Brian J. O'Grady, Michael D. Geuy, Hyosung Kim, Kylie M. Balotin, Everett R. Allchin, David C. Florian, Neelansh N. Bute, Taylor E. Scott, Gregory B. Lowen, Colin M. Fricker, Matthew L. Fitzgerald, Scott A. Guelcher, John P. Wikswo, Leon M. Bellan and Ethan S. Lippmann

Lab Chip, 2021, 21, 4814
DOI: 10.1039/D1LC00744K

3D printed microfluidic devices: enablers and barriers

Sidra Waheed, Joan M. Cabot, Niall P. Macdonald, Trevor Lewis, Rosanne M. Guijt, Brett Paull and Michael C. Breadmore

Lab Chip, 2016, 16, 1993
DOI: 10.1039/C6LC00284F

Monolithic multilayer microfluidics via sacrificial molding of 3D-printed isomalt

Matthew K. Gelber and Rohit Bhargava

Lab Chip, 2015, 15, 1736
DOI: 10.1039/C4LC01392A

A 3D printed device for quantitative enzymatic detection using cell phones

G. Comina, A. Suska and D. Filippini

Anal. Methods, 2016, 8, 6135
DOI: 10.1039/C6AY01714B

Design and development of 3D printed catalytically-active stirrers for chemical synthesis

Matthew R. Penny and Stephen T. Hilton

React. Chem. Eng., 2020, 5, 853
DOI: 10.1039/C9RE00492K

Biomarker detection for disease diagnosis using cost-effective microfluidic platforms

Sharma T. Sanjay, Guanglei Fu, Maowei Dou, Feng Xu, Rutao Liu, Hao Qi and XiuJun Li

Analyst, 2015, 140, 7062
DOI: 10.1039/C5AN00780A

Macro-to-micro interfacing to microfluidic channels using 3D-printed templates: application to time-resolved secretion sampling of endocrine tissue

Jessica C. Brooks, Katarena I. Ford, Dylan H. Holder, Mark D. Holtan and Christopher J. Easley

Analyst, 2016, 141, 5714
DOI: 10.1039/C6AN01055E

Upscaling of pneumatic membrane valves for the integration of 3D cell cultures on chip

Nina Compera, Scott Atwell, Johannes Wirth, Bernhard Wolfrum and Matthias Meier

Lab Chip, 2021, 21, 2986
DOI: 10.1039/D1LC00194A

Light-based 3D printing and post-treatments of moulds for PDMS soft lithography

Bastien Venzac

Lab Chip, 2025, 25, 2129
DOI: 10.1039/D4LC00836G

Uniformity of spheroids-on-a-chip by surface treatment of PDMS microfluidic platforms

Neda Azizipour, Rahi Avazpour, Mohamad Sawan, Derek H. Rosenzweig and Abdellah Ajji

Sens. Diagn., 2022, 1, 750
DOI: 10.1039/D2SD00004K

Fabrication of polymeric biomaterials: a strategy for tissue engineering and medical devices

Ferdous Khan, Masaru Tanaka and Sheikh Rafi Ahmad

J. Mater. Chem. B, 2015, 3, 8224
DOI: 10.1039/C5TB01370D

Recent developments and future perspectives of microfluidics and smart technologies in wearable devices

Sasikala Apoorva, Nam-Trung Nguyen and Kamalalayam Rajan Sreejith

Lab Chip, 2024, 24, 1833
DOI: 10.1039/D4LC00089G

Rapid prototyping of microchannels with surface patterns for fabrication of polymer fibers

Payton J. Goodrich, Farrokh Sharifi and Nastaran Hashemi

RSC Adv., 2015, 5, 71203
DOI: 10.1039/C5RA15154F

3D printed conformal microfluidics for isolation and profiling of biomarkers from whole organs

Manjot Singh, Yuxin Tong, Kelly Webster, Ellen Cesewski, Alexander P. Haring, Sahil Laheri, Bill Carswell, Timothy J. O'Brien, Charles H. Aardema, Ryan S. Senger, John L. Robertson and Blake N. Johnson

Lab Chip, 2017, 17, 2561
DOI: 10.1039/C7LC00468K

Recent Progress in 3D Printed Mold-Based Sensors

Shan He, Shilun Feng, Anindya Nag, Nasrin Afsarimanesh, Tao Han and Subhas Chandra Mukhopadhyay

Sensors, 2020, 20, 703
DOI: 10.3390/s20030703

Full Factorial Microfluidic Designs and Devices for Parallelizing Human Pluripotent Stem Cell Differentiation

Duncan M. Chadly, Andrew M. Oleksijew, Kyle S. Coots, Jose J. Fernandez, Shun Kobayashi, John A. Kessler and Akihiro J. Matsuoka

SLAS Technology, 2019, 24, 41
DOI: 10.1177/2472630318783497

3D printing for chemical, pharmaceutical and biological applications

Andrew J. Capel, Rowan P. Rimington, Mark P. Lewis and Steven D. R. Christie

Nat Rev Chem, 2018, 2, 422
DOI: 10.1038/s41570-018-0058-y

Microengineering the Liver: Strategies for Constructing Functional Liver‐on‐a‐Chip Devices

Jie Wang, Ziwei Liang, Jiapu Wang, Zongyi Li, Shaojie Wang, Yan Wei, Xin Xie and Di Huang

Exploration, 2026
DOI: 10.1002/exp2.70137

Adhesive tape-assisted etching of silk fibroin film with LiBr aqueous solution for microfluidic devices

Xiaobai Li, Linxiang Wang, Gang Xiao, Yan Qiao, Feng Wang, Qingyou Xia, Ling Yu and Zhisong Lu

Materials Science and Engineering: C, 2021, 118, 111543
DOI: 10.1016/j.msec.2020.111543

3D-printed miniaturized fluidic tools in chemistry and biology

C.K. Dixit, K. Kadimisetty and J. Rusling

TrAC Trends in Analytical Chemistry, 2018, 106, 37
DOI: 10.1016/j.trac.2018.06.013

Low-cost, versatile, and highly reproducible microfabrication pipeline to generate 3D-printed customised cell culture devices with complex designs

Cathleen Hagemann, Matthew C. D. Bailey, Eugenia Carraro, Ksenia S. Stankevich, Valentina Maria Lionello, Noreen Khokhar, Pacharaporn Suklai, Carmen Moreno-Gonzalez, Kelly O’Toole, George Konstantinou, Christina L. Dix, Sudeep Joshi, Eleonora Giagnorio, Mads S. Bergholt, Christopher D. Spicer, Albane Imbert, Francesco Saverio Tedesco, Andrea Serio and Chaitan Khosla

PLoS Biol, 2024, 22, e3002503
DOI: 10.1371/journal.pbio.3002503

Enhanced physicochemical properties of polydimethylsiloxane based microfluidic devices and thin films by incorporating synthetic micro-diamond

Sidra Waheed, Joan M. Cabot, Niall P. Macdonald, Umme Kalsoom, Syamak Farajikhah, Peter C. Innis, Pavel N. Nesterenko, Trevor W. Lewis, Michael C. Breadmore and Brett Paull

Sci Rep, 2017, 7
DOI: 10.1038/s41598-017-15408-3

A Low-Cost, High-Resolution Thermoplastic Microfluidic Probe for Mass Spectrometry Imaging of Biological Tissue Samples

Xiangtang Li, Hang Hu, Manxi Yang and Julia Laskin

Anal. Chem., 2025, 97, 3207
DOI: 10.1021/acs.analchem.4c06087

Stereolithography 3D Printer for Micromodel Fabrications with Comprehensive Accuracy Evaluation by Using Microtomography

Anindityo Patmonoaji, Mohammmad Azis Mahardika, Muhammad Nasir, Yun She, Weicen Wang, Muhammad Akhsin Muflikhun and Tetsuya Suekane

Geosciences, 2022, 12, 183
DOI: 10.3390/geosciences12050183

Sensing Microorganisms Using Rapid Detection Methods: Supramolecular Approaches

Hiya Lahiri and Kingshuk Basu

Biosensors, 2025, 15, 130
DOI: 10.3390/bios15030130

A novel micromixer based on coastal fractal for manufacturing controllable size liposome

Xinkun Chen, Junlong Zhai and Xueye Chen

Physics of Fluids, 2024, 36
DOI: 10.1063/5.0239840

Fully 3D-Printed Preconcentrator for Selective Extraction of Trace Elements in Seawater

Cheng-Kuan Su, Pei-Jin Peng and Yuh-Chang Sun

Anal. Chem., 2015, 87, 6945
DOI: 10.1021/acs.analchem.5b01599

Polymer-dispersed liquid crystal elastomers

Andraž Rešetič, Jerneja Milavec, Blaž Zupančič, Valentina Domenici and Boštjan Zalar

Nat Commun, 2016, 7
DOI: 10.1038/ncomms13140

The Criterion of the Cassie–Baxter and Wenzel Wetting Modes and the Effect of Elastic Substrates on It

Il Woong Park, Jonas M. Ribe, Maria Fernandino and Carlos A. Dorao

Adv Materials Inter, 2023, 10
DOI: 10.1002/admi.202202439

3D printed microfluidic devices: a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

Viraj Mehta and Subha N. Rath

Bio-des. Manuf., 2021, 4, 311
DOI: 10.1007/s42242-020-00112-5

Characterization of PDMS Microchannels Using Horizontally or Vertically Formed 3D-Printed Molds by Digital Light Projection

Dong Hyun Han, Untaek Oh and Je-Kyun Park

ACS Omega, 2023, 8, 19128
DOI: 10.1021/acsomega.3c02933

A Bubble-Free Microfluidic Device for Easy-to-Operate Immobilization, Culturing and Monitoring of Zebrafish Embryos

Zhen Zhu, Yangye Geng, Zhangyi Yuan, Siqi Ren, Meijing Liu, Zhaozheng Meng and Dejing Pan

Micromachines, 2019, 10, 168
DOI: 10.3390/mi10030168

Dynamics of Capillary-Driven Flow in 3D Printed Open Microchannels

Robert K. Lade, Erik J. Hippchen, Christopher W. Macosko and Lorraine F. Francis

Langmuir, 2017, 33, 2949
DOI: 10.1021/acs.langmuir.6b04506

Interconnectable 3D-printed sample processing modules for portable mycotoxin screening of intact wheat

Anouk J. Bosman, Stephan Freitag, Georgina M.S. Ross, Michael Sulyok, Rudolf Krska, Francesco Simone Ruggeri and Gert IJ. Salentijn

Analytica Chimica Acta, 2024, 1285, 342000
DOI: 10.1016/j.aca.2023.342000

Inkjet 3D printed check microvalve

Rafał Walczak, Krzysztof Adamski and Danylo Lizanets

J. Micromech. Microeng., 2017, 27, 047002
DOI: 10.1088/1361-6439/aa6152

Biomimetic Urethra‐on‐a‐Chip Platform for Modelling Fibrosis: 3D‐Printing and Near‐Field Electrospinning in BAM‐Functionalized Microenvironment

Jiafu Liu, Wenzhuo Fang, Kai Wang, Zhidong Ma, Jie Yan, Ming Yang, Yangwang Jin, Meng Liu, Xi Yang, Wenyao Li, Qiang Fu, Yaopeng Zhang and Kaile Zhang

Advanced Materials, 2026, 38
DOI: 10.1002/adma.202521431

Online Detection of Peroxidase Using 3D Printing, Active Magnetic Mixing, and Spectra Analysis

Shanshan Bai, Chengqi Gan, Gaozhe Cai, Lei Wang, Mingyong Chen, Qingan Han and Jianhan Lin

BioMed Research International, 2017, 2017, 1
DOI: 10.1155/2017/5031809

A combined 3D printing/CNC micro-milling method to fabricate a large-scale microfluidic device with the small size 3D architectures: an application for tumor spheroid production

Ebrahim Behroodi, Hamid Latifi, Zeinab Bagheri, Esra Ermis, Shabnam Roshani and Mohammadreza Salehi Moghaddam

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-79015-5

Analysis of different shapes of cross-sections and obstacles in variable-radius spiral micromixers on mixing efficiency

Yuan Jiang, Bi Zhang, Yun Tian, Yan Zhang and Yunfei Chen

Chemical Engineering and Processing - Process Intensification, 2022, 171, 108756
DOI: 10.1016/j.cep.2021.108756

Intelligent Soft Surgical Robots for Next‐Generation Minimally Invasive Surgery

Jiaqi Zhu, Liangxiong Lyu, Yi Xu, Huageng Liang, Xiaoping Zhang, Han Ding and Zhigang Wu

Advanced Intelligent Systems, 2021, 3
DOI: 10.1002/aisy.202100011

Room temperature roll-to-roll additive manufacturing of polydimethylsiloxane-based centrifugal microfluidic device for on-site isolation of ribonucleic acid from whole blood

Trung Hoang, Han Truong, Jiyeon Han, Saebom Lee, Jihyeong Lee, Sajjan Parajuli, Jinkee Lee and Gyoujin Cho

Materials Today Bio, 2023, 23, 100838
DOI: 10.1016/j.mtbio.2023.100838

3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological Applications

Megan Carve and Donald Wlodkowic

Micromachines, 2018, 9, 91
DOI: 10.3390/mi9020091

Recent advances in 3D-printing-based organ-on-a-chip

Xinkun Wu, Wenwan Shi, Xiaojiang Liu and Zhongze Gu

EngMedicine, 2024, 1, 100003
DOI: 10.1016/j.engmed.2024.100003

Development of a Microwell System for Reproducible Formation of Homogeneous Cell Spheroids

Miguel A. Reina Mahecha, Ginevra Mariani, Pauline E. M. van Schaik, Paulien Schaafsma, Theo G. van Kooten, Prashant K. Sharma and Inge S. Zuhorn

Pharmaceutics, 2025, 18, 56
DOI: 10.3390/pharmaceutics18010056

Rapid Softlithography Using 3D‐Printed Molds

Sajad Razavi Bazaz, Navid Kashaninejad, Shohreh Azadi, Kamal Patel, Mohsen Asadnia, Dayong Jin and Majid Ebrahimi Warkiani

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201900425

A novel, low cost, and accessible method for rapid fabrication of the modifiable microfluidic devices

Mohsen Annabestani, Pouria Esmaeili-Dokht and Mehdi Fardmanesh

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-73535-w

An easily fabricated three-dimensional threaded lemniscate-shaped micromixer for a wide range of flow rates

Mehdi Rafeie, Marcel Welleweerd, Amin Hassanzadeh-Barforoushi, Mohsen Asadnia, Wouter Olthuis and Majid Ebrahimi Warkiani

Biomicrofluidics, 2017, 11
DOI: 10.1063/1.4974904

Accessing multidimensional mixing via 3D printing and showerhead micromixer design

Haomiao Zhang, Thomas Kopfmüller, Ramona Achermann, Jisong Zhang, Andrew Teixeira, Yi Shen and Klavs F. Jensen

AIChE Journal, 2020, 66
DOI: 10.1002/aic.16873

Modular microfluidic systems cast from 3D-printed molds for imaging leukocyte adherence to differentially treated endothelial cultures

Rodrigo Hernández Vera, Paul O’Callaghan, Nikos Fatsis-Kavalopoulos and Johan Kreuger

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-47475-z

Physics-informed and data-driven thermal modeling and temperature field prediction for thermal field-assisted direct ink writing with PDMS

Xinhua Yao, Yuhan Jiang, Lixin Tian, Xiang Li and Yong He

Materials & Design, 2025, 256, 114284
DOI: 10.1016/j.matdes.2025.114284

Silicone cure inhibition with material jetting additive manufacturing utilized for facial prosthesis fabrication – A clinical report

Chen Chen, Denny Chao and Jay Jayanetti

Journal of Prosthodontics, 2026, 35, 18
DOI: 10.1111/jopr.13968

Curing Temperature Effects on the Tensile Properties and Hardness of γ −Fe2O3 Reinforced PDMS Nanocomposites

Yvonne Konku-Asase, Abu Yaya, Kwabena Kan-Dapaah and Stefano Bellucci

Advances in Materials Science and Engineering, 2020, 2020
DOI: 10.1155/2020/6562373

Polymer Coatings in 3D-Printed Fluidic Device Channels for Improved Cellular Adherence Prior to Electrical Lysis

Bethany C. Gross, Kari B. Anderson, Jayda E. Meisel, Megan I. McNitt and Dana M. Spence

Anal. Chem., 2015, 87, 6335
DOI: 10.1021/acs.analchem.5b01202

Porous Structural Microfluidic Device for Biomedical Diagnosis: A Review

Luyao Chen, Xin Guo, Xidi Sun, Shuming Zhang, Jing Wu, Huiwen Yu, Tongju Zhang, Wen Cheng, Yi Shi and Lijia Pan

Micromachines, 2023, 14, 547
DOI: 10.3390/mi14030547

PiFlow: A biocompatible low-cost programmable dynamic flow pumping system utilizing a Raspberry Pi Zero and commercial piezoelectric pumps

Timothy Kassis, Paola M. Perez, Chloe J.W. Yang, Luis R. Soenksen, David L. Trumper and Linda G. Griffith

HardwareX, 2018, 4, e00034
DOI: 10.1016/j.ohx.2018.e00034

“Learning on a chip:” Microfluidics for formal and informal science education

Darius G. Rackus, Ingmar H. Riedel-Kruse and Nicole Pamme

Biomicrofluidics, 2019, 13
DOI: 10.1063/1.5096030

Microfluidic Chips for Life Sciences—A Comparison of Low Entry Manufacturing Technologies

Maximilian Grösche, Ahmed E. Zoheir, Johannes Stegmaier, Ralf Mikut, Dario Mager, Jan G. Korvink, Kersten S. Rabe and Christof M. Niemeyer

Small, 2019, 15
DOI: 10.1002/smll.201901956

3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding

Thomas J. Hinton, Andrew Hudson, Kira Pusch, Andrew Lee and Adam W. Feinberg

ACS Biomater. Sci. Eng., 2016, 2, 1781
DOI: 10.1021/acsbiomaterials.6b00170

A new method for polydimethylsiloxane (PDMS) microfluidic chips to maintain vacuum-driven power using Parylene C

Qi Song, Jingjing Sun, Ying Mu, Yanan Xu, Qiangyuan Zhu and Qinhan Jin

Sensors and Actuators B: Chemical, 2018, 256, 1122
DOI: 10.1016/j.snb.2017.10.006

A combination of 3D printing and PCB technologies in microfluidic sensing device fabrication

Hang Tran Thanh, Tuan Vu Quoc, Phu Nguyen Van, Loc Do Quang, An Nguyen Ngoc, Chi Tran Nhu, Nam Nguyen Hoang, Ngoc Thanh Le, Tran Thuy Nguyen, Tung Thanh Bui and Trinh Chu Duc

Microsyst Technol, 2022, 28, 1607
DOI: 10.1007/s00542-022-05284-x

Simple and low-cost production of hybrid 3D-printed microfluidic devices

Lynh Huyen Duong and Pin-Chuan Chen

Biomicrofluidics, 2019, 13
DOI: 10.1063/1.5092529

3D-printed stretchable hybrid piezoelectric-triboelectric nanogenerator for smart tire: Onboard real-time tread wear monitoring system

Kamal Kumar Meena, Injamamul Arief, Anik Kumar Ghosh, Hans Liebscher, Sakrit Hait, Jürgen Nagel, Gert Heinrich, Andreas Fery and Amit Das

Nano Energy, 2023, 115, 108707
DOI: 10.1016/j.nanoen.2023.108707

Three-dimensional printing-based electro-millifluidic devices for fabricating multi-compartment particles

Qiu Lan Chen, Zhou Liu and Ho Cheung Shum

Biomicrofluidics, 2014, 8
DOI: 10.1063/1.4902929

The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions

Anthony Tony, Ildiko Badea, Chun Yang, Yuyi Liu, Garth Wells, Kemin Wang, Ruixue Yin, Hongbo Zhang and Wenjun Zhang

Polymers, 2023, 15, 1926
DOI: 10.3390/polym15081926

Fabrication method for structured porous polydimethylsiloxane (PDMS)

Qi Li, Tiantian Duan, Jian Shao and Hongbin Yu

J Mater Sci, 2018, 53, 11873
DOI: 10.1007/s10853-018-2396-z

Photocurable chemically-amplified positive-tone ultraviolet resist for multi lithography process

Takao Okabe and Jun Taniguchi

Appl. Phys. Express, 2019, 12, 126502
DOI: 10.7567/1882-0786/ab4f4c

3D-printed bioanalytical devices

Gregory W Bishop, Jennifer E Satterwhite-Warden, Karteek Kadimisetty and James F Rusling

Nanotechnology, 2016, 27, 284002
DOI: 10.1088/0957-4484/27/28/284002

Rapid prototyping of a retinal multivascular network phantom for optical retinal vascular imaging equipment evaluation

Xiaowei Zhao, Wenli Liu, Zhixiong Hu, Liangcheng Duan, Xiao Zhang, Fei Li and Baoyu Hong

Biomed. Opt. Express, 2024, 15, 4253
DOI: 10.1364/BOE.523115

3D printing for ultra-precision machining: current status, opportunities, and future perspectives

Tao He, Wai Sze Yip, Edward Hengzhou Yan, Jiuxing Tang, Muhammad Rehan, Long Teng, Chi Ho Wong, Linhe Sun, Baolong Zhang, Feng Guo, Shaohe Zhang and Suet To

Front. Mech. Eng., 2024, 19
DOI: 10.1007/s11465-024-0792-4

Construction of programmable interconnected 3D microfluidic networks

Patrick R Hunziker, Marc P Wolf, Xueya Wang, Bei Zhang, Stephan Marsch and Georgette B Salieb-Beugelaar

J. Micromech. Microeng., 2015, 25, 025018
DOI: 10.1088/0960-1317/25/2/025018

Additive manufacturing of silicone for biomedical applications

Deon Johan de Beer, Thywill Cephas Dzogbewu and Jacobus van der Walt

Biomedical Engineering Advances, 2025, 9, 100158
DOI: 10.1016/j.bea.2025.100158

Tailored Sample Mounting for Light-Sheet Fluorescence Microscopy of Clarified Specimens by Polydimethylsiloxane Casting

Antonino Paolo Di Giovanna, Caterina Credi, Alessandra Franceschini, Marie Caroline Müllenbroich, Ludovico Silvestri and Francesco Saverio Pavone

Front. Neuroanat., 2019, 13
DOI: 10.3389/fnana.2019.00035

3D printing of silicone and polyurethane elastomers for medical device application: A review

Myka Mae Duran, Gafaru Moro, Yang Zhang and Aminul Islam

Advances in Industrial and Manufacturing Engineering, 2023, 7, 100125
DOI: 10.1016/j.aime.2023.100125

Overview and Future Perspectives of Microfluidic Digital Recombinase Polymerase Amplification (dRPA)

Ning Zhang, Chao Li, Xuechen Dou, Yaohua Du and Feng Tian

Critical Reviews in Analytical Chemistry, 2022, 52, 1969
DOI: 10.1080/10408347.2022.2042669

Stable versus Temporally Sensitive Optical Security Tags from Metal Nanoparticles

Maha Ibrar, Megan Knobeloch, Nayana Christudas Beena, Yaroslav Losovyj, Sheng-Yuan Huang, Claire McCurtain, David J. Crandall, Stephen C. Jacobson and Sara E. Skrabalak

Nano Lett., 2025, 25, 4781
DOI: 10.1021/acs.nanolett.4c06199

Facile Photo and Thermal Two‐Stage Curing for High‐Performance 3D Printing of Poly(Dimethylsiloxane)

Zhongying Ji, Dong Jiang, Xiaoqin Zhang, Yuxiong Guo and Xiaolong Wang

Macromol. Rapid Commun., 2020, 41
DOI: 10.1002/marc.202000064

Surface Deformation of Biocompatible Materials: Recent Advances in Biological Applications

Sunhee Yoon, Ahmed Fuwad, Seorin Jeong, Hyeran Cho, Tae-Joon Jeon and Sun Min Kim

Biomimetics, 2024, 9, 395
DOI: 10.3390/biomimetics9070395

3D Printed Unibody Lab-on-a-Chip: Features Survey and Check-Valves Integration

Germán Comina, Anke Suska and Daniel Filippini

Micromachines, 2015, 6, 437
DOI: 10.3390/mi6040437

Fabrication routes via projection stereolithography for 3D-printing of microfluidic geometries for nucleic acid amplification

Charalampos Tzivelekis, Pavlos Sgardelis, Kevin Waldron, Richard Whalley, Dehong Huo, Kenny Dalgarno and Andreas Offenhausser

PLoS ONE, 2020, 15, e0240237
DOI: 10.1371/journal.pone.0240237

Stereoselective Catalytic Synthesis of Active Pharmaceutical Ingredients in Homemade 3D‐Printed Mesoreactors

Sergio Rossi, Riccardo Porta, Davide Brenna, Alessandra Puglisi and Maurizio Benaglia

Angewandte Chemie, 2017, 129, 4354
DOI: 10.1002/ange.201612192

Hydrophobic Recovery of PDMS Surfaces in Contact with Hydrophilic Entities: Relevance to Biomedical Devices

Tomoo Tsuzuki, Karine Baassiri, Zahra Mahmoudi, Ayyappasamy Sudalaiyadum Perumal, Kavya Rajendran, Gala Montiel Rubies and Dan V. Nicolau

Materials, 2022, 15, 2313
DOI: 10.3390/ma15062313

A Review on 3D-Printed Miniaturized Devices for Point-of-Care-Testing Applications

Amol S. Kulkarni, Sarika Khandelwal, Yogesh Thakre, Jyoti Rangole, Madhusudan B. Kulkarni and Manish Bhaiyya

Biosensors, 2025, 15, 340
DOI: 10.3390/bios15060340

Continuous flow production of size-controllable niosomes using a thermostatic microreactor

Pablo García-Manrique, Gemma Gutiérrez, María Matos, Andrea Cristaldi, Ali Mosayyebi, Dario Carugo, Xunli Zhang and María Carmen Blanco-López

Colloids and Surfaces B: Biointerfaces, 2019, 182, 110378
DOI: 10.1016/j.colsurfb.2019.110378

A Versatile Flexible Polymer Actuator System for Pumps, Valves, and Injectors Enabling Fully Disposable Active Microfluidics

Yong Zhong, Daniel Filippini and Edwin W. H. Jager

Adv Materials Technologies, 2021, 6
DOI: 10.1002/admt.202000769

Direct sound printing

Mohsen Habibi, Shervin Foroughi, Vahid Karamzadeh and Muthukumaran Packirisamy

Nat Commun, 2022, 13
DOI: 10.1038/s41467-022-29395-1

Programmable optical window bonding enabled 3D printing of high‐resolution transparent microfluidic devices for biomedical applications

Mengguang Ye, Yuxiang Xue, Hongyu Zhao, Patricia Hazelton, Yuxuan Ji, Glen McHale and Xianfeng Chen

Droplet, 2025, 4
DOI: 10.1002/dro2.153

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

Yong He, Yan Wu, Jian‐zhong Fu, Qing Gao and Jing‐jiang Qiu

Electroanalysis, 2016, 28, 1658
DOI: 10.1002/elan.201600043

A modular brain-on-a-chip for modelling epileptic seizures with functionally connected human neuronal networks

Anssi Pelkonen, Ropafadzo Mzezewa, Lassi Sukki, Tomi Ryynänen, Joose Kreutzer, Tanja Hyvärinen, Andrey Vinogradov, Laura Aarnos, Jukka Lekkala, Pasi Kallio and Susanna Narkilahti

Biosensors and Bioelectronics, 2020, 168, 112553
DOI: 10.1016/j.bios.2020.112553

Engineering of Removing Sacrificial Materials in 3D-Printed Microfluidics

Pengju Yin, Bo Hu, Langlang Yi, Chun Xiao, Xu Cao, Lei Zhao and Hongyan Shi

Micromachines, 2018, 9, 327
DOI: 10.3390/mi9070327

3D printed microfluidics for cell biological applications

Liang Zhao and Xiayan Wang

TrAC Trends in Analytical Chemistry, 2023, 158, 116864
DOI: 10.1016/j.trac.2022.116864

Evaluation of 3D-printed molds for fabrication of non-planar microchannels

Pravien Parthiban, Sindhu Vijayan, Patrick S. Doyle and Michinao Hashimoto

Biomicrofluidics, 2021, 15
DOI: 10.1063/5.0047497

A Guiding Framework for Microextrusion Additive Manufacturing

Edidiong Nseowo Udofia and Wenchao Zhou

Journal of Manufacturing Science and Engineering, 2019, 141
DOI: 10.1115/1.4042607

Detection of Hepatocellular carcinoma in clinical specimens using Dielectrophoresis based ElectroKinetic Platform

Reda Abdelbaset, Marwan Abo-Elela, Yehya H. Ghallab, Hamdy Abdelhamid, Sameh S. Ali, Marwa M. Sayed, Sherif M. Shawky and Yehea Ismail

Sensors and Actuators A: Physical, 2020, 316, 112402
DOI: 10.1016/j.sna.2020.112402

Towards autonomous lab-on-a-chip devices for cell phone biosensing

Germán Comina, Anke Suska and Daniel Filippini

Biosensors and Bioelectronics, 2016, 77, 1153
DOI: 10.1016/j.bios.2015.10.092

The recent development and applications of fluidic channels by 3D printing

Yufeng Zhou

J Biomed Sci, 2017, 24
DOI: 10.1186/s12929-017-0384-2

A visible light-curable yet visible wavelength-transparent resin for stereolithography 3D printing

Hong Key Park, Mikyung Shin, Bongkyun Kim, Jin Woo Park and Haeshin Lee

NPG Asia Mater, 2018, 10, 82
DOI: 10.1038/s41427-018-0021-x

Innovative catalyst integration on transparent silicone microreactors for photocatalytic applications

Ismael Pellejero, Alberto Clemente, Santiago Reinoso, Alfonso Cornejo, Alberto Navajas, José J. Vesperinas, Miguel A. Urbiztondo and Luis M. Gandía

Catalysis Today, 2022, 383, 164
DOI: 10.1016/j.cattod.2020.05.058

Three-dimensional printed knotted reactors enabling highly sensitive differentiation of silver nanoparticles and ions in aqueous environmental samples

Cheng-Kuan Su, Meng-Hsuan Hsieh and Yuh-Chang Sun

Analytica Chimica Acta, 2016, 914, 110
DOI: 10.1016/j.aca.2016.01.057

Evaluation of Lateral and Vertical Dimensions of Micromolds Fabricated by a PolyJet™ Printer

Sindhu Vijayan, Pravien Parthiban and Michinao Hashimoto

Micromachines, 2021, 12, 302
DOI: 10.3390/mi12030302

Augmented 3D Printing for Multiscale Microphysiological Systems

Kyeong Seob Hwang, Jiyoung Song, Hyun Wook Kang, Jongbaeg Kim, Cheol Woo Ha, Nakwon Choi, Seokyoung Bang and Hong Nam Kim

Small, 2025, 21
DOI: 10.1002/smll.202504750

Recent developments in scale-up of microfluidic emulsion generation via parallelization

Heon-Ho Jeong, David Issadore and Daeyeon Lee

Korean J. Chem. Eng., 2016, 33, 1757
DOI: 10.1007/s11814-016-0041-6

Recent advances and challenges of biosensing in point-of-care molecular diagnosis

Hongwei Chu, Conghui Liu, Jinsen Liu, Jiao Yang, Yingchun Li and Xueji Zhang

Sensors and Actuators B: Chemical, 2021, 348, 130708
DOI: 10.1016/j.snb.2021.130708

Silicon‐Based Integrated Label‐Free Optofluidic Biosensors: Latest Advances and Roadmap

Jiawei Wang, Mariana Medina Sanchez, Yin Yin, Raffael Herzer, Libo Ma and Oliver G. Schmidt

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.201901138

Chemical and biochemical analysis on lab-on-a-chip devices fabricated using three-dimensional printing

Yan Zhang, Shenguang Ge and Jinghua Yu

TrAC Trends in Analytical Chemistry, 2016, 85, 166
DOI: 10.1016/j.trac.2016.09.008

Miniaturization of Instrumental Planar Chromatography with Focus on Mass Spectrometry

Tim T. Häbe and Gertrud E. Morlock

Chromatographia, 2016, 79, 797
DOI: 10.1007/s10337-016-3113-1

3D-printed microfluidic devices

Reza Amin, Stephanie Knowlton, Alexander Hart, Bekir Yenilmez, Fariba Ghaderinezhad, Sara Katebifar, Michael Messina, Ali Khademhosseini and Savas Tasoglu

Biofabrication, 2016, 8, 022001
DOI: 10.1088/1758-5090/8/2/022001

An experimental approach to manufacturability assessment of microfluidic devices produced by stereolithography

Mattia Mele and Giampaolo Campana

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2020, 234, 4905
DOI: 10.1177/0954406220932203

Microfluidic Packaging Integration with Electronic-Photonic Biosensors Using 3D Printed Transfer Molding

Christos Adamopoulos, Asmaysinh Gharia, Ali Niknejad, Vladimir Stojanović and Mekhail Anwar

Biosensors, 2020, 10, 177
DOI: 10.3390/bios10110177

Fabrication of PDMS Nanocomposite Materials and Nanostructures for Biomedical Nanosystems

Lee-Woon Jang, Joohyung Lee, Md Enayet Razu, Erik C. Jensen and Jungkyu Kim

IEEE Trans.on Nanobioscience, 2015, 14, 841
DOI: 10.1109/TNB.2015.2509602

Nanobiotechnological approaches for breast cancer Management: Drug delivery systems and 3D In-Vitro models

Hossein Abolhassani, Alireza Eskandari, Anita Saremi Poor, Ali Zarrabi, Behnoosh Khodadadi, Sara Karimifard, Hamidreza Sahrayi, Mahsa Bourbour and Mohammad Tavakkoli Yaraki

Coordination Chemistry Reviews, 2024, 508, 215754
DOI: 10.1016/j.ccr.2024.215754

Rapid and cost-effective fabrication of microfluidic chips with resin 3D printing

Piero G. Latorre-Quevedo, Brenda A. Cárdenas-Infantes, Dona Chancan-Aviles, Alen Zimic-Sheen, Katherine A. Jamanca-Abalos, Melany Cama, Suyeon Kim, Patricia Sheen and Mirko Zimic

Prog Addit Manuf, 2026, 11, 961
DOI: 10.1007/s40964-025-01391-z

Recent Developments in 3D Printing of Droplet-Based Microfluidics

Adedamola D. Aladese and Heon-Ho Jeong

BioChip J, 2021, 15, 313
DOI: 10.1007/s13206-021-00032-1

Fluidics in Microwave Components

Kamran Entesari and Alireza Pourghorban Saghati

IEEE Microwave, 2016, 17, 50
DOI: 10.1109/MMM.2016.2538513

Rapid Heavy Metals Detection Using LIBS with Concentration Gradient Generators

Xinrui Pan, Yuanchao Liu, Weiliang Wang, Furong Zhang, Xiujuan Hu, Shaofei Shen and Lianbo Guo

Anal. Chem., 2025, 97, 16403
DOI: 10.1021/acs.analchem.5c02125

Development of a high‐precision viscous chocolate printer utilizing electrostatic inkjet printing

Yuya Suzuki, Kensuke Takagishi and Shinjiro Umezu

J Food Process Engineering, 2019, 42
DOI: 10.1111/jfpe.12934

Integrated lab-on-a-chip devices: Fabrication methodologies, transduction system for sensing purposes

Daphika S. Dkhar, Rohini Kumari, Shweta J. Malode, Nagaraj P. Shetti and Pranjal Chandra

Journal of Pharmaceutical and Biomedical Analysis, 2023, 223, 115120
DOI: 10.1016/j.jpba.2022.115120

3D Printed Microfluidics

Anna V. Nielsen, Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Annual Rev. Anal. Chem., 2020, 13, 45
DOI: 10.1146/annurev-anchem-091619-102649

High-Throughput Generation of Emulsions and Microgels in Parallelized Microfluidic Drop-Makers Prepared by Rapid Prototyping

Tim Femmer, Alexander Jans, Rudi Eswein, Naveed Anwar, Martin Moeller, Matthias Wessling and Alexander J.C. Kuehne

ACS Appl. Mater. Interfaces, 2015, 7, 12635
DOI: 10.1021/acsami.5b03969

Study of the behavior of Euglena viridis, Euglena gracilis and Lepadella patella cultured in all-glass microaquarium

Agnieszka Podwin, Wojciech Kubicki and Jan A. Dziuban

Biomed Microdevices, 2017, 19
DOI: 10.1007/s10544-017-0205-0

Carbon-Coated Nickel Nanoparticles: Effect on the Magnetic and Electric Properties of Composite Materials

Artyom Plyushch, Jan Macutkevič, Jūras Banys, Polina Kuzhir, Nikolay Kalanda, Alexander Petrov, Clara Silvestre, Mikhail A. Uimin, Anatoly Ye. Yermakov and Olga Shenderova

Coatings, 2018, 8, 165
DOI: 10.3390/coatings8050165

Facile and cost-effective production of microscale PDMS architectures using a combined micromilling-replica moulding (μMi-REM) technique

Dario Carugo, Jeong Yu Lee, Anne Pora, Richard J. Browning, Lorenzo Capretto, Claudio Nastruzzi and Eleanor Stride

Biomed Microdevices, 2016, 18
DOI: 10.1007/s10544-015-0027-x

MineLoC: A Rapid Production of Lab-on-a-Chip Biosensors Using 3D Printer and the Sandbox Game, Minecraft

Kyukwang Kim, Hyeongkeun Kim, Seunggyu Kim and Jessie S. Jeon

Sensors, 2018, 18, 1896
DOI: 10.3390/s18061896

Rapid Production of PDMS Microdevices for Electrodriven Separations and Microfluidics by 3D-Printed Scaffold Removal

Alena Šustková, Klára Konderlová, Ester Drastíková, Stefan Sützl, Lenka Hárendarčíková and Jan Petr

Separations, 2021, 8, 67
DOI: 10.3390/separations8050067

Inkjet 3D printed chip for capillary gel electrophoresis

Rafał Walczak, Krzysztof Adamski and Wojciech Kubicki

Sensors and Actuators B: Chemical, 2018, 261, 474
DOI: 10.1016/j.snb.2018.01.174

Additive manufacturing of functional devices for environmental applications: A review

Ana Paula Fagundes, Jéssica Oliveira de Brito Lira, Natan Padoin, Cíntia Soares and Humberto Gracher Riella

Journal of Environmental Chemical Engineering, 2022, 10, 108049
DOI: 10.1016/j.jece.2022.108049

3D‐Printed Microfluidic Devices for Materials Science

Moien Alizadehgiashi, Albert Gevorkian, Moritz Tebbe, Minseok Seo, Elisabeth Prince and Eugenia Kumacheva

Adv Materials Technologies, 2018, 3
DOI: 10.1002/admt.201800068

Evaluation of a targeted drug delivery system on breast tumor spheroids on a chip

Hossein Abolhassani, Mohammad Zaer, Seyed Abbas Shojaosadati and Sameereh Hashemi-Najafabadi

Journal of Drug Delivery Science and Technology, 2024, 92, 105346
DOI: 10.1016/j.jddst.2024.105346

Bio-functionalized silk hydrogel microfluidic systems

Siwei Zhao, Ying Chen, Benjamin P. Partlow, Anne S. Golding, Peter Tseng, Jeannine Coburn, Matthew B. Applegate, Jodie E. Moreau, Fiorenzo G. Omenetto and David L. Kaplan

Biomaterials, 2016, 93, 60
DOI: 10.1016/j.biomaterials.2016.03.041

Fabrication and characterization of a magnetic micro-actuator based on deformable Fe-doped PDMS artificial cilium using 3D printing

Fengli Liu, Gursel Alici, Binbin Zhang, Stephen Beirne and Weihua Li

Smart Mater. Struct., 2015, 24, 035015
DOI: 10.1088/0964-1726/24/3/035015

Embedding objects during 3D printing to add new functionalities

Po Ki Yuen

Biomicrofluidics, 2016, 10
DOI: 10.1063/1.4958909

3D printed reactor-in-a-centrifuge (RIAC): Making flow-synthesis of nanoparticles pump-free and cost-effective

Domenico Andrea Cristaldi, Alessio Labanca, Tomas Donal Pottinger, Joshua Owen, Eugen Stulz, Xunli Zhang and Dario Carugo

Chemical Engineering Journal, 2021, 425, 130656
DOI: 10.1016/j.cej.2021.130656

3D printed microfluidic devices for nanoparticle fabrication: a review

Yasser Aldaghestani, Rami Homsi, Anas Alazzam and Andreas Schiffer

Prog Addit Manuf, 2025, 10, 7291
DOI: 10.1007/s40964-025-01140-2

Three-Dimensional Printing of Acrylonitrile Butadiene Styrene Microreactors for Photocatalytic Applications

Aarón Cabrera, Ismael Pellejero, Tamara Oroz-Mateo, Cristina Salazar, Alberto Navajas, Claudio Fernández-Acevedo and Luis M. Gandía

Ind. Eng. Chem. Res., 2020, 59, 20686
DOI: 10.1021/acs.iecr.0c04349

Drop-on-demand printed microfluidics device with sensing electrodes using silver and PDMS reactive inks

Avinash Mamidanna, Christopher Lefky and Owen Hildreth

Microfluid Nanofluid, 2017, 21
DOI: 10.1007/s10404-017-2010-8

Polydiacetylene (PDA) Embedded Polymer-Based Network Structure for Biosensor Applications

Huisoo Jang, Junhyeon Jeon, Mingyeong Shin, Geonha Kang, Hyunil Ryu, Sun Min Kim and Tae-Joon Jeon

Gels, 2025, 11, 66
DOI: 10.3390/gels11010066

Three-dimensional printed sample load/inject valves enabling online monitoring of extracellular calcium and zinc ions in living rat brains

Cheng-Kuan Su, Sheng-Chieh Hsia and Yuh-Chang Sun

Analytica Chimica Acta, 2014, 838, 58
DOI: 10.1016/j.aca.2014.06.037

Rapid prototyping of single-layer microfluidic PDMS devices with abrupt depth variations under non-clean-room conditions by using laser ablation and UV-curable polymer

Zhibin Yan, Xiaoyang Huang and Chun Yang

Microfluid Nanofluid, 2017, 21
DOI: 10.1007/s10404-017-1943-2

FDM filaments with unique segmentation since evolution: a critical review

R. Anandkumar and S. Ramesh Babu

Prog Addit Manuf, 2019, 4, 185
DOI: 10.1007/s40964-018-0069-8

Rapid Customization of 3D Integrated Microfluidic Chips via Modular Structure-Based Design

Jingjiang Qiu, Qing Gao, Haiming Zhao, Jianzhong Fu and Yong He

ACS Biomater. Sci. Eng., 2017, 3, 2606
DOI: 10.1021/acsbiomaterials.7b00401

3D micro/nano fabrication and its application in cancer biophysics

Lu Jin-Lei, Wang Xiao-Chen, Rong Xiao-Hui and Liu Li-Yu

Acta Phys. Sin., 2015, 64, 058705
DOI: 10.7498/aps.64.058705

Vat polymerization-based bioprinting—process, materials, applications and regulatory challenges

Wei Long Ng, Jia Min Lee, Miaomiao Zhou, Yi-Wen Chen, Kai-Xing Alvin Lee, Wai Yee Yeong and Yu-Fang Shen

Biofabrication, 2020, 12, 022001
DOI: 10.1088/1758-5090/ab6034

3D Microporous Scaffolds Manufactured via Combination of Fused Filament Fabrication and Direct Laser Writing Ablation

Mangirdas Malinauskas, Sima Rekštytė, Laurynas Lukoševičius, Simas Butkus, Evaldas Balčiūnas, Milda Pečiukaitytė, Daiva Baltriukienė, Virginija Bukelskienė, Arūnas Butkevičius, Povilas Kucevičius, Vygandas Rutkūnas and Saulius Juodkazis

Micromachines, 2014, 5, 839
DOI: 10.3390/mi5040839

A 3D-Printed Oxygen Control Insert for a 24-Well Plate

Martin D. Brennan, Megan L. Rexius-Hall, David T. Eddington and Arum Han

PLoS ONE, 2015, 10, e0137631
DOI: 10.1371/journal.pone.0137631

Photogrammetric measurements of 3D printed microfluidic devices

M.G. Guerra, C. Volpone, L.M. Galantucci and G. Percoco

Additive Manufacturing, 2018, 21, 53
DOI: 10.1016/j.addma.2018.02.013

Reconfigurable Microfluidic Magnetic Valve Arrays: Towards a Radiotherapy-Compatible Spheroid Culture Platform for the Combinatorial Screening of Cancer Therapies

Alexandre Brunet, Frédérique Labelle, Philip Wong and Thomas Gervais

Sensors, 2017, 17, 2271
DOI: 10.3390/s17102271

Stereoselective Catalytic Synthesis of Active Pharmaceutical Ingredients in Homemade 3D‐Printed Mesoreactors

Sergio Rossi, Riccardo Porta, Davide Brenna, Alessandra Puglisi and Maurizio Benaglia

Angew Chem Int Ed, 2017, 56, 4290
DOI: 10.1002/anie.201612192

Fabricating plasma bonded microfluidic chips by CO2 laser machining of PDMS by the application of viscoelastic particle focusing and droplet generation

M. Tahsin Guler

Journal of Manufacturing Processes, 2022, 73, 260
DOI: 10.1016/j.jmapro.2021.11.016

In situ, dual-mode monitoring of organ-on-a-chip with smartphone-based fluorescence microscope

Soohee Cho, Argel Islas-Robles, Ariana M. Nicolini, Terrence J. Monks and Jeong-Yeol Yoon

Biosensors and Bioelectronics, 2016, 86, 697
DOI: 10.1016/j.bios.2016.07.015

Hydrogel-Assisted Double Molding Enables Rapid Replication of Stereolithographic 3D Prints for Engineered Tissue Design

Daniel W. Simmons, David R. Schuftan, Ghiska Ramahdita and Nathaniel Huebsch

ACS Appl. Mater. Interfaces, 2023, 15, 25313
DOI: 10.1021/acsami.3c02279

Editors’ Choice—Challenges and Opportunities for Developing Electrochemical Biosensors with Commercialization Potential in the Point-of-Care Diagnostics Market

Amir Ali Akhlaghi, Harmanjit Kaur, Bal Ram Adhikari and Leyla Soleymani

ECS Sens. Plus, 2024, 3, 011601
DOI: 10.1149/2754-2726/ad304a

A simple and accessible approach for processing photopolymer master molds for the fabrication of microfluidic polydimethylsiloxane devices

A. Otroshchenko and M. V. Zyuzin

Physics of Fluids, 2022, 34
DOI: 10.1063/5.0122055

Rapid assembly of multilayer microfluidic structures via 3D-printed transfer molding and bonding

Casey C. Glick, Mitchell T. Srimongkol, Aaron J. Schwartz, William S. Zhuang, Joseph C. Lin, Roseanne H. Warren, Dennis R. Tekell, Panitan A. Satamalee and Liwei Lin

Microsyst Nanoeng, 2016, 2
DOI: 10.1038/micronano.2016.63

Polymer Material Design by Microfluidics Inspired by Cell Biology and Cell‐Free Biotechnology

Julian Thiele

Macro Chemistry & Physics, 2017, 218
DOI: 10.1002/macp.201600429

Biosensing with cell phones

Pakorn Preechaburana, Anke Suska and Daniel Filippini

Trends in Biotechnology, 2014, 32, 351
DOI: 10.1016/j.tibtech.2014.03.007

Fused Deposition Modeling 3D Printing for (Bio)analytical Device Fabrication: Procedures, Materials, and Applications

Gert IJ. Salentijn, Pieter E. Oomen, Maciej Grajewski and Elisabeth Verpoorte

Anal. Chem., 2017, 89, 7053
DOI: 10.1021/acs.analchem.7b00828

Molecular diffusion analysis of dynamic blood flow and plasma separation driven by self-powered microfluidic devices

Sung Oh Woo, Myungkeun Oh, Kyle Nietfeld, Bailey Boehler and Yongki Choi

Biomicrofluidics, 2021, 15
DOI: 10.1063/5.0051361

A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components

Ehsan Azarsa, Morteza Jeyhani, Amro Ibrahim, Scott S. H. Tsai and Marcello Papini

Biomicrofluidics, 2020, 14
DOI: 10.1063/5.0009443

3D Printing of PDMS Improves Its Mechanical and Cell Adhesion Properties

Veli Ozbolat, Madhuri Dey, Bugra Ayan, Adomas Povilianskas, Melik C. Demirel and Ibrahim T. Ozbolat

ACS Biomater. Sci. Eng., 2018, 4, 682
DOI: 10.1021/acsbiomaterials.7b00646

A Non-Sacrificial 3D Printing Process for Fabricating Integrated Micro/Mesoscale Molds

Amirreza Ghaznavi, Jie Xu and Seth A. Hara

Micromachines, 2023, 14, 1363
DOI: 10.3390/mi14071363

Validation of Easy Fabrication Methods for PDMS-Based Microfluidic (Bio)Reactors

Josef Vogt and Katrin Rosenthal

Sci, 2022, 4, 36
DOI: 10.3390/sci4040036

Autonomous Chemical Sensing Interface for Universal Cell Phone Readout

Germán Comina, Anke Suska and Daniel Filippini

Angewandte Chemie, 2015, 127, 8832
DOI: 10.1002/ange.201503727

Microarray Platforms Based on 3D Printing

Jinglin Qin, Zhenwei Qian, Yiwen Lai, Chen Zhang and Xiannian Zhang

Anal. Chem., 2024, 96, 6001
DOI: 10.1021/acs.analchem.4c00367

3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications

Alireza Ahmadian Yazdi, Adam Popma, William Wong, Tammy Nguyen, Yayue Pan and Jie Xu

Microfluid Nanofluid, 2016, 20
DOI: 10.1007/s10404-016-1715-4

Micromixer with Fine-Tuned Mathematical Spiral Structures

Binfeng Yin, Wenkai Yue, A. S. M. Muhtasim Fuad Sohan, Teng Zhou, Changcheng Qian and Xinhua Wan

ACS Omega, 2021, 6, 30779
DOI: 10.1021/acsomega.1c05024

3D printing: It’s microfluidic functions and environmental impacts

Abhishek Sharma, Surajit Mondal, Amit Kumar Mondal, Soumadeep Baksi, Ravi Kumar Patel, Won-Shik Chu and Jitendra K. Pandey

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2017, 4, 323
DOI: 10.1007/s40684-017-0038-6

Fully woven textile-based closed microfluidic system design

Quentin Watel, Aurélie Cayla, Vivian Aubert, Fabien Salaün, Jean-Louis Viovy and François Boussu

The Journal of The Textile Institute, 2025, 116, 1358
DOI: 10.1080/00405000.2024.2378219

A Review on Electromechanical Devices Fabricated by Additive Manufacturing

John O'Donnell, Myungsun Kim and Hwan-Sik Yoon

Journal of Manufacturing Science and Engineering, 2017, 139
DOI: 10.1115/1.4033758

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Megala Ramasamy, Brandon Ho, Chau-Minh Phan, Ning Qin, Carolyn L Ren and Lyndon Jones

J. Micromech. Microeng., 2023, 33, 105016
DOI: 10.1088/1361-6439/acf2a7

Facile microfabrication of 3-dimensional (3D) hydrophobic polymer surfaces using 3D printing technology

Beomchan Kang, Jini Hyeon and Hongyun So

Applied Surface Science, 2020, 499, 143733
DOI: 10.1016/j.apsusc.2019.143733

Wireless poly(dimethylsiloxane) quartz-crystal-microbalance biosensor chip fabricated by nanoimprint lithography for micropump integration aiming at application in lab-on-a-chip

Fumihito Kato, Hiroyuki Noguchi, Yukinari Kodaka, Naoya Oshida and Hirotsugu Ogi

Jpn. J. Appl. Phys., 2018, 57, 07LD14
DOI: 10.7567/JJAP.57.07LD14

A planar surface acoustic wave micropump for closed-loop microfluidics

R. Rimsa, A. J. Smith, C. Wälti and C. D. Wood

Applied Physics Letters, 2017, 111
DOI: 10.1063/1.5007701

Optical 3D printing: bridging the gaps in the mesoscale

Linas Jonušauskas, Saulius Juodkazis and Mangirdas Malinauskas

J. Opt., 2018, 20, 053001
DOI: 10.1088/2040-8986/aab3fe

Centrifugation-Assisted Three-Dimensional Printing of Devices Embedded with Fully Enclosed Microchannels

Chia-Heng Chu, Enerelt Burentugs, Dohwan Lee, Jacob M. Owens, Ruxiu Liu, Albert B. Frazier and A. Fatih Sarioglu

3D Printing and Additive Manufacturing, 2023, 10, 609
DOI: 10.1089/3dp.2021.0133

Easy-to-perform and cost-effective fabrication of continuous-flow reactors and their application for nanomaterials synthesis

Domenico Andrea Cristaldi, Fatih Yanar, Ali Mosayyebi, Pablo García-Manrique, Eugen Stulz, Dario Carugo and Xunli Zhang

New Biotechnology, 2018, 47, 1
DOI: 10.1016/j.nbt.2018.02.002

Redefining Quantum Dot Synthesis with Additive-Manufactured Microfluidics—A Review

Faisal bin Nasser Sarbaland, Masashi Kobayashi, Daiki Tanaka, Risa Fujita and Masahiro Furuya

J, 2025, 8, 18
DOI: 10.3390/j8020018

PDMS Curing Inhibition on 3D-Printed Molds: Why? Also, How to Avoid It?

Bastien Venzac, Shanliang Deng, Ziad Mahmoud, Aufried Lenferink, Aurélie Costa, Fabrice Bray, Cees Otto, Christian Rolando and Séverine Le Gac

Anal. Chem., 2021, 93, 7180
DOI: 10.1021/acs.analchem.0c04944

3D Sacrificial Microchannels by Scaffold Removal Process for Electrical Characterization of Electrolytes

Dong-Gyu Jeon, Mi Jung Lee, Jaeyeong Heo, Sang Yeon Lee, Yong Chool Boo and Sung-Wook Nam

Electron. Mater. Lett., 2023, 19, 342
DOI: 10.1007/s13391-022-00402-3

Semi-contact-writing of polymer molds for prototyping PDMS chips with low surface roughness, sharp edges and locally varying channel heights

Ludwig Gutzweiler, Fabian Stumpf, Laurent Tanguy, Guenter Roth, Peter Koltay, Roland Zengerle and Lutz Riegger

J. Micromech. Microeng., 2016, 26, 045018
DOI: 10.1088/0960-1317/26/4/045018

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

Ho Nam Chan, Yangfan Chen, Yiwei Shu, Yin Chen, Qian Tian and Hongkai Wu

Microfluid Nanofluid, 2015, 19, 9
DOI: 10.1007/s10404-014-1542-4

Office Chromatography: Precise printing of sample solutions on miniaturized thin-layer phases and utilization for scanning Direct Analysis in Real Time mass spectrometry

Tim T. Häbe and Gertrud E. Morlock

Journal of Chromatography A, 2015, 1413, 127
DOI: 10.1016/j.chroma.2015.08.003

Direct ink writing of programmable functional silicone‐based composites for 4D printing applications

Zhiyang Lyu, J. Justin Koh, Gwendolyn J. H. Lim, Danwei Zhang, Ting Xiong, Lei Zhang, Siqi Liu, Junfei Duan, Jun Ding, John Wang, Jinlan Wang, Yunfei Chen and Chaobin He

Interdisciplinary Materials, 2022, 1, 507
DOI: 10.1002/idm2.12027

Additive Manufacturing in Fluid Process Engineering

Tim Femmer, Ina Flack and Matthias Wessling

Chemie Ingenieur Technik, 2016, 88, 535
DOI: 10.1002/cite.201500086

Two-step fabrication of clear view SLA millifluidic device for long-term in-vitro cultures

Debasmita Saha, Rama Pandillapally, Vaibhav Dhyani, Kurre Sri Harsha, Sarpras Swain, Suhanya Duraiswamy and Lopamudra Giri

RPJ, 2025, 31, 316
DOI: 10.1108/RPJ-02-2024-0071

Rapid prototyping of thermoplastic microfluidic devices via SLA 3D printing

Harrison Khoo, William Shaen Allen, Netzahualcóyotl Arroyo-Currás and Soojung Claire Hur

Sci Rep, 2024, 14
DOI: 10.1038/s41598-024-68761-5

Recording Neural Activity in Unrestrained Animals with Three-Dimensional Tracking Two-Photon Microscopy

Doycho Karagyozov, Mirna Mihovilovic Skanata, Amanda Lesar and Marc Gershow

Cell Reports, 2018, 25, 1371
DOI: 10.1016/j.celrep.2018.10.013

Autonomous Chemical Sensing Interface for Universal Cell Phone Readout

Germán Comina, Anke Suska and Daniel Filippini

Angew Chem Int Ed, 2015, 54, 8708
DOI: 10.1002/anie.201503727

3D printed optics with nanometer scale surface roughness

Nina Vaidya and Olav Solgaard

Microsyst Nanoeng, 2018, 4
DOI: 10.1038/s41378-018-0015-4

Microfluidic opportunities in printed electrolyte-gated transistor biosensors

Kevin D. Dorfman, Demetra Z. Adrahtas, Mathew S. Thomas and C. Daniel Frisbie

Biomicrofluidics, 2020, 14
DOI: 10.1063/1.5131365

Fabrication of PDMS passive micromixer by lost-wax casting

Chunhui Chung, Yann-Jiun Chen, Pin-Chaun Chen and Chia-Yuan Chen

Int. J. Precis. Eng. Manuf., 2015, 16, 2033
DOI: 10.1007/s12541-015-0264-1

An Immobilized Enzyme Reactor for Spatiotemporal Control over Reaction Products

Jennifer Grant, Justin A. Modica, Juliet Roll, Paul Perkovich and Milan Mrksich

Small, 2018, 14
DOI: 10.1002/smll.201800923

Low‐cost microfluidics: materials and methods

Yiqiang Fan

Micro & Nano Letters, 2018, 13, 1367
DOI: 10.1049/mnl.2018.5169

Orientation of Liquid Crystalline Molecules on PDMS Surfaces and within PDMS Microfluidic Systems

Szymon Baczyński, Piotr Sobotka, Kasper Marchlewicz, Mateusz Słowikowski, Marcin Juchniewicz, Artur Dybko and Katarzyna A. Rutkowska

Applied Sciences, 2021, 11, 11593
DOI: 10.3390/app112411593

Combining stereolithography and replica molding: On the way to superhydrophobic polymeric devices for photovoltaics

Caterina Credi, Diego Pintossi, Claudia L. Bianchi, Marinella Levi, Gianmarco Griffini and Stefano Turri

Materials & Design, 2017, 133, 143
DOI: 10.1016/j.matdes.2017.07.068

3D printed fluidic valves for remote operation via external magnetic field

Seokbeom Kim, Jungchul Lee and Bumkyoo Choi

Int. J. Precis. Eng. Manuf., 2016, 17, 937
DOI: 10.1007/s12541-016-0114-9

Navigating the future: Microfluidics charting new routes in drug delivery

Mohammad Mohammadi, Syamand Ahmed Qadir, Aryan Mahmood Faraj, Osama Hamid Shareef, Hassan Mahmoodi, Fatemeh Mahmoudi and Sajad Moradi

International Journal of Pharmaceutics, 2024, 124142
DOI: 10.1016/j.ijpharm.2024.124142

3D microfluidics in PDMS: manufacturing with 3D molding

Tyler Richmond and Nathan Tompkins

Microfluid Nanofluid, 2021, 25
DOI: 10.1007/s10404-021-02478-z

Current and future trends of additive manufacturing for chemistry applications: a review

Oyekunle Azeez Alimi and Reinout Meijboom

J Mater Sci, 2021, 56, 16824
DOI: 10.1007/s10853-021-06362-7

Autonomous lab-on-a-chip generic architecture for disposables with integrated actuation

Anke Suska and Daniel Filippini

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-55111-z

3D-printed microelectronics for integrated circuitry and passive wireless sensors

Sung-Yueh Wu, Chen Yang, Wensyang Hsu and Liwei Lin

Microsyst Nanoeng, 2015, 1
DOI: 10.1038/micronano.2015.13

A practical guide to rapid-prototyping of PDMS-based microfluidic devices: A tutorial

Giorgio Gianini Morbioli, Nicholas Colby Speller and Amanda M. Stockton

Analytica Chimica Acta, 2020, 1135, 150
DOI: 10.1016/j.aca.2020.09.013

Fabrication of a Malaria-Ab ELISA Bioassay Platform with Utilization of Syringe-Based and 3D Printed Assay Automation

Christopher Lim, Yangchung Lee and Lawrence Kulinsky

Micromachines, 2018, 9, 502
DOI: 10.3390/mi9100502

Microfluidic chip fabrication and performance analysis of 3D printed material for use in microfluidic nucleic acid amplification applications

Charalampos Tzivelekis, Matthew P Selby, Albert Batet, Hojjat Madadi and Kenny Dalgarno

J. Micromech. Microeng., 2021, 31, 035005
DOI: 10.1088/1361-6439/abd9a9

Test Article for automation purposes

Ning Zhang, Chao Li, Xuechen Dou, Yaohua Du and Feng Tian

Critical Reviews in Analytical Chemistry, 2022, 53, 1969
DOI: 10.1080/10408347.2022.2042999

Selectively deposited MEMS-compatible DNTF/PDMS-EC based energetic film and its characterization

Songjin Liu, Chongwei An, Sheng Kong, Baoyun Ye, Chunyan Li, Zhanxiong Xie, Minjie Li, Bidong Wu and Jingyu Wang

Journal of Energetic Materials, 2022, 1
DOI: 10.1080/07370652.2022.2120570

A rapidly prototyped lung-on-a-chip model using 3D-printed molds

Jesus Shrestha, Maliheh Ghadiri, Melane Shanmugavel, Sajad Razavi Bazaz, Steven Vasilescu, Lin Ding and Majid Ebrahimi Warkiani

Organs-on-a-Chip, 2019, 1, 100001
DOI: 10.1016/j.ooc.2020.100001

Universal method for fabricating PDMS microfluidic device using SU8, 3D printing and soft lithography

Charmi Chande, Nida Riaz, Victoria Harbour, Hathija Noor, Monica Torralba, Yu-Hsuan Cheng, Zhenglong Li, Anh Tong, Roman Voronov and Sagnik Basuray

Technology, 2020, 08, 50
DOI: 10.1142/S2339547820500041

Hemagglutination Assay via Optical Density Characterization in 3D Microtrap Chips

Sung-Wook Nam, Dong-Gyu Jeon, Young-Ran Yoon, Gang Ho Lee, Yongmin Chang and Dong Il Won

Biosensors, 2023, 13, 733
DOI: 10.3390/bios13070733

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Evgeniy G. Gordeev and Valentine P. Ananikov

Russ. Chem. Rev., 2020, 89, 1507
DOI: 10.1070/RCR4980

PDMS-based dual-channel pneumatic micro-actuator

Tariq Rehman, Marwan Nafea, Ahmad Athif Faudzi, Tanveer Saleh and Mohamed Sultan Mohamed Ali

Smart Mater. Struct., 2019, 28, 115044
DOI: 10.1088/1361-665X/ab4ac1