Experimentally designed chemometric models for the assay of toxic adulterants in turmeric powder

Shymaa S. Soliman, Alaadin E. El-Haddad, Ghada A. Sedik, Mohamed R. Elghobashy, Hala E. Zaazaa and Ahmed S. Saad

RSC Adv., 2022, 12, 9087
DOI: 10.1039/D2RA00697A

Vat photopolymerization-based 3D printing of polymer nanocomposites: current trends and applications

Mussadiq Shah, Abid Ullah, Kashif Azher, Asif Ur Rehman, Wang Juan, Nizami Aktürk, Celal Sami Tüfekci and Metin U. Salamci

RSC Adv., 2023, 13, 1456
DOI: 10.1039/D2RA06522C

Additive manufacturing of polymers and composites for applications in aerospace and aeronautics

Francesca Aliberti, Raffaele Longo, Marialuigia Raimondo, Roberto Pantani, Luigi Vertuccio and Liberata Guadagno

Mater. Horiz., 2026, 13, 532
DOI: 10.1039/D5MH01403D

Systematic study of FFF materials for digitalizing chemical reactors with 3D printing: superior performance of carbon-filled polyamide

Victoria A. Korabelnikova, Evgeniy G. Gordeev and Valentine P. Ananikov

React. Chem. Eng., 2023, 8, 1613
DOI: 10.1039/D2RE00395C

Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective

Akhilesh Kumar Pal, Amar K. Mohanty and Manjusri Misra

RSC Adv., 2021, 11, 36398
DOI: 10.1039/D1RA04060J

A review on hydroxyapatite fabrication: from powders to additive manufactured scaffolds

Ananthika Vijayan, Jithin Vishnu, Revathi A, Balakrishnan Shankar and Sreedha Sambhudevan

Biomater. Sci., 2025, 13, 913
DOI: 10.1039/D4BM00972J

Clinical translation and challenges of biodegradable magnesium-based interference screws in ACL reconstruction

Ying Luo, Chao Zhang, Jue Wang, Fangfei Liu, Kelvin Wingho Chau, Ling Qin and Jiali Wang

Bioactive Materials, 2021, 6, 3231
DOI: 10.1016/j.bioactmat.2021.02.032

Effect of Sterilization on the Dimensional and Mechanical Behavior of Polylactic Acid Pieces Produced by Fused Deposition Modeling

Israel Garnica-Bohórquez, Viviana R. Güiza-Argüello and Clara I. López-Gualdrón

Polymers, 2023, 15, 3317
DOI: 10.3390/polym15153317

Recent development in the additive manufacturing of polymer-based composites for automotive structures—a review

Smith Salifu, Dawood Desai, Olugbenga Ogunbiyi and Kampamba Mwale

Int J Adv Manuf Technol, 2022, 119, 6877
DOI: 10.1007/s00170-021-08569-z

Design and mathematical modeling of polymeric phases to obtain controlled microporosity materials by 3D printing

Marco A. Morales, Sinhue Ruiz-Salgado, Ricardo Agustín-Serrano, Benito Zenteno-Mateo and José I. Rodríguez-Mora

Prog Addit Manuf, 2023, 8, 1701
DOI: 10.1007/s40964-023-00437-4

Mechanical Recycling of a Short Carbon Fiber Reinforced Polyamide 6 in 3D Printing: Effects on Mechanical Properties

Marco Zanelli, Giulia Ronconi, Nicola Pritoni, Andrea D’Iorio, Monica Bertoldo, Francesco Mollica and Valentina Mazzanti

Polymers, 2025, 18, 27
DOI: 10.3390/polym18010027

Neutron moderation and manufacturing viability of 3D printed Acrylonitrile Butadiene Styrene spheres for use in neutron radiation detectors

Lucas Moacir Machado Mendes, Juliana Batista da Silva, Evaldo Simões da Fonseca, Walsan Wagner Pereira, Hector Rene Vega-Carrillo, Roberto Méndez, Edson Ribeiro and Marco Aurélio de Sousa Lacerda

Radiation Physics and Chemistry, 2024, 218, 111613
DOI: 10.1016/j.radphyschem.2024.111613

Assessment of the mechanical properties of PC/ABS blends for functional prototyping by FFF 3D printing

Cleiton Lazaro Fazolo De Assis and Cleber Augusto Rampazo

RPJ, 2024, 30, 214
DOI: 10.1108/RPJ-04-2023-0153

A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

Usman Shaukat, Elisabeth Rossegger and Sandra Schlögl

Polymers, 2022, 14, 2449
DOI: 10.3390/polym14122449

A comprehensive review of natural fiber reinforced Polymer composites as emerging materials for sustainable applications

Nelson Ehiosu Ajayi, Sona Rusnakova, Augustina Ebele Ajayi, Raphael Olabanji Ogunleye, Stanley Onyedekachi Agu and Andrew Nosakhare Amenaghawon

Applied Materials Today, 2025, 43, 102666
DOI: 10.1016/j.apmt.2025.102666

A Methodological Framework for Assessing the Influence of Process Parameters on Strand Stability and Functional Performance in Fused Filament Fabrication

Eleni Gkartzou, Artemis Kontiza, Konstantinos Zafeiris, Elena Mantzavinou and Costas A. Charitidis

Materials, 2023, 16, 7530
DOI: 10.3390/ma16247530

Composite thermoplastic materials for filament production in 3D printing technology

Alexander Antonov, Khurshidbek Nurmetov, Alimjon Riskulov, Talgat Urazbaev, Vasily Struk and Denis Nakhvat

Vib. proced., 2025, 60, 424
DOI: 10.21595/vp.2025.25691

Predicting Work-in-Process in Semiconductor Packaging Using Neural Networks: Technical Evaluation and Future Applications

Chin-Ta Wu, Shing-Han Li and David C. Yen

Electronics, 2024, 13, 4275
DOI: 10.3390/electronics13214275

Effect of post-process treatments on mechanical properties and surface characteristics of 3D printed short glass fiber reinforced PLA/TPU using the FDM process

Lan Cao, Jianhua Xiao, Jin Kuk Kim and Xiaojie Zhang

CIRP Journal of Manufacturing Science and Technology, 2023, 41, 135
DOI: 10.1016/j.cirpj.2022.12.008

Applications of plastics in the automotive industry: Current trends and future perspectives

Hossein Abedsoltan

Polymer Engineering & Sci, 2024, 64, 929
DOI: 10.1002/pen.26604

Experimental Investigation on the Mechanical and Dynamic Thermomechanical Properties of Polyether Ether Ketone Based on Fused Deposition Modeling

Guocheng Liu, Ning Hu, Junjie Huang, Qiyong Tu and Fengxiang Xu

Polymers, 2024, 16, 3007
DOI: 10.3390/polym16213007

On Primary Recycled Dual Polymer-Based 3D Printed Functional Prototypes

Minhaz Husain, Kunal Gautam, Ranvijay Kumar and Rupinder Singh

J. Inst. Eng. India Ser. C, 2025, 106, 873
DOI: 10.1007/s40032-025-01184-x

Effects of Infill Density and Pattern on the Tensile Mechanical Behavior of 3D-Printed Glycolyzed Polyethylene Terephthalate Reinforced with Carbon-Fiber Composites by the FDM Process

Mohamed Daly, Mostapha Tarfaoui, Mountasar Bouali and Amine Bendarma

J. Compos. Sci., 2024, 8, 115
DOI: 10.3390/jcs8040115

Quantitative Insight into the Compressive Strain Rate Sensitivity of Polylactic Acid, Acrylonitrile Butadiene Styrene, Polyamide 12, and Polypropylene in Material Extrusion Additive Manufacturing

N. Vidakis, M. Petousis, I. Ntintakis, C. David, D. Sagris, N. Mountakis and A. Moutsopoulou

J. dynamic behavior mater., 2024, 10, 251
DOI: 10.1007/s40870-024-00418-w

Sustainable additive manufacturing: challenges and opportunities of recycling plastic waste for 3D printing filaments

Ashutosh Sharma, Manoj Kumar and Aditya Sharma

Sādhanā, 2025, 50
DOI: 10.1007/s12046-025-02669-2

Unraveling the Print–Structure–Property Relationships in the FFF of PEEK: A Critical Assessment of Print Parameters

Lucía Doyle, Javier García-Molleja, Juan Pedro Fernández-Blázquez and Carlos González

Polymers, 2025, 17, 1444
DOI: 10.3390/polym17111444

Effect of sample dimensions on the stiffness of PA12 Lattice materials fabricated using Powder Bed Fusion

L. Cobian, E. Maire, J. Adrien, U. Freitas, J.P. Fernández-Blázquez, M.A. Monclús and J. Segurado

Additive Manufacturing, 2024, 93, 104382
DOI: 10.1016/j.addma.2024.104382

Conversion Mapping by Raman Microscopy and Impact of Slice Overlap in Additive Manufacturing

Jason R. Gascooke, Daniel Mangos, Schannon Hamence, Jonathan A. Campbell and David A. Lewis

ACS Appl. Polym. Mater., 2022, 4, 200
DOI: 10.1021/acsapm.1c01204

Processing window modification in PEEK through CO2 plasticization: Towards hierarchical additive manufacturing

Lucía Doyle, Juan Pedro Fernández-Blázquez and Carlos González

The Journal of Supercritical Fluids, 2026, 230, 106866
DOI: 10.1016/j.supflu.2025.106866

Machine learning applied to the design and optimization of polymeric materials: A review

Sudarsan M. Pai, Karim A. Shah, Sruthi Sunder, Rodrigo Q. Albuquerque, Christian Brütting and Holger Ruckdäschel

Next Materials, 2025, 7, 100449
DOI: 10.1016/j.nxmate.2024.100449

Foaming behavior of polyamide 1212 elastomers/polyurethane composites with improved melt strength and interfacial compatibility via chain extension

Jun Lai, Feng Huang, An Huang, Tong Liu, Xiangfang Peng, Jianming Wu and Lihong Geng

Polymer Engineering & Sci, 2023, 63, 1082
DOI: 10.1002/pen.26265

Enhancing biofunctional coatings on selective laser sintered polyamide using pulsed laser deposition for implant applications

K. Hariharan, C. Chandrasekhara Sastry, N. Sathishkumar and K. Saravanan

Materials Chemistry and Physics, 2026, 350, 131906
DOI: 10.1016/j.matchemphys.2025.131906

Lattice Structures Built with Different Polygon Hollow Shapes: A Review on Their Analytical Modelling and Engineering Applications

Munashe Ignatius Chibinyani, Thywill Cephas Dzogbewu, Maina Maringa and Amos Muiruri

Applied Sciences, 2024, 14, 1582
DOI: 10.3390/app14041582

Exploring the possibilities of FDM filaments comprising natural fiber-reinforced biocomposites for additive manufacturing

Mahdi Rafiee, Roozbeh Abidnejad, Anton Ranta, Krishna Ojha, Alp Karakoç and Jouni Paltakari

AIMS Materials Science, 2021, 8, 524
DOI: 10.3934/matersci.2021032

Influence of Welding Control Mode on the Joint Performance of Ultrasonically Welded Carbon Fiber-Reinforced Polycarbonate

Zhaolong Zhang, Yuanduo Yang, Lunan Wei, Sansan Ao and Yang Li

Materials, 2026, 19, 1138
DOI: 10.3390/ma19061138

Non-pneumatic tire designs suitable for fused filament fabrication: an overview

Manuel Sardinha, Luís Reis, T. Ramos and M. Fátima Vaz

Procedia Structural Integrity, 2022, 42, 1098
DOI: 10.1016/j.prostr.2022.12.140

Biodegradable polymers and biocomposites in sustainable additive manufacturing: A review

Gokul Kannan, Rittin Abraham Kurien, Kamonchanok Khoklang, Pornsak Sriamornsak and Supakij Suttiruengwong

International Journal of Biological Macromolecules, 2025, 333, 148611
DOI: 10.1016/j.ijbiomac.2025.148611

Polymer Composites in Additive Manufacturing: Current Technologies, Applications, and Emerging Trends

Md Mahbubur Rahman, Safkat Islam, Mubasshira, Md Shaiful Islam, Raju Ahammad, Md Ashraful Islam, Md Abdul Hasib, Md Shohanur Rahman, Raza Moshwan, M. Monjurul Ehsan, Md Sanaul Rabbi, Md Moniruzzaman, Muhammad Altaf Nazir and Wei-Di Liu

Polymers, 2026, 18, 192
DOI: 10.3390/polym18020192

A comprehensive study on restoring properties in expired/aged ABS materials: advanced techniques, additive integration and challenges for sustainable industrial reuse and manufacturing

G. A. Munshi and Venkatesh M. Kulkarni

J Mater. Sci: Mater Eng., 2025, 20
DOI: 10.1186/s40712-025-00260-5

Competition between bead boundary fusion and crystallization kinetics in material extrusion-based additive manufacturing

Trystan Domenech, Pierre Ovlaque, Yves Trolez, Dominique Olivier, Benjamin Bujeau, Sébastien Charlon and Jérémie Soulestin

Additive Manufacturing, 2024, 92, 104395
DOI: 10.1016/j.addma.2024.104395

Revolutionising fabrication advances and applications of 3D printing with composite materials: a review

Ibrahim M. Alarifi

Virtual and Physical Prototyping, 2024, 19
DOI: 10.1080/17452759.2024.2390504

Printing the Future Layer by Layer: A Comprehensive Exploration of Additive Manufacturing in the Era of Industry 4.0

Cristina-Florena Bănică, Alexandru Sover and Daniel-Constantin Anghel

Applied Sciences, 2024, 14, 9919
DOI: 10.3390/app14219919

Advanced micro-/nano additive manufacturing of multi-materials

Honghao Xiang, Zihan Xu, Haojie Lu and Mingchao Zhang

Nano Research, 2026, 19, 94908451
DOI: 10.26599/NR.2026.94908451

A Study on Mechanical Properties of Low-Cost Thermoplastic-Based Materials for Material Extrusion Additive Manufacturing

Mihaela-Raluca Condruz, Alexandru Paraschiv, Teodor-Adrian Badea, Daniel Useriu, Tiberius-Florian Frigioescu, Gabriel Badea and Grigore Cican

Polymers, 2023, 15, 2981
DOI: 10.3390/polym15142981

Multivariate analysis of the mechanical properties of carbon fiber PLA composites using Box-Behnken design

Émerson dos Santos Passari, Carlos Henrique Lauermann, Bruno Nonemacher, Tiago de Bortoli and Matheus Dantas Santos

Rapid Prototyping Journal, 2026, 32, 311
DOI: 10.1108/RPJ-05-2025-0203

Grey relational analysis for optimizing fracture toughness properties of 3D-printed PLA/carbon fiber composites

Vishal Mishra, Nikhil Bharat, Dhinakaran Veeman and Vijay Kumar

Prog Addit Manuf, 2025, 10, 10077
DOI: 10.1007/s40964-025-01228-9

Wire Arc Additive Manufacturing – A revolutionary method in additive manufacturing

Nilesh Kumar, Het Bhavsar, P.V.S. Mahesh, Ashish Kumar Srivastava, Bhaskor J. Bora, Ambuj Saxena and Amit Rai Dixit

Materials Chemistry and Physics, 2022, 285, 126144
DOI: 10.1016/j.matchemphys.2022.126144

Kinetic modeling and reaction mechanisms of BPAF polycarbonate synthesis via melt Transesterification: Catalytic and Non-Catalytic Approaches

Bohan Liu, Baohe Wang, Zhaobang Zhang, Jing Zhu and Zhongfeng Geng

Chemical Engineering Journal, 2025, 507, 160531
DOI: 10.1016/j.cej.2025.160531

Enhanced Phase Change Heat Transfer with Fused Deposition Modeling (FDM) Printed Pit and Pillar (Pi2) Arrays

Seyed Alireza Rozati and Anju Gupta

Experimental Thermal and Fluid Science, 2025, 161, 111337
DOI: 10.1016/j.expthermflusci.2024.111337

Application of Additive Manufacturing in the Automobile Industry: A Mini Review

Jian Yang, Bo Li, Jian Liu, Zhantong Tu and Xin Wu

Processes, 2024, 12, 1101
DOI: 10.3390/pr12061101

Enhancing performances of natural zeolite-compounded thermoplastic polyurethane eco-composites through interfacial engineering

Yasin Kanbur, Sedef Sismanoglu, Diana Kindzera and Umit Tayfun

Journal of Composite Materials, 2025, 59, 2189
DOI: 10.1177/00219983251329737

Preparation Methods, Performance Improvement Strategies, and Typical Applications of Polyamide Foams

Suyuan Li, Shujun Jiang, Shun Gong, Shuo Ma, Hongfang Yang, Kai Pan and Jianping Deng

Ind. Eng. Chem. Res., 2021, 60, 17365
DOI: 10.1021/acs.iecr.1c03715

Facilitating the additive manufacture of high-performance polymers through polymer blending: A review

Dejana Pejak Simunec, Johnson Jacob, Ahmad E.Z. Kandjani, Adrian Trinchi and Antonella Sola

European Polymer Journal, 2023, 201, 112553
DOI: 10.1016/j.eurpolymj.2023.112553

Additive Manufacturing of Glass-Ceramic Parts from Recycled Glass Using a Novel Selective Powder Deposition Process

João Vasconcelos, Manuel Sardinha, Carlos M. S. Vicente and Luís Reis

Applied Sciences, 2022, 12, 13022
DOI: 10.3390/app122413022

Design of Hierarchical Architected Lattices for Enhanced Energy Absorption

Mohamad Al Nashar and Alok Sutradhar

Materials, 2021, 14, 5384
DOI: 10.3390/ma14185384

Production and 3D Printing of a Nanocellulose-Based Composite Filament Composed of Polymer-Modified Cellulose Nanofibrils and High-Density Polyethylene (HDPE) for the Fabrication of 3D Complex Shapes

Feras Dalloul, Jakob Benedikt Mietner and Julien R. G. Navarro

Fibers, 2022, 10, 91
DOI: 10.3390/fib10100091

Large-format additive manufacturing of polymer extrusion-based deposition systems: review and applications

Carlos M. S. Vicente, Manuel Sardinha, Luís Reis, António Ribeiro and Marco Leite

Prog Addit Manuf, 2023, 8, 1257
DOI: 10.1007/s40964-023-00397-9

Composite materials with MWCNT processed by Selective Laser Sintering for electrostatic discharge applications

A.C. Lopes, A.M. Sampaio and A.J. Pontes

Polymer Testing, 2022, 114, 107711
DOI: 10.1016/j.polymertesting.2022.107711

Sustainability and innovation in 3D printing: Outlook and trends

Muhammad Ali Saqib, Muhammad Sohail Abbas and Hiroyuki Tanaka

CTR, 2024, 4, 1
DOI: 10.3934/ctr.2024001

Machine learning for the intelligent analysis of 3D printing conditions using environmental sensor data to support quality assurance

Erik Westphal and Hermann Seitz

Additive Manufacturing, 2022, 50, 102535
DOI: 10.1016/j.addma.2021.102535

Analysis of the influence of printing parameters on the compression resistance of PLA in the FDM process

Émerson dos Santos Passari, Carlos Henrique Lauermann, André J. Souza, Fabio Pinto Silva and Rodrigo Rodrigues de Barros

RPJ, 2025, 31, 145
DOI: 10.1108/RPJ-04-2024-0165

Refined kinetic model for the simulation of polycarbonate synthesis via continuous melt transesterification

Bohan Liu, Dongwei Wei, Chunyan Wang, Baohe Wang and Jing Zhu

Chemical Engineering Science, 2024, 300, 120618
DOI: 10.1016/j.ces.2024.120618

A framework for the sustainability implications of 3D bioprinting through nature-inspired materials and structures

Ruban Whenish, Seeram Ramakrishna, Amit Kumar Jaiswal and Geetha Manivasagam

Bio-des. Manuf., 2022, 5, 412
DOI: 10.1007/s42242-021-00168-x

Flame Retardant Coatings: Additives, Binders, and Fillers

Mohd Meer Saddiq Mohd Sabee, Zarina Itam, Salmia Beddu, Nazirul Mubin Zahari, Nur Liyana Mohd Kamal, Daud Mohamad, Norzeity Amalin Zulkepli, Mohamad Danial Shafiq and Zuratul Ain Abdul Hamid

Polymers, 2022, 14, 2911
DOI: 10.3390/polym14142911

Recent advances in 3D printed smart and multifunctional textile materials: Processing, properties, and their applications

Bekinew Kitaw Dejene, Raphael Kanyire Seidu and Mulat Alubel Abtew

Reactive and Functional Polymers, 2026, 224, 106755
DOI: 10.1016/j.reactfunctpolym.2026.106755

A New Processing Method for Laser Sintering Polymer Powders at Low Bed Temperatures

Lanti Yang, Hao Gu and Zahir Bashir

Polymers, 2024, 16, 3301
DOI: 10.3390/polym16233301

Manufacturing and Thermal Shock Resistance of 3D-Printed Porous Black Zirconia for Concentrated Solar Applications

Fernando Almeida Costa Oliveira, Manuel Sardinha, José Galindo, José Rodríguez, Inmaculada Cañadas, Marco Leite and Jorge Cruz Fernandes

Crystals, 2023, 13, 1323
DOI: 10.3390/cryst13091323

Additive manufacturing in armor and military applications: research, materials, processing technologies, perspectives, and challenges

Henry A. Colorado, Carlos A. Cardenas, Elkin I. Gutierrez-Velazquez, Juan P. Escobedo and Sergio Neves Monteiro

Journal of Materials Research and Technology, 2023, 27, 3900
DOI: 10.1016/j.jmrt.2023.11.030

Optimisation of 3D Printing for Microcellular Polymers

Christian Andrew Griffiths, Andrew Rees, Adam Morgan and Feras Korkees

Polymers, 2023, 15, 3910
DOI: 10.3390/polym15193910

Enhancing sustainability and biodegradability of poly(butylene succinate) (PBS) composite filaments reinforced with cocoa bean shell residues

Robson Pinto Araújo, Cesar Augusto Gonçalves Beatrice, Eduardo Henrique Backes and Lidiane Cristina Costa

Polymer Composites, 2024, 45, 13650
DOI: 10.1002/pc.28725

Prospects of Natural Fiber-Reinforced Polymer Composites for Additive Manufacturing Applications: A Review

Sathish Kumar Adapa and Jagadish

JOM, 2023, 75, 920
DOI: 10.1007/s11837-022-05670-w

Acrylation of bioresources for 3D printing: strategies, technologies, and applications

Turdimuhammad Abdullah, Elif Cerrahoğlu Kaçakgil, Fatmagül Gedik, Volkan Mustafa Akbulut and Cemil Dizman

Progress in Materials Science, 2026, 158, 101641
DOI: 10.1016/j.pmatsci.2025.101641

Effects of build orientation and strain rate on the tensile-shear behaviour of polyamide-12 manufactured via laser powder bed fusion

Yuan Xu, Gustavo Quino, Karthik Ram Ramakrishnan and Antonio Pellegrino

Materials & Design, 2023, 232, 112162
DOI: 10.1016/j.matdes.2023.112162

Potential for microbial plastic degradation via assimilation of non-carbon moieties in additives

Dani Wijaya, Japareng Lalung, Syahidah Akmal Muhammad, Peter Convey, Faradina Merican, Fauziah Shahul Hamid and Faisal Allafi

Biotechnology Advances, 2025, 83, 108620
DOI: 10.1016/j.biotechadv.2025.108620

Mechanical Characterization of 3D Printed Honeycombs with Planar Ribs for Enhanced Energy Absorption

Bhaskar K C, Nava Raj Khatri and Paul Egan

Adv Eng Mater, 2025, 27
DOI: 10.1002/adem.202501321

Assessing the capabilities of ChatGPT to improve additive manufacturing troubleshooting

Silvia Badini, Stefano Regondi, Emanuele Frontoni and Raffaele Pugliese

Advanced Industrial and Engineering Polymer Research, 2023, 6, 278
DOI: 10.1016/j.aiepr.2023.03.003

Book 1. Biopolymer conjugates industrial applications Chapter 1. Biopolymeric conjugation with thermoplastics and applications

Witta Kartika Restu, Muhammad Ghozali, Evi Triwulandari, Yulianti Sampora, Melati Septiyanti, Yenny Meliana, Sun Theo C. L. Ndruru, Muhammad Ihsan Sofyan, Nanang Masruchin and Anita Marlina

Physical Sciences Reviews, 2024, 9, 3117
DOI: 10.1515/psr-2022-0180

Build Orientation-Driven Anisotropic Fracture Behaviour in Polymer Parts Fabricated by Powder Bed Fusion

Karthik Ram Ramakrishnan and Jagan Selvaraj

JMMP, 2024, 8, 263
DOI: 10.3390/jmmp8060263

Sandwich printing of PLA and carbon fiber reinforced-PLA for enhancing tensile and impact strength of additive manufactured parts

Madheswaran Subramaniyan, Sivakumar Karuppan, Anandhamoorthy Appusamy and Nagarajan Pitchandi

Journal of Manufacturing Processes, 2025, 137, 425
DOI: 10.1016/j.jmapro.2025.02.001

Top-Down Stereolithography-Based System for Additive Manufacturing of Zirconia for Dental Applications

Kumiko Yoshihara, Noriyuki Nagaoka, Fiona Spirrett, Yukinori Maruo, Yasuhiro Yoshida, Bart Van Meerbeek and Soshu Kirihara

Applied Sciences, 2025, 15, 6155
DOI: 10.3390/app15116155

Recent advances of additive manufacturing in implant fabrication – A review

Md Hosne Mobarak, Md. Aminul Islam, Nayem Hossain, Md. Zobair Al Mahmud, Md. Thohid Rayhan, Nushrat Jahan Nishi and Mohammad Asaduzzaman Chowdhury

Applied Surface Science Advances, 2023, 18, 100462
DOI: 10.1016/j.apsadv.2023.100462

Advancing FDM 3D Printing Simulations: From G-Code Conversion to Precision Modelling in Abaqus

Taoufik Hachimi, Fouad Ait Hmazi, Fatima Ezzahra Arhouni, Hajar Rejdali, Yahya Riyad and Fatima Majid

JMMP, 2025, 9, 338
DOI: 10.3390/jmmp9100338

An Approach to FFF Elastic Properties Based on Classical Laminate Theory

Victor Justen da Silveira Machado and Daniel Carlos Taissum Cardoso

Polymer Engineering & Sci, 2026, 66, 1309
DOI: 10.1002/pen.70279

Simulation-driven optimization for additive manufacturing in aerospace and automotive applications

Smaran Kalakoti, Tanyu Donarld Kongnyui, Debashish Gogoi, Jayanth Kumar Madem, Nidhi Yadav and Manjesh Kumar

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2026
DOI: 10.1177/14644207261423799

Impact of gamma radiation on the thermal and mechanical properties of additively manufactured PA12 composites

Elizabeth Getto, Logan C. Schoffstall, Sidney Hall-Smith, Conner M. Kinnaman, Miaomiao Ma, Jennifer Harnage, Jonathan Slager, Bradford W. Baker, Peter J. Joyce and David P. Durkin

Int J Adv Manuf Technol, 2025, 140, 6107
DOI: 10.1007/s00170-025-16483-x

Extrusion Based 3D Printing of Sustainable Biocomposites from Biocarbon and Poly(trimethylene terephthalate)

Elizabeth Diederichs, Maisyn Picard, Boon Peng Chang, Manjusri Misra and Amar Mohanty

Molecules, 2021, 26, 4164
DOI: 10.3390/molecules26144164

In situ X-ray diffraction and thermal simulation of material extrusion additive manufacturing of polymer

Weiguang Wang, Yanhao Hou, Jiong Yang, Zhengyu Yan, Fengyuan Liu, Cian Vyas, Wajira Mirihanage and Paulo Bartolo

Materials & Design, 2024, 245, 113255
DOI: 10.1016/j.matdes.2024.113255

Advances in oil palm shell fibre reinforced thermoplastic and thermoset polymer composites

Tata Alfatah, Eka Marya Mistar, Maliya Syabriyana and Muhammad Dani Supardan

Alexandria Engineering Journal, 2022, 61, 4945
DOI: 10.1016/j.aej.2021.09.061

Design and industrial implementation of a multi-functional part produced by powder bed fusion

A. C. Lopes, A. M. Sampaio, F. Fernandes, P. M. Vaz and A. J. Pontes

Prog Addit Manuf, 2024, 9, 935
DOI: 10.1007/s40964-023-00493-w

Realizing semicrystalline polymer physics across disparate processing scales: From desktop extrusion to large-format additive manufacturing

Daniel A. Heinze, Arit Das, Christopher B. Williams, Claire McIlroy, Amy M. Peterson and Michael J. Bortner

Progress in Polymer Science, 2026, 172, 102053
DOI: 10.1016/j.progpolymsci.2025.102053

An overview of fused filament fabrication technology and the advancement in PLA-biocomposites

Mahendran Samykano, Rajan Kumaresan, Jeevendran Kananathan, Kumaran Kadirgama and Adarsh Kumar Pandey

Int J Adv Manuf Technol, 2024, 132, 27
DOI: 10.1007/s00170-024-13394-1

The Development of Processing Methods and Materials Used for Non-Pneumatic Tires: A Review

Meng Sun, Haolong Zhong, Kangpei Qin, Ting Xu, Wengang Yang, Yu Zhang and Lei Lu

Materials, 2024, 17, 5660
DOI: 10.3390/ma17225660