Yichen Liu, Jack Yang, Yang Liu, Jian Zheng, Wen Lee, Junjie Shi, Jonathan Horlyck, Jiangzhou Xie, Yee Yan Tay, Thiam Teck Tan, Dehong Yu, Richard Mole, Garry McIntyre, Changyong Zhang, Cui Ying Toe, T. David Waite, Jason Scott, Yu Wang, Tom Wu, Shenghao Han and Sean Li

Energy Environ. Sci., 2020, 13, 5080
DOI: 10.1039/D0EE02550J

Preparation of polyvinylidene fluoride/expanded graphite composites with enhanced thermal conductivity via ball milling treatment

Sha Deng, Yanlin Zhu, Xiaodong Qi, Wenjing Yu, Feng Chen and Qiang Fu

RSC Adv., 2016, 6, 45578
DOI: 10.1039/C6RA09521F

Sulfamic acid promoted one-pot multicomponent reaction: a facile synthesis of 4-oxo-tetrahydroindoles under ball milling conditions

Trimurti L. Lambat, Ahmed A. Abdala, Sami Mahmood, Pankaj V. Ledade, Ratiram G. Chaudhary and Subhash Banerjee

RSC Adv., 2019, 9, 39735
DOI: 10.1039/C9RA08478A

Mechanochemistry: A force in disguise and conditional effects towards chemical reactions

Srikanth Mateti, Motilal Mathesh, Zhen Liu, Tao Tao, Thrinathreddy Ramireddy, Alexey M. Glushenkov, Wenrong Yang and Ying Ian Chen

Chem. Commun., 2021, 57, 1080
DOI: 10.1039/D0CC06581A

Mechanochemical methods for the preparation of intercalation compounds, from intercalation to the formation of layered double hydroxides

Soontaree (Grace) Intasa-ard, Kamonnart (Jaa) Imwiset, Sareeya Bureekaew and Makoto Ogawa

Dalton Trans., 2018, 47, 2896
DOI: 10.1039/C7DT03736H

Sustainable and rapid preparation of nanosized Fe/Ni-pentlandite particles by mechanochemistry

David Tetzlaff, Kevinjeorjios Pellumbi, Daniel M. Baier, Lucas Hoof, Harikumar Shastry Barkur, Mathias Smialkowski, Hatem M. A. Amin, Sven Grätz, Daniel Siegmund, Lars Borchardt and Ulf-Peter Apfel

Chem. Sci., 2020, 11, 12835
DOI: 10.1039/D0SC04525J

Quantitative determination of activation energies in mechanochemical reactions

Franziska Fischer, Klaus-Jürgen Wenzel, Klaus Rademann and Franziska Emmerling

Phys. Chem. Chem. Phys., 2016, 18, 23320
DOI: 10.1039/C6CP04280E

High aspect ratio galfenol flakes for high strain efficiency and sensing performance of magnetostrictive polymer composites

Andrew D. M. Charles, Andrew N. Rider, Sonya A. Brown and Chun-Hui Wang

J. Mater. Chem. C, 2022, 10, 16865
DOI: 10.1039/D2TC02572H

Surfactant assisted exfoliation of near infrared fluorescent silicate nanosheets

Bjoern Hill, Smitha Abraham, Anas Akhtar, Gabriele Selvaggio, Kristina Tschulik and Sebastian Kruss

RSC Adv., 2023, 13, 20916
DOI: 10.1039/D3RA04083F

Structure disorder of graphitic carbon nitride induced by liquid-assisted grinding for enhanced photocatalytic conversion

Xue Lu Wang, Wen Qi Fang, Shuang Yang, Pengfei Liu, Huijun Zhao and Hua Gui Yang

RSC Adv., 2014, 4, 10676
DOI: 10.1039/C3RA47824F

Towards medicinal mechanochemistry: evolution of milling from pharmaceutical solid form screening to the synthesis of active pharmaceutical ingredients (APIs)

Davin Tan, Leigh Loots and Tomislav Friščić

Chem. Commun., 2016, 52, 7760
DOI: 10.1039/C6CC02015A

Hydrolysis of woody biomass by a biomass-derived reusable heterogeneous catalyst

Hirokazu Kobayashi, Hiroyuki Kaiki, Abhijit Shrotri, Kota Techikawara and Atsushi Fukuoka

Chem. Sci., 2016, 7, 692
DOI: 10.1039/C5SC03377B

The manipulation of natural mineral chalcopyrite CuFeS2via mechanochemistry: properties and thermoelectric potential

Peter Baláž, Erika Dutková, Matej Baláž, Nina Daneu, Lenka Findoráková, Jiří Hejtmánek, Petr Levinský, Karel Knížek, Mária Bali Hudáková, Róbert Džunda, Radovan Bureš and Viktor Puchý

Phys. Chem. Chem. Phys., 2023, 25, 31125
DOI: 10.1039/D3CP01788E

When phosphoryl azide meets mechanochemistry: clean, rapid, and efficient synthesis of phosphoryl amides under B(C6F5)3 catalysis in a ball mill

Lin-Yu Jiao, Xin-Hua Peng, Ze-Lin Wang, Nan Jia and Zhuo Li

Catal. Sci. Technol., 2021, 11, 6659
DOI: 10.1039/D1CY01314A

Towards the sustainable synthesis of microporous and layered titanosilicates: mechanochemical pre-treatment reduces the water amount

Isabel C. M. S. Santos-Vieira, Zhi Lin and João Rocha

Green Chem., 2022, 24, 5088
DOI: 10.1039/D2GC00654E

Mechanical milling as a technology to produce structural and functional bio-nanocomposites

Giuliana Gorrasi and Andrea Sorrentino

Green Chem., 2015, 17, 2610
DOI: 10.1039/C5GC00029G

Mechanochemistry and cocrystallization of 3-iodoethynylbenzoic acid with nitrogen-containing heterocycles: concurrent halogen and hydrogen bonding

Patrick M. J. Szell, Julien Dragon, Scott Zablotny, Stephen R. Harrigan, Bulat Gabidullin and David L. Bryce

New J. Chem., 2018, 42, 10493
DOI: 10.1039/C8NJ00437D

Systematic investigation of the mechanocatalytic partial depolymerization of cellulose towards oligomeric glycans

Gregor Meyer, Dominique Lumpp, Anne-Kathrin Stulik, Dagmar Hoffmann and Marcus Rose

RSC Mechanochem., 2024, 1, 130
DOI: 10.1039/D3MR00005B

Introductory Lecture: Mechanochemistry, a versatile synthesis strategy for new materials

William Jones and Mark D. Eddleston

Faraday Discuss., 2014, 170, 9
DOI: 10.1039/C4FD00162A

One-pot two-step mechanochemical synthesis: ligand and complex preparation without isolating intermediates

Michael Ferguson, Nicola Giri, Xu Huang, David Apperley and Stuart L. James

Green Chem., 2014, 16, 1374
DOI: 10.1039/C3GC42141D

A kinetic study of mechanically activated atom exchange: the effect of milling frequency and ball mass

Maria Carta, Stipe Lukin, Francesco Delogu and Ivan Halasz

Phys. Chem. Chem. Phys., 2024, 26, 16438
DOI: 10.1039/D3CP06147G

Decoupling the Arrhenius equation via mechanochemistry

Joel M. Andersen and James Mack

Chem. Sci., 2017, 8, 5447
DOI: 10.1039/C7SC00538E

Parametric study on the production of the GAGG:Ce and LSO:Ce multicomponent oxide scintillator materials through use of a planetary ball mill

Kaitlyn A. McDonald, Matthew R. McDonald, Melissa N. Bailey and George K. Schweitzer

Dalton Trans., 2018, 47, 13190
DOI: 10.1039/C8DT00637G

Mechanochemical synthesis of aromatic ketones: pyrylium tetrafluoroborate mediated deaminative arylation of amides

Satenik Mkrtchyan, Oleksandr Shalimov, Michael G. Garcia, Jiří Zapletal and Viktor O. Iaroshenko

Chem. Sci., 2024, 15, 9155
DOI: 10.1039/D4SC00904E

The unique opportunities of mechanosynthesis in green and scalable fabrication of metal–organic frameworks

Farzaneh Afshariazar and Ali Morsali

J. Mater. Chem. A, 2022, 10, 15332
DOI: 10.1039/D2TA02699F

The effect of the ball to reactant ratio on mechanochemical reaction times studied by in situ PXRD

Hannes Kulla, Franziska Fischer, Sigrid Benemann, Klaus Rademann and Franziska Emmerling

CrystEngComm, 2017, 19, 3902
DOI: 10.1039/C7CE00502D

Metal–organic framework composites from a mechanochemical process

Wupeng Wang, Milton Chai, Muhammad Yazid Bin Zulkifli, Kaijie Xu, Yuelei Chen, Lianzhou Wang, Vicki Chen and Jingwei Hou

Mol. Syst. Des. Eng., 2023, 8, 560
DOI: 10.1039/D2ME00211F

Mechanochemical conversion of chrysotile asbestos tailing into struvite for full elements utilization as citric-acid soluble fertilizer

Yonghao Tan, Zhemin Zou, Jun Qu, Jie Ren, Chenjie Wu and Zhigao Xu

Journal of Cleaner Production, 2021, 283, 124637
DOI: 10.1016/j.jclepro.2020.124637

Study of the mechanochemical process to crystalline Cu 2 ZnSnS 4 powder

Anna Ritscher, Marc Schlosser, Arno Pfitzner and Martin Lerch

Materials Research Bulletin, 2016, 84, 162
DOI: 10.1016/j.materresbull.2016.08.006

Influence of milling parameters on the solid-gas synthesis of TiCxN1−x by mechanically induced self-sustaining reaction

E. Chicardi, F.J. Gotor, M.D. Alcalá and J.M. Córdoba

Powder Technology, 2017, 319, 12
DOI: 10.1016/j.powtec.2017.06.035

Influence of reaction parameters on the depolymerization of H 2 SO 4 -impregnated cellulose in planetary ball mills

Robert Schmidt, Sindy Fuhrmann, Lothar Wondraczek and Achim Stolle

Powder Technology, 2016, 288, 123
DOI: 10.1016/j.powtec.2015.11.002

A comprehensive kinetic model for mechanochemical destruction of persistent organic pollutants

Giovanni Cagnetta, Jun Huang, Bin Wang, Shubo Deng and Gang Yu

Chemical Engineering Journal, 2016, 291, 30
DOI: 10.1016/j.cej.2016.01.079

Under Pressure: Mechanochemical Effects on Structure and Ion Conduction in the Sodium-Ion Solid Electrolyte Na3PS4

Theodosios Famprikis, Ö. Ulaş Kudu, James A. Dawson, Pieremanuele Canepa, François Fauth, Emmanuelle Suard, Mohamed Zbiri, Damien Dambournet, Olaf J. Borkiewicz, Houssny Bouyanfif, Steffen P. Emge, Sorina Cretu, Jean-Noël Chotard, Clare P. Grey, Wolfgang G. Zeier, M. Saiful Islam and Christian Masquelier

J. Am. Chem. Soc., 2020, 142, 18422
DOI: 10.1021/jacs.0c06668

Analysis of the effect mechanism of wet grinding on the film properties of pea protein isolate based on its structure changes

Xinpeng Gao, Yangyong Dai, Jian Cao and Hanxue Hou

Innovative Food Science & Emerging Technologies, 2023, 89, 103474
DOI: 10.1016/j.ifset.2023.103474

Mechanoenzymatic Reactions Involving Polymeric Substrates or Products

Jane Arciszewski and Karine Auclair

ChemSusChem, 2022, 15
DOI: 10.1002/cssc.202102084

In situ and real-time monitoring of mechanochemical milling reactions using synchrotron X-ray diffraction

Ivan Halasz, Simon A J Kimber, Patrick J Beldon, Ana M Belenguer, Frank Adams, Veijo Honkimäki, Richard C Nightingale, Robert E Dinnebier and Tomislav Friščić

Nat Protoc, 2013, 8, 1718
DOI: 10.1038/nprot.2013.100

Synthesis and characterization of multilayer graphene oxide on yttria-zirconia ceramics for dental implant

Cheng Zhang, Zhaoliang Jiang, Li Zhao, Wenping Liu, Pengchao Si and Jing Lan

J. Mater. Res., 2020, 35, 2466
DOI: 10.1557/jmr.2020.199

From spent lithium-ion batteries to high performance sodium-ion batteries: a case study

Yu Lei, Jiakui Zhang, Xianghong Chen, Wenlu Min, Rui Wang, Ming Yan and Jiantie Xu

Materials Today Energy, 2022, 26, 100997
DOI: 10.1016/j.mtener.2022.100997

Suppression of iron oxidation problem into PVDF/PMMA composites with ceramic additives: SiO2 vs. TiO2

Sylwia Kozdra, Michiko Atsumi, Małgorzata Możdżonek, Agnieszka Grabias, Agnieszka Malinowska, Adrianna Rejmer and Paweł Piotr Michałowski

Polymer, 2025, 320, 128100
DOI: 10.1016/j.polymer.2025.128100

Effect of mechanochemical milling on the properties of Ag₂O self-reducing pastes for conductive layers in flexible electronics

Alena Pietrikova, Peter Provazek, Peter Lukacs, Daniel Dzivy, Karel Saksl, Beata Ballokova, Robert Dzunda and Peter Nemergut

J Mater Sci: Mater Electron, 2025, 36
DOI: 10.1007/s10854-025-14893-x

Fast Solid-Phase Exfoliation of Layered Double Hydroxides with Tunable Functionalization

Shana Wang, Si Qin, Guoliang Yang, Yuchen Liu, Tairan Yang, Zhiyu Wang, Xinhao Li, Dan Liu and Weiwei Lei

ACS Appl. Mater. Interfaces, 2024, 16, 69725
DOI: 10.1021/acsami.4c16111

Mechanochemical synthesis of Fe2O3/Zn-Al layered double hydroxide based on red mud

Qingyong Li, Guangtao Wei, Yanjuan Yang, Zhongmin Li, Linye Zhang and Qiumei Huang

Journal of Hazardous Materials, 2020, 394, 122566
DOI: 10.1016/j.jhazmat.2020.122566

Production of ready-to-use few-layer graphene in aqueous suspensions

Jose M González-Domínguez, Verónica León, María Isabel Lucío, Maurizio Prato and Ester Vázquez

Nat Protoc, 2018, 13, 495
DOI: 10.1038/nprot.2017.142

Dispersants and particle dispersion uniformity in lithium batteries: from slurry formulation to solid-state design

Chia-Chen Li

Energy Storage Materials, 2025, 81, 104460
DOI: 10.1016/j.ensm.2025.104460

Fabrication of Al18B4O33 Spherical Powder with Increased Fluidity via Control of B2O3 Particle Size and Distribution

Kiho Song, Sang in Lee, Hyunseung Song and Changui Ahn

J Powder Mater, 2024, 31, 513
DOI: 10.4150/jpm.2024.00304

Salient Achievements in Synthetic Organic Chemistry Enabled by Mechanochemical Activation

Eusebio Juaristi and C. Gabriela Avila-Ortiz

Synthesis, 2023, 55, 2439
DOI: 10.1055/a-2085-3410

Antibacterial, and biocompatible nanocomposites of CuCO3/MgO and chitosan via ball-milling

Hanaa Almaghamsi

Ceramics International, 2025, 51, 5998
DOI: 10.1016/j.ceramint.2024.12.046

A carbon ink for use in thin, conductive, non peelable, amphiphilic, antioxidant, and large-area current collector coating with enhanced lithium ion battery performance

Kuan-Ting Chen, Yi-Chun Yang, Yuan-Hsing Yi, Xiang-Ting Zheng and Hsing-Yu Tuan

Journal of Colloid and Interface Science, 2021, 598, 155
DOI: 10.1016/j.jcis.2021.03.146

Carbon Nanotube Reinforced Natural Fibers for Biodegradable Nanocomposites

Md. Johurul Islam, Kamaru zzaman, Mohammad Jellur Rahman and Md. Monjarul Alam

SSRN Journal, 2021
DOI: 10.2139/ssrn.3909870

Mono- and Bis-Alkylation of Glyoxal-Bridged Tetraazamacrocycles Using Mechanochemistry

Bassim H. Abdulwahaab, Benjamin P. Burke, Juozas Domarkas, Jon D. Silversides, Timothy J. Prior and Stephen J. Archibald

J. Org. Chem., 2016, 81, 890
DOI: 10.1021/acs.joc.5b02464

Unveiling one-pot scalable fabrication of reusable carboxylated heterogeneous carbon-based catalysts from eucalyptus plant with the assistance of dry ice for selective hydrolysis of eucalyptus biomass

Hassan Idris Abdu, Kamel Eid, Aboubakr M. Abdullah, Zhengang Han, Mohammed Hassan Ibrahim, Duoliang Shan, Jing Chen, Ahmed A. Elzatahry and Xiaoquan Lu

Renewable Energy, 2020, 153, 998
DOI: 10.1016/j.renene.2020.02.034

Acidic Ultrafine Tungsten Oxide Molecular Wires for Cellulosic Biomass Conversion

Zhenxin Zhang, Masahiro Sadakane, Norihito Hiyoshi, Akihiro Yoshida, Michikazu Hara and Wataru Ueda

Angew Chem Int Ed, 2016, 55, 10234
DOI: 10.1002/anie.201602770

Ball milling for mechanochemical reactions

Isaiah R. Speight, Karen J. Ardila-Fierro, José G. Hernández, Franziska Emmerling, Adam A. L. Michalchuk, Felipe García, Evelina Colacino and James Mack

Nat Rev Methods Primers, 2025, 5
DOI: 10.1038/s43586-025-00401-2

ZrB2-TiB2 Nanocomposite Powder Prepared by Mechanical Alloying

Luo Ping, Dong Shijie, Yangli Anzhuo, Sun Shixuan, Xie Zhixiong, Zheng Zhong and Yang Wei

Rare Metal Materials and Engineering, 2016, 45, 1381
DOI: 10.1016/S1875-5372(16)30117-5

Oral supplementation of solvent-free kynurenic acid/cyclodextrin nanosponges complexes increased its bioavailability

Yousef Khazaei Monfared, Alberto Rubin Pedrazzo, Mohammad Mahmoudian, Fabrizio Caldera, Parvin Zakeri-Milani, Hadi Valizadeh, Roberta Cavalli, Adrián Matencio and Francesco Trotta

Colloids and Surfaces B: Biointerfaces, 2023, 222, 113101
DOI: 10.1016/j.colsurfb.2022.113101

Mechanistic modeling and simulation of a wet planetary ball mill

Victor A. Rodriguez, Luciane Ribas, Arno Kwade and Luís Marcelo Tavares

Powder Technology, 2023, 429, 118901
DOI: 10.1016/j.powtec.2023.118901

Top-Down Preparation of Nanoquartz for Toxicological Investigations

Chiara Bellomo, Cristina Pavan, Gianluca Fiore, Guillermo Escolano-Casado, Lorenzo Mino and Francesco Turci

IJMS, 2022, 23, 15425
DOI: 10.3390/ijms232315425

Metal-catalyzed organic reactions using mechanochemistry

José G. Hernández and Tomislav Friščić

Tetrahedron Letters, 2015, 56, 4253
DOI: 10.1016/j.tetlet.2015.03.135

Mechanochemical Synthesis of Nitrogen-Deficient Mesopore-Rich Polymeric Carbon Nitride with Highly Enhanced Photocatalytic Performance

Guiming Ba, Tingting Huo, Quanhua Deng, Haiping Li and Wanguo Hou

ACS Sustainable Chem. Eng., 2020, 8, 18606
DOI: 10.1021/acssuschemeng.0c06851

Fabrication of Organic/Inorganic Nanocomposites: From Traditional Synthesis to Additive Manufacturing

Liwen Zhang, Xumin Huang, Liwei Liu, Naufal Kabir Ahamed Nasar, Xinyan Gu, Thomas P. Davis, Xiaoyu (Rayne) Zheng, Lianzhou Wang and Ruirui Qiao

Advanced Materials, 2025
DOI: 10.1002/adma.202505504

Architecting strength: Innovative microstructural design of Aluminum/Alumina Nanocomposites via cold-welded flaky-shaped particles and pressure-assisted sintering

Behzad Sadeghi, Behzad Sadeghian, Pasquale Cavaliere and Aboozar Taherizadeh

Materialia, 2024, 34, 102083
DOI: 10.1016/j.mtla.2024.102083

Eco‐Friendly Mechanochemical Synthesis of Bifunctional Metal Oxide Electrocatalysts for Zn‐Air Batteries

M. García‐Rodríguez, D. Cazorla‐Amorós and E. Morallón

ChemSusChem, 2024
DOI: 10.1002/cssc.202401055

Shear flow of cohesive powders with contact crystallization: experiment, model and calibration

A. Weuster, S. Strege, L. Brendel, H. Zetzener, D. E. Wolf and A. Kwade

Granular Matter, 2015, 17, 271
DOI: 10.1007/s10035-015-0555-3

Sustainable mechanochemical synthesis of β-cyclodextrin polymers by twin screw extrusion

Alberto Rubin Pedrazzo, Francesco Trotta, Gjylije Hoti, Federico Cesano and Marco Zanetti

Environ Sci Pollut Res, 2022, 29, 251
DOI: 10.1007/s11356-021-15187-5

Insight into the Oxygen-Sensing Mechanisms of TiO2–CeO2 Mixed Oxides Treated in a High-Energy Ball Mill: An XPS Analysis

Jelena N. Stevanović, Ana G. Silva, Nenad Bundaleski, Dana Vasiljević-Radović, Milija Sarajlić, Orlando M. N. D. Teodoro and Srđan P. Petrović

Inorganics, 2025, 13, 159
DOI: 10.3390/inorganics13050159

Milling Activation for the Solvent-Free Synthesis of Zeolites. A Practical Guide

Agnieszka Kornas, Joanna E. Olszówka, Petr Klein and Veronika Pashkova

Catalysts, 2021, 11, 246
DOI: 10.3390/catal11020246

Properties of arsenic sulphide (β-As4S4) modified by mechanical activation

Peter Baláž, Matej Baláž, Oleh Shpotyuk, Pavlo Demchenko, Miroslav Vlček, Maya Shopska, Jaroslav Briančin, Zdenka Bujňáková, Yaroslav Shpotyuk, Barbora Selepová and Ľudmila Balážová

J Mater Sci, 2017, 52, 1747
DOI: 10.1007/s10853-016-0466-7

Mechanochemical Palladium‐Catalyzed Carbonylative Reactions Using Mo(CO)6

Pit van Bonn, Carsten Bolm and José G. Hernández

Chemistry A European J, 2020, 26, 2576
DOI: 10.1002/chem.201904528

Mechanochemical synthesis of catalysts and reagents for water decontamination: Recent advances and perspective

Zhou Yin, Qianxin Zhang, Shangyi Li, Giovanni Cagnetta, Jun Huang, Shubo Deng and Gang Yu

Science of The Total Environment, 2022, 825, 153992
DOI: 10.1016/j.scitotenv.2022.153992

Influence of different stress types on the mechanochemical CaCO3-synthesis

Victor Marcus Oldhues, Desislava Dobreva, Lars Borchardt, Arno Kwade and Sandra Breitung-Faes

Powder Technology, 2025, 466, 121449
DOI: 10.1016/j.powtec.2025.121449

Electrochemical properties of heteroatom doped graphyne sheet for energy storage devices

Chang-Yong Lee, Ki-Wook Sung and Hyo-Jin Ahn

Journal of Energy Storage, 2025, 109, 115064
DOI: 10.1016/j.est.2024.115064

In situ X-ray diffraction monitoring of a mechanochemical reaction reveals a unique topology metal-organic framework

Athanassios D. Katsenis, Andreas Puškarić, Vjekoslav Štrukil, Cristina Mottillo, Patrick A. Julien, Krunoslav Užarević, Minh-Hao Pham, Trong-On Do, Simon A. J. Kimber, Predrag Lazić, Oxana Magdysyuk, Robert E. Dinnebier, Ivan Halasz and Tomislav Friščić

Nat Commun, 2015, 6
DOI: 10.1038/ncomms7662

Aqueous Mechanical Oxidation of Zn Dust: An Inventive Technique for Bulk Production of ZnO Nanorods

Santhosh Balanand, Kunnathuparambil Babu Babitha, Mathews Jeen Maria, Abdul Azeez Peer Mohamed and Solaiappan Ananthakumar

ACS Sustainable Chem. Eng., 2018, 6, 143
DOI: 10.1021/acssuschemeng.7b01966

Electro‐Mechanochemical Atom Transfer Radical Cyclizations using Piezoelectric BaTiO3

Christian Schumacher, José G. Hernández and Carsten Bolm

Angew Chem Int Ed, 2020, 59, 16357
DOI: 10.1002/anie.202003565

Continuous and Intermittent Planetary Ball Milling Effects on the Alloying of a Bismuth Antimony Telluride Powder Mixture

Georgios Samourgkanidis and Theodora Kyratsi

Inorganics, 2023, 11, 221
DOI: 10.3390/inorganics11050221

Nanostructured Powders of AA7075 - SiC Manufactured by High-Energy Ball Milling in a Bath of Isopropyl Alcohol

Wésia Amanda de Oliveira Barbosa, Euclides Apolinário Cabral de Pina, Alexandre Douglas Araújo de Moura, Pilar Rey Rodrigues, Oscar Olímpio de Araújo Filho, Ivanilda Ramos de Melo and Heronilton Mendes de Lira

Mat. Res., 2023, 26
DOI: 10.1590/1980-5373-mr-2023-0230

An Environmentally Sustainable Mechanochemical Route to Hydroxamic Acid Derivatives

Rita Mocci, Lidia De Luca, Francesco Delogu and Andrea Porcheddu

Adv Synth Catal, 2016, 358, 3135
DOI: 10.1002/adsc.201600350

Frictional Behavior and Mechanical Performance of Al Reinforced with SiC via Novel Flake Powder Metallurgy

Nabeel H. Alharthi, Saud M. Almotairy and Abdulrahman M. Almutairi

Metals, 2022, 12, 323
DOI: 10.3390/met12020323

A Review of Top‐Down Strategies for the Production of Quantum‐Sized Materials

Zhexue Chen, Ce Zhao, Xuanping Zhou, Liuyang Xiao, Zhangqiang Li and Yong Zhang

Small Science, 2023, 3
DOI: 10.1002/smsc.202300086

Rationally combining processing strategies to improve the extractability and foaming properties of proteins from potato trimmings

Ben Van den Wouwer, Matthis Vanhonacker, Kristof Brijs, Katleen Raes and Arno G.B. Wouters

Innovative Food Science & Emerging Technologies, 2025, 104, 104065
DOI: 10.1016/j.ifset.2025.104065

Advances in Synthesis of High‐Performance Thermoelectric Materials

Ting Lu, Lei Chen, Xiao‐Lei Shi, Weidi Liu, Meng Li, Yuan Wang, Xuesen Zeng, Pingan Song, John Bell, Gerald Jeffery Snyder, Zhi‐Gang Chen and Min Hong

Small Structures, 2025, 6
DOI: 10.1002/sstr.202400694

Evaluation of particle size reduction and agglomeration in dry grinding of natural quartz in a planetary ball mill

Pedro L. Guzzo, Filipe B. Marinho de Barros, Bruno R. Soares and Juliano B. Santos

Powder Technology, 2020, 368, 149
DOI: 10.1016/j.powtec.2020.04.052

Effects of ball-to-powder diameter ratio and powder particle shape on EDEM simulation in a planetary ball mill

Kyong-Chol Kim, Tao Jiang, Nam-Il Kim and Cholu Kwon

Journal of the Indian Chemical Society, 2022, 99, 100300
DOI: 10.1016/j.jics.2021.100300

Boosting tribo-catalytic conversion of H 2O and CO 2 by Co 3O 4 nanoparticles through metallic coatings in reactors

Xuchao Jia, Hongbo Wang, Hua Lei, Chenyue Mao, Xiaodong Cui, Yong Liu, Yanmin Jia, Wenqing Yao and Wanping Chen

Journal of Advanced Ceramics, 2023, 12, 1833
DOI: 10.26599/JAC.2023.9220791

The Choice Is Yours: Using Liquid-Assisted Grinding To Choose between Products in the Palladium-Catalyzed Dimerization of Terminal Alkynes

Longrui Chen, Mark Regan and James Mack

ACS Catal., 2016, 6, 868
DOI: 10.1021/acscatal.5b02001

Wear behavior of silica and alumina-based nanocomposites reinforced with multi walled carbon nanotubes and graphene nanoplatelets

Nidhi Sharma, Syed Nasimul Alam, Bankim Chandra Ray, Surekha Yadav and Krishanu Biswas

Wear, 2019, 418-419, 290
DOI: 10.1016/j.wear.2018.10.008

sp2@sp3 Effect of a Nanodiamond Greenly Driving Epoxy with Superior Fire Safety and Mechanical Properties

Qi Wang, Yujie Dong, Yangjiahua Mao, Bingwei Zhong, You Zeng, Yan Qu, Xuezheng Yang, Yaxuan Zheng, Lei Ji, Xuran Sun, Huabing Tan and Zhu-Bao Shao

ACS Sustainable Chem. Eng., 2023, 11, 16902
DOI: 10.1021/acssuschemeng.3c03984

Preparation and Characterization of Zinc Ferrite and Gadolinium Iron Garnet Composite for Biomagnetic Applications

Bárbara Costa, João Carvalho, Sílvia Gavinho, Tânia Vieira, Jorge Carvalho Silva, Paula I. P. Soares, Manuel A. Valente, Sílvia Soreto and Manuel Graça

Materials, 2024, 17, 2949
DOI: 10.3390/ma17122949

Investigate the effects of synthesizing techniques on the particle size reduction and thermal behaviors of carbon-based material from natural wood charcoal

Barlin and W C Chang

J. Phys.: Conf. Ser., 2019, 1282, 012020
DOI: 10.1088/1742-6596/1282/1/012020

New insights into ball-milled zero-valent iron composites for pollution remediation: An overview

Peng Wang, Jian Hu, Tingyi Liu, Guilin Han, Wen-min Ma and Jun Li

Journal of Cleaner Production, 2023, 385, 135513
DOI: 10.1016/j.jclepro.2022.135513

Bulk processing of ZnO nanostructures via microwave assisted oxidation of mechanically seeded Zn dust for functional paints and coatings

Santhosh Balanand, Mathews Jeen Maria, T.P.D. Rajan, A. Peer Mohamed and S. Ananthakumar

Chemical Engineering Journal, 2016, 284, 657
DOI: 10.1016/j.cej.2015.08.163

Effect of particle size of persimmon by‐product powders on their physicochemical properties and antioxidant activities in porcine patties

Karna Ramachandraiah and Koo Bok Chin

J Food Process Engineering, 2018, 41
DOI: 10.1111/jfpe.12610

Graphene Quantum Dot–Aerogel: From Nanoscopic to Macroscopic Fluorescent Materials. Sensing Polyaromatic Compounds in Water

Ana Martín-Pacheco, Antonio Esaú Del Río Castillo, Cristina Martín, María Antonia Herrero, Sonia Merino, José Luis García Fierro, Enrique Díez-Barra and Ester Vázquez

ACS Appl. Mater. Interfaces, 2018, 10, 18192
DOI: 10.1021/acsami.8b02162

Rigidly-mounted roll mill as breakage tester for characterizing fine particle breakage

Ann-Christin Böttcher, Christoph Thon, Greta Fragnière, Anderson Chagas, Carsten Schilde and Arno Kwade

Powder Technology, 2021, 383, 554
DOI: 10.1016/j.powtec.2021.01.055

Perspective: High pressure transformations in nanomaterials and opportunities in material design

Denis Machon, Vittoria Pischedda, Sylvie Le Floch and Alfonso San-Miguel

Journal of Applied Physics, 2018, 124
DOI: 10.1063/1.5045563

Fabrication of homogeneous nanosized nickel powders using a planetary ball mill: Applications to multilayer ceramic capacitors (MLCCs)

Taehyeob Im, Jungseok Pyo, Jai-sung Lee and Caroline Sunyong Lee

Powder Technology, 2021, 382, 118
DOI: 10.1016/j.powtec.2020.12.043

Green Chemistry’s Contribution to the Kamal Qureshi Protocol: Comparing Various Activating Modes, the Use of Bentonitic Clay as the Catalyst, and the Use of a Green Solvent

Amira Jalil Fragoso-Medina, Jesús A. Hernández-Fernández, María Inés Nicolás-Vázquez, Joel Martínez, Adriana Lizbeth Rivera Espejel, María Z. Saavedra-Leos, Francisco Javier Pérez Flores and René Miranda Ruvalcaba

Catalysts, 2025, 15, 238
DOI: 10.3390/catal15030238

Numerical and experimental investigations on new jar designs for high efficiency planetary ball milling

M. Broseghini, M. D’Incau, L. Gelisio, N.M. Pugno and P. Scardi

Advanced Powder Technology, 2020, 31, 2641
DOI: 10.1016/j.apt.2020.04.027

Modeling Analysis of Ball-Milling Process for Battery-Electrode Synthesis

Christopher Welch, Kyu Taek Cho and Venkat Srinivasan

Chem. Mater., 2024, 36, 6748
DOI: 10.1021/acs.chemmater.4c00332

Novel Strategies for the Formulation of Poorly Water-Soluble Drug Substances by Different Physical Modification Strategies with a Focus on Peroral Applications

Julian Quodbach, Eduard Preis, Frank Karkossa, Judith Winck, Jan Henrik Finke and Denise Steiner

Pharmaceuticals, 2025, 18, 1089
DOI: 10.3390/ph18081089

Advances in ion-doping of Ca-Mg silicate bioceramics for bone tissue engineering

Ashkan Namdar and Erfan Salahinejad

Coordination Chemistry Reviews, 2023, 478, 215001
DOI: 10.1016/j.ccr.2022.215001

Process parameter dependent growth phenomena of naproxen nanosuspension manufactured by wet media milling

A. Bitterlich, C. Laabs, I. Krautstrunk, M. Dengler, M. Juhnke, A. Grandeury, H. Bunjes and A. Kwade

European Journal of Pharmaceutics and Biopharmaceutics, 2015, 92, 171
DOI: 10.1016/j.ejpb.2015.02.031

Synergistic effect between ultrasound and fierce mechanical activation towards mineral extraction: A case study of ZnO ore

Hongping He, Jianglin Cao and Ning Duan

Ultrasonics Sonochemistry, 2018, 48, 163
DOI: 10.1016/j.ultsonch.2018.05.025

A combination of density-based clustering method and DEM to numerically investigate the breakage of bonded pharmaceutical granules in the ball milling process

Alexander Krok, Peter Peciar, Kieran Coffey, Keith Bryan and Sandra Lenihan

Particuology, 2021, 58, 153
DOI: 10.1016/j.partic.2021.03.008

Pd Supported on CeO2 Nanostructures Prepared by Planetary Ball Milling under a Modified Atmosphere for Catalytic Oxidation of CO

Enrique Marín, Xavier Vendrell and Jordi Llorca

ACS Appl. Nano Mater., 2025, 8, 12151
DOI: 10.1021/acsanm.5c01769

Mechanical activation of metallic powders and reactivity of activated nanocomposites: a molecular dynamics approach

Florence Baras, Quentin Bizot, Adrien Fourmont, Sophie Le Gallet and Olivier Politano

Appl. Phys. A, 2021, 127
DOI: 10.1007/s00339-021-04700-9

Assessment of amorphization behavior of a drug during co-grinding with an amino acid by discrete element method simulation

Akira Kitayama, Kazunori Kadota, Seika Fujioka, Yuto Konishi, Hiromasa Uchiyama, Yuichi Tozuka, Atsuko Shimosaka, Mikio Yoshida and Yoshiyuki Shirakawa

Journal of Industrial and Engineering Chemistry, 2018, 62, 436
DOI: 10.1016/j.jiec.2018.01.027

Improving the catalytic activity of bentonite-based bismuth ferrites composite via mechanical activation for photo-Fenton process

Guangtao Wei, Yanjuan Yang, Yunshang Li, Linye Zhang, Zhongmin Li and Runlin Mo

Materials Chemistry and Physics, 2021, 260, 124118
DOI: 10.1016/j.matchemphys.2020.124118

Preparation of Nanocrystalline Fe₂O₃ Powder by Cryomilling with Liquid Nitrogen and its Magnetic Property

Zhi Wei Zhang, Bing Wei Luo, Hai Tao Zhou and Fen Wang

MSF, 2020, 993, 806
DOI: 10.4028/www.scientific.net/MSF.993.806

Organic Synthesis without Conventional Solvents

Martin Obst and Burkhard König

Eur J Org Chem, 2018, 2018, 4213
DOI: 10.1002/ejoc.201800556

Structural transformation of porous and disordered carbon during ball-milling

Renlu Yuan, Yue Dong, Ruoyang Hou, Lei Shang, Jiapeng Zhang, Su Zhang, Xiaohong Chen and Huaihe Song

Chemical Engineering Journal, 2023, 454, 140418
DOI: 10.1016/j.cej.2022.140418

Finite Element and Multibody Dynamics Analysis of a Ball Mill Glass Crusher

Jihad Rishmany, Rodrigue Imad and Angelos Markopoulos

Modelling and Simulation in Engineering, 2023, 2023, 1
DOI: 10.1155/2023/1905702

Metal‐Catalyzed Organic Reactions by Resonant Acoustic Mixing**

Lori Gonnet, Cameron B. Lennox, Jean‐Louis Do, Ivani Malvestiti, Stefan G. Koenig, Karthik Nagapudi and Tomislav Friščić

Angew Chem Int Ed, 2022, 61
DOI: 10.1002/anie.202115030

The latest research progress on MnZn ferrite and their applications

Zhexue Chen, Teng Li, Anping Wang, Minxia Shi and Bangcheng Han

Open Ceramics, 2025, 21, 100732
DOI: 10.1016/j.oceram.2024.100732

Optimization of mechanochemical surface modification parameters on planetary mill using an I-optimal experimental design

Akın Özdemir and Metin Uçurum

Powder Technology, 2024, 436, 119495
DOI: 10.1016/j.powtec.2024.119495

Investigation of Influence of Input Energy during Ball Milling of Aluminum Powder

S.V. Klinkov, V.F. Kosarev, A.E. Chesnokov, A.V. Smirnov and T.M. Vidyuk

SSP, 2021, 313, 143
DOI: 10.4028/www.scientific.net/SSP.313.143

Ball milling nano-sized biochar: bibliometrics, preparation, and environmental application

Lingfeng Zeng, Jiezhi Ma, Jie Yang, Jian Yang, Xiangzhou Zeng and Yaoyu Zhou

Environ Sci Pollut Res, 2024, 31, 52724
DOI: 10.1007/s11356-024-34777-7

HCB dechlorination combined with heavy metals immobilization in MSWI fly ash by using n-Al/CaO dispersion mixture

Shuyao Yu, Bing Du, Amanjiao Baheiduola, Chao Geng and Jianguo Liu

Journal of Hazardous Materials, 2020, 392, 122510
DOI: 10.1016/j.jhazmat.2020.122510

Scalable synthesis of heterostructure molybdenum and nickel sulfides nanosheets for efficient hydrogen generation in alkaline electrolyte

Chaoyun Tang, Hui Zhang, Kuofeng Xu, Qi Hu, Fengjiao Li, Chuanxin He, Qianling Zhang, Jianhong Liu and Liangdong Fan

Catalysis Today, 2018, 316, 171
DOI: 10.1016/j.cattod.2018.03.010

Mechanochemical activation of natural clay minerals: an alternative to produce sustainable cementitious binders – review

Ilda Tole, Karin Habermehl-Cwirzen and Andrzej Cwirzen

Miner Petrol, 2019, 113, 449
DOI: 10.1007/s00710-019-00666-y

Microstructure dependent dislocation density evolution in micro-macro rolled Al2O3/Al laminated composite

Behzad Sadeghi, Pasquale Cavaliere, Martin Balog, Catalin Iulian Pruncu and Ali Shabani

Materials Science and Engineering: A, 2022, 830, 142317
DOI: 10.1016/j.msea.2021.142317

Review on high-performance bulk MgB2 superconductors

M Muralidhar, Malik Shadab, A Sai Srikanth, M Jirsa and J Noudem

J. Phys. D: Appl. Phys., 2024, 57, 053001
DOI: 10.1088/1361-6463/ad039a

Optimizing rice bran ball milling via a friction-coupled population balance model: Integrating comminution theory and energy efficiency

Rogério Andrade, Amanda Barros, Leonardo Batista, Janaina Lima, Ana Sarinho, Renata Almeida and Hugo M. Lisboa

Particuology, 2025, 105, 36
DOI: 10.1016/j.partic.2025.07.013

Effect of jar shape on high-energy planetary ball milling efficiency: Simulations and experiments

M. Broseghini, M. D'Incau, L. Gelisio, N.M. Pugno and P. Scardi

Materials & Design, 2016, 110, 365
DOI: 10.1016/j.matdes.2016.06.118

Preparation of Ultrafine Disperse Dyes Based on the Efficiency Balance of Grinding and Dyeing

Jingsi Qiu, Yue Liu and Ashanul Haque

Journal of Chemistry, 2022, 2022, 1
DOI: 10.1155/2022/8254447

Interfacial reaction and side effect of MgB2 superconducting material through low-rotation mechanical milling

Minoru Maeda, Yoon-Uk Heo, Jun Hyuk Choi, Dipak Patel, Su-Hun Kim, Seungyong Hahn, Jung Ho Kim and Seyong Choi

Ceramics International, 2022, 48, 6539
DOI: 10.1016/j.ceramint.2021.11.201

Modeling of the planetary ball-milling process: The case study of ceramic powders

M. Broseghini, L. Gelisio, M. D’Incau, C.L. Azanza Ricardo, N.M. Pugno and P. Scardi

Journal of the European Ceramic Society, 2016, 36, 2205
DOI: 10.1016/j.jeurceramsoc.2015.09.032

Hollow Superparamagnetic Nanoparticle-Based Microballoons for Mechanical Force Monitoring by Magnetic Particle Spectroscopy

Susanne Wintzheimer, Stephan Müssig, Sarah Wenderoth, Johannes Prieschl, Tim Granath, Florian Fidler, Daniel Haddad and Karl Mandel

ACS Appl. Nano Mater., 2019, 2, 6757
DOI: 10.1021/acsanm.9b01693

Sustainability Assessment of Mechanochemistry by Using the Twelve Principles of Green Chemistry

Karen J. Ardila‐Fierro and José G. Hernández

ChemSusChem, 2021, 14, 2145
DOI: 10.1002/cssc.202100478

Evaluation of Processes for Mechanical Manufacturing of Composite Materials for Li‐Sulfur Batteries

Paul Titscher, Sabrina Zellmer, Christine F. Burmeister, Lars O. Schmidt, Sandra Breitung‐Faes, Georg Garnweitner and Arno Kwade

Chemie Ingenieur Technik, 2018, 90, 513
DOI: 10.1002/cite.201700121

The effect of zircon particle size on the surface properties of sanitaryware glaze

Gülsüm Topateş, Burak Alıcı, Baran Tarhan and Müge Tarhan

Mater. Res. Express, 2020, 7, 015203
DOI: 10.1088/2053-1591/ab657d

Mechanochemistry Applied to the Synthesis of X-ray Contrast Agent

Alessandro Barge, Francesca Baricco, Giancarlo Cravotto, Roberta Fretta and Luciano Lattuada

ACS Sustainable Chem. Eng., 2020, 8, 12825
DOI: 10.1021/acssuschemeng.0c02928

Mechanochemical Degradation of Biopolymers

László Jicsinszky, Fabio Bucciol, Salah Chaji and Giancarlo Cravotto

Molecules, 2023, 28, 8031
DOI: 10.3390/molecules28248031

Solvent‐free Reactions for the Synthesis of Indolenine‐based Squaraines and Croconaines: Comparison of Thermal Heating, Mechanochemical Milling, and IR Irradiation

Nicola Zappimbulso, Maria Annunziata M. Capozzi, Andrea Porcheddu, Gianluca M. Farinola and Angela Punzi

ChemSusChem, 2021, 14, 1363
DOI: 10.1002/cssc.202002763

Mechanochemical destruction and mineralization of solid-phase hexabromocyclododecane assisted by microscale zero-valent aluminum

Shiying Yang, Xinrong Sun, Yuting Jiang, Sui Wu and Dongye Zhao

Science of The Total Environment, 2022, 824, 153864
DOI: 10.1016/j.scitotenv.2022.153864

Effects of ball‐milling treatment on mussel (Mytilus edulis) protein: structure, functional properties and in vitro digestibility

Cuiping Yu, Yue Cha, Fan Wu, Weiwei Fan, Xianbing Xu and Ming Du

Int J of Food Sci Tech, 2018, 53, 683
DOI: 10.1111/ijfs.13643

Rationalization of planetary ball milling process of boehmite γ-AlOOH: Towards operating conditions dependent transition alumina phase diagram

Youcef Mechiche, Dina Lofficial, Séverine Humbert, Mathieu Digne and Alain Méthivier

Powder Technology, 2024, 433, 119179
DOI: 10.1016/j.powtec.2023.119179

Wet milling synthesis of NH4CoPO4·H2O platelets: Formation reaction, growth mechanism, and conversion into high-voltage LiCoPO4 cathode for Li-ion batteries

Takahiro Kozawa, Kayo Fukuyama, Akira Kondo and Makio Naito

Materials Research Bulletin, 2021, 135, 111149
DOI: 10.1016/j.materresbull.2020.111149

Effects of the speed ratio on the efficiency of planetary mills

C. Real and F.J. Gotor

Heliyon, 2019, 5, e01227
DOI: 10.1016/j.heliyon.2019.e01227

Mechanochemical Preparation of Pd(II) and Pt(II) Composites with Carbonaceous Materials and Their Application in the Suzuki-Miyaura Reaction at Several Energy Inputs

Mohamed M.A. Soliman, Andreia F. Peixoto, Ana P.C. Ribeiro, Maximilian N. Kopylovich, Elisabete C.B.A. Alegria and Armando J.L. Pombeiro

Molecules, 2020, 25, 2951
DOI: 10.3390/molecules25122951

Enhanced Vitamin D3 Adsorption Through Novel Hydrophobic Halloysite–Alginate Biopolymer Composites

Mervenur Kirazoğlu and Birgül Benli

Polymers, 2025, 17, 1083
DOI: 10.3390/polym17081083

CuNb2O6 Particles Obtained via Solid-State Reaction and Application as Electrocatalyst for Oxygen Evolution Reaction

Kívia F. G. de Araújo, Cleber S. Lourenço, Vitor M. S. F. Souza, Matheus D. da Silva, Gabriel D. S. Vasconcelos, Maria J. S. Lima, Jakeline R. D. Santos, Kelly C. Gomes, Francisco J. A. Loureiro, Marco A. Morales and Uílame U. Gomes

Ceramics, 2025, 8, 55
DOI: 10.3390/ceramics8020055

Analysis Of Alumina Particles Size And Shape Formation From Developed Planetary Ball Mill

D. Ramasamy, K. Mohanesen, R Maria, M. Samykano, K. Kadirgama and M.M. Rahman

IOP Conf. Ser.: Mater. Sci. Eng., 2020, 736, 052032
DOI: 10.1088/1757-899X/736/5/052032

Enhancing Sodium-Ion Energy Storage of Commercial Activated Carbon by Constructing Closed Pores via Ball Milling

Xiaojie Wang, Qian Fang, Tiejun Zheng, Yanyan Xu, Rui Dai, Zhijun Qiao, Dianbo Ruan and Yuzuo Wang

Nanomaterials, 2023, 14, 65
DOI: 10.3390/nano14010065

Mechanochemistry: A Green Approach in the Preparation of Pharmaceutical Cocrystals

Mizraín Solares-Briones, Guadalupe Coyote-Dotor, José C. Páez-Franco, Miriam R. Zermeño-Ortega, Carmen Myriam de la O Contreras, Daniel Canseco-González, Alcives Avila-Sorrosa, David Morales-Morales and Juan M. Germán-Acacio

Pharmaceutics, 2021, 13, 790
DOI: 10.3390/pharmaceutics13060790

Celecoxib Nanoformulations with Enhanced Solubility, Dissolution Rate, and Oral Bioavailability: Experimental Approaches over In Vitro/In Vivo Evaluation

Aslıhan Arslan, Barbaros Yet, Emirhan Nemutlu, Yağmur Akdağ Çaylı, Hakan Eroğlu and Levent Öner

Pharmaceutics, 2023, 15, 363
DOI: 10.3390/pharmaceutics15020363

Carbon-based materials for electrocatalytic energy conversion: from understanding to designing

Zhelin Mao, Yu Fu, Xinyi Long, Cuiyan Li, Mingze Li, Fangfang Zhu, Wenhao Ye, Zhiyong Fan and Xiangdong Yao

Chem. Synth., 2025, 5
DOI: 10.20517/cs.2025.41

Recycling Metals from Wastes: A Novel Application of Mechanochemistry

Quanyin Tan and Jinhui Li

Environ. Sci. Technol., 2015, 49, 5849
DOI: 10.1021/es506016w

Effect of Ball-Milling Pretreatment of Cellulose on Its Photoreforming for H2 Production

Lan Lan, Huanhao Chen, Daniel Lee, Shaojun Xu, Nathan Skillen, Aleksander Tedstone, Peter Robertson, Arthur Garforth, Helen Daly, Christopher Hardacre and Xiaolei Fan

ACS Sustainable Chem. Eng., 2022, 10, 4862
DOI: 10.1021/acssuschemeng.1c07301

Effect of ball milling on the mechanical properties and crystallization of graphene nanoplatelets reinforced short chain branched‐polyethylene

Dimitra Kourtidou, Maria Eirini Grigora, Konstantinos Tsongas, Zoe Terzopoulou, Dimitrios Tzetzis, Dimitrios N. Bikiaris and Konstantinos Chrissafis

J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.50874

Status and outlook for lithium-ion battery cathode material synthesis and the application of mechanistic modeling

Kunal Pardikar, Jake Entwistle, Ruihuan Ge, Denis Cumming and Rachel Smith

J. Phys. Energy, 2023, 5, 022002
DOI: 10.1088/2515-7655/acc139

Mechanosynthesis of β-Cyclodextrin Polymers Based on Natural Deep Eutectic Solvents

Alberto Rubin Pedrazzo, Claudio Cecone, Francesco Trotta and Marco Zanetti

ACS Sustainable Chem. Eng., 2021, 9, 14881
DOI: 10.1021/acssuschemeng.1c04988

Exothermic reactivity-driven structural optimization and performance enhancement for Cu-Al-Si porous materials: A comparison of Gas-Atomized and Ball-Milled Al-Si powders

Zixuan Pang, Zhichao Shang, Chaoqun Xie, Weijia Guo, Xinyang Jiao, Baojing Zhang, Jianzhong Wang and Peizhong Feng

Journal of Alloys and Compounds, 2025, 1036, 181831
DOI: 10.1016/j.jallcom.2025.181831

Boosting the high-temperature graphitization of non-graphitizable carbons by ball-milling

Renlu Yuan, Lei Shang, Jiapeng Zhang, Zipeng Jiang, Xuewei Liu, Ang Li, Haiyan Liu, Su Zhang, Xiaohong Chen and Huaihe Song

Carbon, 2024, 228, 119334
DOI: 10.1016/j.carbon.2024.119334

Chelator-induced recovery of rare earths from end-of-life fluorescent lamps with the aid of mechano-chemical energy

Hiroshi Hasegawa, Zinnat A. Begum, Ryuta Murase, Kento Ishii, Hikaru Sawai, Asami S. Mashio, Teruya Maki and Ismail M.M. Rahman

Waste Management, 2018, 80, 17
DOI: 10.1016/j.wasman.2018.08.049

Extremely Rapid Self‐Healable and Recyclable Supramolecular Materials through Planetary Ball Milling and Host–Guest Interactions

Junsu Park, Shunsuke Murayama, Motofumi Osaki, Hiroyasu Yamaguchi, Akira Harada, Go Matsuba and Yoshinori Takashima

Advanced Materials, 2020, 32
DOI: 10.1002/adma.202002008

Micronization in food processing: A comprehensive review of mechanistic approach, physicochemical, functional properties and self-stability of micronized food materials

Atul Dhiman and Pramod K. Prabhakar

Journal of Food Engineering, 2021, 292, 110248
DOI: 10.1016/j.jfoodeng.2020.110248

Synthesis of InP/ZnS Nanocrystals and Phase Transfer by Hydrolysis of Ester

Franziska Lübkemann, Timo C. Gusenburger, Dominik Hinrichs, Rasmus Himstedt, Dirk Dorfs and Nadja C. Bigall

Zeitschrift für Physikalische Chemie, 2018, 233, 55
DOI: 10.1515/zpch-2018-1167

Rediscovering zeolite mechanochemistry – A pathway beyond current synthesis and modification boundaries

Gerardo Majano, Lars Borchardt, Sharon Mitchell, Valentin Valtchev and Javier Pérez-Ramírez

Microporous and Mesoporous Materials, 2014, 194, 106
DOI: 10.1016/j.micromeso.2014.04.006

Confined multiphase swirled flows in chemical engineering

Andrey O. Kuzmin

Reviews in Chemical Engineering, 2021, 37, 31
DOI: 10.1515/revce-2019-0019

Solution-processed 2D van der Waals networks: Fabrication strategies, properties, and scalable device applications

Dongjoon Rhee, Deep Jariwala, Jeong Ho Cho and Joohoon Kang

Applied Physics Reviews, 2024, 11
DOI: 10.1063/5.0205192

Mechanochemistry: A Resurgent Force in Chemical Synthesis

Nirmalya Mukherjee

Synlett, 2024, 35, 2331
DOI: 10.1055/a-2422-0992

Hydrogen generation behaviors from hydrolysis of cold-welding free magnesium-calcium hydride-expanded graphite composites

Qin Huang, Bingshou Gong, Habibullah, Ziyuan Wang, Yao Wang, Yigang Yan, Yungui Chen and Chaoling Wu

Journal of Power Sources, 2024, 595, 234004
DOI: 10.1016/j.jpowsour.2023.234004

Integrated mechanochemistry and filtrate recycling for sustainable production of phosphorylated cellulose nanofibers

Xue Gao, Lei Zhang, Shaohuang Chen, Mei Cui, Renliang Huang, Wei Qi and Rongxin Su

AIChE Journal, 2025, 71
DOI: 10.1002/aic.18882

ChemInform Abstract: Process Engineering with Planetary Ball Mills

Christine Friedericke Burmeister and Arno Kwade

ChemInform, 2013, 44
DOI: 10.1002/chin.201344249

Aqueous Dispersions of Latex Compounding Ingredients by Wet Ball Milling: Effect of Ball Size and Milling Time on Dispersion Quality

K. Anand, Siby Varghese and Thomas Kurian

Trans Indian Inst Met, 2017, 70, 1593
DOI: 10.1007/s12666-016-0957-x

Metal‐Catalyzed Organic Reactions by Resonant Acoustic Mixing**

Lori Gonnet, Cameron B. Lennox, Jean‐Louis Do, Ivani Malvestiti, Stefan G. Koenig, Karthik Nagapudi and Tomislav Friščić

Angewandte Chemie, 2022, 134
DOI: 10.1002/ange.202115030

Crystallite size reduction of Cr doped Al2O3 materials via optimized high-energy ball milling method

Nurhanna Badar, Hanis Mohd Yusoff, Kelimah Elong and Norlida Kamarulzaman

Advanced Powder Technology, 2023, 34, 104102
DOI: 10.1016/j.apt.2023.104102

Facile Ball Milling Preparation of Flame-Retardant Polymer Materials: An Overview

Xiaming Feng, Xiang Lin, Kaiwen Deng, Hongyu Yang and Cheng Yan

Molecules, 2023, 28, 5090
DOI: 10.3390/molecules28135090

Study of the application of modified thiourea dioxide discharge agent inD5 non‐aqueous medium

Lan Zhou, Jiang Shan, Xiaoyun Liu and Jianzhong Shao

Coloration Technology, 2015, 131, 149
DOI: 10.1111/cote.12129

Comminution and amorphisation of Diaqua-bis(Omeprazolate)-Magnesium Dihydrate: An analysis of the energies involved

Hanane Abouhakim, Mohammadreza Alizadeh Behjani, Michael J. Quayle, Stefan T. Norberg, Sten O. Nilsson Lill, Frans L. Muller and Ali Hassanpour

Powder Technology, 2022, 405, 117415
DOI: 10.1016/j.powtec.2022.117415

Effect of Friction Coefficient from DEM Simulation in Grinding Zone of the Ball Mill

Battsetseg Jargalsaikhan, Amgalan Bor, Khulan Uranchimeg, Jehyun Lee and Heekyu Choi

Korean. J. Mater. Res., 2021, 31, 286
DOI: 10.3740/MRSK.2021.31.5.286

Catalyst‐free one‐pot three‐component rapid synthesis of polysubstituted pyrroles by liquid‐assisted grinding

Ling Jiang, Si‐Yu Yan, Jing‐Wen Dong, Li‐Dan Ye, Yue Cheng and Xiao‐He Chu

Journal of Heterocyclic Chem, 2022, 59, 1561
DOI: 10.1002/jhet.4490

How mechanical pre-treatment affects the extraction yield, nutritional, structural, and functional properties of leaf proteins

Ram Prasad Bebartta, Rachna Sehrawat, Khalid Gul and Ankan Kheto

Food Chemistry, 2025, 489, 144934
DOI: 10.1016/j.foodchem.2025.144934

Real-Time and In Situ Monitoring of Mechanochemical Reactions: A New Playground for All Chemists

Krunoslav Užarević, Ivan Halasz and Tomislav Friščić

J. Phys. Chem. Lett., 2015, 6, 4129
DOI: 10.1021/acs.jpclett.5b01837

Mechanochemistry for Organic Chemists: An Update

Davin Tan and Tomislav Friščić

Eur J Org Chem, 2018, 2018, 18
DOI: 10.1002/ejoc.201700961

Advances in alkali-activation of clay minerals

Ahmed Z. Khalifa, Özlem Cizer, Yiannis Pontikes, Andrew Heath, Pascaline Patureau, Susan A. Bernal and Alastair T.M. Marsh

Cement and Concrete Research, 2020, 132, 106050
DOI: 10.1016/j.cemconres.2020.106050

Waste-to-Energy: Production of Fuel Gases from Plastic Wastes

Cheuk-Fai Chow, Chow-Shing Lam, Kai-Chung Lau and Cheng-Bin Gong

Polymers, 2021, 13, 3672
DOI: 10.3390/polym13213672

Review of the opportunities and limitations for powder-based high-throughput solid-state processing of advanced functional ceramics

Kyle G. Webber, Oliver Clemens, Vincenzo Buscaglia, Barbara Malič, Rajendra K. Bordia, Tobias Fey and Udo Eckstein

Journal of the European Ceramic Society, 2024, 44, 116780
DOI: 10.1016/j.jeurceramsoc.2024.116780

Synthesis of barium titanate with narrow particle size distribution by the oxalate thermal decomposition method

Qiao-Chu Peng, Tian-Yu Hao, Jing Shen, Jie Liu and Cheng Zhong

Tungsten, 2025, 7, 351
DOI: 10.1007/s42864-024-00309-6

Solid Ion Conductors under Pressure: In Situ Monitoring of the Tetragonal to Cubic Phase Transition of Na3SbS4 and Na3PS4

Vasiliki Faka, Martin A. Lange, Dominik Daisenberger, Thorben Böger, Xabier Martinez de Irujo-Labalde, M. Jewels Fallon, Gregor Kieslich and Wolfgang G. Zeier

ACS Materials Lett., 2025, 7, 2648
DOI: 10.1021/acsmaterialslett.5c00593

Enabling technologies and green processes in cyclodextrin chemistry

Giancarlo Cravotto, Marina Caporaso, Laszlo Jicsinszky and Katia Martina

Beilstein J. Org. Chem., 2016, 12, 278
DOI: 10.3762/bjoc.12.30

Nano iron-oxide coated ball-milled K-feldspar had high adhesion capacity for Bacillus subtilis

Shuang Wang, Qimei Lin, Guitong Li and Xiaorong Zhao

Journal of Environmental Chemical Engineering, 2023, 11, 110441
DOI: 10.1016/j.jece.2023.110441

Mechanosynthesis of rhenium carbide at ambient pressure and temperature

M.G. Granados-Fitch, E.A. Juarez-Arellano, J.M. Quintana-Melgoza and M. Avalos-Borja

International Journal of Refractory Metals and Hard Materials, 2016, 55, 11
DOI: 10.1016/j.ijrmhm.2015.11.002

Milling Activation for the Solvent‐Free Synthesis of the Zeolite Mordenite

Agnieszka Kornas, Joanna E. Olszówka, Martina Urbanova, Kinga Mlekodaj, Libor Brabec, Jiri Rathousky, Jiri Dedecek and Veronika Pashkova

Eur J Inorg Chem, 2020, 2020, 2791
DOI: 10.1002/ejic.202000320

Multifunctional HxMoO3–y–MoO2/Carbon Composite Particles for Water Remediation

Kunihiko Kato, Yunzi Xin, Yuping Xu and Takashi Shirai

ACS Appl. Mater. Interfaces, 2024, 16, 65970
DOI: 10.1021/acsami.4c09169

En route to multi-model scheme for clinker comminution with chemical grinding aids

R. K. Mishra, D. Geissbuhler, H. A. Carmona, F. K. Wittel, M. L. Sawley, M. Weibel, E. Gallucci, H. J. Herrmann, H. Heinz and R. J. Flatt

Advances in Applied Ceramics, 2015, 114, 393
DOI: 10.1179/1743676115Y.0000000023

Materials Development Using High-Energy Ball Milling: A Review Dedicated to the Memory of M.A. Korchagin

Dina V. Dudina and Boris B. Bokhonov

J. Compos. Sci., 2022, 6, 188
DOI: 10.3390/jcs6070188

Understanding urea polymorphism and cocrystallization to develop enhanced fertilizers: A review

Vidya Nagaraju, Camila Jange, Carl Wassgren and Kingsly Ambrose

Journal of Environmental Chemical Engineering, 2024, 12, 114308
DOI: 10.1016/j.jece.2024.114308

Fabrication and characterization of reinforced glass ionomer cement by zinc oxide and hydroxyapatite nanoparticles

Reyhaneh Azimi, Mohamad Shahgholi and Amirsalar Khandan

Heliyon, 2024, 10, e39063
DOI: 10.1016/j.heliyon.2024.e39063

Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling

Run Xu, Zhanqiu Tan, Dingbang Xiong, Genlian Fan, Qiang Guo, Jie Zhang, Yishi Su, Zhiqiang Li and Di Zhang

Composites Part A: Applied Science and Manufacturing, 2017, 96, 57
DOI: 10.1016/j.compositesa.2017.02.017

Enhanced recovery of rare earth elements from waste phosphors by mechanical activation

Quanyin Tan, Chao Deng and Jinhui Li

Journal of Cleaner Production, 2017, 142, 2187
DOI: 10.1016/j.jclepro.2016.11.062

Recent Advances in Ball-Milled Materials and Their Applications for Adsorptive Removal of Aqueous Pollutants

Pei Gao, Xuanhao Fan, Da Sun, Guoming Zeng, Quanfeng Wang and Qihui Wang

Water, 2024, 16, 1639
DOI: 10.3390/w16121639

High-performance aluminum-based matrix composites reinforced with high content of boron nitride nanosheets

Yun Wang, Yifan Zhu, Ruitao Li, Hong Liu, Weili Liu and Peiyu He

Journal of Alloys and Compounds, 2022, 906, 164358
DOI: 10.1016/j.jallcom.2022.164358

Mechanochemical Synthesis of Recyclable Biohybrid Polymer Networks Using Whole Biomass

Meng Jiang, Emily Bird, Woojung Ham and Joshua C. Worch

Angew Chem Int Ed, 2025
DOI: 10.1002/anie.202510449

Application of discrete element simulation in mechanical activation of boron concentrate

Kyong-Chol Kim, Tao Jiang, Yingzhe Xu, Nam-Il Kim, Hak-Son Jin and Jong-Chol Kim

Powder Technology, 2021, 382, 441
DOI: 10.1016/j.powtec.2020.12.031

Improvement Parameters of Hydrogen Generation from Water under Stainless-Steel-Mediated Ball Milling Conditions

Miki Itoh, Yoshinari Sawama, Miki Niikawa, Kazuho Ban, Takahiro Kawajiri and Hironao Sajiki

Bulletin of the Chemical Society of Japan, 2020, 93, 1366
DOI: 10.1246/bcsj.20200179

Sustainability of Valuable Metals Recovery from Hazardous Industrial Solid Wastes: The Role of Mechanical Activation

Oluwasegun Samuel Odebiyi, Hao Du, Biao Liu and Shaona Wang

J. Sustain. Metall., 2022, 8, 1393
DOI: 10.1007/s40831-022-00579-9

Preparation of NaIn(WO4)2 nanocrystals and a charge for crystal growth via the free-of-rubbing mechanical activation of the Na2CO3−In2O3−WO3 system

Farit Kh. Urakaev

Mendeleev Communications, 2016, 26, 546
DOI: 10.1016/j.mencom.2016.11.030

Effect of particle size of calcite on the stacking order of kaolinite during mechanical grinding

Shingo Machida, Kenichi Katsumata and Atsuo Yasumori

Int J Ceramic Engine & Sci, 2023, 5
DOI: 10.1002/ces2.10165

Ultrasound assisted wet stirred media mill of high concentration LiFePO4 and catalysts

He Li, Mohammad Rostamizadeh, Kahina Mameri, Daria C. Boffito, Nooshin Saadatkhah, Marco Giulio Rigamonti and Gregory S. Patience

Can J Chem Eng, 2019, 97, 2242
DOI: 10.1002/cjce.23212

Mechanochemistry: Fundamental Principles and Applications

Liang Dong, Luofei Li, Huiyan Chen, Yi Cao and Hai Lei

Advanced Science, 2025, 12
DOI: 10.1002/advs.202403949

Comparative Study of the Morphology of Cellulose Nanofiber Fabricated Using Two Kinds of Grinding Method

Khulan Uranchimeg, Battsetseg Jargalsaikhan, Amgalan Bor, Kiyoung Yoon and Heekyu Choi

Materials, 2022, 15, 7048
DOI: 10.3390/ma15207048

Lignin-Derived Carboxylated Carbon Nanocatalysts for Biomass Hydrolysis: Case Study Cellulose and Eucalyptus

Hassan Idris Abdu, Abdulhamid Usman, Olayinka Oderinde, Samaila Usman, Nihad Abdalla and Taslim Aboudou

SSRN Journal, 2022
DOI: 10.2139/ssrn.4165244

Recent progress on the recycling technology of Li-ion batteries

Yuqing Wang, Ning An, Lei Wen, Lei Wang, Xiaotong Jiang, Feng Hou, Yuxin Yin and Ji Liang

Journal of Energy Chemistry, 2021, 55, 391
DOI: 10.1016/j.jechem.2020.05.008

Facile Preparation Route of Cellulose-Based Flame Retardant by Ball-Milling Mechanochemistry

Mohamed Aaddouz, Fouad Laoutid, Jerome Mariage, Jevgenij Lazko, Bopha Yada, El Miloud Mejdoubi, Antoniya Toncheva and Philippe Dubois

Molecules, 2024, 29, 6065
DOI: 10.3390/molecules29246065

Comminution-amorphisation relationships during ball milling of lactose at different milling conditions

Samaneh Pazesh, Johan Gråsjö, Jonas Berggren and Göran Alderborn

International Journal of Pharmaceutics, 2017, 528, 215
DOI: 10.1016/j.ijpharm.2017.05.043

Mechanochemical activation of basaltic fines

Sofiane Amroun, Luca Galli, Mahfoud Tahlaiti and Prannoy Suraneni

Cement and Concrete Research, 2025, 195, 107923
DOI: 10.1016/j.cemconres.2025.107923

Mechanical activation of magnesium silicates for mineral carbonation, a review

Jiajie Li and Michael Hitch

Minerals Engineering, 2018, 128, 69
DOI: 10.1016/j.mineng.2018.08.034

Efficiently preserving material resources in manufacturing: Industrial symbiosis revisited

J.R. Duflou, K. Wegener, A.E. Tekkaya, M. Hauschild, F. Bleicher, J. Yan and B. Hendrickx

CIRP Annals, 2024, 73, 695
DOI: 10.1016/j.cirp.2024.05.006

Mechanistic Insights on the Mechanosynthesis of Phenytoin, a WHO Essential Medicine**

Francesco Puccetti, Stipe Lukin, Krunoslav Užarević, Evelina Colacino, Ivan Halasz, Carsten Bolm and José G. Hernández

Chemistry A European J, 2022, 28
DOI: 10.1002/chem.202104409

Chalcogenide mechanochemistry in materials science: insight into synthesis and applications (a review)

P. Baláž, M. Baláž, M. Achimovičová, Z. Bujňáková and E. Dutková

J Mater Sci, 2017, 52, 11851
DOI: 10.1007/s10853-017-1174-7

Multi-functional thin film coatings formed via nanogrinding

Raju Sapkota, Jinxiang Zou, Sahil Dawka, Julia E. Bobak and Chris Papadopoulos

Appl Nanosci, 2018, 8, 1437
DOI: 10.1007/s13204-018-0812-y

Data on the synthesis and characterizations of carboxylated carbon-based catalyst from eucalyptus as efficient and reusable catalysts for hydrolysis of eucalyptus

Hassan Idris Abdu, Kamel Eid, Aboubakr M. Abdullah and Xiaoquan Lu

Data in Brief, 2020, 30, 105520
DOI: 10.1016/j.dib.2020.105520

Multigram Mechanochemical synthesis of a Salophen Complex: A Comparative Analysis

Varun Kumar Singh, Alex Chamberlain-Clay, How Chee Ong, Felix León, Gavin Hum, Mian Yang Par, Patrick Daley-Dee and Felipe García

ACS Sustainable Chem. Eng., 2021, 9, 1152
DOI: 10.1021/acssuschemeng.0c06374

Mechanical Cell Disruption Technologies for the Extraction of Dyes and Pigments from Microorganisms: A Review

Georgio Nemer, Nicolas Louka, Eugène Vorobiev, Dominique Salameh, Jean-Marc Nicaud, Richard G. Maroun and Mohamed Koubaa

Fermentation, 2021, 7, 36
DOI: 10.3390/fermentation7010036

Trends in the Preparation and Passivation Techniques of Black Phosphorus Nanostructures for Optoelectronics Applications: A Review

Kaixiang Du, Quanjiang Lv, Zhiping Liang, Guiwu Liu, Shahid Hussain, Junlin Liu and Guanjun Qiao

ACS Appl. Nano Mater., 2023, 6, 3159
DOI: 10.1021/acsanm.2c05549

Screening for new pharmaceutical solid forms using mechanochemistry: A practical guide

Dritan Hasa and William Jones

Advanced Drug Delivery Reviews, 2017, 117, 147
DOI: 10.1016/j.addr.2017.05.001

The puzzling thermal expansion behavior of invar alloys: a review on process-structure-property relationship

Bekir Akgul, Mehmet Kul and Fuat Erden

Critical Reviews in Solid State and Materials Sciences, 2024, 49, 254
DOI: 10.1080/10408436.2023.2170975

OPTIMIZING COAL GRINDING AND MECHANOCHEMICAL OXIDATION: BALANCING ENERGY CONSUMPTION AND EFFICIENCY

Tatiana S. Skripkina, Anna G. Matveeva, Uliana E. Nikiforova, Vladimir A. Bukhtoyarov, Aleksey L. Bychkov and Igor O. Lomovskiy

Inter J Ener Clean Env, 2025, 26, 1
DOI: 10.1615/InterJEnerCleanEnv.2024054363

Effect of Process Control Agents on Fe-15at.%Nb powder during Mechanical Alloying

Marcela Silva Lamoglia, Pedro Henrique Gonçalves, Ágata Mayara Paula Pontes, Leandro Bernardes Serrano, Gilbert Silva and Antonio Augusto Araújo Pinto da Silva

Mat. Res., 2022, 25
DOI: 10.1590/1980-5373-mr-2021-0318

Mechanochemical aspects in wet stirred media milling

Stefan Romeis, Jochen Schmidt and Wolfgang Peukert

International Journal of Mineral Processing, 2016, 156, 24
DOI: 10.1016/j.minpro.2016.05.018

State of the art and prospects in sliver- and copper-matrix composite electrical contact materials

Wenbing Huang, Haojie Yu, Li Wang, Xudong Wu, Chenguang Ouyang, Yanhui Zhang and Jiawen He

Materials Today Communications, 2023, 37, 107256
DOI: 10.1016/j.mtcomm.2023.107256

Ball-milling changed the physicochemical properties of SPI and its cold-set gels

Bohui Liu, Hui Wang, Tan Hu, Peipei Zhang, Zhuo Zhang, Siyi Pan and Hao Hu

Journal of Food Engineering, 2017, 195, 158
DOI: 10.1016/j.jfoodeng.2016.10.006

The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review

Yuqing Guo, Fengwen Pan, Wenmiao Chen, Zhiqiang Ding, Daijun Yang, Bing Li, Pingwen Ming and Cunman Zhang

Electrochem. Energ. Rev., 2021, 4, 67
DOI: 10.1007/s41918-020-00083-2

Interfacial barrier free organic-inorganic hybrid electrolytes for solid state batteries

Myeong Ju Lee, Dong Ok Shin, Ju Young Kim, Jimin Oh, Seok Hun Kang, Jumi Kim, Kwang Man Kim, Yong Min Lee, Sang Ouk Kim and Young-Gi Lee

Energy Storage Materials, 2021, 37, 306
DOI: 10.1016/j.ensm.2021.02.013

Acidic Ultrafine Tungsten Oxide Molecular Wires for Cellulosic Biomass Conversion

Zhenxin Zhang, Masahiro Sadakane, Norihito Hiyoshi, Akihiro Yoshida, Michikazu Hara and Wataru Ueda

Angewandte Chemie, 2016, 128, 10390
DOI: 10.1002/ange.201602770

Enhanced Catalytic Depolymerization of a Kraft Lignin by a Mechanochemical Approach

Huaizhou Yang, Julian R. J. Strien, Ramesh Kumar Chowdari, Zhiwen Wang, Hero J. Heeres and Peter J. Deuss

Energy Fuels, 2022, 36, 6606
DOI: 10.1021/acs.energyfuels.2c01109

Band gap tuning in inorganic chlorine-based halide perovskites via solid-state synthesis at room temperature

Mahsa Shekarnoush, Francisco S. Aguirre-Tostado, Leunam Fernandez-Izquierdo and Manuel Quevedo Lopez

Journal of Solid State Chemistry, 2025, 348, 125341
DOI: 10.1016/j.jssc.2025.125341

On the Improved Mechanical Properties of Ball-Milled GNPs Reinforced Short Chain Branched-Polyethylene Nanocomposite: Micromechanical Modeling and Fractography Study

Dimitra Kourtidou, Konstantinos Tsongas, Maria-Eirini Grigora, Dimitrios Tzetzis, Dimitrios N. Bikiaris and Konstantinos Chrissafis

Applied Sciences, 2021, 11, 9420
DOI: 10.3390/app11209420

Solvent-Free, Mechanochemically Scalable Synthesis of 2,3-Dihydroquinazolin-4(1H)-one Using Brønsted Acid Catalyst

Gauravi Yashwantrao, Valmik P. Jejurkar, Rajpratap Kshatriya and Satyajit Saha

ACS Sustainable Chem. Eng., 2019, 7, 13551
DOI: 10.1021/acssuschemeng.9b03199

SAG mill ball diameter semi-theory based on pebble fracture strength and DEM validation

Yunxiao Li, Qingfei Xiao, Guobin Wang, Boyuan Sun, Chao Zheng, Saizhen Jin and Qingkai Wang

Minerals Engineering, 2025, 222, 109169
DOI: 10.1016/j.mineng.2024.109169

Temperature progression in a mixer ball mill

Robert Schmidt, H. Martin Scholze and Achim Stolle

Int J Ind Chem, 2016, 7, 181
DOI: 10.1007/s40090-016-0078-8

Priority and Prospect of Sulfide‐Based Solid‐Electrolyte Membrane

Hong Liu, Yuhao Liang, Chao Wang, Dabing Li, Xiaoqin Yan, Ce‐Wen Nan and Li‐Zhen Fan

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202206013

Nanostructured delivery systems in food: latest developments and potential future directions

Yoav D Livney

Current Opinion in Food Science, 2015, 3, 125
DOI: 10.1016/j.cofs.2015.06.010

A comparative study of direct and indirect evaluation of piezoelectric properties of electrophoreticaly deposited (Ba, Ca) (Zr, Ti)O3 lead-free piezoceramics

Daniel Drdlik, Dominik Zeman, Pavel Tofel, Zdenek Chlup, Hynek Hadraba and Katarina Drdlikova

Ceramics International, 2021, 47, 2034
DOI: 10.1016/j.ceramint.2020.09.035

Halide segregation to boost all-solid-state lithium-chalcogen batteries

Jieun Lee, Shiyuan Zhou, Victoria C. Ferrari, Chen Zhao, Angela Sun, Sarah Nicholas, Yuzi Liu, Chengjun Sun, Dominik Wierzbicki, Dilworth Y. Parkinson, Jianming Bai, Wenqian Xu, Yonghua Du, Khalil Amine and Gui-Liang Xu

Science, 2025, 388, 724
DOI: 10.1126/science.adt1882

A chemical milling process to produce water-based inkjet printing ink from waste tire carbon blacks

I-Feng Wu and Ying-Chih Liao

Waste Management, 2021, 122, 64
DOI: 10.1016/j.wasman.2020.12.041

Recycling of rare earths from lamp phosphor waste: Enhanced dissolution of LaPO 4 :Ce 3+ ,Tb 3+ by mechanical activation

Steff Van Loy, Koen Binnemans and Tom Van Gerven

Journal of Cleaner Production, 2017, 156, 226
DOI: 10.1016/j.jclepro.2017.03.160

Highly Efficient MAPbI3‐Based Quantum Dots Exhibiting Unusual Nonblinking Single Photon Emission at Room Temperature

Yung‐Tang Chuang, Tzu‐Yu Lin, Guang‐Hsun Tan, Pei‐En Jan, Hao‐Cheng Lin, Hung‐Ming Chen, Kai‐Yuan Hsiao, Bo‐Han Chen, Chih‐Hsuan Lu, Chi‐Hsuan Lee, Chun‐Wei Pao, Shang‐Da Yang, Ming‐Yen Lu and Hao‐Wu Lin

Small, 2024, 20
DOI: 10.1002/smll.202308676

Investigating particle morphology, quality, flowability and performance of abrasive-grinding based powders for directed energy deposition

Harish Singh Dhami and Koushik Viswanathan

Powder Technology, 2024, 437, 119533
DOI: 10.1016/j.powtec.2024.119533

Modification of the structural and functional properties of wheat gluten protein using a planetary ball mill

Ziqiao Liu, Zhi Zheng, Guobin Zhu, Shuizhong Luo, Danfeng Zhang, Fengru Liu and Yizhong Shen

Food Chemistry, 2021, 363, 130251
DOI: 10.1016/j.foodchem.2021.130251

Altering Product Selectivity by Mechanochemistry

José G. Hernández and Carsten Bolm

J. Org. Chem., 2017, 82, 4007
DOI: 10.1021/acs.joc.6b02887

Poly (vinylidene fluoride) solid polymer electrolyte structure revealed by secondary ion mass spectrometry

Sylwia Kozdra, Adrianna Wójcik, Małogrzata Możdżonek, Łukasz Florczak, Ireneusz Opaliński and Paweł Piotr Michałowski

Polymer, 2022, 259, 125364
DOI: 10.1016/j.polymer.2022.125364

Dual regulation of particle size and surface structure of SrVO3 for high volumetric capacity

Lin Tan, Lei Sun, Chunlong Dai, Zifeng Lin and Ying Liu

Ceramics International, 2024, 50, 26279
DOI: 10.1016/j.ceramint.2024.04.235

Enargite concentrate processing by the combination of mechanochemical, hydrometallurgical and precipitation methods

Zdenka Bujňáková,, Peter Baláž and Anna Zorkovská

International Journal of Mineral Processing, 2014, 127, 28
DOI: 10.1016/j.minpro.2013.12.008

Physical Synthesis and Study of Ag@CaF2 Core@Shell Nanoparticles: Morphology and Tuning of Optical Properties

Sergio D'Addato, Avinash Vikatakavi, Maria Chiara Spadaro, Sergio Valeri and Luca Pasquali

Physica Status Solidi (b), 2019, 256
DOI: 10.1002/pssb.201800507

Plumbagin Extraction: A Green Study

Fernanda I. Calzada-González, Joel Martínez, Yolanda M. Vargas-Rodríguez, Luis B. Hernández-Portilla, M. Inés Nicolás-Vázquez and René Miranda

Natural Product Communications, 2023, 18
DOI: 10.1177/1934578X231191345

A novel composite derived from carbonized hawthorn waste pulp/marble waste powder by ball milling: preparation, characterization, and usability as bifunctional adsorbent

Hamza Özkaraaslan, Seda Çetintaş and Deniz Bingöl

Biomass Conv. Bioref., 2023, 13, 3765
DOI: 10.1007/s13399-021-01412-1

Electro‐Mechanochemical Atom Transfer Radical Cyclizations using Piezoelectric BaTiO3

Christian Schumacher, José G. Hernández and Carsten Bolm

Angewandte Chemie, 2020, 132, 16499
DOI: 10.1002/ange.202003565

Overview of Electricity Transmission Conductors: Challenges and Remedies

Chika Oliver Ujah, Daramy Vandi Von Kallon and Victor Sunday Aigbodion

Materials, 2022, 15, 8094
DOI: 10.3390/ma15228094

Influence of surface active agent on the size of metal powder particles during their ball milling in a planetary mill

A E Chesnokov, A V Smirnov and T M Vidyuk

J. Phys.: Conf. Ser., 2019, 1404, 012011
DOI: 10.1088/1742-6596/1404/1/012011

Silicon Powder Properties Produced in a Planetary Ball Mill as a Function of Grinding Time, Grinding Bead Size and Rotational Speed

Benedicte Eikeland Nilssen and Rolf Arne Kleiv

Silicon, 2020, 12, 2413
DOI: 10.1007/s12633-019-00340-0

Numerical simulation of ball milling reactor for novel ammonia synthesis under ambient conditions

SalaiSargunan S Paramanantham, Boris Brigljević, Aleksey Ni, Vijay Mohan Nagulapati, Gao-Feng Han, Jong-Beom Baek, Hrvoje Mikulčić and Hankwon Lim

Energy, 2023, 263, 125754
DOI: 10.1016/j.energy.2022.125754

Efficient Conversion of Cellulose to Thermoplastics by Mechanochemical Esterification

De-Fa Hou, Meng-Lei Li, Pei-Yao Li, Ling Zhou, Kai Zhang, Zheng-Ying Liu, Wei Yang and Ming-Bo Yang

ACS Sustainable Chem. Eng., 2023, 11, 7655
DOI: 10.1021/acssuschemeng.2c07364

Influence of precursor ball milling in enhancing the structural, morphological, optical and electrical properties of AIZO thin films

Vinoth Kumar Jayaraman, Arturo Maldonado-Álvarez, Antonio E. Jimenez-Gonzalez and María de la Luz Olvera-Amador

Materials Letters, 2016, 181, 52
DOI: 10.1016/j.matlet.2016.06.007

Synthesis of bentonite-supported Fe(II) and heteropolyacid (HPW) composite through a mechanochemical processing

Guangtao Wei, Yunshang Li, Linye Zhang, Shuya Cai, Tong Zhu, Zhongmin Li and Jihua Mo

Applied Clay Science, 2018, 152, 342
DOI: 10.1016/j.clay.2017.11.035

Creating High Aspect Ratio Magnetostrictive Flakes to Enhance Magnetoelectric Polymer Composites

Andrew D. M. Charles, Andrew N. Rider, Sonya A. Brown and Chun H. Wang

ACS Appl. Electron. Mater., 2024, 6, 4560
DOI: 10.1021/acsaelm.4c00594

Advances in Solid-State Transformations of Coordination Bonds: From the Ball Mill to the Aging Chamber

Cristina Mottillo and Tomislav Friščić

Molecules, 2017, 22, 144
DOI: 10.3390/molecules22010144

Effect of mechanical activation on catalytic properties of Fe2O3-pillared bentonite for Fenton-like reaction

G.T. Wei, Y.S. Li, L.Y. Zhang, Z.M. Li, Y. Deng, L.H. Shao and J .H. Mo

Clay miner., 2017, 52, 439
DOI: 10.1180/claymin.2017.052.4.03

Enhancement in hydrogen sorption behaviour of MgH2 catalyzed by graphene quantum dots

Rashmi Kesarwani, Ashish Bhatnagar, Satish K. Verma, M. Sterlin Leo Hudson and M.A. Shaz

International Journal of Hydrogen Energy, 2024, 67, 1026
DOI: 10.1016/j.ijhydene.2024.01.160

Mechanochemical tuning of molecular weight distribution of styrene homopolymers as postpolymerization modification in solvent‐free solid‐state

Milton Jimenez‐Francisco, Jose Gonzalo Carrillo and Luis Alfonso Garcia‐Cerda

J of Applied Polymer Sci, 2021, 138
DOI: 10.1002/app.49628

Mechanocatalytic Depolymerization of Lignocellulose Performed on Hectogram and Kilogram Scales

Marcelo D. Kaufman Rechulski, Mats Käldström, Udo Richter, Ferdi Schüth and Roberto Rinaldi

Ind. Eng. Chem. Res., 2015, 54, 4581
DOI: 10.1021/acs.iecr.5b00224

Hydrophobic cellulose films with excellent strength and toughness via ball milling activated acylation of microfibrillated cellulose

Sha Deng, Rui Huang, Mi Zhou, Feng Chen and Qiang Fu

Carbohydrate Polymers, 2016, 154, 129
DOI: 10.1016/j.carbpol.2016.07.101

Activation of a Raw Clay by Mechanochemical Process—Effects of Various Parameters on the Process Efficiency and Cementitious Properties

Ilda Tole, Karin Habermehl-Cwirzen, Magdalena Rajczakowska and Andrzej Cwirzen

Materials, 2018, 11, 1860
DOI: 10.3390/ma11101860

Engineering Nanostructured Silicon and its Practical Applications in Lithium‐Ion Batteries: A Critical Review

Xuefan Zhang, Hebang Shi, Pengpeng Lv, Jinyun Liu and Huigang Zhang

Energy Tech, 2021, 9
DOI: 10.1002/ente.202100400

Effect of Catalyst Ink Properties on the Performance of Proton Exchange Membrane Fuel Cell and Water Electrolyzer: A Mini Review

Won-Jong Choi, Inku Kang, Duk Man Yu, Sang Jun Yoon, Soonyong So and Keun-Hwan Oh

Korean J. Chem. Eng., 2024
DOI: 10.1007/s11814-024-00221-2

The many flavours of mechanochemistry and its plausible conceptual underpinnings

Robert T. O’Neill and Roman Boulatov

Nat Rev Chem, 2021, 5, 148
DOI: 10.1038/s41570-020-00249-y

Integrating solvent-free mechanochemistry and heat curing for the green production of highly charged and highly crystalline phosphorylated cellulose nanocrystals

Xue Gao, Lei Zhang, Mei Cui, Wei Qi, Hon Loong Lam, Renliang Huang and Rongxin Su

Chemical Engineering Journal, 2025, 511, 162260
DOI: 10.1016/j.cej.2025.162260

Effect of Reaction Parameters on the Synthesis of 5-Arylidene Barbituric Acid Derivatives in Ball Mills

Robert Schmidt, Christine F. Burmeister, Matej Baláž, Arno Kwade and Achim Stolle

Org. Process Res. Dev., 2015, 19, 427
DOI: 10.1021/op5003787

Mechanochemistry: A Force of Synthesis

Jean-Louis Do and Tomislav Friščić

ACS Cent. Sci., 2017, 3, 13
DOI: 10.1021/acscentsci.6b00277

Outstanding Advantages, Current Drawbacks, and Significant Recent Developments in Mechanochemistry: A Perspective View

Silvina Pagola

Crystals, 2023, 13, 124
DOI: 10.3390/cryst13010124

Analysis of paramagnetic point defects in finely ground particles of natural quartz using ionizing radiation and EPR spectroscopy

Pedro L. Guzzo, Maria Júlia S. Luis, Bruno R. Soares and Filipe B. Marinho de Barros

Radiation Effects and Defects in Solids, 2025, 180, 16
DOI: 10.1080/10420150.2025.2474957

Effects of Silicon Addition on Physical and Mechanical Properties of W, W–Ni, and W–Ni–Co Alloys Fabricated by Powder Metallurgy

Vadla Suman, Ram Sajeevan Maurya, Mayadhar Debata and Debasis Chaira

Adv Eng Mater, 2025, 27
DOI: 10.1002/adem.202400831

Mechanochemical Oxidative Mannich Reaction: Evaluation of Chemical and Mechanical Parameters for the Mild and Chemoselective Coupling of N‐tert‐butoxycarbonyltetrahydroquinolines and Ketones

Jing‐Bo Yu, Gang Peng, Zhi‐Jiang Jiang, Zi‐Kun Hong and Wei‐Ke Su

Eur J Org Chem, 2016, 2016, 5340
DOI: 10.1002/ejoc.201600987

Mechanochemical synthesis and structural evaluation of a metastable polymorph of Ti3Sn

Eva M. Heppke, Aylin Koldemir, Rainer Pöttgen, Thomas Bredow and Martin Lerch

Zeitschrift für Naturforschung B, 2023, 78, 209
DOI: 10.1515/znb-2023-0309

How to Design Hydrogen Storage Materials? Fundamentals, Synthesis, and Storage Tanks

Qiwen Lai, Yahui Sun, Ting Wang, Poojan Modi, Claudio Cazorla, Umit B. Demirci, Jose Ramon Ares Fernandez, Fabrice Leardini and Kondo‐François Aguey‐Zinsou

Advanced Sustainable Systems, 2019, 3
DOI: 10.1002/adsu.201900043

Formation of protein oleogels via capillary attraction of engineered protein particles

Gao-Shang Wang, Hong-Yu Chen, Li-Juan Wang, Yuan Zou, Zhi-Li Wan and Xiao-Quan Yang

Food Hydrocolloids, 2022, 133, 107912
DOI: 10.1016/j.foodhyd.2022.107912

Recent Progress in Materials Design and Fabrication Techniques for Membrane Electrode Assembly in Proton Exchange Membrane Fuel Cells

Xinhai Deng, Liying Ma, Chao Wang, Hao Ye, Lin Cao, Xinxing Zhan, Juan Tian and Xin Tong

Catalysts, 2025, 15, 74
DOI: 10.3390/catal15010074

Main group mechanochemistry

Agota A Gečiauskaitė and Felipe García

Beilstein J. Org. Chem., 2017, 13, 2068
DOI: 10.3762/bjoc.13.204

Analysis of Charge Carrier Transport Toward Optimized Cathode Composites for All‐Solid‐State Li−S Batteries

Georg F. Dewald, Saneyuki Ohno, Joachim G. C. Hering, Jürgen Janek and Wolfgang G. Zeier

Batteries & Supercaps, 2021, 4, 183
DOI: 10.1002/batt.202000194

Mechanochemical Ruthenium-Catalyzed Olefin Metathesis

Jean-Louis Do, Cristina Mottillo, Davin Tan, Vjekoslav Štrukil and Tomislav Friščić

J. Am. Chem. Soc., 2015, 137, 2476
DOI: 10.1021/jacs.5b00151

Crystallite size and phase purity in Pb 1-x Sr x TiO 3 ferroelectric perovskites for biomedical applications via controlled sintering

Rahmat Doni Widodo, Samsudin Anis, Deni Fajar Fitriyana, Maykel Manawan, Joni Sah, Aji Santiko, Rizalman Bin Mamat, Abdulfatah Abdu Yusuf and Muhammad Imam Ammarullah

Journal of Asian Ceramic Societies, 2024, 12, 332
DOI: 10.1080/21870764.2024.2421046

Mechanochemical Synthesis of Recyclable Biohybrid Polymer Networks Using Whole Biomass

Meng Jiang, Emily Bird, Woojung Ham and Joshua C. Worch

Angewandte Chemie, 2025
DOI: 10.1002/ange.202510449

Comprehensive Study of the Organic‐Solvent‐Free CDI‐Mediated Acylation of Various Nucleophiles by Mechanochemistry

Thomas‐Xavier Métro, Julien Bonnamour, Thomas Reidon, Anthony Duprez, Jordi Sarpoulet, Jean Martinez and Frédéric Lamaty

Chemistry A European J, 2015, 21, 12787
DOI: 10.1002/chem.201501325

Direct acid-catalysed mechanical depolymerisation of fibre sludge to reducing sugars using planetary milling

Yue Dong, Laura Schneider, Tao Hu, Mari Jaakkola, Jana Holm, Jean Marc Leveque and Ulla Lassi

Biomass and Bioenergy, 2016, 86, 36
DOI: 10.1016/j.biombioe.2016.01.006

Ball milling as an important pretreatment technique in lignocellulose biorefineries: a review

Yalew Woldeamanuel Sitotaw, Nigus G. Habtu, Abaynesh Yihdego Gebreyohannes, Suzana P. Nunes and Tom Van Gerven

Biomass Conv. Bioref., 2023, 13, 15593
DOI: 10.1007/s13399-021-01800-7

Particle size reduction technique for NaCl crystals as effective and applicable strategy for saltiness enhancement in solid foods

Lulu Zhang, Zeyao Qiao, Shiqi Liu, Jiajie Wang and Chao Ma

LWT, 2024, 191, 115655
DOI: 10.1016/j.lwt.2023.115655

Dispersion characteristics, interfacial bonding and nanostructural evolution of MWCNT in Ti6Al4V powders prepared by shift speed ball milling technique

Avwerosuoghene Moses Okoro, Ronald Machaka, Senzeni Sipho Lephuthing, Mary Ajimegoh Awotunde, Samuel Ranti Oke, Oluwasegun Eso Falodun and Peter Apata Olubambi

Journal of Alloys and Compounds, 2019, 785, 356
DOI: 10.1016/j.jallcom.2019.01.174

Comminution technologies in the pharmaceutical industry: a comprehensive review with recent advances

André Ribeiro, Frederico Montes, João Sousa and Alberto Pais

Reviews in Chemical Engineering, 2025, 41, 69
DOI: 10.1515/revce-2024-0059

Adsorption of modified polystyrene nanoplastics on biomass-derived activated carbons: A study of ball mill activation

Eva Sanz-Santos, Ariadna Álvarez-Montero, Almudena Gómez-Avilés, Carolina Belver and Jorge Bedia

Journal of Environmental Management, 2025, 391, 126654
DOI: 10.1016/j.jenvman.2025.126654

Environmentally Friendly Water-Based Carbon Slurry with Carboxylated Carbon Nanosheets for Optimizing the Electrode–Collector Interface in Lithium-Ion Batteries

Shuiping Zhong, Hongyu Liu, Lei Yang, Wei Weng and Wen Tan

ACS Appl. Mater. Interfaces, 2025, 17, 10593
DOI: 10.1021/acsami.4c17433

Impact of the rate of input of specific energy on the ball milling of aluminium in a planetary mill

A E Chesnokov, A V Smirnov and T M Vidyuk

J. Phys.: Conf. Ser., 2019, 1404, 012012
DOI: 10.1088/1742-6596/1404/1/012012

In-situ synthesis and superhigh modulus of network structured TiC/Ti composites based on diamond-Ti system

Fengbo Sun, Lujun Huang, Rui Zhang, Shuai Wang, Shang Jiang, Yuan Sun, Qi An, Yang Jiao and Lin Geng

Journal of Alloys and Compounds, 2020, 834, 155248
DOI: 10.1016/j.jallcom.2020.155248

Processing and Investigation Methods in Mechanochemical Kinetics

Evelina Colacino, Maria Carta, Giorgio Pia, Andrea Porcheddu, Pier Carlo Ricci and Francesco Delogu

ACS Omega, 2018, 3, 9196
DOI: 10.1021/acsomega.8b01431

Utilization of the Drug–Polymer Solid Dispersion Obtained by Ball Milling as a Taste Masking Method in the Development of Orodispersible Minitablets with Hydrocortisone in Pediatric Doses

Monika Trofimiuk, Katarzyna Olechno, Emil Trofimiuk, Anna Czajkowska-Kośnik, Patrycja Ciosek-Skibińska, Klaudia Głowacz, Joanna Lenik, Anna Basa, Halina Car and Katarzyna Winnicka

Pharmaceutics, 2024, 16, 1041
DOI: 10.3390/pharmaceutics16081041

Green and Red Photoluminescent Manganese Bromides with Aminomethylpyridine Isomers

Myung-Ho Choi, Tae Hwan Moon, Yunseung Kuk and Kang Min Ok

Inorg. Chem., 2023, 62, 12058
DOI: 10.1021/acs.inorgchem.3c01573

Hydrolysis enhancing mechanisms of Mg-based alloys/hydrides from perspectives: Electrochemical corrosion, active sites, mass transfer, and kinetics

Chaoling Wu, Qin Huang, Bingshou Gong, Ji Zhou, Guanghui Xia, Fangnan He, Yao Wang, Yigang Yan and Yungui Chen

Journal of Materials Science & Technology, 2023, 163, 1
DOI: 10.1016/j.jmst.2023.03.044

Torrefied Biomass as an Alternative in Coal-Fueled Power Plants: A Case Study on Grindability of Agroforestry Waste Forms

Leonel J. R. Nunes

Clean Technol., 2020, 2, 270
DOI: 10.3390/cleantechnol2030018

Natural mineral drugs inspired functional nanomaterials: design, synthesis, and biomedical applications

Yefan Duan, Xuerong Ding, Elizat Ablikim, Otkuer Rahman, Zihan Guo, Qihang Li, Zixiang Xia, Shujie Lu, Lei Wang and Jianfei Sun

J Am Ceram Soc., 2025
DOI: 10.1111/jace.20625

The effect of surfactants (heptane/toluene) for the process of grinding Al and Mg powders in a high-energy spherical planetary mill

Valeriya V. Aksenova, Ivan N. Burnyshev and Vladimir I. Lad’yanov

CPM, 2024, 26, 520
DOI: 10.62669/17270227.2024.4.44

Amelioration of tableting properties and dissolution rate of naproxen co-grinded with nicotinamide: preparation and characterization of co-grinded mixture

Nosheen Khizar, Nasir Abbas, Mahmood Ahmed, Muhammad Ahmad, Zeeshan Mustafa, Muhammad Jehangir, Khairia Mohammed Al-Ahmary, Amjad Hussain, Nadeem Irfan Bukhari and Ijaz Ali

Drug Development and Industrial Pharmacy, 2024, 50, 537
DOI: 10.1080/03639045.2024.2358356

Mechanochemistry for the Synthesis of a Sustainable Phosphorus/Potassium Tannic Acid Flame-Retardant Additive and Its Application in Polypropylene

M. Aaddouz, F. Laoutid, J. Mariage, B. Yada, A. Toncheva, J. Lazko, K. Azzaoui, R. Sabbahi, E. Mejdoubi, M. R. Saeb and Ph Dubois

ACS Sustainable Chem. Eng., 2025, 13, 1450
DOI: 10.1021/acssuschemeng.4c04952

Mechanochemical remediation of contaminated soil: A review

Xiwang Zhao, Xitao Liu, Zhenguo Zhang, Wenbo Ren, Chunye Lin, Mengchang He and Wei Ouyang

Science of The Total Environment, 2024, 946, 174117
DOI: 10.1016/j.scitotenv.2024.174117

Efficient Synthesis of Alkali Borohydrides from Mechanochemical Reduction of Borates Using Magnesium–Aluminum-Based Waste

Thi Thu Le, Claudio Pistidda, Julián Puszkiel, Chiara Milanese, Sebastiano Garroni, Thomas Emmler, Giovanni Capurso, Gökhan Gizer, Thomas Klassen and Martin Dornheim

Metals, 2019, 9, 1061
DOI: 10.3390/met9101061

Dry grinding in planetary ball mills: Evaluation of a stressing model

Christine Burmeister, Larissa Titscher, Sandra Breitung-Faes and Arno Kwade

Advanced Powder Technology, 2018, 29, 191
DOI: 10.1016/j.apt.2017.11.001

Mechanochemical capture of organic bromine from hexabromocyclododecane (HBCD) and simultaneous selective lithium extraction from NCM cathode based on e-waste

Ping Zhu, Weidong Li, Haoran Jiang and Lingen Zhang

Chemical Engineering Journal, 2025, 506, 160092
DOI: 10.1016/j.cej.2025.160092

Mechanochemical green synthesis of hyper-crosslinked cyclodextrin polymers

Alberto Rubin Pedrazzo, Fabrizio Caldera, Marco Zanetti, Silvia Lucia Appleton, Nilesh Kumar Dhakar and Francesco Trotta

Beilstein J. Org. Chem., 2020, 16, 1554
DOI: 10.3762/bjoc.16.127

Experimentelle Parameterstudie zur Trockenzerkleinerung in Planetenkugelmühlen

Larissa Titscher, Sandra Breitung‐Faes and Arno Kwade

Chemie Ingenieur Technik, 2016, 88, 1524
DOI: 10.1002/cite.201600036

Studies of the Reactivity of Graphene Driven by Mechanical Distortions

Nathaniel Hawthorne, Sayan Banerjee, Quentarius Moore, Andrew M. Rappe and James D. Batteas

J. Phys. Chem. C, 2022, 126, 17569
DOI: 10.1021/acs.jpcc.2c05261

Mechanochemical Pretreatment for Efficient Solvent‐Free Synthesis of SSZ‐13 Zeolite

Veronika Pashkova, Kinga Mlekodaj, Petr Klein, Libor Brabec, Radek Zouzelka, Jiri Rathousky, Venceslava Tokarova and Jiri Dedecek

Chemistry A European J, 2019, 25, 12068
DOI: 10.1002/chem.201902107

Progress of Flake Powder Metallurgy Research

Behzad Sadeghi and Pasquale Cavaliere

Metals, 2021, 11, 931
DOI: 10.3390/met11060931

Pt/TiO2 Prepared by Mechanochemistry Boosts Photocatalytic Production of Hydrogen

Asier Agrelo‐Lestón, Lluís Soler and Jordi Llorca

ChemCatChem, 2025, 17
DOI: 10.1002/cctc.202500538