Cross Reference Logo
Citations to this article as recorded by CrossRef and RSC Journals (312 citations).

Versatile hybrid acoustic micromixer with demonstration of circulating cell-free DNA extraction from sub-ml plasma samples
Alvaro J. Conde, Ieva Keraite, Alfredo E. Ongaro and Maïwenn Kersaudy-Kerhoas
Lab Chip, 2020, 20, 741
DOI: 10.1039/C9LC01130G

Assessment of biocompatibility of 3D printed photopolymers using zebrafish embryo toxicity assays
N. P. Macdonald, F. Zhu, C. J. Hall, J. Reboud, P. S. Crosier, E. E. Patton, D. Wlodkowic and J. M. Cooper
Lab Chip, 2016, 16, 291
DOI: 10.1039/C5LC01374G

Additive manufacturing of three-dimensional (3D) microfluidic-based microelectromechanical systems (MEMS) for acoustofluidic applications
Ellen Cesewski, Alexander P. Haring, Yuxin Tong, Manjot Singh, Rajan Thakur, Sahil Laheri, Kaitlin A. Read, Michael D. Powell, Kenneth J. Oestreich and Blake N. Johnson
Lab Chip, 2018, 18, 2087
DOI: 10.1039/C8LC00427G

3D-printed microfluidic device for high-throughput production of lipid nanoparticles incorporating SARS-CoV-2 spike protein mRNA
Wan-Zhen Sophie Lin, William Kristian Vu Bostic and Noah Malmstadt
Lab Chip, 2024, 24, 162
DOI: 10.1039/D3LC00520H

3D-printed microfluidic automation
Anthony K. Au, Nirveek Bhattacharjee, Lisa F. Horowitz, Tim C. Chang and Albert Folch
Lab Chip, 2015, 15, 1934
DOI: 10.1039/C5LC00126A

Islet-on-chip: promotion of islet health and functionviaencapsulation within a polymerizable fibrillar collagen scaffold
Emma L. Vanderlaan, Joshua Sexton, Carmella Evans-Molina, Adrian Buganza Tepole and Sherry L. Voytik-Harbin
Lab Chip, 2023, 23, 4466
DOI: 10.1039/D3LC00371J

3D printed microfluidic circuitry via multijet-based additive manufacturing
R. D. Sochol, E. Sweet, C. C. Glick, S. Venkatesh, A. Avetisyan, K. F. Ekman, A. Raulinaitis, A. Tsai, A. Wienkers, K. Korner, K. Hanson, A. Long, B. J. Hightower, G. Slatton, D. C. Burnett, T. L. Massey, K. Iwai, L. P. Lee, K. S. J. Pister and L. Lin
Lab Chip, 2016, 16, 668
DOI: 10.1039/C5LC01389E

Rapid microfluidics prototyping through variotherm desktop injection molding for multiplex diagnostics
Gianmarco D. Suarez, Steevanson Bayer, Yuki Yu Kiu Tang, Domenick A. Suarez, Peter Pak-Hang Cheung and Stefan Nagl
Lab Chip, 2023, 23, 3850
DOI: 10.1039/D3LC00391D

Direct 3D-printing of cell-laden constructs in microfluidic architectures
Justin Liu, Henry H. Hwang, Pengrui Wang, Grace Whang and Shaochen Chen
Lab Chip, 2016, 16, 1430
DOI: 10.1039/C6LC00144K

Customisable 3D printed microfluidics for integrated analysis and optimisation
T. Monaghan, M. J. Harding, R. A. Harris, R. J. Friel and S. D. R. Christie
Lab Chip, 2016, 16, 3362
DOI: 10.1039/C6LC00562D

A 3D-printed microcapillary assembly for facile double emulsion generation
Chiara Martino, Simon Berger, Robert C. R. Wootton and Andrew J. deMello
Lab Chip, 2014, 14, 4178
DOI: 10.1039/C4LC00992D

3D printed modules for integrated microfluidic devices
Kyoung G. Lee, Kyun Joo Park, Seunghwan Seok, Sujeong Shin, Do Hyun Kim, Jung Youn Park, Yun Seok Heo, Seok Jae Lee and Tae Jae Lee
RSC Adv., 2014, 4, 32876
DOI: 10.1039/C4RA05072J

High density 3D printed microfluidic valves, pumps, and multiplexers
Hua Gong, Adam T. Woolley and Gregory P. Nordin
Lab Chip, 2016, 16, 2450
DOI: 10.1039/C6LC00565A

Evaluating commercial thermoplastic materials in fused deposition modeling 3D printing for their compatibility with DNA storage and analysis by quantitative polymerase chain reaction
Derek R. Eitzmann and Jared L. Anderson
Anal. Methods, 2022, 14, 2682
DOI: 10.1039/D2AY00772J

Fundamentals of rapid injection molding for microfluidic cell-based assays
Ulri N. Lee, Xiaojing Su, David J. Guckenberger, Ashley M. Dostie, Tianzi Zhang, Erwin Berthier and Ashleigh B. Theberge
Lab Chip, 2018, 18, 496
DOI: 10.1039/C7LC01052D

The upcoming 3D-printing revolution in microfluidics
Nirveek Bhattacharjee, Arturo Urrios, Shawn Kang and Albert Folch
Lab Chip, 2016, 16, 1720
DOI: 10.1039/C6LC00163G

Dynamic phase control with printing and fluidic materials' interaction by inkjet printing an RF sensor directly on a stereolithographic 3D printed microfluidic structure
Eiyong Park and Sungjoon Lim
Lab Chip, 2021, 21, 4364
DOI: 10.1039/D1LC00419K

3D printed microfluidic devices: enablers and barriers
Sidra Waheed, Joan M. Cabot, Niall P. Macdonald, Trevor Lewis, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore
Lab Chip, 2016, 16, 1993
DOI: 10.1039/C6LC00284F

Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
E. M. Hamad, S. E. R. Bilatto, N. Y. Adly, D. S. Correa, B. Wolfrum, M. J. Schöning, A. Offenhäusser and A. Yakushenko
Lab Chip, 2016, 16, 70
DOI: 10.1039/C5LC01195G

A simple and low-cost fully 3D-printed non-planar emulsion generator
Jia Ming Zhang, Er Qiang Li, Andres A. Aguirre-Pablo and Sigurdur T. Thoroddsen
RSC Adv., 2016, 6, 2793
DOI: 10.1039/C5RA23129A

High-precision modular microfluidics by micromilling of interlocking injection-molded blocks
Crystal E. Owens and A. John Hart
Lab Chip, 2018, 18, 890
DOI: 10.1039/C7LC00951H

Upgrading well plates using open microfluidic patterning
Samuel B. Berry, Tianzi Zhang, John H. Day, Xiaojing Su, Ilham Z. Wilson, Erwin Berthier and Ashleigh B. Theberge
Lab Chip, 2017, 17, 4253
DOI: 10.1039/C7LC00878C

Development of a microfluidic platform integrating high-resolution microstructured biomaterials to study cell–material interactions
D. Barata, E. Provaggi, C. van Blitterswijk and P. Habibovic
Lab Chip, 2017, 17, 4134
DOI: 10.1039/C7LC00802C

Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices
David J. Guckenberger, Theodorus E. de Groot, Alwin M. D. Wan, David J. Beebe and Edmond W. K. Young
Lab Chip, 2015, 15, 2364
DOI: 10.1039/C5LC00234F

Optical approach to resin formulation for 3D printed microfluidics
Hua Gong, Michael Beauchamp, Steven Perry, Adam T. Woolley and Gregory P. Nordin
RSC Adv., 2015, 5, 106621
DOI: 10.1039/C5RA23855B

Mimicking arterial thrombosis in a 3D-printed microfluidic in vitro vascular model based on computed tomography angiography data
Pedro F. Costa, Hugo J. Albers, John E. A. Linssen, Heleen H. T. Middelkamp, Linda van der Hout, Robert Passier, Albert van den Berg, Jos Malda and Andries D. van der Meer
Lab Chip, 2017, 17, 2785
DOI: 10.1039/C7LC00202E

An integrated micro-millifluidic processing system
Jia Ming Zhang, Qinglei Ji, Ying Liu, Jianyong Huang and Huiling Duan
Lab Chip, 2018, 18, 3393
DOI: 10.1039/C8LC00636A

Cryopreservable arrays of paper-based 3D tumor models for high throughput drug screening
Bisan Samara, Muhammedin Deliorman, Pavithra Sukumar and Mohammad A. Qasaimeh
Lab Chip, 2021, 21, 844
DOI: 10.1039/D0LC01300E

3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process
Ki-Won Gyak, Niraj K. Vishwakarma, Yoon-Ho Hwang, Jeehwan Kim, Hui-suk Yun and Dong-Pyo Kim
React. Chem. Eng., 2019, 4, 1393
DOI: 10.1039/C9RE00201D

Autonomous microfluidic capillaric circuits replicated from 3D-printed molds
A. O. Olanrewaju, A. Robillard, M. Dagher and D. Juncker
Lab Chip, 2016, 16, 3804
DOI: 10.1039/C6LC00764C

Microfluidic device fabrication mediated by surface chemical bonding
Rajamanickam Sivakumar and Nae Yoon Lee
Analyst, 2020, 145, 4096
DOI: 10.1039/D0AN00614A

3D printed metal molds for hot embossing plastic microfluidic devices
Tung-Yi Lin, Truong Do, Patrick Kwon and Peter B. Lillehoj
Lab Chip, 2017, 17, 241
DOI: 10.1039/C6LC01430E

Digital manufacturing for accelerating organ-on-a-chip dissemination and electrochemical biosensing integration
Juan F. Hernández-Rodríguez, Miguel Ángel López, Daniel Rojas and Alberto Escarpa
Lab Chip, 2022, 22, 4805
DOI: 10.1039/D2LC00499B

Effective bioprinting resolution in tissue model fabrication
Amir K. Miri, Iman Mirzaee, Shabir Hassan, Shirin Mesbah Oskui, Daniel Nieto, Ali Khademhosseini and Yu Shrike Zhang
Lab Chip, 2019, 19, 2019
DOI: 10.1039/C8LC01037D

Vat photopolymerization 3D printed microfluidic devices for organ-on-a-chip applications
Laura A. Milton, Matthew S. Viglione, Louis Jun Ye Ong, Gregory P. Nordin and Yi-Chin Toh
Lab Chip, 2023, 23, 3537
DOI: 10.1039/D3LC00094J

Automated 3D-printed unibody immunoarray for chemiluminescence detection of cancer biomarker proteins
C. K. Tang, A. Vaze and J. F. Rusling
Lab Chip, 2017, 17, 484
DOI: 10.1039/C6LC01238H

Bionanotechnology and bioMEMS (BNM): state-of-the-art applications, opportunities, and challenges
Jeffrey T. Borenstein, Gerard Cummins, Abhishek Dutta, Eyad Hamad, Michael Pycraft Hughes, Xingyu Jiang, Hyowon (Hugh) Lee, Kin Fong Lei, Xiaowu (Shirley) Tang, Yuanjin Zheng and Jie Chen
Lab Chip, 2023, 23, 4928
DOI: 10.1039/D3LC00296A

Research highlights: printing the future of microfabrication
Peter Tseng, Coleman Murray, Donghyuk Kim and Dino Di Carlo
Lab Chip, 2014, 14, 1491
DOI: 10.1039/c4lc90023e

Monolithic multilayer microfluidics via sacrificial molding of 3D-printed isomalt
Matthew K. Gelber and Rohit Bhargava
Lab Chip, 2015, 15, 1736
DOI: 10.1039/C4LC01392A

3D-printing of transparent bio-microfluidic devices in PEG-DA
Arturo Urrios, Cesar Parra-Cabrera, Nirveek Bhattacharjee, Alan M. Gonzalez-Suarez, Luis G. Rigat-Brugarolas, Umashree Nallapatti, Josep Samitier, Cole A. DeForest, Francesc Posas, José L. Garcia-Cordero and Albert Folch
Lab Chip, 2016, 16, 2287
DOI: 10.1039/C6LC00153J

3D printing of functional microrobots
Jinhua Li and Martin Pumera
Chem. Soc. Rev., 2021, 50, 2794
DOI: 10.1039/D0CS01062F

Engineering 3D parallelized microfluidic droplet generators with equal flow profiles by computational fluid dynamics and stereolithographic printing
Tom Kamperman, Liliana Moreira Teixeira, Seyedeh Sarah Salehi, Greet Kerckhofs, Yann Guyot, Mike Geven, Liesbet Geris, Dirk Grijpma, Sebastien Blanquer and Jeroen Leijten
Lab Chip, 2020, 20, 490
DOI: 10.1039/C9LC00980A

An acoustofluidic sputum liquefier
Po-Hsun Huang, Liqiang Ren, Nitesh Nama, Sixing Li, Peng Li, Xianglan Yao, Rosemarie A. Cuento, Cheng-Hsin Wei, Yuchao Chen, Yuliang Xie, Ahmad Ahsan Nawaz, Yael G. Alevy, Michael J. Holtzman, J. Philip McCoy, Stewart J. Levine and Tony Jun Huang
Lab Chip, 2015, 15, 3125
DOI: 10.1039/C5LC00539F

3D-printed air-blast microfluidic nozzles for preparing calcium alginate microparticles
Biao Ye, Hong Xu, Binbin Bao, Jin Xuan and Li Zhang
RSC Adv., 2017, 7, 48826
DOI: 10.1039/C7RA08611C

Direct digital manufacturing of a mini-centrifuge-driven centrifugal microfluidic device and demonstration of a smartphone-based colorimetric enzyme-linked immunosorbent assay
Yoshiaki Ukita, Yuichi Utsumi and Yuzuru Takamura
Anal. Methods, 2016, 8, 256
DOI: 10.1039/C5AY01969A

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors
Cesar Parra-Cabrera, Clement Achille, Simon Kuhn and Rob Ameloot
Chem. Soc. Rev., 2018, 47, 209
DOI: 10.1039/C7CS00631D

3D printed microfluidics for biological applications
Chee Meng Benjamin Ho, Sum Huan Ng, King Ho Holden Li and Yong-Jin Yoon
Lab Chip, 2015, 15, 3627
DOI: 10.1039/C5LC00685F

3D-Printed Fluidic Devices for Nanoparticle Preparation and Flow-Injection Amperometry Using Integrated Prussian Blue Nanoparticle-Modified Electrodes
Gregory W. Bishop, Jennifer E. Satterwhite, Snehasis Bhakta, Karteek Kadimisetty, Kelsey M. Gillette, Eric Chen and James F. Rusling
Anal. Chem., 2015, 87, 5437
DOI: 10.1021/acs.analchem.5b00903

Redefining Quantum Dot Synthesis with Additive-Manufactured Microfluidics—A Review
Faisal bin Nasser Sarbaland, Masashi Kobayashi, Daiki Tanaka, Risa Fujita and Masahiro Furuya
J, 2025, 8, 18
DOI: 10.3390/j8020018

Biomedical applications of microfluidic devices: Achievements and challenges
Mahsa Akbari Kenari, Erfan Rezvani Ghomi, Amirreza Akbari Kenari, Seyed Mohammad Saeed Arabi, Javad Deylami and Seeram Ramakrishna
Polymers for Advanced Techs, 2022, 33, 3920
DOI: 10.1002/pat.5847

Simple-Flow: A 3D-Printed Multiwell Flow Plate to Coculture Primary Human Lung Cells at the Air–Liquid Interface
Cinta Iriondo, Sem Koornneef, Kari-Pekka Skarp, Marjon Buscop-van Kempen, Anne Boerema-de Munck and Robbert J. Rottier
ACS Biomater. Sci. Eng., 2025, 11, 451
DOI: 10.1021/acsbiomaterials.4c01322

Diagnostic Efficacy and Tolerability of Molded Plastic Nasopharyngeal Swab (FinSwab) Compared to Flocked Nylon Swab in Detection of SARS-CoV-2 and Other Respiratory Viruses
Miia Laine, Jaakko Ahti, Ville Peltola, Piritta Peri, Antti J. Hakanen, Matti Waris and Heba H. Mostafa
Microbiol Spectr, 2021, 9
DOI: 10.1128/Spectrum.00736-21

An overview on the advantages and limitations of 3D printing of microneedles
Emine Dilek Ozyilmaz, Aybuke Turan and Tansel Comoglu
Pharmaceutical Development and Technology, 2021, 26, 923
DOI: 10.1080/10837450.2021.1965163

Open Microfluidic Capillary Systems
Erwin Berthier, Ashley M. Dostie, Ulri N. Lee, Jean Berthier and Ashleigh B. Theberge
Anal. Chem., 2019, 91, 8739
DOI: 10.1021/acs.analchem.9b01429

3D-printed bioanalytical devices
Gregory W Bishop, Jennifer E Satterwhite-Warden, Karteek Kadimisetty and James F Rusling
Nanotechnology, 2016, 27, 284002
DOI: 10.1088/0957-4484/27/28/284002

Advanced 3D Bioprinting Technologies
D. V. Leonov, Yu. A. Spirina, A. A. Yatsenko, V. A. Kushnarev, E. M. Ustinov and S. V. Barannikov
Cell Tiss. Biol., 2021, 15, 616
DOI: 10.1134/S1990519X21060134

Automated calibration of 3D-printed microfluidic devices based on computer vision
Junchao Wang, Kaicong Liang, Naiyin Zhang, Hailong Yao, Tsung-Yi Ho and Lingling Sun
Biomicrofluidics, 2021, 15
DOI: 10.1063/5.0037274

A review of 3D-printed sensors
Yujie Ni, Ru Ji, Kaiwen Long, Ting Bu, Kejian Chen and Songlin Zhuang
Applied Spectroscopy Reviews, 2017, 52, 623
DOI: 10.1080/05704928.2017.1287082

Biocompatible, Flexible, and Oxygen-Permeable Silicone-Hydrogel Material for Stereolithographic Printing of Microfluidic Lab-On-A-Chip and Cell-Culture Devices
Sabine Zips, Lukas Hiendlmeier, Lennart Jakob Konstantin Weiß, Heike Url, Tetsuhiko F. Teshima, Richard Schmid, Markus Eblenkamp, Petra Mela and Bernhard Wolfrum
ACS Appl. Polym. Mater., 2021, 3, 243
DOI: 10.1021/acsapm.0c01071

3D printing for the integration of porous materials into miniaturised fluidic devices: A review
Hari Kalathil Balakrishnan, Egan H. Doeven, Andrea Merenda, Ludovic F. Dumée and Rosanne M. Guijt
Analytica Chimica Acta, 2021, 1185, 338796
DOI: 10.1016/j.aca.2021.338796

From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication
Jingjing Xu, Michael Harasek and Margit Gföhler
Polymers, 2025, 17, 455
DOI: 10.3390/polym17040455

On-Demand Isolation and Manipulation of C. elegans by In Vitro Maskless Photopatterning
C. Ryan Oliver, Eleni Gourgou, Daphne Bazopoulou, Nikos Chronis, A. John Hart and David T. Eddington
PLoS ONE, 2016, 11, e0145935
DOI: 10.1371/journal.pone.0145935

Additive manufacturing in radiation oncology: a review of clinical practice, emerging trends and research opportunities
Rance Tino, Martin Leary, Adam Yeo, Elizabeth Kyriakou, Tomas Kron and Milan Brandt
Int. J. Extrem. Manuf., 2020, 2, 012003
DOI: 10.1088/2631-7990/ab70af

Fabrication routes via projection stereolithography for 3D-printing of microfluidic geometries for nucleic acid amplification
Charalampos Tzivelekis, Pavlos Sgardelis, Kevin Waldron, Richard Whalley, Dehong Huo, Kenny Dalgarno and Andreas Offenhausser
PLoS ONE, 2020, 15, e0240237
DOI: 10.1371/journal.pone.0240237

3D-printed sensors: Current progress and future challenges
Mohammad Reza Khosravani and Tamara Reinicke
Sensors and Actuators A: Physical, 2020, 305, 111916
DOI: 10.1016/j.sna.2020.111916

Research Progress of 3D Printing Microfluidic Chip
Siyuan Zhang and Lin Fu
J. Phys.: Conf. Ser., 2020, 1549, 052055
DOI: 10.1088/1742-6596/1549/5/052055

Surface-Wetting Characteristics of DLP-Based 3D Printing Outcomes under Various Printing Conditions for Microfluidic Device Fabrication
Jeon-Woong Kang, Jinpyo Jeon, Jun-Young Lee, Jun-Hyeong Jeon and Jiwoo Hong
Micromachines, 2023, 15, 61
DOI: 10.3390/mi15010061

Additive Manufacturing of Microcantilevers of Varying Stiffnesses for Sensing Applications
Shervin Foroughi, Mohsen Habibi and Muthukumaran Packirisamy
J. Electrochem. Soc., 2022, 169, 027507
DOI: 10.1149/1945-7111/ac50e1

Multimaterial hydrogel with widely tunable elasticity by selective photopolymerization of PEG diacrylate and epoxy monomers
Esben Kjaer Unmack Larsen, Niels B. Larsen, Kristoffer Almdal, E. K. U. Larsen, N. B. Larsen and K. Almdal
J. Polym. Sci. Part B: Polym. Phys., 2016, 54, 1195
DOI: 10.1002/polb.24007

Impact of Microfluidic Chip Electrophoresis in Modern Analysis: An Update on Recent Trends
Sumit Pasricha, Rohit Bhatia, Preeti Patel and Bhupinder Kumar
CAC, 2023, 19, 358
DOI: 10.2174/1573411019666230526163826

Fabrication of 3D Microfluidic Channels and In‐Channel Features Using 3D Printed, Water‐Soluble Sacrificial Mold
Wei Huang Goh and Michinao Hashimoto
Macro Materials & Eng, 2018, 303
DOI: 10.1002/mame.201700484

Microfluidic chip fabrication and performance analysis of 3D printed material for use in microfluidic nucleic acid amplification applications
Charalampos Tzivelekis, Matthew P Selby, Albert Batet, Hojjat Madadi and Kenny Dalgarno
J. Micromech. Microeng., 2021, 31, 035005
DOI: 10.1088/1361-6439/abd9a9

Biotinylated Photopolymers for 3D‐Printed Unibody Lab‐on‐a‐Chip Optical Platforms
Caterina Credi, Gianmarco Griffini, Marinella Levi and Stefano Turri
Small, 2018, 14
DOI: 10.1002/smll.201702831

3D-printed flow system for determination of lead in natural waters
Elodie Mattio, Fabien Robert-Peillard, Catherine Branger, Kinga Puzio, André Margaillan, Christophe Brach-Papa, Joël Knoery, Jean-Luc Boudenne and Bruno Coulomb
Talanta, 2017, 168, 298
DOI: 10.1016/j.talanta.2017.03.059

Design and manufacture of high-filling-efficiency microfluidic devices
Chun-Te Wu and Gou-Jen Wang
Int J Adv Manuf Technol, 2018, 97, 1711
DOI: 10.1007/s00170-018-2039-1

Cell-laden microfibers fabricated using μl cell-suspension
Minghao Nie, Shogo Nagata, Hoshimi Aoyagi, Akane Itou, Ai Shima and Shoji Takeuchi
Biofabrication, 2020, 12, 045021
DOI: 10.1088/1758-5090/ab89cb

Liquid bridge microstereolithography
Jeongwoo Lee, Yanfeng Lu, Sumanth Kashyap, Aslan Alarmdari, Md. Omar Faruk Emon and Jae-Won Choi
Additive Manufacturing, 2018, 21, 76
DOI: 10.1016/j.addma.2018.02.012

Direct Writing of Microfluidic Footpaths by Pyro-EHD Printing
Sara Coppola, Giuseppe Nasti, Michele Todino, Federico Olivieri, Veronica Vespini and Pietro Ferraro
ACS Appl. Mater. Interfaces, 2017, 9, 16488
DOI: 10.1021/acsami.7b02633

High-speed material jetting additive manufacturing of silicone structures: mechanical characterization
Farzad Liravi, Mehrnaz Salarian, Charles Dal Castel, Leonardo Simon and Ehsan Toyserkani
Prog Addit Manuf, 2019, 4, 479
DOI: 10.1007/s40964-019-00097-3

Can 3D Printing Bring Droplet Microfluidics to Every Lab?—A Systematic Review
Nafisat Gyimah, Ott Scheler, Toomas Rang and Tamas Pardy
Micromachines, 2021, 12, 339
DOI: 10.3390/mi12030339

3D-Printed Microfluidic One-Way Valves and Pumps
Hunter Hinnen, Matthew Viglione, Troy R. Munro, Adam T. Woolley and Gregory P. Nordin
Micromachines, 2023, 14, 1286
DOI: 10.3390/mi14071286

High-Throughput Generation of Emulsions and Microgels in Parallelized Microfluidic Drop-Makers Prepared by Rapid Prototyping
Tim Femmer, Alexander Jans, Rudi Eswein, Naveed Anwar, Martin Moeller, Matthias Wessling and Alexander J.C. Kuehne
ACS Appl. Mater. Interfaces, 2015, 7, 12635
DOI: 10.1021/acsami.5b03969

3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications
Alireza Ahmadian Yazdi, Adam Popma, William Wong, Tammy Nguyen, Yayue Pan and Jie Xu
Microfluid Nanofluid, 2016, 20
DOI: 10.1007/s10404-016-1715-4

Embedded 3D Printing for Microchannel Fabrication in Epoxy-Based Microfluidic Devices
Cheng Zhang, Wenyu Ning, Ding Nan, Jiangtao Hao, Weiliang Shi, Yang Yang, Fei Duan, Wenbo Jin, Lei Liu and Danyang Zhao
Polymers, 2024, 16, 3320
DOI: 10.3390/polym16233320

Miniaturization and 3D Printing of Bioreactors: A Technological Mini Review
Spyridon Achinas, Jorn-Ids Heins, Janneke Krooneman and Gerrit Jan Willem Euverink
Micromachines, 2020, 11, 853
DOI: 10.3390/mi11090853

Versatile Microfluidics for Biofabrication Platforms Enabled by an Agile and Inexpensive Fabrication Pipeline
Amirpasha Moetazedian, Alessia Candeo, Siyun Liu, Arran Hughes, Vahid Nasrollahi, Mozafar Saadat, Andrea Bassi, Liam M. Grover, Liam R. Cox and Gowsihan Poologasundarampillai
Adv Healthcare Materials, 2023, 12
DOI: 10.1002/adhm.202300636

Fabricating and Laminating Films with Through‐Holes and Engraved/Protruding Structures for 3D Micro/Nanofluidic Platforms
Juyeol Bae, Ronghui Wu and Taesung Kim
Small Methods, 2023, 7
DOI: 10.1002/smtd.202300211

The recent development and applications of fluidic channels by 3D printing
Yufeng Zhou
J Biomed Sci, 2017, 24
DOI: 10.1186/s12929-017-0384-2

Recent Advances in Microfluidic Platform for Physical and Immunological Detection and Capture of Circulating Tumor Cells
Mahesh Padmalaya Bhat, Venkatachalam Thendral, Uluvangada Thammaiah Uthappa, Kyeong-Hwan Lee, Madhuprasad Kigga, Tariq Altalhi, Mahaveer D. Kurkuri and Krishna Kant
Biosensors, 2022, 12, 220
DOI: 10.3390/bios12040220

Ultrarapid Detection of Pathogenic Bacteria Using a 3D Immunomagnetic Flow Assay
Wonjae Lee, Donghoon Kwon, Boram Chung, Gyoo Yeol Jung, Anthony Au, Albert Folch and Sangmin Jeon
Anal. Chem., 2014, 86, 6683
DOI: 10.1021/ac501436d

Predicting the behavior of microfluidic circuits made from discrete elements
Krisna C. Bhargava, Bryant Thompson, Danish Iqbal and Noah Malmstadt
Sci Rep, 2015, 5
DOI: 10.1038/srep15609

Leveraging the third dimension in microfluidic devices using 3D printing: no longer just scratching the surface
Lauro A. Pradela Filho, Thiago R. L. C. Paixão, Gregory P. Nordin and Adam T. Woolley
Anal Bioanal Chem, 2024, 416, 2031
DOI: 10.1007/s00216-023-04862-w

Manufacturing of Stereolithography Enabled Soft Tools for Point of Care Micromixing and Sensing Chambers for Underwater Vehicles
Edisson A. Naula, Biali Lima Rodríguez, Luis E. Garza-Castañon and J. Israel Martínez-López
Procedia Manufacturing, 2021, 53, 443
DOI: 10.1016/j.promfg.2021.06.047

Flow invariant droplet formation for stable parallel microreactors
Carson T. Riche, Emily J. Roberts, Malancha Gupta, Richard L. Brutchey and Noah Malmstadt
Nat Commun, 2016, 7
DOI: 10.1038/ncomms10780

Microfluidic devices for embryonic and larval zebrafish studies
Arezoo Khalili and Pouya Rezai
Briefings in Functional Genomics, 2019, 18, 419
DOI: 10.1093/bfgp/elz006

Recent developments in scale-up of microfluidic emulsion generation via parallelization
Heon-Ho Jeong, David Issadore and Daeyeon Lee
Korean J. Chem. Eng., 2016, 33, 1757
DOI: 10.1007/s11814-016-0041-6

Modular, Discrete Micromixer Elements Fabricated by 3D Printing
Krisna Bhargava, Roya Ermagan, Bryant Thompson, Andrew Friedman and Noah Malmstadt
Micromachines, 2017, 8, 137
DOI: 10.3390/mi8050137

Achieving High-Precision, Low-Cost Microfluidic Chip Fabrication with Flexible PCB Technology
Andres Vanhooydonck, Thalissa Caers, Marc Parrilla, Peter Delputte and Regan Watts
Micromachines, 2024, 15, 425
DOI: 10.3390/mi15040425

Direct digital manufacturing of autonomous centrifugal microfluidic device
Yoshiaki Ukita, Yuzuru Takamura and Yuichi Utsumi
Jpn. J. Appl. Phys., 2016, 55, 06GN02
DOI: 10.7567/JJAP.55.06GN02

Desktop aligner for fabrication of multilayer microfluidic devices
Xiang Li, Zeta Tak For Yu, Dalton Geraldo, Shinuo Weng, Nitesh Alve, Wu Dun, Akshay Kini, Karan Patel, Roberto Shu, Feng Zhang, Gang Li, Qinghui Jin and Jianping Fu
Review of Scientific Instruments, 2015, 86
DOI: 10.1063/1.4927197

Application of microfluidics in sports and tumor biomarker detection: Advancing the identification of physiological disorders
Xiaowei Chen, A. Ghorbani, Long Quan and D. Toghraie
Journal of Molecular Liquids, 2023, 387, 122706
DOI: 10.1016/j.molliq.2023.122706

High-resolution stereolithography: Negative spaces enabled by control of fluid mechanics
Ian A. Coates, William Pan, Max A. Saccone, Gabriel Lipkowitz, Dan Ilyin, Madison M. Driskill, Maria T. Dulay, Curtis W. Frank, Eric S. G. Shaqfeh and Joseph M. DeSimone
Proc. Natl. Acad. Sci. U.S.A., 2024, 121
DOI: 10.1073/pnas.2405382121

3D-Printed Microfluidic Device for the Detection of Pathogenic Bacteria Using Size-based Separation in Helical Channel with Trapezoid Cross-Section
Wonjae Lee, Donghoon Kwon, Woong Choi, Gyoo Yeol Jung, Anthony K. Au, Albert Folch and Sangmin Jeon
Sci Rep, 2015, 5
DOI: 10.1038/srep07717

Digital Manufacturing for Microfluidics
Arman Naderi, Nirveek Bhattacharjee and Albert Folch
Annu. Rev. Biomed. Eng., 2019, 21, 325
DOI: 10.1146/annurev-bioeng-092618-020341

Micro Total Analysis Systems: Fundamental Advances and Applications
Damith E. W. Patabadige, Shu Jia, Jay Sibbitts, Jalal Sadeghi, Kathleen Sellens and Christopher T. Culbertson
Anal. Chem., 2016, 88, 320
DOI: 10.1021/acs.analchem.5b04310

Electrochemical fluidic fused filament fabricated devices (eF4D): In-channel electrode activation
Juan F. Hernández-Rodríguez, Daniel Rojas and Alberto Escarpa
Sensors and Actuators B: Chemical, 2023, 393, 134290
DOI: 10.1016/j.snb.2023.134290

Adhesive bonding strategies to fabricate high-strength and transparent 3D printed microfluidic device
Seren Kecili and H. Cumhur Tekin
Biomicrofluidics, 2020, 14
DOI: 10.1063/5.0003302

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips
Ho Nam Chan, Yangfan Chen, Yiwei Shu, Yin Chen, Qian Tian and Hongkai Wu
Microfluid Nanofluid, 2015, 19, 9
DOI: 10.1007/s10404-014-1542-4

3D Printing of Organs-On-Chips
Hee-Gyeong Yi, Hyungseok Lee and Dong-Woo Cho
Bioengineering, 2017, 4, 10
DOI: 10.3390/bioengineering4010010

Discrete elements for 3D microfluidics
Krisna C. Bhargava, Bryant Thompson and Noah Malmstadt
Proc. Natl. Acad. Sci. U.S.A., 2014, 111, 15013
DOI: 10.1073/pnas.1414764111

Additive Manufacturing: Unlocking the Evolution of Energy Materials
Adilet Zhakeyev, Panfeng Wang, Li Zhang, Wenmiao Shu, Huizhi Wang and Jin Xuan
Advanced Science, 2017, 4
DOI: 10.1002/advs.201700187

Spatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics
Jose L. Sanchez Noriega, Nicholas A. Chartrand, Jonard Corpuz Valdoz, Collin G. Cribbs, Dallin A. Jacobs, Daniel Poulson, Matthew S. Viglione, Adam T. Woolley, Pam M. Van Ry, Kenneth A. Christensen and Gregory P. Nordin
Nat Commun, 2021, 12
DOI: 10.1038/s41467-021-25788-w

Novel Additive Manufactured Multielectrode Electrochemical Cell with Honeycomb Inspired Design for the Detection of Methyl Parathion in Honey Samples
Bruno C. Janegitz, Robert D. Crapnell, Paulo Roberto de Oliveira, Cristiane Kalinke, Matthew J. Whittingham, Alejandro Garcia-Miranda Ferrari and Craig E. Banks
ACS Meas. Sci. Au, 2023, 3, 217
DOI: 10.1021/acsmeasuresciau.3c00003

Evaporation induced acoustic emissions in microfluidic vessels
S. Dutta, T. J. Bieling and G. J. Verbiest
R. Soc. open sci., 2023, 10
DOI: 10.1098/rsos.231029

Dielectric Properties of Low-Loss Polymers for mmW and THz Applications
Seckin Sahin, Niru K. Nahar and Kubilay Sertel
J Infrared Milli Terahz Waves, 2019, 40, 557
DOI: 10.1007/s10762-019-00584-2

Liquid Letters
Shaowei Shi, Xubo Liu, Yanan Li, Xuefei Wu, Dong Wang, Joe Forth and Thomas P. Russell
Advanced Materials, 2018, 30
DOI: 10.1002/adma.201705800

Creating novel medical diagnostics with a design for manufacturing
Ashok A Kumar
Transl. Mater. Res., 2018, 5, 024001
DOI: 10.1088/2053-1613/aab86b

3D Printing of Inertial Microfluidic Devices
Sajad Razavi Bazaz, Omid Rouhi, Mohammad Amin Raoufi, Fatemeh Ejeian, Mohsen Asadnia, Dayong Jin and Majid Ebrahimi Warkiani
Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-62569-9

Bioprinting of Organ-on-Chip Systems: A Literature Review from a Manufacturing Perspective
Ketan Thakare, Laura Jerpseth, Zhijian Pei, Alaa Elwany, Francis Quek and Hongmin Qin
JMMP, 2021, 5, 91
DOI: 10.3390/jmmp5030091

Pulsed Laser Ablation on Polymethylmethacrylate (PMMA) Surfaces for Capillary Driven Flows
Md Shamim Mahmud, Akinjuyigbe Alo, Bahador Farshchian, Gwan-Hyoung Lee and Namwon Kim
Surfaces and Interfaces, 2022, 31, 101989
DOI: 10.1016/j.surfin.2022.101989

Translating microfluidics: Cell separation technologies and their barriers to commercialization
C. Wyatt Shields, Korine A. Ohiri, Luisa M. Szott and Gabriel P. López
Cytometry Part B Clinical, 2017, 92, 115
DOI: 10.1002/cyto.b.21388

Fabrication of whole-thermoplastic normally closed microvalve, micro check valve, and micropump
Adel Pourmand, Seyed Ali Mousavi Shaegh, Habib Badri Ghavifekr, Esmaiel Najafi Aghdam, Mehmet Remzi Dokmeci, Ali Khademhosseini and Yu Shrike Zhang
Sensors and Actuators B: Chemical, 2018, 262, 625
DOI: 10.1016/j.snb.2017.12.132

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare
Viraj Mehta and Subha N. Rath
Bio-des. Manuf., 2021, 4, 311
DOI: 10.1007/s42242-020-00112-5

Assessing the Environmental Impacts of Microfluidic Devices for Glucose Detection
Kristie J. Tjokro, Valerio Barbarossa, Stefano Cucurachi, Alina Rwei and Justin Lian
ACS Sustainable Chem. Eng., 2025, 13, 9500
DOI: 10.1021/acssuschemeng.5c01511

Portable Pathogen Diagnostics Using Microfluidic Cartridges Made from Continuous Liquid Interface Production Additive Manufacturing
Jacob Berger, Mehmet Y. Aydin, Robert Stavins, John Heredia, Ariana Mostafa, Anurup Ganguli, Enrique Valera, Rashid Bashir and William P. King
Anal. Chem., 2021, 93, 10048
DOI: 10.1021/acs.analchem.1c00654

Additive Manufacturing of a Miniature Functional Trocar for Eye Surgery
Kirsten Lussenburg, Marta Scali, Aimée Sakes and Paul Breedveld
Front. Med. Technol., 2022, 4
DOI: 10.3389/fmedt.2022.842958

Nonlinear Modeling of the Finite Helical Deformation of 3D-Printed PneuNets
Qinghua Yu, Mengjie Zhang, Chengru Jiang, Guoying Gu and Dong Wang
IEEE Trans. Robot., 2025, 41, 6590
DOI: 10.1109/TRO.2025.3629813

DNA Assembly in 3D Printed Fluidics
William G. Patrick, Alec A. K. Nielsen, Steven J. Keating, Taylor J. Levy, Che-Wei Wang, Jaime J. Rivera, Octavio Mondragón-Palomino, Peter A. Carr, Christopher A. Voigt, Neri Oxman, David S. Kong and Meni Wanunu
PLoS ONE, 2015, 10, e0143636
DOI: 10.1371/journal.pone.0143636

3D printing for chemical, pharmaceutical and biological applications
Andrew J. Capel, Rowan P. Rimington, Mark P. Lewis and Steven D. R. Christie
Nat Rev Chem, 2018, 2, 422
DOI: 10.1038/s41570-018-0058-y

Inkjet 3D printed chip for capillary gel electrophoresis
Rafał Walczak, Krzysztof Adamski and Wojciech Kubicki
Sensors and Actuators B: Chemical, 2018, 261, 474
DOI: 10.1016/j.snb.2018.01.174

Flexible Manipulator with Low-Melting-Point Alloy Actuation and Variable Stiffness
Haibo Wang, Zhiwei Chen and Siyang Zuo
Soft Robotics, 2022, 9, 577
DOI: 10.1089/soro.2020.0143

Self‐sealing thermoplastic fluoroelastomer enables rapid fabrication of modular microreactors
Alexander H. McMillan, Juan Mora‐Macías, Joan Teyssandier, Raymond Thür, Emmanuel Roy, Ignacio Ochoa, Steven De Feyter, Ivo F. J. Vankelecom, Maarten B. J. Roeffaers and Sasha Cai Lesher‐Pérez
Nano Select, 2021, 2, 1385
DOI: 10.1002/nano.202000241

Advancing 3D-Printed Microfluidics: Characterization of a Gas-Permeable, High-Resolution PDMS Resin for Stereolithography
Elyse Fleck, Alec Sunshine, Emma DeNatale, Charlise Keck, Alexandra McCann and Joseph Potkay
Micromachines, 2021, 12, 1266
DOI: 10.3390/mi12101266

Decision matrix for integrating 3D printing technologies for biomanufacturing of alternative testing model
Jia Min Lee, Ming Jie Tan, Wai Cheung Ma and Wai Yee Yeong
Int J Adv Manuf Technol, 2024, 130, 4137
DOI: 10.1007/s00170-024-12966-5

Characterization of Soft Tooling Photopolymers and Processes for Micromixing Devices with Variable Cross-Section
J. Israel Martínez-López, Héctor Andrés Betancourt Cervantes, Luis Donaldo Cuevas Iturbe, Elisa Vázquez, Edisson A. Naula, Alejandro Martínez López, Héctor R. Siller, Christian Mendoza-Buenrostro and Ciro A. Rodríguez
Micromachines, 2020, 11, 970
DOI: 10.3390/mi11110970

3D‐Printed Microfluidic Devices for Materials Science
Moien Alizadehgiashi, Albert Gevorkian, Moritz Tebbe, Minseok Seo, Elisabeth Prince and Eugenia Kumacheva
Adv Materials Technologies, 2018, 3
DOI: 10.1002/admt.201800068

3D-printed miniaturized fluidic tools in chemistry and biology
C.K. Dixit, K. Kadimisetty and J. Rusling
TrAC Trends in Analytical Chemistry, 2018, 106, 37
DOI: 10.1016/j.trac.2018.06.013

High Resolution Dual Material Stereolithography for Monolithic Microdevices
Christina Schmidleithner, Rujing Zhang, Nayere Taebnia, Esben K. U. Larsen, Kristoffer Almdal and Niels B. Larsen
Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202101180

Embedding objects during 3D printing to add new functionalities
Po Ki Yuen
Biomicrofluidics, 2016, 10
DOI: 10.1063/1.4958909

CO2 Laser Fabrication of PMMA Microfluidic Double T-Junction Device with Modified Inlet-Angle for Cost-Effective PCR Application
Gamal A. Nasser, Ahmed M.R. Fath El-Bab, Ahmed L. Abdel-Mawgood, Hisham Mohamed and Abdelatty M. Saleh
Micromachines, 2019, 10, 678
DOI: 10.3390/mi10100678

3D-Printed Microfluidics for Hands-On Undergraduate Laboratory Experiments
Matthew T. Vangunten, Uriah J. Walker, Han G. Do and Kyle N. Knust
J. Chem. Educ., 2020, 97, 178
DOI: 10.1021/acs.jchemed.9b00620

Evolution of 3d printing technology in fabrication of microfluidic devices and biological applications: a comprehensive review
Ranamay Saha, Moloy Sarkar, Sagnik Sarma Choudhury, Hemant Kumar, Geeta Bhatt and Shantanu Bhattacharya
Journal of Micromanufacturing, 2024, 7, 110
DOI: 10.1177/25165984241237357

Fabrication and Validation by Micromilling for Bioreactor Prototyping
Andrea Böhme, Felix Schütze, Sabine Sauer and Andreas H. Foitzik
MSF, 2018, 941, 2448
DOI: 10.4028/www.scientific.net/MSF.941.2448

Simple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication
Alex J. L. Morgan, Lorena Hidalgo San Jose, William D. Jamieson, Jennifer M. Wymant, Bing Song, Phil Stephens, David A. Barrow, Oliver K. Castell and Min-Hsien Wu
PLoS ONE, 2016, 11, e0152023
DOI: 10.1371/journal.pone.0152023

A fully 3D-printed versatile tumor-on-a-chip allows multi-drug screening and correlation with clinical outcomes for personalized medicine
Eliana Steinberg, Roy Friedman, Yoel Goldstein, Nethanel Friedman, Ofer Beharier, Jonathan Abraham Demma, Gideon Zamir, Ayala Hubert and Ofra Benny
Commun Biol, 2023, 6
DOI: 10.1038/s42003-023-05531-5

Powder bed binder jetting additive manufacturing of silicone structures
Farzad Liravi and Mihaela Vlasea
Additive Manufacturing, 2018, 21, 112
DOI: 10.1016/j.addma.2018.02.017

Versatile and Low-Cost Fabrication of Modular Lock-and-Key Microfluidics for Integrated Connector Mixer Using a Stereolithography 3D Printing
Isa Anshori, Vincent Lukito, Rafita Adhawiyah, Delpita Putri, Suksmandhira Harimurti, Tati Latifah Erawati Rajab, Arfat Pradana, Mohammad Akbar, Mas Rizky Anggun Adipurna Syamsunarno, Murni Handayani, Agnes Purwidyantri and Briliant Adhi Prabowo
Micromachines, 2022, 13, 1197
DOI: 10.3390/mi13081197

Topological characterization of plasma-etched polymer surface using discontinuous percolation transition
Leo Mendel D. Rosario, Hernando S. Salapare, Frédéric Guittard, Roy B. Tumlos and Maricor N. Soriano
Materials Chemistry and Physics, 2017, 200, 322
DOI: 10.1016/j.matchemphys.2017.07.084

3D Printing-Based Integrated Water Quality Sensing System
Muinul Banna, Kaustav Bera, Ryan Sochol, Liwei Lin, Homayoun Najjaran, Rehan Sadiq and Mina Hoorfar
Sensors, 2017, 17, 1336
DOI: 10.3390/s17061336

Adaptable Manufacturing and Biofabrication of Milliscale Organ Chips With Perfusable Vascular Beds
Charles Ethan Byrne, Ashley T. Martier, Gideon Wills Kpeli, Kevin Michael Conrad, William Bralower, Elisabet Olsen, Gabrielle Fortes, Caroline C. Culp, Max Wendell, Keefer A. Boone, Matthew R. Burow and Mark J. Mondrinos
Biotechnology Journal, 2024, 19
DOI: 10.1002/biot.202400550

Study of different materials response in micro milling using four edged micro end mill tools
Ganesh Malayath, Ajay M. Sidpara and Sankha Deb
Journal of Manufacturing Processes, 2020, 56, 169
DOI: 10.1016/j.jmapro.2020.04.079

A Role for 3D Printing in Kidney-on-a-Chip Platforms
Ryan D. Sochol, Navin R. Gupta and Joseph V. Bonventre
Curr Transpl Rep, 2016, 3, 82
DOI: 10.1007/s40472-016-0085-x

3D printed microfluidics and microelectronics
Ryan D. Sochol, Eric Sweet, Casey C. Glick, Sung-Yueh Wu, Chen Yang, Michael Restaino and Liwei Lin
Microelectronic Engineering, 2018, 189, 52
DOI: 10.1016/j.mee.2017.12.010

3D-Printed Biosensor Arrays for Medical Diagnostics
Mohamed Sharafeldin, Abby Jones and James Rusling
Micromachines, 2018, 9, 394
DOI: 10.3390/mi9080394

3D Droplet-Based Microfluidic Device Easily Assembled from Commercially Available Modules Online Coupled with ICPMS for Determination of Silver in Single Cell
Xiaoxiao Yu, Beibei Chen, Man He, Han Wang and Bin Hu
Anal. Chem., 2019, 91, 2869
DOI: 10.1021/acs.analchem.8b04844

Microfabrication Methods for Biodegradable Polymeric Carriers for Drug Delivery System Applications: A Review
Dong-Il Dan Cho and Hyung Jung Yoo
J. Microelectromech. Syst., 2015, 24, 10
DOI: 10.1109/JMEMS.2014.2368071

Fabrication of integrated microfluidic devices by direct ink writing (DIW) 3D printing
Terry Ching, Yingying Li, Rahul Karyappa, Akihiro Ohno, Yi-Chin Toh and Michinao Hashimoto
Sensors and Actuators B: Chemical, 2019, 297, 126609
DOI: 10.1016/j.snb.2019.05.086

High sensitivity automated multiplexed immunoassays using photonic crystal enhanced fluorescence microfluidic system
Yafang Tan, Tiantian Tang, Haisheng Xu, Chenqi Zhu and Brian T. Cunningham
Biosensors and Bioelectronics, 2015, 73, 32
DOI: 10.1016/j.bios.2015.05.041

3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological Applications
Megan Carve and Donald Wlodkowic
Micromachines, 2018, 9, 91
DOI: 10.3390/mi9020091

3D-printed microfluidic chips with patterned, cell-laden hydrogel constructs
Stephanie Knowlton, Chu Hsiang Yu, Fulya Ersoy, Sharareh Emadi, Ali Khademhosseini and Savas Tasoglu
Biofabrication, 2016, 8, 025019
DOI: 10.1088/1758-5090/8/2/025019

Fabrication of High-Aspect-Ratio Nanopores in Polymer Membranes: Analysis of Artifacts by Non-Destructive Testing
Jose-Alvim Berkenbrock, Matthias Mail, Garth Wells, Torsten Scherer and Sven Achenbach
IEEE Trans. Nanotechnology, 2022, 21, 29
DOI: 10.1109/TNANO.2021.3138751

Binder-jetting 3D printer capable of voxel-based control over deposited ink volume, adaptive layer thickness, and selective multi-pass printing
E. Persembe, C. Parra-Cabrera, C. Clasen and R. Ameloot
Review of Scientific Instruments, 2021, 92
DOI: 10.1063/5.0072715

Microfluidic devices manufacturing with a stereolithographic printer for biological applications
Bastián Carnero, Carmen Bao-Varela, Ana Isabel Gómez-Varela, Ezequiel Álvarez and María Teresa Flores-Arias
Materials Science and Engineering: C, 2021, 129, 112388
DOI: 10.1016/j.msec.2021.112388

Recent advances of 3D printing in analytical chemistry: Focus on microfluidic, separation, and extraction devices
Lujun Wang and Martin Pumera
TrAC Trends in Analytical Chemistry, 2021, 135, 116151
DOI: 10.1016/j.trac.2020.116151

Tailoring the Properties of 2D Nanomaterial‐Polymer Composites for Electromagnetic Interference Shielding and Energy Storage by 3D Printing—A Review
Amanuel Gebrekrstos, Tanyaradzwa S. Muzata, Anastasia Elias and Suprakas Sinha Ray
Adv Eng Mater, 2025, 27
DOI: 10.1002/adem.202402179

Accessing microfluidics through feature-based design software for 3D printing
Peter G. Shankles, Larry J. Millet, Jayde A. Aufrecht, Scott T. Retterer and David T. Eddington
PLoS ONE, 2018, 13, e0192752
DOI: 10.1371/journal.pone.0192752

Microfluidic production of monodisperse emulsions for cosmetics
Daehwan Park, Hajeong Kim and Jin Woong Kim
Biomicrofluidics, 2021, 15
DOI: 10.1063/5.0057733

Augmented 3D Printing for Multiscale Microphysiological Systems
Kyeong Seob Hwang, Jiyoung Song, Hyun Wook Kang, Jongbaeg Kim, Cheol Woo Ha, Nakwon Choi, Seokyoung Bang and Hong Nam Kim
Small, 2025, 21
DOI: 10.1002/smll.202504750

Rapid Fabrication of Multilayer Microfluidic Devices Using the Liquid Crystal Display-Based Stereolithography 3D Printing System
Zongjie Wang, Nicholas Martin, Delator Hini, Barry Mills and Keekyoung Kim
3D Printing and Additive Manufacturing, 2017, 4, 156
DOI: 10.1089/3dp.2017.0028

Simple, Cost-Effective 3D Printed Microfluidic Components for Disposable, Point-of-Care Colorimetric Analysis
Ho Nam Chan, Yiwei Shu, Bin Xiong, Yangfan Chen, Yin Chen, Qian Tian, Sean A. Michael, Bo Shen and Hongkai Wu
ACS Sens., 2016, 1, 227
DOI: 10.1021/acssensors.5b00100

An experimental approach to manufacturability assessment of microfluidic devices produced by stereolithography
Mattia Mele and Giampaolo Campana
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, 234, 4905
DOI: 10.1177/0954406220932203

Design and Analysis Comparison of Surface Acoustic Wave-Based Sensors for Fabrication Using Additive Manufacturing
Tayyab Waqar, Sezgin Ersoy and Ibrahim Alarifi
Journal of Nanomaterials, 2021, 2021, 1
DOI: 10.1155/2021/5598347

Scanning‐Laser‐Based Microstereolithography of Microfluidic Chips with Micron Resolution
Christof Rein, Keynaz Kamranikia, Raymonde Council, Pegah Pezeshkpour, Frederik Kotz‐Helmer and Bastian E. Rapp
Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202400047

Magnetic System for Automated Manipulation of Paramagnetic Particles
David J. Guckenberger, Hannah M. Pezzi, Mary C. Regier, Scott M. Berry, Kevin Fawcett, Kevin Barrett and David J. Beebe
Anal. Chem., 2016, 88, 9902
DOI: 10.1021/acs.analchem.6b02257

Mikrofluidik aus dem 3D‐Drucker
Anthony K. Au, Wilson Huynh, Lisa F. Horowitz and Albert Folch
Angewandte Chemie, 2016, 128, 3926
DOI: 10.1002/ange.201504382

Advances in point-of-care optical biosensing for underserved populations
Nandita Chaturvedi, Artem Goncharov, Sayantan Tripathy, Angela Michelle T. San Juan, Samuel B. Mabbott, Aydogan Ozcan, Frances S. Ligler and Gerard L. Coté
TrAC Trends in Analytical Chemistry, 2024, 175, 117731
DOI: 10.1016/j.trac.2024.117731

One-Step Fabrication of a Microfluidic Device with an Integrated Membrane and Embedded Reagents by Multimaterial 3D Printing
Feng Li, Petr Smejkal, Niall P. Macdonald, Rosanne M. Guijt and Michael C. Breadmore
Anal. Chem., 2017, 89, 4701
DOI: 10.1021/acs.analchem.7b00409

Multi-Resin Masked Stereolithography (MSLA) 3D Printing for Rapid and Inexpensive Prototyping of Microfluidic Chips with Integrated Functional Components
Isteaque Ahmed, Katherine Sullivan and Aashish Priye
Biosensors, 2022, 12, 652
DOI: 10.3390/bios12080652

3D Printed Tissue Models: Present and Future
Jinah Jang, Hee-Gyeong Yi and Dong-Woo Cho
ACS Biomater. Sci. Eng., 2016, 2, 1722
DOI: 10.1021/acsbiomaterials.6b00129

Combining Hydrophilic and Hydrophobic Materials in 3D Printing for Fabricating Microfluidic Devices with Spatial Wettability
Max J. Männel, Niclas Weigel, Nicolas Hauck, Thomas Heida and Julian Thiele
Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202100094

Additive manufacturing of bionic interfaces: From conceptual understanding to renewable energy applications
Xuliang Chen, Annan Chen, Lei Zhang, Hanyang Yu, Zhengyi Mao, Yuhan Chen, Jialun Gu, Chunze Yan and Jian Lu
Advanced Bionics, 2025, 1, 57
DOI: 10.1016/j.abs.2024.10.001

Design and Fabrication of 3D‐Printed Lab‐On‐A‐Chip Devices for Fiber‐Based Optical Chromatography and Sorting
Ole Milark, Marc Buttkewitz, Emil Agócs, Beate Legutko, Benjamin Bergmann, Janina Bahnemann, Alexander Heisterkamp and Maria Leilani Torres‐Mapa
Advanced Photonics Research, 2024, 5
DOI: 10.1002/adpr.202400011

Direct Stereolithographic 3D Printing of Microfluidic Structures on Polymer Substrates for Printed Electronics
Sabine Zips, Ole Jonas Wenzel, Philipp Rinklin, Leroy Grob, Korkut Terkan, Nouran Yehia Adly, Lennart Weiß and Bernhard Wolfrum
Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800455

Vat Photopolymerization 3D Printing of Advanced Soft Sensors and Actuators: From Architecture to Function
Wenyu Zhao, Ziya Wang, Jianpeng Zhang, Xiaopu Wang, Yingtian Xu, Ning Ding and Zhengchun Peng
Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202001218

Dynamics of Capillary-Driven Flow in 3D Printed Open Microchannels
Robert K. Lade, Erik J. Hippchen, Christopher W. Macosko and Lorraine F. Francis
Langmuir, 2017, 33, 2949
DOI: 10.1021/acs.langmuir.6b04506

Evaluation of 3D-printed molds for fabrication of non-planar microchannels
Pravien Parthiban, Sindhu Vijayan, Patrick S. Doyle and Michinao Hashimoto
Biomicrofluidics, 2021, 15
DOI: 10.1063/5.0047497

Microfluidics: Recent Advances Toward Lab‐on‐Chip Applications in Bioanalysis
Bharat Sharma and Ashutosh Sharma
Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202100738

Engineering of Removing Sacrificial Materials in 3D-Printed Microfluidics
Pengju Yin, Bo Hu, Langlang Yi, Chun Xiao, Xu Cao, Lei Zhao and Hongyan Shi
Micromachines, 2018, 9, 327
DOI: 10.3390/mi9070327

Emerging Advances in Microfluidic Hydrogel Droplets for Tissue Engineering and STEM Cell Mechanobiology
Mohamad Orabi and Joe F. Lo
Gels, 2023, 9, 790
DOI: 10.3390/gels9100790

Microfluidics Evolution and Surface Functionalization: A Pathway to Enhanced Heavy Metal Ion Detection
Zhejun Xu, Arun Jaiswal, Xiaochen Liu, Zhenxu Yang, Qiankun Yin, Kien Voon Kong and Ken‐Tye Yong
Advanced Sensor Research, 2024, 3
DOI: 10.1002/adsr.202400008

3D printed microfluidic device with integrated optical sensing for particle analysis
S.M. Hampson, W. Rowe, S.D.R. Christie and M. Platt
Sensors and Actuators B: Chemical, 2018, 256, 1030
DOI: 10.1016/j.snb.2017.10.041

Additive manufacturing of a 3D vascular chip based on cytocompatible hydrogel
Yong Tae Kim, Jong Seob Choi, Eunjeong Choi and Heungsop Shin
European Polymer Journal, 2021, 151, 110451
DOI: 10.1016/j.eurpolymj.2021.110451

Fully inkjet-printed microfluidics: a solution to low-cost rapid three-dimensional microfluidics fabrication with numerous electrical and sensing applications
Wenjing Su, Benjamin S. Cook, Yunnan Fang and Manos M. Tentzeris
Sci Rep, 2016, 6
DOI: 10.1038/srep35111

3D Printing: An Alternative Microfabrication Approach with Unprecedented Opportunities in Design
Hari Kalathil Balakrishnan, Faizan Badar, Egan H. Doeven, James I. Novak, Andrea Merenda, Ludovic F. Dumée, Jennifer Loy and Rosanne M. Guijt
Anal. Chem., 2021, 93, 350
DOI: 10.1021/acs.analchem.0c04672

A Review of Flexible Acceleration Sensors Based on Piezoelectric Materials: Performance Characterization, Parametric Analysis, Frontier Technologies, and Applications
Yaoyao Liao, Hong Yang, Qingwei Liao, Wei Si, Yu Chu, Xiangcheng Chu and Lei Qin
Coatings, 2023, 13, 1252
DOI: 10.3390/coatings13071252

Fabrication of Embedded Microfluidic Chips with Single Micron Resolution Using Two‐Photon Lithography
Manuel Luitz, Büşra M. Kırpat Konak, Ahmad Sherbaz, Richard Prediger, Niloofar Nekoonam, Barbara Di Ventura, Frederik Kotz‐Helmer and Bastian E. Rapp
Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300667

Gold particles modified 3D printed carbon black nanonetwork electrode for improving the detection sensitivity of dopamine
Lian Zhong, Meifang Liao, Jing Ou, Yaxin Yang, Jie Wen, Yanyu Jiang, Honglin Yang, Xuemei Dai and Lujun Wang
Microchemical Journal, 2024, 201, 110630
DOI: 10.1016/j.microc.2024.110630

3D Printed Tooling for Injection Molded Microfluidics
Neil Convery, Iliyana Samardzhieva, John Moir Stormonth‐Darling, Sean Harrison, Gareth J. Sullivan and Nikolaj Gadegaard
Macro Materials & Eng, 2021, 306
DOI: 10.1002/mame.202100464

Monolithic, 3D-Printed Microfluidic Platform for Recapitulation of Dynamic Tumor Microenvironments
Ashley L. Beckwith, Jeffrey T. Borenstein and Luis Fernando Velasquez-Garcia
J. Microelectromech. Syst., 2018, 27, 1009
DOI: 10.1109/JMEMS.2018.2869327

A New Approach for On-Demand Generation of Various Oxygen Tensions for In Vitro Hypoxia Models
Chunyan Li, Wayne Chaung, Cameron Mozayan, Ranjeev Chabra, Ping Wang, Raj K. Narayan and Feng Zhao
PLoS ONE, 2016, 11, e0155921
DOI: 10.1371/journal.pone.0155921

Cheap, versatile, and turnkey fabrication of microfluidic master molds using consumer-grade LCD stereolithography 3D printing
Vincent G. Colin, Théo Travers, Denis Gindre, Régis Barillé and Matthieu Loumaigne
Int J Adv Manuf Technol, 2021, 116, 537
DOI: 10.1007/s00170-021-07329-3

3D printing for ultra-precision machining: current status, opportunities, and future perspectives
Tao He, Wai Sze Yip, Edward Hengzhou Yan, Jiuxing Tang, Muhammad Rehan, Long Teng, Chi Ho Wong, Linhe Sun, Baolong Zhang, Feng Guo, Shaohe Zhang and Suet To
Front. Mech. Eng., 2024, 19
DOI: 10.1007/s11465-024-0792-4

Three-dimensional printed millifluidic devices for zebrafish embryo tests
Feng Zhu, Joanna Skommer, Niall P. Macdonald, Timo Friedrich, Jan Kaslin and Donald Wlodkowic
Biomicrofluidics, 2015, 9
DOI: 10.1063/1.4927379

3D‐printable thermochromic acrylic resin with excellent mechanical performance
A. Duan, Y. Li, B. Li and P. Zhu
J of Applied Polymer Sci, 2020, 137
DOI: 10.1002/app.48277

From bench to market: Regulatory and commercial challenges in clinical point-of-care biosensors
Isabella Sampaio, Fihama de Cassia Santos-Briceño, Laís C. Lopes, Marcus Augusto dos Santos Catai, Luiz Ricardo G. Silva, Jéssica S. Stefano and Laís Canniatti Brazaca
TrAC Trends in Analytical Chemistry, 2026, 199, 118819
DOI: 10.1016/j.trac.2026.118819

3D printed microfluidic viscometer based on the co-flowing stream
Hyeonji Hong, Jae Min Song and Eunseop Yeom
Biomicrofluidics, 2019, 13
DOI: 10.1063/1.5063425

Review of 3D-printing technologies for wearable and implantable bio-integrated sensors
Jinah Jang, Vega Pradana Rachim and Sung-Min Park
Essays in Biochemistry, 2021, 65, 491
DOI: 10.1042/EBC20200131

Direct ink writing of silicone elastomers to fabricate microfluidic devices and soft robots
Kento Yamagishi, Rahul Karyappa, Terry Ching and Michinao Hashimoto
MRS Communications, 2024, 14, 846
DOI: 10.1557/s43579-024-00631-7

3D microfluidics in PDMS: manufacturing with 3D molding
Tyler Richmond and Nathan Tompkins
Microfluid Nanofluid, 2021, 25
DOI: 10.1007/s10404-021-02478-z

Fabrication of a Malaria-Ab ELISA Bioassay Platform with Utilization of Syringe-Based and 3D Printed Assay Automation
Christopher Lim, Yangchung Lee and Lawrence Kulinsky
Micromachines, 2018, 9, 502
DOI: 10.3390/mi9100502

Taguchi Method for Investigation of Ultrasonication-Assisted Dissolution of Acrylonitrile Butadiene Styrene (ABS) Rod Enclosed Within Polydimethylsiloxane (PDMS) Bulk
Pinchuan Chen and Chung-Hsuan Chiang
IEEE Access, 2020, 8, 114910
DOI: 10.1109/ACCESS.2020.3003985

Current and future trends of additive manufacturing for chemistry applications: a review
Oyekunle Azeez Alimi and Reinout Meijboom
J Mater Sci, 2021, 56, 16824
DOI: 10.1007/s10853-021-06362-7

3D Cell Printing of Tissue/Organ-Mimicking Constructs for Therapeutic and Drug Testing Applications
Jongmin Kim, Jeong Sik Kong, Wonil Han, Byoung Soo Kim and Dong-Woo Cho
IJMS, 2020, 21, 7757
DOI: 10.3390/ijms21207757

A Versatile Photocrosslinkable Silicone Composite for 3D Printing Applications
Mecit Altan Alioglu, Yasar Ozer Yilmaz, Ethan Michael Gerhard, Vaibhav Pal, Deepak Gupta, Syed Hasan Askari Rizvi and Ibrahim T. Ozbolat
Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202301858

Quantitative Determination of 3D-Printing and Surface-Treatment Conditions for Direct-Printed Microfluidic Devices
Hyun Namgung, Abdi Mirgissa Kaba, Hyeonkyu Oh, Hyunjin Jeon, Jeonghwan Yoon, Haseul Lee and Dohyun Kim
BioChip J, 2022, 16, 82
DOI: 10.1007/s13206-022-00048-1

Time-efficient fabrication method for 3D-printed microfluidic devices
Yan Jin, Peng Xiong, Tongyu Xu and Jingyi Wang
Sci Rep, 2022, 12
DOI: 10.1038/s41598-022-05350-4

Lab-on-a-Chip for Cardiovascular Physiology and Pathology
Sean Beverung, Jingwen Wu and Robert Steward
Micromachines, 2020, 11, 898
DOI: 10.3390/mi11100898

Silicon Photonics Sensors for Biophotonic Applications—A Review
Chandresh Dhote, Anamika Singh and Santosh Kumar
IEEE Sensors J., 2022, 22, 18228
DOI: 10.1109/JSEN.2022.3199663

Inkjet 3D printing of microfluidic structures—on the selection of the printer towards printing your own microfluidic chips
Rafał Walczak and Krzysztof Adamski
J. Micromech. Microeng., 2015, 25, 085013
DOI: 10.1088/0960-1317/25/8/085013

On the Impact of the Fabrication Method on the Performance of 3D Printed Mixers
Mojtaba Zeraatkar, Daniel Filippini and Gianluca Percoco
Micromachines, 2019, 10, 298
DOI: 10.3390/mi10050298

3D Helical Micromixer Fabricated by Micro Lost‐Wax Casting
Daiki Tachibana, Ken Matsubara, Ryosuke Matsuda, Taichi Furukawa, Shoji Maruo, Yoshimi Tanaka, Ohmi Fuchiwaki and Hiroki Ota
Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.201900794

Evaluation and Optimization of Genomic DNA Extraction from Food Sample for Microfluidic Purpose
M. N. Afnan Uda, N. A. Parmin, Asral Bahari Jambek, U. Hashim, M. N. A. Uda and S. N. A. Shaharuddin
IOP Conf. Ser.: Mater. Sci. Eng., 2020, 743, 012031
DOI: 10.1088/1757-899X/743/1/012031

Elucidating the mechanism of overcuring in microchannels fabricated via vat photopolymerization (VPP) for precise microfluidic chip printing
Xinhui Wang, Jinghang Liu, Antony Seng Kai Kho, Weixin Hong, Michael D. Gilchrist and Nan Zhang
Additive Manufacturing, 2024, 92, 104350
DOI: 10.1016/j.addma.2024.104350

Enzymatic millifluidic devices for various applications and future prospects: A review
Mahbuba Jannat, Shawon Chowdhury Pantha and Kun-Lin Yang
Next Materials, 2026, 11, 101851
DOI: 10.1016/j.nxmate.2026.101851

Biomaterials-based 3D cell printing for next-generation therapeutics and diagnostics
Jinah Jang, Ju Young Park, Ge Gao and Dong-Woo Cho
Biomaterials, 2018, 156, 88
DOI: 10.1016/j.biomaterials.2017.11.030

Evaluation of cyclohexane pretreatment effect on the transfer of laser-textured surface from Ti-6Al-4V to UV-sensitive resin via UV-molding technique
Muhammad Budi Haryono and Tanant Waritanant
Heliyon, 2026, 12, e44717
DOI: 10.1016/j.heliyon.2026.e44717

A Benchmark Artifact to Evaluate the Manufacturing of Microfeatures by Digital Light Processing Stereolithography
Lara Rebaioli and Irene Fassi
Journal of Micro and Nano-Manufacturing, 2020, 8
DOI: 10.1115/1.4046042

Soft tubular microfluidics for 2D and 3D applications
Wang Xi, Fang Kong, Joo Chuan Yeo, Longteng Yu, Surabhi Sonam, Ming Dao, Xiaobo Gong and Chwee Teck Lim
Proc. Natl. Acad. Sci. U.S.A., 2017, 114, 10590
DOI: 10.1073/pnas.1712195114

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms
Niall P. Macdonald, Joan M. Cabot, Petr Smejkal, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore
Anal. Chem., 2017, 89, 3858
DOI: 10.1021/acs.analchem.7b00136

3D‐Printed Microfluidics
Anthony K. Au, Wilson Huynh, Lisa F. Horowitz and Albert Folch
Angew Chem Int Ed, 2016, 55, 3862
DOI: 10.1002/anie.201504382

Complex Assemblies of Colloidal Microparticles with Compliant DNA Linkers and Magnetic Actuation
Taryn Imamura, Nicholas Chung, Utku M. Sonmez, Matthew Travers, Sarah Bergbreiter and Rebecca E. Taylor
Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401584

Patient‐Specific Organoid and Organ‐on‐a‐Chip: 3D Cell‐Culture Meets 3D Printing and Numerical Simulation
Fuyin Zheng, Yuminghao Xiao, Hui Liu, Yubo Fan and Ming Dao
Advanced Biology, 2021, 5
DOI: 10.1002/adbi.202000024

Current and emerging trends in polymeric 3D printed microfluidic devices
Gustavo Gonzalez, Ignazio Roppolo, Candido Fabrizio Pirri and Annalisa Chiappone
Additive Manufacturing, 2022, 55, 102867
DOI: 10.1016/j.addma.2022.102867

High-throughput screening approaches and combinatorial development of biomaterials using microfluidics
David Barata, Clemens van Blitterswijk and Pamela Habibovic
Acta Biomaterialia, 2016, 34, 1
DOI: 10.1016/j.actbio.2015.09.009

Modular microfluidic systems cast from 3D-printed molds for imaging leukocyte adherence to differentially treated endothelial cultures
Rodrigo Hernández Vera, Paul O’Callaghan, Nikos Fatsis-Kavalopoulos and Johan Kreuger
Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-47475-z

Self‐Regulative Direct Ink Writing of Frontally Polymerizing Thermoset Polymers
Jia En Aw, Xiang Zhang, Arif Z. Nelson, Leon M. Dean, Mostafa Yourdkhani, Randy H. Ewoldt, Philippe H. Geubelle and Nancy R. Sottos
Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202200230

Harnessing the potential of emerging additive manufacturing technologies as a game-changer for chemical and biosensing innovations
Ashish Kalkal, Amit K Yadav, Damini Verma, Abhishek Sehgal, Gopinath Packirisamy and Dhiraj Bhatia
Rep. Prog. Phys., 2025, 88, 086701
DOI: 10.1088/1361-6633/adf7ba

Inkjet 3D printed modular microfluidic chips for on-chip gel electrophoresis
Rafał Walczak, Krzysztof Adamski and Wojciech Kubicki
J. Micromech. Microeng., 2019, 29, 057001
DOI: 10.1088/1361-6439/ab0e64

Lab-on-a-chip devices: How to close and plug the lab?
Yuksel Temiz, Robert D. Lovchik, Govind V. Kaigala and Emmanuel Delamarche
Microelectronic Engineering, 2015, 132, 156
DOI: 10.1016/j.mee.2014.10.013

Universal method for fabricating PDMS microfluidic device using SU8, 3D printing and soft lithography
Charmi Chande, Nida Riaz, Victoria Harbour, Hathija Noor, Monica Torralba, Yu-Hsuan Cheng, Zhenglong Li, Anh Tong, Roman Voronov and Sagnik Basuray
Technology, 2020, 08, 50
DOI: 10.1142/S2339547820500041

3D printed microfluidic devices for circulating tumor cells (CTCs) isolation
Juhong Chen, Chun-Yen Liu, Xinchang Wang, Eric Sweet, Nathaniel Liu, Xiaohua Gong and Liwei Lin
Biosensors and Bioelectronics, 2020, 150, 111900
DOI: 10.1016/j.bios.2019.111900

Combining stereolithography and replica molding: On the way to superhydrophobic polymeric devices for photovoltaics
Caterina Credi, Diego Pintossi, Claudia L. Bianchi, Marinella Levi, Gianmarco Griffini and Stefano Turri
Materials & Design, 2017, 133, 143
DOI: 10.1016/j.matdes.2017.07.068

Fabrication and Applications of Microfluidic Devices: A Review
Adelina-Gabriela Niculescu, Cristina Chircov, Alexandra Cătălina Bîrcă and Alexandru Mihai Grumezescu
IJMS, 2021, 22, 2011
DOI: 10.3390/ijms22042011

Navigating the future: Microfluidics charting new routes in drug delivery
Mohammad Mohammadi, Syamand Ahmed Qadir, Aryan Mahmood Faraj, Osama Hamid Shareef, Hassan Mahmoodi, Fatemeh Mahmoudi and Sajad Moradi
International Journal of Pharmaceutics, 2024, 124142
DOI: 10.1016/j.ijpharm.2024.124142

Bioprinters for organs-on-chips
Amir K Miri, Ebrahim Mostafavi, Danial Khorsandi, Shu-Kai Hu, Matthew Malpica and Ali Khademhosseini
Biofabrication, 2019, 11, 042002
DOI: 10.1088/1758-5090/ab2798

Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production
Chia-Wen Tsao
Micromachines, 2016, 7, 225
DOI: 10.3390/mi7120225

Integration of biosensors based on microfluidic: a review
Amin TermehYousefi, Samira Bagheri and Nahrizul Adib
Sensor Review, 2015, 35, 190
DOI: 10.1108/SR-09-2014-697

Review on Recent Advances in Drug Development by Using 3D Printing Technology
G. R. Shiva Charan, M. Akiful Haque, Dibyalochan Mohanty and Vasudha Bakshi
Pharm Chem J, 2022, 56, 270
DOI: 10.1007/s11094-022-02630-1

A 3D-printed microfluidic-enabled hollow microneedle architecture for transdermal drug delivery
Christopher Yeung, Shawnus Chen, Brian King, Haisong Lin, Kimber King, Farooq Akhtar, Gustavo Diaz, Bo Wang, Jixiang Zhu, Wujin Sun, Ali Khademhosseini and Sam Emaminejad
Biomicrofluidics, 2019, 13
DOI: 10.1063/1.5127778

3D printing of hollow geometries using blocking liquid substitution stereolithography
Aftab A. Bhanvadia, Richard T. Farley, Youngwook Noh and Toshikazu Nishida
Sci Rep, 2023, 13
DOI: 10.1038/s41598-022-26684-z

Additive Manufacturing in Fluid Process Engineering
Tim Femmer, Ina Flack and Matthias Wessling
Chemie Ingenieur Technik, 2016, 88, 535
DOI: 10.1002/cite.201500086

Inkjet 3D Printed MEMS Vibrational Electromagnetic Energy Harvester
Bartosz Kawa, Krzysztof Śliwa, Vincent Lee, Qiongfeng Shi and Rafał Walczak
Energies, 2020, 13, 2800
DOI: 10.3390/en13112800

Advances in three-dimensional rapid prototyping of microfluidic devices for biological applications
P. F. O'Neill, A. Ben Azouz, M. Vázquez, J. Liu, S. Marczak, Z. Slouka, H. C. Chang, D. Diamond and D. Brabazon
Biomicrofluidics, 2014, 8
DOI: 10.1063/1.4898632

Feasibility study of silicone stereolithography with an optically created dead zone
Dong Sung (Danny) Kim, Jakkrit Suriboot, Melissa A. Grunlan and Bruce L. Tai
Additive Manufacturing, 2019, 29, 100793
DOI: 10.1016/j.addma.2019.100793

Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays
Jakub Novotny, Zuzana Svobodova, Marie Ilicova, Dominika Hruskova, Jana Kostalova, Zuzana Bilkova and Frantisek Foret
Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06512-z

Microfluidic channel volume optimization and calibration in accordance with ISO 17025 and ISO 4787 standards
Arzum Işıtan, Serhat Özbey, Mahmed Sari Njjar, Fatih Taşçıoğlu and Ahmet Koluman
MRS Commun., 2025, 15, 999
DOI: 10.1557/s43579-025-00721-0

A combined 3D printing/CNC micro-milling method to fabricate a large-scale microfluidic device with the small size 3D architectures: an application for tumor spheroid production
Ebrahim Behroodi, Hamid Latifi, Zeinab Bagheri, Esra Ermis, Shabnam Roshani and Mohammadreza Salehi Moghaddam
Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-79015-5

3D Printed Multimaterial Microfluidic Transistors
Alireza Ahmadianyazdi, Wei Huang, Kaustav A. Gopinathan, Ivan Stepanov, Lisa Horowitz, Ting‐Yuan Tu, Mehmet Toner and Albert Folch
Adv Materials Technologies, 2026
DOI: 10.1002/admt.202501509

Overview study on challenges of additive manufacturing for a healthcare application
Y W Adugna, A D Akessa and H G Lemu
IOP Conf. Ser.: Mater. Sci. Eng., 2021, 1201, 012041
DOI: 10.1088/1757-899X/1201/1/012041

3D-printed microfluidics on thin poly(methyl methacrylate) substrates for genetic applications
Valentina Bertana, Cristina Potrich, Giorgio Scordo, Luciano Scaltrito, Sergio Ferrero, Andrea Lamberti, Francesco Perrucci, Candido Fabrizio Pirri, Cecilia Pederzolli, Matteo Cocuzza and Simone Luigi Marasso
Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 2018, 36
DOI: 10.1116/1.5003203

A continuous polymerase chain reaction 3D spiral microreactor capable of facile and on-demand fabrication
Qiushuang Yang, Wenchao Zhou, Huan Li, Jialing Huang, Zeyuan Song, Long Cheng, Yihui Wu and Deqiang Mu
Analytica Chimica Acta, 2024, 1310, 342692
DOI: 10.1016/j.aca.2024.342692

Development of a Custom-Made 3D Printing Protocol with Commercial Resins for Manufacturing Microfluidic Devices
Francesc Subirada, Roberto Paoli, Jessica Sierra-Agudelo, Anna Lagunas, Romen Rodriguez-Trujillo and Josep Samitier
Polymers, 2022, 14, 2955
DOI: 10.3390/polym14142955

Inkjet 3D printed check microvalve
Rafał Walczak, Krzysztof Adamski and Danylo Lizanets
J. Micromech. Microeng., 2017, 27, 047002
DOI: 10.1088/1361-6439/aa6152

Biomimetic epithelium/endothelium on chips
Lina Lin, Xiaocheng Wang, Mengying Niu, Qiaolin Wu, Huan Wang, Yan Zu and Weijian Wang
Engineered Regeneration, 2022, 3, 201
DOI: 10.1016/j.engreg.2022.05.001

Organoid-on-a-chip: Current challenges, trends, and future scope toward medicine
Zhangjie Li, Qinyu Li, Chenyang Zhou, Kangyi Lu, Yijun Liu, Lian Xuan and Xiaolin Wang
Biomicrofluidics, 2023, 17
DOI: 10.1063/5.0171350

Rapid assembly of PMMA microfluidic devices with PETE membranes for studying the endothelium
Henrik Persson, Siwan Park, Michael Mohan, Ka Kit Cheung, Craig A. Simmons and Edmond W.K. Young
Sensors and Actuators B: Chemical, 2022, 356, 131342
DOI: 10.1016/j.snb.2021.131342

Additive Manufacturing Sensor for Stress Biomarker Detection
Vinicius A. O. P. da Silva, Jéssica S. Stefano, Cristiane Kalinke, Juliano A. Bonacin and Bruno C. Janegitz
Chemosensors, 2023, 11, 306
DOI: 10.3390/chemosensors11050306

Current Advances and Applications of Diagnostic Microfluidic Chip: A Review
Garima Katyal, Anuj Pathak, Parul Grover and Vaibhav Sharma
CDTH, 2024, 19, 694
DOI: 10.2174/0115748855269330240122100529

3D Printed Microfluidic Mixers—A Comparative Study on Mixing Unit Performances
Anton Enders, Ina G. Siller, Katharina Urmann, Michael R. Hoffmann and Janina Bahnemann
Small, 2019, 15
DOI: 10.1002/smll.201804326

Fabrication Techniques for Production of Thermoplastic-Based Microfluidics Devices
Zhenfeng Wang
J. Mol. Eng. Mater., 2016, 04, 1640016
DOI: 10.1142/S2251237316400165

Fabrication Methods for Microfluidic Devices: An Overview
Simon Scott and Zulfiqur Ali
Micromachines, 2021, 12, 319
DOI: 10.3390/mi12030319

Fabrication and characterization of interdigital transducer structures as temperature sensors by two-photon lithography
Tayyab Waqar, Borui Li, Sezgin Ersoy, Safi Jradi, Serge Ravaine and Andreas Dietzel
J. meas. eng., 2025, 13, 1
DOI: 10.21595/jme.2024.23964

Fabrication of 3D PDMS Microchannels of Adjustable Cross-Sections via Versatile Gel Templates
Pui Fai Ng, Ka I Lee, Mo Yang and Bin Fei
Polymers, 2019, 11, 64
DOI: 10.3390/polym11010064

Electrochemiluminescence at Bare and DNA-Coated Graphite Electrodes in 3D-Printed Fluidic Devices
Gregory W. Bishop, Jennifer E. Satterwhite-Warden, Itti Bist, Eric Chen and James F. Rusling
ACS Sens., 2016, 1, 197
DOI: 10.1021/acssensors.5b00156

Additive manufacturing for energy: A review
Cheng Sun, Yun Wang, Michael D. McMurtrey, Nathan D. Jerred, Frank Liou and Ju Li
Applied Energy, 2021, 282, 116041
DOI: 10.1016/j.apenergy.2020.116041

A Regression Approach to Model Refractive Index Measurements of Novel 3D Printable Photocurable Resins for Micro-Optofluidic Applications
Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Giovanna Stella, Gianluca Cicala and Maide Bucolo
Polymers, 2023, 15, 2690
DOI: 10.3390/polym15122690

Effect of a red-shifted benzotriazole UV absorber on curing depth and kinetics in visible light initiated photopolymer resins for 3D printing
Robert Bail, Ji Yoon Hong and Byung Doo Chin
Journal of Industrial and Engineering Chemistry, 2016, 38, 141
DOI: 10.1016/j.jiec.2016.04.017

Advances in Microfluidic Systems and Numerical Modeling in Biomedical Applications: A Review
Mariana Ferreira, Violeta Carvalho, João Ribeiro, Rui A. Lima, Senhorinha Teixeira and Diana Pinho
Micromachines, 2024, 15, 873
DOI: 10.3390/mi15070873

Three-dimensional printing-based electro-millifluidic devices for fabricating multi-compartment particles
Qiu Lan Chen, Zhou Liu and Ho Cheung Shum
Biomicrofluidics, 2014, 8
DOI: 10.1063/1.4902929

A Laser-Micromachined PCB Electrolytic Micropump Using an Oil-Based Electrolyte Separation Barrier
Seonhyeok Baek, Hakhyun Kim, Heewon Hwang, Abdi Mirgissa Kaba, Hyeonsik Kim, Minsub Chung, Jintae Kim and Dohyun Kim
BioChip J, 2023, 17, 244
DOI: 10.1007/s13206-023-00100-8

Open Microfluidic Cell Culture in Hydrogels Enabled by 3D-Printed Molds
Madison O’Brien, Ashley N. Spirrison, Melati S. Abdul Halim, Yulai Li, Adrian Neild, Catherine Gemrich, Reza Nosrati, Luis Solorio and Max M. Gong
Bioengineering, 2025, 12, 102
DOI: 10.3390/bioengineering12020102

Democratizing Access to Microfluidics: Rapid Prototyping of Open Microchannels with Low-Cost LCD 3D Printers
Kelsey M. Leong, Aileen Y. Sun, Mindy L. Quach, Carrie H. Lin, Cosette A. Craig, Felix Guo, Timothy R. Robinson, Megan M. Chang and Ayokunle O. Olanrewaju
ACS Omega, 2024, 9, 45537
DOI: 10.1021/acsomega.4c07776

A 3D printing approach to intelligent food packaging
Chantal T. Tracey, Aleksandra L. Predeina, Elena F. Krivoshapkina and Eugenia Kumacheva
Trends in Food Science & Technology, 2022, 127, 87
DOI: 10.1016/j.tifs.2022.05.003

Assessment of the biocompatibility of three-dimensional-printed polymers using multispecies toxicity tests
Feng Zhu, Timo Friedrich, Dayanthi Nugegoda, Jan Kaslin and Donald Wlodkowic
Biomicrofluidics, 2015, 9
DOI: 10.1063/1.4939031

Light‐Directed Liquid Manipulation in Flexible Bilayer Microtubes
Bo Xu, Chongyu Zhu, Lang Qin, Jia Wei and Yanlei Yu
Small, 2019, 15
DOI: 10.1002/smll.201901847

Luer-lock valve: A pre-fabricated pneumatic valve for 3D printed microfluidic automation
Minghao Nie and Shoji Takeuchi
Biomicrofluidics, 2020, 14
DOI: 10.1063/5.0020531

Application of 3D Printing Technology in Microreactor Fabrication
Jinhao Zheng, Yifan Niu, Ziyu Song, Na Li and Shaohua Ju
JOM, 2025, 77, 415
DOI: 10.1007/s11837-024-06961-0

Creating 3D printed magnetic devices with ferrofluids and liquid metals
Nathan Lazarus, Sarah S. Bedair and Gabriel L. Smith
Additive Manufacturing, 2019, 26, 15
DOI: 10.1016/j.addma.2018.12.012

Recent Advances in Thermoplastic Microfluidic Bonding
Kiran Giri and Chia-Wen Tsao
Micromachines, 2022, 13, 486
DOI: 10.3390/mi13030486

Microfluidic Cell Chips for High-Throughput Drug Screening
Chun-Wei Chi, AH Rezwanuddin Ahmed, Zeynep Dereli-Korkut and Sihong Wang
Bioanalysis, 2016, 8, 921
DOI: 10.4155/bio-2016-0028

Fabrication of Complex 3D Fluidic Networks via Modularized Stereolithography
Terry Ching, Yi-Chin Toh and Michinao Hashimoto
Adv Eng Mater, 2020, 22
DOI: 10.1002/adem.201901109

Inkjet 3D printed microfluidic device for growing seed root and stalk mechanical characterization
Rafał Walczak, Bartosz Kawa and Krzysztof Adamski
Sensors and Actuators A: Physical, 2019, 297, 111557
DOI: 10.1016/j.sna.2019.111557

Moving from millifluidic to truly microfluidic sub-100-μm cross-section 3D printed devices
Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley
Anal Bioanal Chem, 2017, 409, 4311
DOI: 10.1007/s00216-017-0398-3

Advances in engineering immune–tumor microenvironments on-a-chip: integrative microfluidic platforms for immunotherapy and drug discovery
Farnaz Dabbagh Moghaddam, Ali Anvar, Ehsan Ilkhani, Delara Dadgar, Maedeh Rafiee, Najmeh Ranjbaran, Pejman Mortazavi, Seyed Majid Ghoreishian, Yun Suk Huh and Pooyan Makvandi
Mol Cancer, 2025, 24
DOI: 10.1186/s12943-025-02479-4

Spectrophotometry in modular microfluidic architectures
Bryant Thompson, Krisna C. Bhargava, Alexander T. Czaja, Bin Pan, Brian T. Samuelsen and Noah Malmstadt
Biomicrofluidics, 2019, 13
DOI: 10.1063/1.5124303

A polymer-film inertial microfluidic sorter fabricated by jigsaw puzzle method for precise size-based cell separation
Zhixian Zhu, Dan Wu, Shuang Li, Yu Han, Nan Xiang, Cailian Wang and Zhonghua Ni
Analytica Chimica Acta, 2021, 1143, 306
DOI: 10.1016/j.aca.2020.11.001

Low Cost, Ease-of-Access Fabrication of Microfluidic Devices Using Wet Paper Molds
Raviraj Thakur and Gene Y. Fridman
Micromachines, 2022, 13, 1408
DOI: 10.3390/mi13091408

3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches
Henry H. Hwang, Wei Zhu, Grace Victorine, Natalie Lawrence and Shaochen Chen
Small Methods, 2018, 2
DOI: 10.1002/smtd.201700277

Current and future impact of 3D printing on the separation sciences
Umme Kalsoom, Pavel N. Nesterenko and Brett Paull
TrAC Trends in Analytical Chemistry, 2018, 105, 492
DOI: 10.1016/j.trac.2018.06.006

Fused Deposition Modeling of Chemically Resistant Microfluidic Chips in Polyvinylidene Fluoride
Christof Rein, Leonhard Hambitzer, Zahra Soraya, Han Zhang, Henning J. Jessen, Frederik Kotz-Helmer and Bastian E. Rapp
Micromachines, 2024, 15, 1391
DOI: 10.3390/mi15111391

Preparation and performance of silicone-modified 3D printing photosensitive materials
Jin Chen, Lu Zheng, Wenwen Zhou, Min Liu, Yuyu Gao and Jiaqiang Xie
e-Polymers, 2023, 23
DOI: 10.1515/epoly-2023-0110

3D Printed Multimaterial Microfluidic Valve
Steven J. Keating, Maria Isabella Gariboldi, William G. Patrick, Sunanda Sharma, David S. Kong, Neri Oxman and Dario Pisignano
PLoS ONE, 2016, 11, e0160624
DOI: 10.1371/journal.pone.0160624

Dual Sacrificial Molding: Fabricating 3D Microchannels with Overhang and Helical Features
Wei Huang Goh and Michinao Hashimoto
Micromachines, 2018, 9, 523
DOI: 10.3390/mi9100523

Hydrodynamic behavior of a novel 3D-printed nature-inspired microreactor with a high length-to-surface ratio
Inmaculada García-López, Vicente Ismael Águeda and Amalio Garrido-Escudero
Chemical Engineering Journal Advances, 2023, 13, 100438
DOI: 10.1016/j.ceja.2022.100438

Commercialization of 3D-Printed Microfluidic Devices
Reza Amin, Ashwini Joshi and Savas Tasoglu
J. 3D Print. Med., 2017, 1, 85
DOI: 10.2217/3dp-2016-0010

Direct photoimmobilization of extraction disks on “green state” 3D printed devices
Carlos Calderilla, Fernando Maya, Víctor Cerdà and Luz O. Leal
Talanta, 2019, 202, 67
DOI: 10.1016/j.talanta.2019.04.026

Mechanical isotropy and postcure shrinkage of polydimethylsiloxane printed with digital light processing
Dong Sung (Danny) Kim, Jakkrit Suriboot, Chin-Cheng Shih, Austin Cwiklik, Melissa A. Grunlan and Bruce L. Tai
RPJ, 2020, 26, 1447
DOI: 10.1108/RPJ-10-2019-0255

Emerging Droplet Microfluidics
Luoran Shang, Yao Cheng and Yuanjin Zhao
Chem. Rev., 2017, 117, 7964
DOI: 10.1021/acs.chemrev.6b00848

Printability analysis in additive manufacturing
Radu I. Corcodel and Horea T. Ilies
Computer-Aided Design and Applications, 2018, 15, 318
DOI: 10.1080/16864360.2017.1397883

3D printed microfluidic devices with integrated valves
Chad I. Rogers, Kamran Qaderi, Adam T. Woolley and Gregory P. Nordin
Biomicrofluidics, 2015, 9
DOI: 10.1063/1.4905840

A 3D-printed microbial cell culture platform with in situ PEGDA hydrogel barriers for differential substrate delivery
Andrea L. Kadilak, Jessica C. Rehaag, Cameron A. Harrington and Leslie M. Shor
Biomicrofluidics, 2017, 11
DOI: 10.1063/1.5003477

A 3D-Printed Oxygen Control Insert for a 24-Well Plate
Martin D. Brennan, Megan L. Rexius-Hall, David T. Eddington and Arum Han
PLoS ONE, 2015, 10, e0137631
DOI: 10.1371/journal.pone.0137631