Tribological behavior of differently deposited Al-Si layer in the improvement of Inconel 718 machinability

Saharnaz Montazeri, Maryam Aramesh, Abul Fazal M. Arif and Stephen C. Veldhuis

Int J Adv Manuf Technol, 2019, 105, 1245
DOI: 10.1007/s00170-019-04281-1

Advanced characterization methods for wear resistant hard coatings: A review on recent progress

Michael Tkadletz, Nina Schalk, Rostislav Daniel, Jozef Keckes, Christoph Czettl and Christian Mitterer

Surface and Coatings Technology, 2016, 285, 31
DOI: 10.1016/j.surfcoat.2015.11.016

Characterization and machining performance of a chipping resistant ultra-soft coating used for the machining of Inconel 718

Saharnaz Montazeri, Maryam Aramesh, Sushant Rawal and Stephen C. Veldhuis

Wear, 2021, 474-475, 203759
DOI: 10.1016/j.wear.2021.203759

Development of High Temperature Nanoindentation Methodology and its Application in the Nanoindentation of Polycrystalline Tungsten in Vacuum to 950 °C

A. J. Harris, B. D. Beake, D. E. J. Armstrong and M. I. Davies

Exp Mech, 2017, 57, 1115
DOI: 10.1007/s11340-016-0209-3

Nano-scratch testing of (Ti,Fe)N x thin films on silicon

B.D. Beake, V.M. Vishnyakov and A.J. Harris

Surface and Coatings Technology, 2017, 309, 671
DOI: 10.1016/j.surfcoat.2016.11.024

Effects of thermal treatment on the electrical behavior of titanium dioxide thin-films

Ely Dannier V-Niño, Linda Bertel and David A. Miranda

emergent mater., 2024, 7, 2025
DOI: 10.1007/s42247-024-00694-1

Nanoindentation of chemical-vapor deposited Al2O3 hard coatings at elevated temperatures

Marisa Rebelo de Figueiredo, Manuel D. Abad, Adrian J. Harris, Christoph Czettl, Christian Mitterer and Peter Hosemann

Thin Solid Films, 2015, 578, 20
DOI: 10.1016/j.tsf.2015.01.069

Improvement of Wear Performance of Nano-Multilayer PVD Coatings under Dry Hard End Milling Conditions Based on Their Architectural Development

Shahereen Chowdhury, Ben D. Beake, Kenji Yamamoto, Bipasha Bose, Myriam Aguirre, German S. Fox-Rabinovich and Stephen C. Veldhuis

Coatings, 2018, 8, 59
DOI: 10.3390/coatings8020059

Progress in high temperature nanomechanical testing of coatings for optimising their performance in high speed machining

B.D. Beake and G.S. Fox-Rabinovich

Surface and Coatings Technology, 2014, 255, 102
DOI: 10.1016/j.surfcoat.2014.02.062

The use of tool materials for monitoring the state of cutting technological systems

В. Ya. Mokritskiy and V. Yu. Shelkovnikov

jour, 2021, 25, 17
DOI: 10.21285/1814-3520-2021-1-17-30

Tribofilm Formation As a Result of Complex Interaction at the Tool/Chip Interface during Cutting

German Fox-Rabinovich, Iosif Gershman, Mohamed Hakim, Mohamed Shalaby, James Krzanowski and Stephen Veldhuis

Lubricants, 2014, 2, 113
DOI: 10.3390/lubricants2030113

High temperature behavior of nanolayered CrAlTiN coating: Thermal stability, oxidation, and tribological properties

Tomas Polcar and Albano Cavaleiro

Surface and Coatings Technology, 2014, 257, 70
DOI: 10.1016/j.surfcoat.2014.07.053

Spatio-temporal behaviour of atomic-scale tribo-ceramic films in adaptive surface engineered nano-materials

G. Fox-Rabinovich, A. Kovalev, S. Veldhuis, K. Yamamoto, J. L. Endrino, I. S. Gershman, A. Rashkovskiy, M. H. Aguirre and D. L. Wainstein

Sci Rep, 2015, 5
DOI: 10.1038/srep08780

Effect of the Adaptive Response on the Wear Behavior of PVD and CVD Coated Cutting Tools during Machining with Built Up Edge Formation

German Fox-Rabinovich, Iosif S. Gershman, Kenji Yamamoto, Julia Dosbaeva and Stephen Veldhuis

Nanomaterials, 2020, 10, 2489
DOI: 10.3390/nano10122489

Hierarchical adaptive nanostructured PVD coatings for extreme tribological applications: the quest for nonequilibrium states and emergent behavior

German S Fox-Rabinovich, Kenji Yamamoto, Ben D Beake, Iosif S Gershman, Anatoly I Kovalev, Stephen C Veldhuis, Myriam H. Aguirre, Goulnara Dosbaeva and Jose L Endrino

Science and Technology of Advanced Materials, 2012, 13, 043001
DOI: 10.1088/1468-6996/13/4/043001

Effect of doping elements to hydrogen-free amorphous carbon coatings on structure and mechanical properties with special focus on crack resistance

Martin Zawischa, Volker Weihnacht, Jörg Kaspar and Martina Zimmermann

Materials Science and Engineering: A, 2022, 857, 144086
DOI: 10.1016/j.msea.2022.144086

Elevated temperature repetitive micro-scratch testing of AlCrN, TiAlN and AlTiN PVD coatings

B.D. Beake, J.L. Endrino, C. Kimpton, G.S. Fox-Rabinovich and S.C. Veldhuis

International Journal of Refractory Metals and Hard Materials, 2017, 69, 215
DOI: 10.1016/j.ijrmhm.2017.08.017

Comparison of fracture properties of different amorphous carbon coatings using the scratch test and indentation failure method

Martin Zawischa, Stefan Makowski, Martin Kuczyk and Volker Weihnacht

Surface and Coatings Technology, 2022, 435, 128247
DOI: 10.1016/j.surfcoat.2022.128247

Development of DLC coating architectures for demanding functional surface applications through nano- and micro-mechanical testing

B.D. Beake, T.W. Liskiewicz, V.M. Vishnyakov and M.I. Davies

Surface and Coatings Technology, 2015, 284, 334
DOI: 10.1016/j.surfcoat.2015.05.050

Tribo-films control in adaptive TiAlCrSiYN/TiAlCrN multilayer PVD coating by accelerating the initial machining conditions

Junfeng Yuan, Kenji Yamamoto, Danielle Covelli, Mohammed Tauhiduzzaman, Taib Arif, Iosif S. Gershman, Stephen C. Veldhuis and German S. Fox-Rabinovich

Surface and Coatings Technology, 2016, 294, 54
DOI: 10.1016/j.surfcoat.2016.02.041

The Role of Innovative Nanomechanical Test Techniques in Designing More Durable, Adaptive and Multifunctional Coatings

Ben D. Beake

Procedia CIRP, 2014, 22, 268
DOI: 10.1016/j.procir.2014.06.150

Load sensitivity in repetitive nano-impact testing of TiN and AlTiN coatings

Jian Chen, Heng Li and Ben D. Beake

Surface and Coatings Technology, 2016, 308, 289
DOI: 10.1016/j.surfcoat.2016.05.094

Two-component end mills with multilayer composite nano-structured coatings as a viable alternative to monolithic carbide end mills

Alexey Vereschaka, Boris Mokritskii, Elena Mokritskaya, Oleg Sharipov, Maksim Oganyan and Sergey N. Grigoriev

Mechanics & Industry, 2017, 18, 705
DOI: 10.1051/meca/2017052