Issue 8, 2024

Enhanced production of aromatics from syngas over CoMnAl oxides combined with b-axis thickness tailored HZSM-5

Abstract

The direct conversion of syngas to aromatics has a promising industrial future and can be achieved using bifunctional catalysts through olefin intermediates. However, the development of bifunctional catalysts with high aromatics yields remains a great challenge. In this work, we synthesized a series of HZSM-5 zeolites with different morphologies and pore structures and coupled them with CoMnAl oxides, which contain Co2C nanoprisms as the active phase and are highly efficient syngas to olefin catalysts, for aromatics synthesis directly from syngas. We demonstrate that a decreasing b-axis thickness and an appropriate density of Brønsted acid sites of HZSM-5 favors the syngas conversion to aromatics via bifunctional catalysis. The bifunctional catalysts with the smallest b-axis thickness of HZSM-5 zeolite of approximately 37 nm achieve a CO conversion of more than 70% under mild reaction conditions of 280 °C and 2.0 MPa, with high stability. The selectivity toward aromatics is higher than 65% with 3.5% selectivity toward by-product CH4 and the aromatics yield is up to 27.1%. This study provides an exemplary new strategy for the efficient synthesis of aromatic hydrocarbons from syngas.

Graphical abstract: Enhanced production of aromatics from syngas over CoMnAl oxides combined with b-axis thickness tailored HZSM-5

Supplementary files

Article information

Article type
Research Article
Submitted
20 जनवरी 2024
Accepted
12 मार्च 2024
First published
12 मार्च 2024

Mater. Chem. Front., 2024,8, 2011-2020

Enhanced production of aromatics from syngas over CoMnAl oxides combined with b-axis thickness tailored HZSM-5

R. Guo, J. Liu, H. Wang, X. Yu, J. Zhang, C. Yang, J. Li, Y. Sun and P. Gao, Mater. Chem. Front., 2024, 8, 2011 DOI: 10.1039/D4QM00059E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements