Issue 10, 2022

Sodium doping for enhanced performance by highly efficient CsPbBr3 quantum dot-based electroluminescent light-emitting diodes

Abstract

Metal halide perovskite quantum dots (QDs) are emerging as promising materials for illumination and display applications owing to their unique optical and electronic properties. However, research into the doping of perovskite QDs with alkali metal cations for use in light-emitting diode (LED) devices is limited. Herein, a facile and convenient room-temperature method for synthesizing Na+-ion-doped CsPbBr3 QDs is presented. Through the optimization of the Na+ doping concentration, the as-prepared Na+-doped CsPbBr3 QDs display a higher photoluminescence quantum yield of 94.74%, faster radiative recombination rate of 30.4 μs−1, and longer lifetime of 31.2 ns than their undoped counterparts, allowing the practical realization of high-efficiency electroluminescent QD LED (QLED) devices. As a result, a maximum luminance of 20 190 cd m−2, a peak current efficiency of 34.5 cd A−1, and an external quantum efficiency of 8.97% for as-fabricated QLEDs are obtained; all these characteristics are higher than those of the control device with undoped CsPbBr3 QDs. Experimental studies combined with auxiliary theoretical calculations indicate that the enhanced performance can be chiefly attributed to the decreased trap defect density of the perovskite upon sodium incorporation. This research indicates the immense potential of the Na+-doped CsPbBr3 QDs to act as an emission layer for use in the next-generation illumination and display fields.

Graphical abstract: Sodium doping for enhanced performance by highly efficient CsPbBr3 quantum dot-based electroluminescent light-emitting diodes

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
16 des. 2021
Accepted
31 jan. 2022
First published
01 feb. 2022

J. Mater. Chem. C, 2022,10, 3729-3737

Sodium doping for enhanced performance by highly efficient CsPbBr3 quantum dot-based electroluminescent light-emitting diodes

Y. Huang, P. Tang, W. Zhang, W. Yan, B. Liu, X. Tang, Z. Wang, Y. Peng and W. Chen, J. Mater. Chem. C, 2022, 10, 3729 DOI: 10.1039/D1TC05997A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements