Issue 22, 2016

Ultra-small B2O3 nanocrystals grown in situ on highly porous carbon microtubes for lithium–iodine and lithium–sulfur batteries

Abstract

B2O3-modified carbon microtubes, which possess a highly porous structure and well-dispersed ultra-small B2O3 nanocrystals (ca. <5 nm) in the tube wall, are successfully fabricated via a facile thermal-treated process from poplar catkin, and then investigated for the first time as a capture interlayer for lithium–iodine (Li–I2) and lithium–sulfur (Li–S) batteries. After introduction of the B2O3/carbon microtube composite interlayer, the iodine cathode demonstrates a reversible capacity of 176.9 mA h g−1 after 500 cycles at a rate of 20C. When the rate increases to 100C, a high capacity of 140.7 mA h g−1 can still be obtained after 5000 cycles, which makes this the most stable iodine cathode reported for Li–I2 batteries to date. For Li–S batteries, the sulfur cathodes present excellent cycling performance with a high discharge capacity of 594 mA h g−1 at the rate of 4C. Such excellent cycle stability for the Li–S and Li–I2 batteries could be mainly attributed to strong interactions between the ultra-small B2O3 nanocrystals and polysulfide or iodine ions, which has been proven using first principle calculations.

Graphical abstract: Ultra-small B2O3 nanocrystals grown in situ on highly porous carbon microtubes for lithium–iodine and lithium–sulfur batteries

Supplementary files

Article information

Article type
Communication
Submitted
25 जनवरी 2016
Accepted
06 मई 2016
First published
09 मई 2016

J. Mater. Chem. A, 2016,4, 8541-8547

Ultra-small B2O3 nanocrystals grown in situ on highly porous carbon microtubes for lithium–iodine and lithium–sulfur batteries

Z. Su, C. Tong, D. He, C. Lai, L. Liu, C. Wang and K. Xi, J. Mater. Chem. A, 2016, 4, 8541 DOI: 10.1039/C6TA00706F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements