Issue 17, 2023

Large scale recyclable monolithic methyltrimethoxysilane aerogels formed by self-reinforcement

Abstract

A method by which large scale monoliths of methyltrimethoxysilane (MTMS) aerogels may be prepared using ambient pressure conditions is discussed. It has been found that the addition of powdered dry MTMS aerogel into the precursor mixture substantially increases the size of the aerogel monolith which may be formed without cracking, decreases shrinkage and improves the mechanical strength of the resulting monoliths, which are termed self-reinforced aerogels (SRAs). A discussion of the mechanism by which this enhanced strength arises is presented, with observations of the microscopic differences to the gelation process and final dried product when a self-reinforcement strategy is used.

Graphical abstract: Large scale recyclable monolithic methyltrimethoxysilane aerogels formed by self-reinforcement

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
24 feb. 2023
Accepted
14 jún. 2023
First published
27 júl. 2023
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2023,4, 3724-3732

Large scale recyclable monolithic methyltrimethoxysilane aerogels formed by self-reinforcement

G. Odling, H. Logan, A. Chan, A. J. Bissel, C. R. Pulham and D. E. Oliver, Mater. Adv., 2023, 4, 3724 DOI: 10.1039/D3MA00085K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements