Issue 17, 2019

Highly dispersed γ-Fe2O3 embedded in nitrogen doped carbon for the efficient oxygen reduction reaction

Abstract

The development of non-precious metal electrocatalysts with both high activity and durability to replace costly Pt-based catalysts for the oxygen reduction reaction (ORR) is still a major challenge. Composites of metal-oxide(s) and nitrogen doped (N-doped) carbon have emerged as promising candidates for the ORR in energy conversion and metal–air batteries. Herein, we report a versatile and robust sacrificial template approach to synthesize highly dispersed γ-Fe2O3 embedded in porous N-doped carbon with a high surface area. The as-prepared Fe2O3@NC-800 possesses a pure phase of γ-Fe2O3 with a small size, which interacts synergistically with N-doped carbon to increase ORR activity and selectivity. Fe2O3@NC-800 performs better than the commercial 20 wt% Pt/C as well as most iron-based non-precious metal catalysts reported previously. The assembled zinc–air battery with Fe2O3@NC-800 as a cathode catalyst exhibits a maximum power density of 112 mW cm−2 along with good operation durability, which is superior to that of 20 wt% Pt/C (68 mW cm−2).

Graphical abstract: Highly dispersed γ-Fe2O3 embedded in nitrogen doped carbon for the efficient oxygen reduction reaction

Supplementary files

Article information

Article type
Paper
Submitted
17 jún. 2019
Accepted
31 júl. 2019
First published
01 ágú. 2019

Catal. Sci. Technol., 2019,9, 4581-4587

Highly dispersed γ-Fe2O3 embedded in nitrogen doped carbon for the efficient oxygen reduction reaction

Z. Xiao, G. Shen, F. Hou, R. Zhang, Y. Li, G. Yuan, L. Pan, J. Zou, L. Wang, X. Zhang and G. Li, Catal. Sci. Technol., 2019, 9, 4581 DOI: 10.1039/C9CY01188A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements