Issue 36, 2023

Liquid metal-based printing synthesis of bismuth-doped gallium oxide and its application for a photodetector

Abstract

Two-dimensional gallium oxide (Ga2O3) is a promising material with diverse applications, but its development and application are hindered by the complicated synthesis process of 2D Ga2O3 film. However, the van der Waals printing method, which employs liquid metal as a platform, can simply synthesize large-scale and high-quality 2D oxide films with ease. Moreover, the band structure of oxide films can be modulated through doping during the printing process, broadening their applications. In this study, pure and doped Ga2O3 films have been successfully synthesized by using Bi–Ga alloys with different ratios (0 wt% Bi, 1 wt% Bi, 10 wt% Bi, 15 wt% Bi) via the van der Waals printing method. Furthermore, the modulation of the band structure of Ga2O3 films by doping ranging from 5.23 eV to 4.88 eV is systematically investigated. Photodetectors based on Ga2O3 films with a controllable band structure have been fabricated, which demonstrated good sensing performance with a responsivity of 959 mA W−1, detectivity of 3.43 × 1011 Jones, and response/recovery time of 13 ms/18 ms. This printing method provides a straightforward, low-cost, and high-efficiency strategy for synthesizing and doping 2D oxide films, which could advance their practical applications.

Graphical abstract: Liquid metal-based printing synthesis of bismuth-doped gallium oxide and its application for a photodetector

Supplementary files

Article information

Article type
Communication
Submitted
08 Հլս 2023
Accepted
26 Օգս 2023
First published
30 Օգս 2023

J. Mater. Chem. C, 2023,11, 12156-12162

Liquid metal-based printing synthesis of bismuth-doped gallium oxide and its application for a photodetector

K. Huang, L. Guo, L. Liu, X. Chen, C. Su, P. Li, Z. Deng, W. Wu and L. Zhang, J. Mater. Chem. C, 2023, 11, 12156 DOI: 10.1039/D3TC02405A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements