Issue 2, 2019

Raw material recovery from hydraulic fracturing residual solid waste with implications for sustainability and radioactive waste disposal

Abstract

Unconventional oil and gas residual solid wastes are generally disposed in municipal waste landfills (RCRA Subtitle D), but they contain valuable raw materials such as proppant sands. A novel process for recovering raw materials from hydraulic fracturing residual waste is presented. Specifically, a novel hydroacoustic cavitation system, combined with physical separation devices, can create a distinct stream of highly concentrated sand, and another distinct stream of clay from the residual solid waste by the dispersive energy of cavitation conjoined with ultrasonics, ozone and hydrogen peroxide. This combination cleaned the sand grains, by removing previously aggregated clays and residues from the sand surfaces. When these unit operations were followed by a hydrocyclone and spiral, the solids could be separated by particle size, yielding primarily cleaned sand in one flow stream; clays and fine particles in another; and silts in yet a third stream. Consequently, the separation of particle sizes also affected radium distribution – the sand grains had low radium activities, as lows as 0.207 Bq g−1 (5.6 pCi g−1). In contrast, the clays had elevated radium activities, as high as 1.85–3.7 Bq g−1 (50–100 pCi g−1) – and much of this radium was affiliated with organics and salts that could be separated from the clays. We propose that the reclaimed sand could be reused as hydraulic fracturing proppant. The separation of sand from silt and clay could reduce the volume and radium masses of wastes that are disposed in landfills. This could represent a significant savings to facilities handling oil and gas waste, as much as $100 000–300 000 per year. Disposing the radium-enriched salts and organics downhole will mitigate radium release to the surface. Additionally, the reclaimed sand could have market value, and this could represent as much as a third of the cost savings. Tests that employed the toxicity characteristic leaching protocol (TCLP) on these separated solids streams determined that this novel treatment diminished the risk of radium mobility for the reclaimed sand, clays or disposed material, rendering them better suited for landfilling.

Graphical abstract: Raw material recovery from hydraulic fracturing residual solid waste with implications for sustainability and radioactive waste disposal

Supplementary files

Article information

Article type
Paper
Submitted
04 Հնս 2018
Accepted
27 Օգս 2018
First published
01 Նյմ 2018

Environ. Sci.: Processes Impacts, 2019,21, 308-323

Author version available

Raw material recovery from hydraulic fracturing residual solid waste with implications for sustainability and radioactive waste disposal

M. A. Ajemigbitse, F. S. Cannon, M. S. Klima, J. C. Furness, C. Wunz and N. R. Warner, Environ. Sci.: Processes Impacts, 2019, 21, 308 DOI: 10.1039/C8EM00248G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements