Issue 19, 2017

Cellulose ionics: switching ionic diode responses by surface charge in reconstituted cellulose films

Abstract

Cellulose films as well as chitosan-modified cellulose films of approximately 5 μm thickness, reconstituted from ionic liquid media onto a poly(ethylene-terephthalate) (PET, 6 μm thickness) film with a 5, 10, 20, or 40 μm diameter laser-drilled microhole, show significant current rectification in aqueous NaCl. Reconstituted α-cellulose films provide “cationic diodes” (due to predominant cation conductivity) whereas chitosan-doped cellulose shows “anionic diode” effects (due to predominant anion conductivity). The current rectification, or “ionic diode” behaviour, is investigated as a function of NaCl concentration, pH, microhole diameter, and molecular weight of the chitosan dopant. Future applications are envisaged exploiting the surface charge induced switching of diode currents for signal amplification in sensing.

Graphical abstract: Cellulose ionics: switching ionic diode responses by surface charge in reconstituted cellulose films

Article information

Article type
Paper
Submitted
03 jún. 2017
Accepted
13 ágú. 2017
First published
14 ágú. 2017
This article is Open Access
Creative Commons BY-NC license

Analyst, 2017,142, 3707-3714

Cellulose ionics: switching ionic diode responses by surface charge in reconstituted cellulose films

B. D. B. Aaronson, D. Wigmore, M. A. Johns, J. L. Scott, I. Polikarpov and F. Marken, Analyst, 2017, 142, 3707 DOI: 10.1039/C7AN00918F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements