Mg-based implants with a sandwiched composite coating simultaneously facilitate antibacterial and osteogenic properties

Han Wu, Mengjiao Yu, Shutao Zhang, Mingyu You, Ao Xiong, Boxuan Feng, Jialin Niu, Guangyin Yuan, Bing Yue and Jia Pei

J. Mater. Chem. B, 2024, 12, 2015
DOI: 10.1039/D3TB02744A

Influence of bicarbonate concentration on the conversion layer formation onto AZ31 magnesium alloy and its electrochemical corrosion behaviour in simulated body fluid

Arthanari Srinivasan, Kwang Seon Shin and Nallaiyan Rajendran

RSC Adv., 2016, 6, 49910
DOI: 10.1039/C6RA08478H

Applications of dynamic electrochemical impedance spectroscopy (DEIS) to evaluate protective coatings formed on AZ31 magnesium alloy

A. Srinivasan, Kwang Seon Shin and N. Rajendran

RSC Adv., 2015, 5, 29589
DOI: 10.1039/C4RA16967K

A DFT study of the adsorption of short peptides on Mg and Mg-based alloy surfaces

Zhe Fang, Jianfeng Wang, Shijie Zhu, Xiaofan Yang, Yu Jia, Qiang Sun and Shaokang Guan

Phys. Chem. Chem. Phys., 2018, 20, 3602
DOI: 10.1039/C7CP07431J

Corrosion behaviour of micro-arc oxidation coatings on Mg–2Sr prepared in poly(ethylene glycol)-incorporated electrolytes

Dandan Gao, Jinhe Dou, Cheng Hu, Huijun Yu and Chuanzhong Chen

RSC Adv., 2018, 8, 3846
DOI: 10.1039/C7RA12497J

Effects of zirconium and strontium on the biocorrosion of Mg–Zr–Sr alloys for biodegradable implant applications

Yunfei Ding, Yuncang Li, Jixing Lin and Cuie Wen

J. Mater. Chem. B, 2015, 3, 3714
DOI: 10.1039/C5TB00433K

Influence of chemical heterogeneity and microstructure on the corrosion resistance of biodegradable WE43 magnesium alloys

Hesham Mraied, Wenbo Wang and Wenjun Cai

J. Mater. Chem. B, 2019, 7, 6399
DOI: 10.1039/C9TB00388F

Recent research advances on corrosion mechanism and protection, and novel coating materials of magnesium alloys: a review

Liangyu Wei and Ziyuan Gao

RSC Adv., 2023, 13, 8427
DOI: 10.1039/D2RA07829E

In vitro evaluation of biodegradable magnesium alloys containing micro-alloying additions of strontium, with and without zinc

Jun-Lan Wang, Shayanti Mukherjee, David R. Nisbet, Nick Birbilis and Xiao-Bo Chen

J. Mater. Chem. B, 2015, 3, 8874
DOI: 10.1039/C5TB01516B

Natural polymer-based bioabsorbable conducting wires for implantable bioelectronic devices

Qianqian Niu, Xiangyu Huang, Shasha Lv, Xiang Yao, Suna Fan and Yaopeng Zhang

J. Mater. Chem. A, 2020, 8, 25323
DOI: 10.1039/D0TA09701B

Ultra low water adhesive metal surface for enhanced corrosion protection

Gang Wang, Zhixiang Zeng, Junjun Chen, Mengya Xu, Jingfang Zhu, Shuan Liu, Tianhui Ren and Qunji Xue

RSC Adv., 2016, 6, 40641
DOI: 10.1039/C6RA03875A

Preparation and characterization of a calcium–phosphate–silicon coating on a Mg–Zn–Ca alloy via two-step micro-arc oxidation

Jinhe Dou, Yang Chen, Yiming Chi, Huancai Li, Guochao Gu and Chuanzhong Chen

Phys. Chem. Chem. Phys., 2017, 19, 15110
DOI: 10.1039/C7CP02672B

In situ incorporation of heparin/bivalirudin into a phytic acid coating on biodegradable magnesium with improved anticorrosion and biocompatible properties

Yingqi Chen, Xuan Zhang, Sheng Zhao, Manfred F. Maitz, Wentai Zhang, Su Yang, Jinlong Mao, Nan Huang and Guojiang Wan

J. Mater. Chem. B, 2017, 5, 4162
DOI: 10.1039/C6TB03157A

Superhydrophobic, superamphiphobic and SLIPS materials as anti-corrosion and anti-biofouling barriers

Binbin Zhang and Weichen Xu

New J. Chem., 2021, 45, 15170
DOI: 10.1039/D1NJ03158A

Construction of cellulose–phosphor hybrid hydrogels and their application for bioimaging

Zhenggang Wang, Xiaoli Fan, Meng He, Zhiquan Chen, Yanfeng Wang, Qifa Ye, Hongjie Zhang and Lina Zhang

J. Mater. Chem. B, 2014, 2, 7559
DOI: 10.1039/C4TB01240B

Galvanic lithotrophy, a new path to fuel bioelectrochemical processes

Carlos Norberto Rodríguez Simón, Pablo Sebastian Bonanni and Juan Pablo Busalmen

Environ. Sci.: Water Res. Technol., 2024, 10, 1565
DOI: 10.1039/D4EW00186A

Electrochemical evaluation of AZ31 Mg alloy in corrosion protection of titanium silicon oxide from Earle's solution

M. Kalaiyarasan and N. Rajendran

New J. Chem., 2023, 47, 16444
DOI: 10.1039/D3NJ02172F

Harnessing superhydrophobic coatings for enhancing the surface corrosion resistance of magnesium alloys

Rong Gu, Jie Shen, Qing Hao, Jinghong Wang, Dan Li, Liang Hu and Hong Chen

J. Mater. Chem. B, 2021, 9, 9893
DOI: 10.1039/D1TB01974K

Design and characterization of β-tricalcium phosphate-based self-passivating coatings on magnesium alloys

Erdem Şahin, Roberta Ruggiero, Marco Tatullo, Francesco Paduano, Meltem Alp and Ahmed Şeref

J. Mater. Chem. B, 2024, 12, 11477
DOI: 10.1039/D4TB01214C

Multiphysics simulation and experimental investigation of HA and Zn-doped HA coatings on magnesium alloys for resorbable implant applications

Binod Barai, Keshava Boorgula, Howa Begam, Subhasish Sarkar, Ananya Barui, Sukumar Kundu, Buddhadeb Oraon and Tapendu Mandal

Materials Today Communications, 2025, 42, 111241
DOI: 10.1016/j.mtcomm.2024.111241

Enhanced corrosion behavior and SCC resistance of a cast Mg–0.4Zr alloy after hot extrusion

N. Pourhasan, M. Sabbaghian, F. Pishbin and R. Mahmudi

Journal of Materials Research and Technology, 2025, 39, 585
DOI: 10.1016/j.jmrt.2025.09.109

Nanocontainer-Enhanced Self-Healing for Corrosion-Resistant Ni Coating on Mg Alloy

Zhi-Hui Xie, Dan Li, Zakiya Skeete, Anju Sharma and Chuan-Jian Zhong

ACS Appl. Mater. Interfaces, 2017, 9, 36247
DOI: 10.1021/acsami.7b12036

Corrosion Behavior of Mg-Zn-RE Alloys (RE = Gd, Y, Nd)

Arun Kumar S, Rajesh K. R, Jithu Jayaraj, K. G. Raghu and A. Srinivasan

J. of Materi Eng and Perform, 2023, 32, 2840
DOI: 10.1007/s11665-022-07213-5

Influence of heat treatment and aging on microstructure and mechanical properties of Mg‐1.8Zn‐0.7Si‐0.4Ca alloy

M. Shaeri, K.K. Taheri, A.K. Taheri and M.H. Shaeri

Materialwissenschaft Werkst, 2019, 50, 187
DOI: 10.1002/mawe.201700224

More than the barrier effect: Biodegradable Mg-Ag alloy membranes for guided bone/tissue regeneration

Sihui Ouyang, Xiong Wu, Li Meng, Xuerui Jing, Liying Qiao, Jia She, Kai Zheng, Xianhua Chen and Fusheng Pan

Journal of Magnesium and Alloys, 2024, 12, 4454
DOI: 10.1016/j.jma.2024.03.022

Research Progress of Degradable Rare Earth Magnesium Alloys in Orthopedics

萌吕

ACM, 2022, 12, 8547
DOI: 10.12677/ACM.2022.1291234

Machine learning assisted classification and interpretation of EIS data with experimental demonstration for chemical conversion coatings on Mg alloys

Debasis Saran, Neelam Mishra, Sivaiah Bathula and Kisor Kumar Sahu

Electrochimica Acta, 2025, 527, 146231
DOI: 10.1016/j.electacta.2025.146231

Hot deformation behavior and extrusion temperature-dependent microstructure, texture and mechanical properties of Mg–1Mn alloy

Junyu Wang, Yuanzhu Long, Chengxue Yang, Jianguo Liu, Aitao Tang, Zhengwen Yu and Fusheng Pan

Journal of Materials Research and Technology, 2024, 30, 1662
DOI: 10.1016/j.jmrt.2024.03.190

Ab-initio studies of the structural, electronic, optical and magnetic properties of DyMg intermetallic compound

Meena Kumari and U.P. Verma

Journal of Magnesium and Alloys, 2017, 5, 454
DOI: 10.1016/j.jma.2017.10.001

In vitro study of the PLLA-Mg65Zn30Ca5 composites as potential biodegradable materials for bone implants

Taolei Wang, Chao Lin, Dan Batalu, Lu Zhang, Jingzhou Hu and Wei Lu

Journal of Magnesium and Alloys, 2021, 9, 2009
DOI: 10.1016/j.jma.2020.12.014

3D X-ray Tomography Analysis of Mg–Si–Zn Alloys for Biomedical Applications: Elucidating the Morphology of the MgZn Phase

Guilherme Lisboa de Gouveia, Eshan Ganju, Danusa Moura, Swapnil K. Morankar, José Eduardo Spinelli and Nikhilesh Chawla

Applied Sciences, 2024, 14, 8081
DOI: 10.3390/app14178081

Spectrophotometric analysis to monitor the corrosion behaviour of magnesium during immersion corrosion testing: A suitable alternative to pH measurement?

S. Shanmugam, T.S.N. Sankara Narayanan, P. Mohan Sathyaraj, K. Ravichandran and Min Ho Lee

Corrosion Science, 2014, 89, 338
DOI: 10.1016/j.corsci.2014.09.002

Microstructural and Corrosion Properties of Hydroxyapatite Containing PEO Coating Produced on AZ31 Mg Alloy

Luca Pezzato, Katya Brunelli, Stefano Diodati, Mirko Pigato, Massimiliano Bonesso and Manuele Dabalà

Materials, 2021, 14, 1531
DOI: 10.3390/ma14061531

Computational Design of Ductile Magnesium Alloy Anodes for Magnesium Batteries

Smobin Vincent, Jin Hyun Chang and Juan Maria Garcia Lastra

Batteries & Supercaps, 2021, 4, 522
DOI: 10.1002/batt.202000240

AZ61 and AZ61-La Alloys as Anodes for Mg-Air Battery

Yiping Wu, Zhifeng Wang, Yu Liu, Guofeng Li, Shaohui Xie, Hui Yu and Hanqing Xiong

J. of Materi Eng and Perform, 2019, 28, 2006
DOI: 10.1007/s11665-019-03985-5

A Review on Influence of Alloying Elements: Microstructures, Mechanical Properties, and Biocompatibility of Mg-Based Alloys for Biomedical Application

M. J. Deviprasad and Bhavana Rikhari

J Bio Tribo Corros, 2025, 11
DOI: 10.1007/s40735-025-01045-1

Magnesium-Based Temporary Implants: Potential, Current Status, Applications, and Challenges

Sankaranarayanan Seetharaman, Dhivya Sankaranarayanan and Manoj Gupta

JFB, 2023, 14, 324
DOI: 10.3390/jfb14060324

Microstructure and corrosion behavior of ALD Al2O3 film on AZ31 magnesium alloy with different surface roughness

Fumin Xu, Lan Luo, Lei Xiong and Yong Liu

Journal of Magnesium and Alloys, 2020, 8, 480
DOI: 10.1016/j.jma.2019.06.003

In Vitro Corrosion and Cytocompatibility of a Microarc Oxidation Coating and Poly(l-lactic acid) Composite Coating on Mg–1Li–1Ca Alloy for Orthopedic Implants

Rong-Chang Zeng, Lan-yue Cui, Ke Jiang, Rui Liu, Bao-Dong Zhao and Yu-Feng Zheng

ACS Appl. Mater. Interfaces, 2016, 8, 10014
DOI: 10.1021/acsami.6b00527

Designing High Corrosion Resistant Peritectic Magnesium Alloys via Sc and Y Addition

Pengyu Zhao, Tian Xie, Xinmei Xu, Hong Zhu, Fuyong Cao, Tao Ying and Xiaoqin Zeng

Metall Mater Trans A, 2020, 51, 2509
DOI: 10.1007/s11661-020-05693-5

Effect of Mn addition on corrosion properties of biodegradable Mg-4Zn-0.5Ca-xMn alloys

Dae Hyun Cho, Byoung Woo Lee, Jin Young Park, Kyung Mox Cho and Ik Min Park

Journal of Alloys and Compounds, 2017, 695, 1166
DOI: 10.1016/j.jallcom.2016.10.244

Optimization of anodizing conditions and hole sealing treatments for enhanced anti-corrosion properties of magnesium alloys

Yu-xin Kang, Zhan-lin Li, Shu-fang Yan, Wei-dong Chen and Chun-xia Guo

Ceramics International, 2024, 50, 25667
DOI: 10.1016/j.ceramint.2024.04.302

Review of Recent Developments in the Field of Magnesium Corrosion

Andrej Atrens, Guang‐Ling Song, Ming Liu, Zhiming Shi, Fuyong Cao and Matthew S. Dargusch

Adv Eng Mater, 2015, 17, 400
DOI: 10.1002/adem.201400434

Biodegradability and antibacterial properties of MAO coatings formed on Mg-Sr-Ca alloys in an electrolyte containing Ag doped hydroxyapatite

Mehmet Yazici, Ali Emre Gulec, Mevlut Gurbuz, Yucel Gencer and Mehmet Tarakci

Thin Solid Films, 2017, 644, 92
DOI: 10.1016/j.tsf.2017.10.033

Corrosion rate evolution of magnesium alloys in simulated body fluids: environment and alloying elements effects

Lorenzo Nani, Mattia Locatelli, Tommaso Persico, Sergio Lorenzi, Hüsnü Gerengi and Marina Cabrini

Corrosion Communications, 2026
DOI: 10.1016/j.corcom.2026.02.004

Biyolojik Olarak Parçalanabilen İmplant Üretiminde Magnezyum Alaşımlarının Mikro Frezelenmesinin Değerlendirilmesi

Musa Bilgin and Zekai Murat Kiliç

Journal of Polytechnic, 2026, 29, 1
DOI: 10.2339/politeknik.1466579

Electrochemical evaluation of AZ 31 magnesium alloy in two simulated biological solutions

Meghdad Yazdani, Abdollah Afshar, Namdar Mohammadi and Behrooz Paranj

ACMM, 2017, 64, 103
DOI: 10.1108/ACMM-02-2016-1649

Effect of minor content of Gd on the mechanical and degradable properties of as-cast Mg-2Zn-xGd-0.5Zr alloys

Junxiu Chen, Lili Tan, Xiaoming Yu and Ke Yang

Journal of Materials Science & Technology, 2019, 35, 503
DOI: 10.1016/j.jmst.2018.10.022

Maximizing the potential applications of plasma electrolytic oxidation coatings produced on Mg-based alloys in anti-corrosion, antibacterial, and photocatalytic targeting through harnessing the LDH/PEO dual structure

Elham Nikoomanzari and Arash Fattah-alhosseini

Journal of Magnesium and Alloys, 2024, 12, 2674
DOI: 10.1016/j.jma.2024.07.002

A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications

Jixing Lin, Xian Tong, Zimu Shi, Dechuang Zhang, Lishu Zhang, Kun Wang, Aiping Wei, Lufan Jin, Jianguo Lin, Yuncang Li and Cuie Wen

Acta Biomaterialia, 2020, 106, 410
DOI: 10.1016/j.actbio.2020.02.017

Advances in magnesium-based implants for biomedical applications: A comprehensive review and future perspectives

Juan Xie, Tingting Zhang, Jirui Jiang, Wen Xue, Wenhui Wang, Jiahua Ni, Xiaonong Zhang and Xuanyong Liu

Journal of Magnesium and Alloys, 2025, 13, 2978
DOI: 10.1016/j.jma.2025.05.009

Adsorption of arginine, glycine and aspartic acid on Mg and Mg-based alloy surfaces: A first-principles study

Zhe Fang, Jianfeng Wang, Xiaofan Yang, Qiang Sun, Yu Jia, Hairong Liu, Tingfei Xi and Shaokang Guan

Applied Surface Science, 2017, 409, 149
DOI: 10.1016/j.apsusc.2017.02.241

Electrochemical Investigation of the Galvanic Corrosion of AM60 and AD62 Magnesium Alloy in 0.1 M NaCl Solution

Magdalene Edet Ikpi, Junhua Dong and Wei Ke

International Journal of Electrochemical Science, 2015, 10, 552
DOI: 10.1016/S1452-3981(23)05013-7

Effect of High‐Energy Ball Milling on Mechanical Properties of the Mg–Nb Composites Fabricated through Powder Metallurgy Process

Alireza Vahid, Peter Hodgson and Yuncang Li

Adv Eng Mater, 2018, 20
DOI: 10.1002/adem.201700759

Effect of Al Addition on Microstructure and Tensile Properties of Mg-8Li-3Al Alloy

Zilong Zhao, Baoyu Duan, Jie Ying and Liang Li

JOM, 2021, 73, 2558
DOI: 10.1007/s11837-021-04738-3

Effect of microstructure and texture of AZ31 magnesium alloy substrate on nucleation and growth of biomimetic calcium phosphate coating

Hossein Aghamohammadi, Sayed Mahmood Rabiee, Seyed Jamal Hosseinipour and Roohollah Jamaati

Journal of Materials Research and Technology, 2023, 27, 5154
DOI: 10.1016/j.jmrt.2023.10.263

Correlation Between Microstructural Features and Corrosion Resistance in a Fine-Grained Severely Deformed Biodegradable Mg‒4Zn Alloy

M. Sabbaghian, R. Mahmudi and K. S. Shin

Met. Mater. Int., 2025, 31, 1025
DOI: 10.1007/s12540-024-01789-4

Additive Manufacturing of Biodegradable Metallic Implants by Selective Laser Melting: Current Research Status and Application Perspectives

Anna Gracheva, Igor Polozov and Anatoly Popovich

Metals, 2025, 15, 754
DOI: 10.3390/met15070754

In-vitro degradation behavior of hybrid epoxy-alkyl sol–gel/anodized composite coating on AZ31B Mg alloy

