids, 2019, 134, 14
DOI: 10.1016/j.jpcs.2019.05.033

Mechanical Deformation of Lithium-Ion Pouch Cells under In-Plane Loads—Part I: Experimental Investigation

Juner Zhu, Marco Miguel Koch, Junhe Lian, Wei Li and Tomasz Wierzbicki

J. Electrochem. Soc., 2020, 167, 090533
DOI: 10.1149/1945-7111/ab8e83

Mechanical characterization and modeling of microstructural deformation of Si anode sheet

Kazuma Ogata, Wenxia Tan, Yoshinori Takano, Akio Yonezu and Jun Xu

Journal of Power Sources, 2023, 580, 233442
DOI: 10.1016/j.jpowsour.2023.233442

Computational model of 18650 lithium-ion battery with coupled strain rate and SOC dependencies

Jun Xu, Binghe Liu, Xinyi Wang and Dayong Hu

Applied Energy, 2016, 172, 180
DOI: 10.1016/j.apenergy.2016.03.108

Precise and fast safety risk classification of lithium-ion batteries based on machine learning methodology

Yikai Jia, Jiani Li, Weiran Yao, Yangxing Li and Jun Xu

Journal of Power Sources, 2022, 548, 232064
DOI: 10.1016/j.jpowsour.2022.232064

Solid‐State Electrolyte Materials for Sodium Batteries: Towards Practical Applications

Qianli Ma and Frank Tietz

ChemElectroChem, 2020, 7, 2693
DOI: 10.1002/celc.202000164

Chemomechanics of Rechargeable Batteries: Status, Theories, and Perspectives

Luize Scalco de Vasconcelos, Rong Xu, Zhengrui Xu, Jin Zhang, Nikhil Sharma, Sameep Rajubhai Shah, Jiaxiu Han, Xiaomei He, Xianyang Wu, Hong Sun, Shan Hu, Madison Perrin, Xiaokang Wang, Yijin Liu, Feng Lin, Yi Cui and Kejie Zhao

Chem. Rev., 2022, 122, 13043
DOI: 10.1021/acs.chemrev.2c00002

Failure mechanism and predictive model of lithium-ion batteries under extremely high transient impact

Da Yu, Dongsheng Ren, Keren Dai, He Zhang, Jinming Zhang, Benqiang Yang, Shaojie Ma, Xiaofeng Wang and Zheng You

Journal of Energy Storage, 2021, 43, 103191
DOI: 10.1016/j.est.2021.103191

A Large Deformation and Fracture Model of Lithium-Ion Battery Cells Treated as a Homogenized Medium

Wei Li and Juner Zhu

J. Electrochem. Soc., 2020, 167, 120504
DOI: 10.1149/1945-7111/aba936

Electrical Response of Mechanically Damaged Lithium-Ion Batteries

Damoon Soudbakhsh, Mehdi Gilaki, William Lynch, Peilin Zhang, Taeyoung Choi and Elham Sahraei

Energies, 2020, 13, 4284
DOI: 10.3390/en13174284

Performance evaluation of lithium-ion batteries (LiFePO4 cathode) from novel perspectives using a new figure of merit, temperature distribution analysis, and cell package analysis

Sungyoung Song, Stig Munk-Nielsen, Vaclav Knap and Christian Uhrenfeldt

Journal of Energy Storage, 2021, 44, 103413
DOI: 10.1016/j.est.2021.103413

Experimental and modeling approaches for electric vehicle battery safety: a technical review

Teng Long, Leyu Wang and Cing-Dao Kan

Eng. Res. Express, 2024, 6, 032503
DOI: 10.1088/2631-8695/ad734d

Mechanism of the dynamic behaviors and failure analysis of lithium-ion batteries under crushing based on stress wave theory

Huajie Zhang, Mingzhe Zhou, Lingling Hu and Ziwen Zhang

Engineering Failure Analysis, 2020, 108, 104290
DOI: 10.1016/j.engfailanal.2019.104290

Sandwich Structure Design of a Cooling Fin for Battery Modules Against Impact Loads

Zitong Shi, Guanhua Chen, Lingxiao Zhu, Jie Li and Yong Xia

Automot. Innov., 2020, 3, 260
DOI: 10.1007/s42154-020-00107-z

X-Ray Computed Tomography for Failure Mechanism Characterisation within Layered Pouch Cells: Part II

Drasti Patel, Hamish Reid, Sarah Ball, Dan J. L. Brett and Paul R. Shearing

Johnson Matthey Technology Review, 2023, 67, 47
DOI: 10.1595/205651323X16686891950941

Different mechanical-electrochemical coupled failure mechanism and safety evaluation of lithium-ion pouch cells under dynamic and quasi-static mechanical abuse

Mingzhe Zhou, Lingling Hu, Shengru Chen and Xin Zhao

Journal of Power Sources, 2021, 497, 229897
DOI: 10.1016/j.jpowsour.2021.229897

Mechanical damage in a lithium-ion pouch cell under indentation loads

Hailing Luo, Yong Xia and Qing Zhou

Journal of Power Sources, 2017, 357, 61
DOI: 10.1016/j.jpowsour.2017.04.101

Mechanical issues of lithium-ion batteries in road traffic conditions: A review

Yue Liu, Yongjun Pan, Huacui Wang, Honggang Li, Huanhuan Bao, Zhiwei Zhao and Binghe Liu

Thin-Walled Structures, 2024, 201, 111985
DOI: 10.1016/j.tws.2024.111985

Dynamic Mechanical Compression Impulse of Lithium-Ion Pouch Cells

Alon Ratner, Richard Beaumont and Iain Masters

Energies, 2020, 13, 2105
DOI: 10.3390/en13082105

Model-Based Design of an Electric Bus Lithium-Ion Battery Pack

Mehdi Gilaki, Robert Walsh and Elham Sahraei

Journal of Electrochemical Energy Conversion and Storage, 2021, 18
DOI: 10.1115/1.4050337

Validation of Sahraei Failure Criterion on cylindrical and pouch Lithium-ion battery cells

Yihan Song, Marian Bulla, Huzefa Patanwala and Elham Sahraei

Journal of Energy Storage, 2024, 94, 112371
DOI: 10.1016/j.est.2024.112371

Application of electron backscatter diffraction techniques to quantify effects of aging on sub-grain and spatial heterogeneity in NMC cathodes

Kae Fink, Drew J. Pereira, Helio R. Moutinho, Patrick Walker, Joshua Major, Mowafak M. Al-Jassim and Shriram Santhanagopalan

Energy Storage Materials, 2022, 44, 342
DOI: 10.1016/j.ensm.2021.10.018

Risk analysis for marine transport and power applications of lithium ion batteries: A review

Rui Yin, Min Du, Fulin Shi, Zhixing Cao, Wanqing Wu, Haokun Shi and Qinggong Zheng

Process Safety and Environmental Protection, 2024, 181, 266
DOI: 10.1016/j.psep.2023.11.015

X-Ray Computed Tomography for Failure Mechanism Characterisation within Layered Pouch Cells: Part I

Drasti Patel, Hamish Reid, Sarah Ball, Dan J. L. Brett and Paul R. Shearing

Johnson Matthey Technology Review, 2023, 67, 36
DOI: 10.1595/205651322X16595441894422

Coupled Multiphysics Modeling of Lithium-Ion Batteries for Automotive Crashworthiness Applications

Anudeep Mallarapu, Inaki Çaldichoury, Pierre L'Eplattenier, Nathaniel Sunderlin and Shriram Santhanagopalan

Journal of Electrochemical Energy Conversion and Storage, 2025, 22
DOI: 10.1115/1.4066019

Review: Characterization and Modeling of the Mechanical Properties of Lithium-Ion Batteries

Golriz Kermani and Elham Sahraei

Energies, 2017, 10, 1730
DOI: 10.3390/en10111730

A Coupled Electrochemical-Thermal Failure Model for Predicting the Thermal Runaway Behavior of Lithium-Ion Batteries

Xuning Feng, Xiangming He, Minggao Ouyang, Li Wang, Languang Lu, Dongsheng Ren and Shriram Santhanagopalan

J. Electrochem. Soc., 2018, 165, A3748
DOI: 10.1149/2.0311816jes

Deformation of lithium-ion batteries under axial loading: Analytical model and Representative Volume Element

Golriz Kermani, Mohammad Mehdi Keshavarzi and Elham Sahraei

Energy Reports, 2021, 7, 2849
DOI: 10.1016/j.egyr.2021.05.015

Working temperature effects on mechanical integrity of cylindrical lithium-ion batteries

Fuhao Mo, Ye Tian, Siqi Zhao, Zhi Xiao and Zhiling Ma

Engineering Failure Analysis, 2022, 137, 106399
DOI: 10.1016/j.engfailanal.2022.106399

Integrated computation model of lithium-ion battery subject to nail penetration

Binghe Liu, Sha Yin and Jun Xu

Applied Energy, 2016, 183, 278
DOI: 10.1016/j.apenergy.2016.08.101

Artificial Neural Network–Based Multisensor Monitoring System for Collision Damage Assessment of Lithium‐Ion Battery Cells

Jian Zhang, Dian Lv and Alessandro Simeone

Energy Tech, 2020, 8
DOI: 10.1002/ente.202000031

Modeling state-of-charge dependent mechanical response of lithium-ion batteries with volume expansion

Mehdi Gilaki and Elham Sahraei

Energy Reports, 2024, 12, 3607
DOI: 10.1016/j.egyr.2024.09.041

Case Study of Repeatability, Different Speeds, and Different SOCs on Battery Squeeze Test

Xutong Ren, Jianfeng Wang, Na Yang, Mengyu Shi, Fen Liu and Fuqiang Wang

Batteries, 2022, 8, 243
DOI: 10.3390/batteries8110243

Power supply for the projectile-borne electromechanical system: A review

Da Yu, Xiangyu Han, Wenrui Wang, He Zhang, Peixun Xiong and Keren Dai

Green Energy and Intelligent Transportation, 2025, 100256
DOI: 10.1016/j.geits.2025.100256

Effects of electrolyte, loading rate and location of indentation on mechanical integrity of li-ion pouch cells

Brandy Dixon, Amber Mason and Elham Sahraei

Journal of Power Sources, 2018, 396, 412
DOI: 10.1016/j.jpowsour.2018.06.042

Dynamic failure analysis of lithium-ion battery under high-velocity impact using the FE-SPH based simulation

Huang Kang, Xiaowei Chen and Xiangbiao Liao

International Journal of Impact Engineering, 2025, 202, 105319
DOI: 10.1016/j.ijimpeng.2025.105319

Evaluation of Modelling and Simulation Strategies to Investigate the Mechanical Integrity of a Battery Cell Using Finite Element Methods

Shraddha Suhas Kulkarni, Filip Vysoudil and Thomas Vietor

Energies, 2021, 14, 2976
DOI: 10.3390/en14112976

Modeling and Dynamic Impact Analysis of Prismatic Lithium-Ion Battery

Dongchen Qin, Peizhuo Wang, Tingting Wang and Jiangyi Chen

Sustainability, 2023, 15, 8414
DOI: 10.3390/su15108414

Modeling of separator failure in lithium-ion pouch cells under compression

Abhishek Sarkar, Pranav Shrotriya and Abhijit Chandra

Journal of Power Sources, 2019, 435, 226756
DOI: 10.1016/j.jpowsour.2019.226756

Probing of Internal Short Circuit in Lithium-Ion Pouch Cells by Electrochemical Impedance Spectroscopy under Mechanical Abusive Conditions

Naresh Kumar Thangavel, Sanket Mundhe, Md Mahbubul Islam, Golam Newaz and Leela Mohana Reddy Arava

J. Electrochem. Soc., 2020, 167, 160553
DOI: 10.1149/1945-7111/abd452

Deformation and failure characteristics of four types of lithium-ion battery separators

Xiaowei Zhang, Elham Sahraei and Kai Wang

Journal of Power Sources, 2016, 327, 693
DOI: 10.1016/j.jpowsour.2016.07.078

Rolled electrodeposited copper foil with modified surface morphology as anode current collector for high performance lithium-ion batteries

Jingqi Chen, Xiaogong Wang, Haitao Gao, Shu Yan, Shoudong Chen, Xianghua Liu and Xianlei Hu

Surface and Coatings Technology, 2021, 410, 126881
DOI: 10.1016/j.surfcoat.2021.126881

Characterization of Aged Li-Ion Battery Components for Direct Recycling Process Design

Kae Fink, Shriram Santhanagopalan, Julia Hartig and Lei Cao

J. Electrochem. Soc., 2019, 166, A3775
DOI: 10.1149/2.0781915jes

Data‐Driven Safety Risk Prediction of Lithium‐Ion Battery

Yikai Jia, Jiani Li, Chunhao Yuan, Xiang Gao, Weiran Yao, Minwoo Lee and Jun Xu

Advanced Energy Materials, 2021, 11
DOI: 10.1002/aenm.202003868

Elliptical lithium‐ion batteries: Transverse and axial loadings under wet/dry conditions

Golriz Kermani, Brandy Dixon and Elham Sahraei

Energy Science & Engineering, 2019, 7, 890
DOI: 10.1002/ese3.318

Detailed Layered Nonlinear Finite Element Analysis for Lithium-Ion Battery Cells to Predict Internal Short Circuits Due to Separator Fractures under Hemisphere Indentation

Dong-Chan Lee and Chang-Wan Kim

J. Electrochem. Soc., 2020, 167, 120511
DOI: 10.1149/1945-7111/abaa19

Coupling Effect of State-of-Charge and Strain Rate on the Mechanical Behavior of Electrodes of 21700 Lithium-Ion Battery

Aditya Sonwane, Chunhao Yuan and Jun Xu

Journal of Electrochemical Energy Conversion and Storage, 2021, 18
DOI: 10.1115/1.4049042

A review of the mechanical integrity and electrochemical performance of flexible lithium-ion batteries

Ahmad Shokrieh, Amir Hossein Mirzaei, Lijuan Mao, Mahmood M. Shokrieh and Zhixiang Wei

Nano Res., 2023, 16, 12962
DOI: 10.1007/s12274-023-6211-z

A Review of Multiscale Mechanical Failures in Lithium-Ion Batteries: Implications for Performance, Lifetime and Safety

Senming Wu, Ying Chen, Weiling Luan, Haofeng Chen, Liping Huo, Meng Wang and Shan-tung Tu

Electrochem. Energy Rev., 2024, 7
DOI: 10.1007/s41918-024-00233-w

Mechanical behavior analysis of high power commercial lithium-ion batteries

Ruicheng Shen, Shaojun Niu, Guobin Zhu, Kai Wu and Honghe Zheng

Chinese Journal of Chemical Engineering, 2023, 58, 315
DOI: 10.1016/j.cjche.2022.10.017

Influence of loading rate and out of plane direction dependence on deformation and electro-mechanical failure behavior of a lithium-ion pouch cell

Marco Raffler, Wolfgang Sinz, Simon Erker, Bernhard Brunnsteiner and Christian Ellersdorfer

Journal of Energy Storage, 2022, 56, 105906
DOI: 10.1016/j.est.2022.105906

Modelling and simulation of high- and low-speed impact damage of lithium batteries for light and small UAVs

Yongjie Zhang, Zhiwen Li, Yingjie Huang, Bo Cui, Jingpiao Zhou and Yazhou Guo

International Journal of Impact Engineering, 2023, 180, 104703
DOI: 10.1016/j.ijimpeng.2023.104703

A simulation-based probabilistic framework for lithium-ion battery modelling

Arvind Rajan, V. Vijayaraghavan, Melanie Po-Leen Ooi, Akhil Garg and Ye Chow Kuang

Measurement, 2018, 115, 87
DOI: 10.1016/j.measurement.2017.10.033

Failure behavior of prismatic Li-ion battery cells under abuse loading condition - A combined experimental and computational study

Feng Zhu, Runzhou Zhou, David Sypeck, Jie Deng and Chulheung Bae

Journal of Energy Storage, 2022, 48, 103969
DOI: 10.1016/j.est.2022.103969

Homogenized pouch cell material modelling and a comparison study

Osman Orhan and Adnan Özel

Int J Energy Res, 2021, 45, 2668
DOI: 10.1002/er.5959

Lithium-ion cell response to mechanical abuse: Three-point bend

Johanna K. Stark Goodman, Jay T. Miller, Steven Kreuzer, Joel Forman, Sungun Wi, Jae-man Choi, Bookeun Oh and Kevin White

Journal of Energy Storage, 2020, 28, 101244
DOI: 10.1016/j.est.2020.101244

A modelling approach for laser welding of busbars to lithium-ion prismatic cell terminals to enhance failure prediction

Nikhil Kumar, Richard Beaumont, Javier Sanguesa Gomez, Christopher Harris and Iain Masters

Optics & Laser Technology, 2024, 176, 110989
DOI: 10.1016/j.optlastec.2024.110989

A universal anisotropic model for a lithium‐ion cylindrical cell validated under axial, lateral, and bending loads

Yihan Song, Mehdi Gilaki, Mohammad Mehdi Keshavarzi and Elham Sahraei

Energy Science & Engineering, 2022, 10, 1431
DOI: 10.1002/ese3.1111

Bending Detection of Li-Ion Pouch Cells Using Impedance Spectra

Mohsen Derakhshan, Mehdi Gilaki, Andrew Stacy, Elham Sahraei and Damoon Soudbakhsh

ASME Letters in Dynamic Systems and Control, 2021, 1
DOI: 10.1115/1.4049527

Anisotropic expansion-induced stress analysis of cylindrical Li-ion batteries

Sai Dinesh Gelam, Sahithi Maddipatla, Carmen Chicone and Michael Pecht

Journal of Power Sources, 2025, 656, 238104
DOI: 10.1016/j.jpowsour.2025.238104

Deformation and failure mechanisms of 18650 battery cells under axial compression

Juner Zhu, Xiaowei Zhang, Elham Sahraei and Tomasz Wierzbicki

Journal of Power Sources, 2016, 336, 332
DOI: 10.1016/j.jpowsour.2016.10.064

Dynamic mechanical behavior of lithium-ion pouch cells subjected to high-velocity impact

Yanyu Chen, Shriram Santhanagopalan, Venkatesh Babu and Yi Ding

Composite Structures, 2019, 218, 50
DOI: 10.1016/j.compstruct.2019.03.046

Mechanism of strengthening of battery resistance under dynamic loading

Juner Zhu, Hailing Luo, Wei Li, Tao Gao, Yong Xia and Tomasz Wierzbicki

International Journal of Impact Engineering, 2019, 131, 78
DOI: 10.1016/j.ijimpeng.2019.05.003

Finite element model approach of a cylindrical lithium ion battery cell with a focus on minimization of the computational effort and short circuit prediction

Marco Raffler, Alessio Sevarin, Christian Ellersdorfer, Simon F. Heindl, Christoph Breitfuss and Wolfgang Sinz

Journal of Power Sources, 2017, 360, 605
DOI: 10.1016/j.jpowsour.2017.06.028

Thermal runaway detection of cylindrical 18650 lithium-ion battery under quasi-static loading conditions

Muhammad Sheikh, Ahmed Elmarakbi and Mustafa Elkady

Journal of Power Sources, 2017, 370, 61
DOI: 10.1016/j.jpowsour.2017.10.013

Investigation of the deformation mechanisms of lithium-ion battery components using in-situ micro tests

Juner Zhu, Xiaowei Zhang, Hailing Luo and Elham Sahraei

Applied Energy, 2018, 224, 251
DOI: 10.1016/j.apenergy.2018.05.007

A comprehensive review on thermal runaway model of a lithium-ion battery: Mechanism, thermal, mechanical, propagation, gas venting and combustion

Jiaqiang E, Hanxu Xiao, Sicheng Tian and Yuxin Huang

Renewable Energy, 2024, 229, 120762
DOI: 10.1016/j.renene.2024.120762

Internal short circuit detection in Li-ion batteries using supervised machine learning

Arunava Naha, Ashish Khandelwal, Samarth Agarwal, Piyush Tagade, Krishnan S. Hariharan, Anshul Kaushik, Ankit Yadu, Subramanya Mayya Kolake, Seongho Han and Bookeun Oh

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-58021-7

A hybrid approach to derive macro- and meso-mechanic cell models for vibrational investigations of lithium-ion pouch cells

Pius Sonnberger, Marco Behmer, Elmar Böhler and Christoph Breitfuss

Journal of Energy Storage, 2022, 49, 104060
DOI: 10.1016/j.est.2022.104060

Mechanical Properties of Prismatic Li-Ion Batteries—Electrodes, Cells, and Stacks

Elham Sahraei, Mohammad Mehdi Keshavarzi, Xiaowei Zhang and Benjamin Lai

Journal of Electrochemical Energy Conversion and Storage, 2022, 19
DOI: 10.1115/1.4054823

Homogenized characterization of cylindrical Li‐ion battery cells using elliptical approximation

Mehdi Gilaki, Yihan Song and Elham Sahraei

Intl J of Energy Research, 2022, 46, 5908
DOI: 10.1002/er.7531

State of Charge Dependent Constitutive Model of the Jellyroll of Cylindrical Lithium-Ion Cells

Wenwei Wang, Sheng Yang, Cheng Lin and Yiding Li

IEEE Access, 2018, 6, 26358
DOI: 10.1109/ACCESS.2018.2825466

Dynamic impact tests on lithium-ion cells

Thomas Kisters, Elham Sahraei and Tomasz Wierzbicki

International Journal of Impact Engineering, 2017, 108, 205
DOI: 10.1016/j.ijimpeng.2017.04.025

Failure in lithium-ion batteries under transverse indentation loading

Seung Hyun Chung, Thomas Tancogne-Dejean, Juner Zhu, Hailing Luo and Tomasz Wierzbicki

Journal of Power Sources, 2018, 389, 148
DOI: 10.1016/j.jpowsour.2018.04.003

Crushing stress and vibration fatigue-life optimization of a battery-pack system

Xiaoxi Zhang, Yue Xiong, Yongjun Pan, Haifeng Du and Binghe Liu

Struct Multidisc Optim, 2023, 66
DOI: 10.1007/s00158-023-03510-2

Crash Safety Design for Lithium-ion Vehicle Battery Module with Machine Learning

Feng Zhu and Krishna Logakannan

SAE Int. J. Adv. & Curr. Prac. in Mobility, 2022, 4, 1667
DOI: 10.4271/2022-01-0863

Dynamic behavior and modeling of prismatic lithium‐ion battery

Xiaoping Chen, Tao Wang, Yu Zhang, Hongbo Ji, Yingping Ji, Quan Yuan and Ling Li

Int J Energy Res, 2020, 44, 2984
DOI: 10.1002/er.5126

Designing Safe Battery Modules: An Interdisciplinary Approach

Anudeep Mallarapu, Jinyong Kim, Nathaniel Sunderlin, Kae Fink, Ryan Brow, Shriram Santhanagopalan and Kenji Takahashi

SSRN Journal, 2022
DOI: 10.2139/ssrn.4005791

Review of mechanical abuse related thermal runaway models of lithium-ion batteries at different scales

Yang Xiao, Faqing Yang, Zhenhai Gao, Mengjun Liu, Jie Wang, Zitao Kou, Yutong Lin, Yiyao Li, Liumiao Gao, Yu Chen, Sida Ren and Xinzhuo Li

Journal of Energy Storage, 2023, 64, 107145
DOI: 10.1016/j.est.2023.107145

Unravelling the safety improving and failure mechanisms of a 56.5 Ah high-energy–density Li-ion cell containing solid-state electrolyte

Wei Zhang, Xiaopeng Qi, Min Liu, Bingxue Liu, Yuansen Hu, Jing Ye, Rennian Wang, Bin Li, Changhong Wang, Qian Huang, Bing Yu, Rong Yang, Bin Gou, Jiantao Wang and Ran Xu

Chemical Engineering Journal, 2024, 487, 150458
DOI: 10.1016/j.cej.2024.150458

Testing and Modeling the Mechanical Properties of the Granular Materials of Graphite Anode

Juner Zhu, Wei Li, Yong Xia and Elham Sahraei

J. Electrochem. Soc., 2018, 165, A1160
DOI: 10.1149/2.0141807jes

Effect of packaging and cooling plates on mechanical response and failure characteristics of automotive Li-ion battery modules

Sergiy Kalnaus, Hsin Wang, Thomas R. Watkins, Abhishek Kumar, Srdjan Simunovic, John A. Turner and Phillip Gorney

Journal of Power Sources, 2018, 403, 20
DOI: 10.1016/j.jpowsour.2018.09.071

Modeling strategy for progressive failure prediction in lithium-ion batteries under mechanical abuse

Hanfeng Yin, Shuai Ma, Honggang Li, Guilin Wen, Shriram Santhanagopalan and Chao Zhang

eTransportation, 2021, 7, 100098
DOI: 10.1016/j.etran.2020.100098

A hyper-viscoelastic model for battery separators based on inverse-stress-solution parametrical calibration method

Yu Wang, Yuyang Xing and Q.M. Li

International Journal of Mechanical Sciences, 2022, 225, 107361
DOI: 10.1016/j.ijmecsci.2022.107361

Unlocking the coupling mechanical-electrochemical behavior of lithium-ion battery upon dynamic mechanical loading

Yikai Jia, Sha Yin, Binghe Liu, Hui Zhao, Huili Yu, Jie Li and Jun Xu

Energy, 2019, 166, 951
DOI: 10.1016/j.energy.2018.10.142

Toward a Safer Battery Management System: A Critical Review on Diagnosis and Prognosis of Battery Short Circuit

Rui Xiong, Suxiao Ma, Hailong Li, Fengchun Sun and Ju Li

iScience, 2020, 23, 101010
DOI: 10.1016/j.isci.2020.101010

Simulation of spatial strain inhomogeneities in lithium-ion-cells due to electrode dilation dependent on internal and external cell structures

Fabian Ebert, Markus Spielbauer, Maximilian Bruckmoser and Markus Lienkamp

Journal of Energy Storage, 2022, 49, 104143
DOI: 10.1016/j.est.2022.104143

Li-ion Battery Separators, Mechanical Integrity and Failure Mechanisms Leading to Soft and Hard Internal Shorts

Xiaowei Zhang, Elham Sahraei and Kai Wang

Sci Rep, 2016, 6
DOI: 10.1038/srep32578

A coupled thermal–electrical–mechanical analysis for lithium-ion battery

Leyu Wang, Chenxi Ling, Cing-Dao Kan and Chi Yang

J. Micromech. Mol. Phys., 2022, 07, 61
DOI: 10.1142/S2424913021420108

Progress in battery safety modeling

Jie Deng, Chulheung Bae, Adam Denlinger and Theodore Miller

Prog. Energy, 2022, 4, 043001
DOI: 10.1088/2516-1083/ac8333

Data-driven short circuit resistance estimation in battery safety issues

Yikai Jia and Jun Xu

Journal of Energy Chemistry, 2023, 79, 37
DOI: 10.1016/j.jechem.2022.12.035

Modeling of Dynamic Mechanical Response of Li-Ion cells with Homogenized Electrolyte-Solid Interactions

Thomas Kisters, Mehdi Gilaki, Siegfried Nau and Elham Sahraei

Journal of Energy Storage, 2022, 49, 104069
DOI: 10.1016/j.est.2022.104069

Deformation and failure properties of cylindrical battery packs under quasi-static and dynamic indentations

Peng Zhao, Hongkai Xiao, Zhengping Sun and Yuanyuan Ding

International Journal of Impact Engineering, 2025, 199, 105239
DOI: 10.1016/j.ijimpeng.2025.105239

Experimental study of the impedance behavior of 18650 lithium-ion battery cells under deforming mechanical abuse

Markus Spielbauer, Philipp Berg, Michael Ringat, Oliver Bohlen and Andreas Jossen

Journal of Energy Storage, 2019, 26, 101039
DOI: 10.1016/j.est.2019.101039

Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review

Binghe Liu, Yikai Jia, Chunhao Yuan, Lubing Wang, Xiang Gao, Sha Yin and Jun Xu

Energy Storage Materials, 2020, 24, 85
DOI: 10.1016/j.ensm.2019.06.036

Dynamic response and failure evolution of pouch lithium-ion batteries under impact loading

Xin-chun Zhang, Li-rong Gu, Zi-xuan Huang, Yuan-jun Jin, Li-xiang Rao, Wen-rui Qi and Ying Liu

Engineering Failure Analysis, 2025, 179, 109791
DOI: 10.1016/j.engfailanal.2025.109791

Towards Determining an Engineering Stress-Strain Curve and Damage of the Cylindrical Lithium-Ion Battery Using the Cylindrical Indentation Test

George Z. Voyiadjis, Edris Akbari, Bartosz Łuczak and Wojciech Sumelka

Batteries, 2023, 9, 233
DOI: 10.3390/batteries9040233

Mechanical characterization and modeling for anodes and cathodes in lithium-ion batteries

Lubing Wang, Sha Yin, Chao Zhang, Yong Huan and Jun Xu

Journal of Power Sources, 2018, 392, 265
DOI: 10.1016/j.jpowsour.2018.05.007

Constitutive behavior and progressive mechanical failure of electrodes in lithium-ion batteries

Chao Zhang, Jun Xu, Lei Cao, Zenan Wu and Shriram Santhanagopalan

Journal of Power Sources, 2017, 357, 126
DOI: 10.1016/j.jpowsour.2017.04.103

Damage of prismatic lithium‐ion cells subject to bending: Test, model, and detection

Wei Li, Bobin Xing, Thomas R. Watkins, Yong Xia, Hsin Wang and Juner Zhu

EcoMat, 2022, 4
DOI: 10.1002/eom2.12257

Integrated framework for thermo-mechanical crash finite element analysis of 4680 lithium-ion battery cell and its strength prediction using neural networks

Abhimanyu Singh, Deepak Sharma and Poonam Kumari

Engineering Computations, 2025, 1
DOI: 10.1108/EC-10-2024-0975

Deformation and failure of lithium-ion batteries treated as a discrete layered structure

Juner Zhu, Wei Li, Tomasz Wierzbicki, Yong Xia and Jonathon Harding

International Journal of Plasticity, 2019, 121, 293
DOI: 10.1016/j.ijplas.2019.06.011

A coupled multi-physics study on Li-ion batteries under impact loading

Seyed Sajad Mirjavadi, Jiaqi Huang, Guoxing Lu and Grant P. Steven

Applied Energy, 2025, 396, 126239
DOI: 10.1016/j.apenergy.2025.126239

Numerical Modeling and Safety Design for Lithium-Ion Vehicle Battery Modules Subject to Crush Loading

Feng Zhu, Runzhou Zhou and David J. Sypeck

Energies, 2020, 14, 118
DOI: 10.3390/en14010118

Changes in the Mechanical Behavior of Electrically Aged Lithium-Ion Pouch Cells: In-Plane and Out-of-Plane Indentation Loads with Varying Testing Velocity and State of Charge

Marvin Sprenger, Georgi Kovachev, Norbert Dölle, Florian Schauwecker, Wolfgang Sinz and Christian Ellersdorfer

Batteries, 2023, 9, 67
DOI: 10.3390/batteries9020067

An analysis of the current state and obstacles in discrete layered finite element simulation of crushing cylindrical lithium-ion cells

Markus Spielbauer, Franziska Peteler, András Németh, Jonas Soellner, Philipp Berg, Oliver Bohlen and Andreas Jossen

Journal of Energy Storage, 2023, 72, 108029
DOI: 10.1016/j.est.2023.108029

Production of Sulfidic Cylindrical All-Solid-State Batteries

Santiago Navarro, Pascal Hennrich, Florian Steinlehner, Stefan W. Zangerle, Markus S. Ding and Rüdiger Daub

Procedia CIRP, 2025, 134, 199
DOI: 10.1016/j.procir.2025.03.049

Safety Performance and Failure Criteria of Lithium-Ion Batteries under Mechanical Abuse

Genwei Wang, Xuanfu Guo, Jingyi Chen, Pengfei Han, Qiliang Su, Meiqing Guo, Bin Wang and Hui Song

Energies, 2023, 16, 6346
DOI: 10.3390/en16176346

Influence of component properties on the mechanical response of lithium-ion battery jellyrolls subjected to indentation: Quick prediction and parametric study

Tianqi Zhao, Shan Zhang, Jan Teuwsen, Zhi Xu, Yong Xia and Yunlong Qu

Journal of Energy Storage, 2025, 122, 116612
DOI: 10.1016/j.est.2025.116612

A review of safety-focused mechanical modeling of commercial lithium-ion batteries

Juner Zhu, Tomasz Wierzbicki and Wei Li

Journal of Power Sources, 2018, 378, 153
DOI: 10.1016/j.jpowsour.2017.12.034

Influence of Breathing and Swelling on the Jelly-Roll Case Gap of Cylindrical Lithium-Ion Battery Cells

Markus Spielbauer, Marco Steinhardt, Jan Singer, Andreas Aufschläger, Oliver Bohlen and Andreas Jossen

Batteries, 2022, 9, 6
DOI: 10.3390/batteries9010006

Mechanical Deformation in Lithium-Ion Battery Electrodes: Modeling and Experiment

J. M. Foster, Y. Hahn, H. Patanwala, V. Oancea and E. Sahraei

Journal of Electrochemical Energy Conversion and Storage, 2025, 22
DOI: 10.1115/1.4065534

Investigation of Internal Short Circuits of Lithium-Ion Batteries under Mechanical Abusive Conditions

Sheng Yang, Wenwei Wang, Cheng Lin, Weixiang Shen and Yiding Li

Energies, 2019, 12, 1885
DOI: 10.3390/en12101885

Mechanical Deformation of Lithium-Ion Pouch Cells under in-plane Loads—Part II: Computational Modeling

Junhe Lian, Marco Koch, Wei Li, Tomasz Wierzbicki and Juner Zhu

J. Electrochem. Soc., 2020, 167, 090556
DOI: 10.1149/1945-7111/ab9eee

Development of a Detailed 3D Finite Element Model for a Lithium-Ion Battery Subject to Abuse Loading

Feng Zhu, Runzhou Zhou, David Sypeck, Jie Deng and Sangyeon Kim

SAE Int. J. Adv. & Curr. Prac. in Mobility, 2023, 5, 2373
DOI: 10.4271/2023-01-0007

Porosity variation of lithium-ion battery separators under uniaxial tension

Yu Wang, Q.M. Li and Yuyang Xing

International Journal of Mechanical Sciences, 2020, 174, 105496
DOI: 10.1016/j.ijmecsci.2020.105496

Thermal Runaway Induced Casing Rupture: Formation Mechanism and Effect on Propagation in Cylindrical Lithium Ion Battery Module

Li Lao, Yong Su, Qingchuan Zhang and Shangquan Wu

J. Electrochem. Soc., 2020, 167, 090519
DOI: 10.1149/1945-7111/ab8807

Superior Capacity in Electric Double-Layer Capacitors Employing Three-Dimensional Titanium Foam Electrodes

Gigap Han, Youngseok Song, Balamurugan Thirumalraj, Mincheol Beak, Csilla Kádár, Jenő Gubicza, Ho-Seok Nam, Kyungjung Kwon and Heeman Choe

Metall Mater Trans A, 2023, 54, 3620
DOI: 10.1007/s11661-023-07121-w

Large-Scale Li-Ion Battery Research and Application in Mining Industry

Lingyu Meng, Guofa Wang, Khay Wai See, Yunpeng Wang, Yong Zhang, Caiyun Zang, Rulin Zhou and Bin Xie

Energies, 2022, 15, 3884
DOI: 10.3390/en15113884