3D-printing technologies for electrochemical applications

Adriano Ambrosi and Martin Pumera

Chem. Soc. Rev., 2016, 45, 2740
DOI: 10.1039/C5CS00714C

How to print a crystal structure model in 3D

Teng-Hao Chen, Semin Lee, Amar H. Flood and Ognjen Š. Miljanić

CrystEngComm, 2014, 16, 5488
DOI: 10.1039/C4CE00371C

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors

Cesar Parra-Cabrera, Clement Achille, Simon Kuhn and Rob Ameloot

Chem. Soc. Rev., 2018, 47, 209
DOI: 10.1039/C7CS00631D

Rapid production of cyclonic spray chambers for inductively coupled plasma applications using low cost 3D printer technology

David F. Thompson

J. Anal. At. Spectrom., 2014, 29, 2262
DOI: 10.1039/C4JA00291A

3D printed flow plates for the electrolysis of water: an economic and adaptable approach to device manufacture

Greig Chisholm, Philip J. Kitson, Niall D. Kirkaldy, Leanne G. Bloor and Leroy Cronin

Energy Environ. Sci., 2014, 7, 3026
DOI: 10.1039/C4EE01426J

3D printed microfluidic devices with integrated versatile and reusable electrodes

Jayda L. Erkal, Asmira Selimovic, Bethany C. Gross, Sarah Y. Lockwood, Eric L. Walton, Stephen McNamara, R. Scott Martin and Dana M. Spence

Lab Chip, 2014, 14, 2023
DOI: 10.1039/C4LC00171K

Thermokinetic analyses of metal-sensitive reactions in a ceramic flow calorimeter

Soritz S., Sommitsch A., Irndorfer S., Brouczek D., Schwentenwein M., Priestley I. J. G., Iosub A. V., Krieger J. P. and Gruber-Woelfler H.

React. Chem. Eng., 2024, 9, 1805
DOI: 10.1039/D4RE00014E

Democratizing self-driving labs: advances in low-cost 3D printing for laboratory automation

Sayan Doloi, Maloy Das, Yujia Li, Zen Han Cho, Xingchi Xiao, John V. Hanna, Matthew Osvaldo and Leonard Ng Wei Tat

Digital Discovery, 2025, 4, 1685
DOI: 10.1039/D4DD00411F

Design and development of 3D printed catalytically-active stirrers for chemical synthesis

Matthew R. Penny and Stephen T. Hilton

React. Chem. Eng., 2020, 5, 853
DOI: 10.1039/C9RE00492K

Combining additive manufacturing and catalysis: a review

C. Hurt, M. Brandt, S. S. Priya, T. Bhatelia, J. Patel, PR. Selvakannan and S. Bhargava

Catal. Sci. Technol., 2017, 7, 3421
DOI: 10.1039/C7CY00615B

Design and 3D printing of a stainless steel reactor for continuous difluoromethylations using fluoroform

Bernhard Gutmann, Manuel Köckinger, Gabriel Glotz, Tania Ciaglia, Eyke Slama, Matej Zadravec, Stefan Pfanner, Manuel C. Maier, Heidrun Gruber-Wölfler and C. Oliver Kappe

React. Chem. Eng., 2017, 2, 919
DOI: 10.1039/C7RE00176B

3D printed microfluidic devices: enablers and barriers

Sidra Waheed, Joan M. Cabot, Niall P. Macdonald, Trevor Lewis, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Lab Chip, 2016, 16, 1993
DOI: 10.1039/C6LC00284F

3D printed tetrakis(triphenylphosphine)palladium (0) impregnated stirrer devices for Suzuki–Miyaura cross-coupling reactions

Matthew R. Penny, Zenobia X. Rao, Rumintha Thavarajah, Ahtsham Ishaq, Benjamin J. Bowles and Stephen T. Hilton

React. Chem. Eng., 2023, 8, 752
DOI: 10.1039/D2RE00218C

3D-printing for electrolytic processes and electrochemical flow systems

Adriano Ambrosi, Raymond Rong Sheng Shi and Richard D. Webster

J. Mater. Chem. A, 2020, 8, 21902
DOI: 10.1039/D0TA07939A

Design and additive manufacture for flow chemistry

Andrew J. Capel, Steve Edmondson, Steven D. R. Christie, Ruth D. Goodridge, Richard J. Bibb and Matthew Thurstans

Lab Chip, 2013, 13, 4583
DOI: 10.1039/c3lc50844g

Finger-powered fluidic actuation and mixing via MultiJet 3D printing

Eric Sweet, Rudra Mehta, Yifan Xu, Ryan Jew, Rachel Lin and Liwei Lin

Lab Chip, 2020, 20, 3375
DOI: 10.1039/D0LC00488J

Sonogashira coupling in 3D-printed NMR cuvettes: synthesis and properties of arylnaphthylalkynes

Felix Lederle, Frederick Meyer, Christian Kaldun, Jan C. Namyslo and Eike G. Hübner

New J. Chem., 2017, 41, 1925
DOI: 10.1039/C6NJ03614G

Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing

Feng Li, Niall P. Macdonald, Rosanne M. Guijt and Michael C. Breadmore

Lab Chip, 2019, 19, 35
DOI: 10.1039/C8LC00826D

Hybrid single-chain nanoparticles via the metal induced crosslinking of N-donor functionalized polymer chains

Karen Freytag, Stefanie Säfken, Kai Wolter, Jan C. Namyslo and Eike G. Hübner

Polym. Chem., 2017, 8, 7546
DOI: 10.1039/C7PY01487B

From 3D to 4D printing: a reactor for photochemical experiments using hybrid polyurethane acrylates for vat-based polymerization and surface functionalization

Anne Hansen, Melissa Renner, Axel G. Griesbeck and Thomas Büsgen

Chem. Commun., 2020, 56, 15161
DOI: 10.1039/D0CC06512A

High density 3D printed microfluidic valves, pumps, and multiplexers

Hua Gong, Adam T. Woolley and Gregory P. Nordin

Lab Chip, 2016, 16, 2450
DOI: 10.1039/C6LC00565A

Microscale Computed Tomography (μCT) Imaging of Leak Pathways for Optimized Leak-Free 3D Printed Fluidics

Rowan Leeder, Kathryn E. Rankin and Adrian M. Nightingale

ACS Appl. Polym. Mater., 2025, 7, 14130
DOI: 10.1021/acsapm.5c02274

Batch Scale Production of 3D Printed Extraction Sorbents Using a Low-Cost Modification to a Desktop Printer

Shu-An Hsieh, Danial Shamsaei, Iran Ocaña-Rios and Jared L. Anderson

Anal. Chem., 2023, 95, 13417
DOI: 10.1021/acs.analchem.3c02679

Fume emissions from a low-cost 3-D printer with various filaments

Evan L. Floyd, Jun Wang and James L. Regens

Journal of Occupational and Environmental Hygiene, 2017, 14, 523
DOI: 10.1080/15459624.2017.1302587

A review of 3D-printed sensors

Yujie Ni, Ru Ji, Kaiwen Long, Ting Bu, Kejian Chen and Songlin Zhuang

Applied Spectroscopy Reviews, 2017, 52, 623
DOI: 10.1080/05704928.2017.1287082

3D printed microfluidic devices with integrated valves

Chad I. Rogers, Kamran Qaderi, Adam T. Woolley and Gregory P. Nordin

Biomicrofluidics, 2015, 9
DOI: 10.1063/1.4905840

Chemistry from 3D printed objects

Matthew R. Hartings and Zeeshan Ahmed

Nat Rev Chem, 2019, 3, 305
DOI: 10.1038/s41570-019-0097-z

Designing Algorithms To Aid Discovery by Chemical Robots

Alon B. Henson, Piotr S. Gromski and Leroy Cronin

ACS Cent. Sci., 2018, 4, 793
DOI: 10.1021/acscentsci.8b00176

3D-Printed Fluidic Devices for Nanoparticle Preparation and Flow-Injection Amperometry Using Integrated Prussian Blue Nanoparticle-Modified Electrodes

Gregory W. Bishop, Jennifer E. Satterwhite, Snehasis Bhakta, Karteek Kadimisetty, Kelsey M. Gillette, Eric Chen and James F. Rusling

Anal. Chem., 2015, 87, 5437
DOI: 10.1021/acs.analchem.5b00903

Fabrication of a Malaria-Ab ELISA Bioassay Platform with Utilization of Syringe-Based and 3D Printed Assay Automation

Christopher Lim, Yangchung Lee and Lawrence Kulinsky

Micromachines, 2018, 9, 502
DOI: 10.3390/mi9100502

Global value chains from a 3D printing perspective

André O Laplume, Bent Petersen and Joshua M Pearce

J Int Bus Stud, 2016, 47, 595
DOI: 10.1057/jibs.2015.47

Modulares Mikroreaktorsystem aus ultraschallheißgeprägten Polymerfolien

Alexander Tollkötter, Johannes Sackmann, Tobias Baldhoff, Werner Karl Schomburg and Norbert Kockmann

Chemie Ingenieur Technik, 2015, 87, 823
DOI: 10.1002/cite.201400146

Reusable, 3D-printed, peroxidase mimic–incorporating multi-well plate for high-throughput glucose determination

Cheng-Kuan Su and Jo-Chin Chen

Sensors and Actuators B: Chemical, 2017, 247, 641
DOI: 10.1016/j.snb.2017.03.054

3D-Printed Acrylonitrile Butadiene Styrene-Metal Organic Framework Composite Materials and Their Gas Storage Properties

Michael Bible, Makfir Sefa, James A. Fedchak, Julia Scherschligt, Bharath Natarajan, Zeeshan Ahmed and Matthew R. Hartings

3D Printing and Additive Manufacturing, 2018, 5, 63
DOI: 10.1089/3dp.2017.0067

Inkjet 3D printing of microfluidic structures—on the selection of the printer towards printing your own microfluidic chips

Rafał Walczak and Krzysztof Adamski

J. Micromech. Microeng., 2015, 25, 085013
DOI: 10.1088/0960-1317/25/8/085013

WITHDRAWN: DrugPrinter: print any drug instantly

Calvin Yu-Chian Chen

Drug Discovery Today, 2014
DOI: 10.1016/j.drudis.2014.03.027

Direct 3D Printing of Catalytically Active Structures

J. Sebastián Manzano, Zachary B. Weinstein, Aaron D. Sadow and Igor I. Slowing

ACS Catal., 2017, 7, 7567
DOI: 10.1021/acscatal.7b02111

Effect of post-processing conditions on polyacrylate materials used in stereolithography

Ivan Karlo Cingesar, Marijan-Pere Marković and Domagoj Vrsaljko

Additive Manufacturing, 2022, 55, 102813
DOI: 10.1016/j.addma.2022.102813

A 3D Printer in the Lab: Not Only a Toy

Vittorio Saggiomo

Advanced Science, 2022, 9
DOI: 10.1002/advs.202202610

An open-source approach to automation in organic synthesis: The flow chemical formation of benzamides using an inline liquid-liquid extraction system and a homemade 3-axis autosampling/product-collection device

Matthew O'Brien, April Hall, John Schrauwen and Joyce van der Made

Tetrahedron, 2018, 74, 3152
DOI: 10.1016/j.tet.2018.02.043

3D‐Printed Polypropylene Continuous‐Flow Column Reactors: Exploration of Reactor Utility in SNAr Reactions and the Synthesis of Bicyclic and Tetracyclic Heterocycles

Zenobia X. Rao, Bhaven Patel, Alessandra Monaco, Zi Jing Cao, Marta Barniol‐Xicota, Enora Pichon, Mark Ladlow and Stephen T. Hilton

Eur J Org Chem, 2017, 2017, 6499
DOI: 10.1002/ejoc.201701111

Direct ink writing of Pd-Decorated Al2O3 ceramic based catalytic reduction continuous flow reactor

Xin Xu, Mengxing Zhang, Pan Jiang, Desheng Liu, Yixian Wang, Xing Xu, Zhongying Ji, Xin Jia, Haizhong Wang and Xiaolong Wang

Ceramics International, 2022, 48, 10843
DOI: 10.1016/j.ceramint.2021.12.301

In-situ time resolved spectrographic measurement using an additively manufactured metallic micro-fluidic analysis platform

T. W. Monaghan, M. J. Harding, S. D. R. Christie, R. J. Friel and Russell Goodall

PLoS ONE, 2019, 14, e0224492
DOI: 10.1371/journal.pone.0224492

One-step three-dimensional printing of enzyme/substrate–incorporated devices for glucose testing

Cheng-Kuan Su and Jo-Chin Chen

Analytica Chimica Acta, 2018, 1036, 133
DOI: 10.1016/j.aca.2018.06.073

Automated 3-D Printed Arrays to Evaluate Genotoxic Chemistry: E-Cigarettes and Water Samples

Karteek Kadimisetty, Spundana Malla and James F. Rusling

ACS Sens., 2017, 2, 670
DOI: 10.1021/acssensors.7b00118

Sustainable Materials and Chemical Processes for Additive Manufacturing

Eva Sanchez-Rexach, Trevor G. Johnston, Coralie Jehanno, Haritz Sardon and Alshakim Nelson

Chem. Mater., 2020, 32, 7105
DOI: 10.1021/acs.chemmater.0c02008

Additive Manufacturing Technologies: 3D Printing in Organic Synthesis

Sergio Rossi, Alessandra Puglisi and Maurizio Benaglia

ChemCatChem, 2018, 10, 1512
DOI: 10.1002/cctc.201701619

3D printing: It’s microfluidic functions and environmental impacts

Abhishek Sharma, Surajit Mondal, Amit Kumar Mondal, Soumadeep Baksi, Ravi Kumar Patel, Won-Shik Chu and Jitendra K. Pandey

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2017, 4, 323
DOI: 10.1007/s40684-017-0038-6

Organische Synthese: Vormarsch der Maschinen

Steven V. Ley, Daniel E. Fitzpatrick, Richard. J. Ingham and Rebecca M. Myers

Angewandte Chemie, 2015, 127, 3514
DOI: 10.1002/ange.201410744

Models of water, methanol, and ethanol and their applications in the design of miniature microwave heating reactors

S.V. Kapranov and G.A. Kouzaev

International Journal of Thermal Sciences, 2017, 122, 53
DOI: 10.1016/j.ijthermalsci.2017.08.007

The rise of 3D printing and the role of user firms in the U.S.: evidence from patent data

Jongmin Choi

Technology Analysis & Strategic Management, 2018, 30, 1195
DOI: 10.1080/09537325.2018.1458979

A novel electroporation system for efficient molecular delivery into Chlamydomonas reinhardtii with a 3-dimensional microelectrode

Seongsu Kang, Kwon-Ho Kim and Yeu-Chun Kim

Sci Rep, 2015, 5
DOI: 10.1038/srep15835

Open-Source 3-D Platform for Low-Cost Scientific Instrument Ecosystem

C. Zhang, B. Wijnen and J.M. Pearce

SLAS Technology, 2016, 21, 517
DOI: 10.1177/2211068215624406

Continuous Flow Hydrogenation of Flavorings and Fragrances Using 3D-Printed Catalytic Static Mixers

Milan Kundra, Tom Grall, Derrick Ng, Zongli Xie and Christian H. Hornung

Ind. Eng. Chem. Res., 2021, 60, 1989
DOI: 10.1021/acs.iecr.0c05671

Oral disintegrating patient-tailored tablets of warfarin sodium produced by 3D printing

Pan Tian, Fan Yang, Yuan Xu, Min-Mei Lin, Li-Ping Yu, Wei Lin, Qi-Feng Lin, Zhu-Fen Lv, Si-Yu Huang and Yan-Zhong Chen

Drug Development and Industrial Pharmacy, 2018, 44, 1918
DOI: 10.1080/03639045.2018.1503291

Initiator-Integrated 3D Printing Enables the Formation of Complex Metallic Architectures

Xiaolong Wang, Qiuquan Guo, Xiaobing Cai, Shaolin Zhou, Brad Kobe and Jun Yang

ACS Appl. Mater. Interfaces, 2014, 6, 2583
DOI: 10.1021/am4050822

Three‐dimensional Printing for Catalytic Applications: Current Status and Perspectives

Xintong Zhou and Chang‐jun Liu

Adv Funct Materials, 2017, 27
DOI: 10.1002/adfm.201701134

3D Printing in pharmaceutical manufacturing: Current status and future prospects

Niha Sultana, Asad Ali, Ayesha Waheed and Mohd. Aqil

Materials Today Communications, 2024, 38, 107987
DOI: 10.1016/j.mtcomm.2023.107987

Recent advances in 3D printing for catalytic applications

Jie Zhu, Peiwen Wu, Yanhong Chao, Jiangtao Yu, Wenshuai Zhu, Zhichang Liu and Chunming Xu

Chemical Engineering Journal, 2022, 433, 134341
DOI: 10.1016/j.cej.2021.134341

Ammonia decomposition over 3D-printed CeO2 structures loaded with Ni

Ilaria Lucentini, Isabel Serrano, Lluís Soler, Núria J. Divins and Jordi Llorca

Applied Catalysis A: General, 2020, 591, 117382
DOI: 10.1016/j.apcata.2019.117382

3D‐Printing inside the Glovebox: A Versatile Tool for Inert‐Gas Chemistry Combined with Spectroscopy

Felix Lederle, Christian Kaldun, Jan C. Namyslo and Eike G. Hübner

Helvetica Chimica Acta, 2016, 99, 255
DOI: 10.1002/hlca.201500502

3D‐Printed Acidic Monolithic Catalysts for Liquid‐Phase Catalysis with Enhanced Mass Transfer Properties

Sebastian Hock, Christof Rein and Marcus Rose

ChemCatChem, 2022, 14
DOI: 10.1002/cctc.202101947

Glass transition temperatures, melting temperatures, water contact angles and dimensional precision of simple fused deposition model 3D prints and 3D printed channels constructed from a range of commercially available filaments

Elaheh Sirjani, Peter J. Cragg and Marcus K. Dymond

Chemical Data Collections, 2019, 22, 100244
DOI: 10.1016/j.cdc.2019.100244

Modular 3D Printed Compressed Air Driven Continuous‐Flow Systems for Chemical Synthesis

Matthew R. Penny, Zenobia X. Rao, Bruno Felício Peniche and Stephen T. Hilton

Eur J Org Chem, 2019, 2019, 3783
DOI: 10.1002/ejoc.201900423

Chemical compatibility of fused filament fabrication-based 3-D printed components with solutions commonly used in semiconductor wet processing

Ismo T.S. Heikkinen, Christoffer Kauppinen, Zhengjun Liu, Sanja M. Asikainen, Steven Spoljaric, Jukka V. Seppälä, Hele Savin and Joshua M. Pearce

Additive Manufacturing, 2018, 23, 99
DOI: 10.1016/j.addma.2018.07.015

3D Printed High‐Throughput Hydrothermal Reactionware for Discovery, Optimization, and Scale‐Up

Philip J. Kitson, Ross J. Marshall, Deliang Long, Ross S. Forgan and Leroy Cronin

Angew Chem Int Ed, 2014, 53, 12723
DOI: 10.1002/anie.201402654

A review on additive manufacturing and materials for catalytic applications: Milestones, key concepts, advances and perspectives

O.H. Laguna, P.F. Lietor, F.J. Iglesias Godino and F.A. Corpas-Iglesias

Materials & Design, 2021, 208, 109927
DOI: 10.1016/j.matdes.2021.109927

Digitization of multistep organic synthesis in reactionware for on-demand pharmaceuticals

Philip J. Kitson, Guillaume Marie, Jean-Patrick Francoia, Sergey S. Zalesskiy, Ralph C. Sigerson, Jennifer S. Mathieson and Leroy Cronin

Science, 2018, 359, 314
DOI: 10.1126/science.aao3466

Digital Control of Multistep Hydrothermal Synthesis by Using 3D Printed Reactionware for the Synthesis of Metal–Organic Frameworks

Chang‐Gen Lin, Wei Zhou, Xue‐Ting Xiong, Weimin Xuan, Philip J. Kitson, De‐Liang Long, Wei Chen, Yu‐Fei Song and Leroy Cronin

Angew Chem Int Ed, 2018, 57, 16716
DOI: 10.1002/anie.201810095

High-Complexity WO3-Based Catalyst with Multi-Catalytic Species via 3D Printing

Xiaofeng Wang, Wei Guo, Raed Abu-Reziq and Shlomo Magdassi

Catalysts, 2020, 10, 840
DOI: 10.3390/catal10080840

Fully 3D-Printed Preconcentrator for Selective Extraction of Trace Elements in Seawater

Cheng-Kuan Su, Pei-Jin Peng and Yuh-Chang Sun

Anal. Chem., 2015, 87, 6945
DOI: 10.1021/acs.analchem.5b01599

One-Step Fabrication of a Microfluidic Device with an Integrated Membrane and Embedded Reagents by Multimaterial 3D Printing

Feng Li, Petr Smejkal, Niall P. Macdonald, Rosanne M. Guijt and Michael C. Breadmore

Anal. Chem., 2017, 89, 4701
DOI: 10.1021/acs.analchem.7b00409

Trace multi-class organic explosives analysis in complex matrices enabled using LEGO®-inspired clickable 3D-printed solid phase extraction block arrays

Rachel C. Irlam, Cian Hughes, Mark C. Parkin, Matthew S. Beardah, Michael O'Donnell, Dermot Brabazon and Leon P. Barron

Journal of Chromatography A, 2020, 1629, 461506
DOI: 10.1016/j.chroma.2020.461506

Accessing microfluidics through feature-based design software for 3D printing

Peter G. Shankles, Larry J. Millet, Jayde A. Aufrecht, Scott T. Retterer and David T. Eddington

PLoS ONE, 2018, 13, e0192752
DOI: 10.1371/journal.pone.0192752

Current and future impact of 3D printing on the separation sciences

Umme Kalsoom, Pavel N. Nesterenko and Brett Paull

TrAC Trends in Analytical Chemistry, 2018, 105, 492
DOI: 10.1016/j.trac.2018.06.006

Additive manufacturing of intricate and inherently photocatalytic flow reactor components

Adilet Zhakeyev, Mary C. Jones, Christopher G. Thomson, John M. Tobin, Huizhi Wang, Filipe Vilela and Jin Xuan

Additive Manufacturing, 2021, 38, 101828
DOI: 10.1016/j.addma.2020.101828

Additive Manufacturing of Sensors: A Comprehensive Review

Md Jarir Hossain, Bahareh Tavousi Tabatabaei, Mazen Kiki and Jae-Won Choi

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2025, 12, 277
DOI: 10.1007/s40684-024-00629-5

30 years of microfluidics

Neil Convery and Nikolaj Gadegaard

Micro and Nano Engineering, 2019, 2, 76
DOI: 10.1016/j.mne.2019.01.003

3D Printing for Chemical Process Laboratories II: Measuring Liquid‐Solid Mass Transfer Coefficients

Marius Gerrit Gelhausen, Daniel Lenz, Fabian Krull, Vedat Korkmaz and David William Agar

Chem Eng & Technol, 2018, 41, 798
DOI: 10.1002/ceat.201700295

Finite element modeling simulation-assisted design of integrated microfluidic chips for heavy metal ion stripping analysis

Ying Hong, Jianhua Zou, Gang Ge, Wanyue Xiao, Ling Gao, Jinjun Shao and Xiaochen Dong

J. Phys. D: Appl. Phys., 2017, 50, 415303
DOI: 10.1088/1361-6463/aa84a3

Investigation of Contact Angles and Surface Morphology of 3D-Printed Materials

Johannes Neukäufer, Bernhard Seyfang and Thomas Grützner

Ind. Eng. Chem. Res., 2020, 59, 6761
DOI: 10.1021/acs.iecr.0c00430

Digital and lean development method for 3D-printed reactors based on CAD modeling and CFD simulation

Sven Bettermann, Felix Kandelhard, Hans-Ulrich Moritz and Werner Pauer

Chemical Engineering Research and Design, 2019, 152, 71
DOI: 10.1016/j.cherd.2019.09.024

A 3D-Printed Oxygen Control Insert for a 24-Well Plate

Martin D. Brennan, Megan L. Rexius-Hall, David T. Eddington and Arum Han

PLoS ONE, 2015, 10, e0137631
DOI: 10.1371/journal.pone.0137631

An Affordable Open-Source Turbidimeter

Christopher Kelley, Alexander Krolick, Logan Brunner, Alison Burklund, Daniel Kahn, William Ball and Monroe Weber-Shirk

Sensors, 2014, 14, 7142
DOI: 10.3390/s140407142

A Low-Cost Open-Source Metal 3-D Printer

Gerald C. Anzalone, Chenlong Zhang, Bas Wijnen, Paul G. Sanders and Joshua M. Pearce

IEEE Access, 2013, 1, 803
DOI: 10.1109/ACCESS.2013.2293018

Dimensional Fidelity and Orientation Effects of PolyJet Technology in 3D Printing of Negative Features for Microfluidic Applications

Michael Krause, Analise Marshall, Jeffrey K. Catterlin, Terak Hornik and Emil P. Kartalov

Micromachines, 2024, 15, 389
DOI: 10.3390/mi15030389

ChannelCOMB Device for Mesostructured Reactors and Networks of Reactors

Isabel S. O. Barbosa, João M. Costa, Yaidelin A. Manrique, Madalena M. Dias, Joaquim L. Faria, Ricardo J. Santos, Cláudia G. Silva and Margarida S. C. A. Brito

Chem Eng & Technol, 2023, 46, 1241
DOI: 10.1002/ceat.202200560

Customizable 3D-printed stirrers for investigation, optimization and scale-up processes of batch emulsion copolymerizations

Sven Bettermann, Robin Stuhr, Hans-Ulrich Moritz and Werner Pauer

Chemical Engineering Science, 2019, 206, 50
DOI: 10.1016/j.ces.2019.05.026

3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal Conductivity

Minhong He, Yan Zhao, Biao Wang, Qing Xi, Jun Zhou and Ziqi Liang

Small, 2015, 11, 5889
DOI: 10.1002/smll.201502153

Classification of challenges in 3D printing for combined electrochemical and microfluidic applications: a review

Arivarasi A. and Anand Kumar

RPJ, 2019, 25, 1328
DOI: 10.1108/RPJ-05-2018-0115

3D printed UV/VIS detection systems constructed from transparent filaments and immobilised enzymes

Elaheh Sirjani, Maciej Migas, Peter J. Cragg and Marcus K. Dymond

Additive Manufacturing, 2020, 33, 101094
DOI: 10.1016/j.addma.2020.101094

Open-Source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics

J.M. Pearce, N.C. Anzalone and C.L. Heldt

SLAS Technology, 2016, 21, 510
DOI: 10.1177/2211068215624408

3D Printed Reactionware for Synthetic Electrochemistry with Hydrogen Fluoride Reagents

David M. Heard, Sayad Doobary and Alastair J. J. Lennox

ChemElectroChem, 2021, 8, 2070
DOI: 10.1002/celc.202100496

Harnessing open-source technology for low-cost automation in synthesis: Flow chemical deprotection of silyl ethers using a homemade autosampling system

Matthew O'Brien, Lisette Konings, Matthew Martin and Jordan Heap

Tetrahedron Letters, 2017, 58, 2409
DOI: 10.1016/j.tetlet.2017.05.008

Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review

Daniela Pranzo, Piero Larizza, Daniel Filippini and Gianluca Percoco

Micromachines, 2018, 9, 374
DOI: 10.3390/mi9080374

Open‐ESyn: A 3D‐Printed Toolkit for Expanded ElectraSyn Functionality and Reproducibility for Electrosynthesis

Anthony Choi, David M. Heard, Calum S. Haydon and Alastair J. J. Lennox

ChemElectroChem, 2024, 11
DOI: 10.1002/celc.202400454

Continuous emulsion copolymerization processes at mild conditions in a 3D-printed tubular bended reactor

Sven Bettermann, Baldur Schroeter, Hans-Ulrich Moritz, Werner Pauer, Marcel Fassbender and Gerrit A. Luinstra

Chemical Engineering Journal, 2018, 338, 311
DOI: 10.1016/j.cej.2018.01.038

Photocatalytic NOx removal with TiO2-impregnated 3D-printed PET supports

G.F. Binetti Basterrechea, V.N. Montesinos and N. Quici

Heliyon, 2023, 9, e22635
DOI: 10.1016/j.heliyon.2023.e22635

A Review of Current Methods in Microfluidic Device Fabrication and Future Commercialization Prospects

Bruce K. Gale, Alexander R. Jafek, Christopher J. Lambert, Brady L. Goenner, Hossein Moghimifam, Ugochukwu C. Nze and Suraj Kumar Kamarapu

Inventions, 2018, 3, 60
DOI: 10.3390/inventions3030060

The digital code driven autonomous synthesis of ibuprofen automated in a 3D-printer-based robot

Philip J Kitson, Stefan Glatzel and Leroy Cronin

Beilstein J. Org. Chem., 2016, 12, 2776
DOI: 10.3762/bjoc.12.276

Tangible visualization of molecular dynamics simulations using 3-D printing

Jason E. Bara, C. Heath Turner, Zhongtao Zhang and Christopher I. Hawkins

Education for Chemical Engineers, 2015, 13, 9
DOI: 10.1016/j.ece.2015.07.001

3D-Printed High-Density Droplet Array Chip for Miniaturized Protein Crystallization Screening under Vapor Diffusion Mode

Yi-Ran Liang, Li-Na Zhu, Jie Gao, Hong-Xia Zhao, Ying Zhu, Sheng Ye and Qun Fang

ACS Appl. Mater. Interfaces, 2017, 9, 11837
DOI: 10.1021/acsami.6b15933

Chemical and biochemical analysis on lab-on-a-chip devices fabricated using three-dimensional printing

Yan Zhang, Shenguang Ge and Jinghua Yu

TrAC Trends in Analytical Chemistry, 2016, 85, 166
DOI: 10.1016/j.trac.2016.09.008

The chemical, mechanical, and physical properties of 3D printed materials composed of TiO 2 -ABS nanocomposites

Matthew R. Skorski, Jake M. Esenther, Zeeshan Ahmed, Abigail E. Miller and Matthew R. Hartings

Science and Technology of Advanced Materials, 2016, 17, 89
DOI: 10.1080/14686996.2016.1152879

Enabling Process Intensification by 3 D Printing of Catalytic Structures

Muxina Konarova, Waqas Aslam, Lei Ge, Qing Ma, Fengqiu Tang, Victor Rudolph and Jorge Norberto Beltramini

ChemCatChem, 2017, 9, 4132
DOI: 10.1002/cctc.201700829

3D printing for CO2 capture and chemical engineering design

Jason E. Bara, Christopher I. Hawkins, David T. Neuberger and Samuel W. Poppell

Nanomaterials and Energy, 2013, 2, 235
DOI: 10.1680/nme/13.00021

Coaxial 3D printed Al2O3 ceramic continuous-flow fixed-bed reactor with bionic core-shell structure

Shengcai Wu, Xin Xu, Yixian Wang, Pan Jiang, Jiayu Wu, Xin Jia, Desheng Liu, Xiaolong Wang and Zhongying Ji

Ceramics International, 2024, 50, 13662
DOI: 10.1016/j.ceramint.2024.01.280

A low volume 3D-printed temperature-controllable cuvette for UV visible spectroscopy

Jelena Pisaruka and Marcus K. Dymond

Analytical Biochemistry, 2016, 510, 52
DOI: 10.1016/j.ab.2016.07.019

Digital Control of Multistep Hydrothermal Synthesis by Using 3D Printed Reactionware for the Synthesis of Metal–Organic Frameworks

Chang‐Gen Lin, Wei Zhou, Xue‐Ting Xiong, Weimin Xuan, Philip J. Kitson, De‐Liang Long, Wei Chen, Yu‐Fei Song and Leroy Cronin

Angewandte Chemie, 2018, 130, 16958
DOI: 10.1002/ange.201810095

A Review on New 3-D Printed Materials’ Geometries for Catalysis and Adsorption: Paradigms from Reforming Reactions and CO2 Capture

Ahmad Soliman, Nahla AlAmoodi, Georgios N. Karanikolos, Charalabos C. Doumanidis and Kyriaki Polychronopoulou

Nanomaterials, 2020, 10, 2198
DOI: 10.3390/nano10112198

Reshaping drug development using 3D printing

Atheer Awad, Sarah J. Trenfield, Alvaro Goyanes, Simon Gaisford and Abdul W. Basit

Drug Discovery Today, 2018, 23, 1547
DOI: 10.1016/j.drudis.2018.05.025

Rapid Prototyping for Photochemical Reaction Engineering

Fabian Guba, Ümit Tastan, Katrin Gugeler, Melanie Buntrock, Tobias Rommel and Dirk Ziegenbalg

Chemie Ingenieur Technik, 2019, 91, 17
DOI: 10.1002/cite.201800035

3D Printing in Heterogeneous Catalysis—The State of the Art

Elżbieta Bogdan and Piotr Michorczyk

Materials, 2020, 13, 4534
DOI: 10.3390/ma13204534

3D printing synthesis of catalysts

Xianhui Zhao, Canan Karakaya, Moriko Qian, Rongge Zou, Weijie Zhang, Zhou Lu, Debtanu Maiti, Avik Samanta, Weiming Wan, Xiangbei Liu, Anisia Tiplea, Yan Li, Shaoqing Cui, Chenxi Wang, Hanwu Lei, Sherith Bankston, Sefa Yilmaz, Jingguang G. Chen and Soydan Ozcan

Materials Today Sustainability, 2024, 26, 100746
DOI: 10.1016/j.mtsust.2024.100746

Bringing Crystal Structures to Reality by Three-Dimensional Printing

Philip J. Kitson, Andrew Macdonell, Soichiro Tsuda, HongYing Zang, De-Liang Long and Leroy Cronin

Crystal Growth & Design, 2014, 14, 2720
DOI: 10.1021/cg5003012

Engineering chemistry for the future of chemical synthesis

D.E. Fitzpatrick and S.V. Ley

Tetrahedron, 2018, 74, 3087
DOI: 10.1016/j.tet.2017.08.050

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Evgeniy G. Gordeev and Valentine P. Ananikov

Russ. Chem. Rev., 2020, 89, 1507
DOI: 10.1070/RCR4980

ERCAD: A Parametric Reactor Design Tool That Enables Rapid Prototyping and Optimization of Electrochemical Reactors through 3D Printing

David M. Heard, Sam W. Deeks and Alastair J. J. Lennox

ACS Cent. Sci., 2024, 10, 2028
DOI: 10.1021/acscentsci.4c00988

3D‐Structured Monoliths of Nanoporous Polymers by Additive Manufacturing

Sebastian Hock and Marcus Rose

Chemie Ingenieur Technik, 2020, 92, 525
DOI: 10.1002/cite.201900149

Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences

Bethany C. Gross, Jayda L. Erkal, Sarah Y. Lockwood, Chengpeng Chen and Dana M. Spence

Anal. Chem., 2014, 86, 3240
DOI: 10.1021/ac403397r

Design Paradigm Utilizing Reversible Diels–Alder Reactions to Enhance the Mechanical Properties of 3D Printed Materials

Joshua R. Davidson, Gayan A. Appuhamillage, Christina M. Thompson, Walter Voit and Ronald A. Smaldone

ACS Appl. Mater. Interfaces, 2016, 8, 16961
DOI: 10.1021/acsami.6b05118

Review of 3D-Printed functionalized devices for chemical and biochemical analysis

Cheng-Kuan Su

Analytica Chimica Acta, 2021, 1158, 338348
DOI: 10.1016/j.aca.2021.338348

Synthesis, Stability, and Diels‐Alder Reactions of Methyl 2‐Oxobut‐3‐enoate

Bo M. Jessen, Esben Taarning and Robert Madsen

Eur J Org Chem, 2021, 2021, 4049
DOI: 10.1002/ejoc.202100370

Heterogeneous photocatalysis in flow chemical reactors

Christopher G Thomson, Ai-Lan Lee and Filipe Vilela

Beilstein J. Org. Chem., 2020, 16, 1495
DOI: 10.3762/bjoc.16.125

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

Yong He, Yan Wu, Jian‐zhong Fu, Qing Gao and Jing‐jiang Qiu

Electroanalysis, 2016, 28, 1658
DOI: 10.1002/elan.201600043

Development of Lab-Scale Continuous Stirred-Tank Reactor as Flow Process Tool for Oxidation Reactions Using Molecular Oxygen

Ursina Gnädinger, Dario Poier, Claudio Trombini, Michal Dabros and Roger Marti

Org. Process Res. Dev., 2024, 28, 1860
DOI: 10.1021/acs.oprd.3c00424

Current and future trends of additive manufacturing for chemistry applications: a review

Oyekunle Azeez Alimi and Reinout Meijboom

J Mater Sci, 2021, 56, 16824
DOI: 10.1007/s10853-021-06362-7

Precise 2D‐Patterned Incompatible Catalysts for Reactions in One‐Pot

Martin O. Pretscher, Tingting Chen, Gabriel Sitaru, Stephan Gekle, Jian Ji and Seema Agarwal

Chemistry A European J, 2019, 25, 13640
DOI: 10.1002/chem.201903486

A Portable 3D Printer System for the Diagnosis and Treatment of Multidrug-Resistant Bacteria

Stefan Glatzel, Mohammed Hezwani, Philip J. Kitson, Piotr S. Gromski, Sophie Schürer and Leroy Cronin

Chem, 2016, 1, 494
DOI: 10.1016/j.chempr.2016.08.008

A state-of-the-art review on energy consumption and quality characteristics in metal additive manufacturing processes

Arfan Majeed, Altaf Ahmed, Jingxiang Lv, Tao Peng and Muhammad Muzamil

J Braz. Soc. Mech. Sci. Eng., 2020, 42
DOI: 10.1007/s40430-020-02323-4

Modelling and simulation of catalytic ammonia decomposition over Ni-Ru deposited on 3D-printed CeO2

Ilaria Lucentini, Germán García Colli, Carlos Luzi, Isabel Serrano, Lluís Soler, Núria J. Divins, Osvaldo Miguel Martínez and Jordi Llorca

Chemical Engineering Journal, 2022, 427, 131756
DOI: 10.1016/j.cej.2021.131756

Fully 3D printed integrated reactor array for point-of-care molecular diagnostics

Karteek Kadimisetty, Jinzhao Song, Aoife M. Doto, Young Hwang, Jing Peng, Michael G. Mauk, Frederic D. Bushman, Robert Gross, Joseph N. Jarvis and Changchun Liu

Biosensors and Bioelectronics, 2018, 109, 156
DOI: 10.1016/j.bios.2018.03.009

3D Printed High‐Throughput Hydrothermal Reactionware for Discovery, Optimization, and Scale‐Up

Philip J. Kitson, Ross J. Marshall, Deliang Long, Ross S. Forgan and Leroy Cronin

Angewandte Chemie, 2014, 126, 12937
DOI: 10.1002/ange.201402654

Open-Source Syringe Pump Library

Bas Wijnen, Emily J. Hunt, Gerald C. Anzalone, Joshua M. Pearce and Giorgio F. Gilestro

PLoS ONE, 2014, 9, e107216
DOI: 10.1371/journal.pone.0107216

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta and Subha N. Rath

Bio-des. Manuf., 2021, 4, 311
DOI: 10.1007/s42242-020-00112-5

Organic Synthesis: March of the Machines

Steven V. Ley, Daniel E. Fitzpatrick, Richard. J. Ingham and Rebecca M. Myers

Angew Chem Int Ed, 2015, 54, 3449
DOI: 10.1002/anie.201410744

Polyoxometalates on Functional Substrates: Concepts, Synergies, and Future Perspectives

Alexey S. Cherevan, Sreejith P. Nandan, Isolda Roger, Rongji Liu, Carsten Streb and Dominik Eder

Advanced Science, 2020, 7
DOI: 10.1002/advs.201903511

Toward autonomous laboratories: Convergence of artificial intelligence and experimental automation

Yunchao Xie, Kianoosh Sattari, Chi Zhang and Jian Lin

Progress in Materials Science, 2023, 132, 101043
DOI: 10.1016/j.pmatsci.2022.101043

Customizable 3D Printed ‘Plug and Play’ Millifluidic Devices for Programmable Fluidics

Soichiro Tsuda, Hussain Jaffery, David Doran, Mohammad Hezwani, Phillip J. Robbins, Mari Yoshida, Leroy Cronin and David T. Eddington

PLoS ONE, 2015, 10, e0141640
DOI: 10.1371/journal.pone.0141640

3-D printed microreactor for continuous flow oxidation of a flavonoid

Oyekunle Azeez Alimi, Christianah Aarinola Akinnawo, Oluwatayo R. Onisuru and Reinout Meijboom

J Flow Chem, 2020, 10, 517
DOI: 10.1007/s41981-020-00089-3

3D printing for chemical, pharmaceutical and biological applications

Andrew J. Capel, Rowan P. Rimington, Mark P. Lewis and Steven D. R. Christie

Nat Rev Chem, 2018, 2, 422
DOI: 10.1038/s41570-018-0058-y

A new chapter in pharmaceutical manufacturing: 3D-printed drug products

James Norman, Rapti D. Madurawe, Christine M.V. Moore, Mansoor A. Khan and Akm Khairuzzaman

Advanced Drug Delivery Reviews, 2017, 108, 39
DOI: 10.1016/j.addr.2016.03.001

3D Printing for Chemical Process Laboratories I: Materials and Connection Principles

Marius Gerrit Gelhausen, Tim Feuerbach, Ansgar Schubert and David William Agar

Chem Eng & Technol, 2018, 41, 618
DOI: 10.1002/ceat.201700294

3D printing of versatile reactionware for chemical synthesis

Philip J Kitson, Stefan Glatzel, Wei Chen, Chang-Gen Lin, Yu-Fei Song and Leroy Cronin

Nat Protoc, 2016, 11, 920
DOI: 10.1038/nprot.2016.041

Three-dimensional printed sample load/inject valves enabling online monitoring of extracellular calcium and zinc ions in living rat brains

Cheng-Kuan Su, Sheng-Chieh Hsia and Yuh-Chang Sun

Analytica Chimica Acta, 2014, 838, 58
DOI: 10.1016/j.aca.2014.06.037

3D printed flow-through cuvette insert for UV–Vis spectrophotometric and fluorescence measurements

Michał Michalec and Łukasz Tymecki

Talanta, 2018, 190, 423
DOI: 10.1016/j.talanta.2018.08.026