Issue 2, 2019

Flow stabilizer on a syringe tip for hand-powered microfluidic sample injection

Abstract

Precise, portable, low-cost sample injection is strongly demanded for use in point-of-care testing devices in resource-poor settings; however, current microfluidic sample injection techniques are often expensive, bulky and electricity-powered. To address this issue, we propose a novel syringe flow-stabilizer for hand-powered, precise, continuous-flow microfluidic sample injection. Our syringe flow-stabilizer applies the principle of passive flow-resistance compensation to stabilize the unstable sample flow and has the special advantages of easy-to-use, simple structure, low cost and high stability. The flow stabilizing performance of the stabilizer is characterized via a series of experiments and the results show that our stabilizer is capable of outputting a constant flow rate up to several milliliters per minute under a low threshold pressure. Finally, the fabricated syringe flow-stabilizer is integrated with an inertial microfluidic cell concentrator for high-throughput continuous concentration of trace blood cells from large-volume biofluids. The use of our stabilizer makes the concentration performance totally independent of operation. We envision wide applications of our syringe flow-stabilizer as a hand-powered sample injection unit in various point-of-care testing devices in resource-poor settings.

Graphical abstract: Flow stabilizer on a syringe tip for hand-powered microfluidic sample injection

Supplementary files

Article information

Article type
Paper
Submitted
04 okt. 2018
Accepted
03 des. 2018
First published
04 des. 2018

Lab Chip, 2019,19, 214-222

Flow stabilizer on a syringe tip for hand-powered microfluidic sample injection

N. Xiang, Y. Han, Y. Jia, Z. Shi, H. Yi and Z. Ni, Lab Chip, 2019, 19, 214 DOI: 10.1039/C8LC01051J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements