Fabrication and effect on regulating vSMC phenotype of a biomimetic tunica media scaffold

Hong Shen, Xixue Hu, Haiyan Cui, Yaping Zhuang, Da Huang, Fei Yang, Xing Wang, Shenguo Wang and Decheng Wu

J. Mater. Chem. B, 2016, 4, 7689
DOI: 10.1039/C6TB02437H

Electrospinning nanofiber technology: a multifaceted paradigm in biomedical applications

Atul Garkal, Deepak Kulkarni, Shubham Musale, Tejal Mehta and Prabhanjan Giram

New J. Chem., 2021, 45, 21508
DOI: 10.1039/D1NJ04159B

Self-assembled gel tubes, filaments and 3D-printing within situmetal nanoparticle formation and enhanced stem cell growth

Carmen C. Piras, Alasdair G. Kay, Paul G. Genever, Juliette Fitremann and David K. Smith

Chem. Sci., 2022, 13, 1972
DOI: 10.1039/D1SC06062G

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

Xiangkui Ren, Yakai Feng, Jintang Guo, Haixia Wang, Qian Li, Jing Yang, Xuefang Hao, Juan Lv, Nan Ma and Wenzhong Li

Chem. Soc. Rev., 2015, 44, 5680
DOI: 10.1039/C4CS00483C

Dexamethasone loaded bilayered 3D tubular scaffold reduces restenosis at the anastomotic site of tracheal replacement: in vitro and in vivo assessments

Sang Jin Lee, Ji Suk Choi, Min Rye Eom, Ha Hyeon Jo, Il Keun Kwon, Seong Keun Kwon and Su A Park

Nanoscale, 2020, 12, 4846
DOI: 10.1039/C9NR10341D

Artificial small-diameter blood vessels: materials, fabrication, surface modification, mechanical properties, and bioactive functionalities

Dongfang Wang, Yiyang Xu, Qian Li and Lih-Sheng Turng

J. Mater. Chem. B, 2020, 8, 1801
DOI: 10.1039/C9TB01849B

Electrospun PCL-Based Vascular Grafts: In Vitro Tests

Barbara Zavan, Chiara Gardin, Vincenzo Guarino, Tiberio Rocca, Iriczalli Cruz Maya, Federica Zanotti, Letizia Ferroni, Giulia Brunello, Juan-Carlos Chachques, Luigi Ambrosio and Vincenzo Gasbarro

Nanomaterials, 2021, 11, 751
DOI: 10.3390/nano11030751

Hybrid Additive Microfabrication Scaffold Incorporated with Highly Aligned Nanofibers for Musculoskeletal Tissues

Dilshan Sooriyaarachchi, Hugo J. Minière, Shahrima Maharubin and George Z. Tan

Tissue Eng Regen Med, 2019, 16, 29
DOI: 10.1007/s13770-018-0169-z

Short Review of Polymer Composites for 3D Printing

Z H Zhu, N Zhang, T Wang and M Y Hao

IOP Conf. Ser.: Mater. Sci. Eng., 2020, 758, 012046
DOI: 10.1088/1757-899X/758/1/012046

In vitro spermatogenesis in artificial testis: current knowledge and clinical implications for male infertility

Zahra Bashiri, Mazaher Gholipourmalekabadi, Farnaz Khadivi, Maryam Salem, Azita Afzali, Tat-Chuan Cham and Morteza Koruji

Cell Tissue Res, 2023, 394, 393
DOI: 10.1007/s00441-023-03824-z

Optimization of Anti-kinking Designs for Vascular Grafts Based on Supramolecular Materials

Dan Jing Wu, Kim van Dongen, Wojciech Szymczyk, Paul J. Besseling, Ruth M. Cardinaels, Giulia Marchioli, Marcel H. P. van Genderen, Carlijn V. C. Bouten, Anthal I. P. M. Smits and Patricia Y. W. Dankers

Front. Mater., 2020, 7
DOI: 10.3389/fmats.2020.00220

Controllable four axis extrusion-based additive manufacturing system for the fabrication of tubular scaffolds with tailorable mechanical properties

Kenny A. van Kampen, Elena Olaret, Izabela-Cristina Stancu, Lorenzo Moroni and Carlos Mota

Materials Science and Engineering: C, 2021, 119, 111472
DOI: 10.1016/j.msec.2020.111472

Composite 3D printed scaffold with structured electrospun nanofibers promotes chondrocyte adhesion and infiltration

M. Rampichová, E. Košt'áková Kuželová, E. Filová, J. Chvojka, J. Šafka, M. Pelcl, J. Daňková, E. Prosecká, M. Buzgo, M. Plencner, D. Lukáš and E. Amler

Cell Adhesion & Migration, 2018, 12, 271
DOI: 10.1080/19336918.2017.1385713

Preliminary Application Research of 3D Bioprinting in Craniofacial Reconstruction

Yingjie Yan, Ziwei Zhang, Wenqing Han, Mengzhe Sun, Byeong Seop Kim, Yan Zhang, Haisong Xu, Dong Lei and Gang Chai

Journal of Craniofacial Surgery, 2023, 34, 805
DOI: 10.1097/SCS.0000000000009113

Immediately injectable modified gelatin and hyaluronic acid-based hydrogel encapsulating nano-hydroxyapatite and human adipose-derived MSCs for use as a bone filler in situ therapy

Sang Jin Lee, Han-Jun Kim, Eun Ji Choi, Hyosung Kim, Donghyun Lee, Sang-Hyun An, Sung Jun Min, Wan-Kyu Ko, Jae Seo Lee, Haram Nah, Jae Beum Bang, Min Heo, Dong Nyoung Heo, Sun Hee Do and Il Keun Kwon

Carbohydrate Polymer Technologies and Applications, 2024, 8, 100625
DOI: 10.1016/j.carpta.2024.100625

Biodegradable engineered fiber scaffolds fabricated by electrospinning for periodontal tissue regeneration

Xuanwen Xu, Shuangshuang Ren, Lu Li, Yi Zhou, Wenzao Peng and Yan Xu

J Biomater Appl, 2021, 36, 55
DOI: 10.1177/0885328220952250

Facile Preparation of β-Cyclodextrin-grafted Chitosan Electrospun Nanofibrous Scaffolds as a Hydrophobic Drug Delivery Vehicle for Tissue Engineering Applications

Sang Jin Lee, Haram Nah, Wan-Kyu Ko, Donghyun Lee, Ho-Jin Moon, Jae Seo Lee, Min Heo, Yu-Shik Hwang, Jae Beum Bang, Sang-Hyun An, Dong Nyoung Heo and Il Keun Kwon

ACS Omega, 2021, 6, 28307
DOI: 10.1021/acsomega.1c04481

Electrospun hybrid nanofibers: Fabrication, characterization, and biomedical applications

Banafshe Abadi, Nazanin Goshtasbi, Saman Bolourian, Jaleh Tahsili, Mahboubeh Adeli-Sardou and Hamid Forootanfar

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.986975

Vascular endothelial growth factor immobilized on mussel-inspired three-dimensional bilayered scaffold for artificial vascular graft application: In vitro and in vivo evaluations

Sang Jin Lee, Mi Eun Kim, Haram Nah, Ji Min Seok, Myung Ho Jeong, Kwangsung Park, Il Keun Kwon, Jun Sik Lee and Su A Park

Journal of Colloid and Interface Science, 2019, 537, 333
DOI: 10.1016/j.jcis.2018.11.039

3D Printing Applied to Tissue Engineered Vascular Grafts

Raphaël Wenger and Marie-Noëlle Giraud

Applied Sciences, 2018, 8, 2631
DOI: 10.3390/app8122631

Tranilast-loaded tubular scaffold and surgical suture for suppression of stenosis after tracheal prosthesis transplantation

Ji Suk Choi, Beom Kang Huh, Sang Jin Lee, Mi-Jung Han, Min Rye Eom, Hee-Jin Ahn, Young-Ju Jin, Su A Park, Young Bin Choy and Seong Keun Kwon

Journal of Industrial and Engineering Chemistry, 2020, 82, 81
DOI: 10.1016/j.jiec.2019.09.045

Exploring wastewater treatment potential through analytical 3D printed structures and pattern filming: a honeycomb biomimicry approach

S. K. Saha, N. Sakib, M. A. Jalil, T. Islam, Md. I. Hosen, M. M. Rahman and H. T. M. Q. Newaz

Int. J. Environ. Sci. Technol., 2025, 22, 12151
DOI: 10.1007/s13762-025-06538-7

3D bioprinting of vascular conduits for pediatric congenital heart repairs

Wenhan Lee, Yi Hong and Guohao Dai

Translational Research, 2019, 211, 35
DOI: 10.1016/j.trsl.2019.03.007

Bio-based polyesters based on 2,5-furandicarboxylic acid as 3D-printing materials: Design, preparation and performances

Yiting Geng, Zhao Wang, Xiaoran Hu, Yan Li, Qinan Zhang, Yujie Li, Runguo Wang and Liqun Zhang

European Polymer Journal, 2019, 114, 476
DOI: 10.1016/j.eurpolymj.2018.10.041

3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering

Arianna De Mori, Marta Peña Fernández, Gordon Blunn, Gianluca Tozzi and Marta Roldo

Polymers, 2018, 10, 285
DOI: 10.3390/polym10030285

Bioactivity and Thermal Stability of Collagen–Chitosan Containing Lemongrass Essential Oil for Potential Medical Applications

Maria Râpă, Traian Zaharescu, Laura Mihaela Stefan, Carmen Gaidău, Ioana Stănculescu, Rodica Roxana Constantinescu and Maria Stanca

Polymers, 2022, 14, 3884
DOI: 10.3390/polym14183884

Tissue-engineered Vascular Grafts: Balance of the Four Major Requirements

Jingxian Wu, Changming Hu, Zengchao Tang, Qian Yu, Xiaoli Liu and Hong Chen

Colloid and Interface Science Communications, 2018, 23, 34
DOI: 10.1016/j.colcom.2018.01.005

Transplantation of a 3D-printed tracheal graft combined with iPS cell-derived MSCs and chondrocytes

In Gul Kim, Su A. Park, Shin-Hyae Lee, Ji Suk Choi, Hana Cho, Sang Jin Lee, Yoo-Wook Kwon and Seong Keun Kwon

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-61405-4

Development of 3D Printed Electrospun Scaffolds for the Fabrication of Porous Scaffolds for Vascular Applications

Jahnvi Bansal, Katelyn Neuman, Vaughn K. Greene and David A. Rubenstein

3D Printing and Additive Manufacturing, 2022, 9, 380
DOI: 10.1089/3dp.2020.0337

Application of 3D Printing in Individualized Treatment of Intracranial Aneurysms

Sen Wang, Qing Huang, Jing Yuan, HongBing Zhang, Nan Yang and Zhicheng Pang

Annals of Indian Academy of Neurology, 2023, 26, 81
DOI: 10.4103/aian.aian_133_22

The role of polysaccharide-based biodegradable soft polymers in the healthcare sector

Zia Ullah Arif

Advanced Industrial and Engineering Polymer Research, 2025, 8, 132
DOI: 10.1016/j.aiepr.2024.05.001

Acellular Tissue-Engineered Vascular Grafts from Polymers: Methods, Achievements, Characterization, and Challenges

Xinyu Wang, Vincent Chan and Peter R. Corridon

Polymers, 2022, 14, 4825
DOI: 10.3390/polym14224825

Fabrication Process of Triple-Layer Small-Diameter Vascular Scaffold with Microchannel Structure in the Inner Layer for Accelerated Endothelialization

Qingxi Hu, Qi Wang, Suihong Liu, Ye Lu, Zhaoxiang Zeng, Jiaxuan Feng, Rui Feng and Haiguang Zhang

Fibers Polym, 2023, 24, 469
DOI: 10.1007/s12221-023-00094-y

Fabrication and characterization of 3D-printed bone-like β-tricalcium phosphate/polycaprolactone scaffolds for dental tissue engineering

-->JiSun Park, Sang Jin Lee, Ha Hyeon Jo, Jun Hee Lee, Wan Doo Kim, Jae Young Lee and Su A -->Park

Journal of Industrial and Engineering Chemistry, 2017, 46, 175
DOI: 10.1016/j.jiec.2016.10.028

Heparin coating on 3D printed poly (l-lactic acid) biodegradable cardiovascular stent via mild surface modification approach for coronary artery implantation

Sang Jin Lee, Ha Hyeon Jo, Kyung Seob Lim, Dohyung Lim, Soojin Lee, Jun Hee Lee, Wan Doo Kim, Myung Ho Jeong, Joong Yeon Lim, Il Keun Kwon, Youngmee Jung, Jun-Kyu Park and Su A Park

Chemical Engineering Journal, 2019, 378, 122116
DOI: 10.1016/j.cej.2019.122116

Recent Progress in Fabrication of Electrospun Nanofiber Membranes for Developing Physiological In Vitro Organ/Tissue Models

Dohui Kim, Jaeseung Youn, Jisang Lee, Hyeonji Kim and Dong Sung Kim

Macromolecular Bioscience, 2023, 23
DOI: 10.1002/mabi.202300244

Emerging Roles of Electrospun Nanofibers in Cancer Research

Shixuan Chen, Sunil Kumar Boda, Surinder K. Batra, Xiaoran Li and Jingwei Xie

Adv Healthcare Materials, 2018, 7
DOI: 10.1002/adhm.201701024

Three-dimensional bio-printing equipment technologies for tissue engineering and regenerative medicine

Sang Hyun Ahn, Junhee Lee, Su A. Park and Wan Doo Kim

Tissue Eng Regen Med, 2016, 13, 663
DOI: 10.1007/s13770-016-0148-1

3D printed mesh reinforcements enhance the mechanical properties of electrospun scaffolds

Nicholas W. Pensa, Andrew S. Curry, Paul P. Bonvallet, Nathan F. Bellis, Kayla M. Rettig, Michael S. Reddy, Alan W. Eberhardt and Susan L. Bellis

Biomater Res, 2019, 23
DOI: 10.1186/s40824-019-0171-0

Serial Analysis of Tracheal Restenosis After 3D-Printed Scaffold Implantation: Recruited Inflammatory Cells and Associated Tissue Changes

Hee-Jin Ahn, Roza Khalmuratova, Su A. Park, Eun-Jae Chung, Hyun-Woo Shin and Seong Keun Kwon

Tissue Eng Regen Med, 2017, 14, 631
DOI: 10.1007/s13770-017-0057-y

3D Printing Manufacturing of Lithium Batteries: Prospects and Challenges toward Practical Applications

Sida Huo, Li Sheng, Ben Su, Wendong Xue, Li Wang, Hong Xu and Xiangming He

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202310396

Template‐Assisted Electrospinning and 3D Printing of Multilayered Hierarchical Vascular Grafts

Moein Zarei, Marek J. Żwir, Beata Michalkiewicz, Jarosław Gorący and Miroslawa El Fray

J Biomed Mater Res, 2025, 113
DOI: 10.1002/jbm.b.35525

Vascular implants – new aspects for in situ tissue engineering

Cornelia Blume, Xenia Kraus, Sebastian Heene, Sebastian Loewner, Nils Stanislawski, Fabian Cholewa and Holger Blume

Engineering in Life Sciences, 2022, 22, 344
DOI: 10.1002/elsc.202100100

On 3D-Printed Sandwich Strips of PLA–PLA Nanofibers for One-Way Programming

Ranvijay Kumar and Rupinder Singh

Natl. Acad. Sci. Lett., 2023, 46, 517
DOI: 10.1007/s40009-023-01269-0

Incorporation of Controlled Release Systems Improves the Functionality of Biodegradable 3D Printed Cardiovascular Implants

Fatemeh Kabirian, Masoud Mozafari, Petra Mela and Ruth Heying

ACS Biomater. Sci. Eng., 2023, 9, 5953
DOI: 10.1021/acsbiomaterials.3c00559

Role of Polymers in 3D Printing Technology for Drug Delivery - An Overview

Ankit Jain, Kuldeep K. Bansal, Ankita Tiwari, Ari Rosling and Jessica M. Rosenholm

CPD, 2019, 24, 4979
DOI: 10.2174/1381612825666181226160040

Electrically conductive biopolymer-based hydrogels and fibrous materials fabricated using 3D printing and electrospinning for cardiac tissue engineering

Arnaud Kamdem Tamo, Ingo Doench, Kaveh Roshanbinfar, Alexandra Montembault, Anatoli Serghei, Felix B. Engel and Anayancy Osorio-Madrazo

Bioactive Materials, 2025, 51, 650
DOI: 10.1016/j.bioactmat.2025.05.014

The use of heparin chemistry to improve dental osteogenesis associated with implants

Sang Jin Lee, Min Soo Bae, Deok Won Lee, Dong Nyoung Heo, Donghyun Lee, Min Heo, Seoung-Jin Hong, Joohyoung Kim, Wan Doo Kim, Su A Park and Il Keun Kwon

Carbohydrate Polymers, 2017, 157, 1750
DOI: 10.1016/j.carbpol.2016.11.062

Nanofiber Aerogels: Recent Progress and Biomedical Applications

Syed Muntazir Andrabi, Navatha Shree Sharma, S. M. Shatil Shahriar and Jingwei Xie

ACS Appl. Mater. Interfaces, 2025, 17, 45323
DOI: 10.1021/acsami.5c09471

Preparation and characterization of polycaprolactone–polyethylene glycol methyl ether and polycaprolactone–chitosan electrospun mats potential for vascular tissue engineering

Tamanna Sultana, Jhaleh Amirian, Chanmi Park, Seung Jin Lee and Byong-Taek Lee

J Biomater Appl, 2017, 32, 648
DOI: 10.1177/0885328217733849

Additive Manufacturing in Fluid Process Engineering

Tim Femmer, Ina Flack and Matthias Wessling

Chemie Ingenieur Technik, 2016, 88, 535
DOI: 10.1002/cite.201500086

Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare

Zhaojun Jia, Xiaoxue Xu, Donghui Zhu and Yufeng Zheng

Progress in Materials Science, 2023, 134, 101072
DOI: 10.1016/j.pmatsci.2023.101072

Special Features of Polyester-Based Materials for Medical Applications

Raluca Nicoleta Darie-Niță, Maria Râpă and Stanisław Frąckowiak

Polymers, 2022, 14, 951
DOI: 10.3390/polym14050951

Combination of electrospinning with other techniques for the fabrication of 3D polymeric and composite nanofibrous scaffolds with improved cellular interactions

Silvestre Bongiovanni Abel, Florencia Montini Ballarin and Gustavo A Abraham

Nanotechnology, 2020, 31, 172002
DOI: 10.1088/1361-6528/ab6ab4

State of the Art of Small‐Diameter Vessel‐Polyurethane Substitutes

Jinge Li, Zhaobin Chen and Xiaoniu Yang

Macromolecular Bioscience, 2019, 19
DOI: 10.1002/mabi.201800482

3D bioprinting of emulating homeostasis regulation for regenerative medicine applications

Zhen Wang, Lei Xiang, Feng Lin, Yunkai Tang and Wenguo Cui

Journal of Controlled Release, 2023, 353, 147
DOI: 10.1016/j.jconrel.2022.11.035

Cardiovascular Bio-Engineering: Current State of the Art

Teresa Simon-Yarza, Isabelle Bataille and Didier Letourneur

J. of Cardiovasc. Trans. Res., 2017, 10, 180
DOI: 10.1007/s12265-017-9740-6

Electrospinning: An enabling nanotechnology platform for drug delivery and regenerative medicine

Shixuan Chen, Ruiquan Li, Xiaoran Li and Jingwei Xie

Advanced Drug Delivery Reviews, 2018, 132, 188
DOI: 10.1016/j.addr.2018.05.001

3D Electrospun Synthetic Extracellular Matrix for Tissue Regeneration

Yingchun Su, Mette Steen Toftdal, Alice Le Friec, Mingdong Dong, Xiaojun Han and Menglin Chen

Small Science, 2021, 1
DOI: 10.1002/smsc.202100003

Enhancing decellularized vascular scaffolds with PVDF and PCL reinforcement: a fused deposition modeling approach

Kirill Yu. Klyshnikov, Maria A. Rezvova, Nikita V. Belikov, Tatiana V. Glushkova and Evgeny A. Ovcharenko

Front. Cardiovasc. Med., 2023, 10
DOI: 10.3389/fcvm.2023.1257812

Advancements in the fabrication technologies and biomaterials for small diameter vascular grafts: A fine-tuning of physicochemical and biological properties

Mina Shahriari-Khalaji, Muhammad Shafiq, Haitao Cui, Ran Cao and Meifang Zhu

Applied Materials Today, 2023, 31, 101778
DOI: 10.1016/j.apmt.2023.101778

Tubular scaffold made by gelatin/polylactic acid nanofibers for breast ductal carcinoma in situ tumor modeling

Fatemeh Khatami, Aysan Baharian, Shiva Akbari-Birgani and Nasser Nikfarjam

Journal of Drug Delivery Science and Technology, 2023, 85, 104606
DOI: 10.1016/j.jddst.2023.104606

Vascularized skin tissue models featuring adipose cell spheroid-laden GelMA hydrogels

Dongjin Lee, Sangmin Lee, Jeongbok Lee, Dahong Kim, Hyunseok Kwon, Junhyoung Ahn, Hyungjun Lim, Jae Jong Lee, Heungsoo Shin and Su A Park

Materials Today Bio, 2025, 32, 101835
DOI: 10.1016/j.mtbio.2025.101835

In vitro and in vivo assessments of an optimal polyblend composition of polycaprolactone/gelatin nanofibrous scaffolds for Achilles tendon tissue engineering

Sang Jin Lee, Han-Jun Kim, Min Heo, Hye-Rim Lee, Eun-Ji Choi, Hyosung Kim, Donghyun Lee, Rui L. Reis, Sun Hee Do and Il Keun Kwon

Journal of Industrial and Engineering Chemistry, 2019, 76, 173
DOI: 10.1016/j.jiec.2019.03.036

A novel mussel-inspired 3D printed-scaffolds immobilized with bone forming peptide-1 for bone tissue engineering applications: Preparation, characterization and evaluation of its properties

Sang Jin Lee, Ha Hyeon Jo, Seong Keun Kwon, Jin Ho Lee, Wan Doo Kim, Jun Hee Lee, Il Keun Kwon and Su A. Park

Macromol. Res., 2016, 24, 305
DOI: 10.1007/s13233-016-4049-x

Combination of 3D Printing and Electrospinning Techniques for Biofabrication

Dan‐Lei Yang, Fazal Faraz, Jie‐Xin Wang and Norbert Radacsi

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202101309

Tissue-Engineered Esophagus via Bioreactor Cultivation for Circumferential Esophageal Reconstruction

In Gul Kim, Yanru Wu, Su A. Park, Hana Cho, Jun Jae Choi, Seong Keun Kwon, Jung-Woog Shin and Eun-Jae Chung

Tissue Engineering Part A, 2019, 25, 1478
DOI: 10.1089/ten.tea.2018.0277

Tubular Scaffold with Shape Recovery Effect for Cell Guide Applications

Kazi Hossain, Chenkai Zhu, Reda Felfel, Nusrat Sharmin and Ifty Ahmed

JFB, 2015, 6, 564
DOI: 10.3390/jfb6030564

Tissue engineered in-vitro vascular patch fabrication using hybrid 3D printing and electrospinning

Isabel Mayoral, Elisa Bevilacqua, Gorka Gómez, Abdelkrim Hmadcha, Ignacio González-Loscertales, Esther Reina, Julio Sotelo, Antonia Domínguez, Pedro Pérez-Alcántara, Younes Smani, Patricia González-Puertas, Ana Mendez, Sergio Uribe, Tarik Smani, Antonio Ordoñez and Israel Valverde

Materials Today Bio, 2022, 14, 100252
DOI: 10.1016/j.mtbio.2022.100252

3D Printing of Polysaccharide-Based Hydrogel Scaffolds for Tissue Engineering Applications: A Review

Arnaud Kamdem Tamo, Lesly Dasilva Wandji Djouonkep and Naomie Beolle Songwe Selabi

International Journal of Biological Macromolecules, 2024, 270, 132123
DOI: 10.1016/j.ijbiomac.2024.132123

Diversity of Electrospinning Approach for Vascular Implants: Multilayered Tubular Scaffolds

Emad Tolba

Regen. Eng. Transl. Med., 2020, 6, 383
DOI: 10.1007/s40883-020-00157-z

Application of polymeric nanofibers in medical designs, part II: Neural and cardiovascular tissues

Esmaeil Biazar

International Journal of Polymeric Materials and Polymeric Biomaterials, 2016, 65, 957
DOI: 10.1080/00914037.2016.1180619

Fabrication of 3D Printed PCL/PEG Polyblend Scaffold Using Rapid Prototyping System for Bone Tissue Engineering Application

Su A Park, Sang Jin Lee, Ji Min Seok, Jun Hee Lee, Wan Doo Kim and Il Keun Kwon

J Bionic Eng, 2018, 15, 435
DOI: 10.1007/s42235-018-0034-8

On 4D Printing of Thermoresponsive Innovative Orthosis for Tennis Elbow Treatment

Ranvijay Kumar, Rupinder Singh, Vinay Kumar and Nishant Ranjan

J. Inst. Eng. India Ser. C, 2026, 107, 681
DOI: 10.1007/s40032-026-01321-0

From 1D electrospun nanofibers to advanced multifunctional fibrous 3D aerogels

Mandana Dilamian, Majid Joghataei, Zahra Ashrafi, Christoph Bohr, Sanjay Mathur and Hajar Maleki

Applied Materials Today, 2021, 22, 100964
DOI: 10.1016/j.apmt.2021.100964

Biomimetic Architectures for Peripheral Nerve Repair: A Review of Biofabrication Strategies

Paul A. Wieringa, Ana Rita Gonçalves de Pinho, Silvestro Micera, Richard J. A. van Wezel and Lorenzo Moroni

Adv Healthcare Materials, 2018, 7
DOI: 10.1002/adhm.201701164

Physicochemical characterization of albumin immobilized on different TiO2 surfaces for use in implant materials

Erika S. Bronze-Uhle, Leonardo F.G. Dias, Luciana D. Trino, Adriana A. Matos, Rodrigo C. de Oliveira and Paulo N. Lisboa-Filho

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2019, 564, 39
DOI: 10.1016/j.colsurfa.2018.12.028

Integration of 3D Printing–Coelectrospinning: Concept Shifting in Biomedical Applications

Adrija Ghosh, Jonathan Tersur Orasugh, Suprakas Sinha Ray and Dipankar Chattopadhyay

ACS Omega, 2023, 8, 28002
DOI: 10.1021/acsomega.3c03920

Advanced Biomanufacturing Technologies for Micro-physiological Systems

Min Kyeong Kim, Jungbin Yoon, Dohui Kim, Jongmin Kim, Jae-Seok Kim, Gyugang Go, Junhyeok Song, Seunghun Son, Kyungdeok Park, Jooyoung Lee, Donghan Lee, Sumin Cho, Wonseok Choi, Jaehong Min, Young-Sam Cho, Seung-Jae Lee, Hee-Gyeong Yi, Andrew Choi, Seunggyu Jeon, Hyungseok Lee, Dongwhi Choi, Sungmin Han, Jihoon Ko, Dong-woo Cho, Dong Sung Kim, Jinah Jang and Hyun-Wook Kang

Int. J. Precis. Eng. Manuf., 2025, 26, 2411
DOI: 10.1007/s12541-025-01330-6

Towards Polycaprolactone-Based Scaffolds for Alveolar Bone Tissue Engineering: A Biomimetic Approach in a 3D Printing Technique

Krzysztof Stafin, Paweł Śliwa and Marek Piątkowski

IJMS, 2023, 24, 16180
DOI: 10.3390/ijms242216180

TGF-β1/BSA coating modulates multi-phasic scaffolds for osteochondral tissue regeneration

Farnaz Ghorbani, Behafarid Ghalandari, Rainer Detsch, Chaozong Liu and Aldo R. Boccaccini

Materials Today Bio, 2025, 32, 101879
DOI: 10.1016/j.mtbio.2025.101879

A novel gelatin/chitosan-based “sandwich” antibacterial nanofiber film loaded with perillaldehyde for the preservation of chilled chicken

Xinxia Wang, Zaitian Wang, Zhilan Sun, Daoying Wang and Fang Liu

Food Chemistry, 2025, 465, 142025
DOI: 10.1016/j.foodchem.2024.142025

3D‐Printed Biodegradable Polymeric Vascular Grafts

Anthony J. Melchiorri, Narutoshi Hibino, C. A. Best, T. Yi, Y. U. Lee, C. A. Kraynak, Lucas K. Kimerer, A. Krieger, P. Kim, Christopher K. Breuer and John P. Fisher

Adv Healthcare Materials, 2016, 5, 319
DOI: 10.1002/adhm.201500725

Design considerations for engineering 3D models to study vascular pathologies in vitro

Suzette T. Lust, Catherine M. Shanahan, Rebecca J. Shipley, Pablo Lamata and Eileen Gentleman

Acta Biomaterialia, 2021, 132, 114
DOI: 10.1016/j.actbio.2021.02.031

Fabrication and design of bioactive agent coated, highly-aligned electrospun matrices for nerve tissue engineering: Preparation, characterization and application

Sang Jin Lee, Min Heo, Donghyun Lee, Dong Nyoung Heo, Ho-Nam Lim and Il Keun Kwon

Applied Surface Science, 2017, 424, 359
DOI: 10.1016/j.apsusc.2017.02.179

A review on spacers and membranes: Conventional or hybrid additive manufacturing?

Jing Wee Koo, Jia Shin Ho, Jia An, Yi Zhang, Chee Kai Chua and Tzyy Haur Chong

Water Research, 2021, 188, 116497
DOI: 10.1016/j.watres.2020.116497

Novel Uses for Three-Dimensional Printing in Congenital Heart Disease

Tom Loke, Axel Krieger, Craig Sable and Laura Olivieri

Curr Pediatr Rep, 2016, 4, 28
DOI: 10.1007/s40124-016-0099-y

Development of a three-dimensionally printed scaffold grafted with bone forming peptide-1 for enhanced bone regeneration with in vitro and in vivo evaluations

Sang Jin Lee, Jong-Eun Won, Changhak Han, Xiang Yun Yin, Hyung Keun Kim, Haram Nah, Il Keun Kwon, Byoung-Hyun Min, Chul-Ho Kim, Yoo Seob Shin and Su A Park

Journal of Colloid and Interface Science, 2019, 539, 468
DOI: 10.1016/j.jcis.2018.12.097

Experimental investigation of esophageal reconstruction with electrospun polyurethane nanofiber and 3D printing polycaprolactone scaffolds using a rat model

Hanaro Park, In Gul Kim, Yanru Wu, Hana Cho, Jung‐Woog Shin, Su A Park and Eun‐Jae Chung

Head & Neck, 2021, 43, 833
DOI: 10.1002/hed.26540

Role of Biomaterials in Cardiac Repair and Regeneration: Therapeutic Intervention for Myocardial Infarction

Ubaid Tariq, Mahima Gupta, Subhajit Pathak, Ruchira Patil, Akanksha Dohare and Santosh K. Misra

ACS Biomater. Sci. Eng., 2022, 8, 3271
DOI: 10.1021/acsbiomaterials.2c00454

3D Printable Electrically Conductive Hydrogel Scaffolds for Biomedical Applications: A Review

Sandya Shiranthi Athukorala, Tuan Sang Tran, Rajkamal Balu, Vi Khanh Truong, James Chapman, Naba Kumar Dutta and Namita Roy Choudhury

Polymers, 2021, 13, 474
DOI: 10.3390/polym13030474

Most simple preparation of an inkjet printing of silver nanoparticles on fibrous membrane for water purification: Technological and commercial application

Sang Jin Lee, Dong Nyoung Heo, Min Heo, Mi Hee Noh, Donghyun Lee, Su A Park, Ji-Hoi Moon and Il Keun Kwon

Journal of Industrial and Engineering Chemistry, 2017, 46, 273
DOI: 10.1016/j.jiec.2016.10.039