Formation of 3D graphene–Ni foam heterostructures with enhanced performance and durability for bipolar plates in a polymer electrolyte membrane fuel cell

Yeoseon Sim, Jinsung Kwak, Se-Yang Kim, Yongsu Jo, Seunghyun Kim, Sung Youb Kim, Ji Hyun Kim, Chi-Seung Lee, Jang Ho Jo and Soon-Yong Kwon

J. Mater. Chem. A, 2018, 6, 1504
DOI: 10.1039/C7TA07598G

Polypropylene-grafted multi-walled carbon nanotube reinforced polypropylene composite bipolar plates in polymer electrolyte membrane fuel cells

Min-Chien Hsiao, Shu-Hang Liao, Yu-Feng Lin, Cheng-Chih Weng, Han Min Tsai, Chen-Chi M. Ma, Shie-Heng Lee, Ming-Yu Yen and Po-I Liu

Energy Environ. Sci., 2011, 4, 543
DOI: 10.1039/C0EE00057D

Solutions to the water flooding problem for unitized regenerative fuel cells: status and perspectives

Immanuel Vincent, Eun-Chong Lee and Hyung-Man Kim

RSC Adv., 2020, 10, 16844
DOI: 10.1039/D0RA00434K

Improving sulfur tolerance of noble metal catalysts by tungsten oxide-induced effects

Ran Xu, Feng Xu, Mu Pan and Shichun Mu

RSC Adv., 2013, 3, 764
DOI: 10.1039/C2RA21989A

Preparation and properties of a graphene reinforced nanocomposite conducting plate

Min-Chien Hsiao, Shu-Hang Liao, Ming-Yu Yen, Chih-Chun Teng, Shie-Heng Lee, Nen-Wen Pu, Chung-An Wang, Yuh Sung, Ming-Der Ger, Chen-Chi M. Ma and Min-Hsuan Hsiao

J. Mater. Chem., 2010, 20, 8496
DOI: 10.1039/c0jm01679a

Independent control of water retention and acid–base pairing through double-shelled microcapsules to confer membranes with enhanced proton conduction under low humidity

Jingtao Wang, Zizhuo Zhang, Xiujun Yue, Lingli Nie, Guangwei He, Hong Wu and Zhongyi Jiang

J. Mater. Chem. A, 2013, 1, 2267
DOI: 10.1039/C2TA00186A

Electrochemical reduction of high-efficiency ozone generation through nitrogen-doped diamond-like carbon electrodes

Liang-Chien Cheng, Tai-Feng Hung, Po-Han Lee, I-Chiao Lin, Hsiu-Li Wen, Ling-Hui Lu, Chun-Lung Chiu, Shis-Chang Chen, James C. Sung, Biing-Jyh Weng and Ru-Shi Liu

RSC Adv., 2013, 3, 5917
DOI: 10.1039/c3ra23335a

Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments

L. Wang, D.O. Northwood, X. Nie, J. Housden, E. Spain, A. Leyland and A. Matthews

Journal of Power Sources, 2010, 195, 3814
DOI: 10.1016/j.jpowsour.2009.12.127

Improvement Corrosion Resistance and Surface Modification of Cral Binary Alloy Coating on Stainless Steel as Bipolar Plates for Proton Exchange Membrane Fuel Cells

Ha Eun Kang, Ji Hyeok Choi, Unho Lee, Hyun-Gil Kim and Young Soo Yoon

SSRN Journal, 2022
DOI: 10.2139/ssrn.4050389

Identification of mechanical responses of steel sheets under non-proportional loadings using dislocation-density based crystal plasticity model

Hyuk Jong Bong, Jinwoo Lee, Myoung-Gyu Lee and Daeyong Kim

International Journal of Mechanical Sciences, 2019, 155, 461
DOI: 10.1016/j.ijmecsci.2019.03.025

Conversion Coating Used in Bipolar Plates in PEMFCs

Te-Yuan Chiang, Ay-Su, Lin-Chang Tsai, Hung-Hua Sheu and Chen-En Lu

International Journal of Electrochemical Science, 2014, 9, 5850
DOI: 10.1016/S1452-3981(23)10853-4

Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC

Jiefu Shi, Pengchao Zhang, Yuetong Han, Hongyu Wang, Xinyu Wang, Yingshui Yu and Juncai Sun

International Journal of Hydrogen Energy, 2020, 45, 10050
DOI: 10.1016/j.ijhydene.2020.01.203

Microstructure and property of multilayer TiN/TiCN nanocrystalline coating used for metal bipolar plate

Z.J. Wu, R.L. Liu, Z.H. Liu, X.Y. Wu and F.L. Li

Vacuum, 2024, 227, 113361
DOI: 10.1016/j.vacuum.2024.113361

Exploring PANI-TiN Nanoparticle Coatings in a PEFC Environment: Enhancing Corrosion Resistance and Conductivity of Stainless Steel Bipolar Plates

Surbhi Sharma, Kun Zhang, Gaurav Gupta and Daniel Santamaria

Energies, 2017, 10, 1152
DOI: 10.3390/en10081152

A review of proton exchange membrane water electrolysis on degradation mechanisms and mitigation strategies

Qi Feng, Xiao−Zi Yuan, Gaoyang Liu, Bing Wei, Zhen Zhang, Hui Li and Haijiang Wang

Journal of Power Sources, 2017, 366, 33
DOI: 10.1016/j.jpowsour.2017.09.006

Nanocomposite-carbon coated at low-temperature: A new coating material for metallic bipolar plates of polymer electrolyte membrane fuel cells

S.H. Lee, V.E. Pukha, V.E. Vinogradov, N. Kakati, S.H. Jee, S.B. Cho and Y.S. Yoon

International Journal of Hydrogen Energy, 2013, 38, 14284
DOI: 10.1016/j.ijhydene.2013.08.013

Research progress on coating and coating technology of fuel cell metallic bipolar plate

Wei Tang, Saiqiang Wang, Song Li, Shen Yu, Xinye Yuan, Chunlei Yang and Weimin Li

Next Materials, 2024, 4, 100062
DOI: 10.1016/j.nxmate.2023.100062

All-in-one bipolar electrode: A new concept for compact and efficient water electrolyzers

Gaoqiang Yang, Zhiqiang Xie, Shule Yu, Kui Li, Yifan Li, Lei Ding, Weitian Wang and Feng-Yuan Zhang

Nano Energy, 2021, 90, 106551
DOI: 10.1016/j.nanoen.2021.106551

Generation of green hydrogen using self-sustained regenerative fuel cells: Opportunities and challenges

Ujwal Shreenag Meda, Yashesh Vijay Rajyaguru and Aditi Pandey

International Journal of Hydrogen Energy, 2023, 48, 28289
DOI: 10.1016/j.ijhydene.2023.03.430

Fabrication of high aspect ratio microchannel for proton exchange membrane fuel cell bipolar plates by micro roll forming process

Mehdi Karimi Firouzjaei, Hassan Moslemi Naeini, Mohammad Mehdi Kasaei and Lucas FM. da Silva

International Journal of Hydrogen Energy, 2026, 221, 154190
DOI: 10.1016/j.ijhydene.2026.154190

Design and Manufacturing Challenges in PEMFC Flow Fields—A Review

Prithvi Raj Pedapati, Shankar Raman Dhanushkodi, Ramesh Kumar Chidambaram, Dawid Taler, Tomasz Sobota and Jan Taler

Energies, 2024, 17, 3499
DOI: 10.3390/en17143499

Effect of Metal Bipolar Plate Channel Fabrication on Electroplating – Using Nickel Electroplating of AISI 1045 Channel Substrate as an Example

Te-Yuan Chiang, Ay-Su, Lin-Chang Tsai, Hung-Bin Lee, Cheng-Yu Lin, Hung-Hua Sheu and Cheng-Chieh Chang

International Journal of Electrochemical Science, 2015, 10, 1926
DOI: 10.1016/S1452-3981(23)04818-6

In Silico Screening and Design of Coating Materials for PEMFC Bipolar Plates

Longjie Liu, Li Yao, Kai Feng, Zhe Luo, Ke Liu, Hong Zhu and Paul. K. Chu

Coatings, 2018, 8, 386
DOI: 10.3390/coatings8110386

Semi-empirical modeling of electrical conductivity for composite bipolar plate with multiple reinforcements

B.K. Kakati, D. Sathiyamoorthy and A. Verma

International Journal of Hydrogen Energy, 2011, 36, 14851
DOI: 10.1016/j.ijhydene.2011.02.136

Investigation of incorporating oxygen into TiN coating to resist high potential effects on PEMFC bipolar plates in vehicle applications

Jie Jin, Menglei Hu and Xiaohua Zhao

International Journal of Hydrogen Energy, 2020, 45, 23310
DOI: 10.1016/j.ijhydene.2020.06.059

Microstructure and properties of a-C films deposited under different argon flow rate on stainless steel bipolar plates for proton exchange membrane fuel cells

Peiyun Yi, Weixin Zhang, Feifei Bi, Linfa Peng and Xinmin Lai

Journal of Power Sources, 2019, 410-411, 188
DOI: 10.1016/j.jpowsour.2018.10.054

A review of accelerated stress tests dedicated to proton exchange membrane fuel cells – Part I: Fuel cell component level

E. Pahon, D. Hissel and N. Yousfi-Steiner

Journal of Power Sources, 2022, 546, 231895
DOI: 10.1016/j.jpowsour.2022.231895

Interaction of point defects with twin boundaries in Au: A molecular dynamics study

Fayyaz Hussain, Sardar Sikandar Hayat, Zulfiqar Ali Shah, Najmul Hassan and Shaikh Aftab Ahmad

Chinese Phys. B, 2013, 22, 096102
DOI: 10.1088/1674-1056/22/9/096102

Hot stamping of ultra-thin stainless steel sheets for bipolar plates

Nan Guo, Xianglu Zhang, Zeran Hou, Wenyao Wang, Daijun Yang, Junying Min, Pingwen Ming and Cunman Zhang

Journal of Materials Processing Technology, 2023, 317, 117987
DOI: 10.1016/j.jmatprotec.2023.117987

Measuring In Situ Interfacial Contact Resistance in a Proton Exchange Membrane Fuel Cell

Sigrid Lædre, Ole Edvard Kongstein, Anders Oedegaard, Frode Seland and Håvard Karoliussen

J. Electrochem. Soc., 2019, 166, F853
DOI: 10.1149/2.1511912jes

Preparation and performance of PANI/CNTs composite coating on 316 stainless steel bipolar plates by pulsed electrodeposition

Haiqiang Yu, Quanzhong Guo, Chuan Wang, Gongwang Cao and Yuwei Liu

Progress in Organic Coatings, 2023, 182, 107611
DOI: 10.1016/j.porgcoat.2023.107611

Theory and practice of flow field designs for fuel cell scaling-up: A critical review

Junye Wang

Applied Energy, 2015, 157, 640
DOI: 10.1016/j.apenergy.2015.01.032

CrN/Cr multilayer coating on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells

Huabing Zhang, Guoqiang Lin, Ming Hou, Lin Hu, Zhiyun Han, Yu Fu, Zhigang Shao and Baolian Yi

Journal of Power Sources, 2012, 198, 176
DOI: 10.1016/j.jpowsour.2011.09.091

Investigation of the effects of process sequence on the contact resistance characteristics of coated metallic bipolar plates for polymer electrolyte membrane fuel cells

Cabir Turan, Ömer Necati Cora and Muammer Koç

Journal of Power Sources, 2013, 243, 925
DOI: 10.1016/j.jpowsour.2013.05.182

Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review

Nur Fawwaz Asri, Teuku Husaini, Abu Bakar Sulong, Edy Herianto Majlan and Wan Ramli Wan Daud

International Journal of Hydrogen Energy, 2017, 42, 9135
DOI: 10.1016/j.ijhydene.2016.06.241

Novel Design Method for the Roll Forming Process and Improved Forming Quality of 316L Stainless Steel BPP Flow Channels with Right-Angled Sidewalls

Fuqiang Zhao, Hugang Tian, Qingxue Huang, Yanlei Zhang, Xiaolong Xie, Zhigang Qi and Shuaifeng Chen

Chin. J. Mech. Eng., 2025, 38
DOI: 10.1186/s10033-025-01193-y

An in situ visualization system using synchrotron white X-rays to investigate the solidification behaviors of metallic materials

Hyeong Uk Mo, Min Woo Kim, Chang Hun Lee, Jina Kim, Hyun Wook Park, Jae-Hong Lim, Chang Hee Yim, Cheol Hee Nam, Jong Hyun Kim and Ho Jae Kwak

J Synchrotron Rad, 2025, 32, 1028
DOI: 10.1107/S1600577525003716

Flow‐Field Designs of Bipolar Plates in PEM Fuel Cells: Theory and Applications

J. Wang and H. Wang

Fuel Cells, 2012, 12, 989
DOI: 10.1002/fuce.201200074

Corrosion behavior of mesoporous transition metal nitrides

Minghui Yang, Amy J. Allen, Minh T. Nguyen, Walter T. Ralston, Michelle J. MacLeod and Francis J. DiSalvo

Journal of Solid State Chemistry, 2013, 205, 49
DOI: 10.1016/j.jssc.2013.06.026

Bipolar Plates for PEMFCs

C. A. C. Sequeira and L. Amaral

Journal of Fuel Cell Science and Technology, 2014, 11
DOI: 10.1115/1.4027254

Characterization of CrAl coating on stainless steel bipolar plates for polymer electrolyte membrane fuel cells

Ha Eun Kang, Ji-Hyeok Choi, Unho Lee, Hyun-Gil Kim and Young Soo Yoon

International Journal of Hydrogen Energy, 2024, 51, 1208
DOI: 10.1016/j.ijhydene.2023.03.021

Effect of manufacturing processes on contact resistance characteristics of metallic bipolar plates in PEM fuel cells

Cabir Turan, Ömer Necati Cora and Muammer Koç

International Journal of Hydrogen Energy, 2011, 36, 12370
DOI: 10.1016/j.ijhydene.2011.06.091

Carbon-based coatings for metallic bipolar plates used in proton exchange membrane fuel cells

Peiyun Yi, Di Zhang, Diankai Qiu, Linfa Peng and Xinmin Lai

International Journal of Hydrogen Energy, 2019, 44, 6813
DOI: 10.1016/j.ijhydene.2019.01.176

Air-breathing flexible Polydimethylsiloxane (PDMS)-based fuel cell

Ikwhang Chang, Min Hwan Lee, Ji-Hyun Lee, Youn-Sang Kim and Suk Won Cha

Int. J. Precis. Eng. Manuf., 2013, 14, 501
DOI: 10.1007/s12541-013-0067-1

An ultralight-weight polymer electrolyte fuel cell based on woven carbon fiber-resin reinforced bipolar plate

Hyunguk Choi, Dong Jun Seo, Won Young Choi, Seo Won Choi, Myeong Hwa Lee, Young Je Park, Tae Young Kim, Young Gi Yoon, Sung-Chul Yi and Chi-Young Jung

Journal of Power Sources, 2021, 484, 229291
DOI: 10.1016/j.jpowsour.2020.229291

Metallic glass separators for fuel cells at intermediate temperatures

Masaya Takemoto, Masatomo Hattori, Koichiro Hayashi, Shin-ichi Yamaura, Wei Zhang, Wataru Sakamoto and Toshinobu Yogo

Materials Letters, 2017, 206, 87
DOI: 10.1016/j.matlet.2017.06.115

Recent Developments of Polymer Electrolyte Membrane Fuel Cell Design

Wonchan Hwang and Yung-Eun Sung

J. Electrochem. Sci. Technol, 2023, 14, 120
DOI: 10.33961/jecst.2022.00808

Corrosion resistance and conductivity behavior of Cr-Al-N MAX phase coatings prepared by magnetron sputtering technology

Y.L. Su, W.H. Kao, J.H. Horng, H.C. Hsueh, Y.C. Cian and T.C. Hsieh

Thin Solid Films, 2024, 793, 140274
DOI: 10.1016/j.tsf.2024.140274

Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell

Diankai Qiu, Linfa Peng, Xinmin Lai, Meng Ni and Werner Lehnert

Renewable and Sustainable Energy Reviews, 2019, 113, 109289
DOI: 10.1016/j.rser.2019.109289

Niobium Sputter Coated Stainless Steel as a Bipolar Plate Material for Polymer Electrolyte Membrane Fuel Cell Stacks

Jun-Ho Kim, Sun-Kwang Kim, Yong-Zoo You, Dae-Il Kim, Sung-Tae Hong, Ho-Cheol Suh and K. Scott Weil

International Journal of Electrochemical Science, 2011, 6, 4365
DOI: 10.1016/S1452-3981(23)18334-9

Composite-coated aluminum bipolar plates for PEM fuel cells

Jennifer R. Mawdsley, J. David Carter, Xiaoping Wang, Suhas Niyogi, Chinbay Q. Fan, Rasit Koc and George Osterhout

Journal of Power Sources, 2013, 231, 106
DOI: 10.1016/j.jpowsour.2012.12.074

Material degradation of components in polymer electrolyte membrane (PEM) electrolytic cell and mitigation mechanisms: A review

F.N. Khatib, Tabbi Wilberforce, Oluwatosin Ijaodola, Emmanuel Ogungbemi, Zaki El-Hassan, A. Durrant, J. Thompson and A.G. Olabi

Renewable and Sustainable Energy Reviews, 2019, 111, 1
DOI: 10.1016/j.rser.2019.05.007

Low-nickel austenitic stainless steel as an alternative to 316L bipolar plate for proton exchange membrane fuel cells

Subash Rajasekar, Raghuram Chetty and Lakshman Neelakantan

International Journal of Hydrogen Energy, 2015, 40, 12413
DOI: 10.1016/j.ijhydene.2015.05.194

Ni-based amorphous alloy-coating for bipolar plate of PEM fuel cell by electrochemical plating

S Yamaura, S C Kim and A Inoue

J. Phys.: Conf. Ser., 2013, 417, 012029
DOI: 10.1088/1742-6596/417/1/012029

Experimental Evaluation into Novel, Low cost, Modular PEMFC Stack

Paul Scott, R.K Calay and Y.K. Chen

Energy Procedia, 2012, 29, 567
DOI: 10.1016/j.egypro.2012.09.066

A PEM fuel cell with metal foam as flow distributor

Chung-Jen Tseng, Bin Tsang Tsai, Zhong-Sheng Liu, Tien-Chun Cheng, Wen-Chen Chang and Shih-Kun Lo

Energy Conversion and Management, 2012, 62, 14
DOI: 10.1016/j.enconman.2012.03.018

A micro passive direct methanol fuel cell with high performance via plasma electrolytic oxidation on aluminum-based substrate

Huichao Deng, Xuelin Zhang, Zezhong Ma, Hailong Chen, Qiu Sun, Yufeng Zhang and Xiaowei Liu

Energy, 2014, 78, 149
DOI: 10.1016/j.energy.2014.09.070

Vertical‐Graphene‐Reinforced Titanium Alloy Bipolar Plates in Fuel Cells

Feng Yu, Kun Wang, Lingzhi Cui, Shengli Wang, Ming Hou, Feng Xiong, Ruqiang Zou, Peng Gao, Hailin Peng and Zhongfan Liu

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202110565

Effects of flow field on thermal management in proton exchange membrane fuel cell stacks: A numerical study

Yimeng Peng, Xiaohui Yan, Chen Lin, Shuiyun Shen, Jiewei Yin and Junliang Zhang

Int J Energy Res, 2021, 45, 7617
DOI: 10.1002/er.6343

Catalytic curing-driven ultrafast fabrication of high-density composite bipolar plates for PEMFCs

Xiaomin Meng, Chengxin Li, Runlin Fan, Junsheng Zheng and Pingwen Ming

Chinese Chemical Letters, 2025, 111480
DOI: 10.1016/j.cclet.2025.111480

Towards cost-effective and durable bipolar plates for proton exchange membrane electrolyzers: A review

Tao Liu, Youkun Tao, Yanli Wang, Meiqi Hu, Zhen Zhang and Jing Shao

Fuel, 2024, 368, 131610
DOI: 10.1016/j.fuel.2024.131610

Effect of Oxygen Gas on Corrosion Behavior of Electro-Polymerization PANI Coating in PEMFC Environments

Wan Qiu Zhou, Xin Li, Ting Ting Huang, Jian Wang, Shi Gang Xin and Hong Bo Zhang

AMR, 2014, 1070-1072, 521
DOI: 10.4028/www.scientific.net/AMR.1070-1072.521

Mechanochemically Synthesized Transition Metal Carbide Fillers for Coating Metallic Bipolar Plates in Proton Exchange Membrane Fuel Cells

Jil Meyers, Özgül Agbaba, Henning Buchholz and Ferdi Schüth

Energy Tech, 2026, 14
DOI: 10.1002/ente.202501231

Pre-oxidized and nitrided stainless steel alloy foil for proton exchange membrane fuel cell bipolar plates: Part 1. Corrosion, interfacial contact resistance, and surface structure

M.P. Brady, H. Wang, J.A. Turner, H.M. Meyer, K.L. More, P.F. Tortorelli and B.D. McCarthy

Journal of Power Sources, 2010, 195, 5610
DOI: 10.1016/j.jpowsour.2010.03.055

Effects of passive films on corrosion resistance of uncoated SS316L bipolar plates for proton exchange membrane fuel cell application

Ying Yang, Xiaohui Ning, Hongsheng Tang, Liejin Guo and Hongtan Liu

Applied Surface Science, 2014, 320, 274
DOI: 10.1016/j.apsusc.2014.09.049

Temperature dependence of morphology and oxygen reduction reaction activity for carbon-supported Pd–Co electrocatalysts

E. F. Abo Zeid, Dae-Suk Kim, Hee Soo Lee and Yong-Tae Kim

J Appl Electrochem, 2010, 40, 1917
DOI: 10.1007/s10800-010-0177-8

Micro-roll forming of stainless steel bipolar plates for fuel cells

Buddhika Abeyrathna, Peng Zhang, Michael P. Pereira, Daniel Wilkosz and Matthias Weiss

International Journal of Hydrogen Energy, 2019, 44, 3861
DOI: 10.1016/j.ijhydene.2018.12.013

Corrosion protection of CrN/TiN multi-coating for bipolar plate of polymer electrolyte membrane fuel cell

Nguyen Dang Nam, Deok Su Jo, Jung Gu Kim and Dae Ho Yoon

Thin Solid Films, 2011, 519, 6787
DOI: 10.1016/j.tsf.2011.01.207

Investigation of stamping process of metallic bipolar plates in PEM fuel cell—Numerical simulation and experiments

Qinghui Hu, Dongming Zhang, Hao Fu and KaiKai Huang

International Journal of Hydrogen Energy, 2014, 39, 13770
DOI: 10.1016/j.ijhydene.2014.01.201

Research progress and prospect of the materials of bipolar plates for proton exchange membrane fuel cells (PEMFCs)

Xin Gao, Jiayi Chen, Runjing Xu, Zheng Zhen, Xiantai Zeng, Xiaodong Chen and Lifeng Cui

International Journal of Hydrogen Energy, 2024, 50, 711
DOI: 10.1016/j.ijhydene.2023.09.005

Factors affecting corrosion behavior of SS316L as bipolar plate material in PEMFC cathode environments

Ying Yang, Liejin Guo and Hongtan Liu

International Journal of Hydrogen Energy, 2012, 37, 13822
DOI: 10.1016/j.ijhydene.2012.04.026

Superhydrophobic Stainless Steel Bipolar Plates with Fractal Structure for Fuel Cells by Nanosecond Laser Ablation

Gang Yang, Dongguang Zhang, Yali Wu, Xiaoting Xue, Chenyu Liang, Jiayi Yang and Ruizhe Xing

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202200706

Two-stage forming approach for manufacturing ferritic stainless steel bipolar plates in PEM fuel cell: Experiments and numerical simulations

Hyuk Jong Bong, Jinwoo Lee, Jong-Hee Kim, Frédéric Barlat and Myoung-Gyu Lee

International Journal of Hydrogen Energy, 2017, 42, 6965
DOI: 10.1016/j.ijhydene.2016.12.094

A novel PEMEC with 3D printed non-conductive bipolar plate for low-cost hydrogen production from water electrolysis

Gaoqiang Yang, Shule Yu, Zhenye Kang, Yeshi Dohrmann, Guido Bender, Bryan S. Pivovar, Johney B. Green, Scott T. Retterer, David A. Cullen and Feng-Yuan Zhang

Energy Conversion and Management, 2019, 182, 108
DOI: 10.1016/j.enconman.2018.12.046

Advancements in bipolar plate materials and manufacturing strategies for polymer electrolyte membrane (PEM) electrolyzers: a review

Muhammad Fauzan Aminuddin, Rizwan Ullah, Mohd Shahbudin Masdar, Azran Mohd Zainoodin, Rozan Mohamad Yunus, Edy Herianto Majlan, Nurul Akidah Baharudin, Kamarul Hafiz Mohamed, Nik Mohd Radi Nik Mohamed Daud, Teuku Husaini and Adam Mohd Izhan Noor Azam

Journal of Industrial and Engineering Chemistry, 2026
DOI: 10.1016/j.jiec.2026.02.011

Corrosion Inhibition Mechanisms of Cral Binary Alloy Coating as Metallic Bipolar Plates for Pemfc

Ha Eun Kang, Ji Hyeok Choi, Unho Lee, Hyun-Gil Kim and Young Soo Yoon

SSRN Journal, 2022
DOI: 10.2139/ssrn.4064419

Preparation and properties of nitride multilayer coating modified stainless steel as bipolar plates for proton exchange membrane fuel cells

Xuefei Wang, Hong Luo, Hongxu Cheng, Chunyu Qiao, Qiancheng Zhao, Zhanfeng Deng, Guizhi Xu, Jie Song and Xiaogang Li

Journal of Industrial and Engineering Chemistry, 2024, 130, 266
DOI: 10.1016/j.jiec.2023.09.030

Probing Formability Improvement of Ultra-thin Ferritic Stainless Steel Bipolar Plate of PEMFC in Non-conventional Forming Process

Hyuk Jong Bong, Frédéric Barlat and Myoung-Gyu Lee

Metall Mater Trans A, 2016, 47, 4160
DOI: 10.1007/s11661-016-3561-0

Development of PVD coatings for PEMFC metallic bipolar plates

H. Sun, K. Cooke, G. Eitzinger, P. Hamilton and B. Pollet

Thin Solid Films, 2013, 528, 199
DOI: 10.1016/j.tsf.2012.10.094

Investigation of multi-coating process treated magnesium alloy as bipolar plate in polymer electrolyte membrane fuel cell

Kai Feng, Xingwu Guo, Zhuguo Li, Chengwu Yao and Yixiong Wu

International Journal of Hydrogen Energy, 2016, 41, 6020
DOI: 10.1016/j.ijhydene.2016.02.147

On the Compressibility of Gas Diffusion Layers in Proton Exchange Membrane Fuel Cells

M. S. Ismail, A. Hassanpour, D. B. Ingham, L. Ma and M. Pourkashanian

Fuel Cells, 2012, 12, 391
DOI: 10.1002/fuce.201100054

Optimization of the electropolishing process of titanium using Taguchi robust design and surface analysis in an eco-friendly electrolyte

Hyun-Kyu Hwang and Seong-Jong Kim

Applied Surface Science, 2025, 686, 162092
DOI: 10.1016/j.apsusc.2024.162092

Production of Ni-P Amorphous Alloy-Coated Bipolar Plate for PEM Fuel Cell by Electro-Less Plating

Sung-chul Kim, Shin-ichi Yamaura, Akihiro Makino and Akihisa Inoue

J. Japan Inst. Metals, 2011, 75, 557
DOI: 10.2320/jinstmet.75.557

Porous Flow Field for Next-Generation Proton Exchange Membrane Fuel Cells: Materials, Characterization, Design, and Challenges

Guobin Zhang, Zhiguo Qu, Wen-Quan Tao, Xueliang Wang, Lizhen Wu, Siyuan Wu, Xu Xie, Chasen Tongsh, Wenming Huo, Zhiming Bao, Kui Jiao and Yun Wang

Chem. Rev., 2023, 123, 989
DOI: 10.1021/acs.chemrev.2c00539

Gas permeability, wettability and morphology of gas diffusion layers before and after performing a realistic ex-situ compression test

F. Aldakheel, M.S. Ismail, K.J. Hughes, D.B. Ingham, L. Ma, M. Pourkashanian, D. Cumming and R. Smith

Renewable Energy, 2020, 151, 1082
DOI: 10.1016/j.renene.2019.11.109

Production of Ni-Cr-P-B Alloy-Coated Bipolar Plates for PEMFC by HVOF Spray-Coating and Their Surface Analysis by XPS

Sung-Chul Kim, Shin-ichi Yamaura, Takanori Igarashi, Yuta Shimizu, Koji Nakashima, Akihiro Makino and Akihisa Inoue

J. Japan Inst. Metals, 2011, 75, 122
DOI: 10.2320/jinstmet.75.122

Effects of Potential on Corrosion Behavior of Uncoated SS316L Bipolar Plate in Simulated PEM Fuel Cell Cathode Environment

Y. Yang, X. Ning, H. Tang, L. Guo and H. Liu

Fuel Cells, 2014, 14, 868
DOI: 10.1002/fuce.201300288

Carbon-based materials for bipolar plates for low-temperatures PEM fuel cells — A review

Renata Wlodarczyk

Funct. Mater. Lett., 2019, 12, 1930001
DOI: 10.1142/S1793604719300019

Degradation Mechanisms in PEM Water Electrolysis: Diagnosis and Impact

Annik Bernhardt, Katja Lange, Robert Göckeritz, Erik Grunwald, Angelika Hähnel, Alexander Müller, Volker Naumann, Sistan Rasuli, Wolfram Münchgesang, Bruno G. Pollet, Kerstin Witte‐Bodnar and Klemens Ilse

Adv Materials Technologies, 2026
DOI: 10.1002/admt.202502419

Experimental investigations on the corrosion resistance characteristics of coated metallic bipolar plates for PEMFC

Ender Dur, Ömer Necati Cora and Muammer Koç

International Journal of Hydrogen Energy, 2011, 36, 7162
DOI: 10.1016/j.ijhydene.2011.03.014

Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells

Linfa Peng, Peiyun Yi and Xinmin Lai

International Journal of Hydrogen Energy, 2014, 39, 21127
DOI: 10.1016/j.ijhydene.2014.08.113

CFD prediction of shunt currents present in alkaline fuel cells

Ge Zhou, Lea-Der Chen and James P. Seaba

Journal of Power Sources, 2011, 196, 8180
DOI: 10.1016/j.jpowsour.2011.04.029

Production of Ni-Based Glassy Alloy-Coated Bipolar Plate with Hydrophilic Surface for PEMFC and Its Evaluation by Electrochemical Impedance Spectroscopy

Shin-ichi Yamaura, Ken-ichi Katsumata, Masatomo Hattori and Toshinobu Yogo

Mater. Trans., 2013, 54, 1324
DOI: 10.2320/matertrans.MF201309

Electrochemical Properties of Titanium in PEFC Bipolar Plate Environments

Yasutaka Soma, Izumi Muto and Nobuyoshi Hara

Mater. Trans., 2010, 51, 939
DOI: 10.2320/matertrans.M2009402

Experimental Investigation into a Novel Modular PEMFC Fuel Cell Stack

P. Scott, Y. Chen, R. Calay and F. Bhinder

Fuel Cells, 2015, 15, 306
DOI: 10.1002/fuce.201200212

Potentiodynamic polarization test as a versatile tool for bipolar plates materials at start-up and shut-down environments: a review

Paul C. Okonkwo, Ikram Ben Belgacem, Oladeji O. Ige, Wilfred Emori, Paul C. Uzoma, Mohammad Omar Eqbal and Himangshu Bhowmik

International Journal of Green Energy, 2021, 18, 1193
DOI: 10.1080/15435075.2021.1904948

ZrN-Based Multilayers Prepared by Reactive Sputtering as Coatings for Electrode Plates of Proton Exchange Membrane Water Electrolyzers

Jon Aizpuru, Eva Céspedes, José Luis Gómez de la Fuente, Alicia de Andrés, Carlos Prieto, María Retuerto, Sergio Rojas, Samba V. Bueno and Esteban Climent-Pascual

ACS Appl. Mater. Interfaces, 2024, 16, 66470
DOI: 10.1021/acsami.4c14933

Proton exchange membrane fuel cell of integrated porous bipolar plate–gas diffusion layer structure: Entire morphology simulation

Guobin Zhang, Zhiguo Qu and Yun Wang

eTransportation, 2023, 17, 100250
DOI: 10.1016/j.etran.2023.100250

Electrodeposition of Ni-W/CNT Composite Plating and Its Potential as Coating for PEMFC Bipolar Plate

Jae-Hyeok Park, Tatsuya Wada, Yuto Naruse, Takeshi Hagio, Yuki Kamimoto and Ichino Ryoichi

Coatings, 2020, 10, 1095
DOI: 10.3390/coatings10111095

Exploring the Interface of Skin‐Layered Titanium Fibers for Electrochemical Water Splitting

Chang Liu, Meital Shviro, Aldo S. Gago, Sarah F. Zaccarine, Guido Bender, Pawel Gazdzicki, Tobias Morawietz, Indro Biswas, Marcin Rasinski, Andreas Everwand, Roland Schierholz, Jason Pfeilsticker, Martin Müller, Pietro P. Lopes, Rüdiger‐A. Eichel, Bryan Pivovar, Svitlana Pylypenko, K. Andreas Friedrich, Werner Lehnert and Marcelo Carmo

Advanced Energy Materials, 2021, 11
DOI: 10.1002/aenm.202002926

Fabrication of self‐supported catalysts via electrodeposition for proton exchange membrane water electrolysis: Emphasizing on the porous transport layers

Jin Uk Jang, Ashish Gaur, Sungwook Mhin and HyukSu Han

EcoEnergy, 2024, 2, 381
DOI: 10.1002/ece2.55

Production of Ni-P Amorphous Alloy-Coated Bipolar Plate for PEM Fuel Cell by Electro-Less Plating

Sung-chul Kim, Shin-ichi Yamaura, Akihiro Makino and Akihisa Inoue

Mater. Trans., 2011, 52, 709
DOI: 10.2320/matertrans.MBW201007

Performance of Ti–Ag-deposited titanium bipolar plates in simulated unitized regenerative fuel cell (URFC) environment

Huabing Zhang, Ming Hou, Guoqiang Lin, Zhiyun Han, Yu Fu, Shucheng Sun, Zhigang Shao and Baolian Yi

International Journal of Hydrogen Energy, 2011, 36, 5695
DOI: 10.1016/j.ijhydene.2011.01.154

Corrosion resistance in simulated DMFC environment of plasma electrolytic oxidation coating prepared on aluminum alloy

Huichao Deng, Zezhong Ma, Xuelin Zhang, Yufeng Zhang and Xiaowei Liu

Surface and Coatings Technology, 2015, 269, 108
DOI: 10.1016/j.surfcoat.2015.02.027

Stainless steel bipolar plates for proton exchange membrane fuel cells: Materials, flow channel design and forming processes

Yu Leng, Pingwen Ming, Daijun Yang and Cunman Zhang

Journal of Power Sources, 2020, 451, 227783
DOI: 10.1016/j.jpowsour.2020.227783

Electrochemical Synthesis of PANI on 316L Stainless Steel Bipolar Plates of PEMFC and its Corrosion Performance

Wan Qiu Zhou, Xin Li, Li Sheng, Ting Ting Huang, Shi Wei Wu and Yan Hong Kang

AMR, 2014, 1004-1005, 608
DOI: 10.4028/www.scientific.net/AMR.1004-1005.608

Titanium bipolar plates augmented by nanocrystalline TiZrHfMoW coatings for application in proton exchange membrane fuel cells

Shuang Peng, Jiang Xu, Zong-Han Xie and Paul Munroe

Applied Surface Science, 2022, 591, 153200
DOI: 10.1016/j.apsusc.2022.153200

X-ray Photoelectron Spectroscopy of the Passive Surface of Nickel-Carbon Electrocatalysts after Polarisation in Sulfuric Acid

Gareth E. Haslam, Xiao-Yao Chin and G. Tim Burstein

Electrochimica Acta, 2014, 118, 157
DOI: 10.1016/j.electacta.2013.11.161

Bipolar plate development with additive manufacturing and protective coating for durable and high-efficiency hydrogen production

Gaoqiang Yang, Shule Yu, Jingke Mo, Zhenye Kang, Yeshi Dohrmann, Frederick A. List, Johney B. Green, Sudarsanam S. Babu and Feng-Yuan Zhang

Journal of Power Sources, 2018, 396, 590
DOI: 10.1016/j.jpowsour.2018.06.078

The effect of pH and halides on the corrosion process of stainless steel bipolar plates for proton exchange membrane fuel cells

Sigrid Lædre, Ole Edvard Kongstein, Anders Oedegaard, Frode Seland and Håvard Karoliussen

International Journal of Hydrogen Energy, 2012, 37, 18537
DOI: 10.1016/j.ijhydene.2012.09.021

Electrochemical aspects of interconnect materials in PEMFCs

Saman Khosravi H, Qamar Abbas and Klaus Reichmann

International Journal of Hydrogen Energy, 2021, 46, 35420
DOI: 10.1016/j.ijhydene.2021.08.105

Pre-oxidized and nitrided stainless steel alloy foil for proton exchange membrane fuel cell bipolar plates. Part 2: Single-cell fuel cell evaluation of stamped plates

Todd J. Toops, Michael P. Brady, Peter F. Tortorelli, Josh A. Pihl, Francisco Estevez, Daniel Connors, Fernando Garzon, Tommy Rockward, Don Gervasio, William Mylan and Sree Harsha Kosaraju

Journal of Power Sources, 2010, 195, 5619
DOI: 10.1016/j.jpowsour.2010.03.056

Corrosion Behavior of Conducting Polymer PANI in Simulating PEMFC Conditions

Wan Qiu Zhou, Xin Li, Ting Ting Huang, Jian Wang, Shi Gang Xin and Yan Hong Kang

AMM, 2014, 700, 117
DOI: 10.4028/www.scientific.net/AMM.700.117

Three-dimensional macroporous anodes based on stainless steel fiber felt for high-performance microbial fuel cells

Junxian Hou, Zhongliang Liu, Siqi Yang and Yu Zhou

Journal of Power Sources, 2014, 258, 204
DOI: 10.1016/j.jpowsour.2014.02.035

Crystal plasticity finite element–Marciniak-Kuczynski approach with surface roughening effect in predicting formability of ultra-thin ferritic stainless steel sheets

Hyuk Jong Bong and Jinwoo Lee

International Journal of Mechanical Sciences, 2021, 191, 106066
DOI: 10.1016/j.ijmecsci.2020.106066

A nanocrystalline zirconium carbide coating as a functional corrosion-resistant barrier for polymer electrolyte membrane fuel cell application

Jiang Xu, ZhengYang Li, Song Xu, Paul Munroe and Zong-Han Xie

Journal of Power Sources, 2015, 297, 359
DOI: 10.1016/j.jpowsour.2015.08.024

Contact resistance characteristics of coated metallic bipolar plates for PEM fuel cells – investigations on the effect of manufacturing

Cabir Turan, Ömer Necati Cora and Muammer Koç

International Journal of Hydrogen Energy, 2012, 37, 18187
DOI: 10.1016/j.ijhydene.2012.09.042

Feasibility study of a double-step hydroforming process for fabrication of fuel cell bipolar plates with slotted interdigitated serpentine flow field

N. Mohammadtabar, M. Bakhshi-Jooybari, S. J. Hosseinipour and A. H. Gorji

Int J Adv Manuf Technol, 2016, 85, 765
DOI: 10.1007/s00170-015-7960-y

Structural design of gas diffusion layer for proton exchange membrane fuel cell at varying humidification

Liang Chen, Rui Lin, Shenghao Tang, Di Zhong and Zhixian Hao

Journal of Power Sources, 2020, 467, 228355
DOI: 10.1016/j.jpowsour.2020.228355