E. Merino, M. El Tawil, I. Sobrados, A. Durán and Y. Castro

J Sol-Gel Sci Technol, 2025, 114, 139
DOI: 10.1007/s10971-022-06012-7

Effect of immersion time on corrosion behavior of Mg-2Nd-0.5Zn-0.4Zr-1Y alloy in simulated body fluid

Dazhao Xu, Junguang He, Jiuba Wen and Huina Shi

Mater. Res. Express, 2019, 6, 125414
DOI: 10.1088/2053-1591/ab4b9d

Elucidating the role of microstructural modification on stress corrosion cracking of biodegradable Mg 4Zn alloy in simulated body fluid

Deepa B. Prabhu, Jayakrishnan Nampoothiri, V. Elakkiya, R. Narmadha, R. Selvakumar, R. Sivasubramanian, P. Gopalakrishnan and K.R. Ravi

Materials Science and Engineering: C, 2020, 106, 110164
DOI: 10.1016/j.msec.2019.110164

Effect of Addition of Silver and Chilled Casting on Corrosion Behavior of AZ91 Magnesium Alloy

M. Khorasanian, M. Yeganeh, N. Gholamzadeh and S. R. Alavi Zaree

Inter Metalcast, 2021, 15, 1184
DOI: 10.1007/s40962-020-00558-4

Microstructure and Corrosion Rate of the Hot Rolled Mg- 1.6Gd Alloys as Prospective Degradable Implant Materials

O Susanti and D Dwiputra

IOP Conf. Ser.: Mater. Sci. Eng., 2021, 1062, 012052
DOI: 10.1088/1757-899X/1062/1/012052

Research hotspots and trends of biodegradable magnesium and its alloys

Rui Zan, Sheng Shen, Yuanding Huang, Han Yu, Yaohui Liu, Shi Yang, Bohao Zheng, Zijun Gong, Wenhui Wang, Xiaonong Zhang, Tao Suo and Houbao Liu

Smart Materials in Medicine, 2023, 4, 468
DOI: 10.1016/j.smaim.2023.01.002

A multifunctional hybrid inorganic-organic coating fabricated on magnesium alloy surface with antiplatelet adhesion and antibacterial activities

Minting Du, Mengke Peng, Bingjie Mai, Fenyan Hu, Xiaodan Zhang, Yashao Chen and Changhao Wang

Surface and Coatings Technology, 2020, 384, 125336
DOI: 10.1016/j.surfcoat.2020.125336

Effect of pH fluctuations on the biodegradability of nanocomposite Mg-alloy in simulated bodily fluids

K. M. Zohdy, Rabab M. El-Sherif and A. M. El-Shamy

Chem. Pap., 2023, 77, 1317
DOI: 10.1007/s11696-022-02544-y

In vivo evaluation of a magnesium-based degradable intramedullary nailing system in a sheep model

Christina Rössig, Nina Angrisani, Patrick Helmecke, Silke Besdo, Jan-Marten Seitz, Bastian Welke, Nickolay Fedchenko, Heiko Kock and Janin Reifenrath

Acta Biomaterialia, 2015, 25, 369
DOI: 10.1016/j.actbio.2015.07.025

Recent advances using equal-channel angular pressing to improve the properties of biodegradable Mg‒Zn alloys

Mohammad Hashemi, Reza Alizadeh and Terence G. Langdon

Journal of Magnesium and Alloys, 2023, 11, 2260
DOI: 10.1016/j.jma.2023.07.009

Effects of Cu on the corrosion behavior and microstructure of Mg–Zn–Ca bulk metallic glass

Saifei Xu, Yong Hu, Wen Yang and Baosheng Liu

Materials & Corrosion, 2021, 72, 1547
DOI: 10.1002/maco.202112415

Mechanical properties of magnesium alloys for medical application: A review

Junxiu Chen, Lili Tan, Xiaoming Yu, Iniobong P. Etim, Muhammad Ibrahim and Ke Yang

Journal of the Mechanical Behavior of Biomedical Materials, 2018, 87, 68
DOI: 10.1016/j.jmbbm.2018.07.022

Effect of Rare Earth Elements (Y, La) on Microstructural Characterization and Corrosion Behavior of Ternary Mg-Y-La Alloys

Mohamed Ali Ibrahim Alwakwak, Ismail Esen, Hayrettin Ahlatcı and Esma Keskin

Materials, 2023, 16, 5141
DOI: 10.3390/ma16145141

Effect of Ca and rotation speed on microstructure and solidification parameters of AZ91 magnesium alloy produced by semi-solid casting through rotating container process

Saeed G. SHABESTARI and Ehsan GHANIABADI

Transactions of Nonferrous Metals Society of China, 2023, 33, 396
DOI: 10.1016/S1003-6326(22)66115-6

In vitro corrosion of Mg–1.21Li–1.12Ca–1Y alloy

Rongchang Zeng, Weichen Qi, Fen Zhang, Hongzhi Cui and Yufeng Zheng

Progress in Natural Science: Materials International, 2014, 24, 492
DOI: 10.1016/j.pnsc.2014.08.005

Magnesium-Based Nanocomposites: An Overview of Applications and Challenges

Neeraj Sharma, Gurpreet Singh, Rakesh Chandmal Sharma, Abhishek Sharma and Kapil Kumar Goyal

Powder Metall Met Ceram, 2022, 61, 205
DOI: 10.1007/s11106-022-00307-8

Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design

Yang Liu, Yufeng Zheng, Xie‐Hui Chen, Jian‐An Yang, Haobo Pan, Dafu Chen, Luning Wang, Jialiang Zhang, Donghui Zhu, Shuilin Wu, Kelvin Wai Kwok Yeung, Rong‐Chang Zeng, Yong Han and Shaokang Guan

Adv Funct Materials, 2019, 29
DOI: 10.1002/adfm.201805402

The current trends of Mg alloys in biomedical applications—A review

Usman Riaz, Ishraq Shabib and Waseem Haider

J Biomed Mater Res, 2019, 107, 1970
DOI: 10.1002/jbm.b.34290

Comparative study of the effect of Nd and Y content on the mechanical and biodegradable properties of Mg-Zn-Zr-xNd/Y (x=0.5, 1, 2) alloys

Junxiu Chen, Lili Tan, Iniobong P. Etim and Ke Yang

Materials Technology, 2018, 33, 659
DOI: 10.1080/10667857.2018.1492227

Magnesium-based nanocomposites: A review from mechanical, creep and fatigue properties

S. Abazari, A. Shamsipur, H.R. Bakhsheshi-Rad, J.W. Drelich, J. Goldman, S. Sharif, A.F. Ismail and M. Razzaghi

Journal of Magnesium and Alloys, 2023, 11, 2655
DOI: 10.1016/j.jma.2023.08.005

Influence of coating layers and immersion time on adhesion force and corrosion resistance of DCPD coatings on pure magnesium

Tina Sadat Hashemi, Mert Celikin, Helen O. McCarthy, Tanya J. Levingstone and Nicholas J. Dunne

Surfaces and Interfaces, 2025, 77, 107941
DOI: 10.1016/j.surfin.2025.107941

Effect of the Ca2Mg6Zn3 Phase on the Corrosion Behavior of Biodegradable Mg-4.0Zn-0.2Mn-xCa Alloys in Hank’s Solution

Junjian Fu, Wenbo Du, Ke Liu, Xian Du, Chenchen Zhao, Hongxing Liang, Adil Mansoor, Shubo Li and Zhaohui Wang

Materials, 2022, 15, 2079
DOI: 10.3390/ma15062079

Microstructural evolution, mechanical properties, and corrosion resistance of a heat-treated Mg alloy for the bio-medical application

Mohammad Janbozorgi, Kimia Karimi Taheri and Ali Karimi Taheri

Journal of Magnesium and Alloys, 2019, 7, 80
DOI: 10.1016/j.jma.2018.11.002

Controlled biodegradation of AZ31 alloy by chitosan/Fe-doped bioactive glass composite coating deposited via electrophoretic deposition for orthopaedic implants

Qadeer Ahmed, Khalil Ahmad, Aqsa Aizaz, Ehab El Sayed Massoud and Muhammad Atiq Ur Rehman

International Journal of Biological Macromolecules, 2025, 307, 141856
DOI: 10.1016/j.ijbiomac.2025.141856

In-vitro biomineralization and biocompatibility of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites

Yee-Hsien Ho, Kun Man, Sameehan S. Joshi, Mangesh V. Pantawane, Tso-Chang Wu, Yong Yang and Narendra B. Dahotre

Bioactive Materials, 2020, 5, 891
DOI: 10.1016/j.bioactmat.2020.06.009

Hard-phase intensification by SiO2 nanoparticles for dislocation-mediated Mg supersaturation and tunable corrosion in Fe–Mg alloys

Chongxian He, Guochao Wu, Wenjing Yang, Youwen Yang, Xiong Shuai and Cijun Shuai

Journal of Materials Research and Technology, 2026, 40, 849
DOI: 10.1016/j.jmrt.2025.12.170

Research progress on superhydrophobic surface corrosion prevention of magnesium alloys: A review

Jinkui Cao, Baoji Ma, Chaopeng Xu, Liangliang Li, Xiangyu Li and Xinbo Wang

Materials Today Communications, 2024, 41, 110962
DOI: 10.1016/j.mtcomm.2024.110962

The importance of the film structure during self-powered ibuprofen salicylate drug release from polypyrrole electrodeposited on AZ31 Mg

B. Alshammary, N. Casillas, R. B. Cook, J. Swingler, C. Ponce de León and F. C. Walsh

J Solid State Electrochem, 2016, 20, 3375
DOI: 10.1007/s10008-016-3288-2

Development of magnesium alloys for biomedical applications: structure, process to property relationship

L. Tan, J. Dong, J. Chen and K. Yang

Materials Technology, 2018, 33, 235
DOI: 10.1080/10667857.2017.1405890

Selective laser melting of magnesium alloys: Necessity, formability, performance, optimization and applications

Kun Li, Chen Ji, Shengwen Bai, Bin Jiang and Fusheng Pan

Journal of Materials Science & Technology, 2023, 154, 65
DOI: 10.1016/j.jmst.2022.12.053

Translational status of biomedical Mg devices in China

Yu Sun, Hongliu Wu, Wenhui Wang, Rui Zan, Hongzhou Peng, Shaoxiang Zhang and Xiaonong Zhang

Bioactive Materials, 2019, 4, 358
DOI: 10.1016/j.bioactmat.2019.11.001

Molybdenum – A biodegradable implant material for structural applications?

Christian Redlich, Peter Quadbeck, Michael Thieme and Bernd Kieback

Acta Biomaterialia, 2020, 104, 241
DOI: 10.1016/j.actbio.2019.12.031

Factors affecting biocompatibility and biodegradation of magnesium based alloys

Sunil Kumar and Puneet Katyal

Materials Today: Proceedings, 2022, 52, 1092
DOI: 10.1016/j.matpr.2021.10.499

Tissue responses after implantation of biodegradable Mg alloys evaluated by multimodality 3D micro‐bioimaging in vivo

Heike Helmholz, Olga Will, Tuula Penate‐Medina, Jana Humbert, Timo Damm, Berengere Luthringer‐Feyerabend, Regine Willumeit‐Römer, Claus‐Christian Glüer and Oula Penate‐Medina

J Biomedical Materials Res, 2021, 109, 1521
DOI: 10.1002/jbm.a.37148

Magnesium alloy composite coatings: In vitro study of cytotoxicity, adhesion, cellular structure and function

Natalya G. Plekhova, Polina A. Novikova, Ivan N. Chernenko, Aleksandra K. Stepanyugina, Olga V. Shevchenko, Valeria S. Marchenko, Andrey S. Gnedenkov, Sergey L. Sinebryukhov, Sergey V. Gnedenkov and Valentin B. Shumatov

Russ Open Med J, 2025, 14
DOI: 10.15275/rusomj.2025.0203

Thermal Plasma-Induced Surface Structuring of Mg-Alloy for Improvement of Mechanical Properties

Muhammad Shoaib, Rana Muhammad Ayub, Shazia Bashir and Mahreen Akram

J. of Materi Eng and Perform, 2026
DOI: 10.1007/s11665-025-13034-z

Influence of Crystallographic Texture on the Corrosion Product Morphology and Corrosion Rate of AZ31 Plate in Simulated Body Fluid

Hossein Aghamohammadi, Seyed Jamal Hosseinipour, Sayed Mahmood Rabiee and Roohollah Jamaati

J. of Materi Eng and Perform, 2020, 29, 3824
DOI: 10.1007/s11665-020-04902-x

Morphological studies on the development of chemical conversion coating on surface of Mg–4Zn alloy and its corrosion and bio mineralisation behaviour in simulated body fluid

Deepa B. Prabhu, P. Gopalakrishnan and K.R. Ravi

Journal of Alloys and Compounds, 2020, 812, 152146
DOI: 10.1016/j.jallcom.2019.152146

Effects of strontium-substitution in sputter deposited calcium phosphate coatings on the rate of corrosion of magnesium alloys

Jonathan G. Acheson, Stephen McKillop, Joanna Ward, Abhijit Roy, Zhigang Xu, Adrian R. Boyd, Patrick Lemoine, Prashant N. Kumta, Jagannathan Sankar and Brian J. Meenan

Surface and Coatings Technology, 2021, 421, 127446
DOI: 10.1016/j.surfcoat.2021.127446

Effects of annealing on mechanical properties and degradation behavior of biodegradable JDBM magnesium alloy wires

Yuan TIAN, Hong-wei MIAO, Jia-lin NIU, Hua HUANG, Bin KANG, Hui ZENG, Wen-jiang DING and Guang-yin YUAN

Transactions of Nonferrous Metals Society of China, 2021, 31, 2615
DOI: 10.1016/S1003-6326(21)65680-7

Improved biodegradable magnesium alloys through advanced solidification processing

M.S. Dargusch, N. Balasubramani, J. Venezuela, S. Johnston, G. Wang, C. Lau, M. Bermingham, D. Kent and D.H. StJohn

Scripta Materialia, 2020, 177, 234
DOI: 10.1016/j.scriptamat.2019.10.028

Effect of the second-step voltages on the structural and corrosion properties of silicon–calcium–phosphate (Si–CaP) coatings on Mg–Zn–Ca alloy

Jinhe Dou, Yupeng Zhao, Lu Lu, Guochao Gu, Huijun Yu and Chuanzhong Chen

R. Soc. open sci., 2018, 5, 172410
DOI: 10.1098/rsos.172410

Biocompatibility and Immune Response of a Newly Developed Volume-Stable Magnesium-Based Barrier Membrane in Combination with a PVD Coating for Guided Bone Regeneration (GBR)

Larissa Steigmann, Ole Jung, Wolfgang Kieferle, Sanja Stojanovic, Annica Proehl, Oliver Görke, Steffen Emmert, Stevo Najman, Mike Barbeck and Daniel Rothamel

Biomedicines, 2020, 8, 636
DOI: 10.3390/biomedicines8120636

Effects of ECAP Extrusion on the Microstructure, Mechanical Properties and Biodegradability of Mg–2Zn–xGd–0.5Zr Alloys

Jun-Xiu Chen, Xiang-Ying Zhu, Li-Li Tan, Ke Yang and Xu-Ping Su

Acta Metall. Sin. (Engl. Lett.), 2021, 34, 205
DOI: 10.1007/s40195-020-01136-7

Treatment of large bone defects in load-bearing bone: traditional and novel bone grafts

Dan Yu, Wenyi Shen, Jiahui Dai and Huiyong Zhu

J. Zhejiang Univ. Sci. B, 2025, 26, 421
DOI: 10.1631/jzus.B2300669

The inhibition behavior of novel ionic liquids for magnesium alloy in NaCl solution: Experimental and theoretical investigation

Xing Gao, Yaxu Wu, Qiushuo Huang, Yumiao Jiang, Danyang Ma and Tiegang Ren

Journal of Molecular Liquids, 2021, 324, 114732
DOI: 10.1016/j.molliq.2020.114732

Mechanical, corrosion, and biocompatibility properties of Mg-Zr-Sr-Sc alloys for biodegradable implant applications

Khurram Munir, Jixing Lin, Cuie Wen, Paul F.A. Wright and Yuncang Li

Acta Biomaterialia, 2020, 102, 493
DOI: 10.1016/j.actbio.2019.12.001

Investigation on the Controlled Degradation and Invitro Mineralization of Carbon Nanotube Reinforced AZ31 Nanocomposite in Simulated Body Fluid

A. Madhan Kumar, S. Fida Hassan, Ahmad A. Sorour, M. Paramsothy and M. Gupta

Met. Mater. Int., 2019, 25, 105
DOI: 10.1007/s12540-018-0161-0

A Comparative Study of As-Cast Alloys of ZW21 with Varied Element Additions, Investigating Dry and Corrosive Wear in Body Fluid

Kenza Djebari, Yunus Türen, Levent Elen and Hayrettin Ahlatçı

JOM, 2025, 77, 4344
DOI: 10.1007/s11837-025-07394-z

Self-Assembled Monolayers of Various Alkyl-Phosphonic Acids on Bioactive FHA Coating for Improving Surface Stability and Corrosion Resistance of Biodegradable AZ91D Mg Alloy

Chung-Wei Yang and Peng-Hsiu Li

Materials, 2025, 18, 4633
DOI: 10.3390/ma18194633

Effects of magnetic field on the microstructure and mechanical property of Mg-Al-Gd alloys

Qi Cai, Cong Zhai, Qun Luo, Tong-Yi Zhang and Qian Li

Materials Characterization, 2019, 154, 233
DOI: 10.1016/j.matchar.2019.06.011

Test conditions can significantly affect the results of in vitro cytotoxicity testing of degradable metallic biomaterials

Eva Jablonská, Jiří Kubásek, Dalibor Vojtěch, Tomáš Ruml and Jan Lipov

Sci Rep, 2021, 11
DOI: 10.1038/s41598-021-85019-6

In vitro evaluation of MgSr and MgCaSr alloys via direct culture with bone marrow derived mesenchymal stem cells

Wensen Jiang, Aaron F. Cipriano, Qiaomu Tian, Chaoxing Zhang, Marisa Lopez, Amy Sallee, Alan Lin, Mayra Celene Cortez Alcaraz, Yuanhao Wu, Yufeng Zheng and Huinan Liu

Acta Biomaterialia, 2018, 72, 407
DOI: 10.1016/j.actbio.2018.03.049

Recent advances on the development of magnesium alloys for biodegradable implants

Yongjun Chen, Zhigang Xu, Christopher Smith and Jag Sankar

Acta Biomaterialia, 2014, 10, 4561
DOI: 10.1016/j.actbio.2014.07.005

Electrochemical characteristics of bioresorbable binary MgCa alloys in Ringer's solution: Revealing the impact of local pH distributions during in-vitro dissolution

D. Mareci, G. Bolat, J. Izquierdo, C. Crimu, C. Munteanu, I. Antoniac and R.M. Souto

Materials Science and Engineering: C, 2016, 60, 402
DOI: 10.1016/j.msec.2015.11.069

The influence of yttrium and manganese additions on the degradation and biocompatibility of magnesium-zinc-based alloys: In vitro and in vivo studies

Lei Shi, Yang Yan, Chun-sheng Shao, Kun Yu, Bo Zhang and Liang-jian Chen

Journal of Magnesium and Alloys, 2024, 12, 608
DOI: 10.1016/j.jma.2022.06.010

New porous Mg composites for bone implants

Alireza Vahid, Peter Hodgson and Yuncang Li

Journal of Alloys and Compounds, 2017, 724, 176
DOI: 10.1016/j.jallcom.2017.07.004

Influence of Alloying Treatment and Rapid Solidification on the Degradation Behavior and Mechanical Properties of Mg

Jian Chen, Ping Wu, Qiyuan Wang, Youwen Yang, Shuping Peng, Yuanzhuo Zhou, Cijun Shuai and Youwen Deng

Metals, 2016, 6, 259
DOI: 10.3390/met6110259

Impact of non-isothermal aging heat treatment on the microstructure, mechanical properties, and corrosion behaviour of Mg-9Al-0.7Zn-0.8Ca alloy in simulated body fluid

Iman Harasani and Hamed Jamshidi Aval

Canadian Metallurgical Quarterly, 2025, 1
DOI: 10.1080/00084433.2025.2518352

Development of Zn-2Cu-xMn/Mg Alloys for Orthopedic Applications: Mechanical Performance to In Vitro Degradation under Different Physiological Environments

Debajyoti Palai, P. Siva Prasad, Bangmaya Satpathy, Siddhartha Das and Karabi Das

ACS Biomater. Sci. Eng., 2023, 9, 6058
DOI: 10.1021/acsbiomaterials.3c00641

Biodegradable Magnesium Alloys Developed as Bone Repair Materials: A Review

Chen Liu, Zheng Ren, Yongdong Xu, Song Pang, Xinbing Zhao and Ying Zhao

Scanning, 2018, 2018, 1
DOI: 10.1155/2018/9216314

Cytotoxic and Genotoxic Investigation of Nd and Ce Crossover in Cast EZ43 Magnesium Alloy Enriched Using Rare Elements

Özcan Büyükgenç, Bünyamin Çiçek, Levent Elen, Büşra Moran Moran, Hayrettin Ahlatçı and Yunus Türen

JBBBE, 2026, 71, 1
DOI: 10.4028/p-l0Puov

A review of effective strides in amelioration of the biocompatibility of PEO coatings on Mg alloys

Arash Fattah-alhosseini, Razieh Chaharmahali, Kazem Babaei, Meisam Nouri, Mohsen K. Keshavarz and Mosab Kaseem

Journal of Magnesium and Alloys, 2022, 10, 2354
DOI: 10.1016/j.jma.2022.09.002

In vitro investigation on microstructure, bio-corrosion properties and cytotoxicity of as-extruded Mg–5Sn–xIn alloys

Xuejian Wang, Yubo Zhang, Enyu Guo, Zongning Chen, Huijun Kang, Xueqin Liu, Pei Han and Tongmin Wang

Journal of Alloys and Compounds, 2021, 877, 160294
DOI: 10.1016/j.jallcom.2021.160294

Obtaining of light biocompatible magnesium alloys using levitation equipment under controlled argon atmosphere

V Geantă, I Voiculescu, H Kelemen and G Kelemen

IOP Conf. Ser.: Mater. Sci. Eng., 2018, 448, 012004
DOI: 10.1088/1757-899X/448/1/012004

Effect of diffusion in the model tissue on biocorrosion of Mg alloys

Manas Ranjan Sahu and Akiko Yamamoto

Colloids and Surfaces B: Biointerfaces, 2025, 251, 114621
DOI: 10.1016/j.colsurfb.2025.114621

Crystal structure and hydrogen storage properties of (La,Ce)Ni5−xMx (M = Al, Fe, or Co) alloys

Wan-liang Mi, Zhao-sen Liu, Toru Kimura, Atsunori Kamegawa and Hai-liang Wang

Int J Miner Metall Mater, 2019, 26, 108
DOI: 10.1007/s12613-019-1714-z

Preparation and characterization of porous zinc prepared by spark plasma sintering as a material for biodegradable scaffolds

Jaroslav Čapek, Eva Jablonská, Jan Lipov, Tomáš František Kubatík and Dalibor Vojtěch

Materials Chemistry and Physics, 2018, 203, 249
DOI: 10.1016/j.matchemphys.2017.10.008

Effect of Zn on corrosion behaviour of biodegradable Mg-Zn-Mn alloys evaluated by FE prediction and in-vitro testing

X.Z. Lu, L.C. Chan, X.J. Zou and C.P. Lai

J. Phys.: Conf. Ser., 2021, 1965, 012067
DOI: 10.1088/1742-6596/1965/1/012067

Overview of porous magnesium-based scaffolds: development, properties and biomedical applications

Amir Motaharinia, Jaroslaw W Drelich, Safian Sharif, Ahmad Fauzi Ismail, Farid Naeimi, Alexandra Glover, Mahshid Ebrahiminejad and Hamid Reza Bakhsheshi-Rad

Mater. Futures, 2025, 4, 012401
DOI: 10.1088/2752-5724/ad9493

Mechanical and corrosion properties of extruded Mg–Zr–Sr alloys for biodegradable implant applications

Faisal Kiani, Jixing Lin, Alireza Vahid, Khurram Munir, Cuie Wen and Yuncang Li

Materials Science and Engineering: A, 2022, 831, 142192
DOI: 10.1016/j.msea.2021.142192

In vitro and in vivo characterization of novel calcium phosphate and magnesium (CaP-Mg) bilayer coated titanium for implantation

Lanyue Chen, Xudong Yan, Lili Tan, Bowen Zheng, Fenik Kaml Muhammed, Ke Yang and Yi Liu

Surface and Coatings Technology, 2019, 374, 784
DOI: 10.1016/j.surfcoat.2019.06.023

Mg–Ca–Zn bio-degradable light alloys produced in a levitation induction melting furnace

Victor Geantă, Ionelia Voiculescu, Hajnal Kelemen, Doina Manu, Gabor Molnár and Gyorgy Kelemen

International Journal of Applied Electromagnetics and Mechanics, 2020, 63
DOI: 10.3233/JAE-209113

Electrochemical techniques for monitoring the biodegradability of nanocomposite Mg-alloy/HA for repairing bone fracture

Huimin Hu, Xiaodong Wang, Yansheng Huang, Zhao Yang, Bin Jia, Kai Sun, Dingjun Hao and Yunshan Guo

Journal of Materials Research and Technology, 2022, 18, 1669
DOI: 10.1016/j.jmrt.2022.03.040

Thermal stability, grain growth kinetics, mechanical properties, and bio-corrosion resistance of pure Mg, ZK30, and ZEK300 alloys: A comparative study

Zeinab Savaedi, Hamed Mirzadeh, Rouhollah Mehdinavaz Aghdam and Reza Mahmudi

Materials Today Communications, 2022, 33, 104825
DOI: 10.1016/j.mtcomm.2022.104825

Synergistic Improvement of Antibacterial and Osteogenic Differentiation of Thermomechanically Processed Mg–Zr–Sr-Ce Alloy: Insights into the Role of Precipitate Evolution Supported by AIMD Simulation Study

Satyabrata Nigamananda Sahoo, Santanu Mandal, Tapasendra Adhikary, Vaishak Kundudi Ramesh, Prasenjit Mukherjee, Shampa Aich, Indranil Samanta, Samit Kumar Nandi and Mangal Roy

ACS Appl. Bio Mater., 2024, 7, 2762
DOI: 10.1021/acsabm.3c01139

Effect of Mn Content on Microstructure, Mechanical Properties, and Corrosion Behavior of Mg-Zn-Gd-Y Alloy

Jiaqi Li, Chunting Liu, Zhenyin Wang, Yuxiang Cai and Jingyuan Li

J. of Materi Eng and Perform, 2024, 33, 10574
DOI: 10.1007/s11665-023-08695-7

In vitro assays and development strategies for magnesium-based biodegradable cardiovascular stent: A decade of review

Jiaqi Xu, Jiawei Zou, Dianyi Zhang, Kaili Zhang, Yining Qi, Changwen Yan, Eui-Seok Lee, Qi Jia, Chen Ma and Heng Bo Jiang

Progress in Materials Science, 2026, 156, 101541
DOI: 10.1016/j.pmatsci.2025.101541

Atomic layer deposited ZrO2 nanofilm on Mg-Sr alloy for enhanced corrosion resistance and biocompatibility

Qiuyue Yang, Wei Yuan, Xiangmei Liu, Yufeng Zheng, Zhenduo Cui, Xianjin Yang, Haobo Pan and Shuilin Wu

Acta Biomaterialia, 2017, 58, 515
DOI: 10.1016/j.actbio.2017.06.015

The Effect of Zn in as-Cast Mg-Zn Alloys for Biodegradable Materials

Asep Ridwan Setiawan, Al Azhary Putera Satria, Arif Basuki and Untung Ari Wibowo

IOP Conf. Ser.: Mater. Sci. Eng., 2019, 553, 012005
DOI: 10.1088/1757-899X/553/1/012005

In vitro biodegradation behavior of biodegradable hydroxyapatite coated AZ31 alloy treated at various pH values

Le Hanh, Le Van Hai, Nguyen The Hoang, Do Thi Hong Hanh, Le Minh Hai and Nguyen Viet Nam

Journal of Applied Biomaterials & Functional Materials, 2021, 19
DOI: 10.1177/22808000211010037

Study on hybrization of Tb3+-doped CaAl layered double hydroxides and tryptophan

Yufeng Chen, Kunlei Zhang, Yao Bao and Xiaoqing Wang

Res Chem Intermed, 2017, 43, 4907
DOI: 10.1007/s11164-017-2920-9

The effect of PEO parameters on the properties of biodegradable Mg alloys: a review

Mehdi Esmaeili, Mehran Tadayonsaidi and Babak Ghorbanian

Surface Innovations, 2021, 9, 184
DOI: 10.1680/jsuin.20.00057

Development of the electrochemical performance of zinc via alloying with indium as anode for alkaline batteries application

Mahmoud Elrouby, Hoda A. El –Shafy Shilkamy and A. Elsayed

Journal of Alloys and Compounds, 2021, 854, 157285
DOI: 10.1016/j.jallcom.2020.157285

Shear testing and failure modelling of calcium phosphate coated AZ31 magnesium alloys for orthopaedic applications

J.G. Acheson, E.A. Gallagher, J. Ward, S. McKillop, B. FitzGibbon, A.R. Boyd, B.J. Meenan, P. Lemoine and J.P. McGarry

Surface and Coatings Technology, 2022, 429, 127944
DOI: 10.1016/j.surfcoat.2021.127944

Biodegradable magnesium‐based biomaterials: An overview of challenges and opportunities

Shukufe Amukarimi and Masoud Mozafari

MedComm, 2021, 2, 123
DOI: 10.1002/mco2.59

Organic conversion coatings for magnesium and its alloys

Viswanathan S. Saji

Journal of Industrial and Engineering Chemistry, 2019, 75, 20
DOI: 10.1016/j.jiec.2019.03.018

Evaluation of the Microstructure, Mechanical Properties, Corrosion Resistance, and Cytocompatibility of Stir-Cast Ca- and Zn-Modified WE43 Nanocomposites for Biodegradable Orthopedic Implants

Abdul Rahman, Md Murtuja Husain and Naresh Prasad

Journal of Alloys and Compounds, 2025, 1037, 182336
DOI: 10.1016/j.jallcom.2025.182336

Corrosion Activity of Ultrafine-Grained Pure Magnesium and ZK60 Magnesium Alloy in Phosphate Buffered Saline Solution

Stella Diederichs, Dayan Nugmanov, Yulia Ivanisenko and Eberhard Kerscher

Materials, 2024, 17, 2726
DOI: 10.3390/ma17112726

Microstructure, Mechanical Property and Corrosion Behavior of Cold-Sprayed Zn Coatings on Mg Alloy Substrate

Zhi-Bin Luo, Xiao-Zhen Hu, Yi-Ting Xie, Shi-Wen Ouyang, Tai-Yang Wang, Shi-Bin Li, Hai-Long Yao, Hong-Tao Wang, Xiao-Bo Bai, Yun-Hua Feng, Fang Wang and Chao Yang

J Therm Spray Tech, 2023, 32, 2478
DOI: 10.1007/s11666-023-01642-x

Investigation on microstructure, mechanical, biocorrosion and biocompatibility behavior of nano-sized TiO2@Al2O3 reinforced Mg-HAp composites

Vivek Verma, Joy Saha, Abhishek Gautam and Kaushik Pal

Journal of Alloys and Compounds, 2022, 910, 164866
DOI: 10.1016/j.jallcom.2022.164866

Biodegradation of Mg-14Li alloy in simulated body fluid: A proof-of-concept study

Xiao-Bo Chen, Chuanqiang Li and Daokui Xu

Bioactive Materials, 2018, 3, 110
DOI: 10.1016/j.bioactmat.2017.08.002

Microstructure and discharge performance of Mg–6Al and Mg–6Al-0.5Er alloys

Hanqing Xiong, Zhifeng Wang, Linling Ye, Xiaozhen Wang, TianQi Chen and Hui Yu

Materials Chemistry and Physics, 2022, 280, 125822
DOI: 10.1016/j.matchemphys.2022.125822

Metallic implant biomaterials

Qizhi Chen and George A. Thouas

Materials Science and Engineering: R: Reports, 2015, 87, 1
DOI: 10.1016/j.mser.2014.10.001

Heat treatment of Hexa-Methylene Diamine Tetra-Methylene Phosphonic Acid (HMDTMPA) coating on biodegradable Mg to improve corrosion resistance and bioactivity

Hanaa Soliman, Abdel Salam Makhlouf and Guojiang Wan

Surface Engineering, 2021, 37, 1032
DOI: 10.1080/02670844.2021.1906000

Lanthanide salts in sustainable corrosion protection: Chemistry, progress, mechanism, challenges and opportunities

T. Sangtam, Chandrabhan Verma, A. Aier, L. Letro, T.N. Hellen, L. Longkumer, V. Venuh, V. Rutsa, A.K. Yimchunger, Ambrish Singh and Akram Alfantazi

Coordination Chemistry Reviews, 2025, 545, 217013
DOI: 10.1016/j.ccr.2025.217013

Deposition and corrosion performance of phosphate-polylactic acid composite coatings on WE43 magnesium alloy

Andrei V. Paspelau, Aliaksandr A. Kasach, Jacek Gurgul, Grzegorz Mordarski, Konrad Skowron, Irina I. Kurilo and Dzmitry S. Kharytonau

Surface and Coatings Technology, 2024, 478, 130419
DOI: 10.1016/j.surfcoat.2024.130419

Current advancements of hybrid coating on Mg alloys for medical applications

Hazera Khatun, Mostafizur Rahman, Saifullah Mahmud, Md Osman Ali and Mahfuza Akter

Results in Engineering, 2023, 18, 101162
DOI: 10.1016/j.rineng.2023.101162

Corrosion behavior of Mg-Zn-Zr-RE alloys under physiological environment – Impact on mechanical integrity and biocompatibility

Marwa AbdelGawad, Chaudhry A. Usman, Vasanth C. Shunmugasamy, Ibrahim Karaman and Bilal Mansoor

Journal of Magnesium and Alloys, 2022, 10, 1542
DOI: 10.1016/j.jma.2021.11.025

Modification of PEO coatings on AZ31 magnesium alloy via TiO2-enriched electrolyte and PLA polymer sealing

Ľuboš Halimovič, Daniel Kajánek, Filip Pastorek, Eva Nogová, František Lukáč, Leoš Doskočil and Branislav Hadzima

Journal of Materials Research and Technology, 2026, 41, 6107
DOI: 10.1016/j.jmrt.2026.02.165

Recent advances on the development of biodegradable magnesium alloys: a review

Junxiu Chen, Lili Tan and Ke Yang

Materials Technology, 2016, 31, 681
DOI: 10.1080/10667857.2016.1212587

In Vitro Degradation Behavior and Biocompatibility of Bioresorbable Molybdenum

Christian Redlich, Antje Schauer, Jakob Scheibler, Georg Poehle, Peggy Barthel, Anita Maennel, Volker Adams, Thomas Weissgaerber, Axel Linke and Peter Quadbeck

Metals, 2021, 11, 761
DOI: 10.3390/met11050761

Coatings for biodegradable magnesium-based supports for therapy of vascular disease: A general view

Mónica Echeverry-Rendon, Jean Paul Allain, Sara M. Robledo, Felix Echeverria and Martin C. Harmsen

Materials Science and Engineering: C, 2019, 102, 150
DOI: 10.1016/j.msec.2019.04.032

Synergistic effects of Sn addition and friction stirring on microstructure and performance of ZE41 mg alloy

Suhail Ahmed Manroo, B. Ratna Sunil, Vinayak Malik, Noor Zaman Khan and Babar Ahmad

emergent mater., 2025, 8, 3191
DOI: 10.1007/s42247-024-00980-y

Enhanced mechanical and thermal shock performance by oxygen competition in plasma sprayed coating

Shuai Zhang, Zhiqiang Li, Fei Li, Rui Xu, Gaotian Yin, Hui Li, Nana Zhao, Shufeng Liu, Fei Lu, Liqing Wang and Song Ma

Materials Research Bulletin, 2025, 189, 113450
DOI: 10.1016/j.materresbull.2025.113450

Morphological, microstructural, mechanical, and electrochemical optimization of a novel Mg–2Ca–1Mn–1 Sr alloy by P ion implantation for orthopedic implants

Mazhar H. Asdi, M.Umar Aslam Khan, Ahsan Shafique, Javed Hussain, Shazia Bashir, Saifullah Awan and Saqlain A. Shah

Materials Today Communications, 2023, 37, 107039
DOI: 10.1016/j.mtcomm.2023.107039

Analysis of Vascular Inflammation against Bioresorbable Zn–Ag-Based Alloys

Alexander A. Oliver, Roger J. Guillory, Katie L. Flom, Lea M. Morath, Timothy M. Kolesar, Ehsan Mostaed, Malgorzata Sikora-Jasinska, Jaroslaw W. Drelich and Jeremy Goldman

ACS Appl. Bio Mater., 2020, 3, 6779
DOI: 10.1021/acsabm.0c00740

Impressive strides in amelioration of corrosion and wear behaviors of Mg alloys using applied polymer coatings on PEO porous coatings: A review

Arash Fattah-alhosseini, Razieh Chaharmahali and Kazem Babaei

Journal of Magnesium and Alloys, 2022, 10, 1171
DOI: 10.1016/j.jma.2022.01.015

Advances in the Study of Magnesium Alloys and Their Use in Bone Implant Material

Peixuan Zhi, Leixin Liu, Jinke Chang, Chaozong Liu, Qiliang Zhang, Jian Zhou, Ziyu Liu and Yubo Fan

Metals, 2022, 12, 1500
DOI: 10.3390/met12091500

Degradation behavior and osseointegration of Mg–Zn–Ca screws in different bone regions of growing sheep: a pilot study

Romy Marek, Hanna Ćwieka, Nicholas Donohue, Patrick Holweg, Julian Moosmann, Felix Beckmann, Iva Brcic, Uwe Yacine Schwarze, Kamila Iskhakova, Marwa Chaabane, Sandra Sefa, Berit Zeller-Plumhoff, Annelie-Martina Weinberg, Regine Willumeit-Römer and Nicole Gabriele Sommer

Regenerative Biomaterials, 2023, 10
DOI: 10.1093/rb/rbac077

Influence of Laser Ablation Treatment on Electrochemical Characteristics of AZ80 Magnesium Alloy

Daniel Kajánek, Luboš Halimovič, Martina Jacková, Leoš Doskočil, Ingrid Zuziaková and Branislav Hadzima

Komunikácie, 2025, 27, B198
DOI: 10.26552/com.C.2025.039

Fluorescence enhancement of Tb3+-doped CaAl-LDH by cytosine

Yufeng Chen, Jiwang Zhang, Xiaoqing Wang and Li Wang

Journal of Luminescence, 2018, 204, 42
DOI: 10.1016/j.jlumin.2018.07.035

Porous Magnesium and Its Application

Prog. Phys. Met., 2022, 23
DOI: 10.15407/ufm.23.04.756

Comparative Study on Dry and Bio-Corrosive Wear Behavior of Mg-xAl-3Zn Alloys (x = 0.5-1-2-3 wt.%)

Erkan Koç, Alper Incesu and Amir N. Saud

J. of Materi Eng and Perform, 2022, 31, 613
DOI: 10.1007/s11665-021-06144-x

Microstructure and Corrosion Behavior of Thermal-Sprayed Hydroxyapatite/Magnesium Composite Coating on the Surface of AZ91D Magnesium Alloy

Hai-Long Yao, Xiao-Zhen Hu, Hong-Tao Wang, Qing-Yu Chen, Xiao-Bo Bai, Meng-Xian Zhang and Gang-Chang Ji

J Therm Spray Tech, 2019, 28, 495
DOI: 10.1007/s11666-018-0815-y

Development of magnesium implants by application of conjoint‐based quality function deployment

Sarah Siefen and Michael Höck

J Biomedical Materials Res, 2019, 107, 2814
DOI: 10.1002/jbm.a.36784

Mechanical properties, in vitro corrosion and biocompatibility of newly developed biodegradable Mg-Zr-Sr-Ho alloys for biomedical applications

Yunfei Ding, Jixing Lin, Cuie Wen, Dongmei Zhang and Yuncang Li

Sci Rep, 2016, 6
DOI: 10.1038/srep31990

Role of CeO2 doping on tribological behavior of Al2O3 coated AZ91 alloy

Sanjeet Kumar and Deepak Kumar

Surface and Coatings Technology, 2018, 349, 462
DOI: 10.1016/j.surfcoat.2018.06.025

Multiscale metal-based nanocomposites for bone and joint disease therapies

Yuwen Wang, Hasnain Jan, Zheng Zhong, Liangbin Zhou, Kexin Teng, Ye Chen, Jiankun Xu, Denghui Xie, Dexin Chen, Jiake Xu, Ling Qin, Rocky S. Tuan and Zhong Alan Li

Materials Today Bio, 2025, 32, 101773
DOI: 10.1016/j.mtbio.2025.101773

Rare-Earth based magnesium alloys as a potential biomaterial for the future

Abhishek Kumar, Amit Choudhari, Ashish Kumar Gupta and Avinash Kumar

Journal of Magnesium and Alloys, 2024, 12, 3841
DOI: 10.1016/j.jma.2024.10.006

XRD investigation of biodegradable magnesium rare earth alloy

J.R. Deepak, T. Arunkumar, Sasi Venkata Sree Datta Ravipati and S.S.S.K. Sumanth Varma

Materials Today: Proceedings, 2021, 47, 4676
DOI: 10.1016/j.matpr.2021.05.542

Electrochemical behaviour of sputter-coated titanium films on AZ31 magnesium alloy

Sundeep Kumar Marndi, Raman Pachaiappan, Amirthapandian Sankarakumar and Paramasivam Thangadurai

Surface Engineering, 2024, 40, 346
DOI: 10.1177/02670844241240387

Microstructure Evolution and Corrosion Resistance of As-Extruded AZ91–Ca Alloy During Friction Stir Back Extrusion

Maryam Mehdipour and Hamed Jamshidi Aval

Metallogr. Microstruct. Anal., 2025, 14, 189
DOI: 10.1007/s13632-024-01152-4

Antimicrobial Bioresorbable Mg–Zn–Ca Alloy for Bone Repair in a Comparison Study with Mg–Zn–Sr Alloy and Pure Mg

Chaoxing Zhang, Jiajia Lin, Nhu-Y Thi Nguyen, Yuxing Guo, Changlu Xu, Catherine Seo, Edgar Villafana, Hector Jimenez, Yang Chai, Renguo Guan and Huinan Liu

ACS Biomater. Sci. Eng., 2020, 6, 517
DOI: 10.1021/acsbiomaterials.9b00903

A review of the physiological impact of rare earth elements and their uses in biomedical Mg alloys

Weijie Weng, Arne Biesiekierski, Yuncang Li, Matthew Dargusch and Cuie Wen

Acta Biomaterialia, 2021, 130, 80
DOI: 10.1016/j.actbio.2021.06.004

Effect of heat treatment on mechanical and biodegradable properties of an extruded ZK60 alloy

Junxiu Chen, Lili Tan and Ke Yang

Bioactive Materials, 2017, 2, 19
DOI: 10.1016/j.bioactmat.2016.12.002

Study on structure and fluorescence of Tb-doped CaAl LDHs prepared in ethanol/water system

Yufeng Chen, Xiaoqing Wang, Yao Bao and Weinan Wu

J Sol-Gel Sci Technol, 2017, 81, 413
DOI: 10.1007/s10971-016-4216-8

Effects of Solution and Aging Treatment on the Mechanical Properties and Corrosion Behavior of a Biomedical ZK60 Magnesium Alloy After Multi-directional Compression

Dongsong Yin, Yuting Zhou, Yong Mao, Youyou Zhang, Zhiyuan Liu and Tianming Han

J. of Materi Eng and Perform, 2026, 35, 3119
DOI: 10.1007/s11665-025-11864-5

Biocompatible Magnesium Implant Double-Coated with Dexamethasone-Loaded Black Phosphorus and Poly(lactide-co-glycolide)

Jung Ho Lee, Seung Mi Baek, Gibum Lee, Seong-jong Kim, Hyoung Seop Kim and Sei Kwang Hahn

ACS Appl. Bio Mater., 2020, 3, 8879
DOI: 10.1021/acsabm.0c01179

Multisine impedimetric monitoring with an in-depth distribution of relaxation times analysis of WE43 and AZ31 magnesium alloys corrosion

Maria A. Osipenko, Jakub Karczewski, Michał Dominów, Marta Prześniak-Welenc, Iryna V. Makarava, Irina Kurilo, Dzmitry S. Kharytonau and Jacek Ryl

Measurement, 2023, 222, 113683
DOI: 10.1016/j.measurement.2023.113683

Carbon Nanotubes and Graphene as Nanoreinforcements in Metallic Biomaterials: a Review

Khurram S. Munir, Cuie Wen and Yuncang Li

Adv. Biosys., 2019, 3
DOI: 10.1002/adbi.201800212

Structural, mechanical and electronic properties of precipitates in Mg−Zn alloys

Tian-zhi ZHANG, Yang-zhen LIU, Qing-yun FU, Bai-song GUO, Wei-hong JIN and Zhen-tao YU

Transactions of Nonferrous Metals Society of China, 2024, 34, 2507
DOI: 10.1016/S1003-6326(24)66556-8

A review on magnesium alloys for biomedical applications

Ting Zhang, Wen Wang, Jia Liu, Liqiang Wang, Yujin Tang and Kuaishe Wang

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.953344

Stress corrosion cracking of biodegradable Mg-4Zn alloy in simulated body fluid at different strain rates – A fractographic investigation

Deepa B. Prabhu, S. Dhamotharan, G. Sathishkumar, P. Gopalakrishnan and K.R. Ravi

Materials Science and Engineering: A, 2018, 730, 223
DOI: 10.1016/j.msea.2018.06.002

Impressive strides in amelioration of corrosion behavior of Mg-based alloys through the PEO process combined with surface laser process: A review

Arash Fattah-alhosseini and Razieh Chaharmahali

Journal of Magnesium and Alloys, 2023, 11, 4390
DOI: 10.1016/j.jma.2023.10.005

Correlation Between Microstructure, Mechanical Properties, and Corrosion Characteristics of AZ31 Mg Alloy Processed by Accumulative Roll Bonding Process

Sepehr Samiei, Ghasem Dini and Mehdi Ebrahimian-Hosseinabadi

Met. Mater. Int., 2023, 29, 192
DOI: 10.1007/s12540-022-01202-y

Mg-Zn-Ca amorphous alloys for application as temporary implant: Effect of Zn content on the mechanical and corrosion properties

T.B. Matias, V. Roche, R.P. Nogueira, G.H. Asato, C.S. Kiminami, C. Bolfarini, W.J. Botta and A.M. Jorge

Materials & Design, 2016, 110, 188
DOI: 10.1016/j.matdes.2016.07.148

Effect of heat treatment on microstructure, mechanical, corrosion and biocompatibility of Mg-Zn-Zr-Gd-Nd alloy

Anuradha Jana, Mitun Das and Vamsi Krishna Balla

Journal of Alloys and Compounds, 2020, 821, 153462
DOI: 10.1016/j.jallcom.2019.153462

Different Effects of Calcium and Zinc as a Solute Element on the Fatigue Properties in Simulated Body Fluids of Magnesium Alloys

Naoko Ikeo, Taichi Uemura, Akihito Taguma and Toshiji Mukai

Mater. Trans., 2021, 62, 1806
DOI: 10.2320/matertrans.MT-M2021180

Corrosion resistance and biodegradability of micro-arc oxidation coatings with the variable sodium fluoride concentration on ZM21 magnesium alloys

Jing Wang, Jinhe Dou, Zhongchao Wang, Cheng Hu, Jiurong Liu, Huijun Yu and Chuanzhong Chen

Journal of Alloys and Compounds, 2023, 962, 171172
DOI: 10.1016/j.jallcom.2023.171172

The Effect of Solidification Rate on the Microstructure and Mechanical Properties of Pure Magnesium

Murtatha M. Jamel, Hugo Lopez, Benjamin Schultz and Wilkistar Otieno

Metals, 2021, 11, 1264
DOI: 10.3390/met11081264

Effects of Mg–Zn–Y quasicrystal addition on the microstructures, mechanical performances and corrosion behaviors of as-cast AM60 magnesium alloy

Peng Jia, Ming Wu, Jinyang Zhang, Xun Hu, Xinying Teng, Degang Zhao, Tao Wei, Dehua Dong, Qing Liu and Yi Wang

Mater. Res. Express, 2018, 5, 106512
DOI: 10.1088/2053-1591/aada70

Clinical translation and challenges of biodegradable magnesium-based interference screws in ACL reconstruction

Ying Luo, Chao Zhang, Jue Wang, Fangfei Liu, Kelvin Wingho Chau, Ling Qin and Jiali Wang

Bioactive Materials, 2021, 6, 3231
DOI: 10.1016/j.bioactmat.2021.02.032

Enhancing structural integrity of magnesium with hydroxyapatite and tantalum reinforcement

Tewodros Semeneh Ayalewu, Aschale Getnet Alemu and Hailemariam Mulugeta Wassie

Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-91912-1

Fabrication and characterization of superelastic Ti–Nb alloy enhanced with antimicrobial Cu via spark plasma sintering for biomedical applications

Yuanhuai He, Yuqin Zhang, Yehua Jiang and Rong Zhou

J. Mater. Res., 2017, 32, 2510
DOI: 10.1557/jmr.2017.191

In Vitro Degradation Behavior of Ti-Microalloyed AZ31 Magnesium Alloy in Simulated Body Fluid

S. Candan, S. Emir and E. Candan

J. of Materi Eng and Perform, 2022, 31, 1
DOI: 10.1007/s11665-021-06142-z

Grey relational analysis based multiresponse optimization for WEDM of ZE41A magnesium alloy

Rajender Kumar, Puneet Katyal and Shiwani Mandhania

International Journal of Lightweight Materials and Manufacture, 2022, 5, 543
DOI: 10.1016/j.ijlmm.2022.06.003

Effects of Mg17Sr2 Phase on the Bio‐Corrosion Behavior of Mg–Zr–Sr Alloys

Yunfei Ding, Yuncang Li and Cuie Wen

Adv Eng Mater, 2016, 18, 259
DOI: 10.1002/adem.201500222

Structure and mechanical characterization of Mg-Nd-Zn alloys prepared by different processes

D Dvorský, J Kubásek, D Vojtěch, I Voňavková, M Veselý and M Čavojský

IOP Conf. Ser.: Mater. Sci. Eng., 2017, 179, 012018
DOI: 10.1088/1757-899X/179/1/012018

Effect of the addition of low rare earth elements (lanthanum, neodymium, cerium) on the biodegradation and biocompatibility of magnesium

Elmar Willbold, Xuenan Gu, Devon Albert, Katharina Kalla, Katharina Bobe, Maria Brauneis, Carla Janning, Jens Nellesen, Wolfgang Czayka, Wolfgang Tillmann, Yufeng Zheng and Frank Witte

Acta Biomaterialia, 2015, 11, 554
DOI: 10.1016/j.actbio.2014.09.041

New horizon for high performance Mg-based biomaterial with uniform degradation behavior: Formation of stacking faults

Jinghuai Zhang, Chi Xu, Yongbin Jing, Shuhui Lv, Shujuan Liu, Daqing Fang, Jinpeng Zhuang, Milin Zhang and Ruizhi Wu

Sci Rep, 2015, 5
DOI: 10.1038/srep13933

Synergistic improvement of antibacterial, mechanical and degradation properties of Cu added Mg-Zn-Zr alloy

Santanu Mandal, Satyabrata Nigamananda Sahoo, Vamsi K. Balla, Mitun Das and Mangal Roy

Materials Letters, 2023, 339, 134115
DOI: 10.1016/j.matlet.2023.134115

Origin of the time-dependent corrosion behavior of biodegradable Mg-Si-Zn alloys in simulated body fluid

Guilherme Lisboa de Gouveia, José Eduardo Spinelli and Guilherme Yuuki Koga

Corrosion Science, 2024, 237, 112326
DOI: 10.1016/j.corsci.2024.112326

A “built-up” composite film with synergistic functionalities on Mg–2Zn–1Mn bioresorbable stents improves corrosion control effects and biocompatibility

Zhenglong Dou, Shuiling Chen, Jiacheng Wang, Li Xia, Manfred F. Maitz, Qiufen Tu, Wentai Zhang, Zhilu Yang and Nan Huang

Bioactive Materials, 2023, 25, 223
DOI: 10.1016/j.bioactmat.2023.02.004

Effect of Annealing Temperature on Microstructure and Properties of Solid Solution Extruded Mg–2.0Zn–1.0Y–0.5Zr Alloys

Junguang He, Zhenfei Cheng, Jiuba Wen, Peiwu Tian, Wuyun Feng, Xiangyang Zheng and Yuan Gong

Alloys, 2024, 3, 140
DOI: 10.3390/alloys3020008

Properties of MgCaZr Alloys

Jan Serak, Cyril Simon and Dalibor Vojtech

Manufacturing Technology, 2022, 22, 461
DOI: 10.21062/mft.2022.054

Electrochemical formation of Mg-Li-Ce-Y alloys by codeposition of Mg, Li, Ce and Y in molten LiCl-KCl salt

Zhengrong Su, Xudong Wang, Yixin Qian, Mei Li, Rugeng Liu and Wei Han

Journal of Alloys and Compounds, 2025, 1038, 182745
DOI: 10.1016/j.jallcom.2025.182745

Tailoring Biodegradation of Mg-Ca Alloy by Acid Pickling and Polydioxanone/n-Hydroxyapatite Composite Coating for Temporary Implant Applications

Mathew Gaius Cherian, Shebeer A. Rahim, V. P. Muhammad Rabeeh, M. A. Joseph and T. Hanas

J. of Materi Eng and Perform, 2023, 32, 2784
DOI: 10.1007/s11665-022-06972-5

The Application of the Rare Earths to Magnesium and Titanium Metallurgy in Australia

Arne Biesiekierski, Yuncang Li and Cuie Wen

Advanced Materials, 2020, 32
DOI: 10.1002/adma.201901715

Preparation and characterization of composite coating on Mg-1.74Zn-0.55Ca alloy by micro-arc oxidation combined with sol-gel method

Jinhe Dou, Huijun Yu and Chuanzhong Chen

Materials Letters, 2019, 255, 126578
DOI: 10.1016/j.matlet.2019.126578

Challenges and opportunities for biodegradable magnesium alloy implants

K. Kumar, R. S. Gill and U. Batra

Materials Technology, 2018, 33, 153
DOI: 10.1080/10667857.2017.1377973

An Investigation on Microstructure Evolution, Mechanical Properties, and Strain Aging of Mg-1.8Zn-0.7Si-0.4Ca Biomedical Alloy Processed by Equal Channel Angular Pressing

M. Shaeri, K. Karimi Taheri, A. Karimi Taheri and M. H. Shaeri

J. of Materi Eng and Perform, 2019, 28, 5207
DOI: 10.1007/s11665-019-04218-5

Degradation of differently processed Mg-based implants leads to distinct foreign body reactions (FBRs) through dissimilar signaling pathways

Xiaosong Liu, Guoqiang Chen, Xiongxiong Zhong, Tianfang Wang, Xiaohong He, Weipeng Yuan, Pingping Zhang, Ying Liu, Dongming Cao, Shu Chen, Ken-ichi Manabe, Zhengyi Jiang, Tsuyoshi Furushima, Damon Kent, Yang Chen, Guoying Ni, Mingyong Gao and Hejie Li

Journal of Magnesium and Alloys, 2023, 11, 2106
DOI: 10.1016/j.jma.2022.03.017

Rare-earth- and aluminum-free, high strength dilute magnesium alloy for Biomedical Applications

Md Ershadul Alam, Soupitak Pal, Ray Decker, Nicholas C. Ferreri, Marko Knezevic and Irene. J. Beyerlein

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-72374-z

Corrosion Resistance and Cytocompatibility of Magnesium–Calcium Alloys Modified with Zinc- or Gallium-Doped Calcium Phosphate Coatings

Dilara Goksu Tamay, Seyda Gokyer, Jürgen Schmidt, Alina Vladescu, Pinar Yilgor Huri, Vasif Hasirci and Nesrin Hasirci

ACS Appl. Mater. Interfaces, 2022, 14, 104
DOI: 10.1021/acsami.1c16307

The Potential Application of AZ31-Mg(OH)2/CeO2 as Temporary Medical Implants: Evaluation of the Corrosion Resistance and Biocompatibility Properties

Edgar Onofre-Bustamante, Rosa M. Lozano, María L. Escudero, Ana C. Espíndola-Flores and Sandra E. Benito-Santiago

Coatings, 2025, 15, 450
DOI: 10.3390/coatings15040450

Spark plasma sintering of a novel Mg-0.7Ca alloy: A comprehensive study

Parisa Golmohammadi, Behzad Nayebi, Ahmad Bahmani, Nader Parvin and Woo Jin Kim

Journal of Magnesium and Alloys, 2025, 13, 1325
DOI: 10.1016/j.jma.2025.02.004

Experimental Study on the Determination of Test Conditions for the Simulated Human Body Environment of Biodegradable Hybrid Composite Bone Plates

Ho Seok Lee and Seung Hwan Chang

Polymer Composites, 2026
DOI: 10.1002/pc.70836

Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions

Koji Hagihara, Masayoshi Okubo, Michiaki Yamasaki and Takayoshi Nakano

Corrosion Science, 2016, 109, 68
DOI: 10.1016/j.corsci.2016.03.019

Microstructures and degradation mechanism in simulated body fluid of biomedical Mg–Zn–Ca alloy processed by high pressure torsion

C.Z. Zhang, S.J. Zhu, L.G. Wang, R.M. Guo, G.C. Yue and S.K. Guan

Materials & Design, 2016, 96, 54
DOI: 10.1016/j.matdes.2016.01.072

Inhibitive effect of sodium molybdate on corrosion of AZ31 magnesium alloy in chloride solutions

Maria A. Osipenko, Dzmitry S. Kharytonau, Aliaksandr A. Kasach, Jacek Ryl, Janusz Adamiec and Irina I. Kurilo

Electrochimica Acta, 2022, 414, 140175
DOI: 10.1016/j.electacta.2022.140175

Microstructural effects on mechanical properties and degradation behavior of Mg–Cu alloy

Xudong Yan, Peng Wan, Lanyue Chen, Lili Tan, Xiaofeng Xu and Ke Yang

Materialia, 2021, 16, 101089
DOI: 10.1016/j.mtla.2021.101089

Synthesis, mechanical properties and corrosion behavior of powder metallurgy processed Fe/Mg2Si composites for biodegradable implant applications

M. Sikora-Jasinska, C. Paternoster, E. Mostaed, R. Tolouei, R. Casati, M. Vedani and D. Mantovani

Materials Science and Engineering: C, 2017, 81, 511
DOI: 10.1016/j.msec.2017.07.049

Laser powder bed fusion of biodegradable magnesium alloys: process, microstructure and properties

Xuehua Wu, Junying Liu, Youwen Yang, Jing Bai, Cijun Shuai, Joseph Buhagiar and Xinghai Ning

Int. J. Extrem. Manuf., 2025, 7, 022007
DOI: 10.1088/2631-7990/ad967e

Development, Processing and Aging of Novel Zn-Ag-Cu Based Biodegradable Alloys

Alexander Heiss, Venkat Sai Thatikonda, Andreas Richter, Lisa-Yvonn Schmitt, Daesung Park and Ulrich E. Klotz

Materials, 2023, 16, 3198
DOI: 10.3390/ma16083198

Influence of simultaneous alloying with Ca and Sc on the high temperature deformation mechanism, texture, and recrystallization behavior of Mg-Ca-Sc alloys

Chetan Singh, R. Lakshmi Narayan and Jayant Jain

Materials Characterization, 2021, 179, 111343
DOI: 10.1016/j.matchar.2021.111343

Development of magnesium alloys as a “highly-functional structural material”

Koji Hagihara

Journal of Japan Institute of Light Metals, 2017, 67, 293
DOI: 10.2464/jilm.67.293

Bioactive Glass and Silicate-Based Ceramic Coatings on Metallic Implants: Open Challenge or Outdated Topic?

Giulia Brunello, Hamada Elsayed and Lisa Biasetto

Materials, 2019, 12, 2929
DOI: 10.3390/ma12182929

In Vitro Corrosion Behavior and Cytotoxicity of Polycaprolactone–Akermanite-Coated Friction-Welded Commercially Pure Ti/AZ31 for Orthopedic Applications

Mojtaba Sadeghi Gogheri, Masoud Kasiri-Asgarani, Hamid Reza Bakhsheshi-Rad, Hamid Ghayour and Mahdi Rafiei

J. of Materi Eng and Perform, 2020, 29, 6053
DOI: 10.1007/s11665-020-04952-1

Laser surface alloying of titanium alloy with silver: Microstructure, hardness and corrosion property

Q. Qiao, V.A.M. Cristino, L.M. Tam and C.T. Kwok

Surface and Coatings Technology, 2023, 458, 129357
DOI: 10.1016/j.surfcoat.2023.129357

Improvements in mechanical, corrosion, and biocompatibility properties of Mg–Zr–Sr–Dy alloys via extrusion for biodegradable implant applications

Faisal Kiani, Jixing Lin, Khurram Munir, Cuie Wen and Yuncang Li

Journal of Magnesium and Alloys, 2023, 11, 3840
DOI: 10.1016/j.jma.2023.09.031

Composition-Dependent Structural and Electronic Properties of Mg95–xZnxCa5 Metallic Glasses: An Ab Initio Molecular Dynamics Study

S. N. Li, J. B. Liu, J. H. Li, J. Wang and B. X. Liu

J. Phys. Chem. B, 2015, 119, 3608
DOI: 10.1021/acs.jpcb.5b00400

Effects of grain boundaries on the biocompatibility of the pure magnesium

Mojtaba Fatehi Mollayousef, Ahmad Bahmani, Mehdi Malekan, Mehrab Lotfpour, Rouhollah Mehdinavaz Aghdam, Fatemeh Asl Zaeem, Soraya Bornay Zonoozi and Arash Montazeri

Journal of Materials Research and Technology, 2024, 28, 1121
DOI: 10.1016/j.jmrt.2023.11.284

Enhanced PVDF Coating via Zr-Based Pretreatment on AZ31 Magnesium Alloy

Hailuo Fu, Chenghao Zhu, Dali Wei, Qing Lin, Yihan Jiao and Shuyang Liu

Coatings, 2025, 15, 1501
DOI: 10.3390/coatings15121501

In vitro degradation and mechanical behaviour of calcium phosphate coated Mg-Ca alloy

Shebeer A. Rahim, T. T Nikhil, M. A. Joseph and T. Hanas

Materials Technology, 2021, 36, 738
DOI: 10.1080/10667857.2020.1794278

Microstructure and corrosion properties of Mg–0.5Zn–0.2Ca–0.2Ce alloy with different processing conditions

Cheng Zhang, Liang Wu, Guang‐Sheng Huang, Guan‐Gang Wang, Bin Jiang and Fu‐Sheng Pan

Rare Metals, 2021, 40, 1924
DOI: 10.1007/s12598-020-01478-2

Evaluation of a Porous Bioabsorbable Interbody Mg-Zn Alloy Cage in a Goat Cervical Spine Model

Haocheng Xu, Fan Zhang, Hongli Wang, Fang Geng, Minghao Shao, Shun Xu, Xinlei Xia, Xiaosheng Ma, Feizhou Lu and Jianyuan Jiang

BioMed Research International, 2018, 2018, 1
DOI: 10.1155/2018/7961509

The influence of pH on the corrosion rate of high-purity Mg, AZ91 and ZE41 in bicarbonate buffered Hanks' solution

Sean Johnston, Zhiming Shi and Andrej Atrens

Corrosion Science, 2015, 101, 182
DOI: 10.1016/j.corsci.2015.09.018

Active corrosion protection of super-hydrophobic corrosion inhibitor intercalated Mg–Al layered double hydroxide coating on AZ31 magnesium alloy

Xin Wang, Chuan Jing, Yuxiang Chen, Xiushuang Wang, Gang Zhao, Xing Zhang, Liang Wu, Xiaoying Liu, Biqin Dong and Yuxin Zhang

Journal of Magnesium and Alloys, 2020, 8, 291
DOI: 10.1016/j.jma.2019.11.011

Effect of Sr on Mechanical Properties and Corrosion Behavior of Rolled ZM60 Alloy

Dongsong Yin, Yuting Zhou, Zhiyuan Liu, Yong Mao and Tianming Han

Materials, 2024, 17, 6166
DOI: 10.3390/ma17246166

Research Progress on LDH Corrosion-Resistant Films on Magnesium Alloy: A Review

Huan Li, Xue Bai and Wenjin Chen

Materials, 2025, 18, 5249
DOI: 10.3390/ma18225249

Formation of calcium phosphate coating on Mg-Zn-Ca alloy by micro-arc oxidation technique

Jinhe Dou, Huijun Yu, Chuanzhong Chen, Yaokun Pan, Dandan Gao and Xihua Zhang

Materials Letters, 2016, 164, 575
DOI: 10.1016/j.matlet.2015.11.068

Recent advances in biodegradation controls over Mg alloys for bone fracture management: A review

Ming-Shi Song, Rong-Chang Zeng, Yun-Fei Ding, Rachel W. Li, Mark Easton, Ivan Cole, Nick Birbilis and Xiao-Bo Chen

Journal of Materials Science & Technology, 2019, 35, 535
DOI: 10.1016/j.jmst.2018.10.008

Effects of heat treatment on the corrosion behavior and mechanical properties of biodegradable Mg alloys

Meysam Mohammadi Zerankeshi, Reza Alizadeh, Ehsan Gerashi, Mohammad Asadollahi and Terence G. Langdon

Journal of Magnesium and Alloys, 2022, 10, 1737
DOI: 10.1016/j.jma.2022.04.010

Microstructure and Properties of Micro-Alloyed Mg–2.0Nd–0.2Sr by Heat Treatment and Extrusion

Zhenzhen Gui, Fan Jiang, Zhixin Kang, Fan Zhang, Zu Li and Jianhui Zhang

Acta Metall. Sin. (Engl. Lett.), 2023, 36, 323
DOI: 10.1007/s40195-022-01474-8

The Influence of Plasma Electrolytic Oxidation Parameters on the Composition, Structure, and Surface Properties of Rare-Earth WE43 Magnesium Alloy

A. V. Pospelov, A. A. Kasach, D. S. Kharitonov, A. R. Tsyganov and I. I. Kurilo

Prot Met Phys Chem Surf, 2024, 60, 449
DOI: 10.1134/S2070205124701909

High-throughput calculations combining machine learning to investigate the corrosion properties of binary Mg alloys

Yaowei Wang, Tian Xie, Qingli Tang, Mingxu Wang, Tao Ying, Hong Zhu and Xiaoqin Zeng

Journal of Magnesium and Alloys, 2024, 12, 1406
DOI: 10.1016/j.jma.2021.12.007

Low addition of Er and Zn into biomedical magnesium with enhanced integrated properties for orthopedic applications: in vitro and in vivo studies

Jianing Liu, Yulin Lin, Ming Wang, Dong Bian, Shan Yang, Shi Cheng, Hong Xia, Yu Zhang, Zhigang Xu and Yufeng Zheng

Bioactive Materials, 2026, 57, 16
DOI: 10.1016/j.bioactmat.2025.10.039

Ultrathin hydroxyapatite coating on pure magnesium substrate prepared by pulsed electron ablation technique

Drahomir Dvorsky, Alessandro Gambardella, Jiri Kubasek, Matteo Berni and Dalibor Vojtech

Materials & Corrosion, 2020, 71, 1794
DOI: 10.1002/maco.202011721

Biodegradable Mg-based alloys: biological implications and restorative opportunities

Xiao Lin, Saijilafu, Xiexing Wu, Kang Wu, Jianquan Chen, Lili Tan, Frank Witte, Huilin Yang, Diego Mantovani, Huan Zhou, Chunyong Liang, Qiang Yang, Ke Yang and Lei Yang

International Materials Reviews, 2023, 68, 365
DOI: 10.1080/09506608.2022.2079367

Effect of Ag content and extrusion on the microstructure and mechanical properties of Mg–Ag alloys

Guanqi Liu, Kai Wang, Yiyang Pan, Di Yang, Xiaodong Yu, Zhihua Nie, Jianhua Zhu, Jianmin Han and Chengwen Tan

Journal of Materials Research and Technology, 2024, 30, 5916
DOI: 10.1016/j.jmrt.2024.04.237

Влияние параметров плазменно-электролитического оксидирования на состав, структуру и свойства поверхности легированного редкоземельными элементами сплава магния WE43

A. В. Поспелов, A. A. Касач, Д. С. Харитонов, A. Р. Цыганов and И. И. Курило

Zaŝita metallov, 2024, 60, 75
DOI: 10.31857/S0044185624010084

Effects of alloying elements on performance of biodegradable magnesium alloy

Rajender Kumar and Puneet Katyal

Materials Today: Proceedings, 2022, 56, 2443
DOI: 10.1016/j.matpr.2021.08.233

2D magnesium phosphate resorbable coating to enhance cell adhesion on titanium surfaces

Amir Elhadad, Mohamed A. Mezour, Lina Abu Nada, Samar Shurbaji, Alaa Mansour, Sophia Smith, Hanan Moussa, Lisa lee, Eva M. Pérez-Soriano, Monzur Murshed, Richard Chromik and Faleh Tamimi

Materials Chemistry and Physics, 2024, 316, 129114
DOI: 10.1016/j.matchemphys.2024.129114

In vivo and in vitro performances of chitosan-coated Mg–Zn–Zr–Gd–Ca alloys as bone biodegradable materials in rat models

Qiuxia Zheng, Zhanhui Wang, Zongbin Sun, Jiuba Wen, Tinghe Duan and Bingbing Zhang

J Biomater Appl, 2022, 36, 1786
DOI: 10.1177/08853282211052385

Effect of Zn content and processing route on the microstructure, mechanical properties, and bio-degradation of Mg–Zn alloys

Mohammad Asadollahi, Ehsan Gerashi, Reza Alizadeh and Reza Mahmudi

Journal of Materials Research and Technology, 2022, 21, 4473
DOI: 10.1016/j.jmrt.2022.11.041

Zr Addition and Milling Time Impact on the Microstructure and Phase Analysis of New Mg-3Zn-xZr (x = 0, 0.5, 1, 2, and 3) Alloys Synthesized with High-Energy Ball Milling and the Subsequent Sintering

M. Yahyazameh, M. Kavanlouei, M. Shahbaz and Younes Beygi-Khosrowshahi

J. of Materi Eng and Perform, 2026, 35, 5647
DOI: 10.1007/s11665-025-12024-5

Tailoring biodegration rate of AZ31 magnesium alloy

Y.B. Bozkurt and A. Çelik

Electrochimica Acta, 2022, 435, 141403
DOI: 10.1016/j.electacta.2022.141403

Influence of extrusion ratios on the microstructure, mechanical properties, and biocorrosion behavior of Mg-1.0Zn-0.3Zr-1.5Er alloy

Junguang He, Xuyang Li, Qinglei Gao, Wuyun Feng, Yilong Liu, Jiajun Luo, Huan Li and Jiuba Wen

Materials Today Communications, 2026, 50, 114539
DOI: 10.1016/j.mtcomm.2025.114539

Magnesium-Titanium Alloys: A Promising Solution for Biodegradable Biomedical Implants

Sachin Kumar Sharma, Sandra Gajević, Lokesh Kumar Sharma, Reshab Pradhan, Slavica Miladinović, Aleksandar Ašonja and Blaža Stojanović

Materials, 2024, 17, 5157
DOI: 10.3390/ma17215157

In-vitro corrosion and biocompatibility properties of heat treated Mg-4Y-2.25Nd-0.5Zr alloy

Anuradha Jana, Vamsi Krishna Balla and Mitun Das

Materials Chemistry and Physics, 2023, 304, 127873
DOI: 10.1016/j.matchemphys.2023.127873

Microstructures, Mechanical Properties, and Corrosion Behavior of As-Cast Mg–2.0Zn–0.5Zr–xGd (wt %) Biodegradable Alloys

Huai Yao, Jiuba Wen, Yi Xiong, Ya Liu, Yan Lu and Wei Cao

Materials, 2018, 11, 1564
DOI: 10.3390/ma11091564

Degradation behaviour of Mg-4Ag and Mg-5Gd alloys under in-vitro conditions and different time-frames

Hanuma Reddy Tiyyagura, Barbara Petovar, Matjaž Finšgar, Regine Willumeit-Römer, Bérengère J.C. Luthringer, Mantravadi Krishna Mohan and Vanja Kokol

Journal of Alloys and Compounds, 2019, 774, 980
DOI: 10.1016/j.jallcom.2018.09.330

In vitro and in vivo degradation assessment and preventive measures of biodegradable Mg alloys for biomedical applications

Anuradha Jana, Mitun Das and Vamsi Krishna Balla

J Biomedical Materials Res, 2022, 110, 462
DOI: 10.1002/jbm.a.37297

In-vitro corrosion assessment of silicate-coated AZ31 Mg alloy in Earle’s solution

M. Kalaiyarasan, K. Saranya and N. Rajendran

J Mater Sci, 2020, 55, 3571
DOI: 10.1007/s10853-019-04039-w

Development of Novel Lightweight Metastable Metal–(Metal + Ceramic) Composites Using a New Powder Metallurgy Approach

Khin Sandar Tun, Akshay Padnuru Sripathy, Sravya Tekumalla and Manoj Gupta

Materials, 2020, 13, 3283
DOI: 10.3390/ma13153283

Biyobozunur ZW21 Döküm Alaşımlarının Mikroyapı, Sertlik ve Korozyon Özelliklerini İncelenmesi

Kenza DJEBARI, Yunus TÜREN, Hayrettin AHLATCI and Levent ELEN

EJOSAT, 2022
DOI: 10.31590/ejosat.1202073

Structure and red emissions of Eu3+-doped hydrocalumite prepared in ethanol/water media

Kunlei Zhang, Yufeng Chen, Xiaoqing Wang and Li Wang

Journal of Rare Earths, 2019, 37, 45
DOI: 10.1016/j.jre.2018.04.018

Influence of laser surface melting on the properties of MB26 and AZ80 magnesium alloys

Yuhang Li, Srinivasan Arthanari and Yingchun Guan

Surface and Coatings Technology, 2019, 378, 124964
DOI: 10.1016/j.surfcoat.2019.124964

Semi-quantitative elemental imaging of corrosion products from bioabsorbable Mg vascular implants in vivo

Weilue He, Keith W. MacRenaris, Adam Griebel, Maria P. Kwesiga, Erico Freitas, Amani Gillette, Jeremy Schaffer, Thomas V. O'Halloran and Roger J. Guillory II

Bioactive Materials, 2025, 43, 225
DOI: 10.1016/j.bioactmat.2024.07.023

Hydrothermal growth of hydroxyapatite and ZnO bilayered nanoarrays on magnesium alloy surface with antibacterial activities

Mengke Peng, Fenyan Hu, Minting Du, Bingjie Mai, Shurong Zheng, Peng Liu, Changhao Wang and Yashao Chen

Front. Mater. Sci., 2020, 14, 14
DOI: 10.1007/s11706-020-0489-5

Preparation of vancomycin-loaded alginate hydrogel coating on magnesium alloy with enhanced anticorrosion and antibacterial properties

Minting Du, Linlin Huang, Mengke Peng, Fenyan Hu, Qiang Gao, Yashao Chen and Peng Liu

Thin Solid Films, 2020, 693, 137679
DOI: 10.1016/j.tsf.2019.137679

Corrosion of Commercial Mg–Al Alloys: AZ31B, AM60, and AZ91D

Ashlee Aiello and Karl Sieradzki

J. Electrochem. Soc., 2020, 167, 101510
DOI: 10.1149/1945-7111/ab9cd6

Corrosion resistance of AZ31B magnesium alloy with a conversion coating produced from a choline chloride—Urea based deep eutectic solvent

C.D. Gu, W. Yan, J.L. Zhang and J.P. Tu

Corrosion Science, 2016, 106, 108
DOI: 10.1016/j.corsci.2016.01.030

Magnesium‐Based Biodegradable Alloy Materials for Bone Healing Application

Kena Dachasa, Tsion Chuni Aklilu, Bethelhem Gashaw Ewnete, Balisa Mosisa Ejeta, Fetene Fufa Bakare and Sachin Salunkhe

Advances in Materials Science and Engineering, 2024, 2024
DOI: 10.1155/2024/1325004

Enhancing biocompatibility and corrosion resistance of biodegradable Mg-Zn-Y-Nd alloy by preparing PDA/HA coating for potential application of cardiovascular biomaterials

Jing-an Li, Li Chen, Xue-qi Zhang and Shao-kang Guan

Materials Science and Engineering: C, 2020, 109, 110607
DOI: 10.1016/j.msec.2019.110607

Indirect Enhancement of ALD Thin-Film Properties Induced by the ECAP Modification of an As-Extruded Mg-Ca Alloy

Pi-Chen Lin, Jun-Yu Li, Hou-Jen Chen, Kaifan Lin, Miin-Jang Chen, Kun-Ming Lin and Hsin-Chih Lin

Micromachines, 2024, 15, 1006
DOI: 10.3390/mi15081006

A review of the different fabrication techniques of porous Mg structures considering the effect of manufacturing parameters on corrosion rate and mechanical properties in the bio application

Shoufa Liu, Pengfei Huang, Yanan Zhou, Shaoguo Zhang and Yenwei Wang

J Mater Sci, 2023, 58, 6556
DOI: 10.1007/s10853-023-08400-y

Design of the double-layer biocompatible coating on AZ31 magnesium alloy for highly effective corrosion resistance

Yuanyong Ouyang, Zhihao Chen, Chunyun Jiang, Wenzhong Yang, Yun Chen, Xiaoshuang Yin and Ying Liu

Surface and Coatings Technology, 2021, 428, 127897
DOI: 10.1016/j.surfcoat.2021.127897

Microstructures, mechanical properties and degradation behavior of as-extruded Mg-1.8Zn-0.5Zr-xGd (0 ≤ x ≤ 2.5 wt%) biodegradable alloys

Huai Yao, Boyang Fang, Huina Shi, Harishchandra Singh, Marko Huttula and Wei Cao

J Mater Sci, 2021, 56, 11137
DOI: 10.1007/s10853-021-05982-3

Tailoring of Mg and MgLi thin-film corrosion rates with dielectric barrier discharge plasma treatment

Lisa Hanke, Torge Hartig, Felix Weisheit, Tim Tjardts, Tim Pogoda, Franz Faupel and Eckhard Quandt

Journal of Vacuum Science & Technology A, 2023, 41
DOI: 10.1116/6.0002783

Review of magnesium-based biomaterials and their applications

Nurettin Sezer, Zafer Evis, Said Murat Kayhan, Aydin Tahmasebifar and Muammer Koç

Journal of Magnesium and Alloys, 2018, 6, 23
DOI: 10.1016/j.jma.2018.02.003

Microstructure, corrosion rate, and mechanical properties of unidirectionally and cross‐rolled Mg‐0.375Ga and Mg‐0.750Ga alloys

Anabel A. Hernández‐Cortés, José C. Escobedo‐Bocardo, Dora A. Cortés‐Hernández, Ricardo H. Vazquez‐Montiel, J. Salomón Peralta‐Montes and José M. Almanza‐Robles

J Biomed Mater Res, 2022, 110, 646
DOI: 10.1002/jbm.b.34943

The Influence of Rapid Solidification on Corrosion Behavior of Mg60Zn20Yb15.7Ca2.6Sr1.7 Alloy for Medical Applications

Katarzyna Młynarek-Żak, Anna Sypien, Tomasz Czeppe, Anna Bajorek, Aneta Kania and Rafał Babilas

Materials, 2021, 14, 5703
DOI: 10.3390/ma14195703

Microstructure, Mechanical Properties, and Corrosion Behavior of a Novel Biodegradable Zn–2Sn–0.5Sr Implant Alloy Prepared by Ultrasonic Treatment

Qinglin Li, Zhixin Zhao, Jing Yang, Dexue Liu, Yefeng Lan and Xiaowu Hu

Inter Metalcast, 2023, 17, 3104
DOI: 10.1007/s40962-023-00993-z

In- vitro corrosion behavior of the cast and extruded biodegradable Mg-Zn-Cu alloys in simulated body fluid (SBF)

Mehrab Lotfpour, Changiz Dehghanian, Massoud Emamy, Ahmad Bahmani, Mehdi Malekan, Ahmad Saadati, Milad Taghizadeh and Mohammadreza Shokouhimehr

Journal of Magnesium and Alloys, 2021, 9, 2078
DOI: 10.1016/j.jma.2021.01.002

Influence of bimodal grain size distribution on the corrosion resistance of Mg–4Li–3Al–1Zn (LAZ431)

Anna Dobkowska, Bogusława Adamczyk – Cieślak, Dariusz Kuc, Eugeniusz Hadasik, Tomasz Płociński, Ewa Ura-Bińczyk and Jarosław Mizera

Journal of Materials Research and Technology, 2021, 13, 346
DOI: 10.1016/j.jmrt.2021.04.078

Tailoring biomineralization and biodegradation of Mg–Ca alloy by acetic acid pickling

Shebeer A Rahim, M A Joseph and Hanas T

Mater. Res. Express, 2020, 7, 054002
DOI: 10.1088/2053-1591/ab8d5f

Microstructure-corrosion behaviour relationship of micro-alloyed Mg-0.5Zn alloy with the addition of Ca, Sr, Ag, In and Cu

Yiming Jin, Carsten Blawert, Hong Yang, Björn Wiese, Frank Feyerabend, Jan Bohlen, Di Mei, Min Deng, Maria Silva Campos, Nico Scharnagl, Katharina Strecker, Julia Bode, Carla Vogt and Regine Willumeit-Römer

Materials & Design, 2020, 195, 108980
DOI: 10.1016/j.matdes.2020.108980

Finite element model with realistic bone geometries for the optimal design of internal fixation during the fibula healing process

Yafeng Li, Peng Yi, Zichun Zou, Fengyuan Lu, Xi Zhang and Jing Zhang

Proc Inst Mech Eng H, 2024, 238, 207
DOI: 10.1177/09544119231221193

A spin–orbit configuration interaction study of the low-lying electronic states of the diatomic lithium antimonide cation

Zhuo-Jin Hu, Jin-Peng Wu, Rong-Yao Jiang, Shan-Jun Chen and Song Li

J. Phys. B: At. Mol. Opt. Phys., 2023, 56, 155101
DOI: 10.1088/1361-6455/acde25

Study on the Bioactivity Response of the Newly Developed Zn–Cu–Mn/Mg Alloys for Biodegradable Implant Application

Debajyoti Palai, Trina Roy, Amiyangshu De, Sayan Mukherjee, Sharba Bandyopadhyay, Santanu Dhara, Siddhartha Das and Karabi Das

ACS Biomater. Sci. Eng., 2024, 10, 6167
DOI: 10.1021/acsbiomaterials.4c00082

Improving the Corrosion Resistance of Magnesium Alloy by Magnesium Phosphate/Glass Composite Coatings Using Sol–Gel Method

Mohammad M. Farag, Hanaa Y. Ahmed and Zainab M. Al-Rashidy

Silicon, 2023, 15, 3841
DOI: 10.1007/s12633-022-02226-0

First Principles Calculations for Corrosion in Mg-Li-Al Alloys with Focus on Corrosion Resistance: A Comprehensive Review

Muhammad Abdullah Khan, Muhammad Usman and Yuhong Zhao

CMC, 2024, 81, 1905
DOI: 10.32604/cmc.2024.054691

Effects of solution treatment on microstructure, mechanical properties and corrosion behavior of Mg-2Zn-1Y-0.5Zr alloy

Dazhao Xu, Junguang He, Jiuba Wen, Xiaolei Ren, Yangfan Wang and Tao Zeng

Mater. Res. Express, 2019, 6, 125411
DOI: 10.1088/2053-1591/ab47d0

Effect of Adding Rare Earth Elements Er and Gd on the Corrosion Residual Strength of Magnesium Alloy

Miao Yang, Xiaobo Liu, Zhiyi Zhang, Yulai Song and Lei Bai

Open Physics, 2019, 17, 373
DOI: 10.1515/phys-2019-0042

Effects of friction stir processing and nano-hydroxyapatite on the microstructure, hardness, degradation rate and in-vitro bioactivity of WE43 alloy for biomedical applications

Bo Wu, Farazila Yusof, Fuguo Li, Huan Miao, A.R. Bushroa, Mohd Ridha Bin Muhamad, Irfan Anjum Badruddin and Mahmoud Z. Ibrahim

Journal of Magnesium and Alloys, 2024, 12, 209
DOI: 10.1016/j.jma.2023.10.010

Mg-based porous metals as cancellous bone analogous material: A review

N Jasmawati, SJ Fatihhi, AMS Putra, Ardiyansyah Syahrom, MN Harun, Andreas Öchsner and MR Abdul Kadir

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2017, 231, 544
DOI: 10.1177/1464420715624449

Influences of Na2SiO3 and EDTA-ZnNa2 concentration on properties of zinc-containing coatings on WE43 magnesium alloys

Yuanyuan Zhu, Shufang Zhang, Rongfang Zhao, Jin Lou, Rongfa Zhang, Xiaoxue Huan and Yijia Zhang

Surface and Coatings Technology, 2018, 356, 108
DOI: 10.1016/j.surfcoat.2018.09.059

The mechanical property and corrosion resistance of Mg-Zn-Nd alloy fine wires in vitro and in vivo

Ming Gao, Di Na, Xiangqiao Ni, Lihui Song, Iniobong P. Etim, Ke Yang, Lili Tan and Zheng Ma

Bioactive Materials, 2021, 6, 55
DOI: 10.1016/j.bioactmat.2020.07.011

Reinforced magnesium composites by metallic particles for biomedical applications

Alireza Vahid, Peter Hodgson and Yuncang Li

Materials Science and Engineering: A, 2017, 685, 349
DOI: 10.1016/j.msea.2017.01.017

Influence of Hot Extrusion on the Microstructure, Bio-Corrosion and SCC Resistance of a Cast Mg-2.5Gd-0.5Zr Alloy

M. Sabbaghian, B. Ebrahimpourghandi and R. Mahmudi

JOM, 2023, 75, 2363
DOI: 10.1007/s11837-023-05832-4

Enhancing surface characteristics of Mg-Zn-Sr alloy through cryo-ball burnishing; modeling and experimentation

S. Aditya Kudva, Gajanan Anne, S. Ramesh, Priyaranjan Sharma, Chandrappa Jagadeesh, Lingaraj Ritti, Gajanan Naik and G. Divya Deepak

J Mech Sci Technol, 2024, 38, 1175
DOI: 10.1007/s12206-024-0214-x

Effect of Manganese on the Microstructure, Mechanical Properties and Corrosion Behavior of Mg–1Zn–0.3Ca–0.3Sr–xMn Alloy

H. Hosseini, S. G. Shabestari, H. Saghafian, M. Faraji and M. Ghanbari

Metall Mater Trans B, 2025, 56, 4990
DOI: 10.1007/s11663-025-03671-z

Resorbable magnesium screws for fixation of medial epicondyle avulsion fractures in skeletally immature patients: A comparison with Kirschner wires

Marco Baldini, Valentino Coppa, Danya Falcioni, Giuseppe Cusano, Daniele Massetti, Mario Marinelli and Antonio Pompilio Gigante

Journal of Children's Orthopaedics, 2022, 16, 481
DOI: 10.1177/18632521221136100

Degradation behavior of the as-extruded and ECAP-processed Mg–4Zn alloy by Ca addition and hydrothermal coating

Mohammad Zohrevand, Meysam Mohammadi-Zerankeshi, Farzad Nobakht-Farin, Reza Alizadeh and Reza Mahmudi

Journal of Materials Research and Technology, 2022, 20, 1204
DOI: 10.1016/j.jmrt.2022.07.072

Computational design of Mg alloys with minimal galvanic corrosion

Krishnamohan Thekkepat, Hyung-Seop Han, Ji-Won Choi, Seung-Cheol Lee, Eul Sik Yoon, Guangzhe Li, Hyun-Kwang Seok, Yu-Chan Kim, Jae-Hun Kim and Pil-Ryung Cha

Journal of Magnesium and Alloys, 2022, 10, 1972
DOI: 10.1016/j.jma.2021.06.019

Corrosion properties of Mg-Zn-Ca-(Cu,Au) metallic glasses in artificial physiological fluid

Katarzyna Cesarz-Andraczke, Ryszard Nowosielski and Rafał Babilas

Archives of Civil and Mechanical Engineering, 2019, 19, 716
DOI: 10.1016/j.acme.2019.02.008

Precipitation Hardening on Mechanical and Corrosion Properties of Extruded Mg10Gd Modified with Nd and La

Petra Maier, Maximilian Bechly, Chamini L. Mendis and Norbert Hort

Metals, 2018, 8, 640
DOI: 10.3390/met8080640

Relationship of Corrosion Behavior Between Single-Phase Equiatomic CoCrNi, CoCrNiFe, CoCrNiFeMn Alloys and Their Constituents in NaCl Solution

D. P. Wang, J. W. Shen, Z. Chen, F. G. Chen, P. Y. Guo, Y. X. Geng and Y. X. Wang

Acta Metall. Sin. (Engl. Lett.), 2021, 34, 1574
DOI: 10.1007/s40195-021-01281-7

Effect of cell structure on mechanical and bio-corrosion behavior of biodegradable Mg-Zn-Ca foam

Jaber Asadi, Bahman Korojy, S. Alireza Hosseini and Mostafa Alishahi

Materials Today Communications, 2021, 28, 102715
DOI: 10.1016/j.mtcomm.2021.102715

In vitro evaluation of freeze-drying chitosan-mineralized collagen/Mg–Ca alloy composites for osteogenesis

Zhenbao Zhang, Xirao Sun, Jingxin Yang and Chengyue Wang

J Biomater Appl, 2022, 36, 1359
DOI: 10.1177/08853282211049296

Investigation of mechanical properties and antibacterial behavior of WE43 magnesium-based nanocomposite

O. Esmaielzadeh, A.R. Eivani, M. Mehdizade, S.M.A. Boutorabi and S.M. Masoudpanah

Materials Chemistry and Physics, 2023, 293, 126864
DOI: 10.1016/j.matchemphys.2022.126864

Enhanced osteoinductivity and corrosion resistance of dopamine/gelatin/rhBMP-2–coated β-TCP/Mg-Zn orthopedic implants: An in vitro and in vivo study

Congcong Liu, Jingcheng Wang, Chengde Gao, Zhenting Wang, Xiaohua Zhou, Mingying Tang, Kun Yu, Youwen Deng and Esmaiel Jabbari

PLoS ONE, 2020, 15, e0228247
DOI: 10.1371/journal.pone.0228247

Femtosecond laser surface processing combined with thermal oxidation for enhancing corrosion resistance of AZ31B magnesium alloy in chloride solutions

Sizhu Wu, Jiuhui Huang, Jinpeng Fang, Dayu Li, Jiawei Lu, Le Xiang, Nianwei Dai, Yachao Zhang, Yi Xiao and Wei Xiong

Surface and Coatings Technology, 2023, 470, 129870
DOI: 10.1016/j.surfcoat.2023.129870

Rare earth oxides nanoparticles formed on the surface of WE43 magnesium alloy subjected to anodic oxidation plus heat treatment for anti-bone tumor

Xugang Lu, Mei Zhang, Jun Chen, Shibing Xiong, Yipu Cao, Yifan Cui, Siqi Zhang, Simeng Wang and Bangcheng Yang

Ceramics International, 2024, 50, 54174
DOI: 10.1016/j.ceramint.2024.10.274

Influence of fine‐grained structure produced by groove pressing on the properties of pure Mg and commercial ZE41 alloy

Manas Ranjan Sahu, T. S. Sampath Kumar, Uday Chakkingal, Vimal Kumar Dewangan and Mukesh Doble

J Biomedical Materials Res, 2023, 111, 1161
DOI: 10.1002/jbm.a.37502

Microstructure Evolution in Mg-Zn-Zr-Gd Biodegradable Alloy: The Decisive Bridge Between Extrusion Temperature and Performance

Huai Yao, Jiu-Ba Wen, Yi Xiong, Yan Lu and Marko Huttula

Front. Chem., 2018, 6
DOI: 10.3389/fchem.2018.00071

Effect of Gallium Content and Heat Treatment on the Microstructure and Corrosion Rate of Magnesium Binary Alloys

Anabel A. Hernández-Cortés, José C. Escobedo-Bocardo, Dora A. Cortés-Hernández and José M. Almanza-Robles

Metals, 2019, 9, 990
DOI: 10.3390/met9090990

Effect of Ga content on corrosion behavior of Mg–Zn-Ga alloys in Hank's solution

Ziyue Zhang, Xueying Wang, Xiaolong Ma, Yang Zheng and Yan Li

Progress in Natural Science: Materials International, 2023, 33, 954
DOI: 10.1016/j.pnsc.2024.01.011

Biomaterials for orthopedic applications and techniques to improve corrosion resistance and mechanical properties for magnesium alloy: a review

Lizeth Del Carmen Gutiérrez Púa, Juan Carlos Rincón Montenegro, Ana María Fonseca Reyes, Habib Zambrano Rodríguez and Virginia Nathaly Paredes Méndez

J Mater Sci, 2023, 58, 3879
DOI: 10.1007/s10853-023-08237-5

Biofunctionalisation of porous additively manufactured magnesium-based alloys for Orthopaedic applications: A review

Tina Sadat Hashemi, Satish Jaiswal, Helen O. McCarthy, Tanya J. Levingstone and Nicholas J. Dunne

Biomaterials Advances, 2025, 169, 214170
DOI: 10.1016/j.bioadv.2024.214170

DFT Investigation of Electronic and Mechanical Properties of Binary Magnesium-Rare Earth Alloys Examined with Data Mining Approach

Fatiha Saidi, Ouahiba Ouadah and Nawel Ameur

ECS J. Solid State Sci. Technol., 2023, 12, 103007
DOI: 10.1149/2162-8777/acff83

Nadir Toprak Elementi İlaveli ZK60 (Ca/Ag) Alaşımlarının Korozyon Özelliklerinin İncelenmesi

Levent Elen, Deniz Ergin and Yunus Türen

Afyon Kocatepe University Journal of Sciences and Engineering, 2025, 25, 395
DOI: 10.35414/akufemubid.1502026

Enhanced corrosion resistance of the as-cast AZ91 magnesium alloy by micro-addition of the strontium and rare earth elements

Aria Afsharnaderi, Mehrab Lotfpour, Ahmad Bahmani, Hamed Mirzadeh, Mehdi Malekan, Massoud Emamy, Mojtaba Fatehi Mollayousef and Soraya Bornay Zonoozi

Materials Science and Technology, 2023, 39, 2885
DOI: 10.1080/02670836.2023.2228569

Microstructural Evolution, Mechanical Properties, and Biodegradability of a Gd-Containing Mg-Zn Alloy

M. Sabbaghian, R. Mahmudi and K. S. Shin

Metall Mater Trans A, 2021, 52, 1269
DOI: 10.1007/s11661-021-06160-5

Recent Advances in the Development of Magnesium-Based Alloy Guided Bone Regeneration (GBR) Membrane

Kai Chen, Li Zhao, Chenyang Huang, Xiaofei Yin, Xiaobo Zhang, Ping Li, Xuenan Gu and Yubo Fan

Metals, 2022, 12, 2074
DOI: 10.3390/met12122074

Corrosion behavior of a Mg–Zn–Ca–La alloy in 3.5 wt% NaCl solution

Yuzhou Du, Xin Wang, Dongjie Liu, Wanting Sun and Bailing Jiang

Journal of Magnesium and Alloys, 2022, 10, 527
DOI: 10.1016/j.jma.2020.08.004

Mechanical properties and biocorrosion resistance of the Mg-Gd-Nd-Zn-Zr alloy processed by equal channel angular pressing

Junyi Zhang, Zhixin Kang and Fen Wang

Materials Science and Engineering: C, 2016, 68, 194
DOI: 10.1016/j.msec.2016.05.118

The Fundamental Comparison of Zn–2Mg and Mg–4Y–3RE Alloys as a Perspective Biodegradable Materials

Jiří Kubásek, Drahomír Dvorský, Jiří Šedý, Šárka Msallamová, Jitka Levorová, René Foltán and Dalibor Vojtěch

Materials, 2019, 12, 3745
DOI: 10.3390/ma12223745

Bio-inspired biomaterial Mg–Zn–Ca: a review of the main mechanical and biological properties of Mg-based alloys

Luis Humberto Campos Becerra, Marco Antonio Ludovic Hernández Rodríguez, Hugo Esquivel Solís, Raúl Lesso Arroyo and Alejandro Torres Castro

Biomed. Phys. Eng. Express, 2020, 6, 042001
DOI: 10.1088/2057-1976/ab9426

Recent progress in superhydrophobic coating on Mg alloys: A general review

Feng Peng, Dongdong Zhang, Xuanyong Liu and Yu Zhang

Journal of Magnesium and Alloys, 2021, 9, 1471
DOI: 10.1016/j.jma.2020.08.024

Corrosion behaviour and cytocompatibility of selected binary magnesium-rare earth alloys

Hiba Azzeddine, Abdelkader Hanna, Achour Dakhouche and Bérengère Luthringer-Feyerabend

Journal of Magnesium and Alloys, 2021, 9, 581
DOI: 10.1016/j.jma.2020.09.003

Bio-properties of Mg-RE alloys: an applied study on cytotoxicity and genotoxicity

Kenza Djebari, Yunus Türen, Levent Elen, Hayrettin Ahlatçi, Büşra Moran Bozer and Bünyamin Çiçek

Canadian Metallurgical Quarterly, 2025, 64, 914
DOI: 10.1080/00084433.2024.2397190

In-vitro bio-corrosion behavior of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites

Yee-Hsien Ho, Sameehan S. Joshi, Tso-Chang Wu, Chu-Mao Hung, New-Jing Ho and Narendra B. Dahotre

Materials Science and Engineering: C, 2020, 109, 110632
DOI: 10.1016/j.msec.2020.110632

Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications

D. Carluccio, A. G. Demir, M. J. Bermingham and M. S. Dargusch

Metall Mater Trans A, 2020, 51, 3311
DOI: 10.1007/s11661-020-05796-z

Carbon Nanotube (CNT) Encapsulated Magnesium-Based Nanocomposites to Improve Mechanical, Degradation and Antibacterial Performances for Biomedical Device Applications

Jinguo Zhao, Ma Haowei, Abbas Saberi, Zahra Heydari and Madalina Simona Baltatu

Coatings, 2022, 12, 1589
DOI: 10.3390/coatings12101589

Bone cells influence the degradation interface of pure Mg and WE43 materials: Insights from multimodal in vitro analysis

Diana C. Martinez, Anke Borkam-Schuster, Heike Helmholz, Anna Dobkowska, Bérengère Luthringer-Feyerabend, Tomasz Płociński, Regine Willumeit-Römer and Wojciech Święszkowski

Acta Biomaterialia, 2024, 187, 471
DOI: 10.1016/j.actbio.2024.08.015

Strain-Rate Sensitivity, Tension-Compression Asymmetry, r-Ratio, Twinning, and Texture Evolution of a Rolled Magnesium Alloy Mg-1.3Zn-0.4Ca-0.4Mn

Evgenii Vasilev, Nicholas C. Ferreri, Ray Decker, Irene J. Beyerlein and Marko Knezevic

Metall Mater Trans A, 2020, 51, 3858
DOI: 10.1007/s11661-020-05841-x

Transgenic zebrafish model for quantification and visualization of tissue toxicity caused by alloying elements in newly developed biodegradable metal

Hyung-Seop Han, Gun Hyuk Jang, Indong Jun, Hyunseon Seo, Jimin Park, Sion Glyn-Jones, Hyun-Kwang Seok, Kwan Hyi Lee, Diego Mantovani, Yu-Chan Kim and James R. Edwards

Sci Rep, 2018, 8
DOI: 10.1038/s41598-018-32313-5

A Review of Stress-Corrosion Cracking and Corrosion Fatigue of Magnesium Alloys for Biodegradable Implant Applications

Sajjad Jafari, Shervin Eslami Harandi and R. K. Singh Raman

JOM, 2015, 67, 1143
DOI: 10.1007/s11837-015-1366-z

A comparative study of the bio-tribocorrosion behaviour of PEO coated AZ31 magnesium alloy in SBF: Assessing the effect of B, Cu and Zn doping

Y. Vangölü, Y.B. Bozkurt, H. Kovacı and A. Çelik

Ceramics International, 2023, 49, 19513
DOI: 10.1016/j.ceramint.2023.03.111

Advancements in Magnesium Applications, Biocompatible Implants to Nanoparticles in Medicine and Biomedical Innovations

Muhammad Mubeen, Salman Khalid, Mohammad Tabish, Mubashar Mahmood, Muhammad Jawad, Muhammad Uzair Malik and Ghulam Yasin

MetalMat, 2025, 2
DOI: 10.1002/metm.70003

Microstructural refinement and intermetallic strengthening in Zn–Mn alloys

Kar Fei Chan, Aizuddin Supee, Masaki Tanemura, Miyazaki Hidetoshi and Mohd Zamri Mohd Yusop

J Mater Sci, 2026, 61, 1297
DOI: 10.1007/s10853-025-11943-x

Microstructure and corrosion behavior of Mg-Sc binary alloys in 3.5 wt.% NaCl solution

Cheng Zhang, Liang Wu, Han Liu, Guangsheng Huang, Bin Jiang, Andrej Atrens and Fusheng Pan

Corrosion Science, 2020, 174, 108831
DOI: 10.1016/j.corsci.2020.108831

Electrophoretic deposition of alginate/bioglass composite coating on Mg Ca alloy for degradable metallic implant applications

K.S. Akshay, V.P. Muhammad Rabeeh, Shebeer A. Rahim, K.P. Sijina, G.K. Rajanikant and T. Hanas

Surface and Coatings Technology, 2022, 448, 128914
DOI: 10.1016/j.surfcoat.2022.128914

Compression properties, in vitro degradation behavior and biocompatibility of porous Mg-1Zn-1Ca-0.5Mn alloy scaffolds with different pore parameters

Shi Qiu, Zhe Li, Minfang Chen, Jingyu Zhang and Aixian Tian

Materials Today Communications, 2025, 42, 111072
DOI: 10.1016/j.mtcomm.2024.111072

Effects of Si, Sn, Sr, Zn, and Zr on microstructure and properties of magnesium alloys for biomedical applications: a review

Rajadurai Murugesan, Siva Marimuthu, Manikandan Natarajan, Srikanth Holalu Venkataramana, Praveena Bindiganavile Anand and Muhammad Imam Ammarullah

Philosophical Magazine Letters, 2025, 105
DOI: 10.1080/09500839.2025.2525095

Development and prospects of degradable magnesium alloys for structural and functional applications in the fields of environment and energy

Yuanding Huang, Yaping Zhang, Jiangfeng Song, Fusheng Pan, Regine Willumeit-Römer, Karl Ulrich Kainer and Norbert Hort

Journal of Magnesium and Alloys, 2023, 11, 3926
DOI: 10.1016/j.jma.2023.09.013

Evaluation of a new Mg–Zn–Ca–Y alloy for biomedical application

Yang Qu, Mingyang Kang, Rongpeng Dong, Jiansheng Liu, Junyang Liu and Jianwu Zhao

J Mater Sci: Mater Med, 2015, 26
DOI: 10.1007/s10856-014-5342-x

Microstructural homogeneity, texture and corrosion properties of RE-doped 55Mg-35Pb-9.2Al-0.8B alloy fabricated via equal channel angular pressing (ECAP)

Bo Li, Yonghua Duan, Shanju Zheng, Mengnie Li, Mingjun Peng and Huarong Qi

Journal of Alloys and Compounds, 2023, 966, 171607
DOI: 10.1016/j.jallcom.2023.171607

Biodegradable Magnesium Biomaterials—Road to the Clinic

Shukufe Amukarimi and Masoud Mozafari

Bioengineering, 2022, 9, 107
DOI: 10.3390/bioengineering9030107

Zinc-based alloys for degradable vascular stent applications

Ehsan Mostaed, Malgorzata Sikora-Jasinska, Jaroslaw W. Drelich and Maurizio Vedani

Acta Biomaterialia, 2018, 71, 1
DOI: 10.1016/j.actbio.2018.03.005

Design multifunctional Mg–Zr coatings regulating Mg alloy bioabsorption

Zohra Benzarti, Sandesh Itani, José David Castro, Sandra Carvalho and Ana Sofia Ramos

Journal of Magnesium and Alloys, 2024, 12, 1461
DOI: 10.1016/j.jma.2024.04.009

In Vitro Corrosion Study of Friction Stir Processed WE43 Magnesium Alloy in a Simulated Body Fluid

Genghua Cao, Datong Zhang, Weiwen Zhang and Wen Zhang

Materials, 2016, 9, 542
DOI: 10.3390/ma9070542

Improvement of in vitro behavior of an Mg alloy using a nanostructured composite bioceramic coating

Mehdi Razavi, Mohammadhossein Fathi, Omid Savabi, Lobat Tayebi and Daryoosh Vashaee

J Mater Sci: Mater Med, 2018, 29
DOI: 10.1007/s10856-018-6170-1

Formation and characterization of zirconium based conversion film on AZ31 magnesium alloy

Hailuo Fu, Dali Wei, Chenghao Zhu, Shuyang Liu and Qing Lin

Mater. Res. Express, 2024, 11, 096521
DOI: 10.1088/2053-1591/ad7811

Enhancing corrosion and wear performance of PEO coatings on Mg alloys using graphene and graphene oxide additions: A review

Arash Fattah-alhosseini and Razieh Chaharmahali

FlatChem, 2021, 27, 100241
DOI: 10.1016/j.flatc.2021.100241

Effect of strontium on microstructure, mechanical, and biological responses of Mg–Al–Zn–Sr alloys

Tapendu Mandal, Shalini Dasgupta, Ananya Barui and Sukumar Kundu

Materials Science and Technology, 2022, 38, 1134
DOI: 10.1080/02670836.2022.2072071

Designing Advanced Biomedical Biodegradable Mg Alloys: A Review

Murtatha M. Jamel, Mostafa M. Jamel and Hugo F. Lopez

Metals, 2022, 12, 85
DOI: 10.3390/met12010085

Magnesium an Optimal Material for Orthopedic Implants: A Review

Priyadarsini Morampudi, Venkata Satya Prasad Somayajula, Sundar S, A. Janagiraman, N. Nwulu, K. Natarajan, R. Shanmugasundaram, P.K. Balachandran, M. Krishnamoorthy and P. Mounica

E3S Web Conf., 2025, 619, 04010
DOI: 10.1051/e3sconf/202561904010

Review of bioresorbable AZ91, AZ31 and Mg–Zn–Ca implants and their manufacturing methods

V. Ezhilmaran, P. Suya Prem Anand, Suresh Kannan, N. Sivashanmugam, K. Jayakrishna and G. Kalusuraman

Materials Science and Technology, 2023, 39, 901
DOI: 10.1080/02670836.2022.2153207

Biocompatibility of bioabsorbable Mg–Ca alloys with rare earth elements addition

Daniel Fernandes, Celso Resende, Jacqueline Cavalcanti, Dexue Liu and Carlos Elias

J Mater Sci: Mater Med, 2019, 30
DOI: 10.1007/s10856-019-6330-y

The role of bismuth on the microstructure and corrosion behavior of ternary Mg–1.2Ca–xBi alloys for biomedical applications

H.Y. Tok, E. Hamzah and H.R. Bakhsheshi-Rad

Journal of Alloys and Compounds, 2015, 640, 335
DOI: 10.1016/j.jallcom.2015.03.217

Enhanced corrosion resistance of AM60 alloy with 2.0Ca via thermal oxidation and carbonization under an O₂/CO₂ atmosphere

S.Y. Liu, K. Tang, G.J. Liu, Z.H. Liu, X.Y. Lang, Y.F. Zhu and Q. Jiang

Journal of Materials Research and Technology, 2025, 35, 1690
DOI: 10.1016/j.jmrt.2025.01.146

Explainable Artificial Intelligence‐Integrated Optimization and Experimental Validation of Mechanical Performance in Mg‐Based Composites

Shahrukh Abid, Ching‐Chi Hsu, Song‐Jeng Huang and Mahnaz Mahmoudi Belvirdi

Adv Eng Mater, 2026, 28
DOI: 10.1002/adem.202502220

Impact of scandium and terbium on the mechanical properties, corrosion behavior, and biocompatibility of biodegradable Mg-Zn-Zr-Mn alloys

Khurram Munir, Jixing Lin, Xian Tong, Arne Biesiekierski, Yuncang Li and Cuie Wen

Journal of Magnesium and Alloys, 2024, 12, 546
DOI: 10.1016/j.jma.2024.02.002

Antitumor property of WE43 magnesium alloy subjected to anodic oxidation plus heat treatment

Xugang Lu, Rui Zuo, Jun Chen, Yi Hu, Changsheng Wei, Yuqiang Guo, Shibing Xiong, Simeng Wang, Siqi Zhang, Yifan Cui, Meiju Xie and Bangcheng Yang

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, 680, 132723
DOI: 10.1016/j.colsurfa.2023.132723

Improvement of corrosion resistance and biocompatibility of rare-earth WE43 magnesium alloy by neodymium self-ion implantation

Weihong Jin, Guosong Wu, Hongqing Feng, Wenhao Wang, Xuming Zhang and Paul K. Chu

Corrosion Science, 2015, 94, 142
DOI: 10.1016/j.corsci.2015.01.049

Influence of laser parameters on the microstructures and surface properties in laser surface modification of biomedical magnesium alloys

Chee Ying Tan, Cuie Wen and Hua Qian Ang

Journal of Magnesium and Alloys, 2024, 12, 72
DOI: 10.1016/j.jma.2023.12.008

In-vitro evaluation of a partially biodegradable TiMg dental implant: The cytotoxicity, genotoxicity, and oxidative stress

Yuksel Cetin, Ahmed Mohamed Hassan Ibrahim, Aysen Gungor, Yasemin Yildizhan, Martin Balog and Peter Krizik

Materialia, 2020, 14, 100899
DOI: 10.1016/j.mtla.2020.100899

The development of magnesium‐based biomaterials in bone tissue engineering: A review

Jiaxin Wu, Xinting Cheng, Jicenyuan Wu, Junyu Chen and Xibo Pei

J Biomed Mater Res, 2024, 112
DOI: 10.1002/jbm.b.35326

Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications

Sankalp Agarwal, James Curtin, Brendan Duffy and Swarna Jaiswal

Materials Science and Engineering: C, 2016, 68, 948
DOI: 10.1016/j.msec.2016.06.020

Effect of ECAP Processing on Corrosion Behavior and Mechanical Properties of the ZFW MP Magnesium Alloy as a Biodegradable Implant Material

Mozhgan Gholami‐Kermanshahi, Volkmar‐Dirk Neubert, Mansour Tavakoli, Filip Pastorek, Bohumil Smola and Volkmar Neubert

Adv Eng Mater, 2018, 20
DOI: 10.1002/adem.201800121

Influence of sample orientation on cytocompatibility of pure magnesium

Mojtaba Fatehi Mollayousef, Mehdi Malekan, Ahmad Bahmani and Mehrab Lotfpour

Materials Chemistry and Physics, 2024, 318, 129247
DOI: 10.1016/j.matchemphys.2024.129247

Enhanced hardness, cytotoxicity response, and antibacterial properties of Mg-Al-Ti alloy by micro-alloying with Ti and Al

Xiao Chen, Jinbo Li and Zhimin Yan

Journal of Alloys and Compounds, 2026, 1050, 185529
DOI: 10.1016/j.jallcom.2025.185529

Effects of Sr incorporation on surface structure and corrosion resistance of hydroxyapatite coated Mg-4Zn alloy for biomedical applications

Da-peng ZHAO, Wei SHI, Peng SHANG, He-min NIE, Yuan ZHANG and Jin-cheng TANG

Transactions of Nonferrous Metals Society of China, 2018, 28, 1563
DOI: 10.1016/S1003-6326(18)64798-3

In vitro Biodegradation and Biomineralization of Mg-Ca Alloys

T.T. Nikhil, Shebeer A.R, M.A. Joseph and T. Hanas

Materials Today: Proceedings, 2020, 22, 2870
DOI: 10.1016/j.matpr.2020.03.419

Realization and characterization of double-layer Ca-P coating on WE43 Mg alloy for biomedical applications

Mostafizur Rahman, Yuncang Li and Cuie Wen

Surface and Coatings Technology, 2020, 398, 126091
DOI: 10.1016/j.surfcoat.2020.126091

A First-Principle Study of Interactions between Magnesium and Metal-Atom-Doped Graphene

Yaoming Li, Xin Pei, Huang Zhang and Meini Yuan

Nanomaterials, 2022, 12, 834
DOI: 10.3390/nano12050834

Design of Biodegradable Mg Alloy for Abdominal Aortic Aneurysm Repair (AAAR) Using ANFIS Regression Model

Rania E. Hammam, Ahmed A. A. Solyman, Mohammed H. Alsharif, Peerapong Uthansakul and Mohanad A. Deif

IEEE Access, 2022, 10, 28579
DOI: 10.1109/ACCESS.2022.3155645

Corrosion behaviour of ECAP-processed Zn-0.8Li biodegradable alloy: An experimental and Ab initio study

Vladimir A. Bryzgalov, Andrey A. Kistanov, Olga B. Kulyasova and Elena A. Korznikova

Applied Surface Science, 2026, 726, 165844
DOI: 10.1016/j.apsusc.2026.165844

Recent developments in nonferrous metals and related materials for biomedical applications in China: a review

Hai‐Ling Tu, Hong‐Bin Zhao, Yan‐Yan Fan and Qing‐Zhu Zhang

Rare Metals, 2022, 41, 1410
DOI: 10.1007/s12598-021-01905-y

Severe plastic deformation (SPD) of biodegradable magnesium alloys and composites: A review of developments and prospects

M. Kasaeian-Naeini, M. Sedighi and R. Hashemi

Journal of Magnesium and Alloys, 2022, 10, 938
DOI: 10.1016/j.jma.2021.11.006

Biodegradable Mg alloys for orthopedic implants – A review

Violeta Tsakiris, Christu Tardei and Florentina Marilena Clicinschi

Journal of Magnesium and Alloys, 2021, 9, 1884
DOI: 10.1016/j.jma.2021.06.024

Advances in functionalized polymer coatings on biodegradable magnesium alloys – A review

Ling-Yu Li, Lan-Yue Cui, Rong-Chang Zeng, Shuo-Qi Li, Xiao-Bo Chen, Yufeng Zheng and M. Bobby Kannan

Acta Biomaterialia, 2018, 79, 23
DOI: 10.1016/j.actbio.2018.08.030

Thermodynamic re-assessment and experimental confirmation for the Zn–Mn system

Xiaojing Li, Shuhong Liu, Kai Xu, Yuhui Zhang and Yong Du

Calphad, 2020, 69, 101770
DOI: 10.1016/j.calphad.2020.101770

Competitive Effect of Grain Size and Second Phase on Corrosion Behavior of Biodegradable Mg-3Zn-1Mn-xSr Alloys

Xinming Di, Chunxiang Xu, Jinxiang Wu, Yuxing Dong and Qun Shi

J. of Materi Eng and Perform, 2022, 31, 3136
DOI: 10.1007/s11665-021-06426-4

Corrosion, stress corrosion cracking and corrosion fatigue behavior of magnesium alloy bioimplants

Priyabrata Das, T. S. Sampath Kumar, Kisor K. Sahu and Srikant Gollapudi

Corrosion Reviews, 2022, 40, 289
DOI: 10.1515/corrrev-2021-0088

Influence of Li+/Al3+ on the corrosion behavior of Li-Al layered double hydroxides (LDHs) film on LA51 magnesium alloys

Xinfang Zhang, Ruihong Li, Xiaoyan Feng, Xue Pang, Xu He, Zili Jin, Huiping Ren, Dashuang Wang, Kailin Li, Xingjian Dai, Zhilan Du, Quan Zhou and Yuxin Zhang

Journal of Magnesium and Alloys, 2023, 11, 1083
DOI: 10.1016/j.jma.2022.03.019

Synthesis and characteristics of Fe/Ni/Cr oxide nanoparticles/PLA hybrid composite coatings on Mg–Zn–Ca alloy

Prakash Kumar, Aditya Kudva S, AnilKumar T, Ramesh S, M.R. Ramesh, Ashwini Prabhu and Gajanan Anne

Journal of Materials Research and Technology, 2025, 35, 2573
DOI: 10.1016/j.jmrt.2025.01.180

Biocorrosion and Cytotoxicity Studies on Biodegradable Mg-Based Multicomponent Alloys

Priya Sudha, Khin Sandar Tun, Jisha Pillai, Mainak Dutta, Manoj Gupta and Vincent Shantha Kumar

Bioengineering, 2024, 11, 621
DOI: 10.3390/bioengineering11060621

Effect of alloying elements on the characteristics of metallic biodegradable materials: A review

Mohammed Gouda, Salah Salaman, Amr Basuony ElDeeb, Sengo Kobayashi, Wojciech Borek and Saad Ebied

Chinese Journal of Mechanical Engineering, 2026, 39, 100024
DOI: 10.1016/j.cjme.2025.100024

The effect of multi-pass friction stir processing on microstructure, mechanical properties, and corrosion behavior of WE43-nHA bio-composite

A.R. Eivani, M. Mehdizade, M. Ghosh and H.R. Jafarian

Journal of Materials Research and Technology, 2023, 22, 776
DOI: 10.1016/j.jmrt.2022.11.141

Zn-Li alloy after extrusion and drawing: Structural, mechanical characterization, and biodegradation in abdominal aorta of rat

Shan Zhao, Jan-M. Seitz, Rainer Eifler, Hans J. Maier, Roger J. Guillory, Elisha J. Earley, Adam Drelich, Jeremy Goldman and Jaroslaw W. Drelich

Materials Science and Engineering: C, 2017, 76, 301
DOI: 10.1016/j.msec.2017.02.167

High Power Diode Laser (HPDL) surface treatments to improve the mechanical properties and the corrosion behaviour of Mg-Zn-Ca alloys for biodegradable implants

N. Pulido-González, B. Torres, M.L. Zheludkevich and J. Rams

Surface and Coatings Technology, 2020, 402, 126314
DOI: 10.1016/j.surfcoat.2020.126314

Coatings on implants: Study on similarities and differences between the PCL coatings for Mg based lab coupons and final components

Deepa B. Prabhu, P. Gopalakrishnan and K.R. Ravi

Materials & Design, 2017, 135, 397
DOI: 10.1016/j.matdes.2017.09.043

Investigating Mg Biocorrosion In Vitro: Lessons Learned and Recommendations

Sean Johnston, Zhiming Shi, Jeffrey Venezuela, Cuie Wen, Matthew S. Dargusch and Andrej Atrens

JOM, 2019, 71, 1406
DOI: 10.1007/s11837-019-03327-9

Microstructures, mechanical properties, corrosion, and biocompatibility of extruded Mg-Zr-Sr-Ho alloys for biodegradable implant applications

Faisal Kiani, Jixing Lin, Alireza Vahid, Khurram Munir, Cuie Wen and Yuncang Li

Journal of Magnesium and Alloys, 2023, 11, 110
DOI: 10.1016/j.jma.2022.10.002

The effects of severe plastic deformation on the mechanical and corrosion characteristics of a bioresorbable Mg-ZKQX6000 alloy

M.W. Vaughan, A.I. Karayan, A. Srivastava, B. Mansoor, J.M. Seitz, R. Eifler, I. Karaman, H. Castaneda and H.J. Maier

Materials Science and Engineering: C, 2020, 115, 111130
DOI: 10.1016/j.msec.2020.111130

Accelerated corrosion of zinc, erbium and cerium co-doped Mg-alloys prepared by spark plasma sintering for bioresorbable implant applications

Tilottoma Saha, Fahmida Gulshan and Syed Ansar Md. Tofail

Materials Today Communications, 2023, 37, 107350
DOI: 10.1016/j.mtcomm.2023.107350

Development of sustainable novel Mg-Ca-Sc alloys with exceptional corrosion resistance

Chetan Singh, Subha Sanket Panda, Sudhanshu Shekhar Singh and Jayant Jain

Journal of Alloys and Compounds, 2023, 955, 170251
DOI: 10.1016/j.jallcom.2023.170251

Recent Progress on Corrosion Behavior and Mechanism of Mg–RE Based Alloys with Long Period Stacking Ordered Structure

Lisha Wang, Jinghua Jiang, Ting Yuan, Qiuyuan Xie, Huan Liu and Aibin Ma

Met. Mater. Int., 2020, 26, 551
DOI: 10.1007/s12540-019-00410-3

In Vitro Corrosion Behavior of As-Cast, T4-Treated, and As-Extruded Mg-Sn-Zn-Zr Alloys in Hank’s Solution

Quanfa Zhang, Tianshui Zhou, Feifei Guo and Dexue Liu

J. of Materi Eng and Perform, 2023, 32, 8299
DOI: 10.1007/s11665-022-07726-z

Magnesium alloy implant with photothermal-enhanced ferroptosis towards a multimodal therapy strategy for osteosarcoma

Lan Chen, Xi Wu, Dong Li, Shaosheng Jia, Jianan Yu, Bin Li, Jingan Li, Lingchuang Bai and Shaokang Guan

Chemical Engineering Journal, 2025, 509, 161350
DOI: 10.1016/j.cej.2025.161350

Synthesis and Properties of Mg-Based Foams by Infiltration Casting Without Protective Cover Gas

Viviana M. Posada, Juan Ramírez, Jean Paul Allain, Akshath R. Shetty and Patricia Fernández-Morales

J. of Materi Eng and Perform, 2020, 29, 681
DOI: 10.1007/s11665-020-04566-7

Effects of Hot Extrusion Temperature on Mechanical and Corrosion Properties of Mg-Y-Zn-Zr Biological Magnesium Alloy Containing W Phase and I Phase

Xiaofeng Wu, Chunxiang Xu, Jun Kuan, Zhengwei Zhang, Jingshan Zhang and Wenfu Yang

Materials, 2020, 13, 1147
DOI: 10.3390/ma13051147

Attaining High Functional Performance in Biodegradable Mg-Alloys: An Overview of Challenges and Prospects for the Mg-Zn-Ca System

Alexei Vinogradov, Evgeniy Merson, Pavel Myagkikh, Mikhail Linderov, Alexandr Brilevsky and Dmitry Merson

Materials, 2023, 16, 1324
DOI: 10.3390/ma16031324

In vitro and in vivo study on fine-grained Mg–Zn–RE–Zr alloy as a biodegradeable orthopedic implant produced by friction stir processing

Vasanth C. Shunmugasamy, Marwa AbdelGawad, Muhammad Umar Sohail, Talal Ibrahim, Talha Khan, Thomas Daniel Seers and Bilal Mansoor

Bioactive Materials, 2023, 28, 448
DOI: 10.1016/j.bioactmat.2023.06.010

Design of Biodegradable Magnesium Alloy Using Bi-objective Genetic Programming and Multi-objective Genetic Algorithm in Tandem

Rahul Mukherjee and Shubhabrata Datta

J. of Materi Eng and Perform, 2026, 35, 4836
DOI: 10.1007/s11665-025-11885-0

Magnesium matrix nanocomposites for orthopedic applications: A review from mechanical, corrosion, and biological perspectives

Mohammad Shahin, Khurram Munir, Cuie Wen and Yuncang Li

Acta Biomaterialia, 2019, 96, 1
DOI: 10.1016/j.actbio.2019.06.007

Enhancing the Corrosion Resistance Performance of Mg-1.8Zn-1.74Gd-0.5Y-0.4Zr Biomaterial via Solution Treatment Process

Ya Liu, Jiuba Wen, Huai Yao, Junguang He and Huan Li

Materials, 2020, 13, 836
DOI: 10.3390/ma13040836

The influence of new severe plastic deformation on microstructure, mechanical, and corrosion properties of Mg-0.8Mn-0.5Ca alloy

M. Khani, G.R. Ebrahimi, H.R. Ezatpour and A. Momeni

J min metall B Metall, 2023, 59, 515
DOI: 10.2298/JMMB200929046K

Effects of Ca concentration on degradation behavior of Zn-x Ca alloys in Hank’s solution

Yanlong Zou, Xia Chen and Bin Chen

Materials Letters, 2018, 218, 193
DOI: 10.1016/j.matlet.2018.02.018

Study of microstructural characterization & molecular dynamics evolution of temperature and strain rate effect on tensile properties of Mg-Zn-Nd alloy

Tonmoy Chowdhury, Md Zahidul Islam, Avik Muhury, Sazzad Ahmad and Fahmida Gulshan

Materials Today Communications, 2026, 50, 114496
DOI: 10.1016/j.mtcomm.2025.114496

Corrosion behavior and cytocompatibility of nano-grained AZ31 Mg alloy

W. T. Huo, X. Lin, S. Yu, Z. T. Yu, W. Zhang and Y. S. Zhang

J Mater Sci, 2019, 54, 4409
DOI: 10.1007/s10853-018-3149-8

Synthesis of Er3+-doped hydrocalumite and its strong infrared emissions

Yufeng Chen, Jiwan Zhang, Yajiao Zhang and Li Wang

J IRAN CHEM SOC, 2020, 17, 1933
DOI: 10.1007/s13738-020-01898-y

Biodegradable Mg-Zn-MgO Composites for Locking Compression Fixation Plates for Pediatric Orthopedics: Improved Mechanical Properties and Corrosion Resistance

Rajesh Jesudoss Hynes Navasingh, Daniel Asirvatham Amos, Manoj Kumar Gurunathan and Maria P. Nikolova

Processes, 2025, 13, 2077
DOI: 10.3390/pr13072077

Magnesium based implants: Alloying and coating strategies for improvement in its biomechanical and biocorrosion properties

Triloki Nath Mishra, Amaresh Kumar and Shashi Bhushan Prasad

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2025, 239, 428
DOI: 10.1177/14644207241269609

Magnesium role in additive manufacturing of biomedical implants – Challenges and opportunities

Kaushik V, Nithish Kumar B, Sakthi Kumar S and Vignesh M

Additive Manufacturing, 2022, 55, 102802
DOI: 10.1016/j.addma.2022.102802

Corrosion behaviour of AZ31 magnesium alloy containing various levels of strontium

Alireza Sadeghi, Ehsan Hasanpur, Ahmad Bahmani and Kwang Seon Shin

Corrosion Science, 2018, 141, 117
DOI: 10.1016/j.corsci.2018.06.018

Use of resorbable magnesium screws in children: Systematic review of the literature and short-term follow-up from our series

Marco Baldini, Valentino Coppa, Danya Falcioni, Elisa Senigagliesi, Mario Marinelli and Antonio Pompilio Gigante

Journal of Children's Orthopaedics, 2021, 15, 194
DOI: 10.1302/1863-2548.15.210004

On the solidification characteristics and corrosion resistance of in situ Mg–3Si–xCu composites

Milad Maleki, Massoud Emamy, Changiz Dehghanian and Hamed Mirzadeh

Vacuum, 2022, 206, 111559
DOI: 10.1016/j.vacuum.2022.111559

Analysing the characteristics of magnesium based composites for biomedical applications

Venkatesh R and Kanagasabapathy H

Materials Today: Proceedings, 2023
DOI: 10.1016/j.matpr.2023.03.039

Effect of Mn addition on the microstructure, mechanical properties and corrosion resistance of a biodegradable Mg–Gd–Zn alloy

F. Abdiyan, R. Mahmudi and H.M. Ghasemi

Materials Chemistry and Physics, 2021, 271, 124878
DOI: 10.1016/j.matchemphys.2021.124878

Constructing sodium alginate/carboxymethyl chitosan coating capable of catalytically releasing NO or CO for improving the hemocompatibility and endothelialization of magnesium alloys

Changjiang Pan, Changpeng Zuo, Jie Chen, Qiuyang Zhang, Linghong Deng, Yang Liu and Pingyun Ding

International Journal of Biological Macromolecules, 2024, 279, 135166
DOI: 10.1016/j.ijbiomac.2024.135166

Fabrication of a gradient AZ91-bioactive glass composite with good biodegradability

Pourya Motavallian, Sayed Mahmood Rabiee and Hamed Jamshidi Aval

Journal of the Mechanical Behavior of Biomedical Materials, 2023, 144, 105977
DOI: 10.1016/j.jmbbm.2023.105977

Microstructure, mechanical properties and fracture toughness of ECAPed magnesium matrix composite reinforced with hydroxyapatite ceramic particulates for bioabsorbable implants

M. Kasaeian-Naeini, M. Sedighi, R. Hashemi and H. Delavar

Ceramics International, 2023, 49, 17074
DOI: 10.1016/j.ceramint.2023.02.069

Secondary phase precipitation and thermally stable microstructure refinement induced by ECAP on Mg-Y-Nd (WN43) alloy

Marcello Cabibbo, Chiara Paoletti, Peter Minárik, Robert Král and Mária Zemková

Materials Letters, 2019, 237, 5
DOI: 10.1016/j.matlet.2018.09.107

Correlative Raman Spectroscopy–SEM Investigations of Sintered Magnesium–Calcium Alloys for Biomedical Applications

Eshwara Nidadavolu, Martin Mikulics, Martin Wolff, Thomas Ebel, Regine Willumeit-Römer, Berit Zeller-Plumhoff, Joachim Mayer and Hilde Helen Hardtdegen

Materials, 2025, 18, 3873
DOI: 10.3390/ma18163873

Microstructure characterization and corrosion behavior of Mg–Y–Zn alloys with different long period stacking ordered structures

Lisha Wang, Jinghua Jiang, Huan Liu, Bassiouny Saleh and Aibin Ma

Journal of Magnesium and Alloys, 2020, 8, 1208
DOI: 10.1016/j.jma.2019.12.009

Composition Design and Nanoindentation Studies on Mg-Ca-Zn Metallic Glass

Yogesh Prabhu, S. Vincent, Adithya Nair, Wan Kim, E. S. Park and Jatin Bhatt

Metall Mater Trans A, 2022, 53, 1419
DOI: 10.1007/s11661-022-06602-8

Accelerated discovery of magnesium intermetallic compounds with sluggish corrosion cathodic reactions through active learning and DFT calculations

Yaowei Wang, Qingli Tang, Xinchen Xu, Paul Weng, Tao Ying, Yao Yang, Xiaoqin Zeng and Hong Zhu

Acta Materialia, 2023, 255, 119063
DOI: 10.1016/j.actamat.2023.119063

Critical review on biodegradable and biocompatibility magnesium alloys: Progress and prospects in bio-implant applications

Jashanpreet Singh, Abdul Wahab Hashmi, Shadab Ahmad and Yebing Tian

Inorganic Chemistry Communications, 2024, 169, 113111
DOI: 10.1016/j.inoche.2024.113111