Issue 1, 2020

A minimal benzo[c][1,2,5]thiadiazole-based electron acceptor as a third component material for ternary polymer solar cells with efficiencies exceeding 16.0%

Abstract

Ternary polymer solar cells (PSCs) with three active layer components (two donors with one acceptor, or two acceptors with one donor) have been demonstrated as an emerging strategy to improve the power conversion efficiencies (PCEs). So far, most of the third components utilized in the ternary PSCs are relatively complex molecules or polymers which are expensive due to complicated multi-step syntheses. Here, a simple small molecule of 4,7-bis(5-bromothiophen-2-yl)-5,6-difluorobenzo[c][1,2,5]thiadiazole (BTF), is first used as a second acceptor material to fabricate efficient ternary PSCs. The incorporation of BTF into a binary active layer based on a wide-bandgap polymer of J71 and a low-bandgap acceptor of ITIC, results in ternary PSCs with the best PCE of 12.35%, which is higher than the control J71:ITIC-based binary device with the best PCE of 10.79%. This significantly enhanced PCE results from the simultaneously improved short-circuit current density, open-circuit voltage, and fill factor in the ternary PSCs, and they are in part attributed to the increased light-harvesting with the BTF incorporation and in part attributed to the more balanced charge transportation induced by the improved polymer crystallinity. To determine the generality of BTF as a second acceptor in ternary PSCs, another benchmark binary active layer of PM6:Y6 has been incorporated with 10 wt% BTF, leading to a best-performance device with an outstanding PCE of 16.53% which is the highest among all ternary PSCs, to the best of our knowledge. Our work provides a simple strategy to efficiently boost the performance of ternary PSCs by using an easily available, low-cost acceptor of BTF.

Graphical abstract: A minimal benzo[c][1,2,5]thiadiazole-based electron acceptor as a third component material for ternary polymer solar cells with efficiencies exceeding 16.0%

Supplementary files

Article information

Article type
Communication
Submitted
27 jún. 2019
Accepted
29 júl. 2019
First published
29 júl. 2019

Mater. Horiz., 2020,7, 117-124

A minimal benzo[c][1,2,5]thiadiazole-based electron acceptor as a third component material for ternary polymer solar cells with efficiencies exceeding 16.0%

Y. Ma, X. Zhou, D. Cai, Q. Tu, W. Ma and Q. Zheng, Mater. Horiz., 2020, 7, 117 DOI: 10.1039/C9MH00993K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements