Issue 6, 2021

Electrostatically self-assembled two-dimensional magnetized MXene/hollow Fe3O4 nanoparticle hybrids with high electromagnetic absorption performance and improved impendence matching

Abstract

Electromagnetic pollution often interferes with the normal use of sophisticated electric devices leading to the necessity of developing electromagnetic wave absorbers with light weight and strong absorption ability. Herein, we synthesized two-dimensional magnetized MXene hybrids by electrostatic assembly of negatively charged few-layered Ti3C2Tx (MXene) with positively charged hollow Fe3O4 nanoparticles (HFO). The few-layered MXene was obtained by etching Ti3AlC2via a modified LiF–HCl method followed by a sonication process, while HFO was fabricated by a facile hydrothermal process. The MXene/HFO hybrids were light weight and achieved a high EM wave absorption performance (RLmin of −63.7 dB at a thin thickness of 1.56 mm). Moreover, the strong EM wave attenuation resulted from the synergistic effect arising from dielectric loss, magnetic loss, interface polarization and improved impedance matching. Therefore, the as-prepared magnetized MXene hybrids are expected to be candidates for high performance electromagnetic microwave absorbers.

Graphical abstract: Electrostatically self-assembled two-dimensional magnetized MXene/hollow Fe3O4 nanoparticle hybrids with high electromagnetic absorption performance and improved impendence matching

Supplementary files

Article information

Article type
Paper
Submitted
29 Հկտ 2020
Accepted
15 Դկտ 2020
First published
16 Դկտ 2020

J. Mater. Chem. A, 2021,9, 3500-3510

Electrostatically self-assembled two-dimensional magnetized MXene/hollow Fe3O4 nanoparticle hybrids with high electromagnetic absorption performance and improved impendence matching

B. Deng, Z. Liu, F. Pan, Z. Xiang, X. Zhang and W. Lu, J. Mater. Chem. A, 2021, 9, 3500 DOI: 10.1039/D0TA10551A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements