Issue 18, 2016

Design of CO2 sorbents using functionalized fibrous nanosilica (KCC-1): insights into the effect of the silica morphology (KCC-1 vs. MCM-41)

Abstract

Hybrid materials by functionalization of fibrous nanosilica (KCC-1) were synthesized for efficient CO2 capture, using various amine molecules by physisorption (ads.) as well as covalent attachment. Their CO2 capture efficiency was studied using various parameters, such as CO2 capture capacity, kinetics of adsorption, stability of the sorbent, and regeneration-reuse properties. The best KCC-1 sorbent (i.e., KCC-1-TEPAads) was then studied for the effects of solvents, adsorption temperature and TEPA (tetraethylene pentamine) loading on its textural properties and CO2 capture efficiency and compared with its MCM-41 counterparts. The textural properties of MCM-41 sorbents were drastically affected with loss of more than 99% of their surface area and pore volume, while KCC-1 based sorbents were able to retain a good amount of surface area and pore volume. Notably, the KCC-1-based sorbents exhibited better CO2 capture capacity, rate of adsorption and stability than their MCM-41 counterparts (MCM-41/TEPAads). The total CO2 capture capacity after 21 cycles under humid conditions was 91.5 mmol g−1 for KCC-1-TEPAads but 73.1 mmol g−1 for MCM-41-TEPAads, indicating the superior capacity and stability of the KCC-1-based sorbents even under humid conditions. The better performance of the KCC-1-based sorbents was due to their unique fibrous morphology, accessible surface area and pore volume, which were retained even after functionalization. These results indicate the critical role of the silica morphology as well as the advantages of KCC-1 silica over MCM-41 for the design of efficient CO2 sorbents.

Graphical abstract: Design of CO2 sorbents using functionalized fibrous nanosilica (KCC-1): insights into the effect of the silica morphology (KCC-1 vs. MCM-41)

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
14 फरवरी 2016
Accepted
25 फरवरी 2016
First published
08 मार्च 2016

J. Mater. Chem. A, 2016,4, 7005-7019

Design of CO2 sorbents using functionalized fibrous nanosilica (KCC-1): insights into the effect of the silica morphology (KCC-1 vs. MCM-41)

B. Singh and V. Polshettiwar, J. Mater. Chem. A, 2016, 4, 7005 DOI: 10.1039/C6TA01348A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements