Issue 2, 2023

Highly conductive and long-term stable films from liquid-phase exfoliated platinum diselenide

Abstract

Liquid-phase exfoliation (LPE) has been introduced as a versatile and scalable production method for two-dimensional (2D) materials. This method yields dispersions that allow for the fabrication of printable and flexible electronic devices. However, the fabrication of uniform and homogeneous films from LPE dispersions with a performance similar to that of bottom-up grown materials remains a challenge, as the film quality strongly influences the optical and electrical performance of devices. Furthermore, long-term stability remains a major challenge for all 2D material based applications. In this study, we report on highly conductive tiled network films made of platinum diselenide (PtSe2) flakes derived using a scalable LPE method. We characterized the homogeneous films in terms of morphology and electrical behavior. As an example of applicability, we produce a chemiresistive sensor structure with the PtSe2 films and show significant resistance changes upon periodic ammonia gas exposures, revealing a sub-0.1 part per million (ppm) detection limit (DL). More remarkably the devices are fully functional after 15 months, underlining the high stability of PtSe2 based devices.

Graphical abstract: Highly conductive and long-term stable films from liquid-phase exfoliated platinum diselenide

Supplementary files

Article information

Article type
Paper
Submitted
15 sep. 2022
Accepted
03 nóv. 2022
First published
16 des. 2022
This article is Open Access
Creative Commons BY license

J. Mater. Chem. C, 2023,11, 593-599

Highly conductive and long-term stable films from liquid-phase exfoliated platinum diselenide

K. Lee, B. M. Szydłowska, O. Hartwig, K. Synnatschke, B. Tywoniuk, T. Hartman, T. Tomašević-Ilić, C. P. Gabbett, J. N. Coleman, Z. Sofer, M. Spasenović, C. Backes and G. S. Duesberg, J. Mater. Chem. C, 2023, 11, 593 DOI: 10.1039/D2TC03889G

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements