Tuning the surface microstructure and gradient properties of polymers with photopolymerizable polysiloxane-modified nanogels

Cong Chen, JianCheng Liu, Fang Sun and Jeffrey W. Stansbury

RSC Adv., 2014, 4, 28928
DOI: 10.1039/C4RA02176B

Closed-cell and open-cell porous polymers from ionomer-stabilized high internal phase emulsions

Tao Zhang, Zhiguang Xu and Qipeng Guo

Polym. Chem., 2016, 7, 7469
DOI: 10.1039/C6PY01725H

Numerical Investigation of Heat Transfer Enhancement Inside the Pipes Filled With Radial Pore-Size Gradient Porous Materials

Peiyong Ma, Baogang Wang, Shuilin Chen, Xianwen Zhang, Changfa Tao and Xianjun Xing

Journal of Thermal Science and Engineering Applications, 2018, 10
DOI: 10.1115/1.4040276

Functionally Gradient Macroporous Polymers: Emulsion Templating Offers Control over Density, Pore Morphology, and Composition

Yufeng Xu, Le Tang, Chanokporn Nok-iangthong, Markus Wagner, Georg Baumann, Florian Feist, Alexander Bismarck and Qixiang Jiang

ACS Appl. Polym. Mater., 2024, 6, 5150
DOI: 10.1021/acsapm.4c00261

Fabrication of luminescent and macroporous Y2O3:Eu3+-coated silica monoliths via freeze drying

Yulei Wei, Lei Qian, Lu Lu and Runhua Fan

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2014, 441, 481
DOI: 10.1016/j.colsurfa.2013.10.008

Putting a New Spin on It: Gradient Centrifugation for Analytical and Preparative Applications

Andreas Spinnrock and Helmut Cölfen

Chemistry A European J, 2019, 25, 10026
DOI: 10.1002/chem.201900974

Achievement of wall temperature uniformity by axially graded porous materials

Xiaohui Bai, Zihao Zheng, Cunliang Liu and Akira Nakayama

International Journal of Heat and Mass Transfer, 2022, 197, 123335
DOI: 10.1016/j.ijheatmasstransfer.2022.123335

Air permeability and tensile properties of novel micron-scale gradient porous plates fabricated by rolling and vacuum sintering

Chaozhong Li and Zhaoyao Zhou

Powder Technology, 2022, 399, 117205
DOI: 10.1016/j.powtec.2022.117205

Fundamentals and Design‐Led Synthesis of Emulsion‐Templated Porous Materials for Environmental Applications

Muhammad Ahmad Mudassir, Hafiz Zohaib Aslam, Tariq Mahmood Ansari, Haifei Zhang and Irshad Hussain

Advanced Science, 2021, 8
DOI: 10.1002/advs.202102540

Fabrication of graded porous structure of hydroxypropyl cellulose hydrogels via temperature-induced phase separation

Alexia Tialiou, Zahraa H. Athab, Robert T. Woodward, Veronika Biegler, Bernhard K. Keppler, Ahmed F. Halbus, Michael R. Reithofer and Jia Min Chin

Carbohydrate Polymers, 2023, 315, 120984
DOI: 10.1016/j.carbpol.2023.120984

Design and characterization of isothermal chambers filled with gradient-porous materials

Baicun WANG, Liang WANG, Jiayi WU, Yifeng HONG, Xiaohui YAN, Hao GONG and Zhongbin XU

JTST, 2017, 12, JTST0008
DOI: 10.1299/jtst.2017jtst0008

Continuous Gradient Nanoporous Film Enabled by Delayed Directional Diffusion of Solvent and Selective Swelling

Di Tan, Qian Li, Baisong Yang, Xin Wang, Shiqi Hu, Zhengzhi Wang, Yifeng Lei and Longjian Xue

Langmuir, 2019, 35, 5864
DOI: 10.1021/acs.langmuir.9b00328

Creating Directionality in Nanoporous Carbon Materials: Adjustable Combinations of Structural and Chemical Gradients

Jochen Bahner, Nele Klinkenberg, Marvin Frisch, Lilly Brauchle and Sebastian Polarz

Adv Funct Materials, 2019, 29
DOI: 10.1002/adfm.201904058

Properties of gradient polyimide aerogels prepared through layer‐by‐layer assembly

Shuaiwei Yuan, Zhi Yu, Peng Wu, Shengtai Zhou, Huawei Zou and Pengbo Liu

Polymer Engineering & Sci, 2020, 60, 2292
DOI: 10.1002/pen.25472

Nanophotonic porous structures for passive daytime radiative cooling

Xupei Yao, Liao Huang, Yingjian Chen, Yaoxin Hu, Kwesi Sagoe-Crentsil and Wenhui Duan

Materials & Design, 2024, 245, 113256
DOI: 10.1016/j.matdes.2024.113256

Biomimetic Gradient Polymers with Enhanced Damping Capacities

Dong Wang, Huan Zhang, Jing Guo, Beichen Cheng, Yuan Cao, Shengjun Lu, Ning Zhao and Jian Xu

Macromol. Rapid Commun., 2016, 37, 655
DOI: 10.1002/marc.201500637

Constructing Porous Carbon Nanomaterials using Redox-Induced Low Molecular Weight Hydrogels and their Application as Supercapacitors

Hongtao Xie, Jide Wang and Wei Wang

ChemistrySelect, 2017, 2, 9330
DOI: 10.1002/slct.201701702

Large Continuous Mechanical Gradient Formation via Metal–Ligand Interactions

James A. Neal, Nathan J. Oldenhuis, Andrea L. Novitsky, Emil M. Samson, William J. Thrift, Regina Ragan and Zhibin Guan

Angew Chem Int Ed, 2017, 56, 15575
DOI: 10.1002/anie.201707587

Light-switchable emulsions: From reversible emulsification-demulsification to controllable microreactors

Liufang Zhao, Xiaoqing Yuan, Huiyong Wang, Yuanchao Pei, Yunlei Shi, Yuling Zhao, Yang Zhao and Zhiyong Li

Journal of Molecular Liquids, 2023, 372, 121166
DOI: 10.1016/j.molliq.2022.121166

Large Continuous Mechanical Gradient Formation via Metal–Ligand Interactions

James A. Neal, Nathan J. Oldenhuis, Andrea L. Novitsky, Emil M. Samson, William J. Thrift, Regina Ragan and Zhibin Guan

Angewandte Chemie, 2017, 129, 15781
DOI: 10.1002/ange.201707587

Emulsion and Foam Templating—Promising Routes to Tailor‐Made Porous Polymers

Cosima Stubenrauch, Angelika Menner, Alexander Bismarck and Wiebke Drenckhan

Angew Chem Int Ed, 2018, 57, 10024
DOI: 10.1002/anie.201801466

Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials

Baicun Wang, Yifeng Hong, Xiangtao Hou, Zhongbin Xu, Pengfei Wang, Xudong Fang and Xiaodong Ruan

Energy Conversion and Management, 2015, 105, 206
DOI: 10.1016/j.enconman.2015.07.064

Emulsions‐ und Schaumtemplatierung – vielversprechende Methoden zur Herstellung maßgeschneiderter poröser Polymere

Cosima Stubenrauch, Angelika Menner, Alexander Bismarck and Wiebke Drenckhan

Angewandte Chemie, 2018, 130, 10176
DOI: 10.1002/ange.201801466

3D‐Printing of Functionally Graded Porous Materials Using On‐Demand Reconfigurable Microfluidics

Marco Costantini, Jakub Jaroszewicz, Łukasz Kozoń, Karol Szlązak, Wojciech Święszkowski, Piotr Garstecki, Cosima Stubenrauch, Andrea Barbetta and Jan Guzowski

Angew Chem Int Ed, 2019, 58, 7620
DOI: 10.1002/anie.201900530

3D‐Printing of Functionally Graded Porous Materials Using On‐Demand Reconfigurable Microfluidics

Marco Costantini, Jakub Jaroszewicz, Łukasz Kozoń, Karol Szlązak, Wojciech Święszkowski, Piotr Garstecki, Cosima Stubenrauch, Andrea Barbetta and Jan Guzowski

Angewandte Chemie, 2019, 131, 7702
DOI: 10.1002/ange.201900530