Issue 1, 2022

Controlling mechanical properties of 3D printed polymer composites through photoinduced reversible addition–fragmentation chain transfer (RAFT) polymerization

Abstract

Reversible addition–fragmentation chain-transfer (RAFT) polymerization has been widely exploited to produce homogeneous and living polymer networks for advanced material design. In this work, we incorporate silica nanoparticles (SNPs) into a RAFT polymerization system to prepare a series of photocurable composite resins. These resins are applied to stereolithographic 3D printing to produce composite materials with enhanced mechanical properties. Relatively high loadings of SNPs (30 wt%) within the resins are achieved, allowing an increase in the 3D printed composite material tensile strength by 165% while simultaneously increasing the fracture toughness by 168%, compared with the pristine polymer materials. In addition, the inclusion of small amounts (1 wt%) of RAFT agent into the 3D printing resins also provide efficient control over thermomechanical, tensile, and fracture properties of the resulting materials. In particular, 3D printed SNP composite materials containing 30 wt% SNPs and 1 wt% RAFT show a 37% increase in elongation at break values and a 60% increase in tensile strength compared with free radical polymerization-based counterparts. The increased ductility of composite materials imparted via RAFT agent addition has not been reported and could provide a useful tool for optimizing the performance of composite materials prepared by 3D printing. Additionally, photoinduced reactivation of thiocarbonylthio groups provides access to spatially controlled post-printing functionalization of the surface of the composite materials. As such, RAFT-mediated 3D printing of composite resins is shown to be an effective strategy for developing composite materials with arbitrary combinations of well-defined mechanical properties and diverse chemical functionalities for material post-modification.

Graphical abstract: Controlling mechanical properties of 3D printed polymer composites through photoinduced reversible addition–fragmentation chain transfer (RAFT) polymerization

Supplementary files

Article information

Article type
Paper
Submitted
24 सितम्बर 2021
Accepted
13 अक्तूबर 2021
First published
13 अक्तूबर 2021

Polym. Chem., 2022,13, 44-57

Controlling mechanical properties of 3D printed polymer composites through photoinduced reversible addition–fragmentation chain transfer (RAFT) polymerization

X. Shi, J. Zhang, N. Corrigan and C. Boyer, Polym. Chem., 2022, 13, 44 DOI: 10.1039/D1PY01283E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements