Loren E. Stallcop, Yasmín R. Álvarez-García, Ana M. Reyes-Ramos, Karla P. Ramos-Cruz, Molly M. Morgan, Yatao Shi, Lingjun Li, David J. Beebe, Maribella Domenech and Jay W. Warrick

Lab Chip, 2018, 18, 451
DOI: 10.1039/C7LC00724H

Rapid and inexpensive microfluidic electrode integration with conductive ink

David McIntyre, Ali Lashkaripour and Douglas Densmore

Lab Chip, 2020, 20, 3690
DOI: 10.1039/D0LC00763C

Investigation and comparison of resin materials in transparent DLP-printing for application in cell culture and organs-on-a-chip

Anna Fritschen, Alena K. Bell, Inga Königstein, Lukas Stühn, Robert W. Stark and Andreas Blaeser

Biomater. Sci., 2022, 10, 1981
DOI: 10.1039/D1BM01794B

Integrative optofluidic microcavity with tubular channels and coupled waveguides via two-photon polymerization

Yonglei Li, Yangfu Fang, Jiao Wang, Lu Wang, Shiwei Tang, Chunping Jiang, Lirong Zheng and Yongfeng Mei

Lab Chip, 2016, 16, 4406
DOI: 10.1039/C6LC01148A

3D printing of droplet microfluidic devices: principles, wetting control, scale-up, and beyond

Je Hyun Lee, Taesoo Jang, Soeun Park, Su-Bin Shin, Jaemoon Lee, Yoon-Ho Hwang and Hyomin Lee

Lab Chip, 2026, 26, 1219
DOI: 10.1039/D5LC01011J

Engineering 3D parallelized microfluidic droplet generators with equal flow profiles by computational fluid dynamics and stereolithographic printing

Tom Kamperman, Liliana Moreira Teixeira, Seyedeh Sarah Salehi, Greet Kerckhofs, Yann Guyot, Mike Geven, Liesbet Geris, Dirk Grijpma, Sebastien Blanquer and Jeroen Leijten

Lab Chip, 2020, 20, 490
DOI: 10.1039/C9LC00980A

A mini-panel PET scanner-based microfluidic radiobioassay system allowing high-throughput imaging of real-time cellular pharmacokinetics

Zhen Liu, Pengfei Zhang, Hao Ji, Yu Long, Boping Jing, Lu Wan, Daoming Xi, Rui An and Xiaoli Lan

Lab Chip, 2020, 20, 1110
DOI: 10.1039/C9LC01066A

Broadening the absorption bandwidth by novel series–parallel cross convex–concave structures

Hui Mei, Dou Yang, Li Yao, Wenqiang Yang, Xing Zhao, Yongtao Yao, Laifei Cheng, Litong Zhang and Konstantinos G. Dassios

J. Mater. Chem. C, 2021, 9, 5411
DOI: 10.1039/D1TC00371B

High-throughput 3D microfluidic chip for generation of concentration gradients and mixture combinations

Mingwei Zhao, Jing Yang, Zhenqing Li, Yuan Zeng, Chunxian Tao, Bo Dai, Dawei Zhang and Yoshinori Yamaguchi

Lab Chip, 2024, 24, 2280
DOI: 10.1039/D3LC00822C

Advancing transistor-based point-of-care (POC) biosensors: additive manufacturing technologies and device integration strategies for real-life sensing

Xiaoao Shi, Haihui Pu, Lewis L. Shi, Tong-Chuan He and Junhong Chen

Nanoscale, 2025, 17, 9804
DOI: 10.1039/D4NR04441J

Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices

Jia Ming Zhang, Andres A. Aguirre-Pablo, Er Qiang Li, Ulrich Buttner and Sigurdur T. Thoroddsen

RSC Adv., 2016, 6, 81120
DOI: 10.1039/C6RA11724D

A new droplet-forming fluidic junction for the generation of highly compartmentalised capsules

J. Li and D. A. Barrow

Lab Chip, 2017, 17, 2873
DOI: 10.1039/C7LC00618G

Droplet-based PCR in a 3D-printed microfluidic chip for miRNA-21 detection

Zhiqiang Jiao, Lei Zhao, Chu Tang, Hongyan Shi, Fu Wang and Bo Hu

Anal. Methods, 2019, 11, 3286
DOI: 10.1039/C9AY01108K

Toward practical application of paper-based microfluidics for medical diagnostics: state-of-the-art and challenges

Kentaro Yamada, Hiroyuki Shibata, Koji Suzuki and Daniel Citterio

Lab Chip, 2017, 17, 1206
DOI: 10.1039/C6LC01577H

An integrated micro-millifluidic processing system

Jia Ming Zhang, Qinglei Ji, Ying Liu, Jianyong Huang and Huiling Duan

Lab Chip, 2018, 18, 3393
DOI: 10.1039/C8LC00636A

3D-printed microfluidic devices: fabrication, advantages and limitations—a mini review

Chengpeng Chen, Benjamin T. Mehl, Akash S. Munshi, Alexandra D. Townsend, Dana M. Spence and R. Scott Martin

Anal. Methods, 2016, 8, 6005
DOI: 10.1039/C6AY01671E

Assessment of biocompatibility of 3D printed photopolymers using zebrafish embryo toxicity assays

N. P. Macdonald, F. Zhu, C. J. Hall, J. Reboud, P. S. Crosier, E. E. Patton, D. Wlodkowic and J. M. Cooper

Lab Chip, 2016, 16, 291
DOI: 10.1039/C5LC01374G

Utilizing ChatGPT to assist CAD design for microfluidic devices

Matt D. Nelson, Brady L. Goenner and Bruce K. Gale

Lab Chip, 2023, 23, 3778
DOI: 10.1039/D3LC00518F

Multi-level magnetic microrobot delivery strategy within a hierarchical vascularized organ-on-a-chip

Kangyi Lu, Chenyang Zhou, Zhangjie Li, Yijun Liu, Feifan Wang, Lian Xuan and Xiaolin Wang

Lab Chip, 2024, 24, 446
DOI: 10.1039/D3LC00770G

Kinetic analysis of the growth behavior of perovskite CsPbBr3 nanocrystals in a microfluidic system

Xiaobing Tang and Fuqian Yang

Lab Chip, 2022, 22, 2832
DOI: 10.1039/D2LC00331G

A portable droplet microfluidic device for cortisol measurements using a competitive heterogeneous assay

Gareth W. H. Evans, Wahida T. Bhuiyan, Susan Pang, Brett Warren, Kyriacos Makris, Sharon Coleman, Sammer-ul Hassan and Xize Niu

Analyst, 2021, 146, 4535
DOI: 10.1039/D1AN00671A

Recent advances in 3D models for multiparametric blood–brain barrier detection in microfluidic systems

Chiara Boncristiani, Alessia Di Gilio, Federica De Castro, Alessandra Nardini, Jolanda Palmisani, Rebeca Martínez Vázquez, Gianluigi de Gennaro, Francesco Paolo Fanizzi, Giuseppe Ciccarella and Viviana Vergaro

J. Mater. Chem. B, 2025, 13, 6597
DOI: 10.1039/D4TB02499K

3D-printed fluidic networks as vasculature for engineered tissue

Ian S. Kinstlinger and Jordan S. Miller

Lab Chip, 2016, 16, 2025
DOI: 10.1039/C6LC00193A

Fish-on-a-chip: microfluidics for zebrafish research

Fan Yang, Chuan Gao, Ping Wang, Guo-Jun Zhang and Zuanguang Chen

Lab Chip, 2016, 16, 1106
DOI: 10.1039/C6LC00044D

3D printing of microfluidic devices for paper-assisted direct spray ionization mass spectrometry

Lucas Costa Duarte, Thays Colletes de Carvalho, Eulício Oliveira Lobo-Júnior, Patrícia V. Abdelnur, Boniek G. Vaz and Wendell K. T. Coltro

Anal. Methods, 2016, 8, 496
DOI: 10.1039/C5AY03074A

Bridging the gap between development of point-of-care nucleic acid testing and patient care for sexually transmitted infections

Kuangwen Hsieh, Johan H. Melendez, Charlotte A. Gaydos and Tza-Huei Wang

Lab Chip, 2022, 22, 476
DOI: 10.1039/D1LC00665G

Tunable resins with PDMS-like elastic modulus for stereolithographic 3D-printing of multimaterial microfluidic actuators

Alireza Ahmadianyazdi, Isaac J. Miller and Albert Folch

Lab Chip, 2023, 23, 4019
DOI: 10.1039/D3LC00529A

Automation of cell culture assays using a 3D-printed servomotor-controlled microfluidic valve system

Steffen Winkler, Jannik Menke, Katharina V. Meyer, Carlotta Kortmann and Janina Bahnemann

Lab Chip, 2022, 22, 4656
DOI: 10.1039/D2LC00629D

Dynamic phase control with printing and fluidic materials' interaction by inkjet printing an RF sensor directly on a stereolithographic 3D printed microfluidic structure

Eiyong Park and Sungjoon Lim

Lab Chip, 2021, 21, 4364
DOI: 10.1039/D1LC00419K

Low-cost rapid prototyping and assembly of an open microfluidic device for a 3D vascularized organ-on-a-chip

Qinyu Li, Kai Niu, Ding Wang, Lian Xuan and Xiaolin Wang

Lab Chip, 2022, 22, 2682
DOI: 10.1039/D1LC00767J

Biocompatible 3D printed polymers via fused deposition modelling direct C2C12 cellular phenotype in vitro

Rowan P. Rimington, Andrew J. Capel, Steven D. R. Christie and Mark P. Lewis

Lab Chip, 2017, 17, 2982
DOI: 10.1039/C7LC00577F

A miniaturised 3D printed polypropylene reactor for online reaction analysis by mass spectrometry

Gianmario Scotti, Sofia M. E. Nilsson, Markus Haapala, Päivi Pöhö, Gustav Boije af Gennäs, Jari Yli-Kauhaluoma and Tapio Kotiaho

React. Chem. Eng., 2017, 2, 299
DOI: 10.1039/C7RE00015D

Achieving biocompatibility and tailoring mechanical properties of SLA 3D printed devices for microfluidic and cell culture applications

Matt D. Nelson, Patrick A. Tresco, Christian C. Yost and Bruce K. Gale

Lab Chip, 2024, 24, 4632
DOI: 10.1039/D4LC00354C

Optical approach to resin formulation for 3D printed microfluidics

Hua Gong, Michael Beauchamp, Steven Perry, Adam T. Woolley and Gregory P. Nordin

RSC Adv., 2015, 5, 106621
DOI: 10.1039/C5RA23855B

Microfluidic-based biomimetic models for life science research

Keqiu Jiang, Chengyong Dong, Yakun Xu and Liming Wang

RSC Adv., 2016, 6, 26863
DOI: 10.1039/C6RA05691A

3D-Printed seed planter and well array for high-throughput seed germination screening

Hui Hui Chai, Yao Lu, Can Fang, Ya Dan Li, Yue Jun Kang, Chang Ming Li and Ling Yu

Integr. Biol., 2018, 10, 67
DOI: 10.1039/C7IB00178A

SAXS on a chip: from dynamics of phase transitions to alignment phenomena at interfaces studied with microfluidic devices

Bruno F. B. Silva

Phys. Chem. Chem. Phys., 2017, 19, 23690
DOI: 10.1039/C7CP02736B

Liquid metal-based amalgamation-assisted lithography for fabrication of complex channels with diverse structures and configurations

Sheng Yan, Yuxing Li, Qianbin Zhao, Dan Yuan, Guolin Yun, Jun Zhang, Weijia Wen, Shi-Yang Tang and Weihua Li

Lab Chip, 2018, 18, 785
DOI: 10.1039/C8LC00047F

Direct 3D-printing of cell-laden constructs in microfluidic architectures

Justin Liu, Henry H. Hwang, Pengrui Wang, Grace Whang and Shaochen Chen

Lab Chip, 2016, 16, 1430
DOI: 10.1039/C6LC00144K

3D printing-enabled uniform temperature distributions in microfluidic devices

Derek Sanchez, Garrett Hawkins, Hunter S. Hinnen, Alison Day, Adam T. Woolley, Gregory P. Nordin and Troy Munro

Lab Chip, 2022, 22, 4393
DOI: 10.1039/D2LC00612J

A 3D-printed microfluidic platform for simulating the effects of CPAP on the nasal epithelium

Jesus Shrestha, Sean Thomas Ryan, Oliver Mills, Sareh Zhand, Sajad Razavi Bazaz, Philip Michael Hansbro, Maliheh Ghadiri and Majid Ebrahimi Warkiani

Biofabrication, 2021, 13, 035028
DOI: 10.1088/1758-5090/abe4c1

Engineering Distance Learning: The Promise and Challenges of Microfluidics

Megan Levis, Clare Hyland and Jeremiah Zartman

Biomed Eng Education, 2023, 3, 267
DOI: 10.1007/s43683-023-00117-3

Accessible Telemedicine Diagnostics with ELISA in a 3D Printed Pipette Tip

Mohamed Sharafeldin, Karteek Kadimisetty, Ketki R. Bhalerao, Itti Bist, Abby Jones, Tianqi Chen, Norman H. Lee and James F. Rusling

Anal. Chem., 2019, 91, 7394
DOI: 10.1021/acs.analchem.9b01284

All 3D printed energy harvester for autonomous and sustainable resource utilization

Myeong-Lok Seol, Rusnė Ivaškevičiūtė, Mark A. Ciappesoni, Furman V. Thompson, Dong-Il Moon, Sun Jin Kim, Sung Jin Kim, Jin-Woo Han and M. Meyyappan

Nano Energy, 2018, 52, 271
DOI: 10.1016/j.nanoen.2018.07.061

Transesterification of sunflower oil in microchannels with circular obstructions

Harrson S. Santana, João L. Silva, Deborah S. Tortola and Osvaldir P. Taranto

Chinese Journal of Chemical Engineering, 2018, 26, 852
DOI: 10.1016/j.cjche.2017.08.018

Flexible Materials for High-Resolution 3D Printing of Microfluidic Devices with Integrated Droplet Size Regulation

Niclas Weigel, Max J. Männel and Julian Thiele

ACS Appl. Mater. Interfaces, 2021, 13, 31086
DOI: 10.1021/acsami.1c05547

Fabrication of 3D Capillary Vessel Models with Circulatory Connection Ports

Mahmoud Gallab, Kyohei Tomita, Seiji Omata and Fumihito Arai

Micromachines, 2018, 9, 101
DOI: 10.3390/mi9030101

Highly Fluorinated Methacrylates for Optical 3D Printing of Microfluidic Devices

Frederik Kotz, Patrick Risch, Dorothea Helmer and Bastian Rapp

Micromachines, 2018, 9, 115
DOI: 10.3390/mi9030115

3D-printed microfluidics on thin poly(methyl methacrylate) substrates for genetic applications

Valentina Bertana, Cristina Potrich, Giorgio Scordo, Luciano Scaltrito, Sergio Ferrero, Andrea Lamberti, Francesco Perrucci, Candido Fabrizio Pirri, Cecilia Pederzolli, Matteo Cocuzza and Simone Luigi Marasso

Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 2018, 36
DOI: 10.1116/1.5003203

Direct Stereolithographic 3D Printing of Microfluidic Structures on Polymer Substrates for Printed Electronics

Sabine Zips, Ole Jonas Wenzel, Philipp Rinklin, Leroy Grob, Korkut Terkan, Nouran Yehia Adly, Lennart Weiß and Bernhard Wolfrum

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800455

Extrusion-based printing of sacrificial Carbopol ink for fabrication of microfluidic devices

Veli Ozbolat, Madhuri Dey, Bugra Ayan and Ibrahim T Ozbolat

Biofabrication, 2019, 11, 034101
DOI: 10.1088/1758-5090/ab10ae

Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices

Chuan Yi Foo, Hong Ngee Lim, Mohd Adzir Mahdi, Mohd Haniff Wahid and Nay Ming Huang

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-25861-3

Studying root–environment interactions in structured microdevices

Christian-Frederic Kaiser, Alessia Perilli, Guido Grossmann, Yasmine Meroz and Ivan Reyna-Llorens

Journal of Experimental Botany, 2023, 74, 3851
DOI: 10.1093/jxb/erad122

Designing with Printed Responsive Biomaterials: A Review

Laia Mogas-Soldevila and Katia Zolotovsky

3D Printing and Additive Manufacturing, 2025, 12, 155
DOI: 10.1089/3dp.2024.0004

Simulation study of biopolymer microspheres shape varying behavior

Roaa Mohammed Muneer, Nizar Jawad Hadi and Ali Al-Zubiedy

J. Phys.: Conf. Ser., 2021, 1973, 012101
DOI: 10.1088/1742-6596/1973/1/012101

Hydrothermal Deposition of PCN‐224 on 3D‐Printed Porous β‐Ca2SiO4 Scaffolds for Bone Regeneration

Jianhang Du, Weiye Liu, Zhanrong Kang, Bin Yu, Dejian Li, Huifeng Ding and Jianming Huang

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202101550

Engineering Materials and Devices for the Prevention, Diagnosis, and Treatment of COVID-19 and Infectious Diseases

Jennifer Soto, Chase Linsley, Yang Song, Binru Chen, Jun Fang, Josephine Neyyan, Raul Davila, Brandon Lee, Benjamin Wu and Song Li

Nanomaterials, 2023, 13, 2455
DOI: 10.3390/nano13172455

Recent Advances in Thermoplastic Microfluidic Bonding

Kiran Giri and Chia-Wen Tsao

Micromachines, 2022, 13, 486
DOI: 10.3390/mi13030486

Adding Biomolecular Recognition Capability to 3D Printed Objects: 4D Printing

C.A. Mandon, L.J. Blum and C.A. Marquette

Procedia Technology, 2017, 27, 1
DOI: 10.1016/j.protcy.2017.04.001

Microfluidic deformability cytometry: A review

Yao Chen, Kefan Guo, Lin Jiang, Shu Zhu, Zhonghua Ni and Nan Xiang

Talanta, 2023, 251, 123815
DOI: 10.1016/j.talanta.2022.123815

Polystyrene Topography Sticker Array for Cell-Based Assays

Heizel Rosado-Galindo and Maribella Domenech

Recent Prog Mater, 2020, 02, 1
DOI: 10.21926/rpm.2002013

3D printed selectable dilution mixer pumps

Hua Gong, Adam T. Woolley and Gregory P. Nordin

Biomicrofluidics, 2019, 13
DOI: 10.1063/1.5070068

Enhancing Biocompatibility: 3D-Printed Cyclic Olefin Copolymer Structures for Advanced Laboratory Applications

Simon Höving, Stefanie Dörr, Marc Akermann, Arthur Schiller, Kristina Lorenz, Daniel Schwendemann, Joachim Franzke and Sebastian Brandt

3D Printing and Additive Manufacturing, 2024
DOI: 10.1089/3dp.2023.0261

Emerging Frontiers in Formulation Development: Trends in Novel Drug-Delivery Systems for Enhanced Therapeutic Outcomes

Kiran Kumar Donthula, Shilpa Thakkalapally, G. Kotheshwar Rao and Anil Goud Kandhula

J. Drug Delivery Ther., 2026, 16, 1
DOI: 10.22270/jddt.v16i2.7550

Integration of glass micropipettes with a 3D printed aligner for microfluidic flow cytometer

Abdullah Bayram, Murat Serhatlioglu, Bulend Ortac, Serafettin Demic, Caglar Elbuken, Mustafa Sen and Mehmet Ertugrul Solmaz

Sensors and Actuators A: Physical, 2018, 269, 382
DOI: 10.1016/j.sna.2017.11.056

Fabrication of integrated microfluidic devices by direct ink writing (DIW) 3D printing

Terry Ching, Yingying Li, Rahul Karyappa, Akihiro Ohno, Yi-Chin Toh and Michinao Hashimoto

Sensors and Actuators B: Chemical, 2019, 297, 126609
DOI: 10.1016/j.snb.2019.05.086

Advances in triboelectric nanogenerator powered electrowetting-on-dielectric devices: Mechanism, structures, and applications

Jie Tan, Shulan Sun, Dongyue Jiang, Minyi Xu, Xiangyu Chen, Yongchen Song and Zhong Lin Wang

Materials Today, 2022, 58, 201
DOI: 10.1016/j.mattod.2022.07.009

3D-Printed Microfluidics Potential in Combating Future and Current Pandemics (COVID-19)

Heba A. Eassa, Nada A. Helal, Ahmed M. Amer, Aliaa Fouad, Asser F. Bedair, Reem Nagib, Ihab Mansoor, Motaz Hawash, Maha Abdul-Latif, Kamilia H.A. Mohammed, Mohamed A. Helal and Mohamed Ismail Nounou

RADDF, 2022, 16, 192
DOI: 10.2174/2667387816666220727101214

The Era of Digital Health: A Review of Portable and Wearable Affinity Biosensors

Jiaobing Tu, Rebeca M. Torrente‐Rodríguez, Minqiang Wang and Wei Gao

Adv Funct Materials, 2020, 30
DOI: 10.1002/adfm.201906713

Fast prototyping using 3D printed templates and flexible fluoropolymer microcapillary films offers enhanced micromixing in immobilised (bio)catalytic reactions

Kirandeep K. Gill, Zhengchun Liu and Nuno M. Reis

Chemical Engineering Journal, 2022, 429, 132266
DOI: 10.1016/j.cej.2021.132266

Speciation of trace iron in environmental water using 3D-printed minicolumns coupled with inductively coupled plasma mass spectrometry

Cheng-Kuan Su, Yi-Ting Chen and Yuh-Chang Sun

Microchemical Journal, 2019, 146, 835
DOI: 10.1016/j.microc.2019.02.015

Open-source, community-driven microfluidics with Metafluidics

David S Kong, Todd A Thorsen, Jonathan Babb, Scott T Wick, Jeremy J Gam, Ron Weiss and Peter A Carr

Nat Biotechnol, 2017, 35, 523
DOI: 10.1038/nbt.3873

Universal Micromachining Platform and Basic Technologies for the Manufacture and Marking of Microphysiological Systems

Katja Günther, Frank Sonntag, Elmar Moritzer, Andrè Hirsch, Udo Klotzbach and Andrés Lasagni

Micromachines, 2017, 8, 246
DOI: 10.3390/mi8080246

Surface Functionalization of Three-Dimensional Printed Scaffold for Biomedical Application

Yoo Seob Shin

Korean J Otorhinolaryngol-Head Neck Surg, 2025, 68, 53
DOI: 10.3342/kjorl-hns.2024.00325

3D Printed Microfluidics

Anna V. Nielsen, Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Annual Rev. Anal. Chem., 2020, 13, 45
DOI: 10.1146/annurev-anchem-091619-102649

Advancing Tissue Culture with Light-Driven 3D-Printed Microfluidic Devices

Xiangke Li, Meng Wang, Thomas P. Davis, Liwen Zhang and Ruirui Qiao

Biosensors, 2024, 14, 301
DOI: 10.3390/bios14060301

Design and characterization of a 3D printed miniature actuator using shape memory alloy wires

Morteza Teymoori and Özgür Kocatürk

Smart Mater. Struct., 2022, 31, 065025
DOI: 10.1088/1361-665X/ac6e53

3D microfluidics in PDMS: manufacturing with 3D molding

Tyler Richmond and Nathan Tompkins

Microfluid Nanofluid, 2021, 25
DOI: 10.1007/s10404-021-02478-z

Facile Photo and Thermal Two‐Stage Curing for High‐Performance 3D Printing of Poly(Dimethylsiloxane)

Zhongying Ji, Dong Jiang, Xiaoqin Zhang, Yuxiong Guo and Xiaolong Wang

Macromol. Rapid Commun., 2020, 41
DOI: 10.1002/marc.202000064

Recent Progress in Skin‐on‐a‐Chip Platforms

Mingyue Cui, Christian Wiraja, Mengjia Zheng, Gurvinder Singh, Ken‐Tye Yong and Chenjie Xu

Advanced Therapeutics, 2022, 5
DOI: 10.1002/adtp.202100138

3-D printed adjustable microelectrode arrays for electrochemical sensing and biosensing

Haipeng Yang, Md Taibur Rahman, Dan Du, Rahul Panat and Yuehe Lin

Sensors and Actuators B: Chemical, 2016, 230, 600
DOI: 10.1016/j.snb.2016.02.113

An efficient and low-cost compensation method for exposure uniformity based on digital oblique scanning lithography

Shengzhou Huang, Chengwei Jiang, Fanglin Xie, Jiale Sun, Mujun Li and Qingzhen Gao

Appl. Phys. Express, 2022, 15, 076506
DOI: 10.35848/1882-0786/ac799f

A Review of Three-Dimensional Printing Technology for Medical Applications

Sangwook Lee, Taehun Kim, Dayeong Hong, Junhyeok Ock, Jaeyoung Kwon, Eunseo Gwon, Jinhee Kwon, Joon Beom Seo, Eun Jin Chae, Dong Hyun Yang, Choung-Soo Kim, Yoon Soo Kyung, Beom Seok Ko, Sehoon Choi, Ho-Seok Sa and Namkug Kim

J Korean Soc Radiol, 2019, 80, 213
DOI: 10.3348/jksr.2019.80.2.213

Functional 3D Printing for Microfluidic Chips

Gregor Weisgrab, Aleksandr Ovsianikov and Pedro F. Costa

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201900275

Three-Dimensional Printing for Cancer Applications: Research Landscape and Technologies

Ruixiu Li, Yu-Huan Ting, Souha Youssef, Yunmei Song and Sanjay Garg

Pharmaceuticals, 2021, 14, 787
DOI: 10.3390/ph14080787

3D-printed plugs enhance cell usage efficiency for single-cell migration and neuron axon guidance assays

Jinxiong Cheng, Edwin C. Rock, Mishal Rao, Hsiao-Chun Chen, Yushu Ma, Kun-Che Chang and Yu-Chih Chen

Cell Reports Methods, 2025, 5, 101117
DOI: 10.1016/j.crmeth.2025.101117

Accessing microfluidics through feature-based design software for 3D printing

Peter G. Shankles, Larry J. Millet, Jayde A. Aufrecht, Scott T. Retterer and David T. Eddington

PLoS ONE, 2018, 13, e0192752
DOI: 10.1371/journal.pone.0192752

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Evgeniy G. Gordeev and Valentine P. Ananikov

Russ. Chem. Rev., 2020, 89, 1507
DOI: 10.1070/RCR4980

Microfluidic and Organ-on-a-Chip Approaches to Investigate Cellular and Microenvironmental Contributions to Cardiovascular Function and Pathology

Elizabeth L. Doherty, Wen Yih Aw, Anthony J. Hickey and William J. Polacheck

Front. Bioeng. Biotechnol., 2021, 9
DOI: 10.3389/fbioe.2021.624435

Characterization of 3D-Printed Moulds for Soft Lithography of Millifluidic Devices

Nurul Mohd Fuad, Megan Carve, Jan Kaslin and Donald Wlodkowic

Micromachines, 2018, 9, 116
DOI: 10.3390/mi9030116

Hydrogel microfabrication technology toward three dimensional tissue engineering

Fumiki Yanagawa, Shinji Sugiura and Toshiyuki Kanamori

Regenerative Therapy, 2016, 3, 45
DOI: 10.1016/j.reth.2016.02.007

Microfluidic devices for detection of RNA viruses

Arefeh Basiri, Arash Heidari, Melina Farshbaf Nadi, Mohammad Taha Pahlevan Fallahy, Sasan Salehi Nezamabadi, Mohammadreza Sedighi, Amene Saghazadeh and Nima Rezaei

Reviews in Medical Virology, 2021, 31, 1
DOI: 10.1002/rmv.2154

Fully 3D-printed solid-contact potentiometric sensor for sodium determination

Sarah Farahani, Kaylie A. McCracken, Hannah N. Medley and Jeffrey G. Bell

Biosensors and Bioelectronics, 2025, 289, 117866
DOI: 10.1016/j.bios.2025.117866

Opportunities for 3D printed millifluidic platforms incorporating on-line sample handling and separation

David J. Cocovi-Solberg, Paul J. Worsfold and Manuel Miró

TrAC Trends in Analytical Chemistry, 2018, 108, 13
DOI: 10.1016/j.trac.2018.08.007

Advanced Fabrication Techniques of Microengineered Physiological Systems

Joseph R. Puryear III, Jeong-Kee Yoon and YongTae Kim

Micromachines, 2020, 11, 730
DOI: 10.3390/mi11080730

3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices

Samuel Hales, Eric Tokita, Rajan Neupane, Udayan Ghosh, Brian Elder, Douglas Wirthlin and Yong Lin Kong

Nanotechnology, 2020, 31, 172001
DOI: 10.1088/1361-6528/ab5f29

Fully disposable microfluidic electrochemical device for detection of estrogen receptor alpha breast cancer biomarker

Carolina V. Uliana, Camila R. Peverari, André S. Afonso, Marcia R. Cominetti and Ronaldo C. Faria

Biosensors and Bioelectronics, 2018, 99, 156
DOI: 10.1016/j.bios.2017.07.043

Engineering brain-on-a-chip platforms

Bram Servais, Negar Mahmoudi, Vini Gautam, Wei Tong, Michael R. Ibbotson, David R. Nisbet and David Collins

Nat Rev Bioeng, 2024, 2, 691
DOI: 10.1038/s44222-024-00184-3

Assessment of the biocompatibility of three-dimensional-printed polymers using multispecies toxicity tests

Feng Zhu, Timo Friedrich, Dayanthi Nugegoda, Jan Kaslin and Donald Wlodkowic

Biomicrofluidics, 2015, 9
DOI: 10.1063/1.4939031

A Critical Review on the Sensing, Control, and Manipulation of Single Molecules on Optofluidic Devices

Mahmudur Rahman, Kazi Rafiqul Islam, Md. Rashedul Islam, Md. Jahirul Islam, Md. Rejvi Kaysir, Masuma Akter, Md. Arifur Rahman and S. M. Mahfuz Alam

Micromachines, 2022, 13, 968
DOI: 10.3390/mi13060968

3D printed microfluidics for cell biological applications

Liang Zhao and Xiayan Wang

TrAC Trends in Analytical Chemistry, 2023, 158, 116864
DOI: 10.1016/j.trac.2022.116864

Versatile ordered porous scaffold blooming from microfluidics

Ziming Wang, Junjie Chi, Zhiwei Hu and Changmin Shao

Applied Materials Today, 2024, 37, 102156
DOI: 10.1016/j.apmt.2024.102156

3D Printed Microfluidic Probes

Ayoola Brimmo, Pierre-Alexandre Goyette, Roaa Alnemari, Thomas Gervais and Mohammad A. Qasaimeh

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-29304-x

Advances in microfluidics for lipid nanoparticles and extracellular vesicles and applications in drug delivery systems

Masatoshi Maeki, Niko Kimura, Yusuke Sato, Hideyoshi Harashima and Manabu Tokeshi

Advanced Drug Delivery Reviews, 2018, 128, 84
DOI: 10.1016/j.addr.2018.03.008

Chemical analysis using miniaturized and Portable 3D printed systems: Where are we now?

Miryam Perrucci, Imran Ali, Fotouh R. Mansour, Halil I. Ulusoy, Songül Ulusoy, Abuzar Kabir, Ornella Abollino, Agnese Giacomino, Paolo Inaudi, Marcello Locatelli and Erika Maria Ricci

Journal of Chromatography Open, 2025, 8, 100241
DOI: 10.1016/j.jcoa.2025.100241

3D printing and milling a real-time PCR device for infectious disease diagnostics

Geoffrey Mulberry, Kevin A. White, Manjusha Vaidya, Kiminobu Sugaya, Brian N. Kim and Ruslan Kalendar

PLoS ONE, 2017, 12, e0179133
DOI: 10.1371/journal.pone.0179133

3D Printing of Micro‐Architected Al/CuO‐Based Nanothermite for Enhanced Combustion Performance

Yaofeng Mao, Lin Zhong, Xu Zhou, Dawei Zheng, Xingquan Zhang, Tao Duan, Fude Nie, Bing Gao and Dunju Wang

Adv Eng Mater, 2019, 21
DOI: 10.1002/adem.201900825

Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production

Chia-Wen Tsao

Micromachines, 2016, 7, 225
DOI: 10.3390/mi7120225

Application of Hybrid Manufacturing processes in microfabrication

Agathoklis A. Krimpenis and Georgios D. Noeas

Journal of Manufacturing Processes, 2022, 80, 328
DOI: 10.1016/j.jmapro.2022.06.009

Microfluidic high-throughput 3D cell culture

Jihoon Ko, Dohyun Park, Jungseub Lee, Sangmin Jung, Kyusuk Baek, Kyung E. Sung, Jeeyun Lee and Noo Li Jeon

Nat Rev Bioeng, 2024, 2, 453
DOI: 10.1038/s44222-024-00163-8

3D printed micro-mechanical device (MMD) for in situ tensile testing of micro/nanowires

Yuejiao Wang, Libo Gao, Sufeng Fan, Wenzhao Zhou, Xiang Li and Yang Lu

Extreme Mechanics Letters, 2019, 33, 100575
DOI: 10.1016/j.eml.2019.100575

3D Bioprinting in Microgravity: Opportunities, Challenges, and Possible Applications in Space

Angelique Van Ombergen, Franziska Chalupa‐Gantner, Parth Chansoria, Bianca Maria Colosimo, Marco Costantini, Marco Domingos, Alexandre Dufour, Carmelo De Maria, Jürgen Groll, Tomasz Jungst, Riccardo Levato, Jos Malda, Alessandro Margarita, Christophe Marquette, Aleksandr Ovsianikov, Emma Petiot, Sophia Read, Leonardo Surdo, Wojciech Swieszkowski, Giovanni Vozzi, Johannes Windisch, Marcy Zenobi‐Wong and Michael Gelinsky

Adv Healthcare Materials, 2023, 12
DOI: 10.1002/adhm.202300443

Design and fabrication of large area vat photopolymerization 3D printing system using a 32-inch quasi-collimated visible backlight module with local dimming control

Ding-Zheng Lin, Ping-Hung Yu, Zi-Jain Zhang, Yu-Cheng Chen, Shang-Chih Lin and Jeng-Ywan Jeng

Additive Manufacturing, 2023, 73, 103665
DOI: 10.1016/j.addma.2023.103665

Rapid Fabrication of Multilayer Microfluidic Devices Using the Liquid Crystal Display-Based Stereolithography 3D Printing System

Zongjie Wang, Nicholas Martin, Delator Hini, Barry Mills and Keekyoung Kim

3D Printing and Additive Manufacturing, 2017, 4, 156
DOI: 10.1089/3dp.2017.0028

Quantitative Determination of 3D-Printing and Surface-Treatment Conditions for Direct-Printed Microfluidic Devices

Hyun Namgung, Abdi Mirgissa Kaba, Hyeonkyu Oh, Hyunjin Jeon, Jeonghwan Yoon, Haseul Lee and Dohyun Kim

BioChip J, 2022, 16, 82
DOI: 10.1007/s13206-022-00048-1

MPS for Blood Brain Barrier

Kaoru Sato and Michiya Matsusaki

YAKUGAKU ZASSHI, 2023, 143, 45
DOI: 10.1248/yakushi.22-00161-2

Bioprinting of Organ-on-Chip Systems: A Literature Review from a Manufacturing Perspective

Ketan Thakare, Laura Jerpseth, Zhijian Pei, Alaa Elwany, Francis Quek and Hongmin Qin

JMMP, 2021, 5, 91
DOI: 10.3390/jmmp5030091

Direct 3D Printing of Catalytically Active Structures

J. Sebastián Manzano, Zachary B. Weinstein, Aaron D. Sadow and Igor I. Slowing

ACS Catal., 2017, 7, 7567
DOI: 10.1021/acscatal.7b02111

Optimal Data Acquisition Methods for Single-Pixel Imaging

Mikhail D. Aksenov and Denis V. Sych

J Russ Laser Res, 2018, 39, 492
DOI: 10.1007/s10946-018-9744-y

Photogrammetric measurements of 3D printed microfluidic devices

M.G. Guerra, C. Volpone, L.M. Galantucci and G. Percoco

Additive Manufacturing, 2018, 21, 53
DOI: 10.1016/j.addma.2018.02.013

Integrated lab-on-a-chip devices: Fabrication methodologies, transduction system for sensing purposes

Daphika S. Dkhar, Rohini Kumari, Shweta J. Malode, Nagaraj P. Shetti and Pranjal Chandra

Journal of Pharmaceutical and Biomedical Analysis, 2023, 223, 115120
DOI: 10.1016/j.jpba.2022.115120

3D-printed sustainable biocomposites via valorization of biomass: focus on challenges and their future perspectives

Ashish Soni, Sonu Kumar Gupta, Dhinakaran Veeman and Jitendra Kumar Katiyar

Environ Sci Pollut Res, 2025, 32, 28559
DOI: 10.1007/s11356-025-37109-5

Predicting the behavior of microfluidic circuits made from discrete elements

Krisna C. Bhargava, Bryant Thompson, Danish Iqbal and Noah Malmstadt

Sci Rep, 2015, 5
DOI: 10.1038/srep15609

3D-printed microfluidic devices

Reza Amin, Stephanie Knowlton, Alexander Hart, Bekir Yenilmez, Fariba Ghaderinezhad, Sara Katebifar, Michael Messina, Ali Khademhosseini and Savas Tasoglu

Biofabrication, 2016, 8, 022001
DOI: 10.1088/1758-5090/8/2/022001

Feasibility and Biocompatibility of 3D‐Printed Photopolymerized and Laser Sintered Polymers for Neuronal, Myogenic, and Hepatic Cell Types

Rowan P. Rimington, Andrew J. Capel, Darren J. Player, Richard J. Bibb, Steven D. R. Christie and Mark P. Lewis

Macromolecular Bioscience, 2018, 18
DOI: 10.1002/mabi.201800113

Fabrication of optical components using a consumer-grade lithographic printer

Gregory D. Berglund and Tomasz S. Tkaczyk

Opt. Express, 2019, 27, 30405
DOI: 10.1364/OE.27.030405

Microfluidics on the fly: Inexpensive rapid fabrication of thermally laminated microfluidic devices for live imaging and multimodal perturbations of multicellular systems

Megan Levis, Nilay Kumar, Emily Apakian, Cesar Moreno, Ulises Hernandez, Ana Olivares, Fernando Ontiveros and Jeremiah J. Zartman

Biomicrofluidics, 2019, 13
DOI: 10.1063/1.5086671

Automated 3D-Printed Microfluidic Array for Rapid Nanomaterial-Enhanced Detection of Multiple Proteins

Karteek Kadimisetty, Spundana Malla, Ketki S. Bhalerao, Islam M. Mosa, Snehasis Bhakta, Norman H. Lee and James F. Rusling

Anal. Chem., 2018, 90, 7569
DOI: 10.1021/acs.analchem.8b01198

Seamless fabrication technique for micro to millimeter structures by combining 3D printing and photolithography

Takahiro Tamura and Takaaki Suzuki

Jpn. J. Appl. Phys., 2019, 58, SDDL10
DOI: 10.7567/1347-4065/ab09d0

Three-Dimensional Printing Enabled Droplet Microfluidic Device for Real-Time Monitoring of Single-Cell Viability and Blebbing Activity

Meiai Lin, Ting Liu, Yeqian Liu, Zequan Lin, Jiale Chen, Jing Song, Yiya Qiu and Benqing Zhou

Micromachines, 2023, 14, 1521
DOI: 10.3390/mi14081521

An adaptive neural-fuzzy approach for microfluidic droplet size prediction

Ali Lashkaripour, Masoud Goharimanesh, Ali Abouei Mehrizi and Douglas Densmore

Microelectronics Journal, 2018, 78, 73
DOI: 10.1016/j.mejo.2018.05.018

All-printed triboelectric nanogenerator

Myeong-Lok Seol, Jin-Woo Han, Dong-Il Moon, Kyung Jean Yoon, Cheol Seong Hwang and M. Meyyappan

Nano Energy, 2018, 44, 82
DOI: 10.1016/j.nanoen.2017.11.067

3D Printed Ion-Selective Membranes and Their Translation into Point-of-Care Sensors

Dalton L. Glasco, Nguyen H. B. Ho, Art Matthew Mamaril and Jeffrey G. Bell

Anal. Chem., 2021, 93, 15826
DOI: 10.1021/acs.analchem.1c03762

Development of Aptamer-Based Point-of-Care Diagnostic Devices for Malaria Using Three-Dimensional Printing Rapid Prototyping

Roderick M. Dirkzwager, Shaolin Liang and Julian A. Tanner

ACS Sens., 2016, 1, 420
DOI: 10.1021/acssensors.5b00175

Fabrication of a simple 3D-printed microfluidic device with embedded electrochemiluminescence detection for rapid determination of sibutramine in dietary supplements

Nisachon Praoboon, Tanin Tangkuaram, Viruntachar Kruefu, Pusit Pookmanee, Sirirat Phaisansuthichol, Surasak Kuimalee, Nattapol Laorodphan and Sakchai Satienperakul

Microchim Acta, 2023, 190
DOI: 10.1007/s00604-023-05725-y

Manufacturing of Microfluidic Sensors Utilizing 3D Printing Technologies: A Production System

Danial Khorsandi, Mehrab Nodehi, Tayyab Waqar, Majid Shabani, Behnam Kamare, Ehsan Nazarzadeh Zare, Sezgin Ersoy, Mohsen Annabestani, Mehmet Fatih Çelebi, Abdullah Kafadenk and Jianbo Yin

Journal of Nanomaterials, 2021, 2021, 1
DOI: 10.1155/2021/5537074

Microfluidic multipoles theory and applications

Pierre-Alexandre Goyette, Étienne Boulais, Frédéric Normandeau, Gabriel Laberge, David Juncker and Thomas Gervais

Nat Commun, 2019, 10
DOI: 10.1038/s41467-019-09740-7

Development of 3D printed microchips with encapsulated channels as miniaturized separation devices for bioanalysis

Christopher T. Desire, R. Dario Arrua, Billy Michalatos, Jing Zhang, Xanthe L. Venn, Michael Breadmore, Zlatko Kopecki, Neil McMillan, Robert Fitridge, Emily F. Hilder and Allison J. Cowin

Analytica Chimica Acta, 2026, 1384, 344971
DOI: 10.1016/j.aca.2025.344971

Microfluidic Chips for Life Sciences—A Comparison of Low Entry Manufacturing Technologies

Maximilian Grösche, Ahmed E. Zoheir, Johannes Stegmaier, Ralf Mikut, Dario Mager, Jan G. Korvink, Kersten S. Rabe and Christof M. Niemeyer

Small, 2019, 15
DOI: 10.1002/smll.201901956

3D Printing Technology in the Pharmaceutical and Biomedical Applications: A Critical Review

Nahid Tyagi, Vipul Bhardwaj, Deepanshu Sharma, Renu Tomar, Venu Chaudhary, Manika Khanuja, Manoj Kumar Singh and Gaurav Sharma

Biomedical Materials & Devices, 2024, 2, 178
DOI: 10.1007/s44174-023-00105-9

Academic Insights and Perspectives in 3D Printing: A Bibliometric Review

Wenyu Bai, Hui Fang, Yawen Wang, Qiang Zeng, Guangyao Hu, Guanjun Bao and Yuehua Wan

Applied Sciences, 2021, 11, 8298
DOI: 10.3390/app11188298

Cost-effective 3D H-filter fabricated by xurographic method

A. Bahari, A. Mirzaei and M. Taghipoor

Microfluid Nanofluid, 2022, 26
DOI: 10.1007/s10404-022-02573-9

Recent advances in 3D printing with protein-based inks

Xuan Mu, Francesca Agostinacchio, Ning Xiang, Ying Pei, Yousef Khan, Chengchen Guo, Peggy Cebe, Antonella Motta and David L. Kaplan

Progress in Polymer Science, 2021, 115, 101375
DOI: 10.1016/j.progpolymsci.2021.101375

Patient‐Specific Organoid and Organ‐on‐a‐Chip: 3D Cell‐Culture Meets 3D Printing and Numerical Simulation

Fuyin Zheng, Yuminghao Xiao, Hui Liu, Yubo Fan and Ming Dao

Advanced Biology, 2021, 5
DOI: 10.1002/adbi.202000024

Interplay between materials and microfluidics

Xu Hou, Yu Shrike Zhang, Grissel Trujillo-de Santiago, Mario Moisés Alvarez, João Ribas, Steven J. Jonas, Paul S. Weiss, Anne M. Andrews, Joanna Aizenberg and Ali Khademhosseini

Nat Rev Mater, 2017, 2
DOI: 10.1038/natrevmats.2017.16

Biodiesel Production by Heterogeneous Catalysis and Eco‐friendly Routes

Rosilene Andrea Welter, Harrson Silva Santana, Lucimara Gaziola de la Torre, Mark C. Barnes, Osvaldir Pereira Taranto and Michael Oelgemöller

ChemBioEng Reviews, 2023, 10, 86
DOI: 10.1002/cben.202200062

Recent advancements of optical, electrochemical, and photoelectrochemical transducer-based microfluidic devices for pesticide and mycotoxins in food and water

Md Mehedi Hassan, Xu Yi, Muhammad Zareef, Huanhuan Li and Quansheng Chen

Trends in Food Science & Technology, 2023, 142, 104230
DOI: 10.1016/j.tifs.2023.104230

Grown, Printed, and Biologically Augmented: An Additively Manufactured Microfluidic Wearable, Functionally Templated for Synthetic Microbes

Christoph Bader, William G. Patrick, Dominik Kolb, Stephanie G. Hays, Steven Keating, Sunanda Sharma, Daniel Dikovsky, Boris Belocon, James C. Weaver, Pamela A. Silver and Neri Oxman

3D Printing and Additive Manufacturing, 2016, 3, 79
DOI: 10.1089/3dp.2016.0027

Advances in Wearable Chemosensors

Panagiota Koralli and Dionysios E. Mouzakis

Chemosensors, 2021, 9, 99
DOI: 10.3390/chemosensors9050099

3D printing of microfluidic devices with embedded sensing electrodes for generating and measuring the size of microdroplets based on contactless conductivity detection

Lucas C. Duarte, Cyro L.S. Chagas, Luiz E.B. Ribeiro and Wendell K.T. Coltro

Sensors and Actuators B: Chemical, 2017, 251, 427
DOI: 10.1016/j.snb.2017.05.011

Enzyme-Immobilized 3D-Printed Reactors for Online Monitoring of Rat Brain Extracellular Glucose and Lactate

Cheng-Kuan Su, Shuo-Chih Yen, Tzu-Wen Li and Yuh-Chang Sun

Anal. Chem., 2016, 88, 6265
DOI: 10.1021/acs.analchem.6b00272

New Equipment and Devices for Therapeutic Purpose

Kwanwoo Shin

Int Neurourol J, 2017, 21, S2
DOI: 10.5213/inj.1720edi004

Isothermal titration calorimetry in a 3D-printed microdevice

Yuan Jia, Chao Su, Maogang He, Kun Liu, Hao Sun and Qiao Lin

Biomed Microdevices, 2019, 21
DOI: 10.1007/s10544-019-0444-3

Microfluidic Monodispersed Microbubble Generation for Production of Cavitation Nuclei

Renjie Ning, Blake Acree, Mengren Wu and Yuan Gao

Micromachines, 2024, 15, 1531
DOI: 10.3390/mi15121531

Ultrahigh-Throughput Enzyme Engineering and Discovery in In Vitro Compartments

Maximilian Gantz, Stefanie Neun, Elliot J. Medcalf, Liisa D. van Vliet and Florian Hollfelder

Chem. Rev., 2023, 123, 5571
DOI: 10.1021/acs.chemrev.2c00910

Rapid assembly of multilayer microfluidic structures via 3D-printed transfer molding and bonding

Casey C. Glick, Mitchell T. Srimongkol, Aaron J. Schwartz, William S. Zhuang, Joseph C. Lin, Roseanne H. Warren, Dennis R. Tekell, Panitan A. Satamalee and Liwei Lin

Microsyst Nanoeng, 2016, 2
DOI: 10.1038/micronano.2016.63

MICROBIOREACTORS AS ENGINEERING TOOLS FOR BIOPROCESS DEVELOPMENT

R. C. Prado and E. R. Borges

Braz. J. Chem. Eng., 2018, 35, 1163
DOI: 10.1590/0104-6632.20180354s20170433

3D‐Printed Microfluidics

Anthony K. Au, Wilson Huynh, Lisa F. Horowitz and Albert Folch

Angew Chem Int Ed, 2016, 55, 3862
DOI: 10.1002/anie.201504382

Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges

Wei Long Ng, Jia Min Lee, Miaomiao Zhou, Yi-Wen Chen, Kai-Xing Alvin Lee, Wai Yee Yeong and Yu-Fang Shen

Biofabrication, 2020, 12, 022001
DOI: 10.1088/1758-5090/ab6034

Optimizing Process Parameters in Commercial Micro‐Stereolithography for Forming Emulsions and Polymer Microparticles in Nonplanar Microfluidic Devices

Max J. Männel, Lukas Selzer, Ricardo Bernhardt and Julian Thiele

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800408

Additive manufacturing and three-dimensional printing in obstetrics and gynecology: a comprehensive review

Mert Yasli, Sajjad Rahmani Dabbagh, Savas Tasoglu and Serdar Aydin

Arch Gynecol Obstet, 2023, 308, 1679
DOI: 10.1007/s00404-023-06912-1

Blood brain barrier-on-a-chip to model neurological diseases

S. Reshma, K.B. Megha, S. Amir, S. Rukhiya and P.V. Mohanan

Journal of Drug Delivery Science and Technology, 2023, 80, 104174
DOI: 10.1016/j.jddst.2023.104174

3D Printed Paper-Based Microfluidic Analytical Devices

Yong He, Qing Gao, Wen-Bin Wu, Jing Nie and Jian-Zhong Fu

Micromachines, 2016, 7, 108
DOI: 10.3390/mi7070108

Biomimetics of the pulmonary environment in vitro: A microfluidics perspective

Janna Tenenbaum-Katan, Arbel Artzy-Schnirman, Rami Fishler, Netanel Korin and Josué Sznitman

Biomicrofluidics, 2018, 12
DOI: 10.1063/1.5023034

Developing Microfluidic Sensing Devices Using 3D Printing

James F. Rusling

ACS Sens., 2018, 3, 522
DOI: 10.1021/acssensors.8b00079

The 3D Printing of Freestanding PLLA Thin Layers and Improving First Layer Consistency through the Introduction of Sacrificial PVA

David M. Roper, Kyung-Ah Kwon, Serena M. Best and Ruth E. Cameron

Applied Sciences, 2021, 11, 6320
DOI: 10.3390/app11146320

A study on the dynamics of bacterial growth using biocompatible 3D-printed microfluidic device

Amlan Ashish, Poulomi Biswas, Brateen Datta, Chiranjeevi Kanike, Arnab Atta and Gorachand Dutta

Chemical Engineering Journal, 2024, 493, 152687
DOI: 10.1016/j.cej.2024.152687

Additive Biotech—Chances, challenges, and recent applications of additive manufacturing technologies in biotechnology

Felix Krujatz, Anja Lode, Julia Seidel, Thomas Bley, Michael Gelinsky and Juliane Steingroewer

New Biotechnology, 2017, 39, 222
DOI: 10.1016/j.nbt.2017.09.001

The Tumor-on-Chip: Recent Advances in the Development of Microfluidic Systems to Recapitulate the Physiology of Solid Tumors

Grissel Trujillo-de Santiago, Brenda Giselle Flores-Garza, Jorge Alfonso Tavares-Negrete, Itzel Montserrat Lara-Mayorga, Ivonne González-Gamboa, Yu Shrike Zhang, Augusto Rojas-Martínez, Rocío Ortiz-López and Mario Moisés Álvarez

Materials, 2019, 12, 2945
DOI: 10.3390/ma12182945

3D-Printed Hydrodynamic Focusing Lab-on-a-Chip Device for Impedance Flow Particle Analysis

Dayananda Desagani, Shani Kleiman, Teddy Zagardan and Hadar Ben-Yoav

Chemosensors, 2023, 11, 283
DOI: 10.3390/chemosensors11050283

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

Yong He, Yan Wu, Jian‐zhong Fu, Qing Gao and Jing‐jiang Qiu

Electroanalysis, 2016, 28, 1658
DOI: 10.1002/elan.201600043

PolyJet 3D-Printed Enclosed Microfluidic Channels without Photocurable Supports

Andre D. Castiaux, Cody W. Pinger, Elizabeth A. Hayter, Marcus E. Bunn, R. Scott Martin and Dana M. Spence

Anal. Chem., 2019, 91, 6910
DOI: 10.1021/acs.analchem.9b01302

3D printing – a key technology for tailored biomedical cell culture lab ware

Florian Schmieder, Joachim Ströbel, Mechthild Rösler, Stefan Grünzner, Bernd Hohenstein, Udo Klotzbach and Frank Sonntag

Current Directions in Biomedical Engineering, 2016, 2, 105
DOI: 10.1515/cdbme-2016-0026

Combined masked LCD-printing and microfabrication for bioimpedance-chips

Julia Linert, Philipp Taus, Sonia Prado-López, Markus Pribyl, Samuele M. Dozio, Michael J. Haslinger, Elena Guillen, Michael Muehlberger and Heinz D. Wanzenboeck

Micro and Nano Engineering, 2022, 16, 100159
DOI: 10.1016/j.mne.2022.100159

Mask-Free Laser Lithography for Rapid and Low-Cost Microfluidic Device Fabrication

Tatiana Trantidou, Mark S. Friddin, Kin B. Gan, Luyao Han, Guido Bolognesi, Nicholas J. Brooks and Oscar Ces

Anal. Chem., 2018, 90, 13915
DOI: 10.1021/acs.analchem.8b03169

Fabrication of 3D-printed molds for polydimethylsiloxane-based microfluidic devices using a liquid crystal display-based vat photopolymerization process: printing quality, drug response and 3D invasion cell culture assays

Matthew D. Poskus, Tuo Wang, Yuxuan Deng, Sydney Borcherding, Jake Atkinson and Ioannis K. Zervantonakis

Microsyst Nanoeng, 2023, 9
DOI: 10.1038/s41378-023-00607-y

3-D printed customizable vitrification devices for preservation of genetic resources of aquatic species

Connor J. Tiersch, Yue Liu, Terrence R. Tiersch and William T. Monroe

Aquacultural Engineering, 2020, 90, 102097
DOI: 10.1016/j.aquaeng.2020.102097

Research on Simulation Optimization of MEMS Microfluidic Structures at the Microscale

Changhu Wang and Weiyun Meng

Micromachines, 2025, 16, 695
DOI: 10.3390/mi16060695

Ultrafast laser ablation of soda-lime glass for fabricating microfluidic pillar array channels

Tien-Li Chang, Zhao-Chi Chen, Ya-Wei Lee, Yan-Hom Li and Chien-Ping Wang

Microelectronic Engineering, 2016, 158, 95
DOI: 10.1016/j.mee.2016.03.034

Integrated 3D printed heaters for microfluidic applications: Ammonium analysis within environmental water

Elisenda Fornells, Eoin Murray, Sidra Waheed, Aoife Morrin, Dermot Diamond, Brett Paull and Michael Breadmore

Analytica Chimica Acta, 2020, 1098, 94
DOI: 10.1016/j.aca.2019.11.025

Solid Circulating Velocity Measurement in a Liquid–Solid Micro-Circulating Fluidised Bed

Orlando L. do Nascimento, David A. Reay and Vladimir Zivkovic

Processes, 2020, 8, 1159
DOI: 10.3390/pr8091159

Generating direct diamond shaping tool paths using special-purpose computer-aided-machining post-processor

Darren Wei Wen Low, Nicholas Yew Jin Tan, Dennis Neo Wee Keong and A. Senthil Kumar

International Journal of Computer Integrated Manufacturing, 2022, 35, 1010
DOI: 10.1080/0951192X.2022.2027522

3D printed microfluidics and microelectronics

Ryan D. Sochol, Eric Sweet, Casey C. Glick, Sung-Yueh Wu, Chen Yang, Michael Restaino and Liwei Lin

Microelectronic Engineering, 2018, 189, 52
DOI: 10.1016/j.mee.2017.12.010

Instructive Hydrogels for Primary Tumor Cell Culture: Current Status and Outlook

Yiyang Jia, Zhentong Wei, Songling Zhang, Bai Yang and Yunfeng Li

Adv Healthcare Materials, 2022, 11
DOI: 10.1002/adhm.202102479

A rapid, maskless 3D prototyping for fabrication of capillary circuits: Toward urinary protein detection

Sheng Yan, Yuanqing Zhu, Shi‐Yang Tang, Yuxing Li, Qianbin Zhao, Dan Yuan, Guolin Yun, Jun Zhang, Shiwu Zhang and Weihua Li

Electrophoresis, 2018, 39, 957
DOI: 10.1002/elps.201700449

Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives

Balasubramanian Nagarajan, Zhiheng Hu, Xu Song, Wei Zhai and Jun Wei

Engineering, 2019, 5, 702
DOI: 10.1016/j.eng.2019.07.002

Design and Fabrication of 3D‐Printed Lab‐On‐A‐Chip Devices for Fiber‐Based Optical Chromatography and Sorting

Ole Milark, Marc Buttkewitz, Emil Agócs, Beate Legutko, Benjamin Bergmann, Janina Bahnemann, Alexander Heisterkamp and Maria Leilani Torres‐Mapa

Advanced Photonics Research, 2024, 5
DOI: 10.1002/adpr.202400011

A review of Microfluidic blood separation techniques

Hengky Tanjaya, Raphael Albert Darius, Debora, Nico Hananda, Azure Kamul, Stefanus Hanifa Prajitna, Christian Harito, Rudy Susanto, T.N. Mursitama, Noerlina, D.N. Utama and S.A. Abrori

E3S Web Conf., 2023, 426, 01063
DOI: 10.1051/e3sconf/202342601063

Recent developments in scale-up of microfluidic emulsion generation via parallelization

Heon-Ho Jeong, David Issadore and Daeyeon Lee

Korean J. Chem. Eng., 2016, 33, 1757
DOI: 10.1007/s11814-016-0041-6

3D-Printed High-Density Droplet Array Chip for Miniaturized Protein Crystallization Screening under Vapor Diffusion Mode

Yi-Ran Liang, Li-Na Zhu, Jie Gao, Hong-Xia Zhao, Ying Zhu, Sheng Ye and Qun Fang

ACS Appl. Mater. Interfaces, 2017, 9, 11837
DOI: 10.1021/acsami.6b15933

Sophisticated acoustofluidic patterns generated in quasi-Sierpiński-carpet shaped chambers with heterogeneous radiation surface distributions

Qiang Tang, Yongwei Yang, Pengzhan Liu, Tongyue Wang and Xu Wang

Phys. Scr., 2022, 97, 085209
DOI: 10.1088/1402-4896/ac7c98

Hydrogel-Based Strategies for Liver Tissue Engineering

Yu Zhang, Luofei Li, Liang Dong, Yuanqi Cheng, Xiaoyu Huang, Bin Xue, Chunping Jiang, Yi Cao and Jiapeng Yang

Chem Bio Eng., 2024, 1, 887
DOI: 10.1021/cbe.4c00079

Enhancing Surface Fault Detection Using Machine Learning for 3D Printed Products

Vaibhav Kadam, Satish Kumar, Arunkumar Bongale, Seema Wazarkar, Pooja Kamat and Shruti Patil

ASI, 2021, 4, 34
DOI: 10.3390/asi4020034

Microfluidic chip fabrication and performance analysis of 3D printed material for use in microfluidic nucleic acid amplification applications

Charalampos Tzivelekis, Matthew P Selby, Albert Batet, Hojjat Madadi and Kenny Dalgarno

J. Micromech. Microeng., 2021, 31, 035005
DOI: 10.1088/1361-6439/abd9a9

Developments in Transduction, Connectivity and AI/Machine Learning for Point-of-Care Testing

Shane O’Sullivan, Zulfiqur Ali, Xiaoyi Jiang, Reza Abdolvand, M Selim Ünlü, Hugo Plácido da Silva, Justin T. Baca, Brian Kim, Simon Scott, Mohammed Imran Sajid, Sina Moradian, Hakhamanesh Mansoorzare and Andreas Holzinger

Sensors, 2019, 19, 1917
DOI: 10.3390/s19081917

A novel fabrication method of carbon electrodes using 3D printing and chemical modification process

Pan Tian, Chaoyang Chen, Jie Hu, Jin Qi, Qianghua Wang, Jimmy Ching-Ming Chen, John Cavanaugh, Yinghong Peng and Mark Ming-Cheng Cheng

Biomed Microdevices, 2018, 20
DOI: 10.1007/s10544-017-0247-3

Research Progress of 3D Printing Microfluidic Chip

Siyuan Zhang and Lin Fu

J. Phys.: Conf. Ser., 2020, 1549, 052055
DOI: 10.1088/1742-6596/1549/5/052055

Interfacing Pathogen Detection with Smartphones for Point-of-Care Applications

Xiong Ding, Michael G. Mauk, Kun Yin, Karteek Kadimisetty and Changchun Liu

Anal. Chem., 2019, 91, 655
DOI: 10.1021/acs.analchem.8b04973

A review on inertial microfluidic fabrication methods

Zohreh Akbari, Mohammad Amin Raoufi, Sheyda Mirjalali and Behrouz Aghajanloo

Biomicrofluidics, 2023, 17
DOI: 10.1063/5.0163970

Current Advances on 3D‐Bioprinted Liver Tissue Models

Liang Ma, Yutong Wu, Yuting Li, Abdellah Aazmi, Hongzhao Zhou, Bin Zhang and Huayong Yang

Adv Healthcare Materials, 2020, 9
DOI: 10.1002/adhm.202001517

Advances in Microtechnology for Improved Cytotoxicity Assessment

Maite Garcia-Hernando, Fernando Benito-Lopez and Lourdes Basabe-Desmonts

Front. Mater., 2020, 7
DOI: 10.3389/fmats.2020.582030

From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication

Jingjing Xu, Michael Harasek and Margit Gföhler

Polymers, 2025, 17, 455
DOI: 10.3390/polym17040455

3D printed water-soluble scaffolds for rapid production of PDMS micro-fluidic flow chambers

Tobias Dahlberg, Tim Stangner, Hanqing Zhang, Krister Wiklund, Petter Lundberg, Ludvig Edman and Magnus Andersson

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-21638-w

Development of glass-based microfluidic devices: A review on its fabrication and biologic applications

Shambhulinga Aralekallu, Rajamouli Boddula and Vijay Singh

Materials & Design, 2023, 225, 111517
DOI: 10.1016/j.matdes.2022.111517

Miniaturized 3-D Solenoid-Type Micro-Heaters in Coordination With 3-D Microfluidics

Hao Bian, Chao Shan, Feng Chen, Qing Yang, Yanyang Li and Qichao Li

J. Microelectromech. Syst., 2017, 26, 588
DOI: 10.1109/JMEMS.2017.2676003

Commercialization of 3D-Printed Microfluidic Devices

Reza Amin, Ashwini Joshi and Savas Tasoglu

J. 3D Print. Med., 2017, 1, 85
DOI: 10.2217/3dp-2016-0010

High-resolution 3D-printed insulator-based dielectrophoresis devices for biomolecular manipulation

Mukul Sonker, Mohammad Towshif Rabbani, Samira Mahmud, Jorvani Cruz Villarreal, Domin Koh, Raimund Fromme and Alexandra Ros

Anal Bioanal Chem, 2026
DOI: 10.1007/s00216-026-06331-6

3D Printing of Cell Culture Devices: Assessment and Prevention of the Cytotoxicity of Photopolymers for Stereolithography

Sebastian Kreß, Roland Schaller-Ammann, Jürgen Feiel, Joachim Priedl, Cornelia Kasper and Dominik Egger

Materials, 2020, 13, 3011
DOI: 10.3390/ma13133011

A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite—Development and Characterization

Bilal Khatri, Karl Lappe, Dorit Noetzel, Kilian Pursche and Thomas Hanemann

Materials, 2018, 11, 189
DOI: 10.3390/ma11020189

Modular and Self-Contained Microfluidic Analytical Platforms Enabled by Magnetorheological Elastomer Microactuators

Yuxin Zhang, Tim Cole, Guolin Yun, Yuxing Li, Qianbin Zhao, Hongda Lu, Jiahao Zheng, Weihua Li and Shi-Yang Tang

Micromachines, 2021, 12, 604
DOI: 10.3390/mi12060604

An Investigation of the Properties of 3D Printing Materials According to Additive Manufacturing Conditions Using Ultrasonic Wave

Junpil Park, Sunho Choi, Seoung ho Baek, Sang hu Park, Yu-Hsi Huang and Jaesun Lee

Int. J. Precis. Eng. Manuf., 2023, 24, 1041
DOI: 10.1007/s12541-023-00801-y

Microphysiological Human Brain and Neural Systems-on-a-Chip: Potential Alternatives to Small Animal Models and Emerging Platforms for Drug Discovery and Personalized Medicine

Alexander P. Haring, Harald Sontheimer and Blake N. Johnson

Stem Cell Rev and Rep, 2017, 13, 381
DOI: 10.1007/s12015-017-9738-0

Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review

Daniela Pranzo, Piero Larizza, Daniel Filippini and Gianluca Percoco

Micromachines, 2018, 9, 374
DOI: 10.3390/mi9080374

Fabrication of 3D matrix microenvironment by two-photon lithography for mechanobiology study

Zuyan Lu, Wenbo Jiang, Weixin Zhao, Jie Zhao and Kerong Dai

Mechanobiology in Medicine, 2023, 1, 100010
DOI: 10.1016/j.mbm.2023.100010

Interconnectable 3D-printed sample processing modules for portable mycotoxin screening of intact wheat

Anouk J. Bosman, Stephan Freitag, Georgina M.S. Ross, Michael Sulyok, Rudolf Krska, Francesco Simone Ruggeri and Gert IJ. Salentijn

Analytica Chimica Acta, 2024, 1285, 342000
DOI: 10.1016/j.aca.2023.342000

Design and development of an efficient fluid mixing for 3D printed lab-on-a-chip

Anurag Agarwal, Asif Salahuddin, Hualong Wang and Mohammed Jalal Ahamed

Microsyst Technol, 2020, 26, 2465
DOI: 10.1007/s00542-020-04787-9

Biosensing on the Centrifugal Microfluidic Lab-on-a-Disc Platform

Celina M. Miyazaki, Eadaoin Carthy and David J. Kinahan

Processes, 2020, 8, 1360
DOI: 10.3390/pr8111360

Emerging albumin hydrogels as personalized biomaterials

Fanhui Kong, Nabila Mehwish and Bae Hoon Lee

Acta Biomaterialia, 2023, 157, 67
DOI: 10.1016/j.actbio.2022.11.058

Custom fabrication of biomass containment devices using 3-D printing enables bacterial growth analyses with complex insoluble substrates

Cassandra E. Nelson, Nina R. Beri and Jeffrey G. Gardner

Journal of Microbiological Methods, 2016, 130, 136
DOI: 10.1016/j.mimet.2016.09.013

Simple, low-cost fabrication of acrylic based droplet microfluidics and its use to generate DNA-coated particles

Md. Mamunul Islam, Amanda Loewen and Peter B. Allen

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-27037-5

3D-MiXD: 3D-printed X-ray-compatible microfluidic devices for rapid, low-consumption serial synchrotron crystallography data collection in flow

Diana C. F. Monteiro, David von Stetten, Claudia Stohrer, Marta Sans, Arwen R. Pearson, Gianluca Santoni, Peter van der Linden and Martin Trebbin

IUCrJ, 2020, 7, 207
DOI: 10.1107/S2052252519016865

Engineering of Removing Sacrificial Materials in 3D-Printed Microfluidics

Pengju Yin, Bo Hu, Langlang Yi, Chun Xiao, Xu Cao, Lei Zhao and Hongyan Shi

Micromachines, 2018, 9, 327
DOI: 10.3390/mi9070327

Low-cost 3D printed inertial flow microfluidic devices for cellular isolation in liquid biopsies

Jessica Nathalia Sierra Agudelo, Francesc Subirada, Melanie Hendriks, Romen Rodriguez Trujillo and Josep Samitier

Front. Lab. Chip. Technol., 2023, 2
DOI: 10.3389/frlct.2023.1175668

Characterization and Electrochemical Analysis of Microelectrodes and the Interface with a Fabricated 3D-Printed Microfluidic Chip in an Upper-Division Analytical Course

Chelsea DeLeon, Tara Tabibi and Asmira Alagic

J. Chem. Educ., 2020, 97, 4453
DOI: 10.1021/acs.jchemed.0c00427

Organs-on-a-Chip Module: A Review from the Development and Applications Perspective

Juan Eduardo Sosa-Hernández, Angel M. Villalba-Rodríguez, Kenya D. Romero-Castillo, Mauricio A. Aguilar-Aguila-Isaías, Isaac E. García-Reyes, Arturo Hernández-Antonio, Ishtiaq Ahmed, Ashutosh Sharma, Roberto Parra-Saldívar and Hafiz M. N. Iqbal

Micromachines, 2018, 9, 536
DOI: 10.3390/mi9100536

3D printing in upcycling plastic and biomass waste to sustainable polymer blends and composites: A review

Malik Hassan, Amar K. Mohanty and Manjusri Misra

Materials & Design, 2024, 237, 112558
DOI: 10.1016/j.matdes.2023.112558

Structure of tracheae and the functional implications for collapse in the American cockroach

Matthew R Webster, John J Socha, Luciano Teresi, Paola Nardinocchi and Raffaella De Vita

Bioinspir. Biomim., 2015, 10, 066011
DOI: 10.1088/1748-3190/10/6/066011

Microfluidic Gradient Culture Arrays for Cell Pro-oxidation Analysis Using Bipolar Electrochemiluminescence

Yu Liu, Qiu-Yue Cheng, Hang Gao, Hong-Yuan Chen and Jing-Juan Xu

Anal. Chem., 2023, 95, 8376
DOI: 10.1021/acs.analchem.3c01123

3D-Printed Paper Spray Ionization Cartridge with Integrated Desolvation Feature and Ion Optics

G. IJ. Salentijn, R. D. Oleschuk and E. Verpoorte

Anal. Chem., 2017, 89, 11419
DOI: 10.1021/acs.analchem.7b02490

Additive Manufacturing of Stretchable Multi-Walled Carbon Nanotubes/Thermoplastic Polyurethanes Conducting Polymers for Strain Sensing

Fuxi Liu, Dezhi Bai, Deqiao Xie, Fei Lv, Lida Shen, Zongjun Tian and Jianfeng Zhao

3D Printing and Additive Manufacturing, 2024, 11, 698
DOI: 10.1089/3dp.2022.0223

Revolutionizing the female reproductive system research using microfluidic chip platform

Jinfeng Yan, Tong Wu, Jinjin Zhang, Yueyue Gao, Jia-Min Wu and Shixuan Wang

J Nanobiotechnol, 2023, 21
DOI: 10.1186/s12951-023-02258-7

3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications

Alireza Ahmadian Yazdi, Adam Popma, William Wong, Tammy Nguyen, Yayue Pan and Jie Xu

Microfluid Nanofluid, 2016, 20
DOI: 10.1007/s10404-016-1715-4

Chemistry from 3D printed objects

Matthew R. Hartings and Zeeshan Ahmed

Nat Rev Chem, 2019, 3, 305
DOI: 10.1038/s41570-019-0097-z

A 3D printed size-tunable flow-focusing droplet microdevice to produce cell-laden hydrogel microspheres

Huynh Quoc Nguyen and Tae Seok Seo

Analytica Chimica Acta, 2022, 1192, 339344
DOI: 10.1016/j.aca.2021.339344

Hybrid 3D printed-paper microfluidics

Arthur Zargaryan, Nathalie Farhoudi, George Haworth, Julian F. Ashby and Sam H. Au

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-75489-5

Fabrication of Complex 3D Fluidic Networks via Modularized Stereolithography

Terry Ching, Yi-Chin Toh and Michinao Hashimoto

Adv Eng Mater, 2020, 22
DOI: 10.1002/adem.201901109

Application of three-dimensional printing in interventional medicine

Geng Zhou, Weidong Liu, Yi Zhang, Wenquan Gu, Minghua Li, Chuan Lu, Ran Zhou, Yichen Che, Haitao Lu, Yueqi Zhu, Gaojun Teng and Yongde Cheng

Journal of Interventional Medicine, 2020, 3, 1
DOI: 10.1016/j.jimed.2020.01.001

Biosensors Designed for Clinical Applications

James F. Rusling and Robert J. Forster

Biomedicines, 2021, 9, 702
DOI: 10.3390/biomedicines9070702

3D printed pump based on vibrating blades to actively manipulate fluid

Zhiyong Tang, Xiufeng Shao, Jianze Huang, Guifu Ding and Jinyuan Yao

IOP Conf. Ser.: Earth Environ. Sci., 2019, 267, 042168
DOI: 10.1088/1755-1315/267/4/042168

3D-printed serpentine columns for size-exclusion chromatography with mass spectrometric detection

Olanrewaju Awoyemi, Jing Wang, Madison Pursell, Amanda Overby, Riley White, Stephen J. Valentine and Peng Li

Analytica Chimica Acta, 2026, 1383, 344887
DOI: 10.1016/j.aca.2025.344887

Design and optimization of projection stereolithography additive manufacturing system with multi-pass scanning

Qin Qin, Jigang Huang, Jin Yao and Wenxiang Gao

RPJ, 2021, 27, 636
DOI: 10.1108/RPJ-08-2019-0219

An easily fabricated three-dimensional threaded lemniscate-shaped micromixer for a wide range of flow rates

Mehdi Rafeie, Marcel Welleweerd, Amin Hassanzadeh-Barforoushi, Mohsen Asadnia, Wouter Olthuis and Majid Ebrahimi Warkiani

Biomicrofluidics, 2017, 11
DOI: 10.1063/1.4974904

3D-printed microfluidic manipulation device integrated with magnetic array

Jie Wu, Yiwen Cui, Shouhu Xuan and Xinglong Gong

Microfluid Nanofluid, 2018, 22
DOI: 10.1007/s10404-018-2123-8

Precise Integration of Polymeric Sensing Functional Materials within 3D Printed Microfluidic Devices

Jaione Etxebarria-Elezgarai, Maite Garcia-Hernando, Lourdes Basabe-Desmonts and Fernando Benito-Lopez

Chemosensors, 2023, 11, 253
DOI: 10.3390/chemosensors11040253

Surface Functionalization of 3D-Printed Bio-Inspired Scaffolds for Biomedical Applications: A Review

Yeon Soo Kim and Yoo Seob Shin

Biomimetics, 2024, 9, 703
DOI: 10.3390/biomimetics9110703

Redefining Quantum Dot Synthesis with Additive-Manufactured Microfluidics—A Review

Faisal bin Nasser Sarbaland, Masashi Kobayashi, Daiki Tanaka, Risa Fujita and Masahiro Furuya

J, 2025, 8, 18
DOI: 10.3390/j8020018

Can 3D Printing Bring Droplet Microfluidics to Every Lab?—A Systematic Review

Nafisat Gyimah, Ott Scheler, Toomas Rang and Tamas Pardy

Micromachines, 2021, 12, 339
DOI: 10.3390/mi12030339

Structural and Performance Comparison Between Su-8 Microfabricated and 3D-Printed Microneedle Electrodes

Ramin Soltanzadeh, Elnaz Afsharipour, Neda Anssari, Behzad Mansouri and Cyrus Shafai

J. 3D Print. Med., 2020, 4, 29
DOI: 10.2217/3dp-2019-0020

3D printing of metallic micro-gears for micro-fluidic applications

C. Wang, S. Chandra, X. P. Tan and S. B. Tor

J. Micromech. Mol. Phys., 2021, 06
DOI: 10.1142/S2424913021410022

Enabling consumer-grade 3D-printed optical instruments – a case study on design and fabrication of a spectrometer system using low-cost 3D printing technologies

Gregory D. Berglund and Tomasz S. Tkaczyk

Opt. Continuum, 2022, 1, 516
DOI: 10.1364/OPTCON.447693

Multifaceted polymeric materials in three‐dimensional processing (3DP) technologies: Current progress and prospects

Olayinka Oderinde, Shunli Liu, Kewen Li, Mengmeng Kang, Hussain Imtiaz, Fang Yao and Guodong Fu

Polymers for Advanced Techs, 2018, 29, 1586
DOI: 10.1002/pat.4281

Reduced surface adsorption in 3D printed acrylonitrile butadiene styrene micro free‐flow electrophoresis devices

Sarah K. Anciaux and Michael T. Bowser

Electrophoresis, 2020, 41, 225
DOI: 10.1002/elps.201900179

Novel Application of Polymer Networks Carrying Tertiary Amines as a Catalyst Inside Microflow Reactors Used for Knoevenagel Reactions

Patrik Berg, Franziska Obst, David Simon, Andreas Richter, Dietmar Appelhans and Dirk Kuckling

Eur J Org Chem, 2020, 2020, 5765
DOI: 10.1002/ejoc.202000978

Hybrid Laser Printing of 3D, Multiscale, Multimaterial Hydrogel Structures

Puskal Kunwar, Zheng Xiong, Yin Zhu, Haiyan Li, Alex Filip and Pranav Soman

Advanced Optical Materials, 2019, 7
DOI: 10.1002/adom.201900656

Low-cost origami fabrication of 3D self-aligned hybrid microfluidic structures

Janire Saez, Lourdes Basabe-Desmonts and Fernando Benito-Lopez

Microfluid Nanofluid, 2016, 20
DOI: 10.1007/s10404-016-1781-7

Fully 3D printed integrated reactor array for point-of-care molecular diagnostics

Karteek Kadimisetty, Jinzhao Song, Aoife M. Doto, Young Hwang, Jing Peng, Michael G. Mauk, Frederic D. Bushman, Robert Gross, Joseph N. Jarvis and Changchun Liu

Biosensors and Bioelectronics, 2018, 109, 156
DOI: 10.1016/j.bios.2018.03.009

Automated Quality and Process Control for Additive Manufacturing using Deep Convolutional Neural Networks

Yaser Banadaki, Nariman Razaviarab, Hadi Fekrmandi, Guoqiang Li, Patrick Mensah, Shuju Bai and Safura Sharifi

Recent Prog Mater, 2022, 04, 1
DOI: 10.21926/rpm.2201005

3D printing of bone tissue engineering scaffolds

Chong Wang, Wei Huang, Yu Zhou, Libing He, Zhi He, Ziling Chen, Xiao He, Shuo Tian, Jiaming Liao, Bingheng Lu, Yen Wei and Min Wang

Bioactive Materials, 2020, 5, 82
DOI: 10.1016/j.bioactmat.2020.01.004

Development of Biocompatible 3D-Printed Artificial Blood Vessels through Multidimensional Approaches

Jaewoo Choi, Eun Ji Lee, Woong Bi Jang and Sang-Mo Kwon

JFB, 2023, 14, 497
DOI: 10.3390/jfb14100497

Microfluidic technology and its application in the point-of-care testing field

Yaping Xie, Lizhong Dai and Yijia Yang

Biosensors and Bioelectronics: X, 2022, 10, 100109
DOI: 10.1016/j.biosx.2022.100109

Review on Recent Advances in Drug Development by Using 3D Printing Technology

G. R. Shiva Charan, M. Akiful Haque, Dibyalochan Mohanty and Vasudha Bakshi

Pharm Chem J, 2022, 56, 270
DOI: 10.1007/s11094-022-02630-1

Multichannel separation device with parallel electrochemical detection

Martina Komendová, Suhas Nawada, Radovan Metelka, Peter J. Schoenmakers and Jiří Urban

Journal of Chromatography A, 2020, 1610, 460537
DOI: 10.1016/j.chroma.2019.460537

Pencil graphite leads as simple amperometric sensors for microchip electrophoresis

Eiva Natiele Tiago da Silva, Jacqueline Marques Petroni, Bruno Gabriel Lucca and Valdir Souza Ferreira

Electrophoresis, 2017, 38, 2733
DOI: 10.1002/elps.201700160

A material odyssey for 3D nano/microstructures: two photon polymerization based nanolithography in bioapplications

Caizhi Liao, Alain Wuethrich and Matt Trau

Applied Materials Today, 2020, 19, 100635
DOI: 10.1016/j.apmt.2020.100635

Clinical Chemistry for Developing Countries: Mass Spectrometry

Suji Lee, Kavyasree Chintalapudi and Abraham K. Badu-Tawiah

Annual Rev. Anal. Chem., 2021, 14, 437
DOI: 10.1146/annurev-anchem-091520-085936

Improving the Resolution of 3D-Printed Molds for Microfluidics by Iterative Casting-Shrinkage Cycles

Miao Sun, Yanbo Xie, Jihong Zhu, Jun Li and Jan C. T. Eijkel

Anal. Chem., 2017, 89, 2227
DOI: 10.1021/acs.analchem.6b05148

Wettability-patterned microchip for emerging biomedical materials and technologies

Yiwei Li, Bi-Feng Liu and Xingcai Zhang

Materials Today, 2021, 51, 273
DOI: 10.1016/j.mattod.2021.10.008

Influence of Sharklet‐Inspired Micropatterned Polymers on Spatio‐Temporal Variations of Marine Biofouling

Elora Védie, Raphaëlle Barry‐Martinet, Vincent Senez, Mattias Berglin, Patrik Stenlund, Hugues Brisset, Christine Bressy and Jean‐François Briand

Macromolecular Bioscience, 2022, 22
DOI: 10.1002/mabi.202200304

Stereoselective Catalytic Synthesis of Active Pharmaceutical Ingredients in Homemade 3D‐Printed Mesoreactors

Sergio Rossi, Riccardo Porta, Davide Brenna, Alessandra Puglisi and Maurizio Benaglia

Angew Chem Int Ed, 2017, 56, 4290
DOI: 10.1002/anie.201612192

A broad overview on innovative functionalized paper solutions

Roberto Aguado, Dina Murtinho and Artur J. M. Valente

Nordic Pulp & Paper Research Journal, 2019, 34, 395
DOI: 10.1515/npprj-2019-0036

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms

Niall P. Macdonald, Joan M. Cabot, Petr Smejkal, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Anal. Chem., 2017, 89, 3858
DOI: 10.1021/acs.analchem.7b00136

Microfluidic-Based Single-Cell Study: Current Status and Future Perspective

Haiwa Wu, Jing Zhu, Yao Huang, Daming Wu and Jingyao Sun

Molecules, 2018, 23, 2347
DOI: 10.3390/molecules23092347

Microfluidics Based Point‐of‐Care Diagnostics

Chandra M. Pandey, Shine Augustine, Saurabh Kumar, Suveen Kumar, Sharda Nara, Saurabh Srivastava and Bansi D. Malhotra

Biotechnology Journal, 2018, 13
DOI: 10.1002/biot.201700047

Truly 3D microfluidic heating system with iterative structure of coil heaters and fluidic channels

Woojun Jung, Seonghyeon Lee and Yongha Hwang

Smart Mater. Struct., 2022, 31, 035016
DOI: 10.1088/1361-665X/ac4e50

A Review on New 3-D Printed Materials’ Geometries for Catalysis and Adsorption: Paradigms from Reforming Reactions and CO2 Capture

Ahmad Soliman, Nahla AlAmoodi, Georgios N. Karanikolos, Charalabos C. Doumanidis and Kyriaki Polychronopoulou

Nanomaterials, 2020, 10, 2198
DOI: 10.3390/nano10112198

Micropatterning of planar metal electrodes by vacuum filling microfluidic channel geometries

Stelios Chatzimichail, Pashiini Supramaniam, Oscar Ces and Ali Salehi-Reyhani

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-32706-6

Optimization of the sintering thermal treatment and the ceramic ink used in direct ink writing of α-Al2O3: Characterization and catalytic application

F. Álvarez, A. Cifuentes, I. Serrano, L. Franco, G. Fargas, F. Fenollosa, R. Uceda, L. Llanes, C. Tardivat, J. Llorca and J.J. Roa

Journal of the European Ceramic Society, 2022, 42, 2921
DOI: 10.1016/j.jeurceramsoc.2022.01.032

3D Droplet Microfluidic Systems for High-Throughput Biological Experimentation

Dong-Ku Kang, Xiuqing Gong, Soongwon Cho, Jin-young Kim, Joshua B. Edel, Soo-Ik Chang, Jaebum Choo and Andrew J. deMello

Anal. Chem., 2015, 87, 10770
DOI: 10.1021/acs.analchem.5b02402

An electric generator using living Torpedo electric organs controlled by fluid pressure-based alternative nervous systems

Yo Tanaka, Shun-ichi Funano, Yohei Nishizawa, Norihiro Kamamichi, Masahiro Nishinaka and Takehiko Kitamori

Sci Rep, 2016, 6
DOI: 10.1038/srep25899

Recent Advances and Future Perspectives on Microfluidic Mix-and-Jet Sample Delivery Devices

Majid Hejazian, Eugeniu Balaur and Brian Abbey

Micromachines, 2021, 12, 531
DOI: 10.3390/mi12050531

Pysanky to Microfluidics: An Innovative Wax-Based Approach to Low Cost, Rapid Prototyping of Microfluidic Devices

Philip J. Schneider, Liam B. Christie, Nicholas M. Eadie, Tyler J. Siskar, Viktor Sukhotskiy, Domin Koh, Anyang Wang and Kwang W. Oh

Micromachines, 2024, 15, 240
DOI: 10.3390/mi15020240

In vitro blood brain barrier models: An overview

Ekta Jagtiani, Mihika Yeolekar, Shivraj Naik and Vandana Patravale

Journal of Controlled Release, 2022, 343, 13
DOI: 10.1016/j.jconrel.2022.01.011

Microfluidic strategies for the blood-brain barrier construction and assessment

Fangchao Yin, Wentao Su, Li Wang and Qiongzheng Hu

TrAC Trends in Analytical Chemistry, 2022, 155, 116689
DOI: 10.1016/j.trac.2022.116689

Versatile Microfluidics for Biofabrication Platforms Enabled by an Agile and Inexpensive Fabrication Pipeline

Amirpasha Moetazedian, Alessia Candeo, Siyun Liu, Arran Hughes, Vahid Nasrollahi, Mozafar Saadat, Andrea Bassi, Liam M. Grover, Liam R. Cox and Gowsihan Poologasundarampillai

Adv Healthcare Materials, 2023, 12
DOI: 10.1002/adhm.202300636

Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays

Jakub Novotny, Zuzana Svobodova, Marie Ilicova, Dominika Hruskova, Jana Kostalova, Zuzana Bilkova and Frantisek Foret

Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06512-z

Fabricating a dielectrophoretic microfluidic device using 3D-printed moulds and silver conductive paint

Shayan Valijam, Daniel P. G. Nilsson, Dmitry Malyshev, Rasmus Öberg, Alireza Salehi and Magnus Andersson

Sci Rep, 2023, 13
DOI: 10.1038/s41598-023-36502-9

Simple approach for the fabrication of screen-printed carbon-based electrode for amperometric detection on microchip electrophoresis

Jacqueline Marques Petroni, Bruno Gabriel Lucca and Valdir Souza Ferreira

Analytica Chimica Acta, 2017, 954, 88
DOI: 10.1016/j.aca.2016.12.027

High-resolution stereolithography: Negative spaces enabled by control of fluid mechanics

Ian A. Coates, William Pan, Max A. Saccone, Gabriel Lipkowitz, Dan Ilyin, Madison M. Driskill, Maria T. Dulay, Curtis W. Frank, Eric S. G. Shaqfeh and Joseph M. DeSimone

Proc. Natl. Acad. Sci. U.S.A., 2024, 121
DOI: 10.1073/pnas.2405382121

Biosensors-on-chip: a topical review

Sensen Chen and Mohtashim H Shamsi

J. Micromech. Microeng., 2017, 27, 083001
DOI: 10.1088/1361-6439/aa7117

3D Printable Hydrogel Bioelectronic Interfaces for Healthcare Monitoring and Disease Diagnosis: Materials, Design Strategies, and Applications

Sayan Deb Dutta, Keya Ganguly, Aayushi Randhawa, Tejal V. Patil, Hojin Kim, Rumi Acharya and Ki‐Taek Lim

Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202301874

Advances in Microchip Liquid Chromatography

Xilong Yuan and Richard D. Oleschuk

Anal. Chem., 2018, 90, 283
DOI: 10.1021/acs.analchem.7b04329

3D Printing: Applications in evolution and ecology

Matthew Walker and Stuart Humphries

Ecology and Evolution, 2019, 9, 4289
DOI: 10.1002/ece3.5050

Rapid Prototyping of Organ-on-a-Chip Devices Using Maskless Photolithography

Dhanesh G. Kasi, Mees N. S. de Graaf, Paul A. Motreuil-Ragot, Jean-Phillipe M. S. Frimat, Michel D. Ferrari, Pasqualina M. Sarro, Massimo Mastrangeli, Arn M. J. M. van den Maagdenberg, Christine L. Mummery and Valeria V. Orlova

Micromachines, 2021, 13, 49
DOI: 10.3390/mi13010049

Wafer-scale 3D shaping of high aspect ratio structures by multistep plasma etching and corner lithography

Shu Ni, Erwin J. W. Berenschot, Pieter J. Westerik, Meint J. de Boer, René Wolf, Hai Le-The, Han J. G. E. Gardeniers and Niels R. Tas

Microsyst Nanoeng, 2020, 6
DOI: 10.1038/s41378-020-0134-6

Micropatterned conductive polymer biosensors on flexible PDMS films

Ramendra K. Pal, Sayantan Pradhan, Lokesh Narayanan and Vamsi K. Yadavalli

Sensors and Actuators B: Chemical, 2018, 259, 498
DOI: 10.1016/j.snb.2017.12.082

A Review on Additive Manufacturing of Micromixing Devices

Marina Garcia-Cardosa, Francisco-Javier Granados-Ortiz and Joaquín Ortega-Casanova

Micromachines, 2021, 13, 73
DOI: 10.3390/mi13010073

Bioprinters for organs-on-chips

Amir K Miri, Ebrahim Mostafavi, Danial Khorsandi, Shu-Kai Hu, Matthew Malpica and Ali Khademhosseini

Biofabrication, 2019, 11, 042002
DOI: 10.1088/1758-5090/ab2798

Advancing 3D printed microfluidics with computational methods for sweat analysis

Emre Ece, Kadriye Ölmez, Nedim Hacıosmanoğlu, Maryam Atabay and Fatih Inci

Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06231-5

3D printed microfluidic lab-on-a-chip device for fiber-based dual beam optical manipulation

Haoran Wang, Anton Enders, John-Alexander Preuss, Janina Bahnemann, Alexander Heisterkamp and Maria Leilani Torres-Mapa

Sci Rep, 2021, 11
DOI: 10.1038/s41598-021-93205-9

Chemical and biochemical analysis on lab-on-a-chip devices fabricated using three-dimensional printing

Yan Zhang, Shenguang Ge and Jinghua Yu

TrAC Trends in Analytical Chemistry, 2016, 85, 166
DOI: 10.1016/j.trac.2016.09.008

Numerical and experimental evaluation of SLA polymers adhesion for innovative bio-MEMS

Giorgio De Pasquale, Lorena Zappulla, Luciano Scaltrito and Valentina Bertana

Materials Today: Proceedings, 2019, 7, 572
DOI: 10.1016/j.matpr.2018.12.010

A 3D printed screw-and-nut based droplet generator with facile and precise droplet size controllability

Hau Van Nguyen, Huynh Quoc Nguyen, Van Dan Nguyen and Tae Seok Seo

Sensors and Actuators B: Chemical, 2019, 296, 126676
DOI: 10.1016/j.snb.2019.126676

A Microfluidic Organ-On-A-Chip: Into the Next Decade of Bone Tissue Engineering Applied in Dentistry

Muhammad Hidayat Syahruddin, Rahmi Anggraeni and Ika Dewi Ana

Future Sci. OA, 2023, 9
DOI: 10.2144/fsoa-2023-0061

Microfluidics engineering towards personalized oncology—a review

Sushmita Mishra and Murali Kumarasamy

In vitro models, 2023, 2, 69
DOI: 10.1007/s44164-023-00054-z

Fabrication of Microfluidic Tesla Valve Employing Femtosecond Bursts

Deividas Andriukaitis, Rokas Vargalis, Lukas Šerpytis, Tomas Drevinskas, Olga Kornyšova, Mantas Stankevičius, Kristina Bimbiraitė-Survilienė, Vilma Kaškonienė, Audrius Sigitas Maruškas and Linas Jonušauskas

Micromachines, 2022, 13, 1180
DOI: 10.3390/mi13081180

Adding Biomolecular Recognition Capability to 3D Printed Objects

Céline A. Mandon, Loïc J. Blum and Christophe A. Marquette

Anal. Chem., 2016, 88, 10767
DOI: 10.1021/acs.analchem.6b03426

Embedding objects during 3D printing to add new functionalities

Po Ki Yuen

Biomicrofluidics, 2016, 10
DOI: 10.1063/1.4958909

Evolution of 3d printing technology in fabrication of microfluidic devices and biological applications: a comprehensive review

Ranamay Saha, Moloy Sarkar, Sagnik Sarma Choudhury, Hemant Kumar, Geeta Bhatt and Shantanu Bhattacharya

Journal of Micromanufacturing, 2024, 7, 110
DOI: 10.1177/25165984241237357

High Throughput Nanoliposome Formation Using 3D Printed Microfluidic Flow Focusing Chips

Zhu Chen, Jung Yeon Han, Laura Shumate, Renee Fedak and Don L. DeVoe

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800511

Rapid Fabrication of Superhydrophobic Virtual Walls for Microfluidic Gas Extraction and Sensing

Wojciech Raj, Daisy Yang and Craig Priest

Micromachines, 2021, 12, 514
DOI: 10.3390/mi12050514

Lab-on-a-chip workshop activities for secondary school students

Mohammad M. N. Esfahani, Mark D. Tarn, Tahmina A. Choudhury, Laura C. Hewitt, Ashley J. Mayo, Theodore A. Rubin, Mathew R. Waller, Martin G. Christensen, Amy Dawson and Nicole Pamme

Biomicrofluidics, 2016, 10
DOI: 10.1063/1.4940884

Scalable 3D printing method for the manufacture of single-material fluidic devices with integrated filter for point of collection colourimetric analysis

Sepideh Keshan Balavandy, Feng Li, Niall P. Macdonald, Fernando Maya, Ashley T. Townsend, Kimberley Frederick, Rosanne M. Guijt and Michael C. Breadmore

Analytica Chimica Acta, 2021, 1151, 238101
DOI: 10.1016/j.aca.2020.11.033

A Review of the Impact of Microfluidics Technology on Sperm Selection Technique

Oluwabunmi Olatunji and Akash More

Cureus, 2022
DOI: 10.7759/cureus.27369

Emerging Application of Nanorobotics and Artificial Intelligence To Cross the BBB: Advances in Design, Controlled Maneuvering, and Targeting of the Barriers

Ajay Vikram Singh, Vaisali Chandrasekar, Poonam Janapareddy, Divya Elsa Mathews, Peter Laux, Andreas Luch, Yin Yang, Beatriz Garcia-Canibano, Shidin Balakrishnan, Julien Abinahed, Abdulla Al Ansari and Sarada Prasad Dakua

ACS Chem. Neurosci., 2021, 12, 1835
DOI: 10.1021/acschemneuro.1c00087

3D printed UV/VIS detection systems constructed from transparent filaments and immobilised enzymes

Elaheh Sirjani, Maciej Migas, Peter J. Cragg and Marcus K. Dymond

Additive Manufacturing, 2020, 33, 101094
DOI: 10.1016/j.addma.2020.101094

Fabrication of Aligned Biomimetic Gellan Gum-Chitosan Microstructures through 3D Printed Microfluidic Channels and Multiple In Situ Cross-Linking Mechanisms

Thomas M. Robinson, Sepehr Talebian, Javad Foroughi, Zhilian Yue, Cormac D. Fay and Gordon G. Wallace

ACS Biomater. Sci. Eng., 2020, 6, 3638
DOI: 10.1021/acsbiomaterials.0c00260

Chips: How to build and implement fluidic devices in flow based systems

Víctor Cerdà, Jessica Avivar and Daniel Moreno

Talanta, 2017, 166, 412
DOI: 10.1016/j.talanta.2015.11.073

Origami Biosystems: 3D Assembly Methods for Biomedical Applications

Vladimir A. Bolaños Quiñones, Hong Zhu, Alexander A. Solovev, Yongfeng Mei and David H. Gracias

Adv. Biosys., 2018, 2
DOI: 10.1002/adbi.201800230

Advances in 3D bioprinting for environmental remediation and hazardous materials treatment

Gobinath Vellalapalayam Manoharan, Naresh Babu Munuswamy, Jasmine Hephzipah Johnpeter, Sathya Veeramani and Hemalatha Balasubramanian

Environ Sci Pollut Res, 2024, 31, 55984
DOI: 10.1007/s11356-024-34921-3

Robust Production of Well‐Controlled Microdroplets in a 3D‐Printed Chimney‐Shaped Milli‐Fluidic Device

Yoon‐Ho Hwang, Taewoong Um, Jiwoo Hong, Gwang‐Noh Ahn, Juan Qiao, In Seok Kang, Li Qi, Hyomin Lee and Dong‐Pyo Kim

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201900457

Biological applications of microchip electrophoresis with amperometric detection: in vivo monitoring and cell analysis

Kelci M. Schilly, Shamal M. Gunawardhana, Manjula B. Wijesinghe and Susan M. Lunte

Anal Bioanal Chem, 2020, 412, 6101
DOI: 10.1007/s00216-020-02647-z

Microtubule-dependent pushing forces contribute to long-distance aster movement and centration inXenopus laevisegg extracts

Taylor Sulerud, Abdullah Bashar Sami, Guihe Li, April Kloxin, John Oakey, Jesse Gatlin and Claire Walczak

MBoC, 2020, 31, 2791
DOI: 10.1091/mbc.E20-01-0088

Recent advances in microfluidic technology for manipulation and analysis of biological cells (2007–2017)

Md Kowsar Alam, Emmanuel Koomson, Heng Zou, Changqing Yi, Cheuk-Wing Li, Tao Xu and Mengsu Yang

Analytica Chimica Acta, 2018, 1044, 29
DOI: 10.1016/j.aca.2018.06.054

Revolutionizing biocatalysis: A review on innovative design and applications of enzyme-immobilized microfluidic devices

Pravin D. Patil, Niharika Gargate, Khushi Dongarsane, Hrishikesh Jagtap, Ajay N. Phirke, Manishkumar S. Tiwari and Shamraja S. Nadar

International Journal of Biological Macromolecules, 2024, 281, 136193
DOI: 10.1016/j.ijbiomac.2024.136193

Microfluidic EBG Sensor Based on Phase-Shift Method Realized Using 3D Printing Technology

Vasa Radonić, Slobodan Birgermajer and Goran Kitić

Sensors, 2017, 17, 892
DOI: 10.3390/s17040892

3D Printing: The Second Dawn of Lab-On-Valve Fluidic Platforms for Automatic (Bio)Chemical Assays

David J. Cocovi-Solberg, María Rosende, Michał Michalec and Manuel Miró

Anal. Chem., 2019, 91, 1140
DOI: 10.1021/acs.analchem.8b04900

Lab-on-a-Chip Technologies for Microgravity Simulation and Space Applications

Aditya Vashi, Kamalalayam Rajan Sreejith and Nam-Trung Nguyen

Micromachines, 2022, 14, 116
DOI: 10.3390/mi14010116

Micro-optofluidic Devices via Projection Micro-Stereolithography: Impact of Resin Reuse on Optical Sensing Performance

Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Gianluca Cicala and Maide Bucolo

Int J Adv Manuf Technol, 2025, 141, 1635
DOI: 10.1007/s00170-025-16735-w

A 3D-printed microbial cell culture platform with in situ PEGDA hydrogel barriers for differential substrate delivery

Andrea L. Kadilak, Jessica C. Rehaag, Cameron A. Harrington and Leslie M. Shor

Biomicrofluidics, 2017, 11
DOI: 10.1063/1.5003477

Monolithic, 3D-printed lab-on-disc platform for multiplexed molecular detection of SARS-CoV-2

Xiong Ding, Ziyue Li and Changchun Liu

Sensors and Actuators B: Chemical, 2022, 351, 130998
DOI: 10.1016/j.snb.2021.130998

An electrohydrodynamic jet printer with integrated metrology

Christopher P. Pannier, Lauro Ojeda, Zhi Wang, David Hoelzle and Kira Barton

Mechatronics, 2018, 56, 268
DOI: 10.1016/j.mechatronics.2018.01.001

A Rapid Prototyping Technique for Microfluidics with High Robustness and Flexibility

Zhenhua Liu, Wenchao Xu, Zining Hou and Zhigang Wu

Micromachines, 2016, 7, 201
DOI: 10.3390/mi7110201

On-Chip CMOS-MEMS-Based Electroosmotic Flow Micropump Integrated With High-Voltage Generator

Yuki Okamoto, Hiroyuki Ryoson, Koji Fujimoto, Takayuki Ohba and Yoshio Mita

J. Microelectromech. Syst., 2020, 29, 86
DOI: 10.1109/JMEMS.2019.2953290

Biodiesel synthesis in micromixer with static elements

Harrson S. Santana, Deborah S. Tortola, João L. Silva and Osvaldir P. Taranto

Energy Conversion and Management, 2017, 141, 28
DOI: 10.1016/j.enconman.2016.03.089

Spheroids-on-a-chip: Recent advances and design considerations in microfluidic platforms for spheroid formation and culture

Khashayar Moshksayan, Navid Kashaninejad, Majid Ebrahimi Warkiani, John G. Lock, Hajar Moghadas, Bahar Firoozabadi, Mohammad Said Saidi and Nam-Trung Nguyen

Sensors and Actuators B: Chemical, 2018, 263, 151
DOI: 10.1016/j.snb.2018.01.223

Fabrication of concave micromirrors for single cell imaging via controlled over-exposure of organically modified ceramics in single step lithography

A. Bonabi, S. Cito, P. Tammela, V. Jokinen and T. Sikanen

Biomicrofluidics, 2017, 11
DOI: 10.1063/1.4985653

Recent advancements in microfluidic-based biosensors for detection of genes and proteins: Applications and techniques

Saeed Siavashy, M. Soltani, Shayan Rahimi, Mehraveh Hosseinali, Zahra Guilandokht and Kaamran Raahemifar

Biosensors and Bioelectronics: X, 2024, 19, 100489
DOI: 10.1016/j.biosx.2024.100489

Real-time computer assisted measurement of oocyte and embryo volume for assessment of transport parameters

Frankie Tu, Maajid Bhat and James D. Benson

Cryobiology, 2022, 108, 19
DOI: 10.1016/j.cryobiol.2022.08.005

Arthroscopic Airbrush-Assisted Cell Spraying for Cartilage Repair: Design, Development, and Characterization of Custom-Made Arthroscopic Spray Nozzles

Koen Dijkstra, Jan Hendriks, Marcel Karperien, Lucienne A. Vonk and Daniël B.F. Saris

Tissue Engineering Part C: Methods, 2017, 23, 505
DOI: 10.1089/ten.tec.2017.0228

3D-printed clay-based ceramic water filters for point-of-use water treatment applications

Akuemaho Virgile Onésime Akowanou, Hontonho Espérance Justine Deguenon, Leo Groendijk, Martin Pépin Aina, Benjamin Kouassi Yao and Patrick Drogui

Prog Addit Manuf, 2019, 4, 315
DOI: 10.1007/s40964-019-00091-9

Point-of-Need DNA Testing for Detection of Foodborne Pathogenic Bacteria

Jasmina Vidic, Priya Vizzini, Marisa Manzano, Devon Kavanaugh, Nalini Ramarao, Milica Zivkovic, Vasa Radonic, Nikola Knezevic, Ioanna Giouroudi and Ivana Gadjanski

Sensors, 2019, 19, 1100
DOI: 10.3390/s19051100

Shape-Programmable Three-Dimensional Microfluidic Structures

Zizheng Wang, Hao Jiang, Guangfu Wu, Yi Li, Teng Zhang, Yi Zhang and Xueju Wang

ACS Appl. Mater. Interfaces, 2022, 14, 15599
DOI: 10.1021/acsami.1c24799

Assessing the Reusability of 3D-Printed Photopolymer Microfluidic Chips for Urine Processing

Eric Lepowsky, Reza Amin and Savas Tasoglu

Micromachines, 2018, 9, 520
DOI: 10.3390/mi9100520

Classification of challenges in 3D printing for combined electrochemical and microfluidic applications: a review

Arivarasi A. and Anand Kumar

RPJ, 2019, 25, 1328
DOI: 10.1108/RPJ-05-2018-0115

3D‐Druck miniaturisierter und mikrofluidischer Systeme

Anton Enders and Janina Bahnemann

Chemie in nserer Zeit, 2022, 56, 286
DOI: 10.1002/ciuz.202100019

Enhancing hydrophilicity of PDMS surfaces through graphene oxide deposition

Elie Ayoub, Fadi Dawaymeh, Maryam Khaleel and Nahla Alamoodi

J Mater Sci, 2024, 59, 8205
DOI: 10.1007/s10853-024-09695-1

Seeing the Light: Advancing Materials Chemistry through Photopolymerization

Nathaniel Corrigan, Jonathan Yeow, Peter Judzewitsch, Jiangtao Xu and Cyrille Boyer

Angew Chem Int Ed, 2019, 58, 5170
DOI: 10.1002/anie.201805473

FDM 3D Printing of High-Pressure, Heat-Resistant, Transparent Microfluidic Devices

Valentin Romanov, Raheel Samuel, Marzieh Chaharlang, Alexander R. Jafek, Adam Frost and Bruce K. Gale

Anal. Chem., 2018, 90, 10450
DOI: 10.1021/acs.analchem.8b02356

Microsphere based continuous-flow immunoassay in a microfluidic device for determination of clinically relevant insulin levels

Noa Cohen, Pooja Sabhachandani, Saheli Sarkar, Lindy Kahanovitz, Norman Lautsch, Steven J. Russell and Tania Konry

Microchim Acta, 2017, 184, 835
DOI: 10.1007/s00604-017-2072-z

Evaluation of the effect of coupling agent on the kinetic and mechanical properties of a 3D printable dual curing epoxy/acrylate system

A.A. Escriba-Flores, X. Fernández-Francos, F. Ferrando and A. Fabregat-Sanjuan

European Polymer Journal, 2025, 229, 113878
DOI: 10.1016/j.eurpolymj.2025.113878

Additive Manufacturing of Biomaterials, Tissues, and Organs

Amir A. Zadpoor and Jos Malda

Ann Biomed Eng, 2017, 45, 1
DOI: 10.1007/s10439-016-1719-y

Recent advancements in microphysiological systems for neural development and disease

Kyla Nichols, Ryan Koppes and Abigail Koppes

Current Opinion in Biomedical Engineering, 2020, 14, 42
DOI: 10.1016/j.cobme.2020.05.003

Integration of 2D Nanoporous Membranes in Microfluidic Devices

Niketa AK and Shishir Kumar

ACS Omega, 2024, 9, 22305
DOI: 10.1021/acsomega.4c01688

Numerical study of droplet dynamics in a steady electric field using a hybrid lattice Boltzmann and finite volume method

Yutong Cui, Ningning Wang and Haihu Liu

Physics of Fluids, 2019, 31
DOI: 10.1063/1.5080210

Biocompatible PEGDA Resin for 3D Printing

Chandler Warr, Jonard Corpuz Valdoz, Bryce P. Bickham, Connor J. Knight, Nicholas A. Franks, Nicholas Chartrand, Pam M. Van Ry, Kenneth A. Christensen, Gregory P. Nordin and Alonzo D. Cook

ACS Appl. Bio Mater., 2020, 3, 2239
DOI: 10.1021/acsabm.0c00055

A review of 3D-printed sensors

Yujie Ni, Ru Ji, Kaiwen Long, Ting Bu, Kejian Chen and Songlin Zhuang

Applied Spectroscopy Reviews, 2017, 52, 623
DOI: 10.1080/05704928.2017.1287082

3D-printed microfluidic device for the synthesis of silver and gold nanoparticles

Lucas P. Bressan, Jessica Robles-Najar, Cristina B. Adamo, Reverson F. Quero, Brenda M.C. Costa, Dosil P. de Jesus and José A.F. da Silva

Microchemical Journal, 2019, 146, 1083
DOI: 10.1016/j.microc.2019.02.043

An Airlift Crystallizer for Protein Crystallization

Kiran Mathew Thomas and Richard Lakerveld

Ind. Eng. Chem. Res., 2019, 58, 20381
DOI: 10.1021/acs.iecr.9b03535

Grow with the Flow: When Morphogenesis Meets Microfluidics

Pinak Samal, Clemens van Blitterswijk, Roman Truckenmüller and Stefan Giselbrecht

Advanced Materials, 2019, 31
DOI: 10.1002/adma.201805764

Improved process for forming a three-dimensional undersurface on a printed cantilever

Shusuke Kanazawa, Yasuyuki Kusaka, Noritaka Yamamoto and Hirobumi Ushijima

Jpn. J. Appl. Phys., 2018, 57, 05GB01
DOI: 10.7567/JJAP.57.05GB01

Microfluidic System for Cell Mixing and Particle Focusing Using Dean Flow Fractionation

Alexander Wiede, Ondrej Stranik, Astrid Tannert and Ute Neugebauer

Micro, 2023, 3, 671
DOI: 10.3390/micro3030047

Monolithic, 3D-Printed Microfluidic Platform for Recapitulation of Dynamic Tumor Microenvironments

Ashley L. Beckwith, Jeffrey T. Borenstein and Luis Fernando Velasquez-Garcia

J. Microelectromech. Syst., 2018, 27, 1009
DOI: 10.1109/JMEMS.2018.2869327

Blood brain barrier: A tissue engineered microfluidic chip

Sikkandhar Musafargani, Sachin Mishra, Miklós Gulyás, P. Mahalakshmi, Govindaraju Archunan, Parasuraman Padmanabhan and Balázs Gulyás

Journal of Neuroscience Methods, 2020, 331, 108525
DOI: 10.1016/j.jneumeth.2019.108525

Additive Manufacturing Technologies: 3D Printing in Organic Synthesis

Sergio Rossi, Alessandra Puglisi and Maurizio Benaglia

ChemCatChem, 2018, 10, 1512
DOI: 10.1002/cctc.201701619

Plug actuation and active manipulation in closed monolithic fluidics using backpressure

N. Vourdas, G. Pashos, E. Rizos, G. Kokkoris, E. Tsampasis, E. Klouvidaki, A.G. Boudouvis and V.N. Stathopoulos

Microelectronic Engineering, 2019, 216, 111046
DOI: 10.1016/j.mee.2019.111046

The recent development and applications of fluidic channels by 3D printing

Yufeng Zhou

J Biomed Sci, 2017, 24
DOI: 10.1186/s12929-017-0384-2

Centrifugation-Assisted Three-Dimensional Printing of Devices Embedded with Fully Enclosed Microchannels

Chia-Heng Chu, Enerelt Burentugs, Dohwan Lee, Jacob M. Owens, Ruxiu Liu, Albert B. Frazier and A. Fatih Sarioglu

3D Printing and Additive Manufacturing, 2023, 10, 609
DOI: 10.1089/3dp.2021.0133

High‐Scale 3D‐Bioprinting Platform for the Automated Production of Vascularized Organs‐on‐a‐Chip

Anna Fritschen, Nils Lindner, Sebastian Scholpp, Philipp Richthof, Jonas Dietz, Philipp Linke, Zeno Guttenberg and Andreas Blaeser

Adv Healthcare Materials, 2024, 13
DOI: 10.1002/adhm.202304028

Enabling Microfluidics: from Clean Rooms to Makerspaces

David I. Walsh, David S. Kong, Shashi K. Murthy and Peter A. Carr

Trends in Biotechnology, 2017, 35, 383
DOI: 10.1016/j.tibtech.2017.01.001

Microfluidics for Two-Dimensional Nanosheets: A Mini Review

Chang-Ho Choi, Yeongwon Kwak, Rajiv Malhotra and Chih-Hung Chang

Processes, 2020, 8, 1067
DOI: 10.3390/pr8091067

Uniform electric field generation in circular multi-well culture plates using polymeric inserts

Hsieh-Fu Tsai, Ji-Yen Cheng, Hui-Fang Chang, Tadashi Yamamoto and Amy Q. Shen

Sci Rep, 2016, 6
DOI: 10.1038/srep26222

A Benchmark Artifact to Evaluate the Manufacturing of Microfeatures by Digital Light Processing Stereolithography

Lara Rebaioli and Irene Fassi

Journal of Micro and Nano-Manufacturing, 2020, 8
DOI: 10.1115/1.4046042

Determination of red blood cell deformability using centrifugal force in a three-dimensional-printed mini-disk (3D-PMD)

Hyunjung Lim, Seung Min Back, Jeonghun Nam, Hyuk Choi and Jeffrey Chalmers

PLoS ONE, 2018, 13, e0197619
DOI: 10.1371/journal.pone.0197619

Addressing Unmet Clinical Needs with 3D Printing Technologies

Udayan Ghosh, Shen Ning, Yuzhu Wang and Yong Lin Kong

Adv Healthcare Materials, 2018, 7
DOI: 10.1002/adhm.201800417

A System for Analog Control of Cell Culture Dynamics to Reveal Capabilities of Signaling Networks

Chaitanya S. Mokashi, David L. Schipper, Mohammad A. Qasaimeh and Robin E.C. Lee

iScience, 2019, 19, 586
DOI: 10.1016/j.isci.2019.08.010

Scopes and challenges of microfluidic technology for nanoparticle synthesis, photocatalysis and sensor applications: A comprehensive review

Anindita Saikia, Rachita Newar, Saikat Das, Astha Singh, Deepak J. Deuri and Arabinda Baruah

Chemical Engineering Research and Design, 2023, 193, 516
DOI: 10.1016/j.cherd.2023.03.049

Simple Approaches to Minimally-Instrumented, Microfluidic-Based Point-of-Care Nucleic Acid Amplification Tests

Michael Mauk, Jinzhao Song, Changchun Liu and Haim Bau

Biosensors, 2018, 8, 17
DOI: 10.3390/bios8010017

Study of BBB Dysregulation in Neuropathogenicity Using Integrative Human Model of Blood–Brain Barrier

Coraly Simöes Da Gama and Mélanie Morin-Brureau

Front. Cell. Neurosci., 2022, 16
DOI: 10.3389/fncel.2022.863836

Organoids and Microphysiological Systems: New Tools for Ophthalmic Drug Discovery

Jing Bai and Chunming Wang

Front. Pharmacol., 2020, 11
DOI: 10.3389/fphar.2020.00407

3D-printed bioanalytical devices

Gregory W Bishop, Jennifer E Satterwhite-Warden, Karteek Kadimisetty and James F Rusling

Nanotechnology, 2016, 27, 284002
DOI: 10.1088/0957-4484/27/28/284002

Compatibility analysis of 3D printer resin for biological applications

Shilpa Sivashankar, Sumeyra Agambayev, Kholod Alamoudi, Ulrich Buttner, Niveen Khashab and Khaled Nabil Salama

Micro & Nano Letters, 2016, 11, 654
DOI: 10.1049/mnl.2016.0530

Programmed Internal Reconfigurations in a 3D‐Printed Mechanical Metamaterial Enable Fluidic Control for a Vertically Stacked Valve Array

Tinku Supakar, David Space, Sophy Mejia, Rou Yu Tan, Jeffrey R. Alston and Eric A. Josephs

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202315419

Microfluidic devices for the study of sperm migration

S. S. Suarez and M. Wu

Mol. Hum. Reprod., 2016
DOI: 10.1093/molehr/gaw039

Recent Advances in Analytical Chemistry by 3D Printing

Bethany Gross, Sarah Y. Lockwood and Dana M. Spence

Anal. Chem., 2017, 89, 57
DOI: 10.1021/acs.analchem.6b04344

Chemotactic Responses of Jurkat Cells in Microfluidic Flow-Free Gradient Chambers

Utku M. Sonmez, Adam Wood, Kyle Justus, Weijian Jiang, Fatima Syed-Picard, Philip R. LeDuc, Pawel Kalinski and Lance A. Davidson

Micromachines, 2020, 11, 384
DOI: 10.3390/mi11040384

Fused Deposition Modeling 3D Printing for (Bio)analytical Device Fabrication: Procedures, Materials, and Applications

Gert IJ. Salentijn, Pieter E. Oomen, Maciej Grajewski and Elisabeth Verpoorte

Anal. Chem., 2017, 89, 7053
DOI: 10.1021/acs.analchem.7b00828

Review of 3D-Printed functionalized devices for chemical and biochemical analysis

Cheng-Kuan Su

Analytica Chimica Acta, 2021, 1158, 338348
DOI: 10.1016/j.aca.2021.338348

Construction, Features and Regulatory Aspects of Organ-chip for Drug Delivery Applications: Advances and Prospective

Babita Gupta, Rishabha Malviya, Saurabh Srivastava, Irfan Ahmad, Safia Obaidur Rab and Prerna Uniyal

CPD, 2024, 30, 1952
DOI: 10.2174/0113816128305296240523112043

Translational Nanomedicines Across Human Reproductive Organs Modeling on Microfluidic Chips: State-of-the-Art and Future Prospects

Ankur Sood, Anuj Kumar, Vijai Kumar Gupta, Chul Min Kim and Sung Soo Han

ACS Biomater. Sci. Eng., 2023, 9, 62
DOI: 10.1021/acsbiomaterials.2c01080

Microfluidic 3D Helix Mixers

Georgette Salieb-Beugelaar, Daniel Gonçalves, Marc Wolf and Patrick Hunziker

Micromachines, 2016, 7, 189
DOI: 10.3390/mi7100189

Printing of Woodpile Scaffold Using Fresnel Lens for Tissue Engineering

Chee Meng Benjamin Ho, Kan Hu, Abhinay Mishra, Jinhong Noh, Jeonghwan Kim, Suhan Lee, MinSung Yoon and Yong-Jin Yoon

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2022, 9, 507
DOI: 10.1007/s40684-021-00322-x

Microfluidic bioprinting for organ-on-a-chip models

Fang Yu and Deepak Choudhury

Drug Discovery Today, 2019, 24, 1248
DOI: 10.1016/j.drudis.2019.03.025

Non-Lithographic Silicon Micromachining Using Inkjet and Chemical Etching

Sasha Hoshian, Cristina Gaspar, Teemu Vasara, Farzin Jahangiri, Ville Jokinen and Sami Franssila

Micromachines, 2016, 7, 222
DOI: 10.3390/mi7120222

Assessing reusability of microfluidic devices: Urinary protein uptake by PDMS-based channels after long-term cyclic use

Reza Amin, Lu Li and Savas Tasoglu

Talanta, 2019, 192, 455
DOI: 10.1016/j.talanta.2018.08.053

A Miniature System for Separation and Detection of PM Based on 3-D Printed Virtual Impactor and QCM Sensor

Yong Wang, Yinshen Wang, Dongyang Chen, Xinxin Liu, Changju Wu and Jin Xie

IEEE Sensors J., 2018, 18, 6130
DOI: 10.1109/JSEN.2018.2844876

In vitro modeling of the neurovascular unit: advances in the field

Aditya Bhalerao, Farzane Sivandzade, Sabrina Rahman Archie, Ekram Ahmed Chowdhury, Behnam Noorani and Luca Cucullo

Fluids Barriers CNS, 2020, 17
DOI: 10.1186/s12987-020-00183-7

On the potential use of two-photon polymerization to 3D print chromatographic packed bed supports

Fréderick Matheuse, Koen Vanmol, Jürgen Van Erps, Wim De Malsche, Heidi Ottevaere and Gert Desmet

Journal of Chromatography A, 2022, 1663, 462763
DOI: 10.1016/j.chroma.2021.462763

Additive manufacturing of polymer nanocomposites: Needs and challenges in materials, processes, and applications

Ans Al Rashid, Shoukat Alim Khan, Sami G. Al-Ghamdi and Muammer Koç

Journal of Materials Research and Technology, 2021, 14, 910
DOI: 10.1016/j.jmrt.2021.07.016

Bioprinting: A review of processes, materials and applications

Bengi Yilmaz, Ans Al Rashid, Younss Ait Mou, Zafer Evis and Muammer Koç

Bioprinting, 2021, 23, e00148
DOI: 10.1016/j.bprint.2021.e00148

Optical Etching to Pattern Microstructures on Plastics by Vacuum Ultraviolet Light

Tomotaka Doi and Takatoki Yamamoto

Materials, 2020, 13, 2206
DOI: 10.3390/ma13092206

Cell-instructive microfibers enable programmable alignment of bioprinted hMSC

A. Neuhäusler, N. Kötting, L. Keuper, N. Lindner, E. Schätzlein and A. Blaeser

Bioactive Materials, 2026, 55, 503
DOI: 10.1016/j.bioactmat.2025.09.027

Engineering stimuli‐responsive shape‐morphing through high‐resolution 4D printing

Shuheng Li, Ming Gao, Wenwan Shi, Xiaolu Sun, Yuning Zhou, Lihao Liu, Ji Qiu, Xiaoxiang Gao, Jing Sun, Xiaojiang Liu and Zhongze Gu

Responsive Materials, 2025, 3
DOI: 10.1002/rpm2.70025

Vat photopolymerization of polymers and polymer composites: Processes and applications

Ans Al Rashid, Waqas Ahmed, Muhammad Yasir Khalid and Muammer Koç

Additive Manufacturing, 2021, 47, 102279
DOI: 10.1016/j.addma.2021.102279

3D Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering

Chee Meng Benjamin Ho, Abhinay Mishra, Pearlyn Teo Pei Lin, Sum Huan Ng, Wai Yee Yeong, Young‐Jin Kim and Yong‐Jin Yoon

Macromolecular Bioscience, 2017, 17
DOI: 10.1002/mabi.201600250

3D neural tissue models: From spheroids to bioprinting

Pei Zhuang, Alfred Xuyang Sun, Jia An, Chee Kai Chua and Sing Yian Chew

Biomaterials, 2018, 154, 113
DOI: 10.1016/j.biomaterials.2017.10.002

Dielectrophoresis: From Molecular to Micrometer-Scale Analytes

Daihyun Kim, Mukul Sonker and Alexandra Ros

Anal. Chem., 2019, 91, 277
DOI: 10.1021/acs.analchem.8b05454

Organ-On-A-Chip: A Survey of Technical Results and Problems

Alex Ede Danku, Eva-H Dulf, Cornelia Braicu, Ancuta Jurj and Ioana Berindan-Neagoe

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.840674

Adhesive bonding strategies to fabricate high-strength and transparent 3D printed microfluidic device

Seren Kecili and H. Cumhur Tekin

Biomicrofluidics, 2020, 14
DOI: 10.1063/5.0003302

Fabrication of a Cell Culture Plate With a Three-Dimensional Printed Mold and Thermal Analysis of PDMS-Based Casting Process

Myo Min Zaw, William D. Hedrich, Timothy Munuhe, Mohamad Hossein Banazadeh, Hongbing Wang, S. Andrew Gadsden, Liang Zhu and Ronghui Ma

Journal of Thermal Science and Engineering Applications, 2018, 10
DOI: 10.1115/1.4040134

3D printed microfluidic chip for multiple anticancer drug combinations

Xiaojun Chen, Hong Chen, Dezhi Wu, Qinnan Chen, Zhou Zhou, Rongrong Zhang, Xingyue Peng, Yu-Chuan Su and Daoheng Sun

Sensors and Actuators B: Chemical, 2018, 276, 507
DOI: 10.1016/j.snb.2018.08.121

Design of capillary microfluidics for spinning cell-laden microfibers

Yunru Yu, Luoran Shang, Jiahui Guo, Jie Wang and Yuanjin Zhao

Nat Protoc, 2018, 13, 2557
DOI: 10.1038/s41596-018-0051-4

Preparing of Interdigitated Microelectrode Arrays for AC Electrokinetic Devices Using Inkjet Printing of Silver Nanoparticles Ink

Van-Thai Tran, Yuefan Wei, Wei Liau, Hongyi Yang and Hejun Du

Micromachines, 2017, 8, 106
DOI: 10.3390/mi8040106

3D printing enables the rapid prototyping of modular microfluidic devices for particle conjugation

Steven A. Vasilescu, Sajad Razavi Bazaz, Dayong Jin, Olga Shimoni and Majid Ebrahimi Warkiani

Applied Materials Today, 2020, 20, 100726
DOI: 10.1016/j.apmt.2020.100726

In Situ Transmission X-ray Micro-Diffraction from Thin Metal Films Electrodeposited in Microfluidic Channels

T. Wiegmann, J. Drnec, F. Reikowski, J. Stettner, F. Maroun and O. M. Magnussen

J. Electrochem. Soc., 2020, 167, 112505
DOI: 10.1149/1945-7111/aba077

Homebrew Photolithography for the Rapid and Low-Cost, “Do It Yourself” Prototyping of Microfluidic Devices

Daniel Todd and Natalio Krasnogor

ACS Omega, 2023, 8, 35393
DOI: 10.1021/acsomega.3c05544

3D Bioprinting in Plant Science: An Interdisciplinary Approach

Shakti Mehrotra, Smita Kumar, Vikas Srivastava, Taijshee Mishra and Bhartendu Nath Mishra

Trends in Plant Science, 2020, 25, 9
DOI: 10.1016/j.tplants.2019.10.014

An aerosol sensor for PM1 concentration detection based on 3D printed virtual impactor and SAW sensor

Yong Wang, Yinshen Wang, Weixin Liu, Dongyang Chen, Changju Wu and Jin Xie

Sensors and Actuators A: Physical, 2019, 288, 67
DOI: 10.1016/j.sna.2019.01.013

Projection micro-stereolithography versus master–slave approach to manufacture a micro-optofluidic device for slug flow detection

Lorena Saitta, Giovanni Celano, Gianluca Cicala, Maria Elena Fragalà, Giovanna Stella, Matteo Barcellona, Claudio Tosto and Maide Bucolo

Int J Adv Manuf Technol, 2022, 120, 4443
DOI: 10.1007/s00170-022-08889-8

“Do-it-in-classroom” fabrication of microfluidic systems by replica moulding of pasta structures

Ngan Nguyen, Peter Thurgood, Jiu Yang Zhu, Elena Pirogova, Sara Baratchi and Khashayar Khoshmanesh

Biomicrofluidics, 2018, 12
DOI: 10.1063/1.5042684

Improvement of quality of 3D printed objects by elimination of microscopic structural defects in fused deposition modeling

Evgeniy G. Gordeev, Alexey S. Galushko, Valentine P. Ananikov and Michael C. McAlpine

PLoS ONE, 2018, 13, e0198370
DOI: 10.1371/journal.pone.0198370

Laser‐Assisted Direct Ink Writing for High‐Fidelity Fabrication of Elastomeric Complex Structures

Erwei Shang, Guodong Li, Zilong Zhao, Nana Zhang, Daming Fan and Yu Liu

Adv Materials Inter, 2023, 10
DOI: 10.1002/admi.202300300

Advances in 3D Bioprinting

Yongcong Fang, Yuzhi Guo, Tiankun Liu, Runze Xu, Shuangshuang Mao, Xingwu Mo, Ting Zhang, Liliang Ouyang, Zhuo Xiong and Wei Sun

Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022, 1, 100011
DOI: 10.1016/j.cjmeam.2022.100011

Effect of 3D-Printed Microvascular Network Design on the Self-Healing Behavior of Cross-Linked Polymers

G. Postiglione, M. Alberini, S. Leigh, M. Levi and S. Turri

ACS Appl. Mater. Interfaces, 2017, 9, 14371
DOI: 10.1021/acsami.7b01830

3D Printing for medical devices: Mini review and bibliometric study

Marcel Martawidjaja, Sharon Yemima, Nico Hananda, Azure Kamul, Stefanus Hanifa Prajitna, Christian Harito, Rudy Susanto, T.N. Mursitama, Noerlina, D.N. Utama and S.A. Abrori

E3S Web Conf., 2023, 426, 01077
DOI: 10.1051/e3sconf/202342601077

Green and equitable analytical chemistry

Renata Marcinkowska, Jacek Namieśnik and Marek Tobiszewski

Current Opinion in Green and Sustainable Chemistry, 2019, 19, 19
DOI: 10.1016/j.cogsc.2019.04.003

Synthesis of Reconfigurable Flow-Based Biochips for Scalable Single-Cell Screening

Mohamed Ibrahim, Aditya Sridhar, Krishnendu Chakrabarty and Ulf Schlichtmann

IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst., 2019, 38, 2255
DOI: 10.1109/TCAD.2018.2878159

Cryo-printed microfluidics enable rapid prototyping for optical-cell analysis

Rokas Garmasukis, Claudia Hackl, Christian Dusny, Christian Elsner, Ales Charvat, Andreas Schmid and Bernd Abel

Microfluid Nanofluid, 2023, 27
DOI: 10.1007/s10404-022-02613-4

A review on fabricating tissue scaffolds using vat photopolymerization

Nicholas A. Chartrain, Christopher B. Williams and Abby R. Whittington

Acta Biomaterialia, 2018, 74, 90
DOI: 10.1016/j.actbio.2018.05.010

Compatibility of Popular Three-Dimensional Printed Microfluidics Materials with In Vitro Enzymatic Reactions

Wan-Zhen Sophie Lin, William E. Evenson, W. Kristian Vu Bostic, Richard W. Roberts and Noah Malmstadt

ACS Appl. Bio Mater., 2022, 5, 818
DOI: 10.1021/acsabm.1c01180

Development of a Scaffold-on-a-Chip Platform to Evaluate Cell Infiltration and Osteogenesis on the 3D-Printed Scaffold for Bone Regeneration

Jinsub Han, Sangbae Park, Jae Eun Kim, Byeongjoo Park, Yeonggeol Hong, Jae Woon Lim, Seung Jeong, Hyunmok Son, Hong Bae Kim, Hoon Seonwoo, Kyoung-Je Jang and Jong Hoon Chung

ACS Biomater. Sci. Eng., 2023, 9, 968
DOI: 10.1021/acsbiomaterials.2c01367

Microfluidics: innovative approaches for rapid diagnosis of antibiotic-resistant bacteria

Henrietta Venter, Amornrat Aroonnual, Tavan Janvilisri, Puey Ounjai and Surang Chankhamhaengdecha

Essays in Biochemistry, 2017, 61, 91
DOI: 10.1042/EBC20160059

In-vitro blood–brain barrier modeling: A review of modern and fast-advancing technologies

Farzane Sivandzade and Luca Cucullo

J Cereb Blood Flow Metab, 2018, 38, 1667
DOI: 10.1177/0271678X18788769

3D Printing Technologies for Flexible Tactile Sensors toward Wearable Electronics and Electronic Skin

Changyong Liu, Ninggui Huang, Feng Xu, Junda Tong, Zhangwei Chen, Xuchun Gui, Yuelong Fu and Changshi Lao

Polymers, 2018, 10, 629
DOI: 10.3390/polym10060629

Maskless, rapid manufacturing of glass microfluidic devices using a picosecond pulsed laser

Krystian L. Wlodarczyk, Duncan P. Hand and M. Mercedes Maroto-Valer

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-56711-5

Type 1 Diabetes Mellitus reversal via implantation of magnetically purified microencapsulated pseudoislets

A. Espona-Noguera, J. Etxebarria-Elezgarai, L. Saenz del Burgo, A. Cañibano-Hernández, H. Gurruchaga, F.J. Blanco, G. Orive, Rosa M. Hernández, F. Benito-Lopez, J. Ciriza, L. Basabe-Desmonts and J.L. Pedraz

International Journal of Pharmaceutics, 2019, 560, 65
DOI: 10.1016/j.ijpharm.2019.01.058

Dedicated low-cost spectrophotometer to assist in cystic fibrosis diagnosis

Daniel Saverio Spozito, Francisco Ubaldo Vieira Junior and Eduardo Tavares Costa

Res. Biomed. Eng., 2021, 37, 329
DOI: 10.1007/s42600-021-00136-5

Towards a 3D-Printed Millifluidic Device for Investigating Cellular Processes

Jared A. Engelken, Tobias Butelmann, Fabian Tribukait-Riemenschneider and V. Prasad Shastri

Micromachines, 2024, 15, 1348
DOI: 10.3390/mi15111348

Manipulating fluid with vibrating 3D-printed paddles for applications in micropump

Zhiyong Tang, Xiufeng Shao, Jianze Huang, Jinyuan Yao and Guifu Ding

Nanotechnology and Precision Engineering, 2019, 2, 95
DOI: 10.1016/j.npe.2019.08.001

Microengineering the Liver: Strategies for Constructing Functional Liver‐on‐a‐Chip Devices

Jie Wang, Ziwei Liang, Jiapu Wang, Zongyi Li, Shaojie Wang, Yan Wei, Xin Xie and Di Huang

Exploration, 2026
DOI: 10.1002/exp2.70137

Aspects of 3D printed drugs

Debojit Bhattacharjee and Vivek Srivastava

Journal of Medical Engineering & Technology, 2020, 44, 472
DOI: 10.1080/03091902.2020.1822942

3D printing for chemical, pharmaceutical and biological applications

Andrew J. Capel, Rowan P. Rimington, Mark P. Lewis and Steven D. R. Christie

Nat Rev Chem, 2018, 2, 422
DOI: 10.1038/s41570-018-0058-y

Nanoadhesive Layer to Prevent Protein Absorption in a Poly(dimethylsiloxane) Microfluidic Device

Jae Bem You, Byungjin Lee, Yunho Choi, Chang-Soo Lee, Matthias Peter, Sung Gap Im and Sung Sik Lee

BioTechniques, 2020, 69, 46
DOI: 10.2144/btn-2020-0025

Direct fabrication of nanofiber scaffolds in pillar-based microfluidic device by using electrospinning and picosecond laser pulses

Tien-Li Chang, Chi-Huang Huang, Shih-Yen Chou, Shih-Feng Tseng and Ya-Wei Lee

Microelectronic Engineering, 2017, 177, 52
DOI: 10.1016/j.mee.2017.01.036

From microchannels to microphysiological systems: Development of application specific devices

James Yu, Jungeun Lim, MunSeok Choi, Minhwan Chung and Noo Li Jeon

Microelectronic Engineering, 2018, 202, 9
DOI: 10.1016/j.mee.2018.10.004

A novel fluorescent immunochromatographic strip combined with pocket fluorescence observation instrument for rapid detection of PRV

Haicong Shen, Hui Chen, Zhenzhu Cheng, Lei Ma, Liping Huang, Meng Xiao, Wei Xiao, Kaixin Xie and Yong Tang

Anal Bioanal Chem, 2018, 410, 7655
DOI: 10.1007/s00216-018-1379-x

Stereolithography 3D-Printed Catalytically Active Devices in Organic Synthesis

Sergio Rossi, Alessandra Puglisi, Laura Maria Raimondi and Maurizio Benaglia

Catalysts, 2020, 10, 109
DOI: 10.3390/catal10010109

Investigation on the scattering characteristics and unsupervised clustering of 3D printed samples

Mostafa Elsaadouny, Jan Barowski, Jochen Jebramcik and Ilona Rolfes

Int. J. Microw. Wireless Technol., 2020, 12, 862
DOI: 10.1017/S1759078720000823

High‐Performance Materials for 3D Printing in Chemical Synthesis Applications

Frederik Kotz, Patrick Risch, Dorothea Helmer and Bastian E. Rapp

Advanced Materials, 2019, 31
DOI: 10.1002/adma.201805982

Synthesis, Characterization, and Visible Light Curing Capacity of Polycaprolactone Acrylate

Jy-Jiunn Tzeng, Yi-Ting Hsiao, Yun-Ching Wu, Hsuan Chen, Shyh-Yuan Lee and Yuan-Min Lin

BioMed Research International, 2018, 2018, 1
DOI: 10.1155/2018/8719624

Biofunctionalization of Glass‐ and Paper‐Based Microfluidic Devices: A Review

Amid Shakeri, Noor Abu Jarad, Ashlyn Leung, Leyla Soleymani and Tohid F. Didar

Adv Materials Inter, 2019, 6
DOI: 10.1002/admi.201900940

Correlation between Critical Energy, Penetration Depth, and Photopolymerization Kinetics in Aluminum–Phosphate–Silicate Hybrid Materials for Vat Photopolymerization

Gabriel Toshiaki Tayama, Sandra Helena Messaddeq, Silvia Helena Santagneli and Younes Messaddeq

Macromolecules, 2023, 56, 3891
DOI: 10.1021/acs.macromol.3c00363

Microfluidics and organ-on-a-chip technologies: A systematic review of the methods used to mimic bone marrow

Gabriel Santos Rosalem, Libardo Andrés Gonzáles Torres, Estevam Barbosa de Las Casas, Fernando Augusto Siqueira Mathias, Jeronimo Conceição Ruiz, Maria Gabriela Reis Carvalho and Alessandro Polini

PLoS ONE, 2020, 15, e0243840
DOI: 10.1371/journal.pone.0243840

Sperm Syringe: 3D Sorting Platform for Assisted Reproduction

Farin Yazdan Parast, Moira K. O'Bryan and Reza Nosrati

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202101291

Recent Developments in SERS Microfluidic Chips: From Fundamentals to Biosensing Applications

Shuai Lian, Xiaoqiong Li and Xuefei Lv

ACS Appl. Mater. Interfaces, 2025, 17, 10193
DOI: 10.1021/acsami.4c17779

Recent Developments in 3D Printing of Droplet-Based Microfluidics

Adedamola D. Aladese and Heon-Ho Jeong

BioChip J, 2021, 15, 313
DOI: 10.1007/s13206-021-00032-1

Mikrofluidik aus dem 3D‐Drucker

Anthony K. Au, Wilson Huynh, Lisa F. Horowitz and Albert Folch

Angewandte Chemie, 2016, 128, 3926
DOI: 10.1002/ange.201504382

Harnessing Next‐Generation 3D Cancer Models to Elucidate Tumor‐Microbiome Crosstalk

Marina Green Buzhor, Giuseppe Longobardi, Or Kandli, Anne Krinsky, Opal Avramoff, Anshika Katyal, Koren Salomon, Adan Miari, Dana Venkert, Tania T. Barnatan, América García Alvarado, Shahar Greenberg and Ronit Satchi‐Fainaro

Adv Healthcare Materials, 2026, 15
DOI: 10.1002/adhm.202503198

New trends in potentiometric sensors: From design to clinical and biomedical applications

Manar M. Elhassan, Amr M. Mahmoud, Maha A. Hegazy, Shereen Mowaka and Jeffrey G. Bell

Talanta, 2025, 287, 127623
DOI: 10.1016/j.talanta.2025.127623

Applications of microfluidics in biosensing

Masindi Sekhwama, Kelvin Mpofu, Sudesh Sivarasu and Patience Mthunzi-Kufa

Discov Appl Sci, 2024, 6
DOI: 10.1007/s42452-024-05981-4

Human Ocular Angiogenesis‐Inspired Vascular Models on an Injection‐Molded Microfluidic Chip

Jihoon Ko, Younggyun Lee, Somin Lee, Seung‐Ryeol Lee and Noo Li Jeon

Adv Healthcare Materials, 2019, 8
DOI: 10.1002/adhm.201900328

Rapid Softlithography Using 3D‐Printed Molds

Sajad Razavi Bazaz, Navid Kashaninejad, Shohreh Azadi, Kamal Patel, Mohsen Asadnia, Dayong Jin and Majid Ebrahimi Warkiani

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201900425

3D-glass molds for facile production of complex droplet microfluidic chips

Miguel Tovar, Thomas Weber, Sundar Hengoju, Andrea Lovera, Anne-Sophie Munser, Oksana Shvydkiv and Martin Roth

Biomicrofluidics, 2018, 12
DOI: 10.1063/1.5013325

Microfluidic systems for modeling human development

Makenzie G. Bonner, Hemanth Gudapati, Xingrui Mou and Samira Musah

Development, 2022, 149
DOI: 10.1242/dev.199463

3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches

Henry H. Hwang, Wei Zhu, Grace Victorine, Natalie Lawrence and Shaochen Chen

Small Methods, 2018, 2
DOI: 10.1002/smtd.201700277

Inkjet‐Printed Planar Biochips for Interfacial Detection of Biomoleculars

Jianglin Diao, Ailing Ding, Yuqing Liu, Joselito M. Razal, Jun Chen, Zhisong Lu and Bin Wang

Adv Materials Inter, 2017, 4
DOI: 10.1002/admi.201700588

From CAD to microfluidic chip within one day: rapid prototyping of lab-on-chip cartridges using generic polymer parts

Daniel Podbiel, Lorenz Boecking, Hannah Bott, Julian Kassel, Daniel Czurratis, Franz Laermer, Roland Zengerle and Jochen Hoffmann

J. Micromech. Microeng., 2020, 30, 115012
DOI: 10.1088/1361-6439/aba5dd

Gut-on-a-Chip Research for Drug Development: Implications of Chip Design on Preclinical Oral Bioavailability or Intestinal Disease Studies

Joanne M. Donkers, Jamie I. van der Vaart and Evita van de Steeg

Biomimetics, 2023, 8, 226
DOI: 10.3390/biomimetics8020226

Emerging Droplet Microfluidics

Luoran Shang, Yao Cheng and Yuanjin Zhao

Chem. Rev., 2017, 117, 7964
DOI: 10.1021/acs.chemrev.6b00848

Replication of a Printed Volatile Mold: a novel microfabrication method for advanced microfluidic systems

Rémy Brossard, Thomas Brouchet and Florent Malloggi

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-53729-7

Atmospheric-Pressure Plasma Jet Processed Carbon-Based Electrochemical Sensor Integrated with a 3D-Printed Microfluidic Channel

Cheng-Han Yang, Chieh-Wen Chen, Yu-Kuan Lin, Yi-Chun Yeh, Cheng-Che Hsu, Yu-Jui Fan, Ing-Song Yu and Jian-Zhang Chen

J. Electrochem. Soc., 2017, 164, B534
DOI: 10.1149/2.0901712jes

3D-printed miniaturized fluidic tools in chemistry and biology

C.K. Dixit, K. Kadimisetty and J. Rusling

TrAC Trends in Analytical Chemistry, 2018, 106, 37
DOI: 10.1016/j.trac.2018.06.013

Biocompatible, Flexible, and Oxygen-Permeable Silicone-Hydrogel Material for Stereolithographic Printing of Microfluidic Lab-On-A-Chip and Cell-Culture Devices

Sabine Zips, Lukas Hiendlmeier, Lennart Jakob Konstantin Weiß, Heike Url, Tetsuhiko F. Teshima, Richard Schmid, Markus Eblenkamp, Petra Mela and Bernhard Wolfrum

ACS Appl. Polym. Mater., 2021, 3, 243
DOI: 10.1021/acsapm.0c01071

Characterization of immune cell migration using microfabrication

Doriane Vesperini, Galia Montalvo, Bin Qu and Franziska Lautenschläger

Biophys Rev, 2021, 13, 185
DOI: 10.1007/s12551-021-00787-9

3D printed microfluidic device with integrated optical sensing for particle analysis

S.M. Hampson, W. Rowe, S.D.R. Christie and M. Platt

Sensors and Actuators B: Chemical, 2018, 256, 1030
DOI: 10.1016/j.snb.2017.10.041

3D printed microchannels for sub-nL NMR spectroscopy

E. Montinaro, M. Grisi, M. C. Letizia, L. Pethö, M. A. M. Gijs, R. Guidetti, J. Michler, J. Brugger, G. Boero and David T. Eddington

PLoS ONE, 2018, 13, e0192780
DOI: 10.1371/journal.pone.0192780

Mimicking the Kidney: A Key Role in Organ-on-Chip Development

Roberto Paoli and Josep Samitier

Micromachines, 2016, 7, 126
DOI: 10.3390/mi7070126

Surface Characteristics of Machined Polystyrene with 3D Printed Thermoplastic Tool

Kamalpreet Sandhu, Gurminder Singh, Sunpreet Singh, Raman Kumar, Chander Prakash, Seeram Ramakrishna, Grzegorz Królczyk and Catalin I. Pruncu

Materials, 2020, 13, 2729
DOI: 10.3390/ma13122729

Electrophoresis on a polyester thread coupled with an end‐channel pencil electrode detector

Martin K. Kimani, John Mwangi and Edgar D. Goluch

Electrophoresis, 2021, 42, 1974
DOI: 10.1002/elps.202100108

High-speed micro-particle manipulation in a microfluidic chip by directional femtosecond laser impulse

Zhen-Yi Hong, Kazunori Okano, Dino Di Carlo, Yo Tanaka, Yaxiaer Yalikun and Yoichiroh Hosokawa

Sensors and Actuators A: Physical, 2019, 297, 111566
DOI: 10.1016/j.sna.2019.111566

Stereoselective Catalytic Synthesis of Active Pharmaceutical Ingredients in Homemade 3D‐Printed Mesoreactors

Sergio Rossi, Riccardo Porta, Davide Brenna, Alessandra Puglisi and Maurizio Benaglia

Angewandte Chemie, 2017, 129, 4354
DOI: 10.1002/ange.201612192

The Liberalization of Microfluidics: Form 2 Benchtop 3D Printing as an Affordable Alternative to Established Manufacturing Methods

Benjamin Heidt, Renato Rogosic, Silvio Bonni, Juliette Passariello-Jansen, David Dimech, Joseph W. Lowdon, Rocio Arreguin-Campos, Erik Steen Redeker, Kasper Eersels, Hanne Diliën, Bart van Grinsven and Thomas J. Cleij

Physica Status Solidi (a), 2020, 217
DOI: 10.1002/pssa.201900935

“Connecting worlds – a view on microfluidics for a wider application”

Ana C. Fernandes, Krist V. Gernaey and Ulrich Krühne

Biotechnology Advances, 2018, 36, 1341
DOI: 10.1016/j.biotechadv.2018.05.001

Impact of electrode design and voltage waveform on low-potential magnetohydrodynamic fluid actuation

Cael Warner, Cameron M. McDermid, Ali Ahmadi and Loïc Markley

Microfluid Nanofluid, 2019, 23
DOI: 10.1007/s10404-019-2264-4

Synthesis of nanoparticles via microfluidic devices and integrated applications

Fuqi Yao, Pengpeng Zhu, Junjie Chen, Suyang Li, Biao Sun, Yunfeng Li, Mingqiang Zou, Xiaohua Qi, Pei Liang and Qiang Chen

Microchim Acta, 2023, 190
DOI: 10.1007/s00604-023-05838-4

A novel microfluidic capture and monitoring method for assessing physiological damage of C. elegans under microgravity

Junsheng Wang, Jie Meng, Gege Ding, Yuejun Kang and Wenshuang Zhao

Electrophoresis, 2019, 40, 922
DOI: 10.1002/elps.201800461

3D printed droplet generation devices for serial femtosecond crystallography enabled by surface coating

Austin Echelmeier, Daihyun Kim, Jorvani Cruz Villarreal, Jesse Coe, Sebastian Quintana, Gerrit Brehm, Ana Egatz-Gomez, Reza Nazari, Raymond G. Sierra, Jason E. Koglin, Alexander Batyuk, Mark S. Hunter, Sébastien Boutet, Nadia Zatsepin, Richard A. Kirian, Thomas D. Grant, Petra Fromme and Alexandra Ros

J Appl Crystallogr, 2019, 52, 997
DOI: 10.1107/S1600576719010343

Bioimplant-on-a-Chip for Facile Investigation of Periodontal Ligament Formation on Biogenic Hydroxyapatite/Ti6Al4 V Implants

Sangbae Park, Jae Eun Kim, Juo Lee, Woochan Kim, Woobin Choi, Myung Chul Lee, Jae Woon Lim, Kyoung-Je Jang, Hoon Seonwoo, Jangho Kim and Jong Hoon Chung

ACS Appl. Mater. Interfaces, 2025, 17, 30673
DOI: 10.1021/acsami.5c04687

Seeing the Light: Advancing Materials Chemistry through Photopolymerization

Nathaniel Corrigan, Jonathan Yeow, Peter Judzewitsch, Jiangtao Xu and Cyrille Boyer

Angewandte Chemie, 2019, 131, 5224
DOI: 10.1002/ange.201805473

A compact and Ultra-sensitive microfiber based interferometer sensor for precise electrical current detection

Guoyu Li, Fei Xie, Yan Li, Hongtao Li, Rui Liu, Ao Wang and Lili Liang

Results in Optics, 2025, 18, 100788
DOI: 10.1016/j.rio.2025.100788

Recent developments in surface-enhanced Raman spectroscopy-based immuno (apta) assays for cardiac troponin detection: prospects for point-of-care applications

Sreejith K P, Murukeshan Vadakke Matham and Santhosh Chidangil

Biophys Rev, 2025
DOI: 10.1007/s12551-025-01381-z

Where are modern flow techniques heading to?

Burkhard Horstkotte, Manuel Miró and Petr Solich

Anal Bioanal Chem, 2018, 410, 6361
DOI: 10.1007/s00216-018-1285-2

An Alternative Micro-Milling Fabrication Process for Rapid and Low-Cost Microfluidics

Martin Christopher Allen, Simon Lookmire and Ebubekir Avci

Micromachines, 2024, 15, 905
DOI: 10.3390/mi15070905

Materials for Microfluidic Immunoassays: A Review

Lei Mou and Xingyu Jiang

Adv Healthcare Materials, 2017, 6
DOI: 10.1002/adhm.201601403

Liquid Crystalline Network Microstructures for Stimuli Responsive Labels with Multi‐Level Encryption

Simone Donato, Sara Nocentini, Daniele Martella, Srikanth Kolagatla, Diederik S. Wiersma, Camilla Parmeggiani, Colm Delaney and Larisa Florea

Small, 2024, 20
DOI: 10.1002/smll.202306802

Flexible Polytetrafluoroethylene (PTFE) Tube-Based Curved Serpentine Micromixer Guided by 3D-Printed Frames

Jeon-Woong Kang, In Seo Ji, Seul Ki Lee, Jung Min Lee and Jiwoo Hong

BioChip J, 2025, 19, 287
DOI: 10.1007/s13206-025-00200-7

3D printing biomimetic materials and structures for biomedical applications

Yizhen Zhu, Dylan Joralmon, Weitong Shan, Yiyu Chen, Jiahui Rong, Hanyu Zhao, Siqi Xiao and Xiangjia Li

Bio-des. Manuf., 2021, 4, 405
DOI: 10.1007/s42242-020-00117-0

Two-step fabrication of clear view SLA millifluidic device for long-term in-vitro cultures

Debasmita Saha, Rama Pandillapally, Vaibhav Dhyani, Kurre Sri Harsha, Sarpras Swain, Suhanya Duraiswamy and Lopamudra Giri

RPJ, 2025, 31, 316
DOI: 10.1108/RPJ-02-2024-0071

3D Printed Micro Free-Flow Electrophoresis Device

Sarah K. Anciaux, Matthew Geiger and Michael T. Bowser

Anal. Chem., 2016, 88, 7675
DOI: 10.1021/acs.analchem.6b01573

One-step three-dimensional printing of enzyme/substrate–incorporated devices for glucose testing

Cheng-Kuan Su and Jo-Chin Chen

Analytica Chimica Acta, 2018, 1036, 133
DOI: 10.1016/j.aca.2018.06.073

Recent advances of 3D printing in analytical chemistry: Focus on microfluidic, separation, and extraction devices

Lujun Wang and Martin Pumera

TrAC Trends in Analytical Chemistry, 2021, 135, 116151
DOI: 10.1016/j.trac.2020.116151

A 3D printed microfluidic perfusion device for multicellular spheroid cultures

Louis Jun Ye Ong, Anik Islam, Ramanuj DasGupta, Narayanan Gopalakkrishna Iyer, Hwa Liang Leo and Yi-Chin Toh

Biofabrication, 2017, 9, 045005
DOI: 10.1088/1758-5090/aa8858

Peroxidase-mimicking PtNP-coated, 3D-printed multi-well plate for rapid determination of glucose and lactate in clinical samples

Cheng-Kuan Su, Tzu-Wen Li and Yuh-Chang Sun

Sensors and Actuators B: Chemical, 2018, 269, 46
DOI: 10.1016/j.snb.2018.04.107

Emerging Anti-Fouling Methods: Towards Reusability of 3D-Printed Devices for Biomedical Applications

Eric Lepowsky and Savas Tasoglu

Micromachines, 2018, 9, 196
DOI: 10.3390/mi9040196

Ultra-precision direct diamond shaping of functional micro features

Nicholas Yew Jin Tan, Dennis Wee Keong Neo, Xinquan Zhang, Kui Liu and A. Senthil Kumar

Journal of Manufacturing Processes, 2021, 64, 209
DOI: 10.1016/j.jmapro.2020.12.064

3D Printed Microfluidic Spiral Separation Device for Continuous, Pulsation-Free and Controllable CHO Cell Retention

Anton Enders, John-Alexander Preuss and Janina Bahnemann

Micromachines, 2021, 12, 1060
DOI: 10.3390/mi12091060

Rapid Prototyping Using 3D Printing in Bioanalytical Research

Chengsen Zhang, Brandon J Bills and Nicholas E Manicke

Bioanalysis, 2017, 9, 329
DOI: 10.4155/bio-2016-0293

A portable microfluidic Aptamer-Tethered Enzyme Capture (APTEC) biosensor for malaria diagnosis

Lewis A. Fraser, Andrew B. Kinghorn, Roderick M. Dirkzwager, Shaolin Liang, Yee-Wai Cheung, Bryce Lim, Simon Chi-Chin Shiu, Marco S.L. Tang, Dean Andrew, Joseph Manitta, Jack S. Richards and Julian A. Tanner

Biosensors and Bioelectronics, 2018, 100, 591
DOI: 10.1016/j.bios.2017.10.001

Two‐Photon Direct Laser Writing of pNIPAM Actuators in Microchannels for Dynamic Microfluidics

Chantal Barwig, Annabelle Sonn, Tobias Spratte, Ankit Mishra, Eva Blasco, Christine Selhuber‐Unkel and Sadaf Pashapour

Advanced Intelligent Systems, 2024, 6
DOI: 10.1002/aisy.202300829

Preparation of chitosan-hyaluronic acid microcapsules and its dynamic release behavior analysis in a 3D-printed microchannel system: Exploration and verification

Xuening Fei, Dongchi Liang, Hongbin Zhao, Yanzi Yang, Mingyang Yin, Zhengkuan He, Zunfeng Liu and Xiaopeng Fan

International Journal of Biological Macromolecules, 2024, 273, 133031
DOI: 10.1016/j.ijbiomac.2024.133031

Enhancing the performance of porous silicon biosensors: the interplay of nanostructure design and microfluidic integration

Kayan Awawdeh, Marc A. Buttkewitz, Janina Bahnemann and Ester Segal

Microsyst Nanoeng, 2024, 10
DOI: 10.1038/s41378-024-00738-w

High Throughput Screening of 3D Printable Resins: Adjusting the Surface and Catalytic Properties of Multifunctional Architectures

J. Sebastián Manzano, Hsin Wang and Igor I. Slowing

ACS Appl. Polym. Mater., 2019, 1, 2890
DOI: 10.1021/acsapm.9b00598

Reusable, 3D-printed, peroxidase mimic–incorporating multi-well plate for high-throughput glucose determination

Cheng-Kuan Su and Jo-Chin Chen

Sensors and Actuators B: Chemical, 2017, 247, 641
DOI: 10.1016/j.snb.2017.03.054

Programmable three-dimensional advanced materials based on nanostructures as building blocks for flexible sensors

Zheng Lou, Lili Wang, Kai Jiang and Guozhen Shen

Nano Today, 2019, 26, 176
DOI: 10.1016/j.nantod.2019.03.002

Recent advances in multiple emulsions and their application as templates

Bruno F.B. Silva, Carlos Rodríguez-Abreu and Neus Vilanova

Current Opinion in Colloid & Interface Science, 2016, 25, 98
DOI: 10.1016/j.cocis.2016.07.006

Simple, Expendable, 3D-Printed Microfluidic Systems for Sample Preparation of Petroleum

Érica M. Kataoka, Rui C. Murer, Jandyson M. Santos, Rogério M. Carvalho, Marcos N. Eberlin, Fabio Augusto, Ronei J. Poppi, Angelo L. Gobbi and Leandro W. Hantao

Anal. Chem., 2017, 89, 3460
DOI: 10.1021/acs.analchem.6b04413

Emerging organoid models: leaping forward in cancer research

Han Fan, Utkan Demirci and Pu Chen

J Hematol Oncol, 2019, 12
DOI: 10.1186/s13045-019-0832-4

Rapid Customization of 3D Integrated Microfluidic Chips via Modular Structure-Based Design

Jingjiang Qiu, Qing Gao, Haiming Zhao, Jianzhong Fu and Yong He

ACS Biomater. Sci. Eng., 2017, 3, 2606
DOI: 10.1021/acsbiomaterials.7b00401

Methodology for Image-driven High-resolution Additive Manufacturing Using Discretized Data Set

Henry Oliver T. Ware, Wenzhong Liu, Jianmin Hu, Hao Zhang and Cheng Sun

Procedia CIRP, 2017, 65, 139
DOI: 10.1016/j.procir.2017.04.008

A modular 3D printed microfluidic system: a potential solution for continuous cell harvesting in large-scale bioprocessing

Lin Ding, Sajad Razavi Bazaz, Mahsa Asadniaye Fardjahromi, Flyn McKinnirey, Brian Saputro, Balarka Banerjee, Graham Vesey and Majid Ebrahimi Warkiani

Bioresour. Bioprocess., 2022, 9
DOI: 10.1186/s40643-022-00550-2

Current developments in modelling the tumour microenvironment in vitro: Incorporation of biochemical and physical gradients

Monieb A.M. Ahmed and Anika Nagelkerke

Organs-on-a-Chip, 2021, 3, 100012
DOI: 10.1016/j.ooc.2021.100012

Design and Fabrication of a 3D-Printed Microfluidic Immunoarray for Ultrasensitive Multiplexed Protein Detection

Keshani Hiniduma, Ketki S. Bhalerao, Peyahandi I. Thilini De Silva, Tianqi Chen and James F. Rusling

Micromachines, 2023, 14, 2187
DOI: 10.3390/mi14122187

Microfluidic technologies for anticancer drug studies

Karolina P. Valente, Sultan Khetani, Ahmad R. Kolahchi, Amir Sanati-Nezhad, Afzal Suleman and Mohsen Akbari

Drug Discovery Today, 2017, 22, 1654
DOI: 10.1016/j.drudis.2017.06.010

Inkjet 3D printed check microvalve

Rafał Walczak, Krzysztof Adamski and Danylo Lizanets

J. Micromech. Microeng., 2017, 27, 047002
DOI: 10.1088/1361-6439/aa6152

Hybrid organosilicon/polyol phantom for photoacoustic imaging

Fulvio Ratto, Lucia Cavigli, Claudia Borri, Sonia Centi, Giada Magni, Marina Mazzoni and Roberto Pini

Biomed. Opt. Express, 2019, 10, 3719
DOI: 10.1364/BOE.10.003719

Current and emerging trends in polymeric 3D printed microfluidic devices

Gustavo Gonzalez, Ignazio Roppolo, Candido Fabrizio Pirri and Annalisa Chiappone

Additive Manufacturing, 2022, 55, 102867
DOI: 10.1016/j.addma.2022.102867

3D-printed microfluidic and millifluidic devices for cell culture and mechanotransduction studies: A review

Jeromi G. López Santiago, Olga M. Rodríguez Martínez and Paul A. Sundaram

Journal of Micromanufacturing, 2024, 7, 216
DOI: 10.1177/25165984241286651

Direct Production of Microstructured Surfaces for Planar Chromatography Using 3D Printing

Niall P. Macdonald, Sinead A. Currivan, Laura Tedone and Brett Paull

Anal. Chem., 2017, 89, 2457
DOI: 10.1021/acs.analchem.6b04546

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta and Subha N. Rath

Bio-des. Manuf., 2021, 4, 311
DOI: 10.1007/s42242-020-00112-5

Freeform Membranes with Tunable Permeability in Microfluidics

Lukas T. Hirschwald, Sebastian Brosch, Georg Linz, John Linkhorst and Matthias Wessling

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202201857

Development of microreactors applied on biodiesel synthesis: From experimental investigation to numerical approaches

Harrson S. Santana, João L. Silva and Osvaldir P. Taranto

Journal of Industrial and Engineering Chemistry, 2019, 69, 1
DOI: 10.1016/j.jiec.2018.09.021

Hybrid Three Dimensionally Printed Paper-Based Microfluidic Platform for Investigating a Cell’s Apoptosis and Intracellular Cross-Talk

Ping Liu, Bowei Li, Longwen Fu, Yan Huang, Mingsan Man, Ji Qi, Xiyan Sun, Qi Kang, Dazhong Shen and Lingxin Chen

ACS Sens., 2020, 5, 464
DOI: 10.1021/acssensors.9b02205

Construction of liquid metal-based soft microfluidic sensors via soft lithography

Yang Zhang, Haowei Duan, Guoqiang Li, Maoyu Peng, Xing Ma, Ming Li and Sheng Yan

J Nanobiotechnol, 2022, 20
DOI: 10.1186/s12951-022-01471-0

3D Printed Biohybrid Microsystems

Victor Ya. Prinz and Konstantin B. Fritzler

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202101633

Review—Current Trends in Disposable Graphene-Based Printed Electrode for Electrochemical Biosensors

Mohanraj J., Durgalakshmi D. and Ajay Rakkesh R.

J. Electrochem. Soc., 2020, 167, 067523
DOI: 10.1149/1945-7111/ab818b

Femtosecond-Laser-Based 3D Printing for Tissue Engineering and Cell Biology Applications

Chee Meng Benjamin Ho, Abhinay Mishra, Kan Hu, Jianing An, Young-Jin Kim and Yong-Jin Yoon

ACS Biomater. Sci. Eng., 2017, 3, 2198
DOI: 10.1021/acsbiomaterials.7b00438

Blood-brain barrier models: Rationale for selection

Amira Sayed Hanafy, Dirk Dietrich, Gert Fricker and Alf Lamprecht

Advanced Drug Delivery Reviews, 2021, 176, 113859
DOI: 10.1016/j.addr.2021.113859

In-situ transfer vat photopolymerization for transparent microfluidic device fabrication

Yang Xu, Fangjie Qi, Huachao Mao, Songwei Li, Yizhen Zhu, Jingwen Gong, Lu Wang, Noah Malmstadt and Yong Chen

Nat Commun, 2022, 13
DOI: 10.1038/s41467-022-28579-z