Issue 24, 2021

A synergistic self-assembly strategy to fabricate thermally stable OPAN/PI composite aerogels for particulate matter removal

Abstract

The development of low-cost nanofiber aerogels with good mechanical and thermal properties is essential for practical applications in the fields of heat insulation, air filtration, etc. In this study, we prepared pre-oxidized polyacrylonitrile/polyimide (OPAN/PI) composite aerogels with good thermal stability and mechanical properties by a simple synergistic strategy. A small amount of PI was used as a binder to successfully construct the porous structure of the nanofiber network. The obtained aerogel material exhibited excellent resilience, which can withstand 500 cycles of compression. In addition, the samples had an extremely low thermal conductivity (≈27 mW (m k)−1) and a high limiting oxygen index (LOI > 36), showing improved thermal stability. It also had a high filtration efficiency for particulate matter while maintaining a low pressure drop owing to the hierarchical porous structure, and the filtration efficiency for PM2.5 can reach 99.46%. More importantly, it displayed a high dust-holding capacity, reaching approximately 90 g m−2 due to the high porosity and pore volume. In short, the material shows great application potential in the field of high temperature filtration, heat insulation and flame retardants.

Graphical abstract: A synergistic self-assembly strategy to fabricate thermally stable OPAN/PI composite aerogels for particulate matter removal

Supplementary files

Article information

Article type
Research Article
Submitted
03 srp 2021
Accepted
19 lis 2021
First published
23 lis 2021

Mater. Chem. Front., 2021,5, 8308-8318

A synergistic self-assembly strategy to fabricate thermally stable OPAN/PI composite aerogels for particulate matter removal

S. Qiao, S. Kang, J. Zhu, Y. Wang, J. Yu and Z. Hu, Mater. Chem. Front., 2021, 5, 8308 DOI: 10.1039/D1QM00974E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